Used Climatic Test Chamber for sale (16,390)

Condition: used, Weiss Type: WK3-2200/40/5/V Weiss Climate Chamber, Water-Cooled Data for temperature tests: Temperature range: -40°C to +180°C Temperature change rate: Heating: 6.0 K/min Cooling: 11.5 K/min Temperature deviation: Temporal: ± 0.8 K Spatial: ± 2.0 K Maximum heat compensation: 8000 W Data for climate tests: Temperature range: +10 to +95°C Dew point temperature range: +4 to +94°C with closed bottom element Humidity range: 10 to 95% RH Temperature deviation (temporal): ± 0.3 K Humidity deviation (temporal): ± 3% RH Temperature homogeneity: Spatial: ± 1.0 K Maximum heat compensation: 500 W Test chamber volume: 2160 liters Test chamber dimensions: Height: 1115 mm, Width: 1400 mm, Depth: 1400 mm External dimensions (lowered): Height: 2318 mm, Width: 1860 mm, Depth: 3658 mm External dimensions (above shaker): Height: 2710 mm External dimensions (maximum stroke height): 3038 mm Dimensions of interchangeable floor: Width: 1600 mm, Depth: 1504 mm Data for operation: Rated voltage: 3/N/PE AC 400V, 10%, 50Hz Rated power: 38.0 kW Rated current: 63.0 A Customer-side fuse protection: 80 A, slow-blow Bedeziixrepfx Akneww Refrigerant: R 404A Weight: approx. 2100 kg For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components. 2. If necessary, refilling with legally compliant refrigerant. 3. Leak test with certificate. 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, CTS Type: CS-70/900 CTS climate testing chamber with Feuchet water cooling (converted to R-452a) Temperature range: -70 °C to +180 °C Humidity range: 10–98 % RH Test chamber dimensions: Height approx. 870 mm / Width approx. 1000 mm / Depth approx. 1000 mm External dimensions: Height approx. 1950 mm / Width approx. 1200 mm / Depth approx. 2220 mm Control cabinet dimensions: Height approx. 2100 mm / Width approx. 800 mm / Depth approx. 400 mm Test chamber volume: 900 liters Refrigerant: R-452a / R23 Electrical connection: 400 V +6/-10%, 3/N, 50 Hz Connected load: 21.2 kW, rated current: 35.7 A Climate testing chamber weight: 900 kg Control cabinet weight: 150 kg For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) Bodpfx Asziiztoknjww (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Vötsch Type: VC³ 4018/S Vötsch VC³ 4018/S Climate Test Chamber, Li-Ion, CO/CO₂ -42 to +150 °C, 400 V, Air-cooled For sale is a temperature and climate test chamber from the renowned German manufacturer Vötsch Industrietechnik GmbH, type VC³ 4018/S, manufactured in 2012. The unit is specifically equipped for testing lithium-ion batteries and features CO monitoring and CO₂ inertization to enhance operational safety. Important Note: Due to this safety equipment, the test chamber is software-limited to a temperature range of -42 °C to +150 °C. The chamber is ideally suited for: Li-Ion battery tests Electronics and component testing Temperature and climate stress tests Development and quality assurance tasks Technical Data: Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 870 mm x Depth 1550 mm x Height 1800 mm Bwodpjzimfvsfx Aknjw Test chamber volume: 190 liters Feedthrough installed as standard equipment R1: ® 125 mm L1: © 50 mm Data for temperature tests: Temperature range: -42 °C to +150 °C Temperature deviation over time: ± 0.1 to ± 0.5 K Temperature homogeneity in space: ± 0.5 to ± 1.5 K Temperature change rate Heating: 4 K/min Cooling: 4 K/min Max. heat compensation: 2300 W Data for climate tests: Temperature range: +10 to +95 °C Dew point range: -3 to +94 °C Humidity range: 10 to 98 % RH Temperature deviation over time: ± 0.1 to ± 0.3 K Temperature homogeneity in space: ± 0.5 to ± K Humidity deviation over time: ± 1 to ± 3 % RH Heat compensation: 400 W Data for operation: Test chamber lighting: Halogen bulb 2 x 24V, 50W 3/N/PE AC 400V ± 10% 50 Hz Rated power: 4.1 kW Rated current: 14 A Refrigerant: R-404A Weight: 470 kg For your safety as a buyer, please note the following information: The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss   Type: WK3-340/40   Weiss Climate Test Chamber, Air-Cooled   Temperature Testing   Volume: 335 liters   Test Chamber Dimensions:   Test Chamber Dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External Dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm   Minimum Temperature -42°C Maximum Temperature +180°C   Temperature Change Rate, Cooling 4 K/min Temperature Change Rate, Heating 3.2 K/min   Temperature Deviation, Over Time ± 0.1 to ± 0.5 K Temperature Homogeneity, Spatially ± 0.5 to ±1.5 K   Climate Testing:   Temperature Range +10°C to +95°C Dew Point Range -3°C to +94°C Humidity Range 10 to 98% RH   Temperature Deviation, Over Time ± 0.1 to ± 0.3 K Temperature Homogeneity, Spatially ± 0.5 to ± 1 K Humidity Deviation, Over Time ± 1 to ± 3 % RH   Halogen Bulb 2 x 24V, 50W Voltage: 3/N/PE AC 400V ±10% 50Hz Rated Power 4.1 kW Rated Current: 14 A   Refrigerant: R-404A Weight: approx. 515 kg   For your peace of mind as a buyer, please note the following information!   Bwodpfeziyygsx Aknew The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of supply: (See image)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss Type: EmissionEvent VOC/240 Weiss Technik EmissionEvent VOC/240 Industrial emission test chamber / VOC test chamber / climate test chamber Water-cooled For sale is a professional emission test chamber: Weiss Technik EmissionEvent VOC/240 (year of manufacture 2018) from an industrial laboratory and testing facility. The device is used to perform emission tests in accordance with standards under precisely controlled temperature, climate and process conditions and is designed for continuous use in laboratories, industry and quality assurance. What does VOC mean / What does the device do? VOC = Volatile Organic Compounds The device measures and tests the outgassing (emission) of materials under defined conditions. This involves examining which substances a material releases