Used Climatic Test Chamber for sale (15,755)

Condition: good (used), CTS Type: TSR-30/1000 Water-cooled The type designation of the CTS enclosure series is made up as follows: z. e.g. type TSR -30/1000 1) T means: Temperature 2) S means: stress screening 3) R means: external conditioning 4) -30 means: lower temperature -30 °C 5) 1000 means: 1000 liter test chamber volume Technical performance data: A) TSR-30/1000 basic device without hose connections, i.e. when used as a stand-alone temperature test chamber Temperature tests: Temperature range -40°C to +180°C Final temperature -45°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 6.0 K/min Cooling 5.0 K/min Heat radiation approx. 5000 W at +20°C approx. 4200 W at ± 0°C approx. 3000 W at -20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Air volume flow approx.2000m³/h B) TSR-30/1000 basic unit with hose connections, for connection to an external test room provided by the customer Temperature tests: Temperature range -30°C to +170°C Temperature deviation ≤ ±0.1 to 0.5 K in time Average rate of temperature change, measured with short-circuited circuit Heating 4.0 K/min Cooling 4.0 K/min in the range from +150°C to -10°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment, measured with short-circuited circuit Attention: The external test chamber provided by the customer must be absolutely tight and appropriately insulated, any feed-throughs must be optimally sealed on site. Dimensions: Test volume 1000 liters Air circulation connection Ø 200 mm Test chamber dimensions Height 900 mm Width 1000 mm Depth 1100 mm External dimensions Height 1950 mm Width 1270 mm Depth 2245 mm Technical design: Refrigeration unit: water-cooled, low-noise, fully hermetic Infinitely variable capacity adjustment through electronic monitoring and control system, environmentally friendly refrigerant R404A Door: Fully opening door, door hinge on the left, one-handed operation, lockable. Shelf: Stainless steel, support surface 970 x 980 mm Max. load per shelf 35 kg Total load with max. shelf load 100 kg Test area lighting: Halogen lamp 20 W, 12 V Control: - 32 bit controller - LCD control panel Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 13.3 kW Protection class IP 22 Sound pressure level < 60 dB(A) Weight approx. 850 kg Gtedpfx Aorivfcef Njt The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS Temperature test chamber T-55/1000 Li water-cooled Temperature range: -50°C to +100°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Nominal current: 18 A Compressor: TFH2511Z / TFH2511Z Refrigerant R404A/R23 The type designation of the CTS cabinet series is composed as follows: z. e.g. type T -55/1000/Li 1) T means: temperature 2) -55 means: lower temperature -55 °C 3) 1000 means: 1000 liter test chamber volume 4) Li means: special equipment for tests with lithium-ion accumulators Control: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text Ethernet interface RS 232 interface Free switching channels for on-site test material control Test room lighting: energy-efficient, high-intensity LED light strip mounted on the door Insert grid: Stainless steel, support surface 970 x 980 mm Load per shelf max. 35 kg Total load with max. grating load 100 kg 1a Feed-through NW50 1b Feed-through 2x NW125 1c Entry port 2x Rp 314° for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat compensation approx. 4000 W at +20°C approx. 2200 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without heat compensation and without additional equipment. Options may affect the performance data. Dimensions: Test volume 1000 liters Test chamber dimensions Height, approx. 1000 mm, width, approx. 860 mm, depth, approx. 1100 mm External dimensions Height, approx. 1950 mm, width, approx. 1270 mm, depth, approx. 1900 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Nominal current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (according to DIN EN ISO 3744 measured at a distance of 1 m from the front) Mass approx. 1000 kg Gtedpfx Ajvba Raof Njt Heat output to the installation room 10.4 kW Cooling unit: water-cooled, low-noise, fully hermetic Infinitely variable output adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer a temperature test cabinet. Water cooled Temperature range: -45°C to +180°C External dimensions: Width 1300 mm x height 2100 mm x depth 2250 mm Test chamber dimensions: Width 840 mm x height 840 mm x depth 840 mm Gjdomn Rcispfx Af Njtt Unit part : width 2300 mm x height 2000 mm x depth 1300 mm Average heating rate: approx. 3 K/min Average cooling rate: approx. 