Used Double Mitter Saw for sale (14,958)

Condition: good (used), Year of construction: 2009, functionality: fully functional, saw blade diameter: 450 mm, total length: 1,300 mm, total width: 1,300 mm, total height: 1,500 mm, cutting range round steel at 90°: 100 mm, overall weight: 500 kg, length stop: 2,000 mm, power: 4 kW (5.44 HP), Circular saw for Aluminium, capacity Ø 3 - 100 mm, blade Ø 450 mm, mitre LH + RH 22° - 90° - 22°, motor 4 kw, speed 2800 rpm; options: vertikal clamping, air/oil mist lubrication, digitale mitre device, pression regulation device, rollers left side 3 meter with vertical rollers, measuring rollers right side brand AMAT 2 meter with back pulling device; dimension 130 x 130 x 150 cm, weight ca. 500 kgs Fedsyxfxispfx Aa Nsgb

Condition: used, NC Multi-Blade - Double-Blade Saw for Light Metal MIKSITZ Year of manufacture: 1991 Circular saw, aluminium circular saw, table circular saw, mitre saw For cross-cutting and notching aluminium profiles Saw blade travel: 500 mm Max. cutting height: 100 mm Saw blade speed: approx. 5000 rpm Installed saw blade diameter: 300 mm Max. saw blade diameter: 400 mm Motor power: 5.5 kW Power supply: 400 Volt, 50 Hz Table size: 1100 x 1100 mm Table opening: 300 x 1100 mm Working height: approx. 1100 mm Tool holder: SK40 - Several saw blades can be mounted on a single work shaft with double-sided bearing - A long SK40 arbor serves as the work shaft - Belt drive between the drive motor and saw shaft - Table height adjustable via hand crank (to set cutting depth) - Fixtures and stops can be mounted on the table Fjdpfx Ajdzp Snja Nogb - Saw blade movement via ball screw spindle with servomotor - Single-axis NC control for the cutting movement, LENORD + BAUER type GEL 7541.0000 - Separate control cabinet Space requirement (L x W x H): 1800 x 1600 x 1700 mm Weight: approx. 1100 kg

Condition: excellent (used), Double mitre saw OMS INVINCIBLE OK 330 Maximum cutting length: 3000 mm Fjdpfx Aaeydc Tmo Njgb Maximum cutting width: 140 mm Units adjustable to an angle of 45/-45° Motor power: 2×2.2 kW Saw blades: 330 mm Pneumatic vertical material clamp

Condition: excellent (used), RAIMANN KD31 double-shaft multi-saw - after the technical review - German production - year of production 1988 TECHNICAL PARAMETERS: cutting width 340 mm cutting height 200 mm material width max. 800 mm Fgedpfxsg Db U As Aa Neb engine power 2 x 55 kW feed speed smoothly regulated on the inverter disc diameter max. 350 mm lower shaft 400 mm upper shaft spindle diameter 65 mm sleeve diameter 80 mm four rows of pawls four upper pressure rollers electric height adjustment the ability to work independently with each spindle ruler central lubrication caterpillar with nails table top height from the base 930 mm spigot diameter 200 mm transport dimensions (length / width / height) 320/200/240 cm weight ~ 5000 kg

