Used Doosan Dx 60 R for sale (279)

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 6,280 h, load capacity: 3,500 kg, lifting height: 5,205 mm, free lift: 1,700 mm, fuel type: gas, mast type: triplex, construction height: 2,515 mm, fork length: 1,500 mm, empty load weight: 5,500 kg, total length: 3,200 mm, drive type: Treibgas, construction width: 1,800 mm, LPG forklift Load centre: 500 Mast type: Triplex Technical condition: normal Front tyre type: Superelastic Front tyre condition: 80 - 100% Rear tyre type: Superelastic Giodpfxoytkkfs Anyow Rear tyre condition: 80 - 100% Sideshift, fork positioner, 3rd valve, 4th valve, rear working light, front working light, roof cover, windscreen, full free lift,

Condition: good (used), Year of construction: 2013, 2013 Doosan DBC130 CNC Horizontal Milling/Boring Machine Gisdpozk Dt Hofx Anyew Table Dimension 1,800 x 1,600mm 913 'T' Slots). Maximum Table Load 15,000kg. Axis Travel 'X'=3,000mm, 'Y'=2,000mm, 'Z'=1,600mm, 'W'=600mm. Maximum spindle Speed 3,000rpm (26kW Motor). 90 Position ATC. S/No.MB0003-000431 (2013/08). With Coolant System. Overall Dimensions L8,970 x W7,660 x H4,910mm. Weight 43,000kg. D Turner & Sons, a pre approved site rigger, is available to provide immediate quotations for equipment removal. D Turner & Sons, a pre approved site rigger, is available to provide immediate quotations for equipment removal.

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 30,280 h, The Doosan DL550 machine shown in the picture is for sale in good condition. Bucket size: 5.8 m3. Regularly maintained, ready for immediate operation. It can be viewed while in operation. Technical specifications: Category: Wheeled loader Operating hours: 30,280 hours Emissions sticker: 4 (Green) Year of manufacture: 2014 Equipment: Central lubrication system; Four-wheel drive; Particulate filter Tire condition: 75%. Gjdpfx Anszd Sk Hsyoiw Delivery: EXW Székesfehérvár, Hungary. An optional 16 m3 bucket is available at an additional cost.

Condition: used, Machine Type Multi-Tasking CNC Turning & Milling Center Chuck Size 15" Main / 15" Sub Swing Over Bed 1,000 mm Swing Over Saddle 700 mm Maximum Turning Diameter Ø760 mm Maximum Turning Length 1,540 mm Maximum Bar Capacity Ø102 mm Main Spindle Speed 3,000 rpm Sub Spindle Speed 3,000 rpm Main Spindle Motor 30 kW Sub Spindle Motor 30 kW Milling Spindle Speed 12,000 rpm Milling Spindle Motor 22 kW Milling Spindle Taper Capto C6 B-Axis Rotation ±120° Y-Axis Travel ±150 mm (300 mm Total) X1-Axis Travel 695 mm Z1-Axis Travel 1,585 mm X2-Axis Travel 235 mm Gisdpfx Aezh H H Rsnyjw Z2-Axis Travel 1,540 mm Tool Magazine Capacity 40 Tools C-Axis Main & Sub Spindle Rapid Traverse 48 m/min CNC Control FANUC 31i Key Features ✔️ High-Performance Multi-Tasking CNC Turning & Milling Center ✔️ Simultaneous Turning, Milling, Drilling and Tapping in a Single Setup ✔️ Powerful 12,000 rpm Integrated Milling Spindle ✔️ High-Rigidity B-Axis Milling Head (±120°) ✔️ Main & Sub Spindles with Full C-Axis Control ✔️ Large Y-Axis Travel (±150 mm) ✔️ 40-Tool Automatic Tool Changer (ATC) ✔️ Capto C6 Tooling System ✔️ Heavy-Duty Box Guideway Design ✔️ Excellent Surface Finish and High Machining Accuracy ✔️ Reduced Setup Time and Increased Productivity ✔️ Ideal for Complex Parts Requiring Complete Machining

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 205 mm, travel distance Z-axis: 580 mm, number of axes: 2, Horizontal turning machine manufactured in 2006. This DOOSAN Puma 240 MB features driven tools and is equipped with a Fanuc 0iTC control unit. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 240 MB machine we have for sale. Contact us for further details. - Manufacturer: Doosan- Model: Puma 240 MB with driven tools- Year of Manufacture: 2006- Condition: Very good / Fully functional- Control Unit: Fanuc 0iTC Technical Specification Counter Spindle No Driven Tools Yes Godpfjzb Etwsx Anyjiw

