Used Cnc Milling Machine With Tool Changer for sale (66,873)

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, Universal Milling Machine Deckel FP4M with 3-axis Heidenhain ND780 Digital Readout, special finish in light grey!!! Technical Data: >> Year of manufacture: 1986 Machine No. 2203-2126 >> Fixed angle table (newly planed) >> Spindle speed: 50 - 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head on spindle support adjustable by 150 mm >> Vertical and horizontal quill – SK40 >> Vertical quill extendable by 90 mm >> Pull stud system: M16 >> Weight approx. 1,500 kg Accessories and Features: Dujdpfxjylmh Do Ad Isp >> 3-axis digital readout Heidenhain ND780 >> Coolant system >> Chip tray >> Central lubrication About the machine: Offered is a Deckel FP4M universal milling machine in very good condition. The machine has been partially overhauled, with minimal backlash and all leadscrews move smoothly and evenly. The milling machine runs quietly even at maximum speeds. Rapid traverse is available on all axes and all bellows are new. The fixed angle table has been newly scraped. A reliable and user-friendly machine. Oil change carried out. Mechanically and electrically tested. The Heidenhain digital readout makes working easier and even more precise. Take the opportunity to view and test the machine under power at our facility. For an additional charge, the machine can be supplied in CE-compliant configuration.

