Used Cnc Punching Machine for sale (83,244)

Condition: good (used), Year of construction: 1990, operating hours: 39,687 h, functionality: fully functional, Bruderer BSTA 200 High-performance automatic punching press. max. pressure: 200 kN 20 T Speed range: 100 - 600 spm Year of construction: 1990. Feed BBV on the left side. Adjustable stroke: 8; 13; 19; 25; 32; 38; 44; 51 mm Ram height adjustment: 51 mm Dimensions of the clamping plate (clamping plate): 510 x 400 mm Bed opening: 400 x 160 mm Max. distance of the tool width between the columns: 410 mm. Connected load: 36 kVA Power 400 V 50 Hz Control voltage: 24 V Machine dimensions: H 2540 x W 1661 x D 855 mm Machine weight: approx. 3100 kg Switch cabinet and control system. Including all original technical documentation. Fpodpfxstraado Ag Reb Also high-speed presses in stock: Mabu, Schaal, Bihler and other Bruderer models.

Condition: excellent (used), Year of construction: 2005, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 35,000 m/min, rapid traverse Y-axis: 35,000 m/min, rapid traverse Z-axis: 35,000 m/min, workpiece weight (max.): 200 kg, total length: 500 mm, total width: 400 mm, table load: 200 kg, rotary table diameter: 280 mm, Coolant system Filtration tank HR 410 Handwheel iTNC530 controller 1e owner machine X - Travel: 600mm Y - Travel: 450mm Z - Travel: 400mm A - Axis: 110° B - Axis: 360° Table Length: 500mm Table Width: 400mm Table load: 200 Table Ø: 280mm Feed rate X-Axis: 35000mm/min. Feed rate Y-Axis: 35000mm/min. Feed rate Z-Axis: 35000mm/min. Feed rate A-Axis: 10Degrees/min Feed rate B-Axis: 15Degrees/min Spindle Taper: 40ISO/Bt/Mk Power on spindle: 15kW Speeds / ranges: 18000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Fpjdsx R S Smepfx Ag Reb Chip conveyor: Yes Coolantsystem: Yes Length: 3500mm Width: 3500mm Height: 2800mm Weight: 6600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2008, 1 used CNC turning/milling center Gildemeister type TWIN 65 RG 2 year 2008 with Siemens 840 D Maximum turning length (travel in the Z axis) 650 mm Maximum turning diameter over bed 250 mm Maximum length of travel in the X-axis 300 mm Maximum feed speed X-axis 30 m/min Maximum feed speed Z axis 30 m/min Maximum main spindle power 35 kW Spindle diameter 65 mm Minimum main spindle speed 20 1/min Maximum main spindle speed 5000 1/min Lathe length 7000 mm Lathe width 4700 mm Lathe height 2500 mm Lathe weight 10 t Machine equipment Y axis Irco loading magazine ILS RBK 1200 mm Workpiece pick-up device Technical data Errors excepted Fpedoq T I Izepfx Ag Rsb Please note that the machine is sold without chucks, as these remain with the seller!

Year of construction: 2009, condition: ready for operation (used), General Data Measurements width 2980 Measurements depth 4000 mm Measurements height 2300 mm Machine weight 13000 kg Main Drive Main motor power 30 kw This Baykal HNC 3100x13 shearing machine was manufactured in 2009. It features a cutting capacity for St 42 at 13 mm and a cutting length of 3060 mm. Main voltage is 380/50/3 with a robust 30 kW motor. The machine's substantial weight of 13000 kg ensures stability and precision in operation. For more information about this shearing machine, please reach out to us. Fpodpfjx Imp Ujx Ag Reb Application Types Shearing

