Used Corrugated for sale (313)

Year of construction: 2007, condition: good (used), • Model: BOBST Autoplatine® SPanthera 106 LER • Machine Type: Automatic flatbed die-cutting machine with stripping and blanking • Manufacturer: BOBST • Category: High-performance die-cutter for folding carton & packaging • Year of Manufacture: 2007 • Production Status: "Machine under power" _____ Format & Substrate Capabilities • Max. Sheet Size: 760 × 1,060 mm • Min. Sheet Size: approx. 350 × 400 mm • Max. Cutting Size: 745 × 1,055 mm • Gripper Margin: approx. 8–10 mm • Paperboard Thickness: 0.1 – 2,000 g/m² (from paper to heavy board) • Corrugated Board: up to N-flute / F-flute (depending on tooling) • Max. Cutting Pressure: up to 260 t (BOBST Autoplatine standard) _____ Production & Performance • Maximum Mechanical Speed: up to 9,000 sheets/hour • Automatic Register System: Included • Blanking Capability: Yes (LER = Logistics, Extraction, Removal = full blanking section) • Stripping Section: Fully automatic 3-frame stripping • Non-Stop Functionality: Dedpfxexzr Hps Afpjun o Non-stop feeder (continuous pile logistics) o Non-stop delivery (automatic pile change)

Condition: good (used), Year of construction: 2015, operating hours: 7,800 h, functionality: fully functional, machine/vehicle number: TEK05/2015, type of input current: three-phase, sheet thickness steel (max.): 1 mm, sheet thickness (max.): 1 mm, total width: 840 mm, total length: 15,000 mm, total height: 153 mm, feed length X-axis: 46,000 mm, feed length Y-axis: 2,000 mm, input voltage: 380 V, working width: 2,000 mm, infeed width: 1,500 mm, control cabinet length: 1,500 mm, control cabinet height: 1,000 mm, control cabinet width: 800 mm, feed rate X-axis: 700 m/min, workpiece weight (max.): 163 kg, product height (max.): 1 mm, input current: 380 A, power: 150 kW (203.94 HP), coil weight: 10,000 kg, HIGH GROOVE SHEET PROFILING LINE (Corrugated Metal Sheet ribs 53/85/135/153 mm) Profile Type: H53 mm / H83 mm / H135 mm / H153 mm Sheet Metal Profile Thickness: 0.75 mm - 1.25 mm Minimum - Maximum Profile Length: 1500 mm - 15000 mm Manufacturer: TEK MAK Year of Construction: 2015 Condition: Very good condition for rolls for profiling 53, 85, 135, and good condition for rolls for profiling the 153 mm rib. Dujdpfx Aeuannxsfpon Components of the Line: Hydraulic Uncoiler, 10-ton capacity Profile Forming Machine Mobile Guillotine Stacking Table Control and Command Panels

Condition: used, L: 950, W: 550, H: 600 (mm). Dedpfx Afsx Aht Uepoun Product: Stacking box steel. Type: Fixed construction. Version: With four closed walls. Material: steel. Walls: corrugated steel plate. Floor: profiled steel. Euronorm (mm): none. Colour: various. Surface treatment: rusty. Internal length (mm): 770. Internal width

Year of construction: 1990, condition: used, functionality: fully functional, Type: Die Cutter Manufacturer: TMZ, Spain Model: D-4500 Year: 1990 Djdoxnzpmjpfx Afpjun Max sheet format 1300 x 900 mm Cardboard from 150 to 1500 gr. Corrugated cardboard max thickness 7 mm Length 4500 x width 2500 x height 2500 mm Weight 16000 kg

Condition: used, Used Xante Excelagraphix 4200 for sale. Mechanically functional. The printer is currently out of ink and has been idle for almost a year. Print method: 5 Memjet drop on demand thermal inkjet print heads Print width: 1067 mm Ink colors: five channels per printhead: CMYKK Print resolution: 1600 dpi x 1600 dpi or 1600 dpi x 800 dpi Print speed: up to 416 pcs. (1067 mm x 609 mm sheets per hour) Sheet feed: manual Ink type: dye-based aqueous inks Ink cartridges: 5 ink cartridges (C, M, Y, K, K) - 2 liters Duedpoxhbw Refx Afpon Media thickness: corrugated material thickness up to 15.9 mm RIP: iQueue

