Used Corrugated Nailers for sale (315)

Condition: used, maximum load weight: 28,070 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2020, next inspection (TÜV): 01/2027, loading space volume: 92 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Knapen Walking Floor semi-trailer K100 92 m³ 10 mm Floor, New MOT (TÜV) General Manufacturer: Knapen Trailers * Model/Type: K100 A5060 * Year of manufacture: 2020 * Chassis number: XPNK0C100LD071956 202003-0071956-r_order-configur? * Country of registration: Germany * Unladen weight: approx. 7,924 kg 202003-0071956-r_order-configur? * Gross permitted weight: 36,000 kg 202003-0071956-r_order-configur? * Max. axle load: 24,000 kg * Max. kingpin load: 12,000 kg (permitted in country of registration) * Volume: approx. 91.9 m³ * Tapered walking floor semi-trailer * Axle version: fixed, fixed, fixed ----Dimensions * External length: 13,670 mm * External width: 2,550 mm * External height: 4,000 mm * Internal height front: 2,690 mm * Internal height rear: 2,785 mm Kodeyrvt Aspfx Aayolr * Coupling height: 1,150 mm * Kingpin to 2nd axle: 7,750 mm * Axle spacing 1st–2nd axle: 1,310 mm * Axle spacing 2nd–3rd axle: 1,310 mm ----Axles & Running Gear * 3 x SAF 9 t Intradisc+ Integral CD off-road axles * All axles fixed * Disc brakes Ø 430 mm * 10-bolt wheel mount * Air suspension with standard control console (left in front of axles) * Lift axle, fully automatic via EBS * Including hill start assist (3x brakes) * Radio remote control for lift axle ----Tyres & Rims * Goodyear KMAX T * Tyre size: 385/65 R22.5 * Steel rims 22.5" x 11.75 * 6 wheels in total * No spare wheel ----Body * Closed sidewalls left and right * Sliding partition wall (min. ground clearance 100 mm) * Rear doors with external locking rods * One locking rod per door * Top rail made of steel, swings out left and right * Platform at front bulkhead * Ladder at front bulkhead, left and right * Standard roof bows Ø 60.3 mm (4 pcs) * Bow spacing: 3 x approx. 4,100 mm * Tarpaulin 680 g/m² (RAL 9006 white aluminium) * Tarpaulin supports, 3-position (4 pcs) * Lashing straps (4 pcs) ----Floor / Walking Floor * Cargofloor system CF-500 SL-C * Electric control * Corrugated aluminium floorboards 10 mm (21 boards) * Fixed front wall * Stainless steel plate at rear under floor ----Attachments * JOST landing legs with compensating device * Plastic toolbox, left in front of axles (1000 x 500 x 500 mm) * 30 L water tank with soap dispenser * Closed side underrun protection * Swinging mudflaps * Anti-spray mat on 3rd axle * Long ladder with extendable rear step and platform * 2 x wheel chocks left * Broom and shovel holder right ----Lighting * 6 x round LED tail lights (3-chamber) * LED fog and reverse lights * LED side marker lights (4 pairs) * LED marker lights at rear * Reflective contour marking according to EU regulations * LED work lights at rear (radio remote controlled) * LED work lights near landing legs (radio remote controlled) * LED LCG-2 switch unit ----Hydraulics / Connections * ISO-N and ISO-S connectors + 15-pin electrical socket * Knapen Trailers V1 radio remote control * Hydraulic connections centred on front wall (vertical) * Pressure line left, return right * Additional hydraulic connections at landing legs * Brake connections present * Acoustic reverse warning (manually adjustable) ----Paintwork * Body in RAL 7011 iron grey * Wheel hubs in RAL 2008 light red-orange * Chassis and underside unpainted If you have any further questions, I am at your disposal.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, total length: 1,010 mm, total width: 1,010 mm, total height: 2,010 mm, mesh size: 10 mm, Equipment: CE marking, Our client in Vilnius, Lithuania currently offers 7 complete sets of drying trolleys with trays available from stock. Can be sent one set at a time. Full manufacturer warranty is provided by HySpriz. This is an ideal trolley solution for drying products such as jerky, kabanos, fish snacks, and pet sticks. It is also suitable for fish defrosting processes and even baking applications. The mesh structure ensures excellent air convection through all product levels, resulting in uniform drying and stable product quality. We manufacture in Ukraine a heavy-duty stainless steel drying trolley, specifically designed for industrial and semi-industrial production of meat and fish snacks, raw-cured sausages, jerky, and pet treats. The trolley is fully compatible with RK50U, SAS200, and FARS200 systems and is ideal for use in drying chambers, smokehouses, and climate-controlled environments with air dehumidification. The external dimensions of the trolley are 2000 × 1010 × 1010 mm. The frame is made of corrosion-resistant AISI 304 stainless steel using a robust 40 × 40 × 1.3 mm profile. It includes 30 levels with a 55 mm spacing between tiers and special locking systems to prevent trays from falling during movement. Kledpfxerftxfe Aaysr For mobility, the trolley is equipped with six heavy-duty pendulum swivel casters (Ø125 mm), allowing full rotation even when loaded. Each trolley includes 60 stainless steel trays sized 900 × 500 mm. The trays are made of corrugated stainless steel mesh, 5x5 mm. can be optionally equipped with Teflon liners (5,8 EUR/pcs) Wire thickness is 0.7 mm for high rigidity. Each tray has a 15 mm perimeter rim for improved airflow and heat distribution. Reusable non-stick Teflon inserts are included, ideal for sticky or soft products. Total load capacity is up to 400 kg per trolley, with up to 7 kg per tray. The system supports both low-temperature dehydration and high-temperature processing. Compatible with chambers using horizontal or vertical airflow. Designed for easy cleaning, hygiene, and long service life. This trolley ensures efficient moisture removal and uniform air distribution, which directly improves drying performance and final product shelf life.

