Used Belt Saw for sale (14,709)

Condition: excellent (used), Omga V 113 P double mitre saw for frames Double saw set at a 45-degree angle Saw blade diameter: 300 mm Saw blade bore diameter: 30 mm Two motors, each with 1.1 kW power Maximum cutting width: 70 mm Maximum cutting height: 75 mm Kedpfxjyaa Uyj Adwowt Pneumatic material clamps

Condition: excellent (used), functionality: fully functional, saw blade diameter: 350 mm, cutting height (max.): 80 mm, cutting width (max.): 80 mm, Double mitre saw ALFAMACCHINE T350 CE Ksdpex U R Rcjfx Adwswt Double saw for cutting at 45° angles Blade diameter: 350 mm Blade bore: 30 mm Blade speed: 3000 rpm Motors: 2×1.5 kW Air requirement: 5-7 bar Cutting width: 15-80 mm Cutting height: 10-80 mm Machine dimensions: 320x70x152 cm

Condition: excellent (used), CATALOG NUMBER 7857 Technical data: - Maximum workpiece width: 1100 mm - Maximum workpiece height: 160 mm 2 sanding units: – From above: - Rubber pressure roller, smooth 1) Calibrating grooved rubber roller - Rubber pressure roller 2) Grooved rubber roller + pad + metal roller - Rubber pressure roller - Total unit power: 15 kW – From below: Kwjdpfx Adjx Ifgrswjt - 3 driven rubber feed rollers - Feed belt - 3 driven rubber feed rollers - Sanding thickness potentiometer - Pneumatic belt oscillation - Table elevation: electric + manual (for precise adjustment) - 2 feed speeds - With pneumatic brake - Working pressure: 6-8 bar - Extraction port diameter: 2 x 140 mm - Overall dimensions (L/W/H): 1650 x 1960 x 2100 mm - Weight: 1250 kg ADVANTAGES – Not repainted – Czech production – 2 sanding units – Original operator’s manual (DTR) – Used sander, in very good condition Net price: 36,900 PLN Net price: 8,790 EUR Net price calculated at exchange rate: 4.2 PLN/EUR (Price may change if the exchange rate fluctuates significantly)