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: 181002, working width: 2,300 mm, power of the servo motor: 2,300 W, roll diameter: 500 mm, overall weight: 1,200 kg, Equipment: documentation/manual, Used for printing on cardboard using water-based inks with a polymer plate. Suitable for printing on solid boards (min. 300Q), all types of corrugated boards, die-cut blanks (e.g. die-cut or flat-folded flap boxes), and sheets from other materials such as hardboard, plywood, etc. Technical data: - working width: 2300 mm - print length (cardboard): 1400 mm - printing drum diameter: 500 mm - cardboard thickness: 1.5 to 7 mm - minimum cardboard format: 550 x 550 mm - maximum cardboard format: 1800 x 1400 mm - adjustable output: up to 2500 pcs/h - installed power: 2.3 kW - supply/fuse: 400VAC / 16A - printer weight: approx. 1200 kg Dsdjxnxmpjpfx Afpoun - printing polymer (important!): 5 mm

Condition: used, Year of construction: 2008,   Machine Overview The ATLANTA COMBIGIOTTO 90-M is an automatic inline packer designed to collate containers and package them on a corrugated tray with film overwrap. The machine is configured for Wrap + Film on tray and operates with a straight product infeed. It is suitable for a wide container range, from 0.5 L up to 10 L, typically covering PET, glass or HDPE bottles, cans, and similar rigid containers. The unit was manufactured in 2008 and underwent a general overhaul in 2022. It is described as ready for operation. Dodpfx Aoxdnbzsfpjun Operating mode: Automatic Infeed layout: Straight infeed (inline) Packaging: Tray wrap with neutral film overwrap Format range: 0.5 L – 10 L Machine configuration: Delivered without container infeed system (to be provided by the line) Year of manufacture: 2008; Overhauled: 2022 Typical process sequence: product collation in line; tray blank pick-up and forming/wrapping around the collation; application of neutral film and sealing; discharge to downstream handling. The configuration offers robust stabilization on tray with a protective film wrap, suitable for distribution and palletizing. Key Technical Data Model: COMBIGIOTTO 90-M Brand: ATLANTA Operating condition: Ready for operation Package configuration: Wrap + film on tray Film type: Neutral Tray: Available (tray packaging configuration) Machine feed type: Straight (inline) Format capability: 0.5 L to 10 L containers Year: 2008 (overhauled 2022) Automation & Control Industrial PLC-based control with HMI for recipe handling and setpoint management (format parameters stored for repeatability). Speed control via frequency inverters/servo drives to synchronize infeed, collation, tray wrap and film application. Integrated diagnostics, alarm history and counters (shift/lot totals). Typical sensors: product presence, jam detection, film end-of-roll, tray blank level, safety interlock status. Electrical protection degree: IP54 for the electrical system and motors. Line Integration Container infeed: not supplied with this machine. The packer expects a stable, synchronized upstream supply (accumulation/spacing/dividing to be provided by the line integrator). Inline design simplifies alignment with fillers, labellers and downstream conveying. Standard interface signals (typical): machine ready, run permission, emergency stop loop, fault, upstream/downstream handshake. Detailed I/O list can be aligned during integration. Outfeed prepared for connection to downstream handling such as conveyors, inspection, or palletizing (to be defined during project engineering). Condition & Maintenance Overall status: Ready for operation. Overhaul completed in 2022 to restore full functionality.

Year of construction: 2015, condition: reconditioned (used), The Lamina GL2200 gluing machine is designed for manual and semi-automatic gluing of cardboard packaging and POS materials. In the gluing process, two types of dispersion adhesives can be used: hot and cold. The machine uses both hot and dispersion adhesives. The machine is designed for manual feeding of cut materials and materials with precision grooves. The adhesive system applies adhesive to a predetermined length and position as the material passes through the workpiece. The pressure roller system ensures a perfect grip. The equipment's maximum working width is 2200 mm, which allows gluing large-format products. Thanks to the multi-functionality of the settings, the materials being glued can have different thicknesses. Material: Cardboard, corrugated cardboard; Maximum width: 2200mm. Technology: Semi-automatic gluing machine; Material type: Cuts. We sell only our own equipment. Can be completed with WS 2220 Working Station The Lamina Working Station is an option for the Lamina Gluer. The product is fed through the Gluer that will apply the programmed glue lines and continue into the Working Station where it is positioned on the vacuum belts. The second piece is mounted and positioned by using side lays and pneumatic stops for high quality finishing. The unit is adjustable to suit a range of products from single to multi part displays, boxes, large back supports, shelves and many more. Maximum Sheet Size: Width: 2200 mm Dodpfx Aferb Aqpjpjun

