Used Celtic 12 Lathe for sale (25,800)

Condition: used, Year of construction: 2008, machine/vehicle number: ME107330, Weights Empty weight: 2.450 kg Functional Mast: articulated arm Kdsdpfov Rvhtox Adwog Lifting capacity: 210 kg Working height: 1.200 cm Other information Front tyres / undercarriage remaining: 50 Rear tyres remaining : 50 Tyre brand: - Max. horizontal reach: 300 m Transport dimensions (LxWxH): 2.35x1.25x2.4 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2025, machine/vehicle number: 2158028, Weights Empty weight: 7.040 kg Functional Mast: articulated arm Kedpfx Adow A Hfxowedg Lifting capacity: 230 kg Working height: 1.200 cm Other information Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Tyre brand: - Max. horizontal reach: 722 m Transport dimensions (LxWxH): 5.64x1.2x1.99 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2024, operating hours: 69 h, machine/vehicle number: 2152957, Weights Empty weight: 7.040 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 1.200 cm Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: - Max. horizontal reach: 722 m Kjdpjt Afvaofx Adwsdg Transport dimensions (LxWxH): 5.64x1.2x1.99 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2024, operating hours: 103 h, machine/vehicle number: 2152903, Weights Empty weight: 7.040 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 1.200 cm Other information Front tyres / undercarriage remaining: 90 Kedjtx Rqcopfx Adwjdg Rear tyres remaining : 90 Tyre brand: - Max. horizontal reach: 722 m Transport dimensions (LxWxH): 5.64x1.2x1.99 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2024, operating hours: 96 h, machine/vehicle number: 2152900, Weights Empty weight: 7.040 kg Kjdpfx Adstx Rp Sswjdg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 1.200 cm Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: - Max. horizontal reach: 722 m Transport dimensions (LxWxH): 5.64x1.2x1.99 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2024, operating hours: 59 h, machine/vehicle number: 2153586, Weights Kdsdpfjt Untfox Adwsg Empty weight: 7.040 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 1.200 cm Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: - Max. horizontal reach: 722 m Transport dimensions (LxWxH): 5.64x1.2x1.99 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2024, operating hours: 68 h, machine/vehicle number: 2153420, Weights Empty weight: 7.040 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 1.200 cm Kdjdst Untlepfx Adweg Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: - Max. horizontal reach: 722 m Transport dimensions (LxWxH): 5.64x1.2x1.99 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2000, Carrying capacity: 32.120 kg GVW: 6.880 kg Front tyres / undercarriage remaining: 0 Kdedpfotr Hrxex Adweg Rear tyres remaining : 0 Tyre brand: - Front tyre size: 385/65-22.5 Rear tyre size: 385/65-22.5 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2022, operating hours: 182 h, machine/vehicle number: 2112994, Drive: Wheel Empty weight: 7.040 kg Mast: articulated arm Lifting capacity: 230 kg Working height: 1.200 cm Max. horizontal reach: 700 m Transport dimensions (LxWxH): 5.64x1.2x1.99 Please contact PFEIFER GROUP for more information Kjdpfx Astr Hybodwjdg

Condition: new, Year of construction: 2025, functionality: fully functional, Swing dia over bed 500 mm Swing dia over cross slide 270 mm Swing dia in bridge 700 mm Length of bridge 357 mm Center high 250 mm Center distance 1000 mm Width of bed 340 mm Max weigth of wpc. 300 kgs Spindle speed 22 – 2000 rpm Spindle hole D53 mm Spindle power 5,5 kW Weight ca.1950 kgs Dimensions LxWxH = 2550 x 1100 x 1500 mm Accessories and features - 3 axis D.R.O. - Chuck protection - 3 jaws chuck D250 mm - 4 jaws chuck D300 mm - Tool holder protection - Stopper for long. slide - Steady rest - Travelling rest - Center - Reduction adapter for main spindle Kedjwwt I Nopfx Adwsdg - Tailstock - Coolant unit - 4-fold toolholder - Machine lamp - Rapid speed on long, and cross slides - CE marking - Manuals

Condition: used, Hydraulic self-centering steady rest, luenette, lynette SMW AUTOBLOK Hydraulic steady rest with hydrostatic bearings Suitable for GILDEMEISTER / MAX MÜLLER lathe MD 5 Type: SLK 8-70 N Clamping range: 8 to 70 mm Kjdpfsiv Irlex Adwjdg Operating pressure: approx. 60 bar steady rest base: 245 x 240 mm Type of construction: stationary - 3 pieces roller bearing Ø 35 mm - roller width 18 mm - hydraulic self centering dimension L x W x H: 350 x 250 x 550 mm dead weight: 65 kg good condition

