Used Citycat 5000 for sale (2,130)

Condition: used, tank capacity: 5,000 l, GENERAL Equipment: Crane lugs Design: vertical Remarks: Heating/cooling jacket can also be operated at 3 bar and 143°C (see photo of the nameplate); minor dents in the insulation jacket; sheet metal incisions in the insulation (especially in the lower base) External diameter: 1,830 mm Internal diameter: 1,690 mm Total height: 3,300 mm Heating/cooling: available Insulation: available Max. permissible operating temperature: 100 °C Max. permissible operating pressure: 4.0 bar Agitator: agitator flange Location: Bremen Cylinder temperature control: Thermoplate Nameplate: Volume: 5,000 liters Double jacket volume: 58.0 liters Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 2,100 mm Previous application: food industry TANK Max. permissible operating temperature: 100 °C Support type: feet Number of feet: 3 pcs. Duedjyciy Rspfx Agfer HEATING/COOLING JACKET Bottom temperature control: Thermoplate INSULATION Insulation jacket: welded Insulation jacket material: stainless steel EQUIPMENT Manway / dome: in top head (DN 500) Outlet: 50 mm Note: slight residues MATERIAL PROPERTIES Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel AGITATOR Agitator arrangement: off-center in top head

Condition: used, tank capacity: 5,000 l, GENERAL Design: vertical Remarks: Manhole approx. 310 x 410 mm; minor dents in the cylinder Internal diameter: 1,490 mm Dedpfx Aeyck D Rsgfeur Total height: 3,550 mm Location: Bremen Volume: 5,000 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,650 mm Last application: fruit juice TANK Support type: feet Number of feet: 4 pcs EQUIPMENT Manhole / dome: on the cylinder Outlet: DN32 DIN 11851 Note: slight residue MATERIAL SPECIFICATION Feet material: stainless steel

Condition: used, tank capacity: 5,000 l, GENERAL Equipment: Crane lugs Design: upright Remarks: 1 pipeline inside the tank; heavier internal residues Speed: 100 / 200 RPM Internal diameter: 1,540 mm Total height: 4,600 mm Power: 4.7 / 5.9 kW Agitator: propeller Location: Bremen Nameplate: Volume: 5,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Dujdpfxsycluqs Agfor Cylindrical height: 2,500 mm Last application: paint industry TANK Base design: on legs Number of legs: 4 units EQUIPMENT Manhole / dome: on the top head (DN 500) Outlet: flange DN80 MATERIAL SPECIFICATION Material of legs: stainless steel AGITATOR Voltage: 400 V Bottom bearing: Agitator arrangement: eccentric in the top head

Condition: used, tank capacity: 5,000 l, GENERAL Equipment: Spray head Design: upright Remarks: 1 dent in the inner tank (overpressure from the non-functional heating jacket; see photos); insulation jacket with minor dents and partially detached panels; tank has interior residues; mounts for load cells under the feet (3 loose load cells are included in the scope of delivery; these were not considered in the total height specification) Speed: 52 rpm External diameter: 1,900 mm Internal diameter: 1,790 mm Total height: 4,150 mm Agitator manufacturer: Jongia Insulation: available Power: 0.37 kW Agitator: paddle agitator Agitators: 3 agitators Agitator element: propeller Dsdpfoxqc Sbox Agfeur Support: feet Location: Bremen Volume: 5,000 liters Product contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 2,100 mm Last application: food TANK Number of feet: 3 pcs INSULATION Insulation jacket: bolted Insulation jacket material: stainless steel EQUIPMENT Manhole / dome: in the top head (DN 500) Outlet: 48 mm MATERIAL SPECIFICATION Foot material: stainless steel AGITATOR 2 Agitator arrangement: off-center in the top head Speed: 450 / 965 rpm Voltage: 400 V Power: 1.1 / 4.4 kW AGITATOR 1 Agitator manufacturer: Jongia Voltage: 230/400 V Agitator arrangement: central in the top head Agitator equipment: Propeller 3: agitator data no longer reliably readable; probably 460 / 920 rpm

