Used China for sale (169)

Condition: excellent (used), Bystronic Type: ERMM180 Thermoplastic applicator Field of application The thermoplastic applicator applies a thermoplastic material to rectangular glass panes rectangular glass panes as part of a production line for solar modules. The plastic forms a seal to a second pane of glass, which is applied in a later step. applied in a later work step. The panes are fed, applied and removed on horizontally running belts/belt conveyors. belts/conveyors. The thermoplastic applicator is a highly technical machine that has to fulfill many requirements with great precision. For this reason, you should only use products (glass, sealant) that meet the specifications on the following pages. the following pages. This helps to achieve high-quality and safe production. production. Performance and connected loads Maximum transport speed: 18 m/min Height of the glass running surface: 1100 mm Height of the applied sealant line: 0.5 to 1.2 mm Maximum width of the applied sealant line: 12.0 mm Required constant pneumatic inlet pressure: 6.5 to 8.0 bar Pneumatic operating pressure: 6.0 bar Compressed air consumption in normal operation: 10 standard liters/min Compressed air consumption when changing barrels: 500 standard liters/min Average energy consumption per hour: 10 kWh Working temperature of the sealant: 110°C to 130°C Ambient conditions and emissions Minimum ambient temperature: +15°C Maximum ambient temperature: +35°C Maximum relative humidity:: 75% Noise level: less than 70 dB (A) Requirements for the drums for the sealant Design: Material lidded container D18 according to DIN 6644 - with base (F1) and smooth outer surface (jacket design, smooth). Capacity: 216 liters Inner diameter: 571.5 mm Height: 874 mm Minimum wall thickness: 1.25 mm Machinable glass panes Types of glass Glass panes with a smooth surface can be processed (float glass). Dimensions and weights Smallest dimensions Largest dimensions Geometry 1198 mm 1200 mm Length LS 498 mm 600 mm Width BS 1.8* mm 5.0* mm Thickness DS Thermoplastics based on poly-iso-butylene (butyl) can be processed. The plastic must be flowable in the range of approx. 110°C to 130°C and have a defined viscosity curve. viscosity curve. Only use materials that have proven themselves in practice and that have been approved by the manufacturers of these materials and by Bystronic. by the manufacturers of these materials and by Bystronic for your intended use. intended use. For detailed product descriptions and information on handling, storage and disposal of the plastic disposal of the plastic used can be found in the information sheets and safety data sheets provided by the manufacturers of the plastics. Iedpfx Aasd N Erpobebc Dimensions of gantry robot with glass conveyor Height x width x depth: 2800 x 1890 x 2735 mm Weight of the gantry robot: 850 kg Weight of the glass conveyor: 1400 kg Drum pump dimensions Height x width x depth: 3320 x 1060 x 1200 mm Weight (without drum): 850 kg Weight (with drum): 1100 kg Height H for drum pump FP1: 4400 mm Height H for drum pump FP2: 4000 mm Control cabinet dimensions Height x width x depth: 2200 x 1800 x 600 mm Weight: 450 kg The applicator was used with the material butyl. Condition: second-hand / used From test laboratory, as good as new condition, only a few operating hours for testing! Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Year of construction: 2015, functionality: unexamined, For sale: Semi-automatic capsule filling machine for capsule production. Currently set up for size 0 capsules, complete with a vacuum pump. Also included is a semi-automatic capsule counter that automatically counts out the set quantity of capsules while packaging is being placed. (Both machines are being sold together as an inseparable package.) Ibjdpow D Et Defx Aabsc The equipment has seen very little use (only for production testing) and has been stored in a warehouse for many years. I cannot fully guarantee the technical condition of the capsule filler; however, when connected to power, all motors run properly, but a full technical inspection is recommended. The capsule counter has been checked and operates correctly, quickly counting the specified quantity (in multiples of 5 pieces). Details below: Capsule Filler: Manufacturer: Minsheng Pharmaceutical Machinery Co. Ltd Model: DJ-C Semi-automatic capsule filling machine Year of manufacture: 2015-7 Country of production: China Output: up to 10,000–25,000 capsules/h Machine weight: 330 kg Power supply: 400V 50Hz (3-phase) Power: 3.1 kW Manufacturer warranty period: out of warranty Availability: ready for pickup (to be confirmed) Dimensions: 135x70x160 cm Note: The capsule filler has visible dents on the housing (see photos) caused during transport, but the working elements are not damaged. Capsule Counter: Manufacturer: Minsheng Pharmaceutical Machinery Co. Ltd Model: HA-1 Capsule counting and filling machine Year of manufacture: 2015-7 Country of production: China Output: up to 10,000–25,000 capsules/h Machine weight: 330 kg Power supply: 220V 50Hz (1-phase) Power: 60 W Manufacturer warranty period: out of warranty Availability: ready for pickup (to be confirmed) Dimensions: approx. 150x70x50 cm The listed price is net. A VAT invoice is issued. For EU companies, 0% VAT for intra-Community supply. Assistance in organizing transport to the customer is possible. This is a courtesy listing; price and availability to be finally confirmed. The equipment is CE-marked (no manual or other documentation is included). We reserve the right to amend or withdraw the listing at any time without notice. This listing does not constitute a commercial offer as understood by commercial law.

