Used Climatic Test Chamber for sale (15,596)

Condition: excellent (used), Atlas Type: SC 350 MHG Atlas Solar Climatic Test Chamber, Air-Cooled For sale is an ATLAS SC-340 MHG SolarClimatic Test Chamber (climatic chamber with solar simulation via MHG lamp). The device is suitable for carrying out standardized weathering and aging tests under the combined influence of radiation, temperature, and climate. Features & Highlights: - Precise temperature and humidity control - Integrated humidification system with water reservoir - Cooling via water or air system (optional) - Feed-throughs available for measuring leads - Control via control panel or interfaces (RS232, etc.) - Sturdy test chamber floor, loadable up to 60 kg (optionally reinforced to 150 kg) General Data: Model: SC 340 MHG Test chamber volume: approx. 335 liters Cabinet weight: approx. 500 kg Irradiation unit weight: approx. 65 kg Technical Data: Test volume: 340 l (internal dimensions 580 × 765 × 750 mm) External dimensions (W×D×H): 865 × 1,595 × 2,180 mm Light source: 1 × 1,200 W MHG lamp Irradiance: 800–1,200 W/m² Illuminated area: approx. 3,300 cm² Weathering spectrum: 300–3,000 nm, compliant tests according to DIN 75220, IEC 60068-2-5, MIL-STD-810F Temperature range with irradiation: –20 °C to +100 °C (±1 K) Temperature range without irradiation: –30 °C to +100 °C (±0.1–0.5 K) Heating/Cooling rates: 3.0 K/min (heating), 2.5 K/min (cooling, without irradiation) Noise level: approx. 58 dB(A) at a distance of 1 m Dwsdpfxoziizmj Adroa Power supply: 400 V, 3/N/PE, 50 Hz Power consumption: max. 6.2 kW, 16 A Refrigerant: R-404A Weight: approx. 565 kg Information for your safety as a buyer! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers are subjected to a documented trial run. Condition: used Scope of delivery: (See picture) (Specifications and technical details subject to change and errors reserved!) Feel free to contact us by phone for any further questions.

Condition: excellent (used), CTS Climate Test Chamber Type: C -40/600, Air-Cooled (converted to R-452a refrigerant) Test chamber volume: 600 liters Temperature tests: - Temperature range: -40°C to +180°C - Temperature deviation: ±0.1 K / ±0.3 K over time (at stabilized condition) - Average temperature rate of change (without test load and radiant heat): - Heating: 2.5 K/min - Cooling: 3.0 K/min - Maximum radiant heat input: 2500 W at +20°C Climatic tests: - Climate range / Technical data: - Temperature range: +10°C to +95°C - Humidity range: 10% r.h. to 98% r.h. - Dew point range I: +7°C to +94°C - Dew point range II: –10°C to +7°C - Consistency values (over time): - Humidity consistency I: ±0.5% r.h. to ±1.5% r.h. - Humidity consistency II: ±1% r.h. to ±3% r.h. - Temperature consistency: ±0.1 K to ±0.3 K Chamber internal dimensions (approx.): Height: 850 mm, Width: 850 mm, Depth: 830 mm External dimensions (approx.): Height: 1900 mm, Width: 1115 mm, Depth: 1850 mm Refrigerant: R-452A Power connection: 400V 3/N 50Hz Connected load: 8.2 kW, Rated current: 11.9 A Weight: 550 kg Important information for your purchase! The following checks and procedures are performed on all our offered chambers prior to delivery: 1. Functional check and replacement of necessary components Dedpeziizgjfx Adrswa 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run Condition: used Scope of delivery: (see image) (Subject to changes and errors in the technical data and specifications!) If you have further questions, we will be happy to answer them by phone.

Year of construction: 2020, condition: excellent (used), Weiss Type: C/800/55a/25/S Year of manufacture: 2020 Weiss ClimeEvent Climate Test Chamber, Water-cooled Chamber volume: 800 liters Internal dimensions: Height 950 mm, Width 1100 mm, Depth 800 mm External dimensions: Height 2015 mm, Width 1415 mm, Depth 3156 mm Floor load capacity: designed for a maximum load of 250 kg Specifications for temperature testing: Temperature range: -55 to +180°C Temporal temperature fluctuation at chamber center: ±0.1 to ±0.5 K Spatial temperature deviation (temperature gradient): 0.5 to 2.0 K Heating rate: 25 K/min Cooling rate: 25 K/min (down to -45°C) Heating compensation: max. 8000 W Specifications for climate testing: Temperature range: +10 to +95°C Humidity range: 10 to 98% RH Climate performance data (excerpt) Humidity range: 10 to 98% relative humidity (RH) Humidity deviation (temporal): At chamber center, in steady-state condition, depending on climatic setting: ±1 to ±3% RH Temperature deviation (temporal): At chamber center, in steady-state condition, depending on temperature: ±0.1 to ±0.3 K Temperature uniformity (spatial): Relative to the setpoint (in the range > 20% RH): ±0.5 to ±1 K Operational data: LED strip: 24 V, 6.8 W / 2 x Halogen lamp 24 V, 50 W Rated voltage: 3/N / PE AC 400 V ± 10%, 50 Hz Rated power: 53 kW Rated current: 87 A Djdpfsziiypjx Adrewa Refrigerant: WT69-R449A Chamber is equipped with Greenmode Weight: approx. 2050 kg Buyer Safety Information! The following steps are performed on all chambers we offer: 1. Functional inspection and replacement of necessary components 2. Refill with legally compliant refrigerant if required 3. Leak test with certificate 4. Upon successful testing, chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and error!) For further questions, we are happy to answer your call.