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 2,450 mm, total height: 1,790 mm, total length: 3,470 mm, Oy Foudila Ab is a company, in Kaskinen, Finland with over 45 years of experience in equipment for timber handling. For the past 15 years, we have also been active in pallet industry and have developed a lot of machines over the years for nailing, automatic timber feeding and stacking. We manufacture both standard machines and customized solutions for the customer's purposes. Foudila deck nailing machine, DNM-153 is a compact, flexible, and efficient machinery for production of decks for pallet industry to an excellent price-performance ratio. Thanks to the machine’s high production speed, user-friendly design and board magazines with large buffer, it is well suited for manufacturing both standard and special products in small and large production series with only one operator. The machine is capable of producing over 1000 decks per work shift. The machine is equipped with three nailers with magazines for large nail coils. Each nailing pattern can include 1–3 nails and can also be clinched if needed. The boards are fed into magazines with a large buffer – three cassettes for stringer/under boards and one cassette for deck/upper boards. The machine is controlled and programmed via a modern and user-friendly software interface on a 10” touchscreen, using a Beckhoff control system. Ksdpfxoyl Tr Ns Aayolr Thanks to the machine’s compact design, it requires a very small production footprint and makes installation fast and easy because the machine can be delivered fully assembled. The machine can of course be equipped with a conveyor for finished products, automatic stacker and automatic board feeder. These options can also be installed at a later stage, allowing for investment step-by-step. Please feel free to contact us for more information, technical specifications, and price details.

Condition: excellent (used), Year of construction: 2006, Introduction SUN Kodpfx Ajy D Huveayolr No. 4 flexo colors from the bottom High Board Line (n. 2 printing units year 2006 - n. 2 printing units year 2016) Vacuum transfer among the groups with belt and panel system HBL Transfer with vacuum transport year 2025 Max size 1200x1600 mm Available may 2027

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, FEEDER PLUS System Adjustable operator-side clamping team with Centerline references, with control of the presence of sheets Operator-side pushing team opposite Double sheets detector Centering and closing of the die-cutting equipment Waste trimming extraction station with quick tool clamping High stack exit Bobst CUBE II Above elevated by 35 cm. Blank preparation frame outside the machine Max format: 102x142 cm Min format: 50x70 cm Kljdpfx Ajy D Ht Seayor Min paper weight: 80 g/m² Max cardboard weight: 2,000 g Max corrugated thickness: 4 mm. Max speed: 7,000 sheets/hour Max pressure 600 Tons Available September/October 2026

