Used Double Mitre Saw for sale (17,316)

Condition: excellent (used), Sprossen punching machine 12 mm Used, in top condition Manufacturer: Schleicher Sprossen knife 12 mm Right extension table with stop slider Required space approx. 1100 mm x 600 mm x 1100 mm Weight approx. 65 kg Storage location: 54634 Bitburg, loaded free, unpacked Cedpfjw Hlztox Addjhf Handover in as-inspected condition, without guarantee or warranty

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Storage location: Garbsen Chjdpfxexnlgce Addef

Condition: good (used), Year of construction: 2009, machine/vehicle number: 60115, Offer 25422 Hydraulic Two-Column Guided Mitre Band Sawing Machine (Automatic) Technical Data: - Fully automatic cutting process with hydraulic lifting/lowering of the saw frame - Manual mitre adjustment with hydraulic clamping - Automatic material feed unit, motorised mitre adjustment - Saw blade dimensions: 4400 x 34 x 1.1 mm - Cutting speed steplessly adjustable: 15 – 150 m/min - Stepless cutting pressure regulation: 10 – 15 bar - Lowering speed: 0 – 300 mm/min - Cutting angle range: 30° – 90° Chjdpfjx Aqxajx Addjf - At 90° round: 335 mm - At 90° square/flat: 500 x 335 mm - At 45° round: 330 mm - At 45° square/upright: 320 x 335 mm - At 30° square/upright: 170 x 335 mm - Automatic material feed unit - Discharge roller conveyor: 4000 mm - Infeed roller conveyor: 4000 mm - Drive: 400 V / 6.5 kW - Space requirements approx.: W 2300 x H 1750 x D 2200 mm - Weight approx.: 1800 kg

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Electronic X-axis control X-axis positioning speed (m/min): 25 Pneumatic tilting of heads External inclination 45°/22.5° Chsdpfoxu Dk Tex Addjf Mechanical adjustment of intermediate angles Oleopneumatic blade feed Useful cutting length (mm): 5,000 Minimum standard cut with 2 heads at 90° (mm): 310 Blade diameter (mm): 450 Touch probe

Condition: good (used), Code: 0236 Brand: FOM INDUSTRIE Model: BLITZ ALVA 450 - CE Standard Double-head electropneumatic sawing machine for cutting and machining aluminium profiles, plastic, light alloys, pvc - CE Standard Useful cutting length mm 4000 Vidia blade diameter mm 450 F32 Three-phase motors Hp 3 - Revolutions/min 2800 Head inclination: 90 degrees - 45 degrees external - 22,5 degrees external - Intermediate graduation with mechanical stop and reading on graduated vernier scale First head fixed Second head mobile: automatic positioning with manual option - Automatic head positioning speed 12 mt/min Cjdpfxexv Dfaj Addehf Movable head positioning accuracy: +/- 0,1 mm Minimum cutting capacity between the two heads: 300 mm Maximum cutting capacity between the two heads: 4000 mm Hydropneumatic blade feed (adjustable output speed - rapid retraction) Vertical and horizontal pneumatic clamps Spray lubrication of the cut Mobile head roller conveyor 3 mt Operating pressure 7 bar Suction mouth diameter mm 100 Overall dimensions mm 5760 x 1600 x 1950 h Weight kg 1550

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Double-shaft multirip saw Rema DMJB-200 Year of production: 2004 The machine is in very good condition, little used, complete with a chip extractor mounted from above. DTR documentation included. Technical data: - saw blade diameter: 350 mm Cjdpoxyq Naofx Addehf - cutting height of wood: 25–200 mm - minimum thickness of finished slats: 8 mm - maximum spacing of outer saws: 280 mm - minimum length of material: 800 mm - main motor power: 2 × 45 kW - spindle speed: 3300 rpm - conveyor width: 300 mm - feed drive motor power: 3 kW - pressure roller drive motor power: 2 × 0.75 kW - extraction nozzle diameter: 2 × 200 mm - required extraction air volume: 2 × 3400 m³/h - table height: 850 mm - machine weight: 5500 kg

Year of construction: 2007, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1340020469, Mitre Saw Machine AKS 134/00 1 x Saw Blade Ø550mm Codpfsx A D Ihjx Addohf 1 x Saw Blade Ø500mm Equipped with digital angle setting readout

Condition: like new (used), electronic adjustment of blade tilt 90° – 45° maximum cutting width: 650 mm electronic adjustment of saw height automatic material feed touch control panel laser rotating work table 0° – 345° maximum blade diameter: 800 mm Chsdpfxjxfr Eto Addjf motor power: 16.6 kW year of manufacture: 2016 CE marked 400 V