Condition: excellent (used), Weiss Type: WK3-2200/40/5/V Weiss Climate Test Chamber, Water-Cooled Specifications for Temperature Testing: Temperature range: -40°C to +180°C Temperature change rates: Heating: 6.0 K/min Cooling: 11.5 K/min Temperature deviation: Temporal ± 0.8 K Spatial ± 2.0 K Heat compensation max. 8000 W Specifications for Climatic Testing: Temperature range: +10°C to +95°C Dew point temperature range: +4°C to +94°C with closed floor element Humidity range: 10 to 95% rH Temperature deviation (temporal): ± 0.3 K Humidity deviation (temporal): ± 3% rH Temperature uniformity: Spatial ± 1.0 K Heat compensation max.: 500 W Test chamber volume: 2,160 liters Test chamber dimensions: Height 1,115 mm, Width 1,400 mm, Depth 1,400 mm External dimensions (lowered): Height 2,318 mm, Width 1,860 mm, Depth 3,658 mm External dimensions above shaker: Height 2,710 mm External dimensions max. stroke height: 3,038 mm Exchangeable floor dimensions: Width 1,600 mm, Depth 1,504 mm Operating Data: Rated voltage: 3/N/PE AC 400V +10% 50Hz Rated power: 38.0 kW Dwsdpfxsziixro Adrja Rated current: 63.0 A Customer-side fuse: 80 A slow-blow Refrigerant: R 404A Weight: approx. 2,100 kg Important information for your safety as a buyer: The following points will be carried out on the chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with refrigerant compliant with legal regulations 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) We are happy to answer any further questions you may have by phone.

Condition: excellent (used), Weiss Type: WK3-340/70 Weiss Climate Test Chamber, Air-Cooled Control Panel: "Touch Panel" All control and operating commands can be initiated on the "Touch Panel" control panel by simply touching the function symbols. Adjustable Feet To compensate for uneven floors and to ensure adequate ventilation of the machine, the test chamber is equipped with adjustable feet. Feedthroughs Dsdpfoziiwuex Adrswa The test chamber is equipped with feedthroughs on the right and left sides. These allow measuring cables and testing equipment to be routed into the test chamber. Feedthroughs installed as standard: R1: 125 mm diameter L1: 85 mm diameter Volume: 335 liters Test chamber dimensions: Height: 750 mm, Width: 580 mm, Depth: 765 mm External dimensions: Height: 1775 mm, Width: 870 mm, Depth: 1600 mm Data for temperature tests: Minimum temperature: -72°C Maximum temperature: +180°C Temperature deviation, over time: ± 0.1 to ± 0.5 K Temperature homogeneity, spatially: ± 0.5 to ± 1.5 K Temperature change rate, cooling: 3 K/min Temperature change rate, heating: 3 K/min Data for climate tests: Temperature range: +10°C to +95°C Dew point range: -3°C to +94°C Humidity range: 10 to 98% RH Temperature deviation, over time: ± 0.1 to ± 0.3 K Temperature homogeneity, spatially: ± 0.5 to ± 1 K Humidity deviation, over time: ± 1 to ± 3% RH Data for operation: Test chamber lighting: Halogen bulb 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 16 A, Rated power: 4.9 kW Fuse: 16 A slow-blow (to be provided by the customer) Refrigerant: R-452A/R23 Weight: Approx. 585 kg For your security as a buyer, please note the following: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: excellent (used), We are offering a Weiss climate test chamber with humidity control! The chamber was serviced by Weiss/Vötsch as recently as December 2020. All tests were performed, and we conducted an additional test run on-site; humidity and temperature levels were verified using calibrated instruments. The chamber has undergone annual inspections and is in impeccable condition! The logbook is included. WEISS 1500SB/010JU/40DU Temperature range: -40°C to +180°C Humidity: 15% to 95% Climate operation: +10°C to +95°C Test chamber volume: 1,500 liters Internal dimensions: 1,490 mm deep, 1,100 mm wide, 945 mm high External dimensions: 2,470 mm wide, 2,000 mm high, 1,450 mm deep Dodpfx Aszn U A Todrewa Weight: approx. 1,100 kg Refrigerant: R404a (2.00 kg) The unit does not have feet and stands securely on a frame. Please feel free to contact us if you have any further questions!

