Used Cnc Universal Cylindrical Grinding Machine for sale (65,183)

Condition: used, Year of construction: 1982, grinding diameter:250 mm grinding length:650 mm centre height:125 mm internal grinding spindle rev.-stepless:9500-50000 U/min workpiece speeds -stepless:50-10000 mm/min grinding head swivelling:90 Grad max. dia. of grinding wheel:400 mm spindle bore:30 mm grinding length - plunge feed:80 (100) mm max. grinding depth by internal grinding:ca. 170 mm max. bore diameter to be ground:90 mm feed speeds:240 mm/min max. workpiece weight:80 kg required cooling water:36 l/min Fpjdpfocxxubsx Aa Neg centre distance:650 mm distance of workpiece spindle-taper cone:960 mm drive capacity - spindle motor:6,25 kW connected load:ca. 10 kW total power requirement:8,5 kW weight of the machine ca.:3,4 t dimensions of the machine ca.:3,9 x 2,5 x 1,85 m with Studer control, electric/hydraulic drive, variable speed, tailstock with fine adjustment and hydraulic back feed, work piece headstock with increased precision, table air , hydraulic removable dressing device, radius-dressing device, Hydro-Cyclone filter, automatic grinding wheel-balancing device, automatic dressing cycle with speed compensation

Condition: used, Year of construction: 1987, machine/vehicle number: 6004.01, grinding diameter:350 mm grinding length:1000 mm centre height:175 mm workpiece weight:120 kg power capacity:5,5 kW Fpjdsdmppqopfx Aa Neg turning speeds:max. 25000 U/min control:FMS 5-88 weight of the machine ca.:3,5 t precision grinding machine with SONY digital display, coolant system, electronic hand wheel, separate electrical cabinet, emergency cut-off

Condition: good (used), Jones and Shipman Suprema 650 M Easy Universal OD/ID Cylindrical Grinder s/n SO19131, w/ J&S PLC Control, 12" Swing x 25" Centers, Swivel Wheelhead w/ OD & ID Capability, Internal Spindle, Hydromation Coolant System, Heidenhain DRO, Workholding NOT Included Fedpsywfyqsfx Aa Nopg

Condition: used, Year of construction: 2008, operating hours: 18,937 h, functionality: fully functional, machine/vehicle number: 67, STUDER S145cnc INTERNAL GRINDING MACHINE Series 65 Year of manufacture: Sep. 2008 Operating hours: 18,937 Price: €118,000 This is a service-recorded machine: it undergoes an annual maintenance check by STUDER, with all wear parts replaced as needed. The machine has been used exclusively for producing precision spindles, achieving tolerances up to max. 0.0003 mm. The machine operates with grinding oil. Initially used in single-shift operation, in the last two years it has been working two shifts. The machine is in use and available for inspection upon request. The machine is being sold due to new equipment acquisition. Extras: Spindle adapters and flanges available upon agreement. Specifications: • Swing diameter ..... 448 mm • Center height ..... 225 mm • Workhead (chuck spindle head) with roller bearings, mounting taper ISO50 – Fodsyw Nuxjpfx Aa Njpg spindle nose Ø110 mm, spindle bore Ø50 mm • Machine bed made from Granitan S103 • Worktable swiveling range: +/-30° • Direct measuring system for X and Z axes • Touch-trigger probe Movomatic C25 (switching) • FANUC CNC control system 21i-TB • Portable control unit Studer PCU terminal with LCD display • Machine is currently in operation • Transport arrangements to be made by the buyer The machine is equipped with 4 spindles: one external spindle, two internal spindles, and one internal spindle with longitudinal positioner. RPM – one spindle: 60,000; two spindles: 42,000; one spindle: 5,000 Type: Fischer

Condition: used, Technical details: grinding diameter: 250 mm grinding length: 1000 mm max. workpiece weight: 300 kg grinding wheel width: 150 mm Grinding wheel/diameter x bore x width: 600 x 305 x 80 mm folded disc width: 200 mm Fpodpfeyzptijx Aa Nog spindle taper: MK 5 tailstock taper MT: 5 sanding headstock rotation: 45° speeds:: 1050/1240 U/min longitudinal feed of the table: mind. 1 mm table speeds: 0,05-5 m/min traverse movement of the grinding headstock : 415 mm traverse movement of the grinding headstock with aut. infeed: 2 mm For grinding : 0,15 mm aut. infeed at table dead center: 0,005-0,05 mm for grinding : 0,0005-0,01 Self-infeed at grooving : 0,01-5 mm/min Quick adjustment of the grinding headstock : 60 mm grinding wheel motor: 19 kW total power requirement: 22 kW weight of the machine ca.: 5 t