Condition: used, Year of construction: 2007, functionality: fully functional, For sale is an ESKO Kongsberg DCM24 including safety enclosure. The machine is ideally suited for processing corrugated cardboard. Kodpex A Tqfsfx Aayslr The Esko Kongsberg DCM 24 cutting table is operational, in daily use, and can be inspected. It features automatic loading, cutting, creasing of each sheet via CAD file, and almost fully automated unloading. The machine, with automatic loading and unloading, requires a footprint of approximately 4.5 x 11.5 m. The included tools are visible in the photos. One tool (05278) is bent and is being sold as defective. The buyer may be able to repair it.

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 12.30 315/2, working width: 1,000 mm, Equipment: documentation/manual, Tünkers Laminating Machine Type Vorwärts 1100 Fully automatic, both carrier sheet and cover sheet are processed automatically. Suitable for a wide range of applications: corrugated board, cardboard, semi-board, fabrics, films Max. format 1000x1400 mm Min. format 200x280 mm Carrier material weight approx. 250 g/m² – approx. 5 mm Cover material weight approx. 80 g/m² – approx. 800 g/m² Up to 2,000 laminating cycles per hour Klsdpfey D D A Dox Aayor Documentation & circuit diagrams available. Incoterm FCA Oberhasli, Incoterms® 2020 – loaded on truck The machine is in operation and can be inspected.

Condition: new, functionality: fully functional, power: 30 kW (40.79 HP), Year of construction: 2025, A double roller crusher for sand making, also known as a roller sand making machine, is a processing machine that utilizes two rollers to crush and reshape coarse-grained materials such as rock, stone, and ore into finer particles. This type of equipment is commonly used in the production of construction aggregates, artificial sand, and other materials used in various industries. Here are key features and aspects of a double roller crusher for sand making: 1. Double Roller Design: - The crusher has two parallel, counter-rotating rollers that exert pressure on the material. The gap between the rollers can be adjusted to control the size of the crushed particles. 2. Crushing Mechanism: - The material is fed between the two rollers, and as they rotate, the material is drawn into the crushing zone. The rollers compress and crush the material, reducing it to the desired size. 3. Material Feed and Discharge: - The material is typically fed into the top of the crusher and is crushed between the rollers. The crushed material exits at the bottom of the machine. 4. Adjustable Gap Settings: - The gap between the rollers is adjustable, allowing for control over the final size of the crushed material. This feature is essential for producing materials of different particle sizes. 5. Roller Surface Design: - The surface of the rollers may be smooth or have corrugations to enhance the gripping and crushing action. The choice of roller surface design depends on the characteristics of the material being processed. 6. High Efficiency: - Double roller crushers are known for their high efficiency in crushing and shaping materials. The dual roller design provides a more consistent and controlled process compared to single roller crushers. Klodpeq Ngamjfx Aayor 7. Versatility: - These crushers are versatile and can be used for various materials, including hard and soft rocks, ores, and other aggregates. They are particularly suitable for producing artificial sand. 8. Dust and Noise Control: - Some double roller crushers are equipped with features to control dust emissions and reduce noise during operation, improving the working environment. 9. Application in Sand Making: - Double roller crushers for sand making are commonly used to produce fine aggregates and artificial sand. They are employed in the production of high-quality sand for construction and other applications. 10. Maintenance and Safety: - Regular maintenance is essential for optimal performance. Safety features, such as emergency stops and safety guards, are often incorporated to ensure safe operation. 11. Motor and Drive System: - A powerful motor and a reliable drive system are essential components to drive the rotation of the rollers and ensure consistent and efficient crushing. The specific design and features of double roller crushers for sand making can vary among different models and manufacturers. When selecting or using this type of equipment, it's important to refer to the manufacturer's guidelines and specifications for proper operation and maintenance.

