Used Carpentry for sale (166)

Condition: good (used), UDKP100 Multi-blade Circular Saw - 37 kW motor power - Max. cutting height: 100 mm - Max. cutting width: 300 mm - Max. working width: 450 mm - Circular saw blade diameter: 250/300–350 mm Cedpfexbrutsx Afpepu - Working speed: 40 m/min - Chain conveyor feed - Manual blade height adjustment - Extra thick steel frame, shaft made from specially alloyed, hardened, and ground steel - Manual blade height adjustment depending on selected blade diameter - Large set of spacer rings included Currently still located in Hungary

Condition: good (used), Year of construction: 2003, The painting unit with heat exchanger and blowing for drying was used in the production of stairs and carpentry elements Cpodpfeuyy A Dex Afpou Paint wall also with extraction in the floor with a total length of about 7 mb equipped with three extraction fans

Condition: good (used), functionality: fully functional, cutting width (max.): 1,200 mm, cutting height (max.): 70 mm, saw blade diameter: 125 mm, total height: 1,300 mm, total length: 6,000 mm, cutting height with scoring (max.): 2 mm, extraction nozzle diameter: 250 mm, type of input current: three-phase, input voltage: 400 V, space requirement width: 3,000 mm, space requirement length: 6,500 mm, input frequency: 50 Hz, main saw diameter: 350 mm, overall weight: 3,500 kg, rotational speed (max.): 3,800 rpm, cutting length (max.): 4,200 mm, feed length X-axis: 4,500 mm, feed rate X-axis: 7 m/min, collet bore: 75 mm, saw blade speed: 3,800 rpm, saw drive: 7,500 W, year of last overhaul: 2024, Saw for rip cutting but also for sawing. It is very well suited for longitudinal edging of lumber flanks and then cutting to width before planing. With this machine, sawing lumber is incomparably lighter than on classic saws even with a carriage. It can work in automatic and semi-automatic cycle . It has 4 ranges of aggregate position as far as the length of the element is concerned, which means that the aggregate does not have to return all the way to the end of the machine, which shortens the time of cutting the raw material. It significantly facilitates and accelerates the manipulation of with the preparation of lumber for planing, and the even cut makes the alignment saves time on planing the element. Working on it is relatively safe because during the cutting itself, the operator does not have direct contact with the material being cut, and the workpiece is pressed from above with a pressure beam using compressed air. Activation of the pressure beam and the feed of the cutting unit, is carried out using a foot pedal .It is also suitable for cutting boards with a jigsaw .Also equipped with components for various applications. It is ideal for small and medium-sized carpentry shops that process thick massive lumber. The machine is massive and durable. Cpsdouyvnijpfx Afpju

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 2 h, functionality: fully functional, type of input current: three-phase, warranty duration: 12 months, product height (max.): 100 mm, space requirement height: 1,750 mm, space requirement length: 1,200 mm, input frequency: 50 Hz, workpiece weight (max.): 300 kg, Equipment: type plate available, Alpha Brush KS-WBM Sanding Machine, Texture Brushing Machine This machine gives surfaces, such as profile boards for facades or wall cladding, a noticeably more sophisticated and rustic look! With up to 400 mm working width and customizable configuration for both softwoods and hardwoods, this machine is a versatile tool for carpentry workshops, planing mills, or joineries. Cjdpew Avrhefx Afpspu We offer not only the texture brushing machine itself, but also the appropriate extraction unit and a variety of brush heads to equip the machine, allowing you to achieve your desired effect on wooden surfaces. In addition to this sanding automaton, we also supply coating machines that allow you to stain or finish boards and panels in one step. Do you have questions? We are happy to advise you individually on your requirements.