Condition: used, Year of construction: 2009, total height: 2,900 mm, Empty weight: 14.000 kg Price: On request Fpodsx Dil Iepfx Ag Rjb What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Machine available from: 2026-03-31 - Details: - └ Description: Excluding tools - Year: 2009 - Documentation available: Yes - CE certificate present: No - Serial number: 113253 - Number of milling spindles [pcs.]: 1 - Material clamp system: Pneumatic - Drilling unit present: Yes - Tool changer positions [pcs.]: 24 - System/software: SIMATIC NET - Safety feature: Door interlock switches, Enclosed fence - CNC options: Unloading system, Loading system - CNC documentation available: USB stick - Table length [mm]: 4500 - Working range X [mm]: 4500 - Working range Y [mm]: 260 - Z-axis working range [mm]: 150 - Voltage [V]: 400 - Current consumption [A]: 63 - Fuse [A]: 80 - Power [kW]: 32.0 - Transport weight [kg]: 14000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: excellent (used), Year of construction: 1998, operating hours: 17,260 h, Table size: 1000 x 500 mm Tool holder: ISO 40 Travel paths: X-axis: 800 mm Y-axis: 500 mm Z-axis: 420 mm Distance between horizontal spindle axis and table: 210 – 630 mm Distance between vertical spindle nose and table: 130 – 550 mm Table load capacity: max. 500 kg Speed range: 50 - 4000 rpm Feed rate (infinitely variable): 5 - 2000 mm/min Rapid traverse in all axes: 8 m/min Vertical milling head, swiveling: ± 90° Manual quill stroke adjustment: 100 mm Drive power: 7.5 kW Dimensions (L x W x H): approx. 3000 x 2400 x 1975 mm Weight: approx. 3000 kg Accessories / Special features: • CNC contouring control HEIDENHAIN TNC 410 • Electronic handwheel HEIDENHAIN HR 410 • SIEMENS AC servo drives • Data interface V 24 / RS 232 • Swiveling vertical milling head ± 90° right & left with 100 mm quill adjustment • Hydraulic tool clamping, vertical & horizontal, ISO 40 • Swivel-away device for the vertical milling head • Very wide speed range up to 4,000 rpm • Vibration-free operation thanks to rigid and heavily ribbed cast iron guideways • Ball screws for X, Y, and Z axes • All electrical control elements on one side, in a movable control panel • Fixed angle table with foldable chip guard • Coolant system integrated in the machine base • Hydraulic unit • Central lubrication • CE compliant Operating hours: 17,256 Spindle hours: 3,816 Image: shows brochure photo Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 Fpsdpfsxtu H Nox Ag Rsb DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 2005, Processing size: 3000 x 1600 x 180 mm High-pressure pump 60 HP / 45 kW Model E-60 Operating pressure 4,130 BAR Water consumption 4.69 liters/min. Software: Watercad-CAM Automatic cutting optimization Storage location: customer Fjdpfxexgfbqe Ag Rjpb

Condition: used, machine/vehicle number: 008356, X axis working area: 3650 mm Y axis working area: 1560 mm Working Table: Flat table Main Electrospindle power: 13 KW Number of controlled axes: 4 axes Total number of drilling spindles: 18 Fjdpox Swf Isfx Ag Ropb Total number of tool changer positions: 26

Condition: good (used), Year of construction: 1995, 1 used hydraulic punching machine Manufacturer: Mubea Type: KLH 500 / 610 Year of manufacture: 1995 - Punching force: 50 tons - Stroke: 60 mm - Punches up to Ø 30 mm in 15 mm, Ø 50 mm in 9 mm, Ø 100 mm in 4.5 mm - Throat depth: 610 mm Fedpfewxy Dgex Ag Rspb - with support table

Condition: ready for operation (used), Year of construction: 2008, total height: 2,100 mm, overall weight: 3,000 kg, travel distance X-axis: 220 mm, travel distance Z-axis: 300 mm, controller manufacturer: FANUC, controller model: 31i-Model A, General Data Measurements width 1560 mm Measurements depth 2000 mm Measurements height 2100 mm Machine weight 3000 kg Control Unit Brand FANUC Model 31i-Model A Movement X-Axis Movement 220 mm X-Axis Rapid Traverse 20000 mm/min Z-Axis Movement 300 mm Z-Axis Rapid Traverse 20000 mm/min Additional Equipment Workpiece spindle motor: 2 kW Fpodpfx Agox D Ed Hj Reb This VOUMARD VM 110 CNC T was manufactured in 2008. A robust internal grinding machine, it features a GE FANUC Series 31i-Model A control, a maximum grinding diameter of 150 mm, and a depth of 80 mm. It supports a longitudinal travel (Z-axis) of 300 mm and a cross travel (X-axis) of 220 mm. Consider the opportunity to buy this VOUMARD VM 110 CNC T internal grinding machine. Contact us for more information. Application Types Grinding