Condition: ready for operation (used), The U2PRW cutting and drilling machine is designed for processing slats and furniture fronts made of solid wood or MDF. The machine works in a semi-automatic cycle. During one cycle the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in the jammed plane, or the edge of the element. - Made in Poland TECHNICAL PARAMETERS: max. height of cut material 60 mm max. width of cut material at an angle of 45° 70 mm max. width of the material at an angle of 90° 150 mm max. length of cut material 2200 mm min. length of cut material at 45° 455 mm diameter of main saw 250 or 300 mm undercutter diameter 100 mm max. diameter of bottom milling cutter 35 mm max. depth of bottom milling 15 mm diameter of face drill embedment and bottom milling cutter 10 mm Drill head (face drilling): spindles 4 axial spacing of spindles 32 ; 32 ; 40 mm linear arrangement of spindles max. depth of face drilling 60 mm installed power 7 kW Fgedpeq Ii Dljfx Aa Nsb working pressure 0.6 Mpa overall dimensions (length / width / height) 4300 / 1600 / 1570 mm Machining units The machine is equipped with two machining units. The left unit, which is fixed, and the right unit - a sliding unit. Each machining unit consists of the following sub-assemblies - units: a main saw, an undercutting unit, a drilling unit that drills into the jammed plane, and a drilling unit that drills into the bottom of the workpiece. Bottom hole drilling unit The described aggregate is installed as an option. It is used in the processing of corner ties for doorframes with adjustable width. It makes a blind bore , for the can connector. The picture shows the mounted red cover which is at the same time the base for the machined angle strips and the cover with chip extractor. Workpiece pressure The machine tool is also equipped with a clamping system operating in two planes. The clamping area includes horizontal and vertical clamps. The horizontal clamps are responsible for pressing against the vertical bases and straightening the workpiece. Vertical ones, on the other hand, are responsible for immobilizing the workpiece during machining. The horizontal pressure always precedes the vertical pressure. Control The machine's control is clear, easy to use and functional. It allows switching on or off all aggregates separately, additionally with division into left and right sides. All aggregates have independent drive. The right-hand processing unit is set by pressing the control buttons on the control panel. The executive mechanism is a gearbox with an electric motor driving a trapezoidal screw. An electronic control system US with an operator panel and digital display is used to read and set the length of the workpiece. This system is also responsible for automatic corrections to the counter readings when the cutting angles change by 45° and 90°. In addition, it is responsible for automatic basing.

Condition: new, Year of construction: 2026, Comparable to: e.g. Emmegi Double mitre saw for steel Cutting length: 5,000 mm Equipped with 7 NC axes for length positioning, outward and inward saw blade inclination, saw blade feed, and saw motor speed control Torsion-free welded construction with longitudinal linear guideways 2 x saw motors, each 4.5 kW Saw blade speed: 0–250 rpm Saw feed motorized from rear to front Feed speed infinitely adjustable Motorized angle adjustment between 135° and 45° Suitable for HSS circular saw blades, Ø 400 mm Pneumatic protective covers Water cooling with pump and coolant tank Left saw unit fixed to the base frame, right unit motorized and traversable Positioning accuracy: ± 0.15 mm Max. traverse speed: 25 m/min Length positioning compensates for saw angles and profile height Each saw head fitted with three horizontal and vertical profile clamps; in the event of pressure loss, the horizontal cylinders remain clamped Pneumatically swivelable material support between the saw heads 15” touchscreen Single cut processing Processing of cutting lists Creation of cutting lists via keyboard Fodpfxsyinu Hj Aa Nsgb Import of cutting lists via USB flash drive or network interface Corner cutting Overlength cutting Short cuts from 5 mm cutting length Crosscuts Available options: Micro-spraying unit Saw head inward inclination increased to 150° Label printer Barcode scanner Additional network interface and teleservice agreement

Year of construction: 2016, condition: used, We offer this used double mitre saw FomIndustrie BLITZ ALVA 550 A, year of manufacture 2016. Type: BLITZ ALVA 550 A Code: XZ 10727 Serial number: C0800165 Tool speed: 2800 rpm Max tool diameter: 550 mm Bore diameter: 32 mm Fgedpfxsyt Ev Aj Aa Neb Electrical supply: 3F400VCA50HZ Power consumption: 5.4 kW Year of manufacture: 2016 Maximum weight: 1900 kg If you have any questions or need more information, please feel free to send us a message or call us.