Condition: new, With the cost-effective single-shaft shredders of the ZWS series, a wide range of shredding tasks can be realized, e.g. as a preliminary stage for subsequent briquetting, for the production of wood chips for firing or return to the particleboard industry. Depending on throughput and material, the machines can still be individually adapted to the task. Typical feed materials for shredding are: Large panel and board sections Wooden pallets Waste from carpentry workshops Packaging wood Cjdpfjghgdgex Afpepu Construction and demolition wood Veneers, MDF and chipboard

Condition: as good as new (ex-display), functionality: fully functional, Cobra is an exclusive high pressure double diaphragm pump suitable for Airless and AirCoat applications up to 250 bar. Cobra is the first high pressure pneumatic pump without packing. The lack of contact between the material and the external atmosphere (the pump is completely sealed), the absence of friction in the fluid section and the minimum shear make it perfect for any kind of material including the most critical ones such as reactive paints (UV paints, isocyanates, acrylics) or highly abrasive materials. The pump works with extremely low pulsation and creates a uniform paint flow, achieving a perfect spray pattern and superb surface quality. With its minimized internal volumes, the pump is designed to greatly reduce solvent consumption and material waste during flushing and color-change operations. Cobra 40-10 is the ideal solution for working with small quantities and frequent color changes – recommended for single-gun up to three-gun applications in the wood and furniture industry, small carpentry shops and joineries, and the general metal industry. Cobra® 40-10 is also ideal for feeding base or hardener for 2K mixing units (FlexControl and FlexControl Plus). Wagner membranska pumpa OMJER PRITISKA 40 :1 MAKS. TLAK MATERIJALA NA ULAZU PUMPE 20 bara DOVOD MATERIJALA M-M 36x2 IZLAZ MATERIJALA M-G 3/8’’ TEMPERATURA MATERIJALA 10 - 80 °C ULAZNI TLAK ZRAKA 2,5 - 6,0 bara PRIKLJUČAK ZA ULAZ ZRAKA F-G ½’’ Cedpfx Ajqzx Nkofpjpu RADNI TLAK 250 bara MAKS. BRZO UDARA 200 DS/min VOLUMETRIJSKI PROTOK PO DVOSTRUKOM UDARU 10 cm3/DS TEMPERATURA OKOLINE 10 - 60 °C TEŽINA 19,0 kg MAKS. RAZINA ZVUKA 74 dB(A) MATERIJAL PH 3,5 - 9,0 pH PUMPA JE U KOMPLETU SA CRIJEVOM I PIŠTOLJEM GM4700AC

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 1,400 mm, total height: 1,300 mm, total length: 2,950 mm, planing width: 500 mm, total length of planing tables: 2,950 mm, overall weight: 1,460 kg, input voltage: 400 V, warranty duration: 12 months, input frequency: 50 Hz, input current: 11 A, workpiece width (max.): 500 mm, Equipment: CE marking, MADORA Sp. z o.o. is a Polish manufacturer specializing in industrial machinery for woodworking and metal processing. Since 2013, we have been supplying reliable, high-quality machines tailored for both small workshops and large-scale production facilities. All our machines are designed and manufactured in Poland, ensuring European quality, durability, and performance. Whether you’re aiming to expand your woodworking capabilities or upgrade your workshop, our solutions are engineered to meet professional standards while being user-friendly and cost-effective. Codewzwvfopfx Afpepu The D500 Planing Machine is designed for the initial preparation of wooden elements by precisely leveling the surface. The D500 planer was developed with the needs of the most demanding customers in mind. Despite its substantial size, the machine features a stable frame and state-of-the-art design—hallmarks of MADORA products. One of the key features of the D500 is its table length—2,950 mm—which enables precise machining of even very long workpieces. The MADORA D500 is an excellent choice for both small carpentry shops and large-scale production plants. Thanks to the incorporation of a gearbox with an adjustment knob, controlling the thickness of the planed layer is significantly easier and smoother. An adjustable planer shaft guard ensures maximum user safety while maintaining operator comfort. With the output table’s easy adjustment system, the operator can effortlessly position the table to create both concave and convex surfaces.