Condition: good (used), Year of construction: 1996, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 1 rpm, quill stroke: 60 mm, A Kunzmann milling machine of the type WF 4/3 is for sale The machine is fully functional and ready for immediate use Technical data Control: Heidenhain TNC 124 Year of manufacture: 1996 Working range longitudinal X - axis: 400 mm transverse Y - axis: 350 mm vertical Z - axis: 400 mm Angled table, rigid Clamping surface: 650 x 350 mm Max. load: 250 kg Main drive AC motor: 5.5 kW Feed drives AC - single drives Feed infinitely variable 0 - 2 000 mm/min Tool holder: SK 40 Speed range: 1-4000 1/min Quill, vertical: stroke 60 mm Swivel range vertical milling head: ± 90° Tool clamping: hydraulic Linear stroke measuring systems, direct, distance-coded Resolution 0.001 mm Position deviation Pmax according to VDI/DGQ 3441 0.015 mm 0.015 mm Operating voltage 400 Volt, 50 Hz Power consumption approx. 12 kVA Weight approx. 1,750 kg On request, transportation and loading can be arranged at extra cost. organized throughout Europe. Prices plus VAT Dedpfx Asvftrxod Isup Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: good (used), functionality: fully functional, feed length X-axis: 300 mm, feed length Y-axis: 160 mm, feed length Z-axis: 340 mm, For sale is a conventional milling machine of the brand Deckel and type FP1 The small size of the machine makes it ideal for fast work with a small footprint The machine is fully functional Technical data: x-path 300 mm y-path 160 mm z-path 340 mm Tool holder SK40 Speed 40-2000 rpm Conventional control Table size: 600 x 210 mm Dujdpfsugv Hvsx Ad Isp Total power requirement 2 kW Machine weight approx. 0.73 t Space requirement approx. 1200x1100x1600 mm Loading and shipping throughout Europe can be organized on request. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, For sale is a die-sinking EDM machine of the brand OPS Ingersoll and the type Gentry Eagle 500 A matching Erowa automation for tool and workpiece change, as well as an identical 2nd system are also for sale in the package Offer is only valid for one Ingersoll machine if you are interested in the complete machine please mention in your inquiry The machine is in very good condition and fully functional. Both machines are loaded via Erowa Automation, this machine has its own tool changer. Technical data sheets available for download below in the advertisement Technical data for the EDM machines: Container dimensions: WxDxH: 770 x 670 x 440 mm Dielectric height: max 395 mm max top load: 100 kg min. Distance: 135 mm max. distance: 585 mm speed: 1-20 1/min Measuring resolution: 0.001 ° Work table (W x D): 750 x 650 mm load capacity: 1000 kg travel X/Y/Z: 525x400x450 mm Filter system: Cartridge filter: Filter area: 16 m² Total volume: 400 l Dimensions (WxHxD): 1356x2653x2284 mm Weight: approx. 4400 kg Technical data Erowa Automation: X-axis: 1200 mm Z-axis: 1050 mm C-axis: 350 ° A-axis: +/-180 ° Duedpfxetdkkue Ad Isp B-axis: +/- 90 ° Y-axis: 1.1-18.74 m (METER!) Transfer weight: max. 130 kg The system is also equipped with 2 magazines Dismantling, loading and shipping can be organized throughout Europe for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: repair required (used), Year of construction: 1989, functionality: limited functionality, !!! SPECIAL OFFER!!! For sale are 2 active milling machines of the brand Hermle and the type UWF 801 Price for both machines in a package One machine has an error when moving in Y, the 2nd machine is missing relays. The idea would be to make one machine out of 2. The value of a functional machine would be approx. 10,000 € What makes the machine special is its active control, which allows it to set feeds that stop at a predetermined level. The machine is easy to operate and yet efficient, which makes it ideal for the do-it-yourselfer but also for industry. x-travel: 500 mm Dusdot Ifm Nepfx Ad Isp y-travel: 430 mm z-travel: 400 mm Spindle holder ISO: SK40 Control: TNC 114 Spindle head swivels left and right: right/left = 90° ° Vertical quill stroke: 80 mm Speed range: 40 - 2000 / 18 step rpm Feed rate:: X+Y: 4 - 1600 steples mm/min Feed rate:: Z: 4 - 1000 steples mm/min Rapid traverse: X+Y: 1.6 iand Z: 1 m/min Table size: 800 x 395 mm Spindle drive: 3 kW Weight approx.: 1300 kg Transport dimensions LxWxH: 1.6 x 1.5 x 1.8 m Chip collection tray Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), feed length X-axis: 400 mm, feed length Y-axis: 200 mm, feed length Z-axis: 400 mm, For sale is a conventional milling machine of the brand Deckel and type FP2 The machine is in very good condition, has been overhauled by the Harich company (date unknown) and is ready for immediate use Technical data Tool holder: SK 40 Travel X/Y/Z: 400 / 200 / 400 mm Speed range: 40 - 2000 rpm Vertical spindle travel: 60 mm Horizontal spindle travel: 100 mm Feed rates: 8 - 400 mm/rev Table size: 700 x 330 mm Motor power: 2.2 kW Connection: 400 V / 16 A plug Weight: approx. 1300 kg Duodpju Ti Akjfx Ad Isp Vice and tools are NOT included in the offer, but can be offered. On request, transportation and loading can be organized for an extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: repair required (used), Year of construction: 1987, For sale is a small milling center of the brand Maho and type 300 C The power supply unit is defective but can be repaired Technical data: YEAR OF MANUFACTURE 1987 Type: MH 300 C CNC control Phillips 432 Table: 550x275 mm Travel x/y/z : 300/350/220 mm SK 40 holder Dodpfx Adsir U H Ej Ieup Spindle speed: 20-4000 rpm Main drive: 3.3 kw Rapid traverse: 3 m/min Quill stroke: 50 mm Dimensions: 2000 x 2000 x 2000 mm Weight: approx. 1900 kg Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: good (used), Year of construction: 1994, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, For sale is a Deckel Mori 70 V gantry machining center. The machining center is ready for immediate use and fully functional. Technical specifications: Year of manufacture: 1994 Grundig Dialog 112 control system X travel 700 mm Y travel 550 mm Z travel 500 mm SK 40 chuck mount Brushless AC servo motor Drive type: Continuously variable 0-8000 rpm Feed speed: Continuously variable 10000 mm/min Table size: 900 x 550 mm Table load: 0.8 t Machine weight: approx. 7.2 t Knoll scraper conveyor belt Internal cooling system Rapid traverse x/y 30000 mm/min Rapid traverse z 20000 mm/min Transport and loading can be arranged throughout Europe upon request for an additional charge. Prices plus VAT. Duedev T U Udopfx Ad Isp Viewings available by appointment. Contact us; our team will be happy to assist you. Trade-ins or exchanges are available! Machine Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, visit our website.

Condition: used, Year of construction: 2005, x-travel 620 mm y-travel 420 mm z-travel 400 mm Control Heidenhain TNC 124 turning speed range - spindle 50 - 4.000 U/min transmission ratio 2 drive capacity - spindle motor 6 kW tension force 10 kN swivellable manuell +/-45 ° max. tool diameter 125 mm max. tool weight 6 kg table surface area 400 x 800 mm T-slots 5x14x80 max. table load 400 kg feed speeds X/Y: 0 - 6.000 mm/min feed speeds Z: 0 - 4.000 mm/min Duedpfx Adeylcpqj Iep rapid traverse X/Y: 6 m/min rapid traverse Z: 4 m/min total power requirement 11 kW weight of the machine ca. 2 t dimensions of the machine ca. 2,9 x 3,5 x 2,0 m Includes: Heidenhain TNC124 point-to-point control Electrical documentation available Coolant system 2 work lights Machine vise Various tool holders Various SK40 tools Enclosure with 2 sliding doors available, pictures to follow