Condition: excellent (used), functionality: fully functional, workpiece weight (max.): 10,000 kg, grinding length: 6,000 mm, grinding diameter: 800 mm, Cylindrical Grinding Machine STANKOIMPORT 3M196 / 6000 Fsdpfxey Hrr Ss Aa Nepg We offer a heavy-duty cylindrical grinding machine from STANKOIMPORT, model 3M196 / 6000. The machine is designed for machining large and heavy workpieces and is suitable for heavy industry, energy sector, shipyards and shaft production. 🔧 Technical data: Manufacturer: STANKOIMPORT Model: 3M196 / 6000 Grinding length: 6000 mm Grinding diameter: 800 mm Center height: 410 mm Max workpiece weight: 10,000 kg Grinding wheel diameter: 750 – 900 mm Spindle taper: Morse 6 Dimensions (L x W x H): 12,000 x 3,000 x 2,500 mm Machine weight: 45,000 kg 📌 Description: Heavy-duty and rigid construction Suitable for continuous industrial operation Ideal for long shafts and large components Proven and reliable design 📍 Location: Poland 🚚 Terms: Price: on request Machine can be inspected Loading included Transport can be arranged

Condition: ready for operation (used), Year of construction: 1994, Studer S30-1 Fpedpfx Aasy Rmxuo Neg Year of manufacture: 1994

Condition: used, Year of construction: 1992, Technical details: Fpjdpfsy Nk Hyjx Aa Nsg grinding diameter: 50 mm grinding length: 100 mm centre height: 100 mm centre distance: 200 mm

Condition: used, Make: DISKUS-WERKE, Model: ModuLine DS 300 SO, Year of manufacture: 2013, Machine No.: 2219, Control system: Siemens, Model Sinumerik 840D sl, 2 spindles, spindle distance 210 mm, max. speed approx. 4000 rpm, W-tool spindle / grinding spindle 2000 rpm, max. workpiece diameter 100 mm, max. workpiece height 40 mm, 8-position tool turret, manufacturer Sauter, model 0.5.480.516, tool holder type Capto C5, workpiece automation device, manufacturer DVS, model Moduline, transfer robot manufacturer Epson, PLC system control by Siemens, display with Simatic Panel Touch, coolant system by Knoll, type KF150/950, paper band filter, chip conveyor by Knoll, type 225S-2/170 Fedpjx Ahg Usfx Aa Nopg +++ Note: This machine is part of an online surplus sale! +++

Condition: used, Make: BUDERUS, Model: CNC235, Year of manufacture: 2007, Machine no.: 9030, Control system: Siemens brand, Type: Sinumerik 840D sl Powerline, 2 workspaces, 2 cross slides, X/Z traverse path, 2 spindles, Speed, C-axis workpiece spindle: 3,000 [rpm], High-frequency internal grinding spindle: (51,000 [rpm]) (for grinding arbor), Max. feeds Z 30 m/min, X 90 m/min, Max. workpiece diameter: 100 mm, Max. workpiece length: 50 mm, 2x 8-position tool turret, Tool holder: Capto C5, Workpiece automation with drag conveyor system and gripper, Coolant system, Paper band filter, Oil separator, Manufacturer: Mahle, Type: LGA601, Oil mist extraction, Recooling unit, Manufacturer: Hydac, Chip conveyor, Manufacturer: Astos +++ Note: This machine is part of an online surplus sale! +++ Fpsdpfx Ajx Ahivea Neg

