Used Corrugated Nailers for sale (333)

Condition: excellent (used), Year of construction: 2015, operating hours: 3,590 h, functionality: fully functional, Equipment: documentation/manual, Corrugator-Shuttle system , ITIB MACHINERY INTERNATIONAL s.r.l. for producing Double wall corrugate pipe, HDPE and PP , with outside corrugated and inside smooth layer Rodpfev E Nwdjx Ag Njp Description of the equipment • Model: Corrugator F700 - shuttle system Molds: 7 dimension of mold blocks . Each dimension include 9 pairs of molds. Die head: 7 die heads - Each dimension has its own die head Cooling mandrels : 7 pcs - Each dimension has one cooling mandrel for SN 8

Condition: new, Compressed air strip nailer 6512/130 SQ for nails up to 130 mm long Applications: Carpentry, roofing, packaging, interior finishing, prefabricated house construction, timber formwork, battens, crate and pallet construction, fence construction, load securing, etc. - Single release - For paper-loaded safety strip nails - Eurocode 5 nails in accordance with DIN EN 14592 - User-friendly driving depth adjustment - Robust and powerful - Optimally silenced and balanced Technical data: - Release type Single release - Air consumption per driving operation 5.40 liters - Nail lengths from 90 to 130 mm Rjdpevcl Slefx Ag Nop - Nail diameter 3.4 - 4.2 mm - Nail series 34° safety strip nails - Magazine capacity 75 nails - Weight 6.60 kg - Length x width x height 470 x 150 x 460 mm The nailer is new and unused. Only traces of storage may be present, as the device was hanging in our showroom. You will receive an invoice with VAT shown. Payment: Prepayment by bank transfer - NO PAYPAL! If you have any questions, please do not hesitate to contact us.

Year of construction: 2017, condition: as good as new (ex-display), • Technical products + speed control • Suitable for pipes from 4.5 up to 25 mm OD Redpfx Agsvzq R Ro Njp

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, operating hours: 1,00,000 h, input voltage: 4,000 V, type of input current: three-phase, total length: 65,000 mm, overall weight: 40,000 kg, controller model: partially manual, Equipment: chip conveyor, corrugation cardboard line, C,B,E flute 1530mm units,the bobbin feet of the machine 4/3single 1 double ,glue transfer unit, heating tunel, side cutting and cut off unit, Included the gaz and air stations, glue preparing unit. all are parts of the production line. Redpfjwycrcsx Ag Nop

Condition: refurbished (used), Year of construction: 2014, number of ink cartridges: 4, color channels: 4, Durst P10-250 UV printer – refurbished German-made printer Color: 4C – 10 pl, 1000 dpi Rsdpfxoygxt Is Ag Nep Speed up to 245 m²/h Print width: 250 cm x 15 m Under Durst service maintenance 2 tables with markings - Corrugated option: suitable for cardboard as well includes software and accessories (Skies) - Dual registration Extra negotiable benefits: - Registration table for multi-plate/sheet printing - Heavy-duty roll option - Calder RIP station

Condition: used, Machine type: Corrugated sheet profiling line – new CHIEF PHENIX type Main components: - Coil lifting arm – 10-ton capacity - Decoiler – 10-ton capacity - Straightener – Dimeco - Feeder – Dimeco Microfeeder - Hydraulic punching press – SCMB 650 tons - Post-press feeder – Heilbronn - Roller conveyors - Rollforming line – 1000 mm, corrugated profile, CHIEF PHENIX new type Machine Application Rodpfx Agow Dd Hpj Nsp Automated production line for converting metal coils into corrugated sheets, including straightening, high-force hydraulic punching, continuous feeding, and rollforming. Suitable for structural and cladding applications. Key Features / Differences Modern system with high-performance units: 650-ton SCMB hydraulic press for precise punching, Dimeco straightener and Microfeeder for high throughput. 1000 mm rollforming line configured for optimized CHIEF PHENIX corrugated profile.

Condition: used, Wursten & Dietz mechanical nailer. Prepared for nailing skates. Rodjlvripjpfx Ag Nep The machine is sold as is.