Condition: new, Year of construction: 2026, functionality: fully functional, Robotic pallet nailing station with new Yaskawa GP225 Robot, with 3 + 3 jumbo coil nailers, easy programming. The price is indicative - for terms and conditions ask for adressed quotation. Ksdjphpcqspfx Aayolr

Condition: excellent (used), Perfect printer for clients owning already a FB7600, 200 printheads in perfect shape. Included second printer in spare parts. For further details please refer to enclosed data sheet Technical specifications Productivity Up to 500 m2 /hr (5380 ft2 /hr) or 95 full-size sheets/hr1 Kjdpfx Ajyyz D Roayslr Resolution Up to 600 dpi Media • Handling: Sheet-to-sheet ¾-automatic loading, semi-automatic and manual loading and unloading, and up to 4-sheet simultaneous printing with optional Multi-sheet Loader Kit • Types2 : Foam PVC, PVC sheets, polystyrene (HIPS), fluted polypropylene, polycarbonate, polyethylene, synthetic paper, SAV, paper, foamboard, corrugated cardboard,3 compressed cardboard, and others • Size: Rigid and flexible sheets up to 165 x 320 cm (65 x 126 in) • Thickness: Up to 25 mm, Minimum: 130 gsm • Weight for automatic loading: Up to 20 kg (44 lb) • Weight for manual loading: Up to 40 kg (88 lb) Printing • Technology: Drop-on-demand, piezoelectric inkjet • Ink types: UV-curable pigmented inks • Ink compatibility: HP FB225 Scitex Inks • Ink colors: Cyan, magenta, yellow, black, light cyan, light magenta, and optional white, orange and light black • Ink coverage: Up to 124 m2 /L (1335 ft2 /L) (at POP40 mode) • Printheads: 312 total (52 per color), additional 104 for white, orange and light black inks • Outdoor durability: Up to 2 years UV with abrasion and water resistance4 • Ink drop: 42 pl • Printable area: 165 x 320 cm (65 x 126 in) Print modes Mode5 • POP17 • POP30 • POP34 Text • POP40 • POP48 Maximum Productivity • 90 m2 /hr (967 ft2 /hr) • 160 m2 /hr (1720 ft2 /hr) • 180 m2 /hr (1937 ft2 /hr) • 210 m2 /hr (2260 ft2 /hr) • 250 m2 /hr (2688 ft2 /hr) Beds/hr6 • 17 • 30 • 34 • 40 • 48 Mode5 • POP52 • POP55 • Prod70 • Prod95 Maximum Productivity • 274m2 /hr (2948ft2 /hr) • 290 m2 /hr (3120 ft2 /hr) • 360 m2 /hr (3873 ft2 /hr) • 500 m2 /hr (5380 ft2 /hr) Beds/hr6 • 52 • 55 • 70 • 95 RIP • Software: GrandRIP+ by Caldera7 or ProductionHouse by Onyx • Input formats: All popular graphic file formats, including PostScript, PDF, EPS, Tiff, PSD, and JPG • Front end software features: Layout, step-and-repeat, color management and file sizing and cropping, edge-to-edge printing (bleed), queue, saturation control, slow loading speed, image 2, hot folder, and align to left/right and multi-sheet with optional Multi-sheet Loader Kit Physical characteristics Dimensions (w x d x h): 10.5 x 5.6 x 1.6 m (34.5 x 18.4 x 5.2 ft), Weight: 5000 kg (11,024 lb) with vacuum unit Dimensions (w x d x h) 4 x 3.25 x 2.03 m (13.2 x 10.7 x 6.7 ft), Weight: 2,700 kg (5,952 lb)