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, The used Kerres KBW 200 meat washer from 2012 is an efficient device designed for washing bins in food processing plants. The stainless steel construction, high-quality workmanship and proven German technology make the KBW 200 model ideal for everyday industrial use. The device ensures effective cleaning thanks to powerful pressure nozzles, a filtration system and adjustable operating parameters. It is the ideal solution for companies that value hygiene, reliability and media savings. Technical specifications: Manufacturer: Kerres Model: KBW 200 Year of manufacture: 2012 Capacity: 30 trays/h Material: stainless steel Power supply: 400V, 3Ph Dusdpfxowfftgj Afpjn Power: 13kW Compact design – ideal for smaller spaces: L: 3,6m, W: 1,7m, H: 2,6m Used Kerres KBW 200 corrugated sheet washer – efficient and compact device for washing containers in the food industry. Proven German quality.

Year of construction: 1989, condition: reconditioned (used), *originally pre-evacuation filler *converted to double pre-evacuation *with 30 filling valves and 10 head crown corker *including vacuum pump *In this filler 1,800 working hours were invested, that means everything was overhauled including a new ball bearing slewing ring. So the filler is in a really Duedpeni U Ruefx Afpjn perfect top condition. *equipped for one bottle type (250ml) can be converted to up to 500ml *max 265mm heigh/85mm diameter *bottle conveyors and bottle lifter + corrugated box preparation unit Lantech can be discussed for additional cost.

Condition: reconditioned (used), functionality: fully functional, Lamina System Semi automatic laminator SA 1416. In very good technical condition, after total renovation. Machine on power, can be tested. Dsdpfxowz Ev Te Afpoun Max. sheet size: width: 1400 mm length: 1600 mm Min. sheet size: width: 200 mm length: 350 mm Top Sheet: 130 to 450 g/m2 1 pts = 28,25 g/m2 Bottom Sheet: From 250 g/m2 to 10 mm (0,39”) 1 pts = 28,25 g/m2 corrugated from 0,6 - 10 mm (0,016” - 0,39”) Automatic substrate feeder with continuous sheet feeding The machine is built on a rigid frame structure made of anodized aluminum profiles. Width (with platforms) - 2350 mm, length - 4600 mm.

Condition: reconditioned (used), functionality: fully functional, The Lamina FA Blackline 1620BL is a highly accurate, high speed sheet-to-sheet fully automatic laminating/mounting machine. The machine can handle most of the existing materials in the market. The modular construction allows easy upgrading and maintainance resulting in a machine that lasts for many years. Max. sheet size: width: 1600 mm length: 2000 mm Djdpfx Aew Hrrrsfpsun Min. sheet size: width: 350 mm length: 350 mm Feeder Capacity: Top feeder: 500 mm (20”) Bottom feeder: 800 mm (32”) Top Sheet: 130 to 450 g/m2 1 pts = 28,25 g/m2 Bottom Sheet: From 250 g/m2 to 10 mm (0,39”) 1 pts = 28,25 g/m2 corrugated from 0,6 - 10 mm (0,016” - 0,39”) Air Requirements: 6 bar; 80 psi; 34 CFM, Approximately 500 L/min Can be additionally equipped with Optional Laminating Machine PB 1600 Pressure Belt