Condition: used, Year of construction: 1998, We offer this used CAPE CPAMC-1P pallet production machine, year of manufacture 1998. Model: CPAMC-1P CAPE industrial line, D.L.L. Consisting of various production modules, designed for medium and long production runs. It is also possible to use a single nailing module for short runs and quicker format changes. (WE ALSO HAVE INDEPENDENT MODULES/UNITS AVAILABLE.) CAPE industrial line, D.L.L. As previously mentioned, the line consists of several production modules: 1- MODULE (Top pallet nailing unit) – Wood loader inside the first nailer, manual/automatic feed into the machine. 2- MODULE (Flipper/Turner) 3- MODULE Rjdpjyabydsfx Ag Njp – Wood loader inside the second nailer, manual/automatic feed into the machine. Next, the bottom of the pallet is nailed. 4- MODULE (Marker) HT etc. 5- MODULE (Quarter-turn unit) 6- MODULE (Corner cutter) 7- MODULE (Flipper/Turner) 8- MODULE (Stacker) 9- MODULE (Outfeed conveyor) Capacity: · 1 nailing head: 80-100 pallets/hour · Complete line: 150-200 pallets/hour · Fully automated line: 200-250 pallets/hour · Fully automated line (max): 250-300 pallets/hour If you have any questions or require further information, please feel free to contact us by message or phone.

Condition: used, Year of construction: 2024, functionality: fully functional, Corrugated line 5 ply. Fully renewd 2024, 1650mm width. Steam matic, boiler steam producing 2500 kg/h. Max pressure 19 bar. Speed up to 70 metr per min. 1.⁠ ⁠Total Length: 55 metr 2.⁠ ⁠Total Power: 150 kw 3.⁠ ⁠Frame with shaft 4.⁠ ⁠Corrugated paperboard marching: diameter of corrugated rouer, electric adjust speed moter used. 5.⁠ ⁠Double cylinder gum mounting marchine: On the adoption, inside two layers draw the gun, dascend to carry the paper lead the paper roller. Machine exists units: Hydraulic shaftless mill roll stands, Spindle ¢ 240mm, hyperbolic heavy rocker, expand chuck , multi-point brake, hydraulic drive lifting, panning left and right on the middle. Rodsw R Sknspfx Ag Njp Top paper preheat cylinders and core paper preheat cylinders. Both preheat 360 degress area. Single Facer Double Facer Blade scorer NC helical knife Glue system Gas system Steam system producing 2500 kg/h. Max pressure 19 bar. Working 12 bar. Top paper index 100g/㎡--180g/㎡ Ring crush index（N.m/g）≥8 (Water containing8-10%) Core paper index 80g/㎡--160g/㎡ Ring crush index（N.m/g）≥5.5 (Water containing8-10%) In paper index 90g/㎡--160g/㎡ Ring crush index（N.m/g）≥6 (Water containing8-10%)

Condition: used, Year of construction: 1993, machine/vehicle number: 34247, FOR SALE: HSP Lasercomb 2900 Plotter Powerful and reliable HSP Lasercomb 2900 plotter – ideal for cutting, plotting, and prototyping tasks. Specifications: Working area: approx. 1800 x 2900 mm Power: 7.5 kVA Voltage: 3x400V Comes with a dedicated computer and plotting software. Condition: The machine powers on and runs, but requires some know-how or technical skills to operate it properly. Perfect for someone familiar with plotters or looking for a DIY challenge at a great price. Whether you're in packaging, design, or industrial production, this plotter is a solid investment for the right user. Rodpfjw H D Huex Ag Njp

Year of construction: 2020, condition: new, Aluminum flat conveyor belt with substructure Redogggkljpfx Ag Nsp Working height 900mm, height adjustable using machine feet 2000mm flat Dimensions: approx. 2000 x 500 x 105mm Aluminum construction: Conveyor belt width with welded corrugated edge PVC conveyor belt with T cleats. Green conveyor belt, 2-ply, particularly cross-stable, endlessly welded with step connection * antistatic due to threads in the fabric of the running side Drive: motor approx. 0.18 kW, speed 0.4 m / sec. * controllable with frequency converter Connection 220 / 400V, 50Hz protection class IP54 Drive, motor control optional