Condition: new, Year of construction: 2025, Metal siding “Soffit” production line SPM-1 auto Metal siding “Soffit” production line SPM-1 auto is an excellent solution for companies with business in metal siding and metal decor elements production for various buildings and structures. Soffit profiles are very popular to arrange gables, cornices and attics, and without perforation, they can be part of cladding building facades of various configurations. Perforation holes provide additional ventilation of the under-roof space and, therefore, optimal conditions for the roofing system. Air circulation helps to avoid the formation of condensation and extra humidity, as well as corrosion of metal tiles or corrugated sheets. Metal siding Soffit SPM-1 auto is fully automatic line. This equipment can go as a separate automatic machine, consisting of a rolling mill with an automatic system and an automatic profile guillotine, or in combination with an uncoiler. The metal uncoiler can be manual for working with metal rolls up to 800 kg or automatic, with a loop converter and speed control for working with rolls up to 1500 kg. Klodpfx Ajwwip Aoaysr Specifications: Dimensions (mm) 6650x1200x1600 Weight, kg): 2900 Drive power rolling machine: 3 kW, 380V Drive power guillotine shears: 1.1kW Maximum thickness of sheet metal (mm.): 0.6 Forming steps number -18 Shaft diameter (mm) – 55 Rolling speed (m/min.): 10-15 Automatic roll forming soffit panels production machine SPM-1 auto makes panels with unlimited length. The machine has 18 pairs of forming rolls, providing high quality of the final products. There is special perforating module on the final stands of machine, responsible for cutting out perforation holes during roll forming. It is possible to use the machine both with and without this module, thus it is possible to obtain panels both with and without perforation, depending on the customer’s needs. We use alloy tool steel for rollers of machine and make them on high-precision CNC turning equipment, ensuring high product standards. Guillotine profile shears is at the machine exit and has electric drive to work. The electric drive of the shears is a more reliable solution compared to pneumatic or hydraulic systems for working on cutting shears of other line manufacturers. The rolling speed of the line is 10-15 meters per minute with the possibility of programmatic adjustment of this parameter. Specifications: Material width (mm) 409 The material thickness (mm) 0,4-0,6 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Year of construction: 2023, condition: new, We offer brand new roll former automatic line for corrugated metal sheet production. Depends on customer preferences we can produce line for 10, 20, 35, 44 or 57mm profile high. Some of lines we have ready on stock. Line is equipped with electric uncoiler up to 10t coils, roll forming part, cutting shear, sheet stacker for 10m length. Also we produce customized roll forming lines, metal tile lines, cut-to-length lines, slitting lines etc. Kljdpfx Aekhaadeayjr To get more information about our machinery please contact our sales department

Condition: new, Year of construction: 2025, Manual bending machine MB-3150 The principal difference that makes our manual bending machine much more functional than other company’s bending machines it’s the removable upper bar. So it lets you the opportunity to replace the slim upper bar to a bar with another configuration (segmented bar or bar for producing of the corrugated sheets). It’s help you to save money for buying additional machines and save the working place. Our manual bending machine has strong rigid construction so it lets you to bend metal sheets without any unwanted deformations. You can purchase manual bending machine MB-3150 mm in a standard set (manual bending machine, roller shear, back table, alidade, angle limiter, side handles). Or you can get additional equipment for the manual bending machine MB-3150 mm: pedals, segmented bar, bar for producing of the corrugated board, absorber, front limiters) There are fourth types of the manual bending machines MB we make: Manual bending machine 1400x1.2mm Manual bending machine 2150x1mm Manual bending machine 2650x0.8mm Manual bending machine 3150x0.7mm This manual bending machine bends metal sheets with maximum thickness 0.7mm Our enterprise has started to produce this kind of the manual bending machines since 2003 so we have great experience in doing our job and can propose the great solution to your business. To get information about the price of this bending machine and the way it could be delivered to your location just contact us. We will give you all the information you need. Kledev T Uvzspfx Aayjr Specifications Maximum material width (mm) 3150 Maximum material thickness (mm) 0.7

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: 11-2018, We offer this used EMproject89 BME 2000S BoxMaker, year of construction 2018. Technical Specification: Type of machine: BME 2000S Producer: EMprojekt89 Serial number: 11-2018 Year of manufacture: 05/2018 Voltage: 3x 380 V Total number of boxes done: 681000 Condition: very good, fully operational, in regular continuous production Corrugated Board Types which can be used: Single and double wall (3-layer and 5-layer cardboard) Max. Board Size: 2400 mm width x 7000 mm length Min. Board Size: 200 mm width x 700 mm length Slotting Knives: 2 x 500 mm -> new ones are ordered and it will be installed next week Width of the Slotting Knife: 7 mm Minimal height of the box which can be produced: 80 mm Maximum height of the box which can be produced: 1400 mm Vertical Cutting Knives: 2 x circular knives and 4 scalpel blades -> able to quality sheet formatting Scoring/Creasing Wheels: 2 x creasing wheels Cross Cutting Knife: 1 -> new one, edited, able to perform perforation Kjdpfx Asyyblusayelr Power supply: 5 kW Gross Weight: 4500 kg Automatic Cardboard Feeding: NO Handhole on Box Side Walls: Yes, 20 mm x 160 mm New Springs (changed lately) on new no-crush wheels (changed lately) If you have any questions or need more information, feel free to send us a message or give us a call. We can send the video of the working machine and the machine's capabilities after contact with us. We can also help to find the best transport options.