Condition: excellent (used), Year of construction: 2020, Sub-spindle, Y-axis, C-axis FANUC 31i B5-NT-SmartX control Turning diameter max 305mm Turning length -870 mm Main-spindle speeds 6'000 rpm Sub-spindle speeds 6'000 rpm Djdpfxjyla Spe Ad Ijup Milling head B-axis +/- 95 ° Tool changer with 72 positions Turret head: 24 positions with 12 driven positions Tool presetting device Workpiece pick-up attachement Tool breakage control device Bar loader Misc. accessories MARCELS MASCHINEN CH

Year of construction: 2025, condition: new, Multifunctional CNC drilling and milling center for all types of profiles. Suitable for processing aluminum and PVC profiles for doors and windows. The multifunctional CNC (Computer Numerical Control) drilling and milling center is a high-tech machine designed to perform a wide range of metalworking operations. This type of equipment combines functions such as drilling, milling, reaming, tapping, and sometimes even turning, providing high precision and efficiency in machining various materials including metals, alloys, wood, and PVC. Key Features and Advantages - High precision and repeatability: Thanks to digital control, CNC centers can perform complex, multi-stage operations with micron-level accuracy. - Versatility: Multifunctional centers allow rapid reconfiguration for different operations and can machine parts of different sizes and shapes. - Automation: These machines are automated, which significantly reduces the need for manual intervention and the risk of errors. Duedpfx Adow T Slde Ijp - Reduced production costs: By consolidating multiple operations into a single machine, equipment, time, and labor costs are optimized. - Capability to process complex shapes: CNC centers can machine intricate geometrical parts that would be difficult or impossible to achieve with manual machines. Main Components - Control system (CNC): Manages all movements and operations of the machine according to the pre-set program. - Worktable and spindle: The area where the workpiece is mounted, and the spindle that drives the tool. - Tool magazine: Stores and manages the tools for automatic changes during operation. - Cooling and lubrication system: Maintains optimal working temperature and protects both tools and material. Applications Multifunctional CNC centers are used in various industries, including automotive engineering, aviation, electronics, and mechanical engineering, wherever high-precision machining of parts and complex geometrical shapes is required. These machines deliver high productivity, reduced setup time, and significantly improved quality control, making them indispensable for modern manufacturing processes. Brand new!!!

Condition: good (used), functionality: fully functional, feed length X-axis: 1,000 mm, feed length Y-axis: 750 mm, feed length Z-axis: 600 mm, For sale: the MAHO MH 1000 milling machine shown in the photos, manufactured by the German company MAHO. Duedpfsvmhtyex Ad Iep The machine is operational, connected, and ready for work. Its condition is assessed as very good. The machine can be connected and test-run on site. Loading the machine is included in the price. TECHNICAL DATA: - Rapid feeds on all axes - Mechanically clamped tool - X axis travel: 1000 mm - Y axis travel: 750 mm - Z axis travel: 600 mm - Spindle taper: ISO 40 - Quill with automatic feed - Swivel head - Table dimensions: 740 x 1250 mm, triple-swivel - The table has an additional manual travel on the Y axis of ±200 mm - Table swivels 360 degrees - Table swivels longitudinally and transversely ±30 degrees - Speeds from 32 to 1600 RPM - Machine dimensions: 3500x2500x2500 mm - Weight: approx. 5500 kg

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Duodpfxjw Nklhe Ad Iep Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition

Condition: ready for operation (used), Year of construction: 2004, Make: MAZAK Type of machine: INTEGREX 300-3ST Year of manufacture: 2004 Control system: Mazatrol 640 CNC-Steuerung Machine's weight: 14.200 kg Tool holder: Capto C6 x-travel: 530 mm y-travel: 200 mm z-travel: 1.065 mm Speed range: 4.000 U/min Cutting diameter: 300 mm Turning length: 1.000 mm Overall dimensions: 6.500 × 3.000 × 3.200 mm Dedpfjyh I Rvjx Ad Ijup Tool turret - slots: 80 Pl.