Condition: good (used), Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner -Double miter saw: Saw unit right and left -Saw unit: swivels 45° -Motor: Bauknecht 2.5 kW / 2850 rpm -Saw blade: Ø 420 x 30 mm -Price/Fee: complete Fjdogylq Iopfx Aa Negb -Overall dimensions: 1200/800/H690 mm -Total weight: 234 kg

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Semi automatic double head cutting machine used for alu/PVC profiles. Fgsdpjygwt Hjfx Aa Neb Very good condition, in production.

Condition: used, Technical details: saw blade diameter: 420 mm cutting lenght max.: 5000 mm cutting range: H x B: 180 x 100 mm Fedpsu Nigwjfx Aa Njgb air pressure - required: 6 bar mitter cutting - both sides: 45° - 90° (manuell) ° voltage: 380 / 220 V total power requirement: ca. 8,0 kW weight of the machine ca.: auf Anfrage t dimension machine xH: 6,4 x 1,3 x 2,0 m Circular saw with 2x sawhorses for cutting profiles with inclined cuts up to 45°. microprocessor positioning control BECKHOFF E 70-300 with absolute encoder, digital display travel per saw block = 2350mm, motorized Clamping cylinder for each horizontal and vertical, manual flushing device hydropneumatic feed use of carbide saw blades i.D. *

Condition: used, Year of construction: 2007, functionality: fully functional, Used machine Year of manufacture: 2007 Product information: Max. cutting length: 6,000 mm Max. saw blade diameter: 380 mm The saw heads can be continuously swiveled from 0° to 45° to the left and right, allowing for both external and internal dimension cuts. Indexing points at 15°, 30°, and 45° Hydropneumatic saw feed for precise cutting, infinitely adjustable with rapid traverse Vertical and horizontal pneumatic material clamping devices ensure optimal profile fixation E 111 Electronics: Manual cutting length adjustment with digital display E 111 Switching between absolute measurement and chain measurement Retention of the displayed actual value in the event of power failure Technical Data: Fgjdpfxjyu Hups Aa Neb Minimum cutting length: 520 mm Electrical connection: 400 V, 3~, 50 Hz Power output per motor: 3 kW Compressed air connection: 7 bar The following accessories are also included: 1x Fixed workpiece support

Condition: good (used), Year of construction: 1995, machine/vehicle number: 40105, Offer 26053 Technical Data: - Saw blade diameter: 550 mm - Max. cutting length: 6000 mm Fsdpfeyiz Hcsx Aa Nsgb - Minimum cutting length at 90° + 45°: 350 mm - Cutting area, e.g. 90°: 110 x 390 mm - or as per diagram - Swivel range inward, pneumatically: 90° - 45° - Tilt range inward, pneumatically: 90° - 45° - Saw blade speed: 2800 rpm - Drive: 380 V / 2 x 4000 W - Space required approx.: W 7660 x H 1600 x D 1400 mm - Weight approx.: 2100 kg - With: adjustable cutting length and angle, - separate control cabinet, automatic spray unit, - integrated roller conveyor,

Condition: new, Technical Data: Cutting range: Round 0°: 255 mm Square 0°: 200 x 200 mm Flat 0°: 320 x 200 mm Fedpfxed R Sipo Aa Nogb Round 45°: 195 mm Square 45°: 195 x 195 mm Flat 45°: 195 mm Round 60°: 125 mm Square 60°: 125 x 125 mm Flat 60°: 130 x 120 mm Round -45°: 200 mm Square -45°: 170 x 170 mm Flat -45°: 200 x 170 mm Cutting speeds: 35 / 70 m/min Saw blade: 2750 x 27 x 0.9 mm Working height approx.: 930 mm Coolant pump: 100 W Saw motor: 1.5 kW Connection: 400 V Dimensions LxWxH approx.: 2000 x 1250 x 1900 mm Weight approx.: 350 kg Features: - Double mitre saw with a pivoting saw bow from left -45° to right +60° - Ideal for cutting pipes, profiles, as well as solid VA, steel, etc. in commercial applications - Generously dimensioned cast saw arm for low-vibration operation - Two saw band speeds for optimum adaptation to the workpiece - Hydraulic downfeed cylinder - Quick-release vice for simple and fast workpiece clamping - Precise, adjustable saw band guides for optimal cutting results - CE/IEC, German documentation and German service Scope of delivery: - Saw blade - Material stop - Pressure gauge (band tension) - Carbide saw blade guides - Vice with quick-release - Integrated coolant system - Hydraulic bow downfeed - Motor protection switch - Automatic shut-off - Stand/base