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Kellenberger URS175/800 (2 units) Year of manufacture: 2013 and 2014. Capacity: Centre height 175 mm; Centre distance 1000 mm; Grinding length 800 mm Accessories: Coolant system, internal coolant supply (IKZ), paper filter, MARPOSS probe, MOVOMATIC measurement control, internal grinding attachment, balancing unit, RS‑232 interface. Based on the documentation (2012 offer), I have summarised the technical data for the KEL-VISTA URS 2-3 175 / 800 GE FANUC 21i: Key Data · Centre height: 175 mm · Centre distance: 800 mm (note: 1000 mm in price list) · Grinding length: 400 mm (note: 800 mm in another table) Connection Data Fpjdpfxey Nz E He Aa Njg · Supply voltage: 3x400 VAC / 50 Hz or 3x460 VAC / 60 Hz · Power consumption: max. 25 A · Compressed air requirement: min. 6 bar / approx. 2.5 m³/h · Coolant system: 80 l/min at max. 3 bar / 160 l/min at max. 1 bar Ambient Conditions · Room temperature: max. 40 °C · Air humidity: max. 75 % Weights & Floor Load · Weight (centre distance 800 mm): approx. 3,500 kg · Floor load: 8,000 N/m² Axes · X-axis (grinding slide): AC drive Fanuc, direct ball screw, resolution 0.1 µm · Z-axis (table): AC drive Fanuc, resolution 0.1 µm · Swivel range (table): 6° for 175/800 Grinding Head (Type URS) · Wheel dimensions: 450 x 63 x 203.2 mm (right) · Tool holder taper: 1:10, Ø 63 mm · Drive power: 6.0 kW · Speed range: 875 – 1,900 rpm · Peripheral speed: max. 40 m/s (T2: v constant) · Swivel system: Hirth toothing (1° indexing), swivel range -210° / +10° · Internal grinding device: belt-driven, own water-cooled motor (stepless) Workpiece Spindle (Standard) · Mount: MK 5 / external taper DIN 55026 size 5 · Roundness (plunge grinding): Delta R < 0.4 µm · Capacity in overhung position: 100 Nm, max. 80 kg · Capacity between centres: max. 100 kg · Speed range: 1 – 800 rpm (AC drive, programmable) · Positioning accuracy: < +/-0.5° · Swivel range: -10° / +100° Tailstock (Note) · Quill riveted, in preloaded ball guides · Hydraulic or pneumatic tailstock pressure selectable Control · Type: GE FANUC 21i (3-axis CNC, conversational support)

Condition: good (used), Year of construction: 2002, functionality: fully functional, grinding diameter 20-35mm X-travel 450mm, Z-travel 200mm exhaustion device, extinguishing system weight ca. 4000kg Fjdsy Ix Ezepfx Aa Nepg

Condition: good (used), Year of construction: 1986, CNC universal milling machine Make DECKEL Type: FP5NC Bj.1986 control DIALOG 4 Fjdpfjy H Ifbsx Aa Njpg Traverse paths: X710mm Y600mm Z500mm Clamping table : 1000mm x 550mm Tool clamp: SK40 Feed speed programmable: 2 ... 3600 mm / min Speed: 18 ... 6300 rpm Spindle power: 7.5KW machine in stock.

Condition: good (used), Internal Item No.: 26045 Universal Tool Grinding Machine Deckel S11 + Comprehensive accessory package Fsdpfx Ajy Ibfqja Nepg + Optics with digital display + Extraction unit + Machine lamp Center height, universal dividing head: 170mm Center height, tailstock: 120mm Maximum workpiece diameter between centers: 338mm Maximum workpiece diameter for cantilever mounting: 600mm Maximum length between centers: 950mm Grinding stroke: 190mm Cross adjustment of tool carrier: 100mm Height adjustment of grinding head: 325mm Maximum grinding wheel diameter: 125mm The machine is fully functional and, by arrangement, can be inspected under power on over 500m² of heated warehouse space.

Condition: used, functionality: fully functional, Maximum workpiece length: 500 mm Fpedswhp D Uspfx Aa Nsg Minimum workpiece length approx.: 5 mm Maximum workpiece length for plunge grinding: 50 mm Max. grinding diameter without steady rests: 100 mm Max. diameter: 240 mm Workpiece Swivel: 90° Grinding spindle slide Min./max. swivel: 30° Min./max. transverse movement including 300 mm quick adjustment: 100 mm Wheel diameter after rotation 1st degree: 320 - 400 mm 2nd degree: 260 - 320 mm Max. workpiece weight between centers: 60 kg Max. workpiece weight in chuck: 20 kg Max. workpiece weight in faceplate: 20 kg 8 workpiece spindle speeds: 45 - 500 rpm Min./max. Tilt: 12° Min./max. longitudinal travel: 2 - 500 mm Infinitely variable table travel: 0.5 - 5 m/min Handwheel adjustment: 2 and 20/rev

Condition: used, functionality: fully functional, Grinding length: 973 mm Center height: 250 mm Maximum worktable tilt: +6° / -9° Centering center: MT5 Maximum grinding head travel: 100 mm Maximum grinding head tilt: +45° / -30° Maximum grinding wheel diameter: 500 mm Speed range: 32 - 600 rpm Maximum workpiece weight between centers: 400 kg Maximum internal grinding device grindable bore: 160 mm Machine weight: approx. 5,000 kg Fpjdpfx Ajwhp Dnea Nsg