Condition: good (used), From company liquidation: Paslode 6625/160 SQ strip nailer Rsdpfetu U Hvox Ag Nep Nails from 100-160mm 3.7-4.6mm thickness 7,1kg weight 72 nail magazine --ready for immediate use

Condition: new, Year of construction: 2024, functionality: fully functional, For sale is a conveyor belt from Mass International, it can be equipped with a chute or with a separating roller etc., just ask or write. Rjdpjgxud Ujfx Ag Njp Feed : 600 mm ascending belt : 1300 mm Delivery : 500 mm NB: 330 mm GB: 405 Hmin: 700 mm Hmax. 1000 mm Belt speed : 6m/min incl. corrugated edge

Condition: used, Year of construction: 2008, functionality: fully functional, Platform nailer. And for 2-way entry pallets without bottom boards. Automatic loaders Rjdsxt Ikbspfx Ag Njp

Condition: not inspected (used), 2 Omev-Erba nailers. Nailed bridges only for sale Redpfxjlu Hxwe Ag Nop

Year of construction: 2004, condition: refurbished (used), Continuous cycle hydraulic nailer 4 Nail Drawers Machine working Rodpfxjpy H Haj Ag Nsp

Condition: new, functionality: fully functional, Year of construction: 2024, A machine for nailing pallets with and without Reversal. The entire structure is made of molded and electrically welded steel. The Machine is controlled by a hydraulic control unit driven according to the latest state of the art Technology was built and only components of the highest quality Redpfx Aopm Ehtog Nsp Quality used. The electrical system corresponds the applicable CE standards

Condition: excellent (used), TruTool PN 200 electric hand cutting machine Product features The new TruTool PN 200 vibrating shear is mainly used for cutting C-L-U sections, trapezoidal sheet metal, etc. components. The device with a short tool for processing sheet metal with a profile depth of up to 85 mm and for C-L-U sections. Also for corrugated sheet metal. Ideal for hard-to-reach places. The working direction can be adjusted 360° easily and without tools in 45-degree steps. Minimized set-up time Replacement of punch and yoke without interruption and without tools. Unmatched speed Fast and efficient, 2.1 meters per minute at 400 N/mm2 structural steel. Application: Trapezoidal sheet metal For cutting profiles up to 86 mm deep and 132.5 / 40 mm wide. For straight and diagonal cuts. Profiles For cutting C-L-U profiles. Rodouhm E Sepfx Ag Nsp Corrugated sheet For cutting and slitting. For bevel cuts and internal and radial cuts. - MAXIMUM SHEET THICKNESSES: - MAXIMUM THICKNESS OF 400 N/MM² STEEL SHEET: 2 mm. - MAXIMUM THICKNESS OF STEEL 600 N/MM²: 1.5 mm - MAXIMUM THICKNESS OF STEEL SHEET 800 N/MM²: 1 mm - MAXIMUM THICKNESS OF SHEET METAL MADE OF ALUMINUM UP TO 250 N/MM²: 3 mm - RADIANCES: - LOWEST RADIUS: 50 mm - GENERAL INFORMATION: - OPERATING SPEED: 2.1 m/min. - NUMBER OF SHAKES AT NOMINAL LOAD: 1500 1/min. - INITIAL HOLE DIAMETER: 24 mm - RATED POWER CONSUMPTION: 550 W

Condition: good (used), Karl Tranklein PS1200 Bookbinding Shears Made in Germany. Very good condition. Cutting length approx. 1200 mm Ideal for bookbinding board, corrugated cardboard, leather, and canvas. Redpfx Ageyl Rzue Njp Front cutting stop with millimeter scale. Two additional sliding stops on the table. Feet-operated material clamp. High knives, in very good condition. Weighs over 400 kg