Condition: new, Year of construction: 2026, machine/vehicle number: SÇ 400 S Aluminyum Pvc Çift Kafa Kesim Makinası, • Complies with CE standards. • Cutting accuracy +/- 0.1 millimeter • Automatic adjustment to two angles: 90° and 45°. • Automatic slicing at two angles: 90° and 45°. • Touchscreen color panel display • Remote connection and technical support capability • 2 x 500 mm saw blades • With Ø500 mm saw blades, max 16.5 cm cutting depth and ability to cut 2 x 80 mm profiles Fodpfsramvajx Aa Njgb • Adjustable saw speed • 6-meter cutting capacity • Block cutting feature • Unlimited language support • Unlimited measurement memory capacity • Conveyor right/left profile support unit • Profile support unit between cutting heads • Spray saw cooling system • 2 vertical clamps • 4 horizontal clamps • Air gun OPTIONS • Barcode printer • Cutting list transfer via USB memory stick • Hydro-pneumatic, hydro-check controlled saw movement

Condition: used, cutting length ca. 2.200 mm mitre angle 45° - 90° Fgsdpjw D Dfxofx Aa Nsb workpiece max. 50 x 70 mm

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 4550 PROFILE CUTTING AN PROCESSING CENTER ( 9 AXIS & 10 STATION ), - In aluminum and PVC profiles; Grooving, hole drilling, marking, cutting at different angles, etc. Ability to perform operations - 10 special air-cooled spindle motors for high-speed aluminum Fedpfx Aorcm Rusa Nsgb - Axis speeds averaging 120 m/d - Precise 3-axis profile holding station - Profile feeding capacity 7 pieces - Profile machining length maximum 6500 millimeters / minimum 600 millimeters - Automatic profile length detection - Windows-based, easily adjustable user-friendly interface - Data transfer via USB, Online remote monitoring system - Remote connection support - 23.8" Touch high-performance touchscreen - 30 - 150 degrees between, +- 0.1 degrees servo-controlled cutting unit that allows precise cutting - Transporting the cut waste profiles to the collection cart with automatic conveyor system STANDARD EQUIPMENT - Ø550 Millimeter saw - Automatic waste chip conveyor discharge unit - Barcode printer OPTIONAL EQUIPMENT - Compatibility with CAM programs - Optional length - Output conveyor with belt system - Safety barrier (Sensor)

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 258882, cutting length (max.): 6,000 mm, saw blade diameter: 500 mm, total length: 7,550 mm, total width: 1,700 mm, total height: 1,740 mm, type of input current: AC, input voltage: 400 V, overall weight: 1,450 kg, the machine is used and it's in good condition Fgodpfx Aajyt Sf Rs Nsb

Year of construction: 1983, condition: good (used), RÜCO double crosscut saw Type 22 Year of manufacture 1983 S/N 10860 Working range : cutting size 2600 x 2200mm smallest cutting width 210mm cutting height 100mm with saw blade Ø 450 = 125mm Technical data: Saw blades each 45° tiltable 2 X main motor 4,0 KW, saw blade Ø 400 mm 2 X scorer 0,56 KW, saw blade Ø 140 mm Weight 1400 Kg Fgsdoin E Rqepfx Aa Nob space requirement approx. 4400 x 4000 H 1000 mm Transport dimensions approx. 4400 x 1300 H 1300 mm technical data under reserve