Condition: used, Year of construction: 2001, Empty weight: 5.000 kg What are Presale Items at Second Owner? Fodpfexbzg Esx Ag Repb Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 2001 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AL/6222 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 3 - Type milling table: Beam table - Tool clamping system: HSK-F63 - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 18 - └ Vertical drilling spindles [pcs.]: 6 - Tool changer positions [pcs.]: 14 - System/software: Xilog plus - Safety feature: Bumper guard - Voltage [V]: 400 - Current consumption [A]: 32 - Power [kW]: 26.0 - Transport weight [kg]: 5000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: good (used), Year of construction: 1994, CNC Table Type Boring Mill DS SCHARMANN SOLON 4 with SIEMENS 840 C CNC Control Spindle diameter: 125 mm Spindle taper: SK 50 Fodex Rqi Repfx Ag Rjpb Table size: 1200 x 1000 mm Travels: X-axis: 2000 mm Y-axis: 1600 mm Z-axis: 1400 mm W-axis: 600 mm Speed range up to 3000 rpm Table load capacity up to 5000 kg The tool and pallet changers are no longer in operation! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: refurbished (used), Year of construction: 1985, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 5 rpm, feed length X-axis: 1,200 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 700 mm, feed rate X-axis: 1,000 m/min, feed rate Y-axis: 1,000 m/min, feed rate Z-axis: 1,000 m/min, total width: 4,000 mm, San Rocco Horizontal Boring Machine Fully overhauled San Rocco horizontal boring machine, originating from a high-end aerospace manufacturing facility. The machine is equipped with a Siemens SINUMERIK 840D CNC control system with SIMODRIVE 611 drive technology. The machine is fitted with modern digital drive systems and is designed for high-precision multi-axis machining in continuous operation. It was fully overhauled in 2024, including brand-new telescopic covers on all axes, as well as numerous additional essential refurbishments to the hydraulic system, CNC components, hoses, seals, and related assemblies. Travels X-axis (longitudinal): 1,200 mm Y-axis (cross): 2,000 mm Z-axis (vertical / spindle axis): 700 mm Spindle Data Boring spindle diameter: 100 mm Tool interface: ISO 50 Milling spindle diameter: 185 mm Spindle axial travel: 700 mm Feeds and Rapid Traverses Automatic feeds (spindle and vertical axis): 2 × 1,000 mm/min Rapid traverse (spindle and vertical axis): 5,500 mm/min Distances Minimum spindle height above table: 0 mm Maximum spindle height above table: 1,500 mm Maximum distance from spindle nose to table center: 1,850 mm Spindle Speeds Torque range: 5 to 14 rpm Continuous power range: 15 to 1,450 rpm Number of gearbox ranges: 4 Speed ranges: 6–51 / 49–160 / 140–460 / 440–1,450 rpm Table Data Rotary table size: 1,100 × 1,300 mm Longitudinal travel: 1,200 mm Cross travel: 2,000 mm Table Feeds Automatic feeds X and Y: 1,000 mm/min Rapid traverse X and Y: 5,500 mm/min Table Rotation Continuous rotation: 30 to 100 degrees per minute Rapid rotation: 5,000 degrees per minute Drive System Siemens SIMODRIVE 611 Fjdpfjx Rhlcex Ag Rjpb E/R module 36/47 kW LT modules 108 A and 2 × 25 A Lifting and Transport Data Group 1 Steel bar Ø 70 mm, length 1,600 mm Steel bar Ø 70 mm, length 2,400 mm Four spacer rings for lifting slings Four steel slings Ø 22 mm Weight approx. 12,500 kg Group 2 Two steel slings, minimum Ø 18 mm Weight approx. 3,500 kg Group 3 Manual lifting Weight approx. 1,300 kg Condition The machine is in very good technical condition and can be inspected and tested under power by appointment.

Condition: used, machine/vehicle number: 008388, X axis working area: 3086 mm Y axis working area: 2185 mm Working Table: Flat table Main Electrospindle power: 15 KW Number of controlled axes: 4 axes Total number of drilling spindles: 18 Total number of tool changer positions: 20 Fpsdpfox Swfzex Ag Rob

Condition: excellent (used), Year of construction: 2003, Deep Hole Drilling and Milling Machine TBFZ 1600 CNC Year of manufacture: 2003 X-AXIS TRAVEL: 1600 MM Y-AXIS TRAVEL: 1200 MM Z-AXIS TRAVEL: 500 MM W-AXIS TRAVEL: 1200 MM B-AXIS TRAVEL: 360° (Rotary table) * Table size (LxW): 1500x1500 mm * T-slots: 5x DIN 650-22 h12, 150 mm spacing * Tool clamping: hydraulic * Electrical connection: 400 V, 50 Hz * Compressed air connection: rated flow rate 7000 l/min, operating pressure: 6 bar Fedpexz Aygefx Ag Rjpb * Botek driller optionally available * Feed drive: brushless AC servo motors * Feed rate: 0-20000 mm/min * Rapid traverse: X 20000 mm/min, Y+Z 20000 mm/min * Manual mode: 20000 mm/min * Setup operation: 0-2000 mm/min