2 K/min Power consumption: 15 A Connection voltage: 3x400V/N/PE 50Hz Weight: approx. 1000 kg Type: VTS 600/45 RS Refrigerant: R452 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: good (used), Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch temperature test chamber water-cooled Temperature range -70°C to + 180°C Temperature deviation temporal ± 0.1 to ± 0.5 K Temperature deviation in terms of time ± 0.5 to ± 2.0 K Temperature change rate cooling 5.0 K/min Temperature change rate heating 6.5 K/min Heat compensation +20°C 3000 W Thermal compensation -20°C 3000 W Test chamber dimensions: Width 580 mm Depth 765 mm Height 750 mm External dimensions: Width 870 mm Depth 1595 mm Height 1775 mm Gsdpfsun Rv Nox Af Nett Test chamber volume 335 liters Rated voltage: 3/N/PE AC, 400V ±10 %, 50Hz Rated power: 10 kW Rated current: 21 A Sound level at 1m distance (free-field measurement) < 69dB (A) Lateral feed-through 5.5 cm / 12.5 cm Cabinet is water-cooled Refrigerant: R- 404A and R 23 Weight approx. 570 kg The following information for you as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. refilling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer a TIRA temperature test chamber. TIRA temperature test chamber air-cooled The chamber has the option for an external test box with external sensor connection Gtsdpfsnyh T Sjx Af Not can therefore also be used as an external temperature control unit. Temperature range -20°C...+140°C Temperature stability over time ± 0.1°C...± 0.3°C External dimensions Width 860 mm x depth 1500 mm x height 2100 mm Test chamber dimensions width 601 mm x depth 545 mm x height 692 mm Electrical connection 400V +6% / -10% 50Hz 3P+N+PE Rated current: 10.0 (max.17) A Rated power: 5.2 (max.9.0) kW Net weight: 735 kg Refrigerant: R404A / R23 Type: TTRE 2001S The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Espec Gjdpfx Asn Arznsf Nett Here we offer an Espec(ThermoTec) stress test chamber. Overpressure humidity tests at over 100 degrees in many different modes Program capacity of 10 patterns with 30 steps per pattern A variety of protection mechanisms; overheat/overpressure protection, detection of water- supply failure.Complete door interlock and temperature sensor. Saturated Temp Range 105 to 142.9°C Unsaturated Temp Range 105 to 132.9°C Humidity range 50 to 100% r.h. Nominal pressure 0.196 MPa at 132.9°C and 100% e.F. External dimensions: width 740 x height 1553 x depth 1000 mm Test chamber dimensions: Width 355x Height 355 x Depth 426 mm Other equipment: with rails and grid Test material connections in the interior Type: EHS-221M Scope of delivery: See pictures 300 kg Condition: Used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Vötsch shock test chamber Here we offer you a Vötsch shock test chamber. Water cooled Temp. range -80C to +220C Hot chamber +50 to +220 Medium chamber -10 to +90 Cold chamber -80 to +70 Mains voltage 400V +-10% 3/N 50Hz Rated current 30.5 A Rated power 13.5 KW Refrigerant VK : R 404A 3.00kg p*: 25bar Refrigerant TK : R23 15bar p* : 25 bar Condition: used / used Type: VT 7012 S3 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) Gtjdsn Avcuopfx Af Njt (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Weiss temperature test chamber Here we offer a temperature test chamber. Weiss temperature test chamber water cooled Technical data: Test cabinet designation: WT-600/70 Outer dimensions with hinges and door lock height 1995 mm, width 1090 mm, depth 1660 mm Outer dimensions without hinges and door lock height 1995 mm, width 1000 mm, depth 1660 mm Internal dimensions: Height 950 mm, width 800 mm, depth 800 mm Test chamber capacity: approx. 600 liters cold / heat operation -70°C to 180°C Temperature change per time cooling approx. 2.5 K/min Heating up approx. 4 K/min 3/N/PE AC 400V ±10% 50Hz Rated power: 9.1 kW Rated current: 19 A Fuse on site: 32 A slow blow Permissible test material weight Gtjdoiqk Abopfx Af Not Total load of grate supports 80kg test chamber floor 80kg, insert grate 40kg Refrigerant: R 404A/R23 Weight: 675kg Type: WT-600/70 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer a temperature shock test cabinet. White Temperature Shock Test Cabinet Air Cooled Specification: Temperature range hot chamber +60°C ... +220°C Temperature range cold chamber -10°C ... -80°C Change hot/cold chamber 10 s Temperature constancy ±1 K Dimensions and other data: External dimensions: Height 1990 mm Width ( without and with door hinge ) without....approx. 1820 mm with....approx. 