Year of construction: 2009, condition: good (used), Complete Textile Conveyor Belt Production Factory Machines for Sale! Don’t miss this incredible opportunity! We are offering a complete range of machines from our textile conveyor belt production factory—all in great condition and ready for immediate sale. What’s Included: All machines necessary for textile conveyor belt production Well-maintained and fully operational equipment MILLS: 1st.​Corrugate broker mills 500x1500 ​150 HP electric motor and reducer with electric panel​ 2nd. ​Twin/Double refiner mills 500x900 ​100 HP electric motor with electric panel​ 3rd.​Mill 500x1550 ​100HP electric motor and reducer ​with electric panel​ 4th.​Mill 400x1400 ​40HP electrical motor and reducer ​with electric panel​ 5th.​Mill 400x1250 ​30HP electrical motor and reducer With electric panel CALENDERS:​ 1st.​ CALENDER with 4 cylinder 400x1250 ​80 kw DC motor ​electric motor with speed control panel, ​Let off-wind up and all accecories 2nd.​CALENDER with 3 cylinder 500x1650 ​150 hp DC electic motor with speed control panel ​Let off-wind up and all accecories BANBURY MIXERS: ​ 1st.​ FARREL BRAND 80 liter banbury mixer ​150HP electric engine motor with electric panel board plus ​steel constration platform 2nd.​Knider rubber compound mixer with 70 liter capasity ​100HP electric motor and reducer BATCH OFF: Rubber compound forming machıne VULCANIZATION PRESS: ​ 1st.​VULCANIZATION PRESS ​SIZE: 1550X7650 two dayliglt ​16 pcs.(400x500) hydraulic piston cylinder with power pack platform ​let off/wind up ​strecher system with electric panel ​ 2nd.​VULCANIZATION PRESS ​SIZE: 1850x5500 ​8 pcs (400x500) hydraulic piston cylinder with power pack platform ​let off/wind up ​strecher system with electric panel ​ 3rd.​VULCANIZATION PRESS for repair and control of conveyor belts ​SIZE: 500x1400 with electric panel with two piston. 4rd.​VULCANIZATION PRESS for splıceıng of conveyor belts ​SIZE: 1100x1600 with two piston and hydraulic power pack. 5 UNIT CHAIN BUCKET: and belt conveyors for rubber compound transfering systems with electric panel. CONVEYOR BELT PREPARE AND MAKING SYSTEM: wıth 5 let off statıons 1 wınd up and electric panel. STEAM GENERATOR: wıth water tanks and electric panels presure : 8 bars capacity 1000 kg/hour LABS EQUIPMENTS: Computerızed tensile testing device Reometr computerızed rubber compuond tetsing device Hardness control device Abrassıon testing device Precısıon sensıtıve scale Rubber testıng electric lab press for rubber sheet AIR COMPRESORR: Atlas Copco 8 Bars. Rsdpfoxzzcmjx Ag Nop WATER COOLİNG SYSTEM: Water pomp and water tank

Condition: excellent (used), Year of construction: 1995, FULLY AUTOMATIC INLINE MACHINE FOR FOLDING BOXES BOBST MIDLINE 924 Speed: up to 18000 boxes per hour Nominal machine width: 2400 mm Nominal plate cylinder circumference: 1000 mm Largest printing area: 920 x 2400 mm Maximum corrugated board thickness: 10 mm Standard slitting blade thickness: 6.35 mm Average connected load: 200 kVA The line consists of: 1) Feeder Serco 2) Main machine – Flexographic printing machine midline 924 Colors: 3 // Automatic washing device 3) Slotter (Riller) Longitudinal slots // Tool is installed in the machine. 4) Punching module (e.g. for punching handles) 5) Breakout vibrating station (Material – punching residues are disposed of using compressed air) 6) Glue station Robotech 7) Folding unit Rjdpfjxrfrajx Ag Njp 8) Counting station & display The specified number of cartons will be bundled - up to here main unit - 9) Package binder / bundling machine CEMA Fully automatic strapping machine with weld seal and press for 5 mm plastic strapping, for binding corrugated cardboard bundles in the direction of travel of the flute 10) Palletizing system Martin Automatic layer formation. Roller tables receive the packages from the bundling machine. The packages are positioned using the ball bearing table according to their arrangement in the preselected position. If necessary, the package can be rotated 90° or 180° simultaneously with the lateral movement.