Condition: good (used), The machine is in good technical condition. Maximum spindle torque: 1200 Nm Fjdpfx Agsx Ai Igs Rjpb Maximum feed force in X, Y, Z axes: 25,000 N Maximum workpiece weight: 10,500 kg Total table area: 1000 x 5000 mm Number of T-slots: 7/140 mm Width of central slot: 22H7 Longitudinal travel (X-axis): 5000 mm Cross travel (Y-axis): 1000 mm Vertical travel (Z-axis): 1400 mm Minimum distance from horizontal spindle axis to table clamping surface: 150 mm Minimum distance from vertical spindle face to table clamping surface: 125 mm Spindle taper: ISO 50 Spindle diameter at front bearing: 100 mm Tool taper: ČSN 22 0434 (DIN 69871 - A 50) Drawbar force of clamping mechanism: 16,100 N Swivel range of horizontal spindle: bi-directional +177.5° to -180° Swivel range of vertical spindle: bi-directional +177.5° to -180° Usable power of main drive motor: 22 kW Spindle speed range: 11 to 2500 rpm Number of speed steps: stepless Feed range: 1 to 5000 mm/min Rapid traverse in Y and Z axes: 10 m/min Rapid traverse in X axis: 15 m/min Maximum approach speed to reference point: 3000 mm/min Spindle head rotation about machine cross axis: +177.5°, ±180° The machine has undergone partial general overhaul (GO).

Condition: good (used), Blumer Atlas D-18 M Label punching machine Professional Swiss-made machine. Perfect condition, like new. Blumer is a leader in label punching. 100% functional and ready for production. This is the model currently in production. Technical specifications: Maximum format: 150x180mm Min. format: 24x45mm Cycles: 18-6/min Fodpfsx Hqmnox Ag Rjpb Stack height: 120mm Weight: 600kg The machine is equipped with a hydraulic quick-action unit. Tail on the delivery. Die positioning module, scrap cutting knives, and a die.

Condition: used, CNC punching machine AMADA ARIES 245 with CNC control AMADAN 04PA Fpsdpfx Aox Rp Uxeg Rsb Punching capacity: 20 t Machine weight: 7,500 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: ready for operation (used), Year of construction: 2007, PAMA ACC 200/500 CNC boring machine Control - Siemens 840 DSL Fully retrofitted in 2007 Spindle diameter - 200 mm Spindle speeds - 1,500 rpm X axis travel - 9,000 mm Y axis travel - 4,150 mm Z axis travel - 1,700 mm W axis travel - 1,150 mm V axis table feed travel - 2,500 mm B axis - 360° / 1.5 rpm Ram dimensions - 530 x 600 mm Milling spindle diameter - 250 mm Spindle taper - ISO 50 Spindle motor power - 75 kW Rapid traverse - 10,000 mm/min Feeds - 6,000 mm/min Table PAMA TGM 2025 - 2,500 x 2,000 mm, travel 2,500 mm Table load capacity - centered balance 40 tons Video of machine under power available! Fpjdjx Nw Uqjpfx Ag Rsb Floor plates supplied with the machine! Machine still under power!

Year of construction: 2001, condition: ready for operation (used), overall weight: 3,750 kg, total height: 1,600 mm, product length (max.): 4,700 mm, number of axes: 6, General Data Machine weight 3750 kg Measurements height 1600 mm Main Drive Number of axis 6 Bending length 3000 mm Dimensions Machine Length 4700 mm Fpedpfsx Hbk Rex Ag Rob This 6-axis PEDRAZZOLI Bend Master 42 MRV IMS CNC was manufactured in 2001. It features a max tube diameter of 42 mm, a min tube diameter of 6 mm, and a max bending radius of 270 mm. With a power of 22 kW and a bending length up to 3000 mm, consider the opportunity to buy this PEDRAZZOLI Bend Master 42 MRV IMS CNC roll bending machine. Contact us for more information about this machine. Application Types Bending

Condition: used, Year of construction: 2016, functionality: fully functional, We are offering this used schoen + sandt 5300 A bridge die cutting machine, year of manufacture 2016 Machine type: 5300 A Fodpfsx S Ed Sjx Ag Rjpb Cutting table: 1700 x 1050 mm / 1000 KN If you have any questions or require further information, please feel free to send us a message or call us.