Year of construction: 2008, condition: like new (used), We sell a package of 26 cooling systems - Alfa Laval brand evaporators, all of which work on the glycol cooling system. The systems are powered at 220V or 380V or have an interchangeable power supply system according to the user's needs. The year of manufacture of the systems is 2008. We can sell also piece by piece not only as a package upon request. Commercial unit coolers designed for use in small and medium cold rooms from 10 up to 400 m³. Models designed for easy maintenance with immediate access to inspection areas. This series is available as a DX evaporator and brine unit cooler. Duodpfjg N Db Hex Afpjn Finned coil - H(C)FC Inner grooved Cu tubing ø 12 mm, triangular tube pitch - Brine Smooth Cu tubing ø 12 mm, triangular tube pitch - Corrugated Alu-fins - Fin spacings 4, 5.5, 6, 7, 8, 10 and 11 mm. • 1 to 4 AC fans, ø 250 mm up to ø 500 mm, drawing through the coil. Fan motors 230V/50-60Hz/1ph or 400V/50-60Hz/3ph in two noise levels (H/L). Motors with dynamically and statically balanced external rotors, manufactured in accordance with VDE 0530/12.84. • Corrosion resistant materials: coil frame AluZinc, casing strong and durable sheet metal, powder-coated RAL 9002. • Hinged drip tray and side covers for easy installation and maintenance. • Sufficient space for mounting of expansion valve inside the casing. • Mounting brackets allow flush ceiling mounting. • Fitted with schräder valve on the suction connection for testing purposes. • Pumped system available on request. • Stickers indicate fan direction and refrigerant in/out. • Delivery in mounting position. Coolers are mounted on wooden beams. Installation can take place with the use of a forklift. 1 AlfaCubic series (BL, GL, RL) 2 Refrigerant system (E = dry expansion, W=water/glycol, 3 Noise level (H=high, L=low) 4 Fan diameter (25=250, 35=350, 40=400, 50=500 mm) 5 Number of fans (1 to 4) 6 No. of tube rows (A=4, B=6, C=8) 7 Phases (S= single-phase, D= 3 phases Δ connection) 8 Motor voltage (230V, 400V) 9 No. of circuits 10 Packing (CR=crate) 11 Casing material (AP= powder coated, SS= stainless steel) 12 Defrost system (A= air, E= electric defrost, HG= hotgas) 13 Fin material/coating (AL=aluminium, EP= epoxy coated aluminium) 14 Fin spacing (4, 5.5, 6, 7, 8, 10 and 11 mm) 15 Tube material (Cu=copper) The evaporator coils of these units are high performance and are built-in 1/2 ”fluted copper tube and fin corrugated aluminium with gaps of 3.5, 6 and 8mm. The frame, made of aluminium sheet, is provided with protection collars. This frame has the application of thermostatic expansion valves. Regarding their exterior structure, they are manufactured in aluminium painted in high resistance RAL-9018 polyester colour. The vibrations in these machines are avoided thanks to the fact that their entire structure is compact and highly rigid. All its parts are easily removable for maintenance. These evaporators are fitted as standard with helical fans with high-performance protection grilles and are equipped with 315 or 350mm motors. diameter. Single-phase for 230V 50Hz, with a degree of protection IP-54, with external rotor and low consumption. All motors are connected to a watertight general box, according to IP-55 regulations. Finally, defrosting is carried out with 230V electric heaters built in armoured stainless steel tubes. Its vulcanized ends avoid derivations and are inserted inside the battery and the tray. They are connected to a watertight junction box. Application: Lo

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: PET09622A, Automatic winding and packaging machine for flexible spiral hoses, pipes, corrugated hoses, and hoses with an outer diameter of 8 mm to 40 mm. After winding, the coil is wrapped with stretch film and, if necessary, automatically labeled by the label printer. The total of six loading units are loaded with hose sections and wound up one after the other. The package includes a wide range of spare parts. These include: Omron servo axle drives, trailing cables for drives and valve terminals, various pneumatic components, drive belts, sensors, etc. Capacity: 60 coils/hour Min. inner diameter of coil: 200 mm Max. inner diameter of coil: 380 mm Max. outer diameter of coil: 850 mm Min. width of coil: 120 mm Dusdpjwd Emwsfx Afpjn Max. width of coil: 340 mm The technical data sheet can be found below the images; the operating instructions are attached.