Condition: excellent (used), Vötsch Type: VC 7018 Vötsch Climatic Test Chamber VC 7018 Water-Cooled Touch Panel Control Unit On the touch panel control unit, all control and operating commands can be triggered by simply touching the function symbols. Adjustable Feet To compensate for uneven floors and ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Ports The test chamber is equipped with port holes on the right and left sides. These allow measurement cables and test equipment to be routed into the test chamber. Feedthrough included in standard equipment R1: NW 125 mm L1: NW 50 mm Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Characteristics for temperature tests: Temperature range: -70°C to +180°C Djdpfx Ajzh Huhsdrjwa Temperature ±0.1 to ±0.5 K Spatial ±0.5 to ±2.0 K Temperature change rate according to IEC 60068-3-5 Heating: 4 K/min Cooling: 2.3 K/min Characteristics for climatic tests: Temperature range: -10°C to +95°C Humidity range: 10% to 98% r.h. F. Temperature deviation over time in the center of the usable space ± 0.1 to ± 0.3 K Temperature deviation over space ± 0.5 to ± 1.0 K Temperature gradient 1 to 2 K Humidity deviation over time in the center of the usable space ± 1 to ± 3 %RH Electrical connection: Nominal voltage: 3/N/PE AC 400V ±10 50Hz Nominal power: 5.9 kW Nominal current: 12.0 A Connection cable: 3.5 m Fuse protection: 16 A slow-blow, provided by the customer Refrigerants: R-404A and R-23 Test chamber capacity: approx. 190 liters Weight: approx. 460 kg net For your safety, the following information is provided as a buyer! The following steps are performed on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Weiss Type: WK-600/70 (I)-(II) 2 G EEx /22605147 Weiss Climate Chamber, Water-Cooled (Test chamber, explosion-proof) INERTIZATION WITH NITROGEN / EXPLOSION-PROOF TEST CHAMBER Technical Data: Test chamber designation: WK-600/70 (I)-(II) 2 G EEx External dimensions with hinges and door lock: Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door lock: Height 1995 mm, Width 1000 mm, Depth 1660 mm Test chamber volume: approx. 600 liters Cold/Heat operation: -70 to 180°C Climate operation: 10 – 95°C Humidity: 10...98 % RH Temperature change per unit of time: Cooling: approx. 2.5 K/min Heating: approx. 4 K/min 3/N/PE AC 400V ±10% 50Hz Rated power: 14 kW Rated current: 25 A Fuse (on customer's side): 32 A, slow-blow Permissible weight of test specimens: Total load of the shelf supports: 80 kg Test chamber floor: 80 kg, insert shelf: 40 kg Weight: 800 kg Refrigerant: R 404A/R 23 (Evaporator of the air conditioning system has been replaced) For your safety as a buyer, please note the following information! Dwodpfx Aezh D Ryjdrea The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Vötsch Type: VCS 7034-5 Water-cooled climate test chamber Test chamber volume: 335 liters Performance for temperature tests: Temperature range: -70 to +180°C Time-related temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 Rate of change: Cooling: 6.7 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration values: +23°C and +80°C Performance for climate tests: Temperature range: +10 to +95°C Time-related temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Time-related humidity deviation: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climate calibration values: +23°C / 50% RH and +95°C / 50% RH Test chamber dimensions: Width 580mm, Depth 765mm, Height 750mm External dimensions: Width 870mm, Depth 1595mm, Height 1775mm Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10kW Rated current: 21 A Djdezg Tx Ropfx Adrowa Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerant: R-404A / R-23 For your security as a buyer, please note the following: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions by telephone.