Condition: used, tank capacity: 5,000 l, GENERAL Design: upright Notes: Manhole approx. 320 x 420 mm; tanks are partially marbled on the outside; the foot lengths on the individual tanks differ slightly (usually one foot is shorter than the other two; the feet should be modified or shimmed accordingly before reinstallation); one tank has a small dent in the upper cylindrical area (see photos) Internal diameter: 1,370 mm Total height: 3,950 mm Location: Bremen Volume: 5,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 3,000 mm Previous application: winery TANK Support type: feet Number of feet: 3 pcs EQUIPMENT Manhole / access hatch: in the cylinder Outlet: 90 mm Note: slight residues Dodpfxeyckqds Agfeur MATERIAL SPECIFICATIONS Foot material: stainless steel

Condition: used, tank capacity: 5,000 l, GENERAL Design: vertical Remarks: Frame construction of the legs made of Fe (see photos); calotte bolts of the legs missing; manhole diameter 450 mm Inner diameter: 1,990 mm Total height: 2,650 mm Agitator: agitator flange Support type: legs Location: Bremen Volume: 5,000 liters Product contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,650 mm Previous application: fruit juice industry TANK Bottom: dished bottom Number of legs: 3 pieces EQUIPMENT Manhole / dome: in top head Outlet: 50 mm Djdpexqc Tlofx Agfjur MATERIAL QUALITY Legs material: stainless steel AGITATOR 1 Agitator arrangement: eccentric in top head

Condition: used, Double Mitre Saw RAPID Type DGL 5000 / 500 In need of repair - control unit non-functional Year of manufacture: 1993 Cutting length: 5000 mm Shortest cut length: 350 mm Saw blade diameter: 500 mm - Control unit non-functional Space requirement (L x W x H): 7200 x 1700 x 1850 mm Weight: 1250 kg Dodpoyxy S Dofx Agfsur We are making space Affordable machine – ideal for export

Condition: used, cooking length 4.000 mm belt width 600 mm all stainless steel with electrical hoist Dedpfx Ajyy Nr Ajgfsur steam heated (steam generator not included) temperature distribution in 2 zones dimensions (l x w x h) : ± 5.000 x 1.550 x 2.200 mm adjustable speed

Condition: excellent (used), Year of construction: 2023, Laser Welding Robot Manufacturer: TRUMPF Model: TruLaser Weld 5000 (LR03) Year of construction: CW 51/2023 – Commissioned: 2024 4,000-watt solid-state (fiber) laser Dodjw U Ezzepfx Agfsur Operating hours: as new, used ADVANCED EQUIPMENT: 30 m LLK (laser light cable) TruDisk 4001 (solid-state, fiber) with 1 LLK-A, 1 unit, incl. chiller, incl. safety package for laser welding Workpiece Processing: Rotary module for shielding gas guidance FusionLine FusionLine combination nozzle Positioners: Rotary-tilt positioner with endless rotation Zero-point clamping system for rotary-tilt positioner Safety cabin extended to 4,800 x 4,800 mm (front x side) Data transmission: OPC UA for Machine Tools Basic (license may be required) EQUIPMENT: Machine: Collision protection KUKA Robot KR 70 Machine status indicator light Compressed air and shielding gas supply Machine designed for ambient temperatures up to 45°C Welding optics Perlator nozzle Welding optics BrightLine Scan Motorized focus adjustment Welding process visualizer Process gas at welding optics Linear nozzle Process gas and crossjet programmable Operation / Programming: KUKA smartPAD Production plan Touch panel with 21.5'' TFT color display Touchpoint user interface Data transfer: USB interface RJ-45 network interface Central Link Remote support interface Online update manager Safety: Work area monitoring Workpiece Processing: Forming gas Further Optional BASE EQUIPMENT: Automatic sliding door Compact dust extractor with 3,000 m³/h Support arm for operator panel Axis adjustment set Robot elevation (extended standard) Data usage agreement TECHNICAL DATA: Type: High Accuracy Robot Number of axes: 6 Rated payload: 70 kg Repeatability: +/- 0.05 mm Rotary-tilt positioner Max. working area: 2,000 x 1,000 mm x 1,200 mm Max. load: 500 kg Rotary table Max. working area: 2,350 mm (diameter) Max. working area (height): 1,150 mm Max. load (per side): 250 kg Rotary changer with turnover axis Max. working area (turnover drum diameter): 1,200 mm Max. working area (length): 2,600 mm Max. load (per side): 750 kg Turnover positioner Max. working area (turnover drum diameter): 2,000 mm Max. working area (length): 4,000 mm Max. load (per side): 1,000 kg Compact rotary changer with 3D clamping plate (rectangular) Max. working area (diameter): 3,000 mm Max. working area (height): 1,250 mm Max. load (per side): 600 kg Max. permissible mass moment of inertia: 600 kg*m² Rotary changer rotation range: +/- 180° Rotary changer rotation time (for 180°): 3.7 s Insert height: 830 mm Compact rotary changer with vertical rotary axes: Max. working area (diameter): 3,000 mm Max. working area (height): 1,250 mm Max. load (per side): 600 kg Max. permissible mass moment of inertia ring indexing table: 600 kg*m² Rotary changer rotation range: +/- 180° Rotary changer rotation time (for 180°): 3.7 s Vertical rotary axis rotation range: +/- 190° Max. permissible mass moment of inertia vertical rotary axis: 359 kg*m² Insert height: 885 mm Compliance with CE and EU Machinery Directive must be verified by the buyer upon recommissioning if applicable. Original price: over EUR 580,000 This used machine can be inspected under operating conditions. All information provided without guarantee – sale excludes all warranties and liability. Subject to prior sale.