Condition: used, Year of construction: 2020, functionality: fully functional, We are offering this used EMproject89 MS 1700 TWOCOL, year of manufacture 2020. Machine type: MS 1700 TWOCOL Serial number: 24/2020 Year of manufacture: 11/2020 Voltage: 220 V Rated power: 1.5 kW Suitable for flexographic printing, carton printing, corrugated board, and packaging. Kodpfx Asyz T H Hsayelr If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2016, condition: used, functionality: fully functional, machine/vehicle number: MT-108/2016, We are offering a used IPVET EPS/MW Custom Sandwich Panel Production Line, manufactured in 2016. The machine has seen very little use. Manufacturer: IPVET Model: EPS/MW Custom Sandwich Panel Year of Manufacture: 2015 Condition: Used Category ID: 1059 Type: EPS/MW Sandwich Panel Production Line The EPS/MW (Expanded Polystyrene/Mineral Wool) sandwich panel production line is suitable for the manufacture, staging, and packaging of assorted types and sizes of sandwich panels with insulation. The line includes all necessary electrical circuits, hydraulic system, and control units required for operation. The production line is capable of manufacturing the following products: - EPS roof panels with insulating thicknesses: 60mm, 80mm, 100mm, 120mm, 150mm, 200mm - EPS wall panels with insulating thicknesses: 60mm, 80mm, 100mm, 120mm, 150mm, 200mm - MW roof panels with insulating thicknesses: 80mm, 100mm, 120mm - MW wall panels with insulating thicknesses: 80mm, 100mm, 120mm Raw materials used in production: Kledpfx Aeyw Tmloayer - 0.4-0.7mm x 1250mm pre-painted, galvanized steel sheet - EPS 80 Expanded Polystyrene boards - MW Mineral Wool (Spanrock XL) - Adhesive (polyol) - Adhesive (isocyanate) Machine Units/Equipment included in the Sandwich Panel Production Line: The EPS/MW sandwich panel production line is a comprehensive system consisting of several machines and equipment. The production line comprises the following units: 2.1. Decoiler for external steel sheet with trolley 2.2. Trapezoidal roller conveyor 2.3. Shearing knife for cutting steel sheet 2.4. Micro-corrugation roller conveyor 2.5. Edge-forming roller conveyor for standard joint outer facing 2.6. Edge-forming roller conveyor for concealed joint outer facing 2.7. Decoiler for internal steel sheet with trolley 2.8. Shearing knife for cutting steel sheet 2.9. Micro-corrugation roller conveyor 2.10. Edge-forming roller conveyor for internal facing 2.11. EPS/MW insulation dispenser unit 2.12. Insulation material conveyor belt 2.13. EPS/MW insulation trimming knives 2.14. Adhesive application unit 2.15. Pump 2.16. Adhesive spreading unit 2.17. Laminating roller conveyor 2.18. Cutting saw 2.19. Accordion roller conveyor 2.20. Roller discharge table 2.21. Stacking and flipping unit 2.22. Transport trolley for stacking 2.23. Packaging unit 2.24. Chain conveyor unit for material handling If you have any questions or require further information, please send us a message or call us.