1850 mm Depth ( without and with test room door ) without....ca. 900 mm with....ca. 1155 mm Dimensions of the lifting basket ( test chamber ) height 450 mm, width 500 mm, depth 600 mm volume 130 liters Test space load max. 20 kg Test chamber floor load max. 20 kg Cooling water pressure min. 2 ... max. 6 bar Max. Backup fuse 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of unit approx. 65 dB(A) Cooling cascade water cooled Connected load: 3/N/PE/AC 400V ±10% 50Hz /14,0 kW nominal current 26,0 A Refrigerant R 404A / R23 Weight: approx. 950 kg Type: TS 130 Gtedpfxelgux Aj Af Not Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Vötsch Type: VTS³ 7027-25 Heraeus Vötsch temperature test chamber, water-cooled Performance data: With temperature change rate of 25 K/min Test chamber dimensions Height 750 mm Width 580 mm Depth 615 mm Godpstz Rqmofx Af Nstt External dimensions Height 1775 mm Width 780 mm Depth 1895 mm Temperature range -72°C to + 180°C Temperature deviation temporal ± 0.1 to ± 0.5 Temperature homogeneity in space ± 0.5 to ± 2.0 Temperature change rate cooling 25 K/min Temperature change rate heating 25 K/min Heat compensation at -20 °C 8000 W Heat compensation at +20 °C 8000 W Test volume: 270 liters 2x lateral feed-through ∅ 125 cm 1x side feed-through ∅ 50 cm Cabinet is water-cooled Test room lighting: LED strip 24 V, 6.8 W / 2x halogen bulb 24 V, 50 W Electrical connection: Nominal voltage: 3/N/PE AC 400V ±10% 50Hz Nominal power: 26 KW Rated current: 44 A Refrigerant: R-452A and R-23 Weight: approx. 980 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Vötsch Type: VC³ 0100 Vötsch climatic test chamber, air-cooled Test chamber dimensions: Height 950 mm x width 1100 mm x depth 950 mm Device dimensions: Height 2000 mm x width 1300 mm x depth 1916 mm Test chamber 990 liters Temperature tests: Minimum temperature -0°C Maximum temperature +90°C Temperature change rate cooling 0.2 K/min Temperature change rate heating 0.5 K/min Temperature deviation in time ± 0.1 to ± 0.5 K Temperature homogeneity in space ± 0.5 to ± 1.0 K Heat compensation at +20 °C 350W Climatic tests: Minimum temperature +10°C Maximum temperature +90°C Dew point temperature range +4°C to +89.5°C Humidity range 10 to 98% r. h. Humidity deviation over time ± 1 to ± 3% r. h. Temperature deviation temporal ± 0.1 to ± 0.3K Temperature homogeneity in space ± 0.5 to ± 1.0K Voltage: 1/N/PE AC 230V±10% 50Hz Rated power: 2.3 kW Rated current: 10 A Refrigerant: R-404A Weight approx. 1400 kg The following information is for your safety as a buyer! Godpetz T D Ajfx Af Nott The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Vötsch Model: VT³ 4100 Water-Cooled Temperature Test Chamber S!MCON/32.NET (with Touch Panel) Control System Features: - Color touchscreen with intuitive menu navigation (typically 5.7" or larger) - Programming of temperature/humidity profiles with ramps and dwell times - Data acquisition & logging (e.g., temperature profile, alarms) - USB port for data export (CSV, optionally S!MPATI compatible) - Network interface (Ethernet) for remote monitoring and control - User management with password protection - Interfaces: Volt-free contacts, optionally Modbus or Profibus VT³ 4100 – Technical Specifications (Temperature Test Chamber) - Test volume: 990 liters - Temperature range: -40 °C to +180 °C Gjdpfx Afjwyu H Ee Nott - Temporal temperature deviation: ±0.1 to ±0.5 K - Spatial temperature deviation: ±0.5 to ±1.5 K - Temperature gradient: 1 to 3 K - Temperature change rate (per IEC 60068-3-5): • Heating: 4.0 K/min • Cooling: 3.0 K/min - Maximum heat compensation capacity: 4500 W - Calibration values: +23 °C and +80 °C - Internal dimensions (W×D×H): 1100 × 950 × 950 mm - External dimensions (W×D×H): 1390 × 1955 × 1995 mm Feed-Throughs: The chamber is equipped with feed-throughs on both the right and left sides, allowing insertion of measuring cables and test devices into the test space. • 1 × L1 nominal width 50 mm • 1 × R1 nominal width 125 mm • 3 × R1 nominal width 50 mm Electrical connection: 3/N/PE AC, 400V ±10%, 50Hz Power consumption: 11.5 kW Rated current: 22 A Noise level: approx. 62 dB(A) Refrigerant: R452A Weight: 920 kg Important information for buyers: For your security, the following measures are carried out on all our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant, if needed 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run Condition: used Scope of delivery: (see picture) (Subject to change and errors in technical data; information may be subject to alteration!) For any further questions, feel free to contact us by phone.