Condition: good (used), Year of construction: 2021, Automatic folding carton gluing machine Manufacturer: Eterna Model: Efold 1100 Elite Year of manufacture: 2021 For microflute corrugated board and carton Carton: 200-800 g/m² Corrugated board: N / E / F flute Belt speed: 320 m/min (420 m/min optional) Jogging speed: 20 m/min Redpfx Aevxvgxsg Nep Main drive: 11 kW Overall dimensions: 12.7 x 2.6 m Total weight: 7 t Maximum blank width: 1100 mm Including ERO-TE high-pressure gluing system for folder-gluer machines 4 cold glue nozzles 24226ä

Condition: excellent (used), functionality: fully functional, Pneumatic stapler. - The automatic nailer pneumatically presses fastening elements onto the bottom of the mouldings - The clamping pad automatically adjusts to the height of the workpiece - Fastening elements are supplied on coils of 10,000 to 20,000 pieces (depending on size) Redpfjx U Dpfox Ag Nop - 200 to 300 complete frames per hour (depending on size) - Nailer type NR (two boxes of 12 mm fasteners included) - Overall dimensions approximately 96 x 61 x 122 cm and weight approximately 95 kg.

Condition: new, Year of construction: 2026, total length: 1,010 mm, total width: 1,010 mm, total height: 2,010 mm, mesh size: 10 mm, We manufacture in Ukraine a heavy-duty stainless steel drying trolley, specifically designed for industrial and semi-industrial production of meat and fish snacks, raw-cured sausages, jerky, and pet treats. The trolley is fully compatible with our RK50U, SAS200, and FARS200 systems, and is ideal for use in drying chambers, smokehouses, and climate-controlled environments equipped with air dehumidifiers. The external dimensions of the trolley are 2000 × 1010 × 1010 mm. The frame is constructed from corrosion-resistant AISI 304 stainless steel, using a robust 40 × 40 × 1.5 mm profile. It features 30 levels with a 55 mm gap between each tier and is equipped with special locking mechanisms to prevent trays from falling during movement or operation. For easy maneuvering, the trolley includes six heavy-duty pendulum swivel casters (Ø125 mm), enabling rotation on the spot, even when fully loaded. Each trolley comes with 60 stainless steel trays, each measuring 900 × 500 mm. The trays are made from corrugated stainless steel wire mesh, available in 12×12 mm or 10×10 mm configurations. The wire thickness is 0.95 mm, ensuring excellent structural rigidity. Each tray includes a 15 mm high perimeter rim to promote optimal airflow and heat convection. A reusable, non-stick Teflon insert is included with each tray—perfect for sticky or soft products such as minced meat sticks, fish strips, or salami-style snacks. The total load per trolley is approximately 600 kg, with up to 10 kg of evenly distributed product per tray. The design supports both high- and low-temperature drying, and the trolley fits seamlessly into chambers with either horizontal or vertical airflow. It is optimized for easy cleaning and maintenance. This trolley is engineered for efficient moisture removal and uniform air distribution across all product levels—ensuring optimal drying performance and extended shelf life. Pricing & Availability • New set with 10×10 mm mesh and Teflon inserts: €3,500 (in stock in Vilnius, Lithuania EU) • Used set with 5×5 mm mesh, no Teflon: €2,300 (excellent condition, 7 units available) Rsdpfsrftxfox Ag Nep We deliver across the EU (Poland, Lithuania), UK, Ukraine, Australia and internationally. For technical drawings, a custom offer, or export documentation, feel free to contact us.

Condition: good (used), Year of construction: 2000, Max. Sheet format. 1420 x 1620 mm Min. sheet format: 500 x 500 mm - with MIRUS sheet feeder, type HSII - Suction belt sheet feeder, type 4R - Press belt, type 5 Redpfx Astru Hzjg Nop - Package turner (forks) with non-stop device, type 8 - Pile stacker with non-stop roller carpet, type 7 Technical data: Working width: 1500 mm Max. Sheet width: 1420 mm Max. Sheet length: 1640 mm Lamination tolerances: +/- 1.5 mm Material thickness: - Carrier material from 0.6 - 7 mm. Single-sided corrugated board only runs through the machine with a stationary flute. - An additional needle bar is required for cardboard of approx. 400 - 500 g/m². is required. - Cover sheet from approx. 180 - 400 g/m². Deviations possible depending on material properties.