Condition: excellent (used), CATALOG NUMBER 7818 Technical data: - Max. working width: 1100mm - Max. working height: 180mm Kwodpfx Aox Dbh Iedwet 2 units: 1) Grooved rubber roller for calibration 2) Grooved rubber roller for calibration – Top side: - Metal pressure roller - Unit - Metal pressure roller - Unit - Metal pressure roller – Bottom side: - 2 rubber sliding rollers - Feed belt - 2 rubber sliding rollers - Pneumatic belt oscillation - Electric table lifting - Sanding thickness potentiometer - 2 feed speeds - Feed motor: 0.80 kW - Main motor: 10kW - Operating pressure: 6–8 bar - Extraction port diameter: 2x155mm - Overall dimensions (LxWxH): 1670x1740x2040mm - Weight: 1200kg ADVANTAGES – Made in Italy – Sanding thickness potentiometer – 2 sanding units – Used sander, very good condition Net price: 25,900 PLN Net price: 6,160 EUR based on an exchange rate of 4.2 PLN/EUR (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number 7756 TECHNICAL DATA - Max. blade diameter: 400 mm - Blade guard - Blade bore diameter: 30 mm - Max. workpiece diameter with 400 mm blade: 130 mm Kjdpfxjxhcrpe Adwjwt - Motor approx. 5.5 kW - Feed motor: 1.1 kW - 3 feed speeds + forward/backward - Dimensions (L/W/H): 1500x1300x1300 mm - Weight: 530 kg ADVANTAGES – For palisades – With pointing device – Easy to operate – Occupies little space – Used saw, very good condition Net price: 8,900 PLN Net price: 2,120 EUR depending on exchange rate of 4.2 EUR (Prices subject to change with stronger fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7603 TECHNICAL SPECIFICATIONS - automatic sharpening speed - tooth counter - suitable for wide band - grinding wheel size: 240 mm - motor power: 0.12 kW, 0.75 kW, 400 V - dimensions (L/W/H): 3600x1600x1500 mm - weight: 140 kg ADVANTAGES – made in Poland – with tooth counter – for wide band – unpainted – used sharpening machine – in very good condition Net price: 6900 PLN Net price: 1640 EUR based on an exchange rate of 4.2 EUR Kwsdpfxjyarcij Adwet (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number: 7549 TECHNICAL DATA Max width of workpiece: 1100mm Max height of workpiece: 170mm 2 units: 1) Grooved rubber roller for calibration 2) Rubber roller + pad + metal roller – from above: Metal roller, sliding Working unit Metal roller, sliding Unit with pad Output metal roller, sliding – from below: Feed belt Pneumatic belt oscillation Electric table lifting 2 feed speeds Motor: 11kW With pneumatic brake Working pressure: 6-8 bar Extractor outlet diameter: 2x150mm Overall dimensions (L/W/H): 1960x1700x2000mm Weight approx.: 2000kg – German manufacture – 2 units – not repainted Kodeyaq Rfjpfx Adwswt – Used sander, very good condition Net price: 34,900 PLN Net price: 8,300 EUR at 4.2 EUR rate (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7541 Technical Specifications: - Maximum diameter of main saw blade (without scorer): 400mm - Maximum diameter of main saw blade (with scorer): 350mm - Blade bore diameter: 30mm - Maximum cutting height for 400mm blade: at 90 degrees – 120mm, at 45 degrees – 85mm - Maximum cutting height for 350mm blade: at 90 degrees – 95mm, at 45 degrees – 67mm - Main blade adjustable vertically and for angle - Blade guard - Equipped with side sliding table - Cutting length on sliding table: 1700mm - Cutting width on sliding table: 1400mm - Cutting width at fence: 1350mm - Main motor power: 6kW - Table dimensions: 1190x990mm - With table extension: 1880mm - With table enlargement: 1890mm - With scorer unit Kedpfx Asyaq Nhsdwewt - Maximum scorer blade diameter: 120mm - Scorer spindle diameter: 20mm - Scorer motor power: 0.75kW - Three spindle speeds: 3500, 4500, 6000 rpm - Brake - Extraction port diameter: 80, 120mm - Machine dimensions (LxWxH): 3050x2200x1600mm - Weight: 800kg ADVANTAGES – Manufactured in Poland – DTR documentation included – Blade guard – Equipped with scorer unit – With table extension and enlargement – Used saw, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (based on exchange rate 4.2 EUR) (Prices may change with significant rate fluctuations)

Condition: excellent (used), TECHNICAL DATA - track width 300mm - shaft width 330mm - max saw blade diameter 300mm - blade bore diameter 70mm Kwodjyaq Iwspfx Adwst - max cutting height 90mm - table width with extension 720mm - table length 1800mm * from above: - 2 rows of pawls - smooth metal sliding roller - planing shaft 320mm, 4-knife shaft 7.5kW - head with pneumatic brake - hold-down system - shaft with saw blades - smooth metal sliding roller * from below: - pawls - track - pneumatically adjustable pressure and sliding rollers - central lubrication - feed motor 0.75kW - main motor 30kW - overall dimensions (LxW xH) 1870x1370x1600mm - weight approx. 2500kg ADVANTAGES – planing shaft 320mm with 4-knife head – central track lubrication – solid construction – used multi-blade saw in very good condition Net price: 29,900 PLN Net price: 7,120 EUR depending on exchange rate 4.2 EUR (Prices may change with larger fluctuations)