Year of construction: 2011, condition: good (used), - Incl. extruder, corrugator, cutting saw, sliding saw, table, molds and die head / set Dujdpfx Afeua E H Sopjn - Suitable for single wall pipes up to 220mm

Condition: used, Year of construction: 2014, Used Automatic Wrap Around Packer Vanta 2100 bph Introductionof the Wrap Around Packer Vanta Initially, the used Vanta 2100 bph automatic wrap around packer marks a significant innovation in the bottling sector. Specifically designed to accommodate various container types like cans, glass bottles, and PET bottles, this machine exemplifies efficiency and precision in packaging. Product Types and Scope of Application Notably versatile, the Vanta 2100 bph adeptly adapts to different product sizes and types. It can manage cans, glass, and PET bottles, with diameters ranging from 50 to 110mm and heights from 70 to 370mm. Moreover, its capacity extends to the packaging size, crosswise to the conveyor direction from 140 to 450mm, and forward from 200 to 450mm. Additionally, the range for corrugated board sizes is expansive, horizontally to the conveying direction from 210 to 1500mm, and frontally from 280 to 700mm. Technical Specifications Functionally, the machine operates with a three-phase voltage of 380V and a frequency of 50 Hz. Its power consumption is a modest 13 KW, while control is efficiently maintained at 24VDC. Regarding air usage, it’s a critical aspect, with a consumption of 110L/min at 0.6MPa and 6.7 m3/h. Weighing 7000 Kg, it conforms to noise regulations, maintaining a level within 85 dB. Duodpfx Afjvgt Tropsn Positioning and Feeding For carton feeding, the setup is straightforward, ensuring a consistent and smooth material flow. This feature is crucial for maintaining efficiency and reducing downtime, assuring that each packaging phase is seamless and uninterrupted. Conclusionof the Wrap Around Packer Vanta In summary, the Used Automatic Wrap Around Packer Vanta 2100 bph stands as an optimal solution for the packaging of cans, glass, and PET bottles. With advanced technical specifications and the ability to handle diverse product and packaging sizes, this machine offers unmatched value in the bottling industry, blending versatility, efficiency, and precision into one comprehensive tool.

Condition: used, Used aseptic filling line Tetra Pak A3 FLEX 1000SQ 7000 l/h General description of the line The Used aseptic filling line Tetra Pak A3 FLEX 1000SQ 7000 l/h provides an industrial configuration specifically designed for the sterile filling of liquid food products. It particularly suits sensitive items such as UHT milk and fruit juices, which require controlled processing environments. Moreover, the system operates with 1-liter square containers and reaches a production capacity of 7,000 liters per hour. As a result, it ensures high microbiological quality standards. In this configuration, each machine plays a critical role in maintaining aseptic conditions from filling to final packaging. Dsdpfewkux Nex Afpjun Aseptic filler Tetra Pak A3 FLEX At the heart of the Used aseptic filling line Tetra Pak A3 FLEX 1000SQ 7000 l/h, the Tetra Pak A3 FLEX filler (version 100V), manufactured in 2004, performs aseptic filling using an integrated sterilization system, microbial barrier, and precise dosing mechanisms. Consequently, it processes pasteurized or sterilized products intended for extended shelf life and keeps them intact without requiring refrigeration. Furthermore, the filler maintains a sterile environment throughout the entire cycle. In addition, it ensures consistent product dosing and eliminates variability in filling performance. As a result, manufacturers can rely on this equipment to meet strict food safety requirements. Aseptic capper Tetra Pak TCA88 The line also includes the Tetra Pak TCA88 capper, built in 2006. This module applies plastic caps to filled containers using induction or mechanical systems that ensure hermetic sealing in an aseptic environment. Moreover, the capper synchronizes precisely with the filler to ensure uninterrupted operation. In contrast to conventional systems, this integration significantly reduces the risk of contamination after filling. In the same way, the TCA88 includes built-in quality control functions that verify each cap’s position and torque. Meanwhile, Tetra Pak designed the unit with safety features such as interlocked guards and error monitoring systems, ensuring full compliance with industry standards. Cardboard packer TCBP70 in this used aseptic filling line Tetra Pak The Tetra Pak TCBP70 packer, manufactured in 2007, manages secondary packaging. This automatic system forms and fills corrugated cartons using wrap-around or preformed box configurations. Similarly, it operates with fully electronic controls that allow real-time adjustment and monitoring. Therefore, the machine supports flexible packaging layouts and rapid format changes. In addition, the TCBP70 includes safety systems such as light curtains and emergency stop devices. For example, if an operator enters the guarded zone, the system halts automatically to prevent accidents. As a result, the packaging process remains both efficient and secure. Industrial applications and operational benefits The Used aseptic filling line Tetra Pak A3 FLEX 1000SQ 7000 l/h targets producers in the dairy and beverage industries who require aseptic packaging capabilities.