into the air. Typical applications: Emission testing of plastics, components, materials Automotive interior material tests (odor / pollutants) Building products & furniture emissions Packaging, textiles, adhesives, paints Quality control and standard tests (e.g. ISO / VDA / DIN) The test system generates precisely defined temperature, humidity and air conditions. Emissions are passed from the test chamber via a carrier gas (e.g. nitrogen or air) and can then be measured with analysis devices. Device function / features: Stainless steel emission test chamber (hermetically sealed) Temperature and climate control Carrier gas system for emission measurements Automatic process control with touch panel Program operation / continuous operation possible Sampling connections for VOC analysis Industrial design (laboratory & continuous operation) Data for temperature tests: Bwjdoziyz Ropfx Aknsw Temperature range +20 to +130 °C Temporal temperature deviation in the center of the usable space ± 0.1 to ± 0.3 K Spatial temperature homogeneity ± 0.1 to ± 0.5 K Temperature change rate (according to IEC 60068-3-5) Heating 0.4 K/min Cooling 0.3 K/min Temperature change rate (on average, with increased heating and cooling capacity) Heating up to +65 °C 1.5 K/min Cooling from +65 °C to +20 °C 1.3 K/min Data for climate tests: Temperature range +20 to +130 °C Dew point range +5 to +60 °C Humidity range 5 to 95 % RH Temporal temperature deviation 0.1 to 0.3 K Temporal humidity deviation -3 to 3 % RH Dimensions EmissionEvent VOC/240 External dimensions (device) Width: approx. 1350 mm, Depth: approx. 2500 mm, Height: approx. 1985 (2190) mm Internal dimensions (test chamber) Emission test chamber: 200 l Test chamber gross: 240 l Test chamber net: 208 l Max. test specimen: 80 kg Internal dimension VOC/240 Width: approx. 600 mm, Depth: approx. 560 mm, Height: approx. 600 mm Electrical: Voltage: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 12.1 kW Rated current: 30 A Protection class: IP54 Refrigerant R134a – 2.5 kg Weight: approx. 1080 kg For your security as a buyer, the following information! The following points will be carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are subject to change!) We will be happy to answer any further questions for you by telephone.

Condition: used, Vötsch Type: VCS 7034-5 Water-cooled climate test chamber Test chamber volume: 335 liters Performance for temperature tests Temperature range: -70 to +180°C Time-based temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 Rate of change: Cooling: 3.5 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration values: +23°C and +80°C Performance for climate tests Bedpfx Akozizl Dsneww Temperature range: +10 to +95°C Time-based temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Time-based humidity deviation: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climate calibration values: +23°C / 50% RH and +95°C / 50% RH Test chamber dimensions: Width 580mm, Depth 765mm, Height 750mm External dimensions: Width 870mm, Depth 1595mm, Height 1775mm 1 Feedthrough, approx. 50 mm diameter, left 2 Feedthrough, approx. 125 mm diameter, left 1 Feedthrough, approx. 125 mm diameter, right Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10 kW Rated current: 21 A Sound pressure level: 64dB(A) Cooling water consumption: 1.4 m³/h Refrigerant: R404A / R-23 For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We are happy to answer any further questions you may have by phone.

Condition: used, CTS   CTS CW‑60/5.5 – Water-Cooled Climate Test Chamber   The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber for conducting temperature and humidity tests on multiple test specimens simultaneously.   Device Description The climate test chamber can be used to test the function or material properties of a test specimen under temperature and humidity conditions. The good air circulation, with a correspondingly high volume of recirculated air, guarantees good transfer to the test specimen. The air handling unit is located at the rear of the interior. The units are located behind the device in a separate frame and are easily accessible. The control system is housed in a separate control cabinet. The control panel is integrated into the control cabinet door. To dehumidify the test chamber, the chamber is equipped with a self-regenerating compressed air dryer. The test chamber can be purged with fresh air via a fan.   Technical Performance Data:   Temperature Tests: Temperature range -60 °C to +100 °C Temperature deviation ±0.5 to 1 K over time Temperature change rate, linear with test specimen and with heat radiation, measured in the supply air Bsdpfozizmbex Akneww Heating: 2 K/min from -40 °C to +85 °C Cooling: 2 K/min from +85 °C to -40 °C   Climate Tests:   Temperature range +10 °C to +90 °C Humidity range 10 % to 95 % relative humidity in the dew point range +5°C to +89 °C Temperature deviation ± 0.5 K over time Humidity deviation ±1 - ±3 % r.h. over time   The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiation, and without additional equipment.   Dimensions: Internal dimensions (test chamber / usable space): Volume: approx. 5,500 liters (5.5 m³)   Internal dimensions (approx.): Height: 2300 mm Width: 1600 mm Depth: 1550 mm External dimensions: Height: 2800 mm Width: 2250 mm Depth: 5000 mm   Operating Data:   Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz Rated power: 58.3 kW (incl. 5 sockets) Rated current: 86.0 A Protection class IP 54   Technical Design:   Refrigeration unit water-cooled, low-noise, semi-hermetic, stepless power adjustment through electronic monitoring and control system, environmentally friendly refrigerant R 23 / R 404 A   Notes   Inspection possible by arrangement (46325 Borken)   Shipping by freight forwarder possible – costs & organization on request   Scope of supply: (See picture)   (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have by phone.

