Used Bevelling for sale (496)

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Ndodoxnlgcjpfx Aansf Storage location: Garbsen

Year of construction: 1996, condition: used, Max. saw blade diameter: 280 mm Nodpfjx Ivqzsx Aanedf Pneumatic material feed via two-hand operation minimum quantity spraying Bevel cuts possible on both sides with detent points Roller conveyor and length stops on request

Condition: good (used), Code: 0465 Brand: IDM - SCM GROUP Model: IDIMATIC 49-20 Automatic edge bander for the application of edges in wood, pvc, veneer, melamine, abs for furniture, furnishings, kitchens, bathrooms, doors, panels and various Njdpfx Aevhc E Heansdf Technical data: Min/max gluing height mm 10/50 Min/max edge thickness mm 0,4/20 Min panel width mm 60 Min panel length mm 140 Adjustable feed speed m/min 12/18 Electric press lift Telescopic support for large panels Soundproof cabin Composition: Anti-adhesion unit: spreads anti-adhesive liquid on the upper and lower surfaces of the panel Gluing unit with pre-melting unit Pressure rollers End trimmer unit for front and rear vertical cutting of excess edging - N° 2 motors 0,5 Kw at 12000 rpm - Tool diameter mm 110 Top/bottom trimmer unit with superimposed motors for trimming the upper and lower sides of the excess edge band - N° 2 motors 0,5 Kw at 12000 rpm Top/bottom trimmer and beveller unit for final upper and lower trimming of excess edge band - N° 2 motors 0,5 Kw at 12000 rpm Manual turret device - automatic positioning of the tool post and front copiers according to the different edge band thickness Routing unit makes through holes and non-through holes in the edged side and on the upper and lower parts of the panel and is time controlled Cleaning unit for brushing and polishing of the edge bands applied - N° 2 motors 0,18 Kw at 1400 rpm which can be inclined vertically between 0° and 30° Compressed air 7-8 bar Overall dimensions mm 5600 x 1000 x 1500 h Weight kg 2500

Condition: good (used), Heavy-duty universal carpentry circular saw, carpentry universal circular saw, miter saw, crosscut and miter saw, joinery circular saw -Manufacturer: Schneider Carpentry Machines, CNC joinery circular saw with roller conveyor, laterally movable left/right -Type: SLS 28 -Circuit saw: for crosscuts, miter cuts, bevel cuts, rip cuts, -Circuit saw: for cutting valley rafters, eaves boards, chamfers, and wedge boards Njdpfx Ajx Ityyeanedf -Saw unit: swivels 30°, rotates 180° -Drive motor: 11 kW -Saw blade: Ø 750 mm -Cutting height: max. 280 mm at 90° -Cutting height: max. 140 mm at 30° -Cutting width: max. 550 mm -Roller conveyors: 5020/750/H970 mm / 2000/750/H970 mm 320 kg -Saw dimensions: 2400/2130/H1600 mm 984 kg -Total weight: 1304 kg

Condition: used, Year of construction: 2005, Technical details: weight of the machine ca.: 8 t dimensions of the machine ca.: 2,95 x 1,6 x 2,36 m chucking diameter: 250 mm Nsdpfoizlh Hox Aansdf swing diameter: 265 mm x-travel: 170 mm z-travel: 200 mm spindle turning speed range: 1.500 U/min spindle bearing diameter: 100 mm Pick-up machine *

Condition: used, Frame clamping element (WS15) HOLZ-HER - used - ATTENTION: SET price for 4 pieces! Clamping cover type O, Clamping to console via toggle switch, Opening/closing via toggle switch ----- Technical data ----- Clamping range: 40 - 115 mm Ndjdevtrk Aopfx Aanjf

Year of construction: 2002, condition: used, max. wheel diameter 275 mm Ndjdpfx Asgtvbpjansf gear width 55 mm max. module 6 min. module 1,5 control Sinumerik 840C tooth width 5,5 mm spiral angle 0/60 ° max. number of teeth 120 min. number of teeth 5 transmission ratio max. 1:10 transmission ratio min. 1:1 spindle speeds max. 110 mm blade head turning speeds 20-110 1/min total power requirement 100 kW weight of the machine ca. 16700 kg dimensions of the machine ca. 5200x2300x2400 mm