Condition: used, Automatic lathe, turning machine with copy attachment UMA Type F1 NK 60 Copy lathe for chuck parts Machine no. 28-0031 Year of manufacture: 1971 Maximum turning diameter: 150 mm Swing diameter over bed: 400 mm Turning length: approx. 200 mm Spindle bore in machine spindle: approx. 42 mm Spindle speeds: 580 / 930 / 1480 / 2380 rpm, 4 steps Main motor power: 5.5 kW Electrical connection: 380 Volt, 50 Hz - Spindle flange for chuck mounting, short taper 55021, size 6, flange outer diameter Ø 180 mm Kjdoib D H Repfx Adwjdg - Spindle speed via 4 gearbox steps - Hydraulic clamping device with expanding mandrel, without spindle bore, clamping diameter Ø 15 mm - Right side with copying slide, copying unit SAUTER Type KMCA 61, with hydraulic feed movement - Left side with cross slide with hydraulic feed movement - Coolant system mounted below the machine bed - Hydraulic unit positioned behind the machine - Operating manual, electrical diagram, hydraulic diagram Space requirement automatic lathe with hydraulic unit (L x W x H): 2900 x 1900 x 1700 mm Space requirement automatic lathe (L x W x H): 2400 x 1900 x 1500 mm Space requirement hydraulic unit (L x W x H): 1400 x 850 x 1700 mm Weight automatic lathe: 2400 kg Weight hydraulic unit: 400 kg Total weight with pallet: 3000 kg In good condition

Condition: used, L + Z Lathe WEWAG Model 250 / 1500 Kdjdpjlzm Eqsfx Adwjg make no. 20953 year of construction approx. 1975 center distance 1500 mm nominal turning diameter over bed Ø 500 mm turning diameter over bed max. Ø 510 mm Center height over bed 255 mm turning diameter over support Ø 300 mm Center height over support 150 mm spindle bore Ø 56 mm Spindle speed 18 - 1800 rpm. 24 steps lathe chuck support short taper DIN 55022 tailstock inner taper MK 5 drive power 4 kW and 6,7 kW pole-changing - 3-jaw lathe chuck BISON, Ø 250 mm - steel holder 4-fold for turning - fixed lynette - control cabinet fixed on the back of the machine weight 2500 kg

Condition: used, CNC cycle controlled lathe HARRISON type Alpha 400 Plus Machine No. P30180/150 Year of construction 1998 center distance 1250 mm turning diameter over bed 400 mm center height 200 mm Swing diameter over cross slide 245 mm Swing diameter in the bend 585 mm bed width 313 mm face travel (X-axis) 250 mm Tailstock spindle diameter 73 mm Tailstock quill stroke 140 mm Tailstock quill mount MK 5 spindle bore 54 mm spindle head size Camlock D1 size 6 Spindle speed 20-2500 rpm. Spindle speed range (stage 1) 15-275 rpm. Kdodsh Hvk Ajpfx Adwjg Spindle speed range (stage 2) 35-795 rpm. Spindle speed range (level 3) 110-2500 rpm. Feed rate X and Z 0.03 - 0.6 mm/rev. Rapid traverse speed X axis max. 2000 mm/min. Rapid traverse speed Z-axis max. 4000 mm/min. Threading function Metric / Inch / Diametral / Module Spindle drive power 7.5 KW Mains connection 400 Volt, 50 Hz, 23,5 kVA - cycle control Harrison Alpha / GE FANUC - language in French (France) - automatic gear range shifting in 3 steps (15-275, 35-795, 110-2500 rpm.) - electronic handwheels with different transmission ratios (1/10/100) - 3-jaw face spiral lathe chuck FORKARDT Ø 250 mm type CSN, 1 set of soft top jaws - quick-change tool holder MULTIFIX size B with 2 inserts - 1 piece of centering point running with the tool - 1 piece quick-action drill chuck RÖHM, 3-16 mm - hinged lathe chuck guard - hinged working area protection doors - chip tray with coolant device under the machine bed - Switch cabinet fixed to the machine - Interface RS 232 Space requirement L x W x H 2600 x 1450 x 1550 mm weight 1950 kg good condition