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 205 mm, travel distance Z-axis: 550 mm, number of axes: 4, This 4-axis DOOSAN Lynx 220 LMS was manufactured in 2013. It features a Fanuc 31 i control unit and comes equipped with a short bar loader/bar feeder. If you are looking to get high-quality turning capabilities, consider the DOOSAN Lynx 220 LMS machine we have for sale. Contact us for further details. - Manufacturer: Doosan- Model: Lyax 220 LMS- Year of Construction: 2013- Condition: Very good / Fully functional- Control Unit: Fanuc 31 i- Included Equipment: Short bar loader / Bar feeder (visible connected to the left of the lathe) Technical Specification Gedpfx Anjzb Ergjyeiw Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 2005, functionality: fully functional, Very well-maintained machine, regularly serviced and in good condition. - New B-axis spindel installed in 2025 - Includes a large number of tool holders, both live tooling and static tooling. - Bar feeder included. - Gantry loader included. Gsdpfxezh Rhfj Anyjiw - 80-position tool magazine with Capto C6 tooling. The machine can be inspected under power and in production until 17 July.

Condition: excellent (used), Year of construction: 2021, Twin-spindle version With milling head with C-axis with Y-axis with driven tools FANUC Series 31i Model 5 control Gjdpjzbr Alofx Anyjiw Turning diameter - 540 mm Turning length - 1040 mm Y-axis travel 170 mm (+/- 85) Spindle taper ASA A2-6 Spindle speeds 5,000 rpm each C-axis indexing 0.001° Milling head B-axis 240° Indexing 0.001° Spindle speed 12,000 rpm Turret with 12 driven positions Tool magazine with 80 positions Part pick-up device Tool measuring system LNS Sprint 565 S2 bar feeder Misc. accessories MARCELS MASCHINEN CH

Condition: ready for operation (used), Year of construction: 2016, spindle speed (max.): 2,800 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,350 mm, spindle motor power: 26,000 W, total height: 2,198 mm, total width: 2,030 mm, overall weight: 7,050 kg, controller manufacturer: FANUC, product length (max.): 4,855 mm, number of axes: 3, This 3-axis DOOSAN PUMA GT3100LM was manufactured in 2016. It features a maximum turning diameter of 376 mm and a turning length of 1,245 mm. The machine is equipped with a 12-station turret and live tooling capability, providing versatility for various applications. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA GT3100LM horizontal turning machine we have for sale. Contact us for further details. • Electrical: Nominal capacity 33.91 kVA; AC 400 V; 3Ø, PE, 50/60 Hz; Full load current 48.95 A; Interrupt power 5 kA; Short circuit withstand 10 kA; Electrical diagram edition GT3100H31UA00 • Chuck: Samchully MH-212, 3-jaw hydraulic; Chuck size 305 mm • Turning capacity: Max swing over bed 720 mm; Max turning diameter 376 mm; Max turning length 1,245 mm; Max bar capacity 102 mm • Spindle: Nose A2-11; Bore diameter 115 mm; Motor power 26/22 kW (30 min/continuous); Max torque 1,123 Nm; C-axis indexing increment 0.001° • Turret: BMT65P, 12 stations; Live tool max speed 5,000 rpm; Live tool motor power 7.5 kW; 12-station turret with live tooling capability • Axes: Rapids X 24 m/min, Z 30 m/min; Guideways: Solid box guideways on all axes • Tailstock: Programmable movable/digital tailstock with live center; Quill taper MT5 • Counters: Power-on 13,813 h 38 min; Operating 8,538 h 37 min; Cutting 5,547 h 03 min Additional equipment Giodpfezbilqox Anyew • External Eppinger Preci-Flex live tool holders and static blocks • Tool-setting probe arm • Original technical documentation Technical Specification Counter Spindle No Driven Tools Yes

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, DOOSAN 7/53 diesel-powered compressor with an aftercooler (air dryer), recently serviced. Technical data: capacity: 5.30 m3/min; operating pressure: 7 bar; Gisdpfxszddbrs Anysw year of manufacture: 2018; engine: YANMAR; operating hours: 880!!! documentation for registration available; the compressor is in full working order and ready for operation; warranty provided. net price: 39,800 PLN gross price: 48,954 PLN A link to a video demonstrating the machine in operation is provided below.