Condition: good (used), Vötsch Type: VCS 7034-5 Water-cooled climatic test chamber Vötsch VCS 7034-5 Test chamber capacity 335 liters Performance for temperature tests Temperature range -70 to +180°C Temperature deviation temporal K ±0.1 to ±0.5 Spatial temperature deviation K ±0.5 to ±2.0 Temperature gradient 1 to 4 Rate of change : Cooling 6.7 K/min Heating 6.8 K/min Heat compensation at +20 °C 3000 W / at -20°C 3000 W Temperature calibration values +23 °C and +80 °C Performance for climate tests Temperature range +10 to +95°C Temperature deviation in time ±0.1 to ±0.3 K Spatial temperature deviation ±0.5 to ±1.0 K Temperature gradient 1 to 2 K Humidity range 10 to 98% Humidity deviation in time ±1 to ±3% Dew point range -3 to +94°C Heat compensation 400W Climate calibration values +23 °C / 50 % r.h. and +95 °C / 50 % r.h. Test chamber dimensions: Width 580mm Depth 765mm Height 750mm External dimensions: Width 870mm Depth 1595mm Height 1775mm Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10kW Rated current: 21 A Sound pressure level: 64dB(A) Cooling water consumption: 1.4m³/h Djdezg Twgspfx Adrjwa Refrigerant: R-404A / R-23 Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Vötsch VC³ 0034 Climate Test Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: VC³ 0034 Machine Type: Climate Test Chamber / Climate Chamber Test Chamber Volume: approx. 335 liters For sale is a used climate test chamber from Vötsch for temperature and climate testing in laboratories, research, development, and quality assurance. Technical Data Test Chamber Dimensions: approx. 580 x 765 x 750 mm (W x D x H) Housing Dimensions: approx. 875 x 1860 x 1805 mm (W x D x H) Temperature Range: -10 °C to +90 °C Humidity Range: 10 to 98 % RH Dew Point Range: +4 °C to +89.5 °C Temperature Homogeneity: ±0.5 to ±1 K Temperature Deviation: ±0.1 to ±0.5 K Heating Rate: approx. 1 K/min Cooling Rate: approx. 0.3 K/min Max. Heat Compensation: approx. 200 W Refrigerant: R404A Filling Quantity: 0.6 kg ND max.: 25 bar g HD max.: 25 bar g Power Connection: 230 V / 50 Hz Rated Power: 2.3 kW Rated Current: 10 A Protection Class: IP54 Weight: approx. 490 kg Equipment Dwjdpfx Adjzgb Awsrea SIMPAC control system Temperature and humidity control Stainless steel test chamber Ethernet, USB, RS232, RS485/422 Test item protection function Cable glands Application Areas Climate testing Temperature testing Material testing Electronics testing Quality assurance Research and development Scope of Supply Vötsch VC³ 0034 Climate Test Chamber Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures For the safety of our customers, the offered climate chambers are tested before delivery, if necessary, filled with legally compliant refrigerant, subjected to a leak test, and delivered with a documented test run. Subject to change and errors in technical data as well as prior sale.