Condition: excellent (used), Catalogue number 7450 TECHNICAL DATA - Max diameter of workpieces: 140mm - Min diameter of workpieces: 30mm - Installed bushing diameter: 70mm - 2-knife head - Arbitrary length of workpieces - Motor: 4kW - Dimensions (L/W/H): 700x500x1100mm - Weight: 100kg Nodpfsuhfa Ujx Aanodf ADVANTAGES – Incl. 70mm diameter bushing – Used bevelling machine – Very good condition – Used machine Net price: 5,900 PLN Net price: 1,400 EUR (depending on exchange rate 4.2 EUR) (Prices may change with significant exchange rate fluctuations)

Condition: new, empty load weight: 2,850 kg, maximum load weight: 7,650 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 5,280 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245/70 R 17,5, color: other, gearing type: other, front tire size: 245/70 R 17,5, rear tire size: 245/70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Each ramp approx. 2,700 mm long x 560 mm wide, ramps with grating, loading height: 840 mm, 10 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel side walls, foldable and removable, wood planks 50 mm, loading surface at rear beveled, inside loading width 2,480 mm, rear stanchion removable, front open for through-loading, Also available with a loading length of 6,300 mm!!, Rental price from 500 ¤, -- Printing errors, mistakes, and changes reserved, sample pictures --, More data at: !, More details: ! Ndodpfex Hprcjx Aanef

Condition: good (used), Weld edge former, weld edge former, weld preparation, weld edge forming machine, edge milling machine -Bevel length: max. 10 mm -Strength: 40 kg/mm² Ndjdpfx Aeb A N Rgoanjf -220 V 1800 W -470 strokes/min -Weight: 15 kg

Condition: used, Year of construction: 2000, Technical details: max. wheel diameter: 130 mm max. module: 3 total power requirement: 15 kW Nsdpowv Uhbofx Aanodf weight of the machine ca.: 6 t dimensions of the machine ca.: 2,3 x 2,5 x 2,17 m A well-preserved CNC hobbing machine Vertical for shafts and wheels With tailstock Also suitable for hard milling (good for steering pinion) Rapid traverse radial, axial: 10.000 mm/min Rapid traverse tangential: 7.500 mm/min Max. wheel diameter 130 mm Max. module 3 mm Tangential slide travel 200 mm Radial slide travel 10 / 100 mm Axial slide travel 300 / 200 mm Milling head speed 250-3500 U/min Milling head -swivable +/- 40 ° Tool diameter 80 mm Tool length - max. 240 mm Table turning speeds 5 - 1000 U/min Milling spindle drive 15 kW Feed range mm/min Table diameter 132 mm Control Sinumerik 840 C Connected load 40 kVA Motor output 15 kW Weight : 6 T Dimensions 2300 mm * 2500 mm * 2170mm Accessories : Hydraulical workpiece clamping Automatic loading system Magnetic chip conveyor *

Condition: used, Ceiling Laser LAP LASER CAD-PRO - used - Retrofit kit suitable for: e.g. HOLZ-HER ProMaster, Dynestic, Epicon, incl. LAP Ethernet gateway, 4 swivelling targets with bracket ----- Technical Specifications ----- Projection color: green, Supply voltage: 24 V DC, LAP connection cable: 25 m Njdpfx Aexltvysanedf

Condition: used, Year of construction: 2007, max. wheel diameter 500 mm Hypoid adjustment ±70 mm Ndodjukitxspfx Aansf axial cross angle 90 ° Distance Y- 150 - 350 mm Distance Z-axis 120 - 340 mm turning speed range - stepless 0 - 5000 U/min max. torque on the spindle 57 Nm Cone 99,2 mm Pull-in force Tool clamping 23000 N Braking torque max. 93 Nm total connected load 20 kVA total power requirement 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 2,35 x 2,24 x 2,5 m