Condition: new, power: 73 kW (99.25 HP), fuel type: diesel, color: other, Year of construction: 2022, operating hours: 10 h, Year of manufacture: 2022 Empty weight: 13.800 kg Dimensions (LxBxH): 770 x 259 x 282 cm Engine type: Isuzu 4JJ1XDJAG-01 CE mark: yes General condition: very good Technical condition: very good Visual appearance: very good Ibodpfx Aaeww Aicsbec Drivetrain Internship / Tier: Stage V / Tier V General Country of production: China Condition CE type: CE Unused SY135C with dozerblade, hammerlines, digging bucket, CE

Condition: excellent (used), functionality: fully functional, gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 310 l, color: yellow, overall weight: 20,500 kg, empty load weight: 20,500 kg, operation weight: 20,500 kg, maximum load weight: 7,000 kg, lifting power: 133 kg/m, lifting height: 9,870 mm, tire condition: 80 %, drive condition: 100 %, axle configuration: 4x4, number of seats: 1, first registration: 07/2023, mast type: telescopic, shovel volume: 1.2 m³, Year of construction: 2023, operating hours: 1,800 h, Equipment: 4 in one shovel, ABS, additional headlights, air conditioning, all wheel drive, cabin, differential lock, gripper hydraulics, hydraulics, onboard computer, parking heater, traction control, Currently en route by sea to Gdańsk, the just-purchased wheeled excavator originates from the Chinese market. We specialize in the professional import and export of all types of construction machinery from Asia. Need a different machine? Contact us today. Now available in our offer: a Hyundai 210W7 wheeled excavator in near-new condition! Inspected personally by us in Shanghai. Full service history – comes with GPS and additional buckets as shown in the pictures. The cost of such an excavator in the European Union exceeds €220,000 for the base machine alone, without GPS and extra buckets! Pre-sale special – secure a low price now, as the price will only increase upon arrival! Perfect for large construction projects and excavation works. Extremely mobile and capable in all terrains. Delivery to your site in approximately 10 weeks. Price includes delivery within Poland and up to 500 km into the EU! ===== Included in the price: • Complete documentation for registration. • If required, we can provide UDT inspection services quickly and for an additional fee. We offer all payment methods: Leasing, financing, cash, and bank transfer. With immediate payment by cash or transfer, you can drive your vehicle straight from our showroom. We also provide insurance services – we’ll calculate the lowest premium for any vehicle – TRY US! We also deliver purchased cars and trucks to any specified address across Europe. For more details, talk to our sales team. Technical specifications: Operating weight: 20,500 kg Transport dimensions:  • Length: 9,490 mm  • Width: 2,490 mm  • Height: approx. 3,100 mm Standard tyres: 10.00-20-16 PR Minimum turning radius (outer): 6,690 mm Fuel tank capacity: 310 liters Hydraulic oil tank capacity: 165 liters Hydraulic system pressure: 350 bar Hydraulic pump capacity: 2 × 222 l/min Engine & Performance: Engine type: Cummins B5.9-C, turbo diesel Displacement: 5.9 liters Max power: 124 kW (166 HP) at 1,950 rpm Maximum travel speed: 35 km/h Operating parameters: Max digging depth: 6,380 mm Reach: approx. 9,900 mm Digging height: 9,870 mm Dumping height: 7,050–7,160 mm Breakout force: approx. 133 kN Maximum load: up to 7 tons Cabin features: Full comfort operator cabin:  • Radio  • Air conditioning  • Heating Inspection report: Excavator fully operational, all cylinders and engine checked – NO leaks. Serviced regularly at Hyundai Machinery dealer in China. Tyre condition approx. 70%. Ibodpowy Hi Eefx Aabec High-quality steel, resistant to overloading and difficult terrain. Robust undercarriage protection, stable during operation (thanks to outriggers and dozer blade). Durable components proven in harsh conditions (e.g. mining, road construction). Note! Listed price is net, valid for export and for companies. Private buyers may benefit from significant discounts – We invite you to contact us directly by phone to negotiate your best price!