Condition: like new (used), Year of construction: 2007, Retrofitted: 2024 Numerical control: HEIDENHAIN TNC-i530 Technical features Dimensions Table dimensions: 4500 x 2000 mmNumber of T slots: 11T slots dimensions: 22 mm Traverses of axis X axis traverse: 4000 mmY axis traverse: 3000 mmZ axis traverse: 1000 mmVertical capacity (VC): -10 / 990 mmDistance between columns: 2435 mm Milling head Auto-indexing differential head (UAD - 0,1º)Tool clamping system: HydraulicTaper nose: ISO50Speed range: 6000 rpmSpindle power: 30 kW Feedrates Feedrate: 5000 mm/minRapid feedrate (X / Y,Z): 15000 / 12000 mm/min Weight and dimensions Maximum weight on table: 10000 KgMachine weight approximate: 45300 KgMachine dimensions approximate: 10975 x 4768 x 5095 mm Accesories GuardingAutomatic tool changer: ATC30Coolant: External internal high pressure through spindleElectronic handwheel: HR-410 Sales conditions Guarantee: 6 months mechanical spare partsSale price (Ex Work): On request View all technical features Fsdpfsugbn Eex Ag Repb

Condition: like new (used), Year of construction: 2004, Retrofitted: 2025 Fjdpfeu T S Dwsx Ag Repb Numerical control: NUEVO/NEW HEIDENHAIN TNC-i640 Technical features Dimensions Table dimensions: 5600 x 2000 mmNumber of T slots: 13T slots dimensions: 22 mm Traverses of axis X axis traverse: 5000 mmY axis traverse: 3250 mmZ axis traverse: 1000 mmVertical capacity (VC): 450 / 1450 mmDistance between columns: 2700 mm Milling head Auto-indexing differential head (UAD - 0,1º)Tool clamping system: HydraulicTaper nose: ISO50 (DIN69871)  /  Pull stud: DIN69872Speed range: 6000 rpmSpindle power: 30 kW Feedrates Rapid feedrate (X / Y,Z): 7200 / 12000 mm/min Weight and dimensions Maximum weight on table: 25000 kgMachine weight approximate: 56000 KgMachine dimensions approximate: 13200 x 5425 x 5350 mm Accesories Guarding: 2 sliding doors and new perimetral wire-mesh security omatic tool changer: OptionalChip conveyor: 1 transversal hinge typeElectronic handwheel: New HR-510Coolant: External internal high pressure through spindle Sales conditions Guarantee: 6 months mechanical spare partsPrice and sale conditions: On request View all technical features

Condition: like new (used), Year of construction: 2004, Retrofitted: 2024/2025 Fpodpfeugbpisx Ag Rob Numerical control: HEIDENHAIN TNC-530 Technical features Dimensions Table dimensions: 4000 x 2000 mmNumber of T slots: 11T slots dimensions: 22 mm Traverses of axis X axis traverse: 4000 mmY axis traverse: 3000 mmZ axis traverse: 1000 mmDistance between columns: 2530 mm Milling head Universal manual UM40Tool clamping system: HydraulicTaper nose: ISO50Speed range: 20 - 3.000 rpm (5.000 rpm direct exit)Spindle power: 30 kW Feedrates Feedrate: 7000 mm/minRapid feedrate (X / Y,Z): 15000 / 12000 mm/min Weight and dimensions Maximum weight on table: 10000 KgMachine weight approximate: 45300 KgMachine dimensions approximate: 10926 x 4768 x 5110 mm Accesories GuardingExternal coolant. Electronic handwheel: New HR-510 Sales conditions Guarantee: 6 months mechanical partsSale price (Ex Work): On request View all technical features

Condition: like new (used), Year of construction: 2007, Retrofitted: 2025 Numerical control: NUEVO/NEW HEIDENHAIN TNC-i640 Fpjdpfjxaqh Nsx Ag Rsb Technical features Dimensions Table dimensions: 4500 x 2000 mmNumber of T slots: 11T slots dimensions: 22 mm Traverses of axis X axis traverse: 4000 mmY axis traverse: 3000 mmZ axis traverse: 1000 mmVertical capacity (VC): 240 - 1240 mmDistance between columns: 2500 mm Milling head Auto-indexing differential head (UAD - 0,1º)Tool clamping system: HydraulicTaper nose: ISO50Speed range: 6000 rpmSpindle power: 30 kW Feedrates Feedrate: 5000 mm/minRapid feedrate (X / Y,Z): 15000 / 12000 mm/min Weight and dimensions Maximum weight on table: 10000 KgMachine weight approximate: 35500 KgMachine dimensions approximate: 10975 x 4770 x 5345 mm Accesories Guarding with 2 doors and new perimetral safety fenceAutomatic tool changer: ATC-60 (sale option with no ATC)Chip conveyor: 1 transversalElectronic handwheel: New HR-510Coolant: External internal high pressure through spindle Sales conditions Guarantee: 6 months mechanical spare partsSale conditions: On request View all technical features