Condition: used, As good as new T – angular gear or bevel gear Tandler type O1-III made of steel with a gear ratio of 2:1. manufacturer number: 151227 Ndsdpfx Asw Uhhksansf width: 222 mm height: 190 mm Depth: 110 mm Relationship: 2:1 Waves: 22 x 6

Condition: new, empty load weight: 2,980 kg, maximum load weight: 7,520 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245 / 70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, each ramp approx. 2,700 mm long x 560 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel drop sides, foldable and removable, wooden planks 50 mm, loading area rear beveled, loading area width inside 2.480 mm, rear stanchion removable, front for through-loading, , Also available in 5,300 mm loading area length! , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Ndodpfxjx Hpq Ss Aanof

Condition: good (used), Clamping bars, clamping devices, clamping jaws, deep clamping jaws, clamping supports, clamping tools, step clamps, low clamps, clamping irons, fork clamping irons -Tensioning bracket: Fork clamping iron, beveled -Type: DIN 6315 B 40 x 400 -Slot width: 40 mm -Dimensions: 405/100/H60 mm -Weight: 10.9 kg Ndodpskkzyfofx Aansf

Condition: good (used), Year of construction: 1987, gear diameter 800 mm, module 16 Ndsdex Ifkdspfx Aanof

Condition: ready for operation (used), Year of construction: 2005, Control Unit Additional Equipment Automatic insertion table Agregado KFA Return NC insertion system Inclined roller table as inlet section Additional stop ruler, adjustable via NC axis Agregado double 08.376 Radiator 300 lg, 2x1.5 kW Multiple profile/bevel unit Contour milling unit KFA 30 Multiple profile scraper unit Ndedsx D I Dvepfx Aansf This edgebander was manufactured in 2005. It is a single-sided combination machine ideal for formatting, edge gluing, and finishing panel-shaped workpieces made of wood or wood-based materials. Features include an automatic insertion table, NC insertion system, and a 12-compartment edge magazine for roll material up to 3 mm thick. It also boasts a variable feed speed of 5-25 m/min and a PC control ICOS open system. For more information about this edgebander, please reach out to us. Application Types Edge Banding

Condition: used, Year of construction: 1997, max. wheel diameter 275 mm gear width 150 mm max. module 6 min. module 1.5 max. workpiece diameter 275 mm tooth width max. 5.5 mm spiral angle 0 - 60 ° number of teeth 5 - 120 transmission ratio min. 1:1 transmission ratio max. 1:10 milling drive motor 20 kW workpiece drive 14.5 kW total power requirement 62 kVA weight of the machine ca. 12 t dimensions of the machine ca. 4,7 x 4,387 x 2,45 m Ndsdpfx Ajd Il R Aoanjf Tool spindle (D-axis) - workpiece spindle speed (infinitely) 60 to 350 r.p.m. Tool positioning axis (E-axis) - swivel range 0 to 360° - swivel speed max. 19.5°/s Workpiece spindle (B-axis) - mounting diameter outer cone (1: 4) 140 mm - standard internal cone (1:20) 99.218 mm - workpiece spindle speed max. 300 r.p.m. - workpiece spindle passage 90 mm Workpiece positioning axis (Y-axis) - travel 870 mm - speed max. 4.5 m/min Roller rotation axis (A-axis) - swivel range 315° - swivel speed max. 40°/s Axis intersection (Z-axis) - travel range max. +/- 50 mm - speed max. 0.657 m/min Workpiece swivel axis (C-axis) - swivel range -8.5 to 98° - swivel speed max. 21.5 °/s Milling depth axis (X-axis) - travel from -25 to 640 mm - max. speed 6 m/min Machinen distance (V-axis) - travel 150 mm - speed max. 1.6 m/min - 13 milling cutters included -