Condition: new, Grill marker TMCI PADOVAN ITALIA This machine is entirely made of stainless steel. The panels are at double bottom th. 100 mm with internal isulation. The marking group is composed by 2 rotary rolls with fixed step of 14,5 mm. Two infra-red gas-burners, complete with the whole control and safety instrumentation for a correct operation. Firebox power: max. 15000 Kcal/ora. Ibedpfx Aaohwf Uwobjc Techinal data: - Max installed power of the firebox: 18/43 kw (adjustable) - Product humidity: between 50% and 75% - Gas consumption: 2 m3/h Dimensions: - Loading height: 900 mm - Total length: 2500 mm - Total width: 1900 mm - Total height: 2000 mm

Condition: not inspected (used), functionality: unexamined, mileage: 1,000 km, power: 200 kW (271.92 HP), overall weight: 15,000 kg, fuel type: diesel, axle configuration: 6x6, Year of construction: 2011, Equipment: all wheel drive, cable winch, crane, navigation system, trailer coupling, macchina in fase di controllo Ijdpfx Aaowtthhebsbc

Condition: like new (used), Sealing machine as good as new can be your format. Ibjdpfjk R Tt Aex Aabsc Formats for Ø 99, 153, 83 available We have two machines in stock. One was only in the showroom and is therefore new but still 4 years old. The second machine was rented out a few times and has slight signs of use. 10-35 cans per min. depending on diameter and product. The used machine costs from 15000€ here costs for overhaul or format parts could be added. as you wish. The new machine costs from 19000€, here only format parts are added. These are machines that we have built with a manufacturer in China. Operation partly in German and English.

Condition: used, Year of construction: 2023, functionality: fully functional, turning length: 470 mm, turning diameter: 240 mm, travel distance X-axis: 355 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 525 mm, rotational speed (max.): 6,000 rpm, The DMG MORI CTX alpha 500, year 2023, is a high-precision and reliable lathe that can handle all machinable materials. With the addition of a bar feeder, it is ideally optimized for series production. Its sub-spindle enables fast and precise machining of both sides of the workpiece. Furthermore, the CTX features a Y-axis, which allows for certain milling operations to be performed directly, ensuring the fastest possible production process. Technical data: − Year of manufacture: 2023 (commissioned in December 2023) − Spindle hours: 969 h − X-axis travel: 355 mm − Z-axis travel: 525 mm − Y-axis travel: 80 mm − Maximum turning length: 470 mm − Maximum machining diameter: 240 mm − Maximum bar capacity: 65 mm − Maximum spindle speed: 6,000 rpm − Maximum speed of driven tools: 5,000 rpm Iodpfx Ajw Awk Eoabjbc − 12-position star turret, with all 12 tool positions driven − Sub-spindle with tailstock function − Bar feeder for automated production

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning diameter over cross slide: 755 mm, turning length: 750 mm, turning diameter: 365 mm, spindle speed (max.): 4,000 rpm, rotational speed (max.): 6,000 rpm, Mori Seiki NL 2500 SMC/700 with sub-spindle TECHNICAL DETAILS Control: MSX-850III Main spindle size: A2-8 Counter spindle size: A2-6 Main spindle bore: 80 mm Main spindle speed: 4,000 rpm Integrated main spindle motor: 18.5 kW Integrated motor for counter spindle head: 11 kW C-axis: main and counter spindle Motor starting torque: 640 N/m Turning diameter: 755 mm Ibsdpfx Aajwqc T Uobjc Machinable diameter: 365 mm Machinable length: 750 mm Speed of powered tools: 6,000 rpm Direct drive motor for powered tools: 5.5 kW Indexing time for turret change: 0.2 s Turret slots: 12 stations, all powered Rapid traverse speed: 30 m/min (X and Z axes) MACHINE DETAILS Weight: 6,500 kg Short bar loader: LNS Quick Load Servo II Measurement: Two arms for automatic measurement of Renishaw tools Interfaces: via USB, PCMCIA card, and RS 232 EQUIPMENT - C-axis on both spindles - Hainbuch clamping system BZI 65 - Three-jaw chuck Schunk 165 mm - Oil cooler for both Daikin spindles - Interface for bar feeder - Automatic parts gripper - Foot pedal for independent opening and closing of main and counter spindle chucks - Knoll filtration system with high-pressure pump - Transformer - Documentation

Condition: new, Type SX1325AP-2128 Axis: Useful working area axis X-Y-Z 2070-2800-100 mm Pieces clearance in Z 100 mm Max. traveling speed 70 m/min Ibededz Edqepfx Aaboc Max. working speed 30 m/min Working table: Phenolic multifunction Nr. of stops standard 10 (4X-6Y) Vacuum pump 4*5,5 kW(50/60 Hz), air cooled Electrospindle: Standard power (S6) 9,5 kW, ISO30 Max. speed 24 000 rpm Tool changer: ATC carousel for 12 positions Lubrication: Automatic centralized lubrication Installation: Installed power 22-33 kW Compressed air cosumption 450 NL/min Extraction air consumption 3000 m3/h Extraction air speed 25 m/sec Suction hood diameter 2x150 mm Made in China Weight 3500 kg