Condition: used, L + Z Lathe WAFUM Type TUD 40 Machine no. No. 35689 Year of construction 1975 Center width 1500 mm Turning diameter over bed Ø 440 mm Center height above bed 220 mm Center height above support Ø 125 mm Spindle bore Ø 56 mm Spindle speed 18 - 1800 rpm 36 steps Chuck flange short taper DIN 55027 size 6 Inner tailstock taper MK 5 Drive power 4 and 6.7 KW - Spindle speed via 2 motor speeds and 18 gear stages - 3-jaw lathe chuck Ø 315 mm BISON with 2 sets of chuck jaws (lathe and drilling jaws) Kdsdpew Uf Hwjfx Adweg - MULTIFIX size B quick-change steel holder with 2 interchangeable cassettes - Fixed lynette with plain bearing inside Ø 125 mm - Moving lynette with plain bearing inside Ø 100 mm - Guide rail for turning slim cone with automatic longitudinal feed - 1 piece rotating center point - Hinged chuck guard Space requirement L x W x H 3100 x 1200 x 1450 mm weight 3000 kg good condition

Condition: used, L + Z Lathe WEILER Type LZ PRIMUS GS Machine no. No. 2461 Year of construction approx. 1990 Center width 400 mm Turning diameter over bed 250 mm Center height above bed 125 mm Turning diameter over support 140 mm Center height above support 70 mm Spindle bore 24 mm Spindle speed 60 - 3000 rpm 18 steps Feed lengthwise and flat Chuck flange short taper DIN 55022 size 4 Inner tailstock taper MK 2 Drive power 1.1 kW and 1.5 kW pole-changing Mains connection 380 Volt, 50 Hz - 3-axis digital readout FAGOR, type 30i-T-B - Spindle speed via 2 motor speeds and 9 gear stages - 3-jaw lathe chuck RÖHM Ø 125 mm with stepped jaws - MULTIFIX quick-change tool holder with 1 interchangeable cassette - Set of collets Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 / mm - 1 centering tip for collet chuck holder - Emergency stop - Hinged chuck guard - Splash guard - Machine light - electrical diagram - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Space requirement L x W x H 1200 x 900 x 1560 mm Weight 520 kg Kedpfsrtd Uwex Adwedg good condition

Condition: used, grinding length / mm grinding width / mm workpiece height / mm total power requirement / kW weight of the machine ca. / t required space / m Kjdexxb Nbspfx Adwjdg

Condition: new, Machine according to DIN 8605: lathe with increased accuracy. Tip width: 700 mm Peak height: 170 mm Circulating diameter over bed: 340 mm Circulating diameter over flat slide: 190 mm Kdodpfx Adodctnbswog Bed width: 260 mm Laengs schlitten: 600 mm Shifting path cross slide: 220 mm Shifting path upper slide: 110 mm Flat slide: 410 mm Flat slide width: 150 mm Guide load-length bed slide: 380 mm Rotary chisel cross-section: 20x20 mm Center of rotation distance - Upper slide: 34 mm Swing range upper slide (Support): 60/120° Main spindle: Spindle connection DIN 55029 (Camlock): S 5 Spindle bore: 50 mm Inner cone according to DIN 7178: 1:22 Spindle diameter in the front bearing: dia. 70 mm Max chuck diameter: 200 mm Max. washer diameter: 200 mm Spindle speeds: 40-3000 rpm Speed control: Stepless mechanical speed levels: 4 Main drive: Power at 40% ED: 5.3 kW Max rated torque a. d.Main spindle: 640 Nm Feed: 20 (28) Laengsvorschuebe Z: 0.045-0.787 mm/U 20 (28) Plan vorschuebe X: 0.023-0.406 mm/U Thread: 20 (28) metric thread (basic): 0.4 - 7.0 mm 32 inch thread (with option Raed replacement D3Z200): 56 - 4 Gg/inch 28 Module thread (with option Raed replacement D3Z200): 0.2 - 3.5 32 diam. Pitch thread (with option Raed replacement D3Z200): 112 - 8 Tailstock: Pinole diameter: 50 mm Indoor cone of the pinole: MK 3 Pinole stroke: 120 mm Side adjustment: x 13 mm Zulessige Werkstueckweights