Condition: excellent (used), Vötsch Type: VBT 03/500 Air-cooled Temperature test chamber with spray device Technical description: Data for temperature tests without water: Temperature range -30°C to +80°C Temperature deviation in steady state according to IEC 60068-3-5 dependent on the test chamber temperature over time ± 1 K Temperature change rate according to IEC 60068-3-5 Heating: approx. 2 K/min. Cooling: approx. 2 K/min. Data for temperature tests with water Temperature range +5°C to +80°C Possible water level -10 mm to 540 mm Water level = -10 mm The water level is below the insert grid Water level = 0 mm The water level is at the top edge of the insert grid Data for standard spray device Number of spray nozzles: 6 Spray volume per nozzle: 0.5 l/min Data for spray device according to EN 539-2, Method B Number of spray nozzles: 6 Spray volume per nozzle: 4.5 l/min Additional flooding nozzles: 2 Spray volume of additional nozzle: 6 l/min Compressed air consumption: approx. 3 m³/h Gedpfewc Nvgox Af Nstt Data for water tank with pre-temperature control Volume: approx. 2000 l Temperature range for pre-temperature control +5°C to +40°C Temperature change duration Cooling of +18°C to +5°C approx. 15 h Heating from +15°C to +40°C approx. 10 h Installation and Operation Data: Test chamber: Width 1120 mm, Depth 840 mm, Height 540 mm Housing: Width 2700 mm, Depth 1300 mm, Height 1575 mm Water tank: Width 1100 mm, Depth 800 mm, Height 2200 mm Plug-ins 1 50 mm diameter plug installed on the left Test chamber capacity: approx. 500 liters Refrigerant R-404a Electrical connection: Nominal voltage 3/N/PE AC 400V ± 10% 50Hz Nominal power approx. 26 kW Nominal current approx. 44.0 A (neutral conductor loaded) Fuse protection 63 A gG, on-site Weight approx. 890 kg net For your safety, please note the following information! The following steps are carried out on our chambers in advance: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Vötsch Gjdpfx Ajwgaykjf Njtt Type: VC 7018 Vötsch Climatic Test Chamber VC 7018 Water-Cooled Touch Panel Control Unit On the touch panel control unit, all control and operating commands can be triggered by simply touching the function symbols. Adjustable Feet To compensate for uneven floors and ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Ports The test chamber is equipped with port holes on the right and left sides. These allow measurement cables and test equipment to be routed into the test chamber. Feedthrough included in standard equipment R1: NW 125 mm L1: NW 50 mm Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Characteristics for temperature tests: Temperature range: -70°C to +180°C Temperature ±0.1 to ±0.5 K Spatial ±0.5 to ±2.0 K Temperature change rate according to IEC 60068-3-5 Heating: 4 K/min Cooling: 2.3 K/min Characteristics for climatic tests: Temperature range: -10°C to +95°C Humidity range: 10% to 98% r.h. F. Temperature deviation over time in the center of the usable space ± 0.1 to ± 0.3 K Temperature deviation over space ± 0.5 to ± 1.0 K Temperature gradient 1 to 2 K Humidity deviation over time in the center of the usable space ± 1 to ± 3 %RH Electrical connection: Nominal voltage: 3/N/PE AC 400V ±10 50Hz Nominal power: 5.9 kW Nominal current: 12.0 A Connection cable: 3.5 m Fuse protection: 16 A slow-blow, provided by the customer Refrigerants: R-404A and R-23 Test chamber capacity: approx. 190 liters Weight: approx. 