Condition: good (used), Studer S30-12 cylindrical grinding machine TECHNICAL DATA Main dimensions Center height: 125 mm Center width: 400 / 700 / 1025 mm Fpjdpovca Izefx Aa Neg Largest longitudinal slide path: 400 / 700 / 1000 mm Longitudinal slide Table speed: 50 - 5000 mm/min Reversing delay: 0-6 s Smallest automatic travel: 1.5 mm Max. stroke: 400 / 700 / 1020 mm Max. Table inclination: 12 / 30 / 78° Cross slide Swivel range: +- 45° Quick adjustment: 40 mm Feed path with handwheel: 20 mm Largest plunge depth: 1.7 mm Sanding headstock Grinding wheel diameter x width x bore: 450 x 80 x 203 mm Speed: 1340 / 1500 1625 / 1800 / 2000 / 2200 rpm Coarse adjustment: 210 mm Workpiece headstock Swivel range: 0 - 90 Speed range: 30 - 675 rpm Mounting cone: Morse 5 Collets: W25 Tailstock Mounting cone: Morse 3 Adjustment travel of the center: 30 mm Total power requirement: 5 / 8.25 kW No liability is assumed for the correctness, completeness and up-to-dateness of the information.

Condition: good (used), ESTARTA 312 Centerless cylindrical grinding machine TECHNICAL DATA AND SCOPE OF SUPPLY TECHNICAL DATA Workpiece, diameter: 1-5 - 75 mm Grinding wheel diameter: 400 mm Grinding wheel width: 160 mm Working stroke: 0-1 mm Work feed: Stepless Speed, grinding wheel: 1300 rpm Weight: approx. 4000 kg Dimensions: 1.5 x 0.4 x 2.0 m SCOPE OF OFFER Including: (non-exhaustive list): Grinding wheel (mounted), regulating wheels (mounted), grinding pads, complete operating documentation. Fpeder Igy Ropfx Aa Nsg Exact scope of offer according to photo gallery No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: excellent (used), AGATHON 150 SL2 Centerless cylindrical grinding machine TECHNICAL DATA Working wheel: Diameter: 150 mm width: 50 mm Bore: 50 mm Regulating disk: Diameter: 100 mm Width: 50 mm Bore: 40 mm Workpiece diameter: Minimum: 0.1 mm Maximum: 12 mm Max. Length for plunge-cut grinding: 49 mm Weight: 750 kg Connected loads: 3 X 380 V / 50 Hz Compressed air: 5-6 bar Dimensions: Machine: 1000 x 500 x 880 mm Electrical cabinet: 1550 x 540 x 420 mm Coolant tank: 750 x 550 x 700 SCOPE OF OFFER U.A: (list not exhaustive): Grinding wheels regulating wheels Spare flange mandrel Grinding pads Complete operating documentation Fpjdpfx Aor Hdi Asa Nsg Exact scope of offer according to photo gallery We assume no liability for the accuracy, completeness and up-to-dateness of the information provided.

Year of construction: 2003, condition: excellent (used), Schneeberger DMR Gemini CNC tool grinding machine TECHNICAL DATA Control: GE Fanuc 160, 5 axes simultaneous Software: Schneeberger Quinto Measuring system X,Y and Z axis: 0.1 μm A-axis: 0.0001° C axis: 0.0001° Grinding head Power: 15 kW speed: 50 - 10`000 rpm spindle nose: HSK 50 Max. wheel diameter: 250 mm Max. Number of grinding wheels: 6 Linear axes X-axis, travel: 380 mm feed speed: 20`000 mm/min resolution: 0,0001 mm gear ratio: 1 : 1 Power: 1,0 kW / 3 Nm Y-axis, travel: 300 mm feed speed: 5`000 mm/min resolution: 0,0001 mm Gear ratio: 24 :4 Power: 1,6 kW / 8 Nm Z-axis, travel: 280 mm feed speed: 20`000 mm/min resolution: 0,0001 mm gear ratio: 1 : 1 Power: 1,0 kW / 3 Nm Rotary axes C-axis: 210 ° Speed: 72 ° / s Resolution: 0,0001 ° Power: 1.6 kW / 8 Nm C` axis: +- 180 ° Speed: 90 ° / s Resolution: 0,0001 ° Infeed: Hydraulic A axis: +- 360 ° Speed: 225 ° / s resolution: 0,0001° Power: 1,0 kW Nose: ISO 50 Center height: 210 mm Dimensions and weight Length: 1700 mm Depth: 2270 mm Height: 2260 mm Weight: 8`000 kg Fedpfsmqni Aox Aa Nepg We do not guarantee the accuracy, completeness and timeliness of the information.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: GD12002, workpiece weight (max.): 150 kg, grinding length: 1,000 mm, grinding diameter: 360 mm, overall weight: 4,700 kg, TECHNICAL DETAILS Max. grinding diameter: 360 mm Max. grinding length: 1,000 mm Max. workpiece weight: 150 kg MACHINE DETAILS Fpjdpfxey A Nl Ue Aa Njg Main drive power: 5 kW Dimensions & Weight Dimensions (L x W x H): 3,030 x 2,250 x 2,030 mm Weight: 4,700 kg EQUIPMENT PLC controlled Tailstock Work spindle Grinding spindle with flange and grinding wheel Internal grinding device Wet grinding system Electronic handwheel Work lamp Center point Chuck Manual