Condition: excellent (used), Year of construction: 1996, turning diameter 380 mm Kodpfex U Encex Adwsdg turning length 750 mm control HEIDENHAIN ManualPlus total power requirement 9 kW weight of the machine ca. 2 t dimensions of the machine ca. 2,4 x 1,7 x 1,7 m

Condition: new, Year of construction: 2025, turning diameter over bed 290 mm turning diameter / mm turning length / mm Kdjdpfx Aoxb Eidsdwsg swing diameter over bed slide / mm Number of sanding units / st. sanding width / mm Sanding height max. / mm total power requirement / kW weight of the machine ca. 310 kg required space 1400 x 700 x 1030 mm The following features and characteristics make the G2930 combination lathe unique and competitive in the market: 1. V-shaped guides provide higher stability and are firmly anchored. 2. The gearbox is fixed for maximum stability and offers comprehensive feed and threading functions. 3. Advanced tapered roller bearings support the D1-4 spindle with high precision. 4. Automatic vertical feed enables maximum threading capabilities. 5. The cross slide is equipped with ‘T’-shaped slots. 6. The slideways are effectively controlled by adjustable gibs. 7. Advanced gearbox design with maximum functionality. 8. Maximum working area thanks to the lowered bed section. 9. The spindle with carriage mounting is controlled by a lever arm. 10. Two lead screws are integrated. 11. User-friendly interface for forward/reverse with zero tolerance. 12. Versatile tailstock that can be offset for turning tapers. 13. Equipped with an emergency stop button, load switch, process control, etc. TECHNICAL SPECIFICATIONS - Max. swing over bed: 290 mm - Max. swing over cross slide: 165 mm - Distance between centers: 750 mm - Spindle taper: MT5 - Spindle bore: 38 mm - Max. travel of tailstock: 80 mm - Tailstock taper: MT3 - Large carriage travel: 560 mm - Middle carriage travel: 140 mm - Small carriage travel: 80 mm - Transverse feed: 0.017~0.25 mm/r, 15 steps - Longitudinal feed: 0.07-1.0 mm/r, 15 steps - Metric thread: 0.2-3.5 mm, 18 steps - Inch thread: 8-56 T.P.I, 21 steps - Spindle speed range/steps: 50~1800 RPM, infinitely variable - Motor power: 1.5 kW Other dimensions and weight: - Overall dimensions: 1400 x 700 x 1030 mm - Package size: 1450 x 750 x 970 mm - Net weight: 290 kg - Gross weight: 310 kg

Condition: used, turning diameter over bed / mm Ksdpfxowgi Tme Adwjdg turning diameter over slide rest / mm turning length / mm

Year of construction: 1998, condition: used, x-travel // mm y-travel / mm z-travel // mm total power requirement / kW weight of the machine ca. 950 KG Kdodeig A Erjpfx Adwog

Condition: used, Year of construction: 1989, control / centre distance // mm greates pass round over bed / mm Control: TRAUB System TX-8 Spindle clearance (max. bars ®) mm 42 Chuck © mm 200 Turning diameter mm 180 Turning length mm 450 max. circulation ® mm 450 Rotation ® via sorting device mm 350 Rotation ® crosswise tailstock mm 180 Kdodpoud Inmjfx Adweg Rotation ® over steady rest body mm 240 Longitudinal slide travel mm 490 Slide path flat mm 160 Spindle head DEN 55.026 = 26 - Spindle ® in front bearing mm 85 Power: 41 kW

Condition: used, turning diameter over bed / mm turning diameter over slide rest / mm turning length / mm total power requirement / kW weight of the machine ca. / t required space / m Conventional lathe with copying attachment and extensive accessories Turning diameter over cross slide: 240 mm Spindle bore: 52 mm Turning diameter: 360 mm Center height: 180 mm Turning length: 1,000 mm Overall length: 2,200 mm Overall width: 750 mm Overall height: 1,400 mm Maximum spindle speed: 1,750 rpm Min. spindle speed: 60 rpm Total weight: 1,800 kg Kdodpfev Rgzwox Adwsg All technical specifications are subject to change without notice. Deviations may occur depending on the year of manufacture, model, or condition of the machine. We assume no liability for the accuracy or completeness of this information.

Condition: used, Year of construction: 1969, turning diameter over bed 500-600 mm turning length 2800 mm bore diameter 130 mm weight of the machine ca. 5,25 t Kdodpovdx I Asfx Adwog required space / m