460 kg net For your safety, the following information is provided as a buyer! The following steps are performed on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Vötsch Type: VT 7060 Vötsch VT 7060 Temperature Chamber 600 Liter with Simcon 32-net Chamber is air-cooled Reliable climate chamber for demanding environmental simulations Ideal for laboratories, R&D, and quality assurance. Device description: For sale is a professional temperature chamber from manufacturer Vötsch Industrietechnik, model VT 7060 with SIMcon 32-net controller. This high-performance unit is suitable for a wide range of demanding environmental simulations, from material testing and electronics tests to long-term climate stress tests. Technical data (summary): Model: Vötsch VT 7060 Internal volume: approx. 600 liters Temperature range: –70 °C to +180 °C Temperature deviation when stabilized: Temporal: ±0.1 K to ±0.5 K Spatial: ±0.5 K to ±2.0 K Temperature change rate (without test specimen): Heating: 4 K/min Cooling: 3 K/min Control: SIMcon 32-net with touch panel Interfaces: RS232, optionally RS485/422 1 × port, NW 50 mm, left Gtedpfx Afewybb Ne Net 1 × port, NW 125 mm, left 2 × ports, each NW 125 mm, right External dimensions (approx.): Width 1090 × Height 1960 × Depth 1995 mm Internal dimensions (approx.): Width 800 × Height 800 × Depth 950 mm Rated voltage: 3/N/PE AC, 400 V ±10 %, 50 Hz Rated power: 9.1 kW Rated current: 19.0 A Refrigerants: R 404A and R 23 Weight approx. 675 kg For your safety as a buyer, please note the following: The following steps are carried out on all chambers we offer: 1. Functional test and replacement of necessary components 2. If necessary, new charge with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers undergo a documented test run. Shipping / Collection: Collection preferred Shipping via freight carrier on pallet possible Europe-wide. (Shipping costs according to expenditure) Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change and errors!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), Espec Model: PSL-4KPH Espec Temperature and Climate Test Chamber, Air-Cooled There is a minor dent at the upper edge of the door (see photo). The door closes perfectly, the seal is intact, and the climate chamber operates without any technical issues. The dent is purely cosmetic and does not affect function, sealing, or control accuracy. Temperature range: -70°C to +150°C Humidity range: 20 to 98% r.h. Temperature/humidity fluctuation: ± 0.3°C / ± 2.5% r.h. Temperature/humidity stability: ± 0.5°C / ± 3% r.h. Heating/cooling rates & times: Heating rate: 5.0°C/min Cooling rate: 3.0°C/min Test chamber dimensions: Width 1000 mm x Height 1000 mm x Depth 800 mm External dimensions: Width 1410 mm x Height 1983 mm x Depth 1593 mm Feed-through with silicone stopper, 100 mm With RS232 interface Test chamber volume: 800 liters Refrigerants: R-404A, R-508A Gtsdpfx Aewz Er Uof Not Stainless steel construction, AC 400 V 3φ, 50Hz, 31 A Net weight approx. 720 kg For your safety as a buyer, please note the following: The following points are carried out in advance on all chambers we offer: 1. Functional inspection and replacement of necessary components 2. New refill with legally compliant refrigerants 3. After successful inspection, the chambers undergo a trial run monitored by calibrated devices. Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and correction!) We would be happy to answer any further questions you may have by phone.