Condition: used, ESPEC Temperature Shock Chamber ESPEC TSA-72EL-A Temperature Shock Chamber Water-cooled For sale is a used ESPEC temperature shock chamber, model TSA-72EL-A from the manufacturer ESPEC CORP. This chamber is suitable for temperature shock tests, temperature cycling tests, material testing, electronics testing, automotive applications, quality assurance, and research and development. Technical Data Manufacturer: ESPEC CORP. Model: TSA-72EL-A Type of equipment: Temperature Shock Chamber System: 2-zone testing with damper switching Design: Air-cooled Test chamber volume: approx. 72 liters Internal dimensions of test chamber (W × H × D): 410 × 460 × 370 mm External dimensions (W × H × D): 1310 × 1900 × 1470 mm Weight: approx. 900 kg Temperature range, hot chamber: +50 °C to +200 °C Temperature range, cold chamber: -65 °C to 0 °C Temperature stability: ±0.5 °C Preheating temperature: up to +205 °C Pre-cooling temperature: up to -75 °C Heating time: from ambient temperature to +200 °C within approx. 15 minutes Cooling time: from ambient temperature to -70 °C within approx. 40 minutes Temperature recovery condition: +125 °C / 30 min. to -40 °C / 30 min. Temperature recovery time: within approx. 5 minutes Max. test chamber load: 30 kg evenly distributed Cable entry: Ø approx. 50 mm Compressed air supply: 0.4 to 0.7 MPa / 4 to 7 bar Refrigerant, high-temperature side: R404A Refrigerant, low-temperature side: R23 Power supply: AC 400 V / 3 phases / 50 Hz Max. current consumption: 45 A Features Color touchscreen control TFT color LCD, 10.4 inches PID temperature control Program memory Trend graphics Alarm history Eco mode Automatic defrost RS-485 interface Bedpjzhkfqjfx Aknjww Over-temperature / under-temperature protection Vertical sliding door Stainless steel test chamber Mechanical cascade refrigeration system Electronic expansion valve Sirocco circulating air fan Damper drive via air cylinder 2 stainless steel test inserts Cable entry, Ø approx. 50 mm Application areas Temperature shock testing Temperature cycling testing Electronics testing Semiconductor testing Automotive Component testing Material testing Quality assurance Research and development Condition Used Optical condition as shown in the images Scope of delivery 1x ESPEC TSA-72EL-A Temperature Shock Chamber 2x Stainless steel test inserts Accessories as shown in the images Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Inspection possible by appointment. Forklift available for loading. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, Vötsch Type: VCS 7034-5 Water-cooled climate testing chamber Vötsch VCS 7034-5 Test chamber volume: 335 liters Performance for temperature tests Temperature range: -70 to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 Rate of change: Cooling: 6.7 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration values: +23°C and +80°C Performance for climate tests Temperature range: +10 to +95°C Temporal temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Temporal humidity deviation: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climate calibration values: +23°C / 50% RH and +95°C / 50% RH Test chamber dimensions: Width 580mm, Depth 765mm, Height 750mm External dimensions: Width 870mm, Depth 1595mm, Height 1775mm Electrical connection: 3/N/PE AC, 400 V ±10%, 50 Hz Rated power: 10 kW Rated current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerant: R-404A / R-23 For your safety as a buyer, please note the following information! The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components Bwjdpfjzg Twgex Aknjw 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Vötsch Bsdpfozg Tx Rjx Aknsww Type: VCS 7034-5 Water-cooled climate testing chamber Vötsch VCS 7034-5 Test chamber volume: 335 liters Performance for temperature tests Temperature range: -70 to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 Rate of change: Cooling: 6.7 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration values: +23°C and +80°C Performance for climate tests Temperature range: +10 to +95°C Temporal temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Temporal humidity deviation: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climate calibration values: +23°C / 50% RH and +95°C / 50% RH Test chamber dimensions: Width 580mm, Depth 765mm, Height 750mm External dimensions: Width 870mm, Depth 1595mm, Height 1775mm Electrical connection: 3/N/PE AC, 400 V ±10%, 50 Hz Rated power: 10 kW Rated current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerant: R-404A / R-23 For your safety as a buyer, please note the following information! The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, CTS Type: C-40/350 Air-cooled climate testing chamber For sale is a professional CTS climate testing chamber, model C-40/350. This unit is designed for demanding environmental simulations in industry and is ideal for material testing, electronics, automotive, aerospace, and research. Temperature tests: Temperature range -40°C to +180°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 3.5 K/min Bjdpfszizmzsx Akneww Cooling 4 K/min Heat compensation approx. 3500 W at +20°C approx. 2000 W at -20°C Climate tests: Temperature range +10°C to +90°C Humidity range 10% to 95% relative humidity Dew point range +5°C to 78°C Temperature deviation ≤ 1.0 K over time Humidity deviation ≤ +3.0% RH over time The technical data refers to an ambient temperature of +25°C, rated voltage 400V, without test specimen, without heat compensation, and without additional equipment. Options may influence the performance data. Technical design: Refrigeration unit air-cooled, low-noise, fully hermetic, stepless power adjustment through electronic monitoring and control system, environmentally friendly refrigerant R404A Test chamber: Floor load 150 kg / m2 Insert grid: Stainless steel, Surface area 620 x 600 mm Load per grid max. 35 kg Total load with max. grid configuration 100 kg Control: 32-bit controller LCD operating panel Digital display of setpoint and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Ethernet interface Free switching channels for on-site test specimen control Dimensions: Test volume 350 liters Internal dimensions: Height 750 mm × Width 650 mm × Depth 715 mm External dimensions: Height 1800 mm × Width 920 mm × Depth 1670 mm Operating data: Electrical connection 400V 3/N, 50 Hz Rated power 7.1 kW Rated current 11.5 A Protection class IP 54 Sound pressure level