Condition: new, Year of construction: 2024, Open laser cutting machine with a source power of 1000W to 3000W, equipped with components from world-class manufacturers, enables fast cutting of metal sheets with dimensions of 1500x3000 mm. Fiber laser DESIGNED and FOLDED in POLAND. We configure lasers according to individual customer needs. THE BIGGEST ADVANTAGES OF A LASER ARE failure-free optical fiber no consumable parts The fiber laser source takes up about 1/3 less space high energy efficiency - 100,000 hours of operation universal use (special steel, black and stainless steel, copper, brass, aluminum, titanium) Fiber laser increases productivity by 80% lowers maintenance costs by 70% saves 80% energy minimizes gas consumption saves hall space by 30% Sliding gate made of seasoned aviation aluminum The construction of the sliding gate is made of seasoned aviation aluminum formed with a force of 4300 tons, achieving incredible stiffness. Aviation aluminum has many advantages: high stiffness (greater than cast iron), low weight, resistance to corrosion and oxidation, and good machinability. Long life. Collimator lenses and focusing lenses have a water-cooling heatsink, which lowers the temperature of the cutting head to extend the life of the cutting head. More adjustment range. Adjustment range -10mm~+10mm, precision 0.01mm, suitable for various types of 0~20mm tiles. Auto Focus (above 1500W) - Autofocus - The software automatically adjusts the focusing lens when cutting sheet metal of different thicknesses. The autofocus speed is ten times faster than the manual focus speed. Design screen The screen has a vertical display with fast response time, higher contrast, wider view, low power consumption and high resolution. In addition, it has high brightness and lower reflectivity, as well as greater durability. Welded bed made of rectangular profiles The construction of the bed has an internal structure resembling a honeycomb, made of many welded rectangular tubes. Stiffeners are placed inside the tubes, which increase the strength of the bed, and also increase the rigidity and stability of the guide rail to effectively prevent its deformation. High strength, stability, tensile strength, ensuring 20 years of use without distortion. Technical parameters WORKSPACE 1500x3000mm POWER 1500W (option: 1000W, 2000W, 3000W) REPEATABLE POSITIONING ACCURACY ±0.02mm/m MAXIMUM SPEED 40m/min DIMENSIONS 4280x2350x2000mm | 4780x2350x2000mm POWER 400V 50Hz 1. RAYTOOLS head 2. linear guides: HIWIN 3. gears and racks: YYC 4. DELTA servomotors 5. MOTOREDUCER gearbox 6. SMC pneumatic components 7. electronic components such as contactors, relays, sensors from: Schneider, OMRON, IDEM Ibsdpfx Aei Abxrsabsc 8. Program CypOne 9. Chiller(water cooler): S&A 10. TNS voltage stabilizer For more information please visit out web page and contact us.

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, workpiece weight (max.): 1,000 kg, working width: 2,000 mm, plate height: 5 mm, TECHNICAL DETAILS Inlet and outlet roller transport system for material lengths: 2.5 – 14 m Inlet dimensions: 2,100 × 600 mm Machinable panel width: 2,000 mm Panel thickness: min. 5 mm Ibedpfov U Ralex Aabsc Transport weight: max. 1,000 kg Blast unit Number of turbines: 6 C-380 turbines Turbine power: 11 kW per turbine Automatic adjustment: for the 4 outer turbines Throughput speed for BSa 2 12: 1 – 1.5 m/min Abrasive system Abrasive type: round, low-carbon lead shot or cut wire shot Abrasive hopper with screw conveyor: 2.2 kW Screw conveyor: available Bucket elevator with gear motor: 5.5 kW Belt monitoring sensor: Available Cleaning unit Brush system with air blast system: Available Automatic brush height adjustment: Available EQUIPMENT - Brush system with air blast system - Automatic brush height adjustment - Automatic adjustment of the outer turbines - Screw conveyor - Bucket elevator with belt monitoring