Condition: used, all stainless steel electrically heated (= 300 kW) total power 313 kW nett belt length 5.000 mm nett belt width 650 mm frying time min/max : 20-250 sec throughput speed min/max 1,2-15 m/min min. oil volume at oil level of 2cm above the belt : ± 1.009 L max. oil level above the belt : 90 mm Dedpeyx Tl Refx Agfsur setting overheating protection : 220°C adjustable speed outfeed conveyor oil level control circulation pump sediment removal system filter lifting unit with electric hoists weight : 4.000 kg capacity : 3 x 400V, 50Hz

Condition: like new (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 050544, total width: 1,750 mm, total length: 3,350 mm, total height: 2,050 mm, empty load weight: 750 kg, input voltage: 400 V, Equipment: cooling unit, type plate available, Manufacturer: Milkplan Model: MPP-5000 Machine Type: Milk Cooling Tank Capacity: 5224 L Year of Manufacture: 2016 Refrigerant: R404A Construction: Stainless Steel Control System: Digital temperature control Certification: CE Applications Suitable for: Duodpfx Ajyxa N Aegfer Milk cooling Milk storage Dairy farms Milk collection centers Dairy processing plants

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Laser Machine Prima Power CV 5000 Duodjywwrfopfx Agfjr Year of Manufacture: 2016 3.1. CV SERIES CO₂ LASER SPECIFICATIONS (CV 5000) Average Power Output: 200 W – 5000 W Peak Power Output: Up to 6 kW Wavelength: 10.6 microns Beam Quality Factor (M²): < 2.4 (typically 2.1 to 2.3) Beam Divergence: 1.5 mrad (half angle) Beam Diameter at Exit: 15 mm 1/e², 21 mm full beam Pulsed Operation – Pulse Repetition Rate: 0 – 2 kHz Pulse Duration: 250 microseconds, 70 µs resolution Alignment Stability: +/- 150 µrad Operating Conditions: • Ambient temperature (max.): 40°C • Ambient temperature (min.): 10°C • Relative humidity: < 95% (non-condensing) Diode Laser: • Wavelength: 635 nm • Output Power: < 1 mW ——— 3.2. CV SERIES CO₂ LASER SUPPLY SPECIFICATIONS (CV 5000) Electrical: • Power requirement: 37 kW • Voltage: 400 VAC – 460 VAC ±10%, 3-phase Cooling: • Required cooling capacity: 45 kW • Flow rate: 133 L/min (35 GPM) • Inlet temperature: 18 – 20°C • Maximum inlet pressure: 6 bar • Nominal inlet pressure: 3 bar • Differential pressure: 1.5 bar • Coolant: Distilled water with 35% Dowfrost HD • Filtration requirement: 100 micron Gas: • Type / Purity / Gas mixture / Consumption: • He: 99.996% | 67.7% | 13.4 – 46.8 SLPH • CO₂: 99.995% | 4.1% | 0.9 – 3.0 SLPH • N₂: 99.996% | 28.2% | 5.8 – 20.2 SLPH • Total Consumption: 20 – 70 SLPH (variable) Additional Requirements: • < 10 ppm water vapor, hydrocarbons, and oxygen • Air: dry – dew point < 2°C • Depending on shutter utilization

