Used Chiron Fz 18 for sale (87)

Condition: used, 5 axis: yes Milling and turning: yes 5 axis machininng center (milling/turning from bar) Under power in our warehouse MAKE CHIRON MODEL MILL 800 5 axis Hnsdpfx Aljgph Rne Dor CNC Fanuc 18iMBS (5 simoultaneous axis 1*) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindle 20-12.000 min.’ – 140 Nm.12.000 RPM 12,5 KW/Max 34kW Swivelling head (CNC controlled) ± 100° Low hours This machine can be inspected under power in our Warehouse Mimu Machine Tools (Italy)

Year of construction: 1962, condition: good (used), machine/vehicle number: 162487, Suction capacity: 50 l/min Maximum operating pressure: 10 bar Compressor speed: 1400 rpm Tank: Hnedpodyp R Rsfx Al Der Operating pressure: 10 bar Capacity: 50 l

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 550 mm, controller model: Fanuc 18i MB5, rotational speed (max.): 20,000 rpm, TECHNICAL DETAILS Travel X-axis: 800 mm Travel Y-axis: 500 mm Travel Z-axis: 550 mm Main Spindle Type: HSK-A63 Max. speed: 20,000 rpm Turning Spindle Collet Chuck: Hainbuch SK65 BZI Max. speed: 4,000 rpm Bar capacity: approx. 65 mm MACHINE DETAILS Control: Fanuc 18i MB5 Drive power min.: 30 kVA Drive power max.: 50 kVA EQUIPMENT Tool measuring system: Blum Laser Control NT Hjdpjyn Ncpsfx Al Dsnr Additional magazine (92 tool stations) Coolant system / Paper band filter / High-pressure internal coolant supply (IKZ) Spindle chiller Bar feeder: Breuning RBK 10012 Inserts: 20 mm, 25 mm, 30 mm, 35 mm, 40 mm, 45 mm, 50 mm, Max. diameter: 60 mm Please note: No oil mist extraction, no CO2 extinguishing system included. Machine disassembly will be carried out by Chiron on 24.03.2026. Chiron will also perform a data backup.

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 6,000 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 550 mm, controller manufacturer: SIEMENS, controller model: n/a, number of axes: 4, This 3-axis CHIRON Mill 6000 SK was manufactured in 2004, featuring a high-speed motor spindle at 12,000 rpm and a travel range of X 6,000 mm, Y 630 mm, Z 550 mm. It includes a 5-axis milling package, 92 tool positions, and a Marposs collision monitoring system. Ideal for long part machining up to 6,000 mm and pendulum machining. If you are looking to get high-quality milling capabilities consider the CHIRON Mill 6000 SK machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits Hjdpfx Aljx Nr Irs Dsnr • 92 tool positions hsk-a63 (background magazine) • Long part machining up to a maximum of 6000 mm • Machining of the end face (5th side) horizontally with swivel head (right/left) • Pendulum machining via center partition, max. Workpiece length 1773 mm with sk machining on both end faces (tool length 120 mm) • 4 hydraulic double vices (fixed center jaw) per pendulum section, positioning, and clamping via linear system (hydraulic release, mechanical clamping) Extra Information Additional Equipment High-speed package with Motor Spindle: 12000 rpm, 140 Nm Production Package: Scraper belt conveyor, discharge height 1050 mm Internal coolant preparation KNOLL VRF250 vacuum rotary filter (suitable for steel, cast iron, aluminum, plastic, brass) High pressure 70 bar with HP pump and variable valve Flushing gun per pendulum field Emulsion mist extraction, 2 fans each 800 m²/h Rotating viewing window left and right (1400 mm from machine center) Automatic loading doors Center partition for pendulum machining 5-Axis Milling Package Air Blast Tool Life Monitoring Additional V24 RS232 in the control cabinet BDE/MDE interface (statuses: machine on, machine running, part counter) Marposs (Brankamp) CMS100 Collision Monitoring System 3D machine model for kinematic simulation in the CAM programming system 210 bar hydraulic power unit, 2 clamping circuits, separate system clamping pressure for each pendulum field, clamping pressure control KOHN linear clamping system 8 KOHN Multi 2000 MFS 125/680 HD hydraulic vices Two-part operator step across the entire operating width of 6000 mm With the 3 axes x, y, z and the swivel head, the software package 5-axis milling can be used to mill shapes, e.g. a curve. The software then synchronizes the axes.