Condition: excellent (used), CATALOG NUMBER 7651 Technical data: - Track width: 250mm - Shaft width: 250mm - Max saw blade diameter: 400mm - Saw blade bore diameter: 70mm - Max cutting height: 120mm - Table width with opening: 810mm - Table length: 1780mm – From above: - Pawls/kickers - Smooth pressure shaft - Pawls - Smooth pressure shaft - Shaft with saw blades - Smooth pressure shafts, 2 pcs – From below: - Guide - Pawls/kickers - Track - Central lubrication - Stepless feed speed adjustment - Feed motor 1.1kW - Main motor 37kW - Manual body lifting Kwedoyaq Idopfx Adwot - Manual lifting of shaft with saw blades - Chip extraction connection diameter: 200mm - Overall dimensions (L/W/H): 2150x1480x1760mm - Weight: 1735kg ADVANTAGES – German-made – Stepless feed speed adjustment – Multi-blade saw, used, in very good condition Net price: 46,900 PLN Net price: 11,160 EUR (at a rate of 4.25 EUR) (Prices may change depending on exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7652 Technical specifications: - Track width: 350mm - Cutting width: 370mm - Blade diameter: 400 to 450mm - Cutting height for 350/400mm blade: 160mm - Spindle diameter: 70mm - Table dimensions: 1850x800mm - Height from base to table: 750mm Top section: - Pawls/deflectors - 2 smooth, metal sliding shafts - Shaft with saw blades - 3 smooth, metal sliding shafts Bottom section: - Guide bar - Pawls/deflectors - Track - Toothed, extracting drive shaft - Electric body height adjustment - Central lubrication - Stepless speed adjustment via inverter - Feed motor: 2.2kW - Main motor: 55kW - Extraction nozzle diameter: 200mm - Overall dimensions (L/W/H): 2560x1700x1900mm - Weight: 2700kg ADVANTAGES – Made in Germany – Technical documentation (DTR) – Used multi-blade saw – Very good condition Net price: 39,900 PLN Kwedpfx Adjyaq H Hjwjt Net price: 9,500 EUR depending on an exchange rate of 4.2 EUR (Prices may vary with major currency fluctuations)