Condition: like new (used), Year of construction: 2022, operating hours: 259 h, turning diameter over cross slide: 790 mm, turning length: 2,124 mm, turning diameter: 550 mm, spindle bore: 102 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 30 rpm, travel distance X-axis: 352 mm, travel distance Z-axis: 2,155 mm, spindle motor power: 35 W, rapid traverse X-axis: 16 m/min, rapid traverse Z-axis: 20 m/min, 2-axis CNC lathe "DOOSAN DNS mod. PUMA 4100LA" with DN Solutions-Fanuc i-Plus iHMI CNC Godpoqrr Nwofx Anysiw

Condition: used, Year of construction: 2021, Technical details: rated capacity: 220 kVA Number of working hours: 0 h type of fuel: Diesel revolutions per minute of the motor:: 1500 rpm output voltage: 400 / 50 Hz V weight of the machine ca.: 2,2 t dimensions L x W x H: 3,3 x 1,2 x 2,24 m The generator is soundproofed. - NEW -New Diesel engine: -6-cylinder -type P086TI Giodpfeu U E Edex Anyjw -with battery 2x 12Volt 90 Ah Generator: -alternating current -400Volt / 50Hz -current 318 A -speed 1500 rpm -protection class IP23 -Isolation class H *

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 1,200 mm, controller manufacturer: FANUC, controller model: 31i CNC, total height: 3,760 mm, total width: 4,325 mm, overall weight: 26,000 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 35,000 W, number of slots in tool magazine: 60, tool weight: 30,000 g, product length (max.): 8,150 mm, number of axes: 4, This 4-axis DOOSAN HM 8000 horizontal machining center was manufactured in 2014. Equipped with Fanuc 31i CNC control, it features a maximum workpiece diameter of 1450 mm and weight capacity of 2000 Kg. It includes a high-pressure through-spindle coolant system, chip conveyor, and both workpiece and tool probes. If you are looking to get high-quality milling capabilities consider the DOOSAN HM 8000 machine we have for sale. Contact us for more information about this machine. • Max. workpiece diameter: 1450 mm • Max. workpiece weight: 2000 kg • Travel (X/Y/Z): 1400 x 1050 x 1200 mm • Pallet size: 800 x 800 mm • Spindle motor power: 22/35 kW • Max. torque: 1732 N·m • B-axis: indexable by degree • Max. tool diameter: 130/320 mm • Max. tool length: 630 mm Additional equipment • Belt-type oil skimmer • Triple light tower • Pallet centering device • Shower coolant Godpfx Anozar Aijysiw • Through-spindle coolant 70 bar, 7.5 kW, with cyclone filtration • Automatic shutdown • Tool load monitoring • Chip conveyor • Workpiece probe OMP60 • Tool probe TS27R Dimensions Machine Depth 8150 mm Technical Specification Taper Size BT 50

Condition: used, machine/vehicle number: IC1371, Year of construction: 2018, operating hours: 142 h, load capacity: 2,000 kg, load center: 600 mm, enginetype: Electric, manufacturer: Doosan Gsdpfoy I Hqljx Anyoiw

Condition: ready for operation (used), Year of construction: 2011, number of axes: 2, This DOOSAN PUMA 2100MS was manufactured in 2011. It features a 65 mm motorized bar passage and a counter-spindle, complete with accessories and an LNS bar loader. Ideal for precision horizontal turning operations. Contact us for more information about this machine. Additional equipment Gsdpfx Anezaripsyeiw • Motorized bar passage with counter-spindle • Complete with accessories and LNS bar loader Extra Information Machine still under power

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, turning diameter over cross slide: 300 mm, turning length: 510 mm, spindle bore: 51 mm, spindle speed (max.): 6,000 rpm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 36 m/min, torque: 127 Nm, bar passage: 50 mm, chuck outer diameter: 152 mm, Equipment: documentation/manual, rotational speed infinitely variable, Machine used in custom and small-batch production, operating in a single shift. Gisdpfozcmmnex Anyjw Excellent condition, producing parts with an accuracy of 0.01mm since its initial use. C-axis, driven tool positions in the turret, BMT connection. Programmable steady rest. Equipped with a chip conveyor and oil mist extractor. Comes with original documentation. High-rigidity roller linear guides: The robust roller guides used on the X and Z axes minimize vibration and dramatically reduce machining time. The price includes the 1.5m bar feeder shown in the picture; it can also be purchased separately if required.

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : BT40 - Spindle power : 15 [kW] - Spindle speeds : 10000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 762 x 516 x 570 [mm] - Rapid traverses rates (X/Y/Z) : 40 / 40 / 36 [m/min] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 30 - Tool exchange time : 1,3 [sec] PALLET CHANGER - Pallet size : 860 x 570 [mm] - Pallets number : 2 - Pallet exchange time : 5 [sec] POWER SUPPLY - Supply voltage : 200 [V] - Total installed power : 40,25 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3130x3260 [mm] - Machine height : 3130 [mm] - Machine weight : 9200 [kg] EQUIPMENT - CNC : Fanuc 0i-MD Interface : PCMCIA, RS232 / RJ45 - 3 colors status lamp - Coolant tank * with high-pressure pump : 20 [bars] - Coolant through spindle - Spindle cooling unit - Chips conveyor Godpfx Anoy Tzcysyeiw - Electric transformer