Year of construction: 2018, operating hours: 1,256 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 2189, OKUMA LB3000EX-II - is particularly suitable for universal turned parts and complete machining of complex workpieces thanks to generous flatbed guides and the high-torque drives ensure high precision and continuous accuracy TECHNICAL DETAILS Ijdpfx Aaont T Auobebc turning diameter over bed: 580 mm Machinable turning diameter: 340 mm workpiece length: 950 mm traverse X / Z / Y: 230 / 510 / 120 (+70/-50) mm C axis: 360 / 0.001 ° Control: OKUMA OSP-P300LA rapid traverse X / Z / Y: 25 / 30 / 12,5 m/min riveting stroke: 1015 mm spindle speed: 4200 rpm spindle end piece: JIS A2-8 spindle bore: 91 mm diameter spindle bearing: 140 mm tool holder: M-V12 with 12 places tool size: 25 x 25 mm tool diameter: 40 mm tool change time: 0,1 s Tool speed: 45 - 6000 rpm Operating hours: 1.256 h Control on: 1.660 h MACHINE DETAILS dimensions L x W x H: 3420 x 2041 x 2444 mm weight: 6600 kg Supply voltage: 400 V, 3 phases, 50 Hz Power drawn: 38,9 kVA Spindle power (30 min/continuous): 30 / 22 kW Spindle torque: (30 min/continuous): 700 / 512 Nm Tool power (25 min/continuous): 7.1 / 4.1 kW Tool torque (25 min/continuous): 40.4 / 23.4 Nm Note: The WTOH hobbing tool holder (see document in the appendix) is not part of the scope of delivery.

Condition: used, Year of construction: 2006, API tube mill 355mm x14mm (A3801) is line to produce pipes for petrol industries so can be perfect solution for your company to grow up API tube mill (Made in China), Forming machine is made in Japan OD 114–355mm wall thcikness: 4-14.3mm steel grade: N80 tube length:6-15m standard: API 5CT N80 scope of supply: – slitting line; Ibedsv Hcwtopfx Aabec – tube mill; – two end facing machines; – two hydro testers; – 1 tube straightening machine, rolls (OD 114.3, 139.7, 219.1, 273.05, 323.9, 339.72 , 355.6mm) machine was made in 2006, stopped running in 2016. used seam annealer and HF welder, brand: Thermatool. Used slitter, Chinese brand. thickness: 4–14mm, N80, Q235, hot rolled steel. max coil width 1600–1700mm. 2+5 leveler DC motor: 55kw slitter DC motor: 160kw scope of supply: – coil car; – uncoiler (with 4 colums); – hold down roll; – peeler table; 2+5 leveler; – shear; – conveyor and loop; – guiding device; – slitter; – tension unit; – recoiler with support arm; – coil car; – approximate 12 slitting blades; – electric cabinet, hydraulic system. slitter is for tube mill

Condition: new, functionality: fully functional, machine/vehicle number: KB-1909, Year of construction: 2025, operating hours: 3 h, load capacity: 4,000 kg, lifting height: 3,000 mm, fuel type: diesel, mast type: duplex, construction height: 2,200 mm, power: 42 kW (57.10 HP), motor manufacturer: Xinchai, gearing type: automatic, fork length: 1,000 mm, tire condition: 100 %, empty load weight: 4,720 kg, total height: 2,200 mm, total length: 3,890 mm, total width: 1,410 mm, color: light blue, Brand: LTMG Model: FD40 Iodpfx Aswpp Uceabsbc Year of manufacture: Unused, 2025 Serial number: On request Operating hours (read): 3 Engine brand: Xinchai Engine model: A495BPG Fuel: Diesel Dimensions LxWxH (mm): 2890 x 1410 x 2195 Weight (Kg) approx.: 4720 Quantity in stock: 2 Undercarriage (condition in %): 100 Capacity (Kg): 4000 Max. working height (mm): 3000 Clearance height (mm): 2195 Manufactured in: China Comments: Unused 4000 kg diesel forklift, duplex mast, competitive price offer!

Year of construction: 2023, condition: as good as new (ex-display), Place of Origin China Classification Laboratory Centrifuge Brand Name MKE Ibsdpfxjnudwfj Aaboc Model Number TCT12-V(Vertical) (old model: XJ8) Product name Hospital Use Low Speed Cytology Smear Cell Centrifuge TCT12-V Max speed 4000rpm Max RCF 1735xg Max capacity 12 cell slide clips Application Hospital, Laboratory Certificate CE/ISO9001/ISO13485 Matched Rotors Round disc vertical rotor Power supply AC 220V 50Hz 5A Warranty 1 year warranty for the whole machine Display LED The unit is ex-display with only minor use. Good working condition. Please check out our other listings as well.