Year of construction: 2004, condition: excellent (used), Technical specifications: System for welding longitudinal seams on steel beams with T- or H-profile, crane runway girders or bridge sections made of sheet metal - Max. boom arm height: 6,600 mm - Total length of the welding system: 6,700 mm - Horizontal reach of the boom arm: 5,000 mm - System runs on rails - Rail gauge: 2,065 mm - Submerged arc welding process (SAW) - SAW welding units - Power source: MESSER LG800N Cedpfx Aexz Hu Ijddohf - Number of power sources: 2 units - Output: 400 amperes - Tack welding device The system is assembled and available for inspection under power in production. The seller assumes no liability for typographical or data transmission errors. The machine’s condition in terms of appearance, technology, and wear corresponds to its age; used machines are sold without any warranty.

Condition: new, Year of construction: 2019, functionality: fully functional, saw blade diameter: 565 mm, cutting height (max.): 125 mm, overall weight: 350 kg, type of input current: three-phase, rotational speed (max.): 2,800 rpm, rotational speed (min.): 2,800 rpm, table width: 2,400 mm, input voltage: 380 V, saw drive: 4,000 W, spindle speed (min.): 2,800 rpm, spindle speed (max.): 2,800 rpm, height adjustment type: mechanical, main saw diameter: 565 mm, saw blade speed: 2,800 rpm, Equipment: CE marking, saw blade guard, We are offering for sale a radial saw in as-new condition, suitable for precise sizing and angle cutting of large cross-section timber. Includes an additional roller material feed table. VAT invoice available for companies. Viewing is possible on working days by prior arrangement in Derecske. We can assist with loading. Codoxv Tn Rspfx Addohf

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Double edger and trim circular saw with electronic control, consisting of: RET alignment and infeed table. Chain bed in front of the machine with liftable and lowerable pressure roller. Laser unit. DK 90 L 1000: Passage width 1000 mm. Cutting height 125 mm. Feed speed frequency-controlled up to 100 m/min. Automatic roller height adjustment with roller pressure. Width adjustment hydraulically, electronic positioning control with the following setting options: Continuously variable, cm indexing, and switchable to 2 cm indexing. Cutting width between flanges 24 - 440 mm. 10 adjustable fixed dimensions, direct input in mm. Constant dimension allowance, shrinkage allowance (percentage). Splitter wedge pair: 1 x zero line, 1 x independently hydraulically adjustable with electronic positioning control. Splitter wedge opening 48 - 600 mm. Chain bed on the outfeed side. Motor 90 kW with power belt drive. Hydraulic unit. Chedpfxewn D Izo Addsf Chip separator ASV DK II with 2 separating lamellae. Electrical cabinet with power section and PLC control. Control panel. Lath clamping sleeve 403 mm clamping length. Adjustment and zero sleeve. Professionally dismantled and loaded onto truck, free of charge.

Condition: used, Year of construction: 2002, DOUBLE MITRE SAW (GLASS BEAD SAW) OMGA TRF 527 NC incl. star stop Year of manufacture: 2002 Min. & max. distance between units: 158 mm, 2800 mm Cutting capacity at 90 degrees: 55 mm Cutting capacity at 45 degrees: 40 mm Max. cutting height: 40 mm Motor power: 2 x 1.18 kW Chjdpfsxwumqsx Addjf Saw blade bore: 30 mm Saw blade diameter: 220 mm Spindle speed: 5000 rpm

Condition: excellent (used), functionality: fully functional, Electronic X-axis control Chsdpfxjxqx S Ro Addef X-axis positioning speed (m/min): 25 Pneumatic tilting of heads External tilt 45° Mechanical adjustment of intermediate angles Hydropneumatic blade feed Usable cutting length (mm): 4,000 Minimum standard cut at 2 heads at 90° (mm): 310 Blade diameter (mm): 450

Condition: ready for operation (used), 6226 - OMS INVINCIBILE OK 330 DOUBLE MITER SAW Motor power: 1.8 kW Manual movement of the units Chedpfxsu Tc Tvs Addof Blade diameter: 330 mm 3000 RPM Maximum distance between units: 3500 mm Cutting angle adjustment: -45°/+45° Vertical and horizontal pneumatic clamps Cutting process started by two buttons Safety switch Width: 900 mm, Height: 1500 mm Year: 2003