Condition: excellent (used), Year of construction: 1989, RANDEK SP700 cut saw manufacture Randek Sweden Year 1989 SN 1989-02-08 in good condition, cleaned and checked Csdpfx Afoivaryopopu Randek’s SP700 series provides reliable cut saws that are a major asset to roof truss and house producers around the world. The SP700 cut saw is effective, easy-to-use and accurate. It has been on the market for a long time and is continuously improved in close contact with our many customers. The blade on this semi-automatic saw supports angled cuts, which mean it can make any cuts you may require. You can also use the large diameter blade (700mm ) to cut several sections of stacked timber simultaneously. • Angled cuts from 0° to 360° • Cut heights up to 250 mm, possible to cut three boards each cutting cycle • PLC programmable saw • Fixation of timber near the cutting area resulting in accurate cutting roller conveyor system with 5 adjustable pneumatic stoppers . Length 6,25m out feeding roller conveyor 4,10m Complete line: 11,5m technical information under subject of correction

Condition: good (used), Year of construction: 1990, RANDEK SP700 cut saw manufacture Randek Sweden Year 1990 in good condition Randek’s SP700 series provides reliable cut saws that are a major asset to roof truss and house producers around the world. The SP700 cut saw is effective, easy-to-use and accurate. It has been on the market for a long time and is continuously improved in close contact with our many customers. The blade on this semi-automatic saw supports angled cuts, which mean it can make any cuts you may require. You can also use the large diameter blade (700mm ) to cut several sections of stacked timber simultaneously. • Angled cuts from 0° to 360° • Cut heights up to 250 mm, possible to cut three boards each cutting cycle • PLC programmable saw • Fixation of timber near the cutting area resulting in accurate cutting Cjdsh Ayyqopfx Afpjpu roller conveyor system with 5 adjusteable pneumatic stoppers . Lenght 6,25m outfeeding roller conveyor 4,10m Complete line: 11,5m technical inforamtion under subjet of correction

Condition: excellent (used), Year of construction: 2000, Schmidler CNC carpentry line - Model: SAB 4 R - Year of production 2000 - DOS-based software, production files in BTL format Csdpfjulvldjx Afpopu - Line length 30 meters - Additionally a spare saw - Video available The line is 100 % FUNCTIONAL

Condition: good (used), Year of construction: 2010, functionality: fully functional, Weinmann Butterfly Turning Table Dimensions per table: 12.0m x 3.20m 1 fixed table with pneumatic clamps and extendable counter-clamps 1 movable table with longitudinal transport rollers incl. cable trays and floor rail Fully functional. Immediately available, partially already dismantled. Cjdpfoxdm H Aex Afpepu

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Production line / table for wall and roof panels/elements. Hardly used since new. Still looks and works like new. 1 pc Randek BS10u with 80-degree tilt and 2 pcs BS05 tables. Pneumatic fixture/clamp and pneumatically lifted rollers make it easy to move the wall. Length: 9m each. Wall size: from 225x900cm to 365x900cm. Purchase price in 2022: 850,000 SEK = approx 80,000 EUR. Price is excluding VAT. Codpfx Afoxq Rrcspjpu

Condition: new, Bernardo Gluing Press HVS 3000 Codpfxsxrnu Dj Afpjpu The HVS 3000 gluing rack stands out for its universal application, as well as its easy and quick operation, making it indispensable for daily use in workshops and carpentries. Technical Specifications Working length: 2800 mm Working height: 1460 mm Cylinder stroke: 65 mm Pressing force: 2500 kg Vertical hole pitch: 50 mm Total length: 3000 mm Total height: 2070 mm Frame depth: 925 mm Weight: approx. 198 kg Features • Suitable for a wide range of applications such as solid wood gluing, door manufacturing, edge banding, etc. • Robust gluing press with solid steel construction • Faster and more efficient bonding compared to screw clamps • Supplied as standard with 4 adjustable pressure beams and 1 pressure bracket • No tilting of pressure cylinders due to double spring-mounted guide Scope of delivery • 4 movable pressure beams, each with a vertical hand hydraulic cylinder and counter support • 1 movable, adjustable pressure bracket