Condition: used, Year of construction: 2006, grinding diameter 250 mm grinding length 1000 mm Control Kavalir K 51 peripheral speed 25 - 45 m/sec Fpodpex I Sigofx Aa Njg max. workpiece weight between centres 80 kg voltage 400V AC 50 Hz control voltage 24V AC/DC current -Sicherung für Zuleitung 35 A weight of the machine ca. 3,8 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: good (used), Year of construction: 2014, Ref. -No.: 10553 Manufacturer: HANDTMANN / BAVIUS Type: HBZ Trunnion 120 Year of construction: 2014 Type of control: CNC-Steuerung Control: Heidenhain TNC 640 Storage location: Halberstadt Country of origin: Germany Machine-No.: 200XXXXX X-Travel: 1270 mm Y-Travel: 1100 mm Z-Travel: 900 mm Table Height: Ø 1200 mm Table Load: 2000 kg Max. Tool Weight: 20 kg Max. Tool Length: 90 x 200 / 24 x 400 mm Max. Tool Diameter: Ø 130 mm Tool Taper: HSK 100 Numbers Of Tools In Magazin: 40 Tool Piece Magazine With: 140 Pcs./pcs. Spindle Turning Speed - Stepless: 14.000 RPM Max. Torque: 15000 Nm Rapid Traverse X-Axis: max. 60 m / min Rapid Travel Y-Axis: max. 60 m / min Rapid Traverse Z-Axis: max. 60 m / min Machine length: 7500 mm Machine width: 5500 mm Machine Height: 3500 mm Weight Of The Machine Ca.: 26 t Rapid traverse C-axis: max. 25 RPM Rapid traverse A-axis: max. 20 RPM A-axis (swivel axis): - 30 / + 120 ° C-axis (rotary table axis): 360 ° Further information: - Horizontal machine, Y-axis arranged vertically - Machine stand designed as a welded construction - set up on height-adjustable precision wedge shoes, chip tray with cooling lubricant device, for external splash water cooling capacity: approx. 400 liters, with clean water pump, LP circuit, approx. 40 1/min at approx. 5 bar and rinsing nozzles on the Z-axis and/or the spindle - Complete safety housing Fjdpfox Hn A Tex Aa Njpg - Stainless steel interior lining - Work area lighting - Manual loading door to the work area with polycarbonate safety window with glass front panel - Side viewing window to the work area with polycarbonate safety pane with glass front pane - Maintenance area freely accessible - HSK 100 hollow shank taper - Tool clamping via springs, tool release hydraulically - Tool clamping control - Cone cleaning - incl. spindle orientation The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 1998, Ref. -No.: 10548 Manufacturer: MONFORTS Type: RNC 5 A17 Year of construction: 1998 Type of control: CNC-Steuerung Control: Monforts Fpodpfxsxmd T Es Aa Nog Storage location: Halberstadt Country of origin: Germany Machine-No.: 303XXXX Chuck diameter: 250 mm Centre Distance: 1080 mm Spindle Diameter In Front Bearing: 100 mm Spindle head according to DIN 55027 (size): Gr. 8 Circumferential diameter over radial slide: 290 mm Max swing diameter: 500 mm travel of the cross slide: 265 mm Tailstock outside diameter of the quill: 80 mm Tailstock maximum quill stroke: 160 mm Tailstock inner cone: MK 5 Type Material flow max.: 70 mm Turning Speed Range: 2 - 2800 rpm Further information: The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 2001, Distance between centres: 600 mm Centre height: 180 mm Max. grinding diameter: 355 mm Min/max Z-axis feed rate: 0.01 / 15 m/min Z-axis resolution: 0.5 µm Min/max X-axis feed rate: 0.01 / 10 m/min X-axis resolution: 0.5 µm Grinding wheel left side: 500 x 40 x 203 mm Peripheral speed of grinding wheel: 45 m/sec External grinding spindle drive power: 10 kW Workpiece spindle speed: 0-1000 rpm Workpiece headstock taper: MK 5 Tailstock centre taper: MK 4 Cylindricity adjustment: +10 / -4 degrees Fpodpsy Dz R Sofx Aa Neg CNC control: SIEMENS 840 D Total connected load: 28 kW Machine weight: 5.2 t