Condition: new, Year of construction: 2025, Depth of cut at 90°: 200 mm Depth of cut at 45°: 140 mm Cutting width at 90°: 420 mm Cutting width at 45°: 295 mm Miter range horizontal: 45° -90° -25° Miter range vertically: 60° -90° -30° Sawblade diameter: 520 mm rpm: 2800 U/min Motor: 5 kW motor brake: yes suction plant diameter: 100 mm weight: 490 kg Codpfx Asiy Ry Ajddjhf

Condition: good (used), Year of construction: 1996, Distance between saws at 90°max : 4000 mm Cutting height at 90° : 200 mm Cutting with: 130 mm Power: 5,1 kW Csdpfxsgixvws Addjhf Weigth: 1260 kg

Condition: excellent (used), Saw – miter saw Pertici Univer 40mm Blade diameter: 400 mm Blade bore: 30 mm Motors: 2.2 kW Max cutting width: 190 mm Chodpfx Ajxmhf Ssddsf Max height: 110 mm Two angle adjustments for cutting CE certificate DTR documentation

Condition: good (used), max. saw blade diameter: 400 mm spindle diameter: 30 mm Csdpfx Ajxvmw Ssddohf adjustable blade up/down max. cutting height: 130 mm min. cutting width: 250 mm max. cutting width: 2350 mm electric saw spacing adjustment motor power: 2 x 4 kW feed carriage motor power: 0.75 kW

Year of construction: 2018, condition: as good as new (ex-display), Miter saw with a saw blade diameter of 600mm (optional 800mm) - manual miter adjustment - Pneumatic table clamping - Pneumatic workpiece clamping (height and inclination angle of the clamping cylinders infinitely adjustable) - Two-handed safety control Optionally available: - Automatic miter adjustment - Roller conveyor with length stop or positioning system - Design as a sawing machine - Preload magazine - Horizontal clamping device - Suction system - Other accessories on request Chedpfed Rhzwex Addof We will be happy to make you an offer tailored to your requirements. The machine can be inspected and tested in 56812.

Condition: like new (used), Motor power: 3.7 kW (5 HP) Table dimensions: 1200 × 800 mm Cutting angle adjustment: 3 positions Speed: 3000 RPM Cjdpfsxup Hmex Addehf Voltage: 380 V

Condition: excellent (used), Max workpiece length: 3600 mm Min workpiece length: 350 mm Max workpiece width: 200 mm Min workpiece width: 70 mm Max workpiece height: 100 mm Min workpiece height: 25 mm Total machine height: 1900 mm Codpfsxvmttjx Addohf Minimum worktable height: 950 mm Worktable guide length: 4000 mm Worktable guide width: 170 mm Total saw blade unit guide length: 110 mm Max table stroke: 110 mm Max drill head stroke: 150 mm Number of drill spindles: 5 pcs (spacing 32 mm) Saw blade diameter: 350 mm Drill head motor: 2 x 1.5 HP Saw blade motor: 2 x 3 HP

Condition: new, Automatic mitre saw UK-450 Codpfx Aded Rhzxjdjhf - Saw blade diameter 450mm - Machining length according to customer requirements - autom. positioning - automatic mitre adjustment (up to +/- 60°) - Range of application: Wood, plastic and aluminium processing - Feed conveyor as smooth conveyor (optionally as roller conveyor) Further technical details and details on request.

Condition: new, Year of construction: 2024, Miter saw with a saw blade diameter of 600mm (optional 800mm) - manual miter adjustment - Pneumatic table clamping - Pneumatic workpiece clamping (height and inclination angle of the clamping cylinders infinitely adjustable) - Two-handed safety control Chjdpfsd Rhziox Addjf Optionally available: - Automatic miter adjustment - Roller conveyor with length stop or positioning system - Design as a sawing machine - Preload magazine - Horizontal clamping device - Suction system - Other accessories on request We will be happy to make you an offer tailored to your requirements. The machine can be inspected and tested in 56812.

Condition: new, Automatic mitre saw UK-450 - Saw blade diameter 450mm - Processing length according to customer requirements - autom. positioning - automatic mitre adjustment (up to +/- 60°) - Range of application: Wood, plastic and aluminium processing Chodpfxjd A Ttxj Addof - Feed conveyor as smooth conveyor (optionally as roller conveyor) Further technical details and details on request.

Condition: refurbished (used), Long cut wedge saw Mitre adjustment via stop arm and staking out holesMachine with two-hand safety controlSaw blades up to diameter 800mmSuction nozzles at relavant pointsHorizontal and vertical workpiece clampsSaw blades, suction systems and roller conveyors/length stops on request. Csdpfed Szf Rjx Addehf