Condition: excellent (used), Here we offer a Weiss climate testing chamber. Weiss climate testing chamber, water-cooled (Refrigerant converted to R-452A) Temperature testing Volume 335 liters Test chamber dimensions: Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Minimum temperature -42°C Maximum temperature +180°C Temperature change rate, cooling 4 K/min Temperature change rate, heating 3.2 K/min Dwedpfx Adozgavvorja Temperature deviation, time-based ± 0.1 to ± 0.5 K Temperature homogeneity, spatially ± 0.5 to ± 1.5 K Climate testing: Temperature range +10°C to +95°C Dew point range -3°C to +94°C Humidity range 10 to 98% RH Temperature deviation, time-based ± 0.1 to ± 0.3 K Temperature homogeneity, spatially ± 0.5 to ± 1 K Humidity deviation, time-based ± 1 to ± 3 % RH Voltage: 3/N/PE AC 400V±10% 50Hz Rated power 4.1 kW Rated current: 14 A Refrigerant: R-452A Type: WK3-340/40 Weight Approx. 515 kg For your security as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), We are offering a Weiss climate testing chamber. Water-cooled. Test chamber lighting: halogen bulb 24V, 50W. Data for temperature tests: Temperature range: -40°C to +180°C. Temperature deviation over time in the center of the usable space: ± 0.3 to ± 0.8 K. Temperature deviation spatially: ± 0.5 to ± 2 K. Temperature change rate: Heating: 10 K/min. Cooling: 12.5 K/min. Heat compensation at +20°C: 8000 W. Heat compensation at -20°C: 3000 W. Data for climate tests: Temperature range: +10°C to +95°C. Humidity range: 10 to 98 % RH. Temperature deviation over time in the center of the usable space: ± 0.2 to ± 0.5 K. Temperature deviation spatially: ± 0.5 to ± 1 K. Humidity fluctuation over time in the center of the usable space: ± 1 to ± 3 % RH. Test chamber dimensions: height 950 mm, width 760 mm, depth 650 mm. External dimensions: height 2025 mm, width 1090 mm, depth 2480 mm. Rated voltage: 3/N/PE AC 400 V ± 10% 50 Hz. Rated current: 24 A. Rated power: 16.0 kW. Refrigerant: R452A. Weight: approx. 900 kg. Type: WK-480/40/10. For your security as a buyer, please note the following: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components. 2. If necessary, new filling with legally compliant refrigerant. 3. Leak test with certificate. 4. After successful inspection, the chambers undergo a documented test run. Condition: used. Scope of delivery: (See image). Dwsdpozgaipsfx Adroa (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), Here we offer a Weiss climate test chamber. Designation: SB2/500/80, water-cooled Cold-heat operation: -75°C ... +180°C Climate operation: +10...+95°C Humidity range: 10...98 % RH Temperature stability, over time: ± 0.2K Humidity stability: ±1 % RH Temperature change rate: Cooling: approx. 1.4 K/min Heating: approx. 2.5 K/min Dwedjzd Ultspfx Adrea External dimensions: Height 1980 mm, Width 1265 mm, Depth 1365 mm Connections: left side: ∅ 100 mm right side: ∅ 50 mm The connection voltage is: 400V/3Ph+N+PE/50 Hz Power: 10.4 kVA Weight: approx. 720 kg Refrigerant: R404a / R23 For your security as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Type: SB2/500/80 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Feutron Type: 3702/06 Water-cooled climate test chamber Technical data: Nominal volume of test chamber: 2.0 m³ Dimensions: Test chamber exterior, with humidifier console Width: 2970 mm, Height: 2370 mm, Depth: 1530 mm Rear wall Minimum insertion dimensions: Width: 2970 mm, Height: 2390 mm, Depth: 1550 mm Test chamber: Width: 2000 mm, Height: 1000 mm, Depth: 1000 mm Djdpfxozd Sdms Adrswa Door: double-leaf, clear opening width 2000 mm, height 1000 mm Viewing window, heated, 2 pieces, width 500 mm, height 600 mm Feed-through opening, 1 piece, left side wall, diameter 75 mm Temperature range: -40...100°C Climate range: 10...95°C Temperature difference, time-dependent ≤ ± 0.5...± 1.0 ΔN/K Rate of change measured in the supply air, without load Cooling up to 2.0 on average K/min Heating up to 2.0 on average K/min Humidity range: 10...95 % RH Humidity difference, time-dependent ≤ ± 3.0 % RH Dew point range, intermittently up to -5...95°C Refrigeration system: water-cooled, semi-hermetic Bitzer system Refrigerant: R507 (Μ-Κ1) Climate and dryer refrigeration system: air-cooled / hermetic system Refrigerant: R134a (Μ.ΚΚ) Power supply: Electrical connection: 400V 3/N/PE.AC, 50Hz Power plug: CEE 5-pin, 32 A, with 5.0 m cable Max. simultaneous power requirement: 10.0 kW Supply line fuse: 3x 25, Char, C A Protection class: IP20 Weight: 1300 kg Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer a Feutron climate test chamber. Feutron Climate Test Chamber Temperature Temperature range: -40...90°C Climatic range (without heat load): 10...85°C Temporal temperature deviation during temperature operation: ≤ ± 0.5 K/min Temporal temperature deviation during climatic operation: ± 1.0... ± 1.5 K/min Change rates Heating: avg. 2.0 K/min Cooling: avg. 2.0 K/min Standard IEC 1646 is achievable with testing, solar modules up to max. 160kg weight and nonlinear ramps (setpoint jump) Dedpozd Sdgofx Adrowa Drying Air drying: condensation drying Humidity Air humidification: steam humidification Humidity range: 10...95 % r.h. Temporal humidity deviation: ≤ ± 3.0... ±5.0 % r.h. Dew point range: 8...80.9°C Test Chamber Test chamber volume: 7.0 m³ Dimensions Internal dimensions: Width 1500 mm x Height 2250 mm x Depth 2000 mm Swing door DIN right, heated, Width 900 mm x Height 2100 mm Observation window, heated, with blackout shutter and lockable: Width 500 mm x Height 600 mm Feedthrough: 2x, right front side, Ø 75 mm Irradiation unit, test chamber Opening: 4x in left side wall for SC 2500, each 850 x 700 mm Irradiated area when using SC 2500: 1200 x 1200 mm Radiation intensity at 1.0 m wall distance: 1000 ± 10% W/m² Lighting: 1x halogen lamp, 200W Refrigeration system: Bitzer compressor, semi-hermetic, 2-stage, air cooled Condenser: split condenser (outdoor installation, winter control) Refrigerant: R507 / R23 Temperature control system Coolant medium Tyfocor / water Mixing ratio 50/50% Coolant density: 1.072 kg/dm³ Filling quantity: approx. 80 dm³ Pyranometer Temperature range: -40...150°C Max. radiation absorption: 4000 W/m² Spectral range (50% points): 305...2800 nm Sensitivity (nominal): 7 µV/W/m² Power supply, test chamber Mains connection: 400V, 3/N/PE, AC, 50Hz Connection type: hardwired Max. simultaneous power demand: approx. 32.0 kW Supply fuse: 3 x 63, Char C (A) Power supply, SolarConstant Mains connection: 400V, 3/N/PE, AC, 50Hz Connection type: Max. simultaneous power demand: approx. 30.0 kW Supply fuse: 3 x 63, Char C (A) Overall external dimensions of the test cell including: equipment room/control cabinet and control cabinet for SolarConstant 2500 External dimensions equipment room: Width 3440 mm x Height 2580 mm x Depth 2950 mm /control cabinet: Width 2200 mm x Height 1830 mm x Depth 1100 mm External dimensions condenser, split: Width 900 mm x Height 950 mm x Depth 2000 mm Weight test chamber (total): approx. 2700 kg Condenser empty weight: 153 kg Weight: 2700 kg Type: 3707/06 Condition: used Scope of delivery: (see picture) (Technical data and information are subject to change and errors!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), We offer a climate test chamber for sale. Air-cooled Test chamber nominal volume: 280 liters Dimensions: External dimensions of the test chamber: 1500 x 2040 x 1075 mm With fan motor and door removed: 1500 x 1940 x 925 mm Dsdpfx Adezd R T Tsrswa Test chamber: 720 x 690 x 560 mm Door, clear opening: 720 x 690 mm Viewing window, heated: 500 x 600 mm Temperature range: +5 to +100 °C Heating rate: 4.0 K/min Cooling rate: 0.6 K/min Climate range: +10 to +95 °C Humidity range: 10 to 95 % RH Humidity change rate: ≤ ± 3.0 Water connection for humidifier: Tap water or distilled water, 20-liter reservoir Power connection: 400 V 3/N/PE, AC, 50 Hz Maximum power consumption: 6.3 kW Weight: 500 kg Type: 3416/16 Refrigerant: R134a For your peace of mind as a buyer, please note the following: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated instruments. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Vötsch VC 4034 Climate Chamber / Temperature Chamber Description: For sale is a used climate and temperature chamber from the manufacturer Vötsch Industrietechnik. This unit is suitable for demanding temperature and climate tests in research, development, quality assurance, the electronics industry, automotive technology, as well as material and aging tests. The test chamber has been converted to the modern refrigerant R452A and features a user-friendly touch panel control. Thanks to the large test chamber volume of approximately 335 liters, the system is suitable for both individual test specimens and for extensive test setups. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VC 4034 Test chamber volume: approx. 335 liters Test chamber dimensions: approx. 580 x 765 x 750 mm (W x D x H) External dimensions: approx. 780 x 1758 x 1800 mm (W x D x H) Weight: approx. 515 kg Temperature range: -40 °C to +180 °C Temperature deviation over time: ±0.1 to ±0.5 K Temperature homogeneity spatially: ±0.5 to ±1.5 K Heating rate: approx. 3.2 K/min Cooling rate: approx. 3.5 K/min Climate operation: Temperature range: -40 °C to +180 °C Humidity range: 10 % to 98 % RH Temperature deviation over time: ±0.1 to ±0.3 K Temperature homogeneity spatially: ±0.5 to ±1.0 K Refrigerant: R452A Filling quantity: 2.5 kg GWP: 2141 CO₂ equivalent: 5.35 t ND max.: 22 bar(g) HD max.: 25 bar(g) Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 4.1 kW Rated current: 12.5 A Equipment: Touch panel control Programmable test sequences Stainless steel interior Viewing window in the door Test chamber lighting Air circulation system Side feedthrough for measuring cables Several stainless steel insert shelves Air-cooled refrigeration system Documentation available Application areas: Temperature testing Climate testing Material testing Electronics testing Aging tests Environmental simulation Quality assurance Research and development Automotive testing Dwjdpfxszd Dm Hj Adroa Condition: Used Optical condition as shown in the pictures. Maintenance and calibration stickers are present. Refrigeration circuit converted to R452A. Scope of supply: 1x Vötsch VC 4034 Climate Chamber Stainless steel insert shelves Touch panel control unit Documentation / Documents Accessories as shown in the pictures Subject to changes and errors in the technical data. Subject to prior sale.