Condition: excellent (used), RS simulators Gedogl Acrspfx Af Nstt Here we offer a temperature test cabinet. Air cooled Temperature range: -50°C to +100°C Test chamber dimensions: Width 520 mm x height 520 mm x depth 500 mm External dimensions: Width 820 mm x height 1750 mm x depth 1300 mm current consumption: 13,5 A Connection voltage: 3x400V/N/PE 50Hz Weight: approx. 800 kg Type: TS 150/45 (50) Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, information are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), White temperature shock test chamber Here we offer a temperature shock test chamber. Weiss Temperature Shock Test Cabinet Water Cooled Specification: Temperature range hot chamber +60°C ... +220°C Temperature range cold chamber -10°C ... -80°C Change hot/cold chamber 10 sec. Temperature constancy ±1 K Dimensions and further data: External dimensions: Height 1990 mm Width ( without and with door hinge ) without....approx. 1820 mm with....approx. 1850 mm Depth ( without and with test room door ) without....ca. 900 mm with....ca. 1155 mm Dimensions of the lifting basket ( test chamber ) height 450 mm, width 500 mm, depth 600 mm volume 130 liters Test space load max. 20 kg Test chamber floor load max. 20 kg Gedpom Ak H Hjfx Af Njtt Cooling water pressure min. 2 ... max. 6 bar Max. Backup fuse 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of unit approx. 65 dB(A) Cooling cascade water cooled Connected load: 3/N/PE/AC 400V ±10% 50Hz /14,0 kW nominal current 26,0 A Refrigerant R 404A / R23 Weight: approx. 950 kg Type: TS 130 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Heraeus Vötsch Type: VT 7021 Air-cooled temperature test chamber 1 port, nominal width 80 mm, Test chamber volume: 210 liters Temperature range: -70°C to +180°C Temporal temperature deviation: ± 0.2 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate (heating): 2.5 K/min Temperature change rate (cooling): 2.5 K/min Max. heat compensation: 800 W Test chamber dimensions: Width 560 mm, Depth 570 mm, Height 630 mm External dimensions: Width 850 mm, Depth 1250 mm, Height 1640 mm Electrical connection: 1/NPE AC 230 V ± 10% 50 Hz Rated power approx. 1.8 kW, rated current 12 A Refrigerant: R404A and R23 Weight: 355 kg For your safety as a buyer, please note the following information! The following procedures are performed on the chambers we offer, in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) Gtodsw Rz Tljpfx Af Njt (Subject to technical modifications and errors in the details!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Heraeus Vötsch Type: VT 7021 Air-cooled temperature test chamber 1 port, nominal width 80 mm, Test chamber volume: 210 liters Temperature range: -70°C to +180°C Temporal temperature deviation: ± 0.2 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate (heating): 2.5 K/min Temperature change rate (cooling): 2.5 K/min Max. heat compensation: 800 W Test chamber dimensions: Width 560 mm, Depth 570 mm, Height 630 mm External dimensions: Width 850 mm, Depth 1250 mm, Height 1640 mm Electrical connection: 1/NPE AC 230 V ± 10% 50 Hz Rated power approx. 1.8 kW, rated current 12 A Refrigerant: R404A and R23 Weight: 355 kg Gtjdpfx Afswylv Dj Njt For your safety as a buyer, please note the following information! The following procedures are performed on the chambers we offer, in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Subject to technical modifications and errors in the details!) For further questions, please feel free to contact us by phone.

Condition: used, Weiss Gtodpfxsw Hctte Af Nst Type: WK1/1500/40 Weiss Climate Test Chamber, Air-Cooled with Humidity Control (converted to use refrigerant R-452a) Temperature range: -40°C to +180°C Cooling rate approx. 2.5 K/min, heating rate approx. 3.5 K/min Temporal temperature deviation at center of test space: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature range: +10°C to +95°C Humidity range: 10% to 98% r.H. Temporal temperature deviation at center of test space: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Heat compensation In the range of +25°C to +95°C, at a relative humidity up to 90%: 500 W Test chamber dimensions: Height: 950 mm, Width: 1100 mm, Depth: 1475 mm External dimensions: Height: 2005 mm, Width: 1300 mm, Depth: 2450 mm Test volume: approx. 1540 liters Test chamber lighting: Halogen bulb 12V, 50W Rated voltage: 3/NPEAC 400V ±10% 50Hz Rated power: 11.5 kW, Rated current: 22.0 A Fuse on site: 32A slow-blow Protection class (control cabinet and operator panel): IP 54 Refrigerant: R-452a Weight: 920 kg For your safety as a buyer, please note the following information: The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run, monitored with calibrated devices. Condition: used Scope of delivery: (see picture) (Technical specifications subject to change and errors excepted!) If you have further questions, we will be happy to answer them by phone.