Condition: excellent (used), TruTool PN 200 electric hand cutting machine Product features The new TruTool PN 200 vibrating shear is mainly used for cutting C-L-U sections, trapezoidal sheet metal, etc. components. The device with a short tool for processing sheet metal with a profile depth of up to 85 mm and for C-L-U sections. Also for corrugated sheet metal. Ideal for hard-to-reach places. The working direction can be adjusted 360° easily and without tools in 45-degree steps. Minimized set-up time Replacement of punch and yoke without interruption and without tools. Unmatched speed Fast and efficient, 2.1 meters per minute at 400 N/mm2 structural steel. Application: Trapezoidal sheet metal For cutting profiles up to 86 mm deep and 132.5 / 40 mm wide. For straight and diagonal cuts. Profiles For cutting C-L-U profiles. Corrugated sheet For cutting and slitting. For bevel cuts and internal and radial cuts. - MAXIMUM SHEET THICKNESSES: - MAXIMUM THICKNESS OF 400 N/MM² STEEL SHEET: 2 mm. - MAXIMUM THICKNESS OF STEEL 600 N/MM²: 1.5 mm Klodpfxeuhm E Ss Aayer - MAXIMUM THICKNESS OF STEEL SHEET 800 N/MM²: 1 mm - MAXIMUM THICKNESS OF SHEET METAL MADE OF ALUMINUM UP TO 250 N/MM²: 3 mm - RADIANCES: - LOWEST RADIUS: 50 mm - GENERAL INFORMATION: - OPERATING SPEED: 2.1 m/min. - NUMBER OF SHAKES AT NOMINAL LOAD: 1500 1/min. - INITIAL HOLE DIAMETER: 24 mm - RATED POWER CONSUMPTION: 550 W

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: SEM126/TH46098, Automatic Carton Folder Gluer, Max open blank width: 1100 mm, Min open blank width: 126 mm, Max feed up length: 800 mm, Min feed up length: 60 mm Stock : Cartonboard up to 800 gsm, Corrugated up to E flute.Max belt speed i: 425 m/min Complete with : Bottom belt feeder, Back lifters with vibration for smooth and consistent feeding, Pre-breaking system, Small box attachment - allowing min 76mm open blank width, Crash-lock module, Bottom left hand side glue pot, Three belt carrier folding section, Heavy duty Double Trombone delivery, Compression belt section, HHS C-1100 8 B cold glue system, 4 x HHS glue guns, Remote control, Manuals and electrical diagrams. Kljdpfx Asv Ipl Teayor

Condition: excellent (used), Year of construction: 2016, As good as new machine for the production of corrugated cardboard honeycomb. New price €600,000.00 Kjdpfx Aaotqpd Hoyolr

Condition: used, Year of construction: 2021, Format: 760 x 1.060 mm Equipment: Bogenformat min.: 300 x 350 mm Bogenformat max.: 760 x 1.060 mm Maximum machine speed: 8,000 Bg/h Maximum punching pressure: 2.6 MN / 260 t Materials and stacking height (including pallet) Paper min.: 90 g/qm2 Cardboard / solid cardboard max.: 2,000 g/m2 Corrugated cardboard max.: 4.0 mm Height of investor stacks: Without non-stop max.: 1,500 mm Klsdjyx Hvcepfx Aayjr Maximum continuous operation: 1,200 mm Maximum weight of stack of feeders: 1,500 kg Without a utility separation station Without MasterSet