Condition: excellent (used), Memmert GmbH Climate Testing Chamber / Temperature Testing Chamber Used Memmert climate testing chamber, type CTC 256, for temperature and climate testing. This unit is suitable for environmental simulation, material testing, quality assurance, research and development, as well as stress and aging tests. Technical data: Manufacturer: Memmert GmbH + Co. KG Type: CTC 256 Test chamber volume: approx. 256 liters Test chamber dimensions: approx. 640 x 597 x 670 mm (W x D x H) Housing dimensions: approx. 898 x 1100 x 1730 mm (W x D x H) Weight: approx. 320 kg Temperature range: -42 °C to +190 °C Heating rate: approx. 3.35 K/min Cooling rate: approx. 2.8 K/min Humidity function available Refrigerant: R404A Rated cooling capacity: 2.53 kW Max. operating overpressure: 30 bar Mains connection: 3/N/PE AC 400 V / 50 Hz Rated power: approx. 7.0 kW Rated current: approx. 10.6 A Equipment Programmable controller Viewing window Stainless steel interior Air circulation system Ethernet interface Printer connection Alarm contact 230 V service socket Shelf insert Dodpfx Aozd Dchjdrswa Documentation available Scope of delivery Memmert CTC 256 climate testing chamber Shelf insert Water canister Documentation / test report Accessories as shown in the pictures Condition Used, optical condition according to the pictures. (Changes and errors in the technical data are subject to change!) Subject to prior sale.