Condition: excellent (used), CATALOGUE NUMBER: 7480 Technical data: - Track width: 360mm - Shaft width: 350mm - Max. disc diameter: 350mm - Disc bore diameter: 80mm - Max. cutting height: 120mm - Table size: 2040x1220mm Top section: - Pawls - Driven, toothed shaft - Pawls - Shaft with saw blades - Slip/pressure shaft Bottom section: - Rollers in front of the table, 2 pcs - Guide rail - Pawls - Track - Central track lubrication - Electric lifting of the saw shaft - Electric body lifting - Stepless feed speed control - Extraction port diameter: 140mm, 160mm - Main motor: 30kW - Overall dimensions (L/W/H): 2600x2300x1850mm - Weight approx. 4000kg ADVANTAGES – Czech manufacture – Used multirip saw – Very good condition Net price: 33,900 PLN Kodpfx Aeuzu T Tjdwowt Net price: 8,070 EUR (depending on the 4.2 exchange rate) (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number: 7548 TECHNICAL DATA Track width: 250 mm Shaft width: 250 mm Max saw blade diameter: 350 mm Saw blade bore diameter: 80 mm Max cutting height: 120 mm Table width with gap: 700 mm Table length: 1790 mm *From above: Ratcheting pawls Pressure roller, smooth Ratcheting pawls Pressure roller, smooth Shaft with sawblades Smooth pressure rollers: 2 pcs From below: Guide Smooth sliding roller Ratcheting pawls Track Central lubrication Feed motor: 1.1 kW Ksdpfx Aeyaq Hgsdwjwt Main motor: 30 kW Electric body lifting Manual saw shaft lifting Extraction nozzle diameter: 160 mm Overall dimensions (L/W/H): 2250x1700x2000 mm Weight approx.: 3000 kg – German-made – Electric lifting of body and saw shaft – Smooth feed speed adjustment – Used multi-blade saw, in very good condition Net price: PLN 68,900 Net price: EUR 16,400 at the rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: like new (used), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, machine/vehicle number: ABT 1/2000-8, type of input current: AC, overall weight: 4,200 kg, input voltage: 400 V, input frequency: 50 Hz, The 2 tons/hour Belt Dryer System (model ABT 1/2000-8) is an industrial drying unit manufactured by ASOS PROSES MAKİNA SAN. VE TİC. A.Ş. (Turkey). It is designed for the continuous drying of granular or particulate materials such as pet food, cereals, grains, feed, agricultural products, and similar bulk goods. The system operates indoors on a single production line, 24 hours per day, under ambient temperatures of 5–35 °C and relative humidity between 60–80 %, at sea level. The machine is engineered to reduce moisture content from 28 % to 12 %, with a feed rate of 2,000 kg/h, evaporating 364 kg of water per hour, and delivering a dry output of 1,636 kg/h. It requires 364,000 kcal/h of thermal energy, typically provided by combustible gas, with a drying temperature range of 50–60 °C. Total electrical consumption is 37 kW, with 46.2 kW installed power, powered at 400 V / 3-phase / 50 Hz, and an estimated nominal current of ≈ 78.5 A. Noise levels are below 85 dB(A) at 1 m. The required installation space is 4 m (width) × 10 m (length) × 4 m (height). The Belt Dryer unit has a drying surface of 16 m², a belt width of 2,000 mm, and a length of 8,000 mm. It uses a single-pass polyester belt. Both upper and lower casings are made of galvanized steel with rock wool insulation on heated surfaces. Inspection hatches and instrument sockets are provided on both sides for easy access and monitoring. Kwodpjyb Rpdefx Adwst The system includes a spreader unit for uniform material distribution, a burner chamber (400,000 kcal/h, carbon steel), and a set of circulation and exhaust fans (galvanized steel, direct drive, VSD). Multiple motors (totaling 46.2 kW) drive feeding, mixing, drying, ventilation, and heat exchange equipment. Control is managed through a floor-standing MCC and PLC cabinet (IP55, 600×4000×2200 mm), equipped with a Siemens S7-1500 PLC, 17" SCADA touchscreen (TP1900), Profinet communication, and ABB/Danfoss VSDs. All signal and power cables and galvanized trays are included, along with galvanized structural supports. The system is suitable for industrial-scale drying operations in the food, feed, agricultural, and processing industries, offering stable performance, low noise, and automated control. It is built for durability with galvanized steel construction, easy maintenance access, and optional on-site erection and commissioning by ASOS engineers. Delivery time is typically 10–12 months from advance payment, and the equipment is guaranteed for one year against material and manufacturing defects.

Condition: excellent (used), Levigaltecnica Mikro SR/RTC/1100 Wide Belt Sander Working width: 1100 mm Working height: 3-160 mm Number of sanding units: 2 Unit with rubber roller Combi unit with sanding pad Optical oscillation Electric height adjustment Abrasive belt dimensions: 2150×1170 mm Kodox Tqdtjpfx Adwjwt Two feed speeds

Condition: excellent (used), SCM Sandya Uno RCS Wide Belt Sander Working width: 900 mm Kwodpfx Ajx Tpk Ssdwjt Working height: 3–160 mm Number of sanding units: 2 Unit with steel roller Combi unit with pad Abrasive belt dimensions: 930×1525 mm Two feed speeds: 4.5–9 m/min Weight approx.: 1050 kg

Condition: good (used), Year of construction: 2011, Saws sliding table saw WALTER FWR 500/2 - Polish production - DTR, CE Kwjdpfx Ash Dwmljdwet - year of production 2011 TECHNICAL PARAMETERS: - the minimum length of the material after formatting is 800 mm - the maximum length of the material after formatting 1600 mm - maximum material width 480 mm - maximum material thickness 145 mm - disc diameter 500 mm - feed smoothly adjustable 0-20 m / min - main engine power 2 x 5.2 kW - 1.5 kW feed motor power Machine dimensions: 340x230x180 weight 2500 kg