Condition: ready for operation (used), Year of construction: 2008, Make: MAZAK Type of machine: INTEGREX 300-4ST Year of manufacture: 2008 Control system: Mazatrol Matrix Machine's weight: 13.900 kg Tool holder: Capto C6 x-travel: 530 mm y-travel: 200 mm z-travel: 1.065 mm Speed range: 4.000 U/min Cutting diameter: 300 mm Turning length: 1.000 mm Overall dimensions: 6.500 × 3.000 × 3.200 mm Dedpjyh I Tdofx Ad Ioup Tool turret - slots: 80 Pl.

Condition: reconditioned (used), Year of construction: 1991, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, feed rate X-axis: 3,600 m/min, feed rate Y-axis: 3,600 m/min, feed rate Z-axis: 3,600 m/min, quill stroke: 80 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 40 rpm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 4 m/min, rapid traverse Z-axis: 4 m/min, table length: 530 mm, table width: 900 mm, rotational speed (max.): 4,000 rpm, rotational speed (min.): 40 rpm, table load: 450 kg, Equipment: rotational speed infinitely variable, The machine is designed and built to be very stable and robust. Thanks to its excellent accessibility, it is extremely user-friendly. The machine can also be moved manually using mechanical handwheels. CNC Path Control DECKEL Dialog 11 Easily programmable 3D path control with color graphic support, dialogue guidance for cycle input, contour path calculator, editor functions, clear program and tool management, and the possibility of parallel programming. Travel paths X / Y / Z: 560 / 500 / 450 mm Tool holder: SK40 DIN 69872 Clamping system: Hydromechanical clamping system SK40 with drawbar according to DIN 2080 or DIN 69872 Working spindle: Vertical and horizontal. Manually retractable quill in vertical direction 80 mm. Milling head: Manually swivels +/- 90° Speed range: 40–4000 rpm, geometrically stepped Direct-drive gearbox for maximum torque / milling performance at the working spindle Feed rate: 2–3600 mm/min, infinitely variable feed Dsdeyn Dq Iopfx Ad Ijup Rapid traverse: 4000 mm/min Angle table: 530 x 900 mm, max. load capacity 450 kg

Condition: excellent (used), Year of construction: 2008, operating hours: 50,236 h, functionality: fully functional, travel distance X-axis: 2,360 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 9,000 rpm, For sale is a 6-axis machining center from AXA, model VHC 2-2360-XTS / 50. The machine is in good condition and fully functional, has only been used for light machining such as aluminium. Of particular note: Each of the two NC tables allows clamping of workpieces up to Ø1,100 mm – see drawing. A fixed milling table can also be mounted. A high-speed spindle insert SK50 is available for this machine. Technical data: Year of manufacture: 2008 Controller: Heidenhain iTNC 530 Machine on: 50,236 hours Spindle hours: 16,319 X-axis: 2,360 mm Y-axis: 600 mm Z-axis: 800 mm Spindle taper: SK 50 Spindle power: 56 kW Torque: 355 Nm Tool changer: 52 positions on 2 chains NC rotary tables (2 pieces) Type: SKH-NC 7/T Table plate: Ø 630 mm Max. load: 750 kg Clamping: Hydraulic Dimensions: Dujdpfx Asyi Er Aed Iep 5,650 mm x 3,700 mm x 3,200 mm Weight: approx. 22,000 kg Equipment: IC coolant system with 50 bar high-pressure pump, belt filter, Heidenhain RCN 729 measuring system, 3D probe Renishaw OMP 60, electronic handwheel, 2x Visiport (inspection windows), chip conveyor. Tool holders are not included in the offer, but can be supplied at additional cost. Transport and loading can be organized throughout Europe on request for an additional fee. Prices are subject to VAT. Inspection possible by appointment. Please contact us – our team is happy to assist you. Trade-in or exchange possible! Machinery purchase and sales – BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell your machine? For further information or to contact us, please visit our website.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 24,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,500 mm, spindle speed (min.): 5 rpm, spindle speed (max.): 6,000 rpm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, quill diameter: 145 mm, HEIDENHAIN TNC 530 CNC Control WORKING TRAVEL: X-axis longitudinal travel of the column: 24,000 mm Y-axis maximum vertical travel of the head: 3,000 mm Z-axis transverse travel of the head: 1,500 mm RAM DIMENSIONS: 430 x 530 mm SPINDLE: Spindle taper: ISO 50 Spindle speed, rpm: 5–6,000 - at constant torque, rpm: 5–310 - at constant power, rpm: 310–6,000 - maximum torque (S1/S6): 900/1,150 Nm FEED ON ROLLER GUIDES: Rapid traverses (X, Y, Z): 40,000 mm/min Working thrust: 20,000 N MOTOR POWER: Spindle motor (continuous duty S1-100%), AC: 29 kW Spindle motor (duty cycle S6-40%), AC: 37.5 kW Equipped with: - Automatic tool changer with 60 positions Duedpfxsydd S Ro Ad Iep - Automatic head changer - HURON automatic birotary head TA100 – 2.5°/2.5° – 29 kW – 4,000 rpm – 1,000 Nm - Spindle extension, diameter: 145 mm - Chain-type chip conveyor - Through-spindle coolant at 20 bar - External spindle coolant at 30 bar TABLE PLATES: No. 8 plates, each 6,500 x 1,500 x 350 mm (H) Total: 26,000 x 3,000 x 350 mm (H) USED MACHINE YEAR: 2007