Condition: excellent (used), Year of construction: 2001, Ref: 10900 . 2001 Bobst SP102-BMA Foilmaster Excellent condition! Only 33,000 hours worked! Equipped with: Fully Automatic Feeder Double Sheet Control Centre Line Hot Foil Unit 2 x honeycomb chase 2 x die cutting chase 16 Independent Heating Zones Foil Advance Shafts Automatic Delivery Elevated (High Pile) Dedpfxeu Snwmo Afpeun Specification: Sheet Format Max: 720mm x 1020mm Sheet Format Min: 350mm x 400 mm Working Material Paper/Solid Board: 80-2000gr Corrugated Board: "E" and "B" - max. 4mm Gripper margin: 9-15mm Stamping Format: Max 680mm x 1010mm Max speed: 7,500 p/h

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, There are 14 pieces of steep conveyor belts with corrugated edge for sale, the price is per piece; A few data about the conveyor belt ; L: 2000mm NB: 270mm GB: 470mm Belt speed constant : 4m/min Cleat height : 30mm Corrugated edge : 30mm high Hopper in the lower area Djdpfx Afsu Smliepeun Heat resistant belt

Condition: refurbished (used), * Machine made in Germany, reelstands from Massenzana. • Single facer 2200mm, profile B, new Friese corrugating rolls. • Brand new Friese steam heads (3pcs). • New condensate valves. • Bridge • Reelstands 2PC – Massenzana • Glue kitchen, 2 tanks 2+3T • Slitter- scorer, longitude • Rewinder, role former ejector • Robust cutter (crossway) • Steam generator Zafa, heating oil 8T tanks. Duedpfokyt Iijx Afpsn • All unconditional bearings, belts etc. has been replaced (brand new).

Condition: new, Year of construction: 2025, Profile machine MZP-02 2m The MZP machine is used to corrugate sheets to ensure stiffness of thin sheets in the ventilation duct sector. Rolls made of high quality steel can roll 2mm aluminum sheets and 1.2mm black steel sheets. The machine is equipped with transport wheels that allow you to quickly change the location of the machine in the workshop. Machine Specs: Engine with editor Chain driven roller system Fully welded construction Transport possible thanks to the wheel The pressing force can be easily adjusted with the help of adjusting screws Adjustable intermediate distance between the upper and lower shafts The lower and upper rollers are made of hardened long-life steel A practical machine that can be used by people operating in the ventilation industry for many years. Djdjfwxm Depfx Afpoun Technical specification MZP-02 2000 Working length: 2000mm Range of processed sheets: 0.40 / 1.20mm Engine power: 0.37kW Length: 2240mm Width: 530mm Height: 1050mm Weight: 360 kg

Condition: new, Year of construction: 2025, functionality: fully functional, cutting width (max.): 1,600 mm, insertion height: 50 mm, cutting length (max.): 2,500 mm, input current: 30 A, input voltage: 400 V, Equipment: documentation/manual, Akonda.pl - Your Official iEcho Partner. We offer the highly versatile and powerful iEcho TK4S, the ultimate solution for automated cutting across multiple industries. Its modular design allows for perfect customization to meet your specific production needs, from sign & display and printing to packaging, textile, and industrial manufacturing. The iEcho TK4S is engineered for precision, speed, and reliability. Its robust construction and advanced features ensure high-quality results on a vast range of materials. As an official iEcho service partner, Akonda.pl provides comprehensive support, including professional installation, operator training, and ongoing technical service to keep your operations running smoothly. Key Features of the iEcho TK4S: Modular Tool Head: Can be equipped with up to three tool modules simultaneously, allowing for complex jobs without stopping. A wide range of tools is available: - Electric Oscillating Tool (EOT): Perfect for cutting soft and medium-density materials. - Pneumatic Oscillating Tool (POT): An air-driven tool with an 8mm stroke for cutting hard, dense materials up to 110mm thick. Duodoxfrh Ujpfx Afpjn - Universal Cutting Tool (UCT): For high-speed through-cutting of materials up to 5mm. - Creasing Tool (CTT): Delivers perfect creases on cardboard and corrugated materials. - High-Speed Router (RZ): With a speed of up to 60,000 RPM, it can mill and engrave hard materials like acrylic and PVC. High Performance: Maximum cutting speed of 1500 mm/s and an accuracy of ±0.1mm. Durable Construction: Built with a lightweight and strong aviation aluminum frame. Automation Ready: Can be equipped with automatic feeding and collecting systems for 24/7 production. Intelligent Camera System: Ensures precise positioning and accurate contour cutting for printed jobs. Available from Stock & Full Service Support! At Akonda.pl, we understand the importance of fast delivery and reliable support. IN STOCK NOW: We have a permanent stock of iEcho TK4S machines in the popular 2500 x 1600 mm size, ready for immediate delivery. OTHER SIZES AVAILABLE: Looking for a different dimension? Contact us to inquire about other available sizes and custom configurations. We can supply the full range of iEcho models. PROFESSIONAL SERVICE: Our team of factory-trained technicians provides expert installation, training, and warranty/post-warranty service across Europe. Why Choose Akonda.pl? Authorized iEcho Service Partner: We are your direct link to professional support and genuine spare parts. Largest iEcho Warehouse in Europe: Minimizing lead times and ensuring you get your machine faster. Proven Expertise: We have extensive experience in implementing cutting solutions for a wide variety of industrial applications. Contact us today to receive a customized offer, schedule a demonstration, or discuss how the iEcho TK4S can revolutionize your production.