Condition: used, Vötsch   Type: VC 7018   Vötsch Climate Testing Chamber VC 7018, Water-Cooled   Control Panel: “Touch Panel” All control and operating commands can be initiated by simply touching the function symbols on the “Touch Panel” control panel.   Adjustable Feet To compensate for uneven floors and to ensure sufficient ventilation of the machine, the testing chamber is equipped with adjustable feet.   Feedthroughs The testing chamber is equipped with feedthroughs on the right and left sides. These allow measuring cables and testing equipment to be routed into the testing chamber.   Feedthroughs installed as standard: R1: 125 mm L1: 50 mm   Testing chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm   Performance data for temperature tests:   Temperature range: -70°C to +180°C Temporal: ±0.1 to ±0.5 K Spatial: ±0.5 to ±2.0 K   Temperature change rate according to IEC 60068-3-5 Bwsdpozh Huhjfx Aknsw Heating: 4 K/min. Cooling: 2.3 K/min.   Performance data for climate tests:   Temperature range: -10°C to +95°C Humidity range: 10% to 98% RH   Temporal temperature deviation in the center of the usable space: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K   Temperature gradient: 1 to 2 K Temporal humidity deviation in the center of the usable space: ±1 to ±3 % RH   Electrical connection:   Rated voltage: 3/N/PE AC 400V ±10 50Hz Rated power: 5.9 kW Rated current: 12.0 A Connection cable: 3.5 m Fuse: 16 A, slow-blow, provided on site   Refrigerant: R-404A and R-23   Testing chamber volume: approx. 190 liters   Weight: approx. 460 kg net   For your safety as a buyer, please note the following information!   The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data and specifications are subject to change!)   We will gladly answer any further questions you may have over the phone.

Condition: used, Espec Climate testing chamber / temperature testing chamber Espec PL-4J climate testing chamber Temperature and climate testing chamber, water-cooled For sale is a used climate testing chamber from the manufacturer ESPEC Corp. The testing chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data Manufacturer: ESPEC Corp. Type: PL-4J Device type: Climate testing chamber / temperature testing chamber Year of manufacture: 2020 Test chamber volume: approx. 800 liters Weight: approx. 610 kg Temperature range: -40 °C to +100 °C Temperature change rate (heating): approx. 3 K/min Temperature change rate (cooling): approx. 2 K/min Bjdpfx Akozntxmonoww Humidity range: 10 to 98 % RH Refrigerant: R452A Refrigerant quantity: 1.16 kg + 0.36 kg Power connection: AC 400 V / 3~ / 50 Hz Max. power consumption: 21 A Internal dimensions (W × H × D): approx. 1000 × 1000 × 800 mm External dimensions (W × H × D): approx. 1410 × 1970 × 1273 mm Equipment Touchscreen control Program control Temperature and humidity control Stainless steel interior Viewing window with interior lighting 100 mm cable entry Water-cooled condenser Castors for easy transport Application areas Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Optical condition as shown in the pictures Scope of supply 1x ESPEC PL-4J climate testing chamber Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. Documented test run after successful inspection Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Vötsch Climate testing chamber / Temperature testing chamber Vötsch VCS³ 7034-5 Climate testing chamber Water-cooled With a temperature change rate of 5 K/min For sale is a used climate testing chamber from the manufacturer Vötsch Industrietechnik GmbH. The testing chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VCS³ 7034-5 Device type: Climate testing chamber / Temperature testing chamber Test chamber volume: approx. 335 liters External dimensions: Width 870 x Depth 1700 x Height 1775 mm Test chamber dimensions: Width 580 x Depth 765 x Height 750 mm Weight: approx. 570 kg Temperature range: -70 °C to +180 °C Temperature change rate (heating): approx. 7.0 K/min Temperature change rate (cooling): approx. 6.7 K/min Max. heat compensation: 3000 W at +20 °C / 3000 W at -20 °C Temperature deviation (time): ±0.1 to ±0.5 K Temperature homogeneity (spatial): ±0.5 to ±2.0 K Climate range (temperature): +10 °C to +95 °C Dew point range: +4 °C to +94 °C (extended to -3 °C, intermittent) Humidity range: 10 to 98 % RH Humidity deviation: ±1 to ±3 % RH Refrigerant: R404A / R-23 Refrigerant quantity: R404A 2.5 kg / R-23 0.75 kg ND max.: 21 bar(g) HD max.: 25 bar(g) Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 9 kW Rated current: 20 A On-site protection: 63 A slow-blow fuse Equipment: S!MPAC control system Touch panel operation Stainless steel interior Temperature and humidity control Ethernet interface USB interface Cable gland 50 mm Cable gland 125 mm Test object protection function Accessories as shown in the pictures Application areas: Temperature testing Climate testing Bsdozpihaopfx Aknoww Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition: Used Optical condition as shown in the pictures Scope of delivery: 1x Vötsch VCS³ 7034-5 Climate testing chamber Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. Documented test run after successful inspection The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Shipping or freight forwarding possible. Subject to change, errors and prior sale. We are happy to answer any further questions by telephone.