Condition: reconditioned (used), Year of construction: 1976, Universal Tool Milling Machine Manufacturer: DECKEL Model: FP 1 Year of manufacture: 1976 – workshop inspected Machine No.: 51720/08 Geometric acceptance with inspection protocol Accessories: - 3-axis digital readout K+C Arbah-M, new - Fixed table 600 x 210 mm (T-slot 12 mm) - Vertical milling head SK 40 Dusdpoyipmwefx Ad Isp with draw thread S 20 x 2 - Coolant system - Operating manual Used as seen, without warranty The machine technically corresponds to the standard at the time of manufacture.

Year of construction: 2010, condition: used, functionality: fully functional, Elumatec SBZ 130 CNC-controlled milling machine, 7,000 mm version 8 clamps Dedpfxoyr Rubj Ad Isup Tool changer with 8 positions on the milling head

Condition: good (used), Year of construction: 1996, functionality: limited functionality, machine/vehicle number: 19046, total height: 2,200 mm, total length: 2,980 mm, total width: 1,470 mm, overall weight: 4,000 kg, - 1 used 5-axis CNC tool grinding machine from Schneeberger with coolant filtration system Duedpfx Aoyag I Hsd Ijp - Model Gemini PSM, year 1996 with Fanuc Quinto control - General overhaul by Schneeberger in April 2016, hardly used since - Travel: X 360 mm / Y 270 mm / Z 270 mm, center height 210 mm, workpiece holder ISO 50 - Limited functionality (buffer battery faulty) - Documentation available, on-site inspection possible

Condition: used, Year of construction: 2001, CNC Fixed Bed Milling Machine CORREA type CF 17 D Year of construction: 2001 Travel X: 2000 mm Travel Y: 800 mm Travel Z: 800 mm Numerical Command: HEIDENHAIN 426 Spindle: ISO 50 Spindle speed: from 20 to 3000 RPM Table size: 2000 x 700 mm Max weight on table: 3500 kg Spindle motor: 17 kW Dimensions (L x W x H): 5300 x 2900 x 2800 mm Weight: 9 T Dusdpfx Asyrf H Ejd Isp

Condition: new, Year of construction: 2026, C6090 milling plotters are professional precision devices designed for small-sized processing of materials such as: wooden materials, chipboard, plywood, MDF, OSB, or PVC plastics, plexiglass, dibond, light metals. Training at CORMAK headquarters included in the price for each machine. Optional - the latest UCanCAM V13 software in Polish language version Drive Motors used to drive high-power machine tools provide appropriate acceleration and speed in individual directions. In the X and Y axes, high-quality toothed bars work, praised by users, which ensure high durability and precision, The Z axis is driven by a high-quality ball screw. All axes move on rail guides. The machine is equipped with a drive height sensor Spindle Brushless high-class spindle, which is characterized by durability. Liquid cooling system The spindle design uses high-quality machine bearings, characterized by very quiet operation and ensuring increased durability. Tool height measurement sensor - included. The spindle speed range is from 6000 to 24000 rpm. Software OPTIONALLY The latest UCanCAM V13 software in the Polish language version (the software provides the ability to import files from Corel, Autocad, etc. File import/export, text editor and input and many other functions) The software allows for quick and easy design of elements, which the program then converts to the so-called G-code. It is also possible to import ready-made files from other programs. The machine is equipped with a function of remembering the last G-code path (In the event of a power failure or interruption, it starts working from the last point without losing time or material.) DSP control Digital Signal Processing The DSP controller of the machine has its own processor and RAM, which ensures trouble-free operation and simple operation of the machine. The controller ensures smooth operation of the device and accuracy during processing. After a power loss, there is no need to initialize the program from scratch. The memory built into the controller allows the machine to work without having to load the program every time. Technical parameters Spindle 2.2kW / 3.0kW / s1 / s6 24000 rpm. inverter Workspace 600x900x300 mm DSP control Program resolution 0.001 mm Power supply 230V Weight 310 kg Machine dimensions width 1370x length 1720x height 2050 mm Duodpfjwcd Tmjx Ad Iop Table height 750 mm Linear guides Drive transmission toothed rack (Z axis - ball screw) Axis drives stepper motors UCanCAM V13 software in Polish language version (option) Equipment leveling feet, screws, keys, training cutter package, ER32 collets - 1/8 inch, 1/2 inch, and 5-6 mm Unloading and machine location on the customer's side. Power plug on the customer's side due to different sockets 16A / 32A Price is only for machine itself