Condition: excellent (used), Binder MKFT 720 E3.2 Temperature and Humidity Chamber Device Data Manufacturer: Binder Type: MKFT 720 E3.2 Year of Construction: 2017 Article Number: 9020-0288 Design: Temperature and Humidity Chamber Cooling: Air-cooled Description Used temperature and humidity chamber from Binder. Suitable for temperature, climate, material, and aging tests, as well as stress tests. Application in industry, research, development, and quality assurance. Technical Data Temperature range: -70 °C to +180 °C Humidity range: 10 % to 98 % RH Internal volume: approx. 734 liters Max. total load: 160 kg Max. load per shelf: 40 kg Dimensions External (W x H x D): 1615 x 2005 x 1230 mm Internal (W x H x D): 1200 x 1020 x 600 mm Electrical Data 400 V / 3N~ / 50 Hz Power: 13.0 kW Current: 22.5 A Protection class: IP 20 Refrigeration System Refrigerant: R404A / R23 Stage 1: 4.00 kg Dwsdpfjy H H Smjx Adrsa Stage 2: 0.87 kg Two-stage refrigeration system Max. operating pressure: 29 bar Performance Data Temperature Temperature deviation over time: 0.1 to 0.5 K Temperature deviation spatially: 0.3 to 2.0 K Heating rate: approx. 4.8 K/min Cooling rate: approx. 4.0 K/min Heat compensation: approx. 5000 W Performance Data Climate Climate range: +10 °C to +95 °C Humidity range: 10 % to 98 % RH Temperature deviation: 0.1 to 1.0 K Heat compensation: approx. 800 W Equipment Touch control panel Program and constant operation Observation window Stainless steel test chamber Internal lighting Cable entry Movable on rollers Robust industrial design Weight approx. 635 kg Scope of Supply Binder MKFT 720 E3.2 Temperature and Humidity Chamber Scope of supply as shown in the pictures Functional testing Refrigerant service Leak test Test run with protocol Condition: Used. Condition: See pictures. Inspection possible by arrangement. Loading and transport can be organized upon request. Subject to changes and prior sale. If you have any questions, please do not hesitate to contact us.

Condition: excellent (used), RS-Simulators Climate Chamber KSS 600/75-10K Device Data Dwodpjy H Ib Ajfx Adroa Manufacturer: RS-Simulators Prüf- und Messtechnik GmbH Type: KSS 600/75-10K Design: Climate test chamber / Environmental simulation chamber Cooling: Water-cooled Description Used climate test chamber from RS-Simulators. Suitable for temperature tests, climate tests, material and aging tests. Application in industrial testing and measurement. Technical Data Temperature range: -75 °C to +180 °C Temperature change: Heating/cooling approx. 10 K/min Test chamber volume: approx. 600 liters Dimensions Internal (W x D x H): 840 x 840 x 840 mm External (W x D x H): 1200 x 1600 x 1995 mm Electrical Data 400 V / 3~ / N / PE Current consumption: approx. 55 A Refrigeration System Refrigerant: R404A / R23 R404A: 6.0 kg R23: 3.0 kg Weight approx. 1400 kg Equipment RS-Simulators control panel / operating panel Program operation Observation window Temperature monitoring in the test chamber Operating hour counter Side feed-through Robust industrial design Scope of delivery RS-Simulators climate chamber KSS 600/75-10K Scope of delivery as shown in the pictures Functional test Refrigerant service Leak test Condition: Used. Condition: See pictures. Inspection possible by arrangement. Loading and transport can be organized upon request. Subject to changes and prior sale. If you have any questions, please do not hesitate to contact us.