Condition: new, Year of construction: 2024, Open laser cutting machine with a source power of 1000W to 3000W, equipped with components from world-class manufacturers, enables fast cutting of metal sheets with dimensions of 1500x3000 mm. Fiber laser DESIGNED and FOLDED in POLAND. We configure lasers according to individual customer needs. THE BIGGEST ADVANTAGES OF A LASER ARE failure-free optical fiber no consumable parts The fiber laser source takes up about 1/3 less space high energy efficiency - 100,000 hours of operation universal use (special steel, black and stainless steel, copper, brass, aluminum, titanium) Fiber laser increases productivity by 80% lowers maintenance costs by 70% saves 80% energy minimizes gas consumption saves hall space by 30% Sliding gate made of seasoned aviation aluminum The construction of the sliding gate is made of seasoned aviation aluminum formed with a force of 4300 tons, achieving incredible stiffness. Aviation aluminum has many advantages: high stiffness (greater than cast iron), low weight, resistance to corrosion and oxidation, and good machinability. Long life. Collimator lenses and focusing lenses have a water-cooling heatsink, which lowers the temperature of the cutting head to extend the life of the cutting head. More adjustment range. Adjustment range -10mm~+10mm, precision 0.01mm, suitable for various types of 0~20mm tiles. Auto Focus (above 1500W) - Autofocus - The software automatically adjusts the focusing lens when cutting sheet metal of different thicknesses. The autofocus speed is ten times faster than the manual focus speed. Design screen The screen has a vertical display with fast response time, higher contrast, wider view, low power consumption and high resolution. In addition, it has high brightness and lower reflectivity, as well as greater durability. Welded bed made of rectangular profiles The construction of the bed has an internal structure resembling a honeycomb, made of many welded rectangular tubes. Stiffeners are placed inside the tubes, which increase the strength of the bed, and also increase the rigidity and stability of the guide rail to effectively prevent its deformation. High strength, stability, tensile strength, ensuring 20 years of use without distortion. Technical parameters WORKSPACE 1500x3000mm POWER 2000W (option: 1000W, 1500W, 3000W) REPEATABLE POSITIONING ACCURACY ±0.02mm/m MAXIMUM SPEED 40m/min DIMENSIONS 4280x2350x2000mm | 4780x2350x2000mm POWER 400V 50Hz 1. RAYTOOLS head 2. linear guides: HIWIN 3. gears and racks: YYC 4. DELTA servomotors 5. MOTOREDUCER gearbox 6. SMC pneumatic components Ijdoiznmpepfx Aabobc 7. electronic components such as contactors, relays, sensors from: Schneider, OMRON, IDEM 8. Program CypCut 9. Chiller(water cooler): S&A 10. TNS voltage stabilizer

Year of construction: 2020, condition: new, functionality: fully functional, The stainless food industry (pharmaceutical industry) mixing bowl shown in the picture is for sale. It has no cooling or heating. The cauldron is 200 liters, the speed of the high-performance mixer can be regulated, and the mixing stem has a scraper. It can be vacuumed and pressurized. New never used. Year of manufacture: 2020. Good quality made in China. Suitable for mixing creams, sauces, dressings or any other material with high viscosity under vacuum or pressure. Ibsdpsuwrikjfx Aabec New price approx. 20,000 EUR

Year of construction: 2019, operating hours: 1,370 h, condition: excellent (used), functionality: fully functional, OKUMA GENOS L-3000 - for powerful cutting and long tool life for all batch sizes thanks to flat guides and heavy turret design TECHNICAL DETAILS turning diameter over bed: 520 mm Machinable turning diameter: 300 mm workpiece length: 450 mm traverse paths X / Z: 235 / 520 mm C axis: 360 / 0.001 ° Ibjdpent T Afefx Aabjc Control: OKUMA OSP-P300LA-e rapid traverse X / Z: 25 / 30 m/min riveting stroke: 400 mm spindle speed: 38 - 3800 rpm spindle mounting: A2-8 spindle bore: 80 mm diameter spindle bearing: 120 mm tool holder: M-V12 with 12 places tool size: 25 x 25 mm tool diameter: 40 mm Tool speed: 45 - 4500 rpm switch-on time: 5267 h control time: 1919 h Spindle time: 1370 h MACHINE DETAILS dimensions L x W x H: 2545 x 1870 x 1791 mm Weight: 5000 kg Spindle power (20 min/continuous): 22 / 15 kW Spindle torque: (20 min/continuous): 412 / 281 Nm Tool power (30 min/continuous): 7.0 / 3.3 kW Tool torque (30 min/continuous): 23.7 / 14.2 Nm