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 1,050 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, controller model: 828D, table load: 1,000 kg, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, tool weight: 8,000 g, number of axes: 3, This 3-axis DOOSAN DNM 5700 was manufactured in 2017. It features an X-axis travel of 1050 mm, Y-axis travel of 570 mm, and Z-axis travel of 510 mm. The machine is equipped with a powerful 18.5 kW spindle and a table size of 1300 × 570 mm, allowing for efficient machining operations. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 5700 vertical machining centre we have for sale. Contact us for further details. • Table size: 1300 × 570 mm • Tool changer: 30 positions • High-pressure cooling • CNC control: Siemens 828D • Condition: Very good; regularly maintained Technical Specification Giodpfx Ajy Uki Ssnyow Taper Size ISO 40 Through-spindle Coolant Yes

Condition: used, Year of construction: 2011, operating hours: 10,700 h, Empty weight: 18.890 kg Godpfx Aezb Ndmonysiw Dimensions (LxBxH): 810 x 292 x 347 cm Digging depth: 7.533 m

Condition: used, Year of construction: 2017, operating hours: 8,000 h, Location: Cabanillas del Campo (Guadalajara) Giedpezb Nahjfx Anyow The used Doosan DL300-5 wheel loader is designed to allow the operator to work for hours under excellent conditions. More space, better visibility, air conditioning, a very comfortable seat, sufficient storage space, and more features. Load capacity: 3 m3 (3,000 liters). Used wheel loader for sale, equipped with a bucket at the front, ideal for building construction, mining, roads, highways, tunnels, or hydroelectric dams. This wheel loader model outperforms the competition with technologies that reduce fuel consumption and set new standards for comfort in the cab. CE certified.

Condition: used, power: 127 kW (172.67 HP), lifting height: 2,750 mm, Year of construction: 2015, operating hours: 7,350 h, Empty weight: 14.400 kg Dimensions (LxBxH): 772 x 264 x 328 cm Engine type: Doosan Doosan DL06K Tier IIIB Bucket volume: 2.5 m^3 Gjdpfx Anezb I U Djyjiw

Condition: good (used), Year of construction: 2008, Brand : DOOSAN Model : MYNX 750 Type : VERTICAL Cnc: FANUC 21 iMB Hours : 7.300 h Table size : 1600 x 750 mm X Travel : 1500 mm Gsdpfxjt H Nbue Anysiw Y Travel : 760 mm Z Travel : 650 mm Spindle speed: 12.000 rpm Taper type: BT 40 Number of tools: 30 Equipped with chip conveyor

Condition: excellent (used), Year of construction: 2020, Table size 1630 x 760 mm, table load 1500 kgs, Traverses XYZ 1525 x 762 x 625 mm, rapid feedrates 30m/min, Spindle power 24Kw, Giodszbkm Nepfx Anyew spindle speed 12,000rpm, 30 station ATC, spindle taper BT40, through spindle coolant, swarf conveyor, spindle probe , heidenhain tnc 640control.

Condition: excellent (used), Year of construction: 2018, Traverses X Y Z 800 x 450 x 510mm, table size 1000 x 450 mm, table load 600KGS, spindle taper BT40, spindle speed 12,000rpm, 30 station ATC, Gisdszbhv Ijpfx Anysw spindle power 18.5/11Kw, Through spindle coolant, Siemens 828D control

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 762 mm, travel distance Y-axis: 435 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 828D, table load: 600 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, tool weight: 8,000 g, number of axes: 3, This 3-axis DOOSAN DNM 400 II was manufactured in 2014. It features an X-axis travel of 762 mm, Y-axis travel of 435 mm, and Z-axis travel of 510 mm. The machine includes a worktable with dimensions of 920 mm x 435 mm and a maximum table load of 600 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 400 II vertical machining centre we have for sale. Contact us for further details. • Capacity and travels: • Spindle nose to table: 150–660 mm • Worktable: • Size: 920 x 435 mm (36.2" x 17.1") • Spindle: • Max torque: 117 N·m (86.3 ft-lbs) • Taper: BIG-PLUS Dual Contact #40 (BT40 / CAT40) • Cooling: Through-spindle coolant (included) • Automatic Tool Changer (ATC): • Capacity: 30 tools (cam-type double arm) • Tool-to-tool time: 1.3 s • Max tool length: 300 mm • Feed rates and motion: • Rapid traverse (X/Y): 36 m/min (1,417 IPM) • Rapid traverse (Z): 30 m/min (1,181 IPM) • Max cutting feedrate: 10,000 mm/min Additional equipment Giodpfjy T I Snex Anysw • Workpiece clamps, tools, and toolholders available at additional cost (not included) Technical Specification Taper Size BT 40