Year of construction: 2009, condition: good (used), Complete Textile Conveyor Belt Production Factory Machines for Sale! Don’t miss this incredible opportunity! We are offering a complete range of machines from our textile conveyor belt production factory—all in great condition and ready for immediate sale. What’s Included: All machines necessary for textile conveyor belt production Well-maintained and fully operational equipment MILLS: 1st.​Corrugate broker mills 500x1500 ​150 HP electric motor and reducer with electric panel​ 2nd. ​Twin/Double refiner mills 500x900 ​100 HP electric motor with electric panel​ 3rd.​Mill 500x1550 ​100HP electric motor and reducer ​with electric panel​ 4th.​Mill 400x1400 ​40HP electrical motor and reducer ​with electric panel​ 5th.​Mill 400x1250 ​30HP electrical motor and reducer With electric panel CALENDERS:​ 1st.​ CALENDER with 4 cylinder 400x1250 ​80 kw DC motor ​electric motor with speed control panel, ​Let off-wind up and all accecories 2nd.​CALENDER with 3 cylinder 500x1650 ​150 hp DC electic motor with speed control panel ​Let off-wind up and all accecories BANBURY MIXERS: ​ 1st.​ FARREL BRAND 80 liter banbury mixer ​150HP electric engine motor with electric panel board plus ​steel constration platform 2nd.​Knider rubber compound mixer with 70 liter capasity ​100HP electric motor and reducer BATCH OFF: Rubber compound forming machıne VULCANIZATION PRESS: ​ 1st.​VULCANIZATION PRESS ​SIZE: 1550X7650 two dayliglt ​16 pcs.(400x500) hydraulic piston cylinder with power pack platform ​let off/wind up ​strecher system with electric panel ​ 2nd.​VULCANIZATION PRESS ​SIZE: 1850x5500 ​8 pcs (400x500) hydraulic piston cylinder with power pack platform ​let off/wind up ​strecher system with electric panel ​ 3rd.​VULCANIZATION PRESS for repair and control of conveyor belts ​SIZE: 500x1400 with electric panel with two piston. 4rd.​VULCANIZATION PRESS for splıceıng of conveyor belts ​SIZE: 1100x1600 with two piston and hydraulic power pack. 5 UNIT CHAIN BUCKET: and belt conveyors for rubber compound transfering systems with electric panel. CONVEYOR BELT PREPARE AND MAKING SYSTEM: wıth 5 let off statıons 1 wınd up and electric panel. STEAM GENERATOR: Kledpoxzzcmsfx Aayor wıth water tanks and electric panels presure : 8 bars capacity 1000 kg/hour LABS EQUIPMENTS: Computerızed tensile testing device Reometr computerızed rubber compuond tetsing device Hardness control device Abrassıon testing device Precısıon sensıtıve scale Rubber testıng electric lab press for rubber sheet AIR COMPRESORR: Atlas Copco 8 Bars. WATER COOLİNG SYSTEM: Water pomp and water tank

Condition: excellent (used), Year of construction: 2006, Year: 2006 Specification Detail Die cutting and stripping unit Max. Sheet Size 1050 x 750 mm Min. Sheet Size 450 x 370 mm Max. Die Cutting Area 1040 x 730 mm Max. Speed 7,500 sheets per hour Max. Pressure 250 tons Kjdpsyrflhjfx Aayelr Stock Range 100 gsm paper to 2000 gsm cardboard; up to 3 mm corrugated board Min. Gripper Margin 4 mm Machine Weight 18,000 kg

Year of construction: 2008, condition: ready for operation (used), This DELTA pallet nailing machine line was manufactured in 2008. It features a comprehensive setup including a base nailer, a nailing machine with pneumatic feeder and nail control, units for marking, turning by 90 and 180 degrees, a corner saw, and a stacking unit, complemented by a conveyor belt. Consider the opportunity to buy this DELTA pallet nailing machine line. Contact us for more information. Machine Benefits Technical Machine Benefits Kledpfeyaiyrsx Aayor • Base nailer / pallet nailing machine: with pneumatic crossboard feeder, with template for holding deck boards, with nail feeding control system / loading unit for pallet marking / unit for turning pallets 90 degrees / pallet corner saw unit/ pallet turning unit with 180 degree turner / pallet stacking unit / pallet conveyor belt

Year of construction: 2004, condition: ready for operation (used), A defective flatbed die-cutting machine IMG Klett is available. Chase inner dimensions X/Y: 1630mm/1210mm, max. cutting dimensions X/Y: 1600mm/1180mm, min. sheet dimensions X/Y: 650mm/450mm, max. sheet dimensions X/Y: 1200mm/1620mm, min. sheet thickness: 1mm, max. corrugated board thickness: 8mm, max. plastic corrugated material thickness: 8mm, gripper margin waste area: 9mm-15mm, max. cutting force: 400t, motor power: 22kW. Machine dimensions X/Y/Z: approx. 7550mm/5200mm/2450mm, weight: approx. 32000kg. Documentation available. An on-site inspection is possible. Ksdpoyxq Ucofx Aayslr

Year of construction: 2000, condition: good (used), Platen-type equipment designed for die cutting, creasing, and perforating cardboard and corrugated board. Maximum sheet size: 720 × 520 mm. Kledpfx Aoyb Tc Hjayor Output: up to 25–28 cycles per minute. Motor power: 2.2 kW. Weight: approx. 2000 kg No documentation available.