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Laser Machine Prima Power CV 5000 Year of manufacture: 2016 3.1. CV SERIES CO₂ LASER SPECIFICATIONS (CV 5000) Average power: 200 W – 5000 W Peak power: Up to 6 kW Wavelength: 10.6 micrometers Beam quality factor (M²): < 2.4 (typically 2.1 to 2.3) Beam divergence: 1.5 mrad (half-angle) Output beam diameter: 15 mm 1/e², 21 mm full beam Pulsed operation – pulse repetition rate: 0 – 2 kHz Pulse width: 250 microseconds, 70 µs resolution Alignment stability: +/- 150 µrad Operating conditions: • Ambient temperature (max): 40 °C • Ambient temperature (min): 10 °C • Relative humidity: < 95% (non-condensing) Diode laser: • Wavelength: 635 nm • Output power: < 1 mW — 3.2. CV SERIES CO₂ LASER SUPPLY SPECIFICATIONS (CV 5000) Electrical: • Power consumption: 37 kW • Voltage: 400 VAC – 460 VAC ±10%, 3-phase Cooling: • Required cooling capacity: 45 kW Duedjywwq Uopfx Agfjr • Flow rate: 133 L/min (35 GPM) • Inlet temperature: 18 – 20 °C • Maximum inlet pressure: 6 bar • Nominal inlet pressure: 3 bar • Differential pressure: 1.5 bar • Coolant: Distilled water with 35% Dowfrost HD • Filtration requirement: 100 micron Gas: • Type / Purity / Gas mixture / Consumption: • He: 99.996% | 67.7% | 13.4 – 46.8 SLPH • CO₂: 99.995% | 4.1% | 0.9 – 3.0 SLPH • N₂: 99.996% | 28.2% | 5.8 – 20.2 SLPH • Total consumption: 20 – 70 SLPH (variable) Additional requirements: • < 10 ppm water vapor, hydrocarbons, and oxygen • Air: dry – dew point < 2 °C • Depending on shutter usage

Year of construction: 2006, condition: good (used), Make: WFL Austria Type: M 100 / 5000 Control: Siemen 840C Year: 2006 MillTurn M100: Complete & Complex machining Turning & Milling Equipped: ATC 108 double chain for milling tool holders ATC 10 positions boring bar holders up to 1000 mm SCHUNK 3 chuck THW 630 - 160R SMW Steady rest SLU-Z-5 50 - 310 mm Field off application: Aerospace Oil and Gas Energy Engineering Dodpfx Ajkvndtogfjur Crankshaft Hydraulic and Pneumtaics Specifications Metric US Standard Max. turning Ø 910 mm X-Axis 900 (+850 to -40) mm Y-Axis 500 (+300 to -200) mm Z-Axis 5370 mm B Axis 200 ° Spindle bore 165 mm Speedrange 1600 Rpm Spindle power 60 kW ATC / revolver 108 B-Axis Toolsystem Capto C8 B-Axis Speedranges 4000 Rpm B-Axis power 25 kW Chip conveyor Yes Pinole taper 6 Mk Stroke pinole 200 mm Quill Ø 180 mm Dimensions (Estimate) Length 14500 mm Width 4500 mm Height 3800 mm Weight 40000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 16501575, volume flow: 4,800 m³/h, input voltage: 380 V, power: 2.5 kW (3.40 HP), Equipment: type plate available, The resulting dirt particles, emulsion and oil mist, as well as smoke, are captured directly at the source and passed through the individual filtration stages. The separated liquid collects at the bottom of the unit and can be returned to the machining center via the siphon. In the first filtration stage, larger particles are retained by an aluminum pre-filter to protect the downstream high-performance fleece filters. The second filtration stage removes the majority of fine emulsion and oil mist. This stage consists of an aluminum frame equipped with a G4 filter mat and an F5 filter mat according to DIN 24185 / EN 779. The filter mats must be replaced depending on the degree of contamination. The third filtration stage consists of a large-area HEPA filter of class H13. A consistently high filtration efficiency of 99.95% at a particle size from 0.3μ DOP is ensured here. Type testing in accordance with DIN EN 1822-1 H13 allows the filtered air to be returned to the workspace. Dusdpfxeyz Sn Nj Agfjr