Condition: used, Espec Climate testing chamber / Temperature testing chamber Espec PL-4J Climate testing chamber Temperature and climate testing chamber, water-cooled For sale is a used climate testing chamber from the manufacturer ESPEC Corp. The testing chamber is suitable for temperature and climate testing, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data Manufacturer: ESPEC Corp. Type: PL-4J Device type: Climate testing chamber / Temperature testing chamber Year of manufacture: 2018 Testing chamber volume: approx. 800 liters Weight: approx. 610 kg Temperature range: -40 °C to +100 °C Temperature change rate (heating): approx. 3 K/min Temperature change rate (cooling): approx. 2 K/min Humidity range: 10 to 98 % RH Refrigerant: R452A Refrigerant quantity: 1.16 kg + 0.36 kg Power connection: AC 400 V / 3~ / 50 Hz Max. current consumption: 21 A Internal dimensions (W × H × D): approx. 1000 × 1000 × 800 mm External dimensions (W × H × D): approx. 1410 × 1970 × 1273 mm Bwsdpszntunefx Aknow Equipment Touchscreen control Program control Temperature and humidity control Stainless steel interior Viewing window with interior lighting 100 mm cable gland Water-cooled condenser Castors for easy transport Application areas Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Optical condition as shown in the pictures Scope of supply 1x ESPEC PL-4J Climate testing chamber Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers beforehand: 1. Functional check and replacement of any necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak test with certificate 4. Documented test run after successful inspection Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Vötschtechnik Climate chamber / Temperature chamber Vötschtechnik ClimeEvent C/340/70/5 Temperature and climate chamber, water-cooled For sale is a used climate chamber from Vötschtechnik GmbH. The chamber is suitable for temperature and climate testing, environmental simulation, material testing, quality assurance, and development and stress testing. Technical data Manufacturer: Vötschtechnik GmbH Type: ClimeEvent C/340/70/5 Device type: Climate chamber / Temperature chamber Year of manufacture: 2018 Test chamber volume: approx. 340 liters Weight: approx. 650 kg External dimensions (H x W x D): approx. 1830 x 900 x 1890 mm Internal dimensions (H x W x D): approx. 750 x 580 x 765 mm Temperature range: -70 °C to +180 °C Temperature change rate (heating): approx. 7 K/min Temperature change rate (cooling): approx. 6.7 K/min Max. heat compensation: approx. 3000 W Temperature deviation (over time): ±0.1 to ±0.5 K Temperature homogeneity (spatially): ±0.5 to ±1 K Temperature gradient: ≤2 K Climate range (temperature): +10 °C to +95 °C Dew point range: -3 °C to +94 °C Humidity range: 10 to 98 % RH Humidity deviation (over time): ±1 to ±3 % RH Temperature deviation (over time, climate mode): ±0.1 to ±0.3 K Temperature homogeneity (spatially, climate mode): ±0.5 to ±1 K Refrigerant: R449A / R23 Refrigerant quantity: 2.50 kg / 0.75 kg Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 8.6 kW Rated current: 21 A Sound pressure level: approx. 57 dB(A) Features Touchscreen control Interior made of stainless steel Large viewing window Interior lighting Water-cooled design Side cable entry Multiple insertion levels Ethernet interface USB interface Accessories according to images Application areas Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Optical condition according to images Scope of supply 1x Vötschtechnik ClimeEvent C/340/70/5 climate chamber Bodpfx Aksznvxisneww Accessories according to images Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Shipping or freight forwarding possible. Subject to change, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Vötsch Climate testing chamber / Temperature testing chamber Vötsch VC³ 7018 Climate testing chamber Temperature and climate testing chamber, air-cooled For sale is a used climate testing chamber from Vötsch Industrietechnik GmbH. The testing chamber is suitable for temperature and climate testing, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data Manufacturer: Vötsch Industrietechnik GmbH Type: VC³ 7018 Device type: Climate testing chamber / Temperature testing chamber Test chamber volume: approx. 190 liters Dimensions (approx.): Width: 870 mm, Depth: 1,550 mm, Height: 1,800 mm Test chamber dimensions: Width: 580 mm, Depth: 450 mm, Height: 750 mm Weight: approx. 460 kg Temperature range: -70 °C to +180 °C Temperature change rate (heating): approx. 4 K/min Temperature change rate (cooling): approx. 3 K/min Max. heat compensation: approx. 