Condition: used, cutting height (max.): 105 mm, cutting width (max.): 1,550 mm, cutting length (max.): 2,500 mm, total length: 430 mm, saw blade diameter: 350 mm, cutting height with scoring (max.): 105 mm, – Polish production – DTR technical documentation – Electric saw blade spacing adjustment – Pneumatic clamps – With scorer unit TECHNICAL PARAMETERS: – Max. blade diameter: 350 mm – Spindle diameter: 30 mm – Height-adjustable blade (up/down) – Blade guard – Max. cutting height: 105 mm – Min. cutting width: 250 mm – Max. cutting width: 1550 mm – Max. cutting length: 2500 mm – Electric saw blade spacing adjustment – With scorer unit – Max. scorer blade diameter: 125 mm – Scorer spindle diameter: 20 mm – Main motor power: 2 x 4 kW – Scorer motor power: 2 x 0.75 kW – Carriage feed motor power: 0.37 kW – Pneumatic clamps: 2 pcs – Extraction port diameter: 2 x 120 mm – Machine transport dimensions (L/W/H): 430 / 140 / 110 cm Kwjdpfx Asyaazyodwjt – Weight: ~1000 kg

Condition: new, Year of construction: 2024, neu 2024 6254 prompt, Zwischenverkauf v Italien 15040 € 288.77 € 1 Doppelsäulenführung 3270x27x0,9 mm 40/80 m/min 300 mm 300 mm 350x260 mm rund 210 mm, quadrat 210 rund 110 mm, quadrat 110 830 mm 1.5 kW 1500 mm 1600 mm 1900 mm 590 kg hydraulicvice INCL. ADJUSTABLE CLAMPING PRESSURE Kodpfx Aowiqndodwswt saw beam moves up and down by hydraulic cylinder fast descent automatic fast up/down conrolled by feeler pin adjustable pressure according to section and type of material double safety buton for cycle start 2 speeds coolant equipment _CUTTING CYCLE_ Vice locking; Quick bow pull-down hydraulically operated; Blade rotation and cooling liquid start-up; Working pull-down; end of the cutting cycle; Stop of blade rotation and supply of cooling liquid; Quick bow lift-up; Stop of bow upwards movement; vice unlocking if selected. Manufacturer warranty until 31.12.2026 OPTIONS: Roller tables and band saw blades on request

Condition: used, machine/vehicle number: 008001, Max. panel width: 4300 mm Kjdpfx Ajwuz Tbsdwjwt Max. panel length: 4300 mm Main saw blade projection: 125 mm No of Grippers: 8