Condition: new, Year of construction: 2026, CORMAK C2141 ATC PREMIUM (2100 x 4200 mm) is a dynamic and precise milling plotter based on components from global manufacturers, suitable for the toughest tasks, which works great in industrial production. Constant quality control and components used in the machine construction guarantee high quality processing of materials such as: wood, wood-like boards, MDF, OSB, PVC, HPL, plywood, plexiglass, dibond, carbon, alucobond. 1. Work table Sectioning table with four independent vacuum sections, made of rigid and durable HPL boards, Each section has holes to which negative pressure from the vacuum pump is supplied through a system of pipes, The main holes in the vacuum table have plugs that allow you to attach different formats of materials, 2. HQD spindle Brushless spindle from a renowned high-class manufacturer with a power of 9 kW , powered by an inverter, with overload protection. Milling electrospindle equipped with an innovative AIR cooling system . Adapted to automatic tool changing, which shortens machining time due to the lack of downtime associated with manual cutter change. 3.Drive Energy-saving high-end drives Leadshine servo drives with 1500W power and high holding torque (Double on the Y axis) controlled by the NK-105 G3 digital controller , they ensure excellent quality machining while maintaining high working speeds in individual directions. Brushless servo motors driving the X and Y axes transmit power via high-quality planetary gears. The Z axis, where positioning precision is crucial, is driven by a reinforced ball screw. The movement of the gate along the X and Y axes is carried out by means of HIWIN guide rails and helical gear wheels, which guarantee many years of trouble-free operation and are made of high-quality hardened and tempered steel. 4. Construction The construction of the sliding gate is made of cast iron, which achieves incredible rigidity and absorbs vibrations generated during processing very well. 5. 8-tool magazine + tool measurement sensor The machine is equipped with an 8-position linear tool magazine, a set of ISO30 cones and ER32 collets The set includes holders: ISO30 and sleeves for mounting tools in the following dimensions: 1/2" - 6 pcs.; 1/8" - 2 pcs.; 3-4mm - 2 pcs.; 5-6mm - 4 pcs.; 7-8mm - 2 pcs.; 9-10mm - 2 pcs. 6. Vacuum pump and suction foot (optional) 4 independent vacuum sections. The pneumatically operated extraction foot is located at the spindle and allows for the connection of any chip extraction system, maintaining the cleanliness of the processing, safety and at the same time maintaining the precision of the work. 7. Software, INDUSTRIAL CONTROL : Control NK-105 G3 The machine supports the latest version of CAD/CAM software. OPTIONALLY The latest UCanCAM V12 software Technical parameters Working Field 2100x4200mm Z-axis 300mm Design Arm - cast iron / table - welded steel Drives 1500W Leadshine servo drives Table T-shaped / hybrid Spindle power 9kW Spindle Air cooled HQD (oil mist optional) Spindle revolutions from 6000 to 24000 rpm Power supply 400 V, compressed air min. 8 bar Re-positioning accuracy 0.01mm Linear bearings trapezoidal rails, Hiwin trolleys Material fixing vacuum, hybrid Djdpfx Aovupu Ued Ieup Vacuum pump vacuum 2x7.5 kW (option) Software UCanCAM V12 (option) Dimensions 5070x2870x1900mm Weight 3350 kg

Condition: ready for operation (used), CNC milling center YANG EAGLE 1000 with 20-fold tool changer x / y / z 900 x 500 x 500 mm Fanuc Series O-MD Type: SMV-1000 Model: C & H-3A UNIT Duedpfxohlp Nue Ad Iop FAN: 100 VA Shipping possible throughout Germany and Austria. Surcharge 1000 € Sale excluding warranty.