1,500 W Temperature deviation (time-related): ± 0.1 to ± 0.3 K Climate range (temperature): +10 °C to +95 °C Humidity range: 10 to 98 % RH Refrigerant 1: R404A Refrigerant quantity: 2.5 kg ND max.: 22.5 bar g HD max.: 25 bar g Refrigerant 2: R23 Refrigerant quantity: 0.75 kg ND max.: 22.5 bar g HD max.: 25 bar g Mains connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 4.9 kW Rated current: 16 A Equipment Touch panel control Programmable controller Stainless steel interior Temperature and humidity control LAN/Ethernet interface Bedpfx Akszm Ni Ejnoww Viewing window with internal lighting Documentation / Operating manual Test reports Accessories as shown in the pictures Application areas Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Workshop-checked Moisture absorber replaced Optical condition as shown in the pictures Scope of delivery 1x Vötsch VC³ 7018 climate testing chamber Documentation / Operating manual Test reports Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. Documented test run after successful inspection The table shown in the photos, as well as any other items not explicitly mentioned, are not included in the sale. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, CTS Type: C-70/600 CTS C-70/600 climate testing chamber air-cooled version with observation window, test specimen protection, and documentation For sale is a high-quality CTS climate testing chamber, type C-70/600, for precise temperature and climate testing in research, development, quality assurance, and industry. Technical data: Temperature range: -70 °C to +180 °C Humidity range: 10 % to 98 % RH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical connection: 400 V 3/N 50 Hz Rated power: 8.7 kW Rated current: 14.8 A Protection class: IP 22 Refrigerant: R404A (pre-cooling stage) / R23 (cooling stage) Cascade refrigeration system for low-temperature operation down to -70 °C Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Bjdjzmq Tlopfx Aknoww Equipment / Features: Observation window in the door Stainless steel test chamber CTS control panel with digital setpoint/actual value display Test specimen protection / temperature limiter Water connection / demineralized water supply Test chamber and condensate drain Pipe penetrations on the side of the test chamber RS232 interface according to documentation Digital outputs for test specimen control Test chamber dimensions according to documentation: approx. 850 x 850 x 830 mm External dimensions according to documentation: approx. 1900 x 1115 x 1850 mm Weight according to documentation: approx. 600 kg Scope of supply: CTS climate testing chamber C-70/600 including existing documentation / operating instructions Scope of supply as shown in the pictures For your safety as a buyer: The unit can be inspected by arrangement. Loading with a forklift can be arranged. For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Vötsch Type: VC³ 0100 Vötsch Climate Test Chamber, Air-Cooled Test chamber dimensions: Height 950 mm x Width 1100 mm x Depth 950 mm Device dimensions: Height 2000 mm x Width 1300 mm x Depth 1916 mm Bodsziypuspfx Aknsww Test chamber volume: 990 liters Temperature tests: Minimum temperature -0°C Maximum temperature +90°C Temperature change rate (cooling): 0.2 K/min Temperature change rate (heating): 0.5 K/min Temperature deviation (over time): ± 0.1 to ± 0.5 K Temperature homogeneity (spatial): ± 0.5 to ± 1.0 K Thermal compensation at +20 °C: 350 W Climate tests: Minimum temperature +10°C Maximum temperature +90°C Dew point temperature range: +4°C to +89.5°C Humidity range: 10 to 98% RH Humidity deviation (over time): ± 1 to ± 3% RH Temperature deviation (over time): ± 0.1 to ± 0.3 K Temperature homogeneity (spatial): ± 0.5 to ± 1.0 K Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.3 kW Rated current: 10 A Refrigerant: R-404A Weight: approx. 1400 kg For your safety as a buyer, please note the following information: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss   Type: WK111-600   Weiss Climate Testing Chamber, Air-Cooled   Performance data for temperature tests:   Temperature range: -5°C – +90°C Temperature fluctuation over time: ± 0.1 to ± 0.5 K Temperature deviation spatially: ± 0.5 to ± 1 (corresponds to temperature gradient) 1 to 2 Temperature change rate: Heating: 0.5 K/min Cooling: 0.2 K/min   Performance data for climate tests   Temperature range: +10 to +90°C Humidity range: 10 to 98 % RH Temperature fluctuation over time: ± 0.1 to ± 0.3 Temperature deviation spatially: ± 0.5 to ± 1 (corresponds to temperature gradient) 1 to 2 Humidity fluctuation over time: ± 1 to ± 3   Test chamber dimensions: Width 800 mm x Depth 800 mm x Height 950 mm Housing dimensions: Width 1000 mm x Depth 1660 mm x Height 1975 mm Feedthroughs 1 feedthrough ∅ 50 mm, installed on the left 1 feedthrough ∅ 125 mm, installed on the right   Power supply: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.3 KW Rated current: 10.0 A Refrigerant: R 404 A 600 liters Weight: 540 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run.   Condition: used   Scope of supply: (See picture)   Bsdpfx Aoziyxcoknjww (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have on the phone.