Condition: used, machine/vehicle number: LC596, Used complete line for still wine - 5000 BPHTechnical Specifications & Performance DataThis used bottling line is configured for glass bottle handling with a comprehensive sequence from filtration to case packing and palletizing. It is a second hand solution engineered for industrial packaging and beverage production, integrating well-known European manufacturers. The configuration covers rinsing, filling, capping (flush cork and aluminum), capsule application (heat-shrink and polylaminate), adhesive labeling, and end-of-line packaging.Container type: Glass bottlesCore monoblock: MBF Syncrofill 1200.25/1200.30LV/360.4SR/240.4AV/240 (rinsing–filling–capping)Filtering: Seitz Orion plate filtration groupBottle preparation: SICK Blancamat 8 bottle washer (pre-labeling)Capsule application: Nortan Prisma 40 (heat-shrink), Robino & Galandrino Astra 6 (polylaminate)Labeling: Cavagnino & Gatti CG E8-4-2NPS (3 stations: front/back/neck), Pago PAG.876 carton labelerConveying/accumulation: MBF accumulation table (conveyor)Case handling (option set 1): Bortolin & Kemo FOC 23 30 case erector, MA 88/1 divider inserter, IAM 2T AP case packer, MARA HM case sealer, PAC 2000 palletizerCase handling (option set 2): Mas Pack MAS 1200 case erector (400 Vac, 2 kW), Mas Pack Minipack 21/4 case packer (400 Vac, 6 kW), Mas Pack Seal 1200 case sealer, Mas Pack Exacta R Astride divider inserterAuxiliary equipment: PREO E0P051 4R2 hotmelt units, Ber PDC 30 carton scaleSelected component years: 2011 (Mas Pack MAS 1200, Seal 1200), 2015 (Mas Pack Minipack 21/4, Exacta R Astride), 2001 (Ber PDC 30)Certifications: CE markings on Mas Pack modulesAdvanced Automation & Control SystemsThe line combines automated capsule application, adhesive labeling with multi-station control, and end-of-line carton forming, gluing, and packing. Modules feature integrated safety circuits and CE-compliant controls. Hotmelt application is handled by PREO melters for reliable carton sealing. Quick adjustments across labeling stations and format handling enable efficient changeovers within glass bottle families.Adhesive labeling with 3-station control for front/back/neck labelsAutomated heat-shrink and polylaminate capsule applicationHotmelt application via PREO E0P051 4R2 unitsCE-compliant electrical panels on Mas Pack packaging modulesOperator-friendly HMI/controls at packaging stations (per module)Production Line Integration CapabilitiesDesigned for inline operation, the system integrates filtration, monoblock rinsing–filling–capping, labeling, and complete end-of-line packaging. The conveyorized accumulation table assists with buffer management for steady flow between wet and dry ends. The end-of-line can be configured with either Bortolin & Kemo or Mas Pack equipment to match site preferences and spare parts policy.Inline glass bottle processing from filtration to palletizingFo.. Dusdpoyhbhqsfx Agfer

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, overall weight: 13,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 30,000 W, number of axes: 4, General Data Machine weight 13000 kg Main Drive Number of axis 4 Spindle Speed 12000 RPM Spindle motor power 30 kW Tool taper BT 40 Movement X-Axis Movement 730 mm Z-Axis Movement 880 mm Y-Axis Movement 730 mm This 4-axis MORI SEIKI NH-5000 40 was manufactured in 2003, featuring a robust horizontal machining centre with a spindle speed up to 20,000 rpm and a power range of 22-30 kW. It includes a versatile tool magazine with a capacity up to 180 tools and a dual-pallet automatic changer to enhance productivity. Pallet size is 500 × 500 mm, supporting a maximum workpiece height of 1,000 mm. Consider the opportunity to buy this MORI SEIKI NH-5000 40 horizontal machining centre. Contact us for more information. Dsdpfsx Imt Tox Agfeur Application Types Milling