Year of construction: 1970, condition: good (used), functionality: fully functional, STC-Ref:G-251-6113 Dsdpfx Afjxw H N Dspjun Bobst Standard 1300 grooving machine, Year: 1970 format: 100 x 1300 mm equipped: - creasing machine - corrugated board max. 3 - 7 mm max. - speed 100 m/min. max. - paper size max. 13,5 x 130 cm cm - paper size min. 8 x 13,5 cm - paper thickness 0,5 - 4 mm --> available: 12/2025

Condition: like new (used), Year of construction: 2022, Sunthinks HP Onepass digital printer is highly cost-effective printer specially designed for printing on corrugated cardboard. Dsdpfeu T I Npjx Afpjun * Model: Sunthinks SC1290 * Printhead type: HP heads (6 pcs) * Maximum resolution 1200x300DPI; 1200x600DPI; 1200x1200DPI * Printing speed 5/15/30 meters per minute * Print size 1290mm * Sheet size 2500x9999 Printer is almost new. Available immediately directly from owner!

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 7,000 mm, total width: 4,000 mm, total height: 3,130 mm, inner dimension height: 2,700 mm, inner dimension length: 6,900 mm, inner dimension width: 3,900 mm, Equipment: cabin, The automotive spray booth is a fundamental device in paint repair technology, enabling painting work to be carried out in safe and comfortable conditions while minimizing the negative impact on the surroundings and the environment. Dodpfexnbf Uex Afpjun Specifications: - External dimensions: 7000 × 4000 × 3130 mm - Internal dimensions: 6900 × 3900 × 2700 mm - Entrance door: 3000 × 2600 mm (three-wing design) - Service door: 640 × 1800 mm - Structure: standard steel - Heat exchanger: standard steel - Panels: EPS polystyrene - Total power: 7 kW - Installation: indoor only Cabin Wall Structure: - Thickness: 50 mm - Insulation: EPS polystyrene - Color: white Cabin Base: - Cabin mounted directly on floor/concrete surface - Installation possible only indoors Double Roof: - Upper external layer: corrugated steel panels - Inner structure: partially grated Air Circulation System (Supply System): - Jet turbine 5.5 kW – 1 unit - Airflow capacity: 20,000 m³/h - Belt-driven system - Air recirculation control: none Lighting (Side Lights): - 20 side-mounted lamps - No option for ceiling lighting Air Heating System: - Single-stage Riello G10 oil burner, 54–120 kW - Manual burner control - Heating time: approx. 20 minutes Cabin Access: - Main Doors: - Dimensions: 3200 × 2600 mm - Three-leaf door system - Service Door: - Equipped with a separate service door - Pressure locks installed Filtration System: - Air intake: Pre-filter - Ceiling filter: Main high-flow filtration Filter Specifications: - Weight: 600 g/m³ - Thickness: 50 mm - Airflow: 900 m³/h - Capture efficiency: 97% - Air velocity: 0.25 m/s - Dust holding capacity: 650 g/m³ - Max temperature: 100°C - Filtration class (EN 779): M5 - Fire resistance (DIN 53438): F1