Condition: used, Weiss Climate chamber / Temperature and humidity chamber Weiss WK3-340/70 Climate chamber Temperature range from -70 °C to +180 °C with humidity control Approx. 335 liters / 10 to 98 % RH / air-cooled For sale is a used climate chamber from the manufacturer Weiss Umwelttechnik GmbH. Bwjdpfx Aoz A A T Hjknow The climate chamber is suitable for temperature and humidity testing, environmental simulation, material testing, quality assurance, electronics and component testing as well as development, aging and stress tests. The unit features a programmable touch panel control, temperature and humidity control, a large observation window and lateral test specimen ports. Technical data: Manufacturer: Weiss Umwelttechnik GmbH Type: WK3-340/70 Device type: Climate chamber / Temperature and humidity chamber Test chamber volume: approx. 335 liters Temperature range: -70 °C to +180 °C Temperature change rate cooling: approx. 3 K/min Temperature change rate heating: approx. 3 K/min Temperature deviation over time: ±0.1 to ±0.5 K Temperature homogeneity spatially: ±0.5 to ±1.5 K Climate range temperature: +10 °C to +95 °C Dew point range: -3 °C to +94 °C Humidity range: 10 to 98 % RH Temperature deviation over time in climate operation: ±0.1 to ±0.3 K Temperature homogeneity spatially in climate operation: ±0.5 to ±1 K Humidity deviation over time: ±1 to ±3 % RH Refrigerant 1: R404A Refrigerant quantity: 2.5 kg Max. low pressure: 22.5 bar g Max. high pressure: 25 bar g Refrigerant 2: R23 Refrigerant quantity: 0.55 kg Max. low pressure: 22.5 bar g Max. high pressure: 25 bar g Standby pressure: 13 bar g Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 5.5 kW Rated current: 16 A Dimensions and weight: Test chamber volume: approx. 335 liters Internal dimensions (H × W × D): approx. 750 × 580 × 765 mm External dimensions (H × W × D): approx. 1,775 × 870 × 1,600 mm Weight: approx. 585 kg Equipment: Programmable touch panel control Temperature control Humidity control Air-cooled design Stainless steel interior Large observation window Test chamber lighting Lateral test specimen ports Adjustable feet Program and manual operation Test specimen port right: DN 125 mm Test specimen port left: DN 50 mm Stainless steel inserts as shown in the pictures Areas of application: Temperature testing Climate testing Humidity testing Environmental simulation Material testing Electronics testing Component testing Assembly testing Quality assurance Research and development Lifetime testing Aging and stress tests Condition: Used Optical condition as shown in the pictures Scope of delivery: 1x Weiss WK3-340/70 Climate chamber Touch panel control Stainless steel inserts as shown in the pictures Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered test and climate systems in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Shipping or freight forwarding possible. Subject to change, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Vötsch Climate testing chamber / Temperature testing chamber Vötsch VC 4034 Climate testing chamber Temperature and climate testing chamber, air-cooled Converted to R452A For sale is a used climate testing chamber from the manufacturer Vötsch Industrietechnik GmbH. The testing chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data Manufacturer: Vötsch Industrietechnik GmbH Type: VC 4034 Equipment type: Climate testing chamber / Temperature testing chamber Test chamber volume: approx. 335 liters Test chamber dimensions: approx. 580 x 765 x 750 mm (W x D x H) Housing dimensions: approx. 780 x 1758 x 1800 mm (W x D x H) Weight: approx. 515 kg net Temperature range: -40 °C to +180 °C Temperature change rate, heating: approx. 3.2 K/min Temperature change rate, cooling: approx. 3.5 K/min Temperature deviation over time: ± 0.1 to ± 0.5 K Temperature homogeneity, spatially: ± 0.5 to ± 1.5 K Climate range, temperature: -40 °C to +180 °C Humidity range: 10 % to 98 % RH Temperature deviation over time: ± 0.1 to ± 0.3 K Temperature homogeneity, spatially: ± 0.5 to ± 1.0 K Refrigerant: R452A Refrigerant quantity: 2.5 kg Maximum suction pressure: 22 bar g Maximum discharge pressure: 25 bar g Mains connection: 3/N/PE AC 400 V +10 % / 50 Hz Rated power: 4.1 kW Rated current: 12.5 A Equipment Bedpfx Ajzd Dm Heknjww Touch panel operation Viewing window in the door Stainless steel interior Test chamber lighting Side feedthrough Insert grid Air-cooled system Documentation / Operating manual Accessories according to the pictures Application areas Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Optical condition according to the pictures Scope of delivery 1x Vötsch VC 4034 Climate testing chamber Insert grid Control panel / controller Documentation / Documents Accessories according to the pictures Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Shipping or freight shipping possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Vötsch Climate testing chamber / temperature and humidity testing chamber Vötsch VCS³ 7034-5 climate testing chamber, water-cooled Temperature range from -70 °C to +180 °C with humidity control Workshop-tested with documented test run and only approximately 3,485 operating hours For sale is a used climate testing chamber from the manufacturer Vötsch Industrietechnik GmbH. The climate testing chamber is suitable for temperature and humidity tests, environmental simulation, material testing, quality assurance, electronics and component testing as well as development, aging and stress tests. The unit features a programmable touch panel control, temperature and humidity control, a large viewing window and a lateral test specimen port. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VCS³ 7034-5 Equipment type: Climate testing chamber / temperature and humidity testing chamber Year of manufacture: 2016 Operating hours: approx. 3,485 h Temperature range: -70 °C to +180 °C Humidity control: available Water-cooled version Test results documented in the workshop protocol: Temperature change rate, heating: approx. 7.65 K/min Temperature change rate, cooling: approx. 7.71 K/min Humidity test at 30 °C / 40 % r.h. Humidity test at 80 °C / 85 % r.h. Refrigerant 1: R404A Refrigerant quantity: 2.50 kg Max. low pressure: 21 bar g Max. high pressure: 25 bar g Refrigerant 2: R23 Refrigerant quantity: 0.75 kg Max. low pressure: 21 bar g Max. high pressure: 25 bar g Standing pressure: 13 bar g Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Nominal power: 9 kW Nominal current: 20 A Test chamber volume: approx. 335 liters Internal dimensions (H × W × D): 750 × 580 × 765 mm External dimensions (H × W × D): 1,800 × 872 × 1,758 mm Weight: 585 kg Equipment: Programmable touch panel control Temperature control Humidity control Water-cooled version Interior made of stainless steel Large viewing window Test chamber lighting Separate digital temperature and humidity display Test specimen port Ø 125 mm Additional test specimen port Ø 50 mm Front main switch Electrical connection with approx. 3.5 m connection cable Connection for condensate drain / overflow Cooling water connection Connection for demineralized water Compressed air connection Several stainless steel inserts in the test chamber Program operation and manual operation Application areas: Temperature testing Climate testing Humidity testing Environmental simulation Material testing Electronics testing Component testing Assembly testing Sensor testing Quality assurance Research and development Service life testing Aging and stress tests Condition: Used Optical condition according to images Bwedpfszqmx Ejx Aknjw Scope of supply: 1x Vötsch VCS³ 7034-5 climate testing chamber Programmable touch panel Stainless steel inserts as shown in the images Accessories as shown in the images Important note: For the safety of our customers, the following work will be carried out on the offered testing and climate systems in advance: 1. Functional test and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection The table or other items that are not explicitly mentioned in the photos are not part of the sale. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, RS Simulators Type: KSS 600/75-10K RS Simulators climate chamber / environmental simulation chamber Prüf- und Messtechnik GmbH Model: KSS 600/75-10K water-cooled For sale is a professional climate test chamber / environmental simulation chamber for temperature tests, climate tests, material tests, aging tests, as well as industrial testing and measurement applications. The unit is in used condition and can be fully inspected according to the images. The control panel / display is present and shown in the images. Technical data Type: KSS 600/75-10K 600 liters Temperature range: -75 °C to +180 °C Bedpfxjy H Ib Ae Akneww Temperature change rate: Cooling: 10 K/min Heating: 10 K/min Test chamber dimensions (W x D x H): 840 × 840 × 840 mm External dimensions (W x D x H): 1200 × 1600 × 1995 mm Voltage: 3 x 400 V / N / PE Current consumption: 55 A Weight: approx. 1400 kg Refrigerant according to nameplate: R404A – 6.0 kg R23 – 3.0 kg Equipment / Features RS Simulators control panel / operating panel Programmable operation possible Observation window in the door Test chamber with temperature monitoring Operating hour counter Side access / connection possibility Robust industrial design Heavy-duty design with an approximate weight of 1400 kg Scope of supply RS Simulators climate chamber KSS 600/75-10K Scope of supply as shown in the images Condition & Notes Condition: used Inspection possible by arrangement. Loading can be arranged. (Changes, prior sale, and errors in the technical data are subject to change!) We will gladly answer any further questions by telephone or message.

Condition: used, Weiss Climate testing chamber ClimeEvent C/1000/70/5, water-cooled, 1000 liters, year of manufacture 2019, operating hours 3577.95 h. For sale is a high-quality climate testing chamber of the type ClimeEvent C/1000/70/5. The device is used in industry, development, and quality assurance to test components and products under extreme temperature and climatic conditions. The chamber enables realistic simulations of environmental conditions – from extreme cold to high temperatures and humidity levels. Ideal for electronics, automotive, material testing, and research. The device operates reliably and reproducibly and is designed for long-term tests and tests in accordance with standards. Bwsdpfey Iyx Aox Aknsw With this climate chamber, temperature and humidity conditions can be specifically set and controlled. This allows the aging, stress, and function of components to be tested under real environmental conditions. Typical applications include temperature cycling tests, climate tests with humidity, and endurance tests. Due to the rapid temperature change (up to approx. 5 K/min), accelerated tests are also possible. Technical data: Type: ClimeEvent C/1000/70/5 Year of manufacture: 2019 Temperature range: approx. -70 °C to +180 °C Temperature change rate: up to approx. 5 K/min Humidity range: approx. 10 % to 98 % RH Internal dimensions (test chamber): approx. 950 x 1100 x 950 mm Volume: approx. 1000 liters External dimensions (approx.): 2000 x 1415 x 2030 mm Power connection: 3/N/PE AC 400 V ±10% / 50 Hz Rated power: approx. 21 kW Rated current: approx. 34 A Refrigerant: R449A / R23 Weight: approx. 1300 kg For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have by phone.