Condition: excellent (used), Year of construction: 2006, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 850 mm, workpiece length (max.): 1,000 mm, workpiece weight (max.): 500 kg, number of slots in tool magazine: 120, controller manufacturer: FANUC, total height: 3,138 mm, total length: 2,725 mm, total width: 4,610 mm, overall weight: 12,900 kg, controller model: FS-31IA (MAPPS III), feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, spindle speed (max.): 14,000 rpm, tool length: 500 mm, workpiece diameter (max.): 800 mm, CNC controller: FS-31IA (MAPPS III) Axes X-axis travel mm: 730 Y-axis travel mm: 730 Z-axis travel mm: 850 Rapid traverse m/min: 50 B-axis degrees: 360º (1º) Distance spindle nose - table surface mm: 100 – 830 Djdpfevw Sc Tjx Agfsur Acceleration in the axes m/s2: 9.8 (X), 10.8 (Y), 6.9 (Z) Worktable Number of pallets: 2 Table dimensions mm: 500X500 Maximum workpiece size (D x H) mm: 800 X 1000 Max. workpiece weight kg: 500 APC time s: 7 Spindle Spindle speed rpm: 14.000 Spindle drive power kW: 22/18.5 Tool holder: No.40 Spindle torque Nm: 220 Tool system Tool holder: BT-40 Tool magazine slots: 120 With free neighboring places mm: 140 With occupied neighboring places mm: 70 Max. Tool Length mm: 500 Max tool weight kg: 12 Tool-to-tool time s: 0,9 Chip-to-chip time s: 3,3 Equipment Chip conveyor Workarea light CE conformity Coolant gun TOOL LIFE MANAGEMENT Cooling Tank capacity: 680 Machine running times Rated power kVA: 49 Basic machine dimensions / weight Length mm: 2.725 Width mm: 4.610 Height mm: 3.138 Weight kg: 12.900

Year of construction: 2013, operating hours: 84,545 h, condition: ready for operation (used), General Data Machine weight 17500 kg Dusdpex D Nwwefx Agfjr Main Drive Punching force 220 kN This TRUMPF TRUPUNCH 5000 S10 was manufactured in 2013. It features a Siemens Sinumerik 840D control system, a working area of 3050x1550 mm, and a punching press of 220 kN. Capable of handling sheet weights up to 280 kg and thicknesses up to 8 mm, it includes a Linear ATC for 21 tools and additional options like MULTITOOL and ENGRAVING. Regularly maintained and in good condition. Contact us for more information about this machine. Application Types Punching