Condition: excellent (used), Year of construction: 2013, - Tools Ø 500 mm - Blade speed 2800 rpm Fgsdpfx Aox N R H Tja Njb - Weight approx. 1500 kg

Condition: used, band length ca. 1.700 mm + 2.700 mm cutting width max. 2.500 mm Cutting height max. ca. 80 mm Fsdpfxov Hgb Ns Aa Negb

Condition: used, working width 1.700 mm Fsdpsycqigefx Aa Nogb saw-blade dia. 350 mm cutting length 1.200 mm

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Excellent technical condition of machine. Fgjdpfx Ajwltqaea Neb

Condition: new, PILOUS double miter band saw ARG 300 plus H.F. with automatic hydraulic lifting of the saw frame Incl. special accessories: driven chip brush, belt tension indicator Roller conveyor D 400 / 3m incl. digital measuring system Roller conveyor D 400 / 3m Round: 90°300mm, -45°220mm,+45°240mm,+60°155mm Square: 90°290mm, -45°195mm,+45°225mm,+60°150mm Rectangle: 90°375 x 190mm, -45°240 x 100mm, +45°240 x 160mm, +60°150 x 150mm Main motor:400 V, 50 Hz, 2,2 kW Pump motor:400 V, 50 Hz, 0,05 kW Hydraulic power unit motor:400 V, 50 Hz, 0,18 kW Fgsdpeh S Ikkjfx Aa Neb Saw blade speed:15-90 m/min. Stepless Saw blade length:3150 x 27 x 0,9 mm Working height from vice: 910 mm Coolant tank: approx. 15 l Machine dimensions (min.) 950 x 1750 x 1600 mm machine dimensions (max.)1700 x 2000 x 2150 mm Machine weight: 645 kg

Condition: new, PILOUS double miter band saw ARG 260 plus H with automatic hydraulic lifting of the saw frame Incl. special accessories: driven chip brush, Belt tension indicator Roller conveyor D 300 / 3m incl. manual measuring system Roller conveyor D 300 / 3m Cutting range: Round:90° -45° +45° +60° in mm:260-175-200-125 Square:90°-45°+45° +60° in mm:255-145-185-120 Rectangle:90°-45°+45° +60° in mm.300 x 200-190 x 100-185 x 200-125 x 120 Main motor 400 V, 50 Hz, 1.4 kW Pump motor 400 V, 50 Hz, 0.05 kW Fgsdsilqbuspfx Aa Nob Motor from hydraulic unit 400 V, 50 Hz, 0.18 kW Saw blade speed 35/70 m/min. saw blade length 2880 x 27 x 0,9 mm working height from vice 910 mm Oil in hydraulic system approx. 6 l (ISO 6743/4-HM, DIN 51 524 part 2-HLP) Coolant tank approx. 15 l Machine dimensions (min.) 950 x 1650 x 1450 mm Machine dimensions (max.) 1550 x 1850 x 2050 mm Machine weight 490 kg

Condition: new, PILOUS Double miter band saw ARG 260 plus E Incl. special accessories: driven chip brush, band tension indicator. Cutting range: Round:90° -45° +45° +60° in mm.260-180-200-125 Square:90°-45°+45° +60° in mm. 240-160-185-105 Rectangle:90°-45°+45° +60° in mm. in mm.300 x 185-190 x 105-185 x 295-125 x 105 Main motor 400 V, 50 Hz, 1.4 kW Fgodpfx Asilqd Noa Neb Pump motor 400 V, 50 Hz, 0.05 kW Saw blade speed 35/70 m/min. saw blade length 2880 x 27 x 0,9 mm Working height from vice 900 mm Coolant tank approx. 15 l Machine dimensions (min.) 1690 x 750 x 1430 mm Machine dimensions (max.) 1980 x 1510 x 2040 mm Machine weight 310 kg