Condition: new, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 6,700 mm, loading space width: 2,480 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, 400 mm side walls, steel side walls HOT-DIP GALVANIZED, with central stake on the side, plug-in, chassis: hot-dip galvanized, wooden floor, 14 lashing eyes in the outer frame, bevelled at the rear, 2 x ramps each 3,000 mm long x 725 mm wide, ramps with spring lifting mechanism, ramps with gratings also available in wood!, Loading height: 880 mm, , Also available in loading area length 7.20 m, available for immediate delivery., , Rental price from 580 euros, , --  Subject to printing errors, mistakes and changes, Sample images --, More data at: !, More details: ! Nsdpfxex Hpr Ae Aanedf

Year of construction: 2004, condition: used, z-travel 200 mm clamping diameter of cutter heads max. 550 mm max. permissible cutter head weight 150 kg mounting plaute diameter for cutter heads 360 mm taper for cutter heads, nominal diameter 500 mm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m Cutter Head Set-Up- and -Measuring Machine In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in dry milling, high gear cutting quality and a long service life can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the Ndsdpfxevq Sd Ro Aanjf cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: new, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,550 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Chassis: hot-dip galvanized, 70 mm thick wooden floor, 20 lashing eyes, loading ramps (approx. 3,100 x 750 mm), climbing bar on the outside of the ramps and rear bevel, laterally adjustable loading ramps, ramps with spring lift system, 8 stake pockets, loading height: 900 mm, 2 toolboxes, contour marking according to regulations, incl. axle load indicators, 450 mm drop sides. -- Subject to misprints, errors, and changes. Sample pictures. -- More data at: !, More details: ! Njdpex Hhpgsfx Aansdf

Condition: used, Year of construction: 2006, max. wheel diameter 2 - 45 mm gear width 250 mm max. module 1,5 mm min. module 0,5 weight of the machine ca. 2,2 t control Fanuc 18i-MB max. workpiece length 250 mm weight of the machine ca. 2200 kg Milling cycles: - straight, helical, crowned gearing - radial, radial-axial, climb and conventional milling, roughing, finishing - worm wheels, straight-toothed bevel wheels, face gearing (option: only in partial process) Technical Details: - maximum workpiece length 250 mm - maximum toothing length 150 mm - maximum module in steel 1 mm (gear hobbing) - maximum module in steel 1.5 mm (worm milling) - maximum module in steel 0.5 mm (bevel gear hobbing) - milling cutter diameter 16-32 mm (gear hobbing) - milling cutter diameter 40-63 mm (worm milling) - maximum setting angle of milling head ±45 deg. (Rolling) - maximum setting angle of milling head ±30 deg. (worm milling) - Shift travel 34 mm (CNC axis) - Collet / retraction mandrel W20 - maximum speed of the workpiece spindle 770 rpm. - milling spindle drive 0.55 kW - Maximum speed of the milling spindle 8000 rpm. CNC axis drives: -X-axis = plunge travel 80 mm -Z-axis = longitudinal feed travel 190 mm -C-axis = workpiece axis 360 deg. -Rapid traverse X/Z 6 m/min. -Hydraulic unit 0.37 kW -Dimensions 2100 x 1440 x 1700 (LxWxH) Options: -CNC shift axis 34 mm -Adjustment angle with CNC axis Njdpfx Asvq Sfzjanodf -Deburring device Accessories: - spiral conveyor

Condition: new, empty load weight: 3,120 kg, maximum load weight: 8,780 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245 / 70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, each ramp approx. 2700 mm long x 900 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel side walls, foldable and removable, wooden planks 50 mm, loading area bevelled at the rear, inside loading area width 2480 mm, rear stanchion removable, front for through-loading, , Also available with 5300 mm loading area length!!, , Rental price from 500 ¤, , --  Subject to printing errors, mistakes and changes, Sample images --, More data at: !, More details: ! Ndjdpfoxf Tzvox Aanof

Condition: new, empty load weight: 2,980 kg, maximum load weight: 7,520 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245 / 70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, each ramp approx. 2,700 mm long x 560 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel drop sides, foldable and removable, wooden planks 50 mm, loading area rear beveled, loading area width inside 2.480 mm, rear stanchion removable, front for through-loading, , Also available in 5,300 mm loading area length! , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Njdpfxex D Uu Ue Aanedf