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 550 mm, controller manufacturer: SIEMENS, controller model: Sinumerik, table width: 550 mm, table length: 2,600 mm, spindle speed (max.): 12,000 rpm, number of axes: 4, This CHIRON MILL 2000 Vertical Machining Center was manufactured in the year 2003. It is equipped with a Siemens Sinumerik control unit. The machine has a spindle speed of 12000 rpm. Additional equipment • Chip conveyor Machine Benefits Hodpfx Aeyi Eh Dsl Dsnr Technical Machine Benefits • Rapid feed 40 m/min • Tool magazine with capacity for 24 tools

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 685 mm, travel distance Z-axis: 630 mm, controller model: Siemens 840D, rotational speed (max.): 20,000 rpm, The machine spindle was replaced in 2022! The original purchase price of the machine was EUR 600,000! TECHNICAL DETAILS Travel range X-axis: 2000 mm Travel range Y-axis: 685 mm Travel range Z-axis: 630 mm Rapid traverse on all axes: 40 m/min Axis acceleration: 0.25 g Max. spindle speed: 20,000 rpm Max. rotary table speed: 1,000 rpm Tool changer positions: 92 Tool holder: HSK 63 NC swiveling axis: ± 100° MACHINE DETAILS Control: Siemens 840D EQUIPMENT Remote diagnostics and teleservice Maintenance instructions displayed on screen 5-axis milling package Fixed table with integrated rotary table Kessler milling rotary table DTE 520 NC swiveling head with spindle stock Direct measuring systems Chip conveyor (hinged belt) Coolant system HL 450 / 900 (IKZ) Full-flow cleaning via paper band hydrostatic filter HL450 Hedpfx Aloymnyko Dsnr Coolant filtration 50 µm nominal Chip blow gun Coolant recooling unit Additional tray rinsing Machine preparation for air through spindle Work area extraction system Safety package MILL 2000 with reinforced cabin and safety glass Zero point clamping system NSL tur 570-5-Z for DTE 520 Tool breakage monitoring Measuring probe Renishaw OMP 40-2LS Rotating inspection window Chiron Power Service Siemens CNC control with OP019 19" color display Operating mode: 4 MCIS DNC for sending and receiving CNC programs in network operation Siemens tool life monitoring Measurement in JOG (zero point determination during setup in jog mode) Loading and unloading station for tools for main time parallel tool change on background magazine Additional window for background magazine Swiveling control panel for optimal visibility of the work area during setup Note: The two vices on the NC rotary table as well as the tool holders in the tool changer are not included in the offer.

Year of construction: 2006, operating hours: 82,068 h, condition: good (used), functionality: fully functional, machine/vehicle number: 258-22, Moving column machine in steel-concrete composite construction with workpiece changing device. Low-maintenance model from the world-renowned manufacturer CHIRON. Double spindle - vertical - machining center incl. chip conveyor KNOLL AE 1058.009 and a compound unit (already dismantled). Prescribed maintenance intervals for plant and plant parts have always been observed. TECHNICAL DETAILS Drilling capacity in steel: 60: 2 x 6 36 mm (with insert drill) Guides: with long term grease lubrication speed range: 20-12.000 rpm CNC control: SIEMENS 840D spindle distance in X-axis: 250 mm X-axis: 300 mm Y-axis: 400 mm Z-axis: 425 mm (with variable tool change plane) rapid traverse speed 60 m/min in X-, Y- and Z-axis Main spindle drive: 1 piece with 2 AC motors power at 100 % ED: 9,5 kW power at 15 % ED:14,0 kW Drive: digital direct drives with indirect absolute path measuring system (no reference point approach) tool places: 212 Tool diameter: max. 65 mm Tool diameter with free neighboring places: max. 175 mm Tool weight: max. 2.5 kg (5.0 kg at 2 stations) Tool change time: approx. 0.9 s (depending on control) Chip-to-chip time: approx. 2.1 s (control-dependent) Workpiece changing device: 0 / 180 Tool holder: HSK A 63 1 MACHINE DETAILS type of current: 3 / N / PE - 50/60 Hz operating voltage: 400 V power: 44 kVA rated current: 63 A Coolant system HL 450 / 900 LATE CONVEYOR Manufacturer: KNOLL Type: AE 1058.009 Year of manufacture: 2006 Hnodpfx Alsmt A Ivo Djr EQUIPMENT - CHIRON maintenance manual on screen - Operating hours and piece counter - Socket 230 V - Socket for portable mini handwheel - Control cabinet cooler as door-mounted unit - Signal lamp - splash guard cladding - chip conveyor - mini control panel - Rinsing gun - Central pneumatic connection - Fixture flushing - 70 bar HP pump - 1 internal cooling package with suction unit - Fully enclosed working chamber - Extraction unit with air cleaner - Extraction capacity 800 m³/h - CHIRON mold life monitoring with: - Automatic loading door of the splash guard - "opening" and "closing", actuation via two-hand start release - Integrated IWW 0/180° workpiece changing device - Chiron Lasercontrol Single F500 - Ethernet connection RJ45 at the control cabinet instead of in the control panel - Pneumatic and hydraulic connections - Central hydraulic and pneumatic connection prepared for max. 20 connections, 6 connections are designed including connection couplings, 4 of them for hydraulics, max. 210 bar and 2 for uncontrolled pneumatics. - 4 Additional hydraulic connection(s) - Hydraulic power unit - 2 Hydraulic aggregate extension for further clamping circuits