Condition: used, Year of construction: 1980, functionality: unexamined, machine/vehicle number: GTTS 220, total height: 144 mm, total length: 135 mm, total width: 96 mm, Equipment: documentation/manual, Used Votsch/Weiss GTTS 220 Climate Chamber Manufacturer: Votsch/Weiss Model: GTTS 220 | 20 External dimensions: 135cm x 96cm x 144cm (length x width x height) Max internal dimensions: 65cm x 92cm x 54/40cm (width x depth x height) Voltage: 220/380 V Refrigerant type: R12 Includes manual (installation and operation handbook) Dedpfjx H N Drsx Adrewa

Year of construction: 2019, condition: defective spare-parts repository (used), functionality: not functional, Important note regarding the item's condition: Please read carefully before purchasing: This item comes from a business closure or warehouse liquidation. We were unable to test the device for functionality, and therefore it is explicitly sold as UNTESTED, DEFECTIVE, and NON-FUNCTIONAL. It is intended solely for hobbyists, technicians for repair purposes, or as a source of spare parts. The sale is made with the exclusion of any warranty regarding functionality or completeness. Dwjdpszcxbwsfx Adrsa Product description: Offered is an industrial climate testing chamber / temperature and humidity testing chamber from the manufacturer SHENGS (Shanghai Shengs Electronic Technology Co., Ltd.). Devices of this type are generally used for material tests, aging simulations, or electronic component tests under defined temperature and humidity conditions. Features & visual characteristics (according to the images): • Interior: High-quality stainless steel interior, easy to clean. Includes a solid, perforated insert (grid). • Connections & access: Side cable entry (port) with a plug for passing through sensors or power cables for the test item. • Technical area: Easily accessible technical compartment on the side (electronics, contactors, relays, fan motors, and a stainless steel water tank for the humidification unit are installed). • Mobility: The heavy device is mounted on four stable swivel casters and can therefore be easily positioned at the place of use. • Other: Manometer on the outside, drain/supply hose in the lower area. Technical data (according to the nameplate): • Manufacturer: Shanghai Shengs Electronic Technology Co., Ltd. • Model: STH-2P-C (handwritten) • Year of manufacture / Date: 14.08.2019 • Serial number: SS-SC19011 • Power supply: 1 phase, 220V AC • Current consumption: 30A Visual condition: The device shows signs of wear and tear due to age and use (scratches, slight dirt, discoloration). A side panel for the technical area seems to be missing or was removed for the photos (please check the pictures carefully). The seals on the interior appear to be intact. All internal components shown in the pictures (circuit boards, cables, water tank) are included in the scope of delivery, but no guarantee is given regarding their functionality or completeness. Scope of delivery: • 1x SHENGS STH-2P-C climate testing chamber (as shown in the photos) • 1x Grid (already installed in the interior) • No other accessories, no manuals, or test reports are included. Shipping and pickup information: Due to its size and weight, regular parcel shipping is not possible. • Pickup: Pickup by the buyer is preferred (Please bring a suitable transport vehicle and possibly helpers/pallet truck). • Shipping via freight forwarder: Can be arranged on request and at the buyer's expense (buyer arranges shipping or freight costs are charged separately).

Year of construction: 2011, condition: excellent (used), functionality: fully functional, For sale is a climate test chamber KPK 200. The unit is in very good condition and ready for immediate use. Technical data: Year of manufacture: 2011 Test chamber nominal volume: 280 dm³ External dimensions of chamber: 1500 x 2040 x 1075 mm Minimum installation dimensions: 2060 x 1095 mm With fan motor and door removed: 1500 x 1940 x 925 mm Test space: 720 x 690 x 560 mm Door, clear opening: 720 x 690 mm Viewing window, heated: 500 x 600 mm Number of shelves: 3 units Maximum permissible load: 90 kg, evenly distributed across 3 shelves Dwsdpey E Ilxofx Adrea Maximum load per shelf: 30 kg Test chamber material: Stainless steel Wst.-Nr. 1.4301

Condition: used, ETS MPA102/L620M Shaker Vibration Testing & Horstmann HS 220 Climate Test Chamber System Vibration Testing System: ETS MPA102/L620M Sine Force: 600 kgf Random Force: 600 kgf Shock Force (6 ms, half sine): 1,200 kgf Max. Sine Velocity: 2 m/s Max. Sine Acceleration: 981 m/s² Armature Diameter: 200 mm First Resonance Frequency: 3,300 Hz Dwjdpfx Adjy Sl Uqorja Dimensions: 943 x 633 x 770 mm Shaker Weight: 730 kg Amplifier Unit: 6 kVA Blower Unit: HP-2 / 4 kW Climate Chamber: Horstmann HS220 Test Chamber Volume: 220 liters Test Chamber Dimensions: 600 x 600 x 600 mm (H x W x D) Temperature Range: -40 to +180 °C Cooling Rate: 2 K/min 3 K/min Heating Rate: 3 K/min 3 K/min Electrical Connection: 400V, 3/N, 50 Hz / 5 kW External Dimensions: 1,630 x 1,700 x 1,200 mm (H x W x D) Used item as shown in the pictures. Shipping: The specified shipping costs apply to deliveries within Germany. Worldwide shipping available (please inquire for shipping costs outside Germany). The given shipping costs apply to shipping within Germany. Sale only to commercial customers. No warranty or guarantee. Deviations from the technical data as well as errors in the article description are possible and subject to change.