Condition: excellent (used), Catalogue number 7871 TECHNICAL DATA - Maximum workpiece width: 1300mm - Maximum workpiece height: 170mm 2 sanding units: 1) Grooved rubber roller for calibration 2) Grooved rubber roller + segmented shoe + metal roller – From above: 2 pressure feed rubber rollers First unit: - Pressure rubber roller Second unit: - Pressure rubber roller - Cleaning brush - Pressure rubber roller – From below: Kjdpfx Adsx U Urqowjwt - 3 slip rubber rollers - Conveyor belt - 3 slip rubber rollers - Pneumatic belt oscillation with photoelectric sensors - Electric table elevation - Pneumatic brake - Stepless feed speed adjustment via gear motor - Vacuum pump - Main motor: 15kW - Feed motor: 1.5kW - Pump motor: 4.6kW - Working pressure: 6-8bar - Extraction port diameters: 2x150mm, 2x80mm, 4x70mm, 120mm - Overall dimensions (L/W/H): 1700x2250x2400mm + pallet - Transport dimensions (L/W/H): 1700x2250x2140mm + pallet - Weight: approx. 2000kg ADVANTAGES – Made in Italy – 2 sanding units – Segmented shoe – Vacuum pump – Not repainted – Used sander, in very good condition Net price: 39,900 PLN Net price: 9,500 EUR (depending on the exchange rate of 4.2 EUR) (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number: 7866 Kwjdsx U Tymspfx Adwet TECHNICAL DATA - Max. blade diameter: 300mm - Blade bore diameter: 30mm - Blade guard - Cutting height with installed blade: 250mm, 60mm - Max. cutting width: 600mm - Ability to cut at an angle in the vertical plane – arm or blade movement - Arm rotation left/right - Motor: 3kW - Table size: 1130x1010mm - Extraction port diameter: 50mm - Dimensions (LxWxH): 1150x1190x1510mm - Weight: 220kg ADVANTAGES – Italian-made – Not repainted – DTR technical documentation – Very good condition – Used saw Net price: 6,500 PLN Net price: 1,550 EUR (based on an exchange rate of 4.2 PLN/EUR) (Prices may change subject to exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7865 TECHNICAL DATA - max blade diameter: 315mm - spindle diameter: 30mm - blade guard included - max cutting height: 40mm - min saw spacing: 180mm - max saw spacing (edge-to-edge): 2400mm - manual saw spacing adjustment - main motor power: 2x3kW - feed motor power: 0.74kW - feed with inverter + forward/backward - overall dimensions (LxWxH): 3300x1000x1600mm - weight: 250kg ADVANTAGES Ksdsx U Tvhepfx Adwswt – Made in Poland – Manual saw spacing adjustment – Very good condition – Unpainted – Double-saw, used Net price: 7,900 PLN Net price: 1,880 EUR based on exchange rate 4.2 EUR (Prices may change with major rate fluctuations)

Condition: excellent (used), Catalogue number 7864 TECHNICAL DATA - Track width: 300 mm - Shaft working width: 310 mm - Max. disc diameter (currently fitted 300 mm): 350 mm - Bore diameter: 70 mm - Maximum cutting height: 120 mm - Table width with extension: 750 mm - Table length: 1540 mm - From above: - Kickback pawls Kjdpfx Adex U Tqxswewt - Metal sliding roller - Kickback pawls - Metal sliding roller - Shaft with saw blades - 2 smooth metal sliding rollers - From below: - Guide rail - Kickback pawls - Track - Central track lubrication - Stepless feed speed adjustment - Feed motor 1.1 kW - Main motor 26 kW - Extraction nozzle diameter 200 mm - Overall dimensions (L/W/H): 1800x1350x1450 mm - Weight approx. 1700 kg ADVANTAGES – Italian made – Very good condition – Used multi-blade saw Net price: 37,900 PLN Net price: 9,000 EUR depending on the rate of 4.2 EUR (Prices may change due to market fluctuations)

Condition: excellent (used), Catalogue number: 7863 TECHNICAL DATA - Track width: 300mm - Working shaft width: 300mm - Max. disc diameter: 350mm - Disc bore diameter: 70mm - Max. cutting height: 120mm - Table width with extension: 750mm - Table length: 1530mm - Top: - Kickback barriers (protection against material reversing) - Metal sliding roller - Kickback barriers - Metal sliding roller - Shaft with saw blades - 2 smooth metal sliding rollers - Bottom: - Guide bar - Kickback barriers - Track - Laser - Centralised track lubrication - Infinitely variable feed speed via inverter - Feed motor: 1.5kW - Main motor: 26kW - Brake - Extraction port diameter: 200mm - Overall dimensions (L/W/H): 1700x1400x1600mm - Weight approx.: 1700kg ADVANTAGES - Italian manufacture - Equipped with laser - Very good condition - Used multi-blade saw Kwedpfx Adex U Tp Iowst Net price: 39,900 PLN Net price: 9,500 EUR (based on an exchange rate of 4.2 EUR) (Prices may vary subject to higher exchange rate fluctuations)