Condition: excellent (used), CTS Type: T-70/600/S Water-cooled temperature test chamber Control system: - 32 bit controller - LCD control panel - Digital display of set and actual values - Numerical input of setpoints - Error messages in plain text Gtedpfx Asu U Ixmef Not - RS 232 interface - Free switching channels for on-site test material control Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20°C approx. 2500 W at + 0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions Height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions Height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Nominal current 14.8 A Protection class IP 22 Weight approx. 700 kg Refrigerant: R404A / R23 Weight: 600 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer you a Heraeus Vötsch temperature test chamber. Heraeus Vötsch temperature test chamber water cooled Temperature range -70°C to + 180°C Temperature deviation temporal ±0,1 to ±0,5 K Temperature deviation in time ±0.5 to ±2.0 K Temperature change rate cooling 7.5 K/min Gtsdpfxohh H Hij Af Njt Temperature change rate heating 7.5 K/min Heat compensation +20°C 3000 W Heat compensation -20°C 3000 W Test chamber dimensions: Width 580 mm Depth 450 mm Height 750 mm Outer dimensions: Width 870 mm Depth 1280 mm Height 1575 mm Observation window: Width 300 mm x height 540 mm Test chamber volume 190 litres Rated voltage: 3/N/PE AC, 400 V ±10 %, 50Hz Rated power: 10.5 kW Rated current: 22 A Fuse, on-site: 32 A slow-blow Sound level at 1m distance (free field measurement) < 69dB (A) lateral feed-through 50 cm / 125 cm Cabinet is water cooled Refrigerant: R 404A and R 23 Weight approx. 460 kg Type: VTS 7018-5 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. function check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer gladly on the phone for you.

Condition: excellent (used), Here we offer Vötsch shock test chamber. Temperature shock test chamber water cooled Two-chamber design Warm chamber: The temperature control of the warm chamber ranges from +50°C to +220°C Temperature deviation in time in the center of the chamber ± 1 K Temperature deviation spatially ± 2 K Temperature change rate heating 11 K/min cold chamber: the cold chamber from -80°C to +70°C Temperature deviation temporally in useful space center ± 1 K temperature deviation spatially ± 2 K Temperature change rate heating 2 K/min cooling 3 K/min Test chamber volume 125 liters Temperature range hot chamber +50°C to +220°C Temperature range cold chamber -80°C to +70°C Test chamber dimensions width 470mm depth 650mm height 410mm Outer dimensions width 930mm depth 2115mm height 1970+mm Feedthrough ∅ 67mm Rated power 10 kW Rated current 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerant R404A / R23 Weight: 1000 kg For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Godpfxjigg Hns Af Njtt Type: VT 7012 S2 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Heraeus Vötsch temperature test chamber Here we offer you a Heraeus Vötsch temperature test chamber. Heraeus Vötsch temperature test chamber water cooled Temperature range -70°C to + 180°C Temperature deviation temporal ± 0.1 to ± 0.5 K Temperature deviation in time ± 0.5 to ± 2.0 K Temperature change rate cooling 5.0 K/min Temperature change rate heating 6,5 K/min Heat compensation +20°C 3000 W Thermal compensation -20°C 3000 W Gjdpfxsir D U Ds Af Njtt Test chamber dimensions: Width 580 mm Depth 765 mm Height 750 mm Outer dimensions: Width 870 mm Depth 1595 mm Height 1775 mm Test chamber volume 335 liters Rated voltage: 3/N/PE AC, 400V ±10 %, 50Hz Rated power: 10 kW Rated current: 21 A Sound level at 1m distance (free field measurement) < 69dB (A) side entry 5,5 cm / 12,5 cm cabinet is water cooled Refrigerant: R 452A and R 23 weight approx. 570 kg Type: VTS 7034-5 For you as a buyer for safety the following information! The following points are carried out on our offered chambers in advance: 1. functional check and exchange of necessary components 2. new filling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.