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 1,356 h, load capacity: 4,500 kg, lifting height: 5,000 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,500 mm, gearing type: hydrostat, fork carriage width: 1,250 mm, fork length: 1,250 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200X50-10, rear tire type: cushion tires (black), rear tire size: 250-15, overall weight: 11,440 kg, empty load weight: 6,940 kg, total height: 2,600 mm, total length: 2,500 mm, total width: 2,250 mm, color: orange, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, HUBTEX DQ45G – 2017 | 1365 hours | LPG | DUPLEX 5000 mm | FORK POSITIONER Ready for use from day one – no investment, no risk ✅ Why choose this forklift? Need a machine that won’t disrupt your workflow? ⚙️ This HUBTEX DQ45G is fully serviced and ready for immediate operation – no hidden costs. ✔️ Full service (oils, filters, complete inspection) ✔️ Condition: like new ✔️ Only 1365 operating hours ✔️ New tyres – no additional investment required Key Specifications 🔹 Capacity: 4,500 kg 🔹 Drive: LPG 🔹 Mast: Duplex – 5,000 mm 🔹 Fork positioner: 1,250 mm 🔹 Forks: 1,250 mm 🔹 Cabin: fully enclosed, heated Technical Data 🔹 Year: 2017 🔹 Hours: 1,365 🔹 Weight: 6,940 kg 🔹 Load centre: 600 mm Mast & Lifting 🔹 Duplex mast 🔹 Lifting height: 5,000 mm Dedpfxsyxhzyj Agfjur Dimensions 🔹 Height: 2,600 mm 🔹 Length: 2,500 mm 🔹 Width: 2,250 mm Chassis 🔹 Superelastic tyres (100%) – new Equipment 🔹 Heated full cabin 🔹 Fork positioner 🔹 Lighting Condition ✔️ Technical: 5/5 ✔️ Visual: like new Perfect for 🏭 Narrow aisles 🌲 Timber/steel industry 📦 Long loads 🌍 Indoor & outdoor applications What you receive ✔️ Fully tested machine ✔️ Ready for immediate use ✔️ Online demonstration available ✔️ Delivery to your location Delivery & Service 🚛 Europe-wide transport 📦 Comprehensive logistics support 💼 Leasing options available 🔧 After-sales support Why FT LOGISTICS? ✔️ 100+ machines in stock ✔️ In-house service team ✔️ Extensive European experience ✔️ Trusted by numerous clients FT LOGISTICS – Forklifts that get the job done.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 1,356 h, load capacity: 4,500 kg, lifting height: 5,000 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,500 mm, gearing type: hydrostat, fork carriage width: 1,250 mm, fork length: 1,250 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200X50-10, rear tire type: cushion tires (black), rear tire size: 250-15, overall weight: 11,440 kg, empty load weight: 6,940 kg, total height: 2,600 mm, total length: 2,500 mm, total width: 2,250 mm, color: orange, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, HUBTEX DQ45G – 2017 | 1365 hours | LPG | DUPLEX 5000 mm | FORK POSITIONER Ready for use from day one – no investment, no risk ✅ Why choose this forklift? Need a machine that won’t disrupt your workflow? ⚙️ This HUBTEX DQ45G is fully serviced and ready for immediate operation – no hidden costs. ✔️ Full service (oils, filters, complete inspection) ✔️ Condition: like new ✔️ Only 1365 operating hours ✔️ New tyres – no additional investment required Key Specifications 🔹 Capacity: 4,500 kg 🔹 Drive: LPG 🔹 Mast: Duplex – 5,000 mm 🔹 Fork positioner: 1,250 mm 🔹 Forks: 1,250 mm 🔹 Cabin: fully enclosed, heated Technical Data 🔹 Year: 2017 🔹 Hours: 1,365 🔹 Weight: 6,940 kg 🔹 Load centre: 600 mm Mast & Lifting 🔹 Duplex mast 🔹 Lifting height: 5,000 mm Dimensions 🔹 Height: 2,600 mm 🔹 Length: 2,500 mm 🔹 Width: 2,250 mm Chassis 🔹 Superelastic tyres (100%) – new Equipment 🔹 Heated full cabin 🔹 Fork positioner 🔹 Lighting Condition ✔️ Technical: 5/5 ✔️ Visual: like new Perfect for 🏭 Narrow aisles 🌲 Timber/steel industry 📦 Long loads Duedjyxhzmepfx Agfjr 🌍 Indoor & outdoor applications What you receive ✔️ Fully tested machine ✔️ Ready for immediate use ✔️ Online demonstration available ✔️ Delivery to your location Delivery & Service 🚛 Europe-wide transport 📦 Comprehensive logistics support 💼 Leasing options available 🔧 After-sales support Why FT LOGISTICS? ✔️ 100+ machines in stock ✔️ In-house service team ✔️ Extensive European experience ✔️ Trusted by numerous clients FT LOGISTICS – Forklifts that get the job done.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 1,356 h, load capacity: 4,500 kg, lifting height: 5,000 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,500 mm, gearing type: hydrostat, fork carriage width: 1,250 mm, fork length: 1,250 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200X50-10, rear tire type: cushion tires (black), rear tire size: 250-15, overall weight: 11,440 kg, empty load weight: 6,940 kg, total height: 2,600 mm, total length: 2,500 mm, total width: 2,250 mm, color: orange, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, HUBTEX DQ45G – 2017 | 1365 hours | LPG | DUPLEX 5000 mm | FORK POSITIONER Ready for use from day one – no investment, no risk ✅ Why choose this forklift? Need a machine that won’t disrupt your workflow? ⚙️ This HUBTEX DQ45G is fully serviced and ready for immediate operation – no hidden costs. ✔️ Full service (oils, filters, complete inspection) ✔️ Condition: like new ✔️ Only 1365 operating hours ✔️ New tyres – no additional investment required Key Specifications 🔹 Capacity: 4,500 kg 🔹 Drive: LPG 🔹 Mast: Duplex – 5,000 mm 🔹 Fork positioner: 1,250 mm 🔹 Forks: 1,250 mm 🔹 Cabin: fully enclosed, heated Technical Data 🔹 Year: 2017 🔹 Hours: 1,365 🔹 Weight: 6,940 kg 🔹 Load centre: 600 mm Mast & Lifting 🔹 Duplex mast 🔹 Lifting height: 5,000 mm Dimensions 🔹 Height: 2,600 mm 🔹 Length: 2,500 mm 🔹 Width: 2,250 mm Chassis 🔹 Superelastic tyres (100%) – new Equipment Djdjyxhzgspfx Agfeur 🔹 Heated full cabin 🔹 Fork positioner 🔹 Lighting Condition ✔️ Technical: 5/5 ✔️ Visual: like new Perfect for 🏭 Narrow aisles 🌲 Timber/steel industry 📦 Long loads 🌍 Indoor & outdoor applications What you receive ✔️ Fully tested machine ✔️ Ready for immediate use ✔️ Online demonstration available ✔️ Delivery to your location Delivery & Service 🚛 Europe-wide transport 📦 Comprehensive logistics support 💼 Leasing options available 🔧 After-sales support Why FT LOGISTICS? ✔️ 100+ machines in stock ✔️ In-house service team ✔️ Extensive European experience ✔️ Trusted by numerous clients FT LOGISTICS – Forklifts that get the job done.