Condition: like new (used), Year of construction: 2022, operating hours: 200 h, functionality: fully functional, screw diameter: 70 mm, overall weight: 600 kg, clamping force: 80 kN, total width: 2,800 mm, total length: 4,000 mm, total height: 2,260 mm, Main Features: 1. Computer Control System (PLC) – Japanese Mitsubishi PLC 2. Electrical Cabinet – All electrical components are sourced from globally renowned brands, ensuring quality and stability. 3. Touch Screen – Innovation computer control system 4. Advanced Hydraulic Cylinder from Germany 5. Linear Guideway 6. ABB Inverter from Switzerland & Rexroth from Germany 7. Large Diameter Galvanized Steel Pipes 8. Electric Lifting Platform 9. Ceramic Heater 10. Hydraulic System & Valve Connections – From Yuken Industry Technical Specifications: • Suitable Material: PE, PP, and others • Max Volume: 6 L • Production Capacity: 170-260 pcs/h • Dimensions: 4.0 × 2.26 × 2.8 m • Weight: 6T Plasticization System: • Reducer: Hard finishing, high strength, low noise • Screw: Ø 70 mm, L/D ratio 24, 38CrMoALA, cooling system available • Plasticization Capacity: 100 kg/h (HDPE) • Heating Zones: 3-4 aluminum heaters, automatic heating • Heating Power: 12 kW/h • Extruder Motor: Three-phase asynchronous motor (380V, 50HZ) • Cooling Fan: 4 zones, automatic cooling Extrusion System: • Material: High-grade alloy steel, central feeding • Number of Die Heads: 1 • Max Die Mouth Diameter: Ø 160 mm • Heating Zones: 4, stainless steel heating cycle • Heating Power: 5-7 kW Clamping System: • Features: High strength, rigidity, central mold locking, stable mold opening & closing • Clamping Force: 80KN • Template Distance Adjustment: 170-520 mm • Max Mold Size: 380 × 420 mm Electric System: • Automatic Monitoring, Fault Alarms, Auto Counting, Auxiliary Functions Ibjdpfxov Iflps Aabsc • Control Interface: Touchscreen with self-diagnosis alarm system • Temperature Control: Automatic temperature control module • Motion Control: Inovance (Chinese/English version) Hydraulic System: • Features: Multi-functional integrated hydraulic block, proportional control, high efficiency • Oil Pump Motor: Three-phase asynchronous motor (380V/220V, 50/60HZ) • Oil Pump: Imported double pump • Valves: Imported oil pump valves and connections • Oil Pipes: Double-layer wear-resistant • System Pressure: 60 kg/cm² • Cooling System: Separate water cooling cycle, oil cooler Pneumatic System: • Brand: Taiwan AIRTAC pneumatic system • Air Pressure: 0.6 MPa • Air Displacement: 0.8 m³/min • Electromagnetic Valve: Taiwan AIRTAC Main Components: Electronic Parts: • PLC Control System: MITSUBISHI from Japan • Touch Screen: INOVANCE • Temperature Controller: HUICHUAN • Auxiliary Relay: OMRON • Contactor: Schneider from France • Electric Motor: Three-phase 380V • Power Source: TAIWAN MEANWELL • Transducer: ABB from SWITZERLAND Hydraulic Parts: • Oil Pump: TAIWAN HIGH-TECH • Valve: YUKEN • Oil Pump and Connection: YUKEN • Sealed Part: HALLITE Air Control System: • Cylinder: AIRTAC • Air Valve: AIRTAC This blow molding injection machine was purchased directly from a factory in China for a specific project that was never realized. The machine was used for only one month. Location: Siemianowice Slaskie, Poland We also have peripheral equipment available for sale, such as: • 5 HP AIR COOLING SYSTEM • Auto Loading • 150 kg Color Mixer • Scraps Crusher

Condition: new, functionality: fully functional, machine/vehicle number: Auf anfrage, Year of construction: 2025, operating hours: 2 h, load capacity: 4,000 kg, lifting height: 3,000 mm, fuel type: diesel, mast type: duplex, construction height: 2,200 mm, power: 42 kW (57.10 HP), motor manufacturer: Xinchai, gearing type: automatic, fork length: 1,000 mm, tire condition: 100 %, empty load weight: 4,720 kg, total height: 2,200 mm, total length: 3,890 mm, total width: 1,410 mm, color: yellow, Equipment: pallet forks, Brand: LTMG Model: FD40 Year of manufacture: Unused, 2025 Serial number: On request Operating hours (read): 2 Engine brand: Xinchai Engine model: A495BPG Fuel: Diesel Dimensions LxWxH (mm): 2890 x 1410 x 2195 Weight (kg) approx.: 4720 Number in stock: 2 Uptime (condition in %): 100 Capacity (kg): 4000 Ibjdpfewpp S Iex Aabec Max. working height (mm): 3000 Passage height (mm): 2195 Made in: China Comments: Unused forklift 4000 kg at a competitive price!