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, BOOSTON - Manufacturer of machinery and equipment for the prefabrication of frame houses. We offer a production line consisting of two tables and a transport bridge. 1. first assembly table - ER-01H/900 with a length of 9m - Table drive - hydraulic cylinders, hydraulic pump - Total width - 360cm (including 300cm plate) - Permissible load - 100kg/1m2 - solid powder coated steel construction - holes for SD-01 pressure cylinders ( 3 pcs in the set) Cpodpfx Asu I Rnmefpou 2. receiving table ER-05H/600 (6m) - on wheels - to be transported with a hook (pulling or pushing with a forklift) - Mobile table that allows further processing of prefabricated elements in another place - Total width 230cm - Working height 70cm - 360-degree rotating wheels 3. transport bridge - MT-01 - load capacity up to 800kg - 360-degree rotating wheels

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, functionality: fully functional, total length: 9,100 mm, total width: 3,600 mm, Our company is a manufacturer of machines and devices for prefabrication plants. We produce fixed assembly tables, rotary tables, butterfly tables and complete production lines We offer a new assembly table measuring 3.6m x 9.0m Cjdpfxsvv Rv Ao Afpspu - Powder coated construction - Table covered with plywood board with impact-resistant coating - holes for mounting SD-01 pressure actuators - removable and adjustable limiting pins - modular construction for self-assembly (one pallet) - low transport costs throughout Europe

Condition: new, Year of construction: 2025, operating hours: 1 h, table length: 9,000 mm, load capacity: 3,500 kg, Butterfly/rotary table with a length of 9m - a set consisting of two wings. BOOSTON - we are a manufacturer of machines and equipment for the prefabrication of wooden technology houses. Cpodpfxep Ecn Uo Afpeu Buy a machine directly from the manufacturer! Quality guarantee, short delivery time. We offer an assembly table - lifted (butterfly table) consisting of two wings with a length of 9.0m (models available from 6m to 12m). - Table drive - hydraulic cylinders, hydraulic pump - First wing with a total width of 360cm - Second wing with a width of 230cm (with the possibility of extension) - permissible load - 3500kg for one wing - solid powder-coated steel construction

Condition: new, Year of construction: 2025, functionality: fully functional, DIRECTLY FROM THE MANUFACTURER – no intermediaries SINGLE-WING ROTARY TABLE with pneumatic drive, 7.5 m long We proudly present our assembly table for prefabrication – a single-wing butterfly table – model ER-01P/750, 7.5 meters in length, specially designed for efficient and precise prefabrication of walls, ceilings, and roofs. CARPENTRY TABLE / JOINER’S TABLE / ASSEMBLY TABLE FOR PREFABRICATION * Pneumatic drive – working pressure 7–9 BAR * Permissible load: 50 kg/m² (e.g., for a 7.5 m table – 1125 kg) * Powder-coated steel construction * 15 mm plywood board * Holes for mounting clamping actuators every 150 mm * Removable locking pins with height adjustment * Modular construction with the possibility of adding additional segments * Option to add transport rollers AVAILABLE IMMEDIATELY – we ship to every country in EUROPE Codpfx Ajl D Nkzofpepu