Condition: excellent (used), Year of construction: 2019, Traverses X Y Z: 1524 x 596 x 584mm, Duodsyynvyspfx Agfor Table 1930 x 356mm, Spindle speed 5000rpm, Motor 5.75kW, ProtoTRAK SMX 3 axis control, ISO40 Spindle taper, 127mm Quill Travel, Interlocked guards, Power Drawbar, low Volt light.

Year of construction: 2017, condition: used, machine/vehicle number: AT102, Used Tetra pak Sterilizer UHT 5000 LPHTechnical Specifications & Performance DataThis UHT Sterilization System Steritherm is designed for high-throughput thermal processing of liquid foods and beverages, delivering consistent ultra-high-temperature treatment for aseptic downstream packaging. Manufactured by Tetra Pak engineering, the unit offers dependable performance for beverage production and industrial packaging environments where hygiene and reliability are critical.Manufacturer: Tetra PakModel: VTIS-C4 SterithermManufacturing year: 2017Process capacity: 5000 L/hSystem configuration: UHT system with homogenization, heat exchange, pump station, CIP regulator, and computer controlHomogenizer: SHL-20, max pressure 250 bar, capacity aligned to 5000 L/hPlate heat exchanger: H7-RC, volume 198 L, max working pressure 10 bar(g), max working temperature 140 °C, test pressure 13 bar(g)Pump station: sanitary centrifugal pumps including LKH-10 (2018) and LKH-107, plus NM038 monopumpRated operating envelope: high-temperature operation up to approximately 148 °C with vacuum and overpressure capability (application dependent)Electrical frequency: 50 HzAdvanced Automation & Control SystemsThe system includes an integrated computer control platform for precise process management. Automated temperature, flow, and holding-time control help ensure repeatable UHT performance across batches. A dedicated CIP regulator supports automated cleaning sequences, reducing downtime and enhancing food safety. The control interface facilitates recipe management, alarm handling, and trend visualization to support consistent quality and efficient operations.Computerized process control for UHT parametersAutomated CIP regulationProcess monitoring with configurable setpoints and alarmsDesigned for quick startup and stable thermal profilesProduction Line Integration CapabilitiesThis second hand UHT unit integrates seamlessly with upstream raw product handling and downstream aseptic tanks or fillers. It is suitable for standalone operation or as part of a used bottling line for beverage production. With a capacity of 5000 L/h, it supports medium-scale throughput and can be configured to match a range of product viscosities and process requirements.Inline or standalone operation modesInterfaces for feed, recirculation, and product dischargeCompatible with aseptic storage and filling systemsSuitable for dairy-based drinks, juice, and other liquid foodsMachine Condition & Maintenance HistoryThis is a second hand UHT system offered in working condition and ready for operation, reflecting an industrial design focused on long service life. The pump station includes a 2018 sanitary centrifugal pump as part of the configuration, indicating modernized components within the system. Overall, the unit presents as a robust processing asset for facilities seeking reliable thermal treatment without the lead ti... Dsdoyvincopfx Agfsur

Condition: used, Fan 2.2 kW, 5000 m³/h, exhaust fan, centrifugal fan, used machine Dodoypvclepfx Agfsur Manufacturer: B és S Ventilátor Type: FVFH 450/500 Overall dimensions: Width: 790 mm Depth: 730 mm Height:980 mm Year of manufacture: 2017 Airflow: 5000 m³/h Electrical data: 400 V, 2.2 kW, 4.7 A Pressure: 800 Pa