Condition: excellent (used), Year of construction: 2013, Heidenheim TNC 530, SK 40, 12,000 rpm, 40 tool positions, through-spindle coolant, direct measuring system on all axes, central lubrication system, automatic loading doors, measuring probe, Hjdpfx Alsxfqyvs Donr

Condition: used, Year of construction: 2006, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 550 mm, Chiron MILL 2000 Machining Center For sale is a Chiron MILL 2000 machining center from 2006. The machine is in good condition and ideally suited for the machining of large and long workpieces. Manufacturer: Chiron Model: Mill 2000 Year of manufacture: 2006 Technical specifications: • Travel: X 2000 mm / Y 500 mm / Z 550 mm • Spindle: 12,000 rpm HSK 63 • NC swivel head • Tool magazine: 40 positions (chain magazine) • Control: Siemens • Machine weight: approx. 9,600 kg Hnedpfx Alexcpy Ne Dsr Equipment: • 40-position tool magazine • Chip conveyor and coolant system • NC swivel head • High-pressure system Condition & Service: The machine is fully operational and available immediately. Loading and transport can be arranged. Location: Germany (Stuttgart area) Price: negotiable

Condition: ready for operation (used), Year of construction: 2007, operating hours: 16,000 h, functionality: fully functional, machine/vehicle number: 259-45, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, controller model: Siemens 840 D, spindle speed (max.): 12,000 rpm, The following automation is also being auctioned from the same location: System 3R Workpartner (Search ID: 21119877) System 3R Workpal 1 (Search ID: 21119737) System 3R Transformer Workmaster (Search ID: 21119557) TECHNICAL DETAILS X-axis travel: 800 mm Y-axis travel: 550 mm Z-axis travel: 550 mm Tool holder: HSK 63 Spindle speed: 12,000 rpm Number of tool positions: 65 MACHINE DETAILS Control: Siemens 840 D Spindle hours: approx. 16,000 h EQUIPMENT Knoll chip conveyor Knoll paper belt filter Blum LaserControl laser measuring system Renishaw digital 3D touch probe Automation interface Automatic door Hsdpfx Alsyfum Uo Donr Oil mist extraction Internal coolant supply

Condition: used, Rotary indexing thread tapping machine, 8-station rotary table. 1 inspection station, 1 vertical and 1 horizontal thread tapping unit. With guide bush 1 mm pitch Chiron, thread tapping unit with guide bush 0.7 mm pitch, M4. One discharge station, coolant system. Hodpfx Aljyl Ntpj Djnr

Condition: good (used), Year of construction: 2004, travel distance X-axis: 6,000 mm, travel distance Y-axis: 630 mm, Chiron Mill 6000 / 2013, completely overhauled by Chiron. Year of manufacture: 2004 / overhauled in 2013. Equipped with Siemens 840D control system. Travel X/Y: 6000/630 mm. Pendulum machining possible. 92-position tool changer. HSK-A 63 tool holder. Spindle speed up to 12,000 rpm. Spindle replaced in 2021. NC swivel milling head. Hydraulic unit with 210 bar. 2 hydraulic clamping circuits. Separate clamping pressure control per pendulum field. Clamping pressure monitoring. Pneumatic workpiece stop. 2 separately controllable pneumatic lifting devices. Brankamp collision monitoring system. Scraper belt conveyor. OKZ prepared. Knoll vacuum rotation filter. Rotating viewing window. Automatic loading doors. 5-axis milling package. IKZ 70 bar (internal coolant supply at 70 bar). Oil mist extraction. Pendulum machining possible. Pendulum machining X-axis travel: 1773 mm with face machining (tool length: 120 mm). Linear clamping system with 8 vices. Hnedpfx Alow N Nvfe Djr