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 7,470 mm, travel distance Y-axis: 590 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 24,000 rpm, number of slots in tool magazine: 15, Equipment: chip conveyor, documentation/manual, No minimum price – guaranteed sale to the highest bidder! Original price was approx. 200,000 EUR TECHNICAL DETAILS Travel path X-axis: 7,470 mm Travel path Y-axis: 590 mm Travel path Z-axis: 400 mm C-axis: 360° A-axis: available Number of axes: 5 Software: ITALCAM 3D Electrospindle power: 12 kW (0/24,000 rpm) Maximum torque: 9.5 Nm at 12,000 rpm Spindle speed: 24,000 rpm Spindle nose: HSK 63 F Number of spindles: 1 Number of slots in the tool magazine: 15 Spindle cooling: liquid Isdpfx Aajwqfi Esbebc Work area: 2 Machinable sides: 5 Standard clamping devices: 12, independently positionable Tool magazine: 15-position tool holder mounted on the slide Clamping force: 130 kg per clamping device Lubrication nozzles: 1 at the electrospindle Tank capacity: 2.2 liters Slide lubrication: automatic MACHINE DETAILS Dimensions (L x W x H): 9,800 x 3,100 x 3,000 mm Transport dimensions (L x W x H): 9,500 x 2,150 x 2,500 mm Weight: 3,500 kg Rated power: 18 kW Current consumption: 32 A Voltage: 400 V three-phase with transformer Frequency: 50/60 Hz Air pressure: 7 bar Accuracy: 0.1 mm Operating temperature: 10 to 35 °C Air humidity: 75 % Standard colors: RAL 7015 Chip conveyor system: chip conveyor belt Machine safety: safety light barrier on three sides of the machine Operating interface: 17-inch LCD monitor EQUIPMENT - Documentation/manual - Infinitely variable speed setting - Chip conveyor - USB port on the control panel

Condition: new, Metallkraft FSBM 1020-20 S2 Manual swing bending machine With workpiece clamping by means of foot pedal. DESCRIPTION - Workpiece clamping by foot pedal, leaving both hands free for material feeding - Different tool variants available E, S2, HS2 and HSG - The powerful auxiliary cylinder facilitates bending - Wide clearance between upper and lower beam of up to 25 mm - Self-lubricating slide bearings - Clamping pressure of the upper beam easily adjustable by means of easy-grip knurled screws - Adjustment of material thickness by knurled screw - Adjustable stop for bending angle Equipment details: - With segmented sharp bending tools, segmented bending bar and continuous bed support TECHNICAL DATA General information Ijdokzk Exepfx Aabsbc Working width max.: 1020mm Bending angle max.: 135 Segmentaufteilung: 25-30-35-40-45-50-75-100-150-200-270mm Dimensions and weights Length (product) approx.: 1350mm width/depth (product) approx.: 800mm Height (product) approx.: 1130mm Weight (net) approx.: 325kg Bending capacity bending capacity 235 N/mm²: 2,0mm Bending capacity 700 N/mm²: 1,2mm Explanation Bending capacity: 700 N/mm²Hardened upper tools are required for bending VA Bending capacity aluminum: 2.4mm Made in China PLEASE ASK FOR OTHER MODELS

Condition: like new (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 201805015, working length: 4,100 mm, feed length X-axis: 600 mm, feed length Y-axis: 300 mm, total width: 1,550 mm, total length: 3,560 mm, total height: 2,850 mm, pressing force: 185 t, overall weight: 18,000 kg, space requirement height: 3,440 mm, table length: 4,100 mm, installation height: 500 mm, Lightly used press brake in excellent condition. 185 tons, 4 meters, 6 axes No. 4 rear backgauges, No. 2 retractable pneumatic supports ESA 660W CNC LAG press brakes represent the perfect combination of Italian technological innovation, meticulous attention to detail and design, and the substantial production capabilities of China. These strengths, combined with the highest quality European components, allow LAG to offer its customers press brakes, shears, and inserting machines with the best price-to-performance ratio on the market. This is the top-of-the-line model, equipped with accessories and automation for highly profitable performance. Main standard configuration of the G-TOP press brake: - G-FLEX crowning compensation system Ijdpfx Aaowync Hjbebc - G-CS active crowning system - 6 axes (Y1-Y2-X-R-Z1-Z2) - Dual pump system: one main power pump and one pump dedicated to the crowning system - DSP AP safety system - Touchscreen control panel on the electrical cabinet - Sliding front supports - Touchscreen CNC control - Reference 4-axis rear backgauge system, model GRP-4 (X-R-Z1-Z2)

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 60,000 kg, Brand: Bosch Year of manufacture: Unused, 2022/2023 Ijdpfxowk Iy Ho Aabebc Weight (kg): approx. 60,000 net Number of units in stock: approx. 160,000 Made in China Comments: List available upon request Sales conditions: Smaller quantities possible, contact us for prices