Condition: new, Year of construction: 2024, The machine is designed for sharpening planer knives mounted in a package. The sharpener is characterized by a rigid and compact structure with a built-in cooling system Automatic grinder for sharpening planer knives ON1500PLC by VIBER-SYSTEM The machine is designed for sharpening planer knives. The device is characterized by a rigid and compact structure with a built-in cooling system. The machine is mainly used for grinding various right angles of cutting tool blades, such as carpenter's planers, rotary knives, paint spatulas, paper knives, shredder knives, etc. It mainly consists of a machine body, a work table, a slide carriage, a grinding head, automatic feeding, electrical components and cooling - a total of 7 parts. All components have a reasonable and compact structure, and the appearance of the machine is aesthetic. Fully automatic sharpening with X and Y axis feed. High Efficiency: The ON1000PLC sharpener is an efficient device that allows for quick and effective sharpening of planer knives, contributing to increased work efficiency in the plant. Large Dimensions: With a larger version of the model with an impressive weight of 520 kg, the machine ensures stability and solidity of operation, which translates into precision and quality of processing. High Speed: Thanks to the ability to generate grinding disc revolutions of up to 1440 rpm, the sharpener guarantees quick and effective sharpening of planer knives without compromising on quality. Magnetic Mounting: Equipped with a stool with magnetic mounting, the machine ensures stability and safety during the sharpening process, eliminating the risk of knife displacement. Universal Application: The ON1000PLC sharpener is used both in small carpentry workshops and in large sawmills dealing with mass processing of wood and wooden materials. Cedpfx Afstvm A Nspspu Model: ON1500PLC Max. working width: 1500 mm Table with magnetic mount: 140x1500 mm Grinding angle: +/- 90° Automatic workflow in the X axis Automatic and manual adjustment of the Z axis Grinding disc speed: 2800 rpm Grinding disc: Ø 150 x 68 x 32 mm Feed speed: 3 – 9 m/min, stepless adjustment using an inverter Motor power: 2.2 kW/400V Feed motor power: 120W Coolant pump power: 90W Cooling device protecting against overheating of knives: YES Adjustable halogen lamp: YES Lubrication pump with central lubrication: YES Dimensions: 2070x950x1450 mm Weight: 850 kg

Condition: used, Electric motor: 7,5 kW Circular saw is in working condition. Cpsdpjgrkcaefx Afpju

Condition: used, The sale is due to insolvency. The entire system was purchased in 2021 and was only in operation for approximately 3 years. Manufacturer: Randek (Sweden) Year of manufacture: 2021 1. Saw Type: SPL 728 X04 Control: Beckhoff, touchscreen Languages: See photos Mitre cuts: 0°–360° Bevel cuts: 90°–28° Max. material thickness: 250 mm Saw blade diameter: 700 mm Power: 7.5 kW 2. Infeed unit with stacking device, right Type: UV130F2X05 Length: 13 m Lifting table: 4,000 kg 3. Outfeed unit with stacking device, left Type: IH106F1X01 Cjdexqpqkjpfx Afpopu Length: 10.60 m Lifting table: 5,500 kg 4. Label printer Brand: ZEBRA Overall system dimensions approx.: Length 24 m x width 3 m

Condition: new, Year of construction: 2024, We offer: Pellet machines from the WALW-Solutions brand in unique quality, with honest work, at an honest price. Honest work: We produce our systems directly in Poland. Only components such as gearboxes and motors are purchased from well-known manufacturers. Everything else is designed and built in-house, which means we can meet every requirement. Honest price: We produce in Poland and stand by it. Other competitors who write "Made in Germany" on their products only assemble them in Germany and usually source components from Lithuania. We let you benefit from the low production costs, which means that our offer price is usually 40% lower than that of our competitors. These machines for producing pellets are completely new on the market in this price/performance segment and unique in Europe! You can only get WALW-Solutions machines exclusively from us! From systems for processing the company's own sawdust from firewood processing or from your carpentry shop, to the professional production of pellets on an industrial scale from wood chips, straw, miscanthus, ... - but also for the production of hay or straw cops, we can make you the right offer! Our systems have a capacity of 150kg / hour up to 5t / hour. And have all the necessary components to implement a fully automated system. For this purpose, we find the right solution for all raw materials or options for integrating automation into existing systems. Cedpolt Ugtjfx Afpspu All machines and controls are equipped with components from Siemens, ABB, Schneider Electric or similar. Please note that if you have a VAT ID, net purchases are also possible! We look forward to your inquiry! If you are interested, please contact me directly on my mobile at:

Condition: new, Year of construction: 2025, TVM Ø 400 - The Versatile and Customizable Saw for Your Carpentry Workshop The TVM 400 is the all-purpose saw that is essential for your workshop. With a solid and high-performance structure, it is designed to provide an excellent solution for cutting small-section woods, quickly eliminating knots and imperfections. Thanks to the option of customizing it with accessories such as roller conveyors and stops, the TVM 400 ensures maximum versatility and productivity (discover more details in the ACCESSORIES section). Key Features: Efficient and Cost-Effective: Ideal for small and medium-sized carpentry workshops, offering excellent value for money. Ease of Use: Perfect for use without the need for highly skilled personnel, saving time and resources. Cpodpfxjv Iqaxe Afpju Reliability: Always ready for use, supporting all operational needs and reducing machine downtime. Cost Optimization: With the TVM 400, you get a durable machine that doesn’t require frequent maintenance interventions. Advantages: Operator safety ensured by a design aimed at reducing risks. Optimized ergonomics to improve productivity during processing stages. Wear compensation of materials without the need for frequent replacements. Simplified maintenance to reduce costs and increase efficiency. Ready for CURSAL accessories, offering full customization according to production needs. Rationalized cost/quality ratio, making the machine a smart investment. Applications: Production of semi-finished wooden furniture components. Manufacturing of window frames and similar applications. Small-batch production of various types, for specific needs. TVM Ø 500 - The Advanced Solution for High-Volume Production The TVM 500 is one of the most in-demand saws on the market for its ability to handle high-volume production with quality and precision. The optimal cutting section allows for the processing of 90% of squared boards and is perfect for industries that require high performance, such as packaging, construction, and the production of sofa frames and laminated panels. This machine offers maximum flexibility and precision in operations, thanks to advanced features such as: Electropneumatic stops, ideal for cutting stacked boards with repetitive measurements. Numerically controlled stops, for precise measurement management, even in complex processes. Discharge of semi-finished products via transfer systems, discharge tables, or roller conveyors, ensuring smooth and fast material handling. Main Advantages: High productivity for large-volume applications. Versatility in sizes and configurations, adaptable to multiple industries. Operational flexibility supported by advanced accessories. The TVM Ø 500 represents a strategic choice for those seeking a saw capable of meeting the most demanding challenges in the industry, while maintaining high standards of quality and efficiency.

Condition: ready for operation (used), Technical characteristics For cutting all types of timber for carpentry and timber frames Cutting capacity 800 to 1000 pieces per 8-hour shift Cutting length (max): 7000 mm Cutting length (min): 460 mm (90°) Wood cross-section (max): 300 mm x 50 mm 5 Blades: 2x ∅ 800 mm (1725 rpm, 10 HP) + 3x ∅ 500 mm (3450 rpm, 5 HP) 2 suction nozzles: ∅ 200 mm Air speed: 28 to 30 m/s per nozzle Supplied with: - Automatic horizontal wood discharge table - Automatic wood stacking scissor table - Under-machine waste conveyor Power and Motors Voltage: 400 V Power: 45 Kw Overall dimensions Lenght: 11500 mm Width: 4000 mm Height: 2600 mm Weight: 8000 Kg Cjdpfetvt Ucox Afpopu

Condition: ready for operation (used), Technical characteristics Used boiler Compte-R Type CFC 1000 Control cabinet Thermostats, aquastats, thermometers and probes Chip feeder Injection fan Cpjdpfx Afjt U Ugxspju Dust collector Fan Connection hopper Thermal power of 990 kW Suitable for the combustion of sawdust and shavings from carpentry and for use in a workshop heating system Power and Motors Pluging: Three-phased Overall dimensions

Condition: ready for operation (used), Technical characteristics Square mortises, chipped, without lubrication Horizontal frontal stroke 90 mm Pneumatic feed Tilting head Pneumatic presser Aluminium table 1200 mm Ideal machine for furniture and carpentry Power and Motors Pluging: Three-phased Overall dimensions Cpodpfx Aet Dgbmofpju