Used Double Sided Planer for sale (28,404)

Condition: excellent (used), CATALOGUE NUMBER 7554 Technical data: - width of rollers 1350mm - max. throughput height 70mm - application of glue on one and both sides - 2-roller - diameter of rollers applying glue top/bottom 160mm - main engine 0.75kW - dimensions length/width/height 2000x750x1550mm Gsdpfxjvy Tt Es Aabokc - weight about 534kg ADVANTAGES - German production - used glue applicator - very good condition Net price: PLN 13900 Net price: EUR 3270 depending on the price EUR 4.25 (Prices may change with higher fluctuations)

Condition: used, Double-sided cantilever rack for bar stock (custom-built) Height: 1.9 meters Rack length: 4.3 meters Frame spacing: 2000 mm Arm depths: 600 / 500 / 450 and 400 mm Load capacity per arm: approx. 200 kg Load capacity per level (per bay with 3 uprights): approx. 600 kg Total load capacity with 3 uprights: approx. 4800 kg Base width: 1000 mm - 3 uprights = 2 bays = Ideal for 6 meter bar stock - Uprights made of 100 x 50 x 9 mm U-profile Godpfx Aajxf Ut Hsbskc - Support arms made of 100 x 50 x 7 mm U-profile - 8 arms per upright (total 24 welded arms) - 3 double-sided uprights with base - Bolted upright connectors made of rectangular tube - Diagonal bracing is missing Assembled dimensions (L x W x H): 4400 x 1450 x 1900 mm Transport dimensions (L x W x H): 2100 x 1500 x 500 mm Total weight: 350 kg

Condition: used, machine/vehicle number: 005939, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt, PUR Combination Squaring Edgebanding Machine: First Pass Gkedpfxowcyaij Aabsc Max Panel Width: 1500 mm Max feed speed: 40 m/min Operating Units Right Side: 11 nr Operating Units Left Side: 11 nr

Condition: used, Year of construction: 1982, pressure 30 t stroke 8 - 40 mm no. of strokes 100 - 600 /min distance between columns 330 mm dayligth (stroke and adjustment up) 280 mm column travel -side 300 mm table surface area 540 x 470 mm hole in the table 315 x 110 mm table height over floor 1000 mm ram surface 250 mm material width 120 mm material thickness - 3,0 mm feed length - 60 mm Gedsvuk Hrjpfx Aabekc power requirement 5,5 kW Weight 2,6 t dimensions of the machine ca. 1,5 x 1,2 x 2,2 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch, manual stroke adjustment, manuel ram adjustment, fix table, mechanical roll feed (Bruderer BBV 120/60) table surface 540 x 300 mm or 330 x 390 mm as is where is, WITHOUT putting into operation

Year of construction: 1990, condition: reconditioned (used), 4-sided planer unimat U23, 7 heads Godpfx Aopqxnxjabokc 4-sided Weinig 7-head planer, 7 universal arrangement: horizontal, lower vertical, right, left, vertical, right, vertical, upper horizontal, lower horizontal, and the last universal. The drive is realized by means of cardans. The drive is secured with Rotax clutches. Pressure of the element using pneumatics. Feed smoothly regulated by an inverter. Machine feed 0-42 m/min. 2.5 kW and 7.5 kW engines. Grinding table and a new one. Additionally, new wiring and new electrics. The machine has been completely renovated. Warranty .

Condition: used, Model - CR1100D Max. Width of planing - 1100 mml Min. Thickness of planing - 8 mm Max. Thickness of planing - 150 mm Min. Length of planing - 435 mm Bottom spindle speed - 4500 RPM Gkodpfxowf Hbre Aabec Electric power - 75 kW Feed drive motor - 5 HP Pressure roller elevation motor - 2 HP| Dust hood outlet dimensions - O125 mm x 1, 200 mm x 4 Cutter-head diameter - 150 mm Air pressure - 4~6 kg/cm Table height from floor - 990mm Machine dimensions (L x W x H) - 2800x2150x2000 Net weight (Approx) - 4600 kgs Gross weight (Approx) - 4950 kgs

Condition: excellent (used), CATALOGUE NUMBER 7663 TECHNICAL DATA - max planing width 510mm - max planing height 200mm - from above: - pawls - pulling shaft, toothed - clamps 2 rows - infeed pulling shaft, toothed - clamp - 510mm planing shaft, 4-knife, 7.5kW motor - clamps - pulling shaft, smooth, outfeed - clamp on the outlet 2pcs - smooth pulling shaft - from below: - clamp - adjustable infeed table + sliding roller - 510mm planing shaft, 4-knife, 5.5kW motor - 2 sliding shafts, smooth - side clamp - from the back: - side spindles 1) vertical right 140mm 4kW 2) vertical left 140mm 4kW - spindle diameter 40mm - 4-knife heads installed at a height of 120mm - spindles adjustable up/down, right/left - smooth feed speed regulation - electric table top lifting Gkedpfxewqchfo Aaboc - exhaust port diameters 3x150mm, 1x110mm - dimensions length/width/height 2300x1700x1700mm - weight 2200kg ADVANTAGES – ideal for floor processing – electric table top lifting – Czech production – used planer, very good condition Net price: PLN 36900 Net price: EUR 8680 Net price calculated according to the exchange rate of PLN 4.25/EUR (for larger price may change due to exchange rate fluctuations)

Condition: excellent (used), Weinig Unimat 23 four-sided planer Working width 230mm Working height 160mm Number of spindles 5 Arrangement of spindles Bottom 5.5kw Right Godpjtxxwdsfx Aabskc Left 7.5kw Top 11kw Bottom 5.5kw Pneumatic material presses divided into 4 sections Feed speed adjustable by variator 4-24m/min Length of input table 1980mm Drive on cardan shafts Thick soundproof cabin Machine dimensions 380x226x178cmH CE certificate

Year of construction: 2004, condition: excellent (used), planing width 230mm planing height 150mm cardan feed 3 pulling rollers in the table smooth feed adjustment - inverter 6 head heads order: 1 bottom 5.5kW 2 rights 5.5kW 3 left 5.5kW 4 upper 11kW 5 upper 7.5 kW Gkjdpfxsiqtlvj Aabsc 6 bottom 7.5kW

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, grinding width: 250 mm, grinding height: 100 mm, Double-sided Brush Sanding Machine / Strip Sanding Machine Make: Quickwood Model: QL 3 Year of manufacture: 2004 Structuring and sanding machine, double-sided operation, with a total of 6 brush units. Machine suitable for integration into a production line due to constant table height. Working width: 250 mm Passage width: 300 mm Passage height: approx. 100 mm Minimum workpiece length: approx. 500 mm Equipped with: 2x bottom brush units, each 1.5 kW, frequency-controlled, suitable for structuring and sanding 2x bottom brush units, each 1.5 kW, frequency-controlled, suitable for structuring and sanding 2x top brush units, each 0.75 kW, frequency-controlled, suitable for fine sanding Pneumatically operated pressure rollers for workpiece guidance and stabilization Gksdpowylrfofx Aabsc Feed speed infinitely variable, approx. 5 - 25 m/min. Extraction connections: 150 mm Dimensions: approx. 2045 x 1350 x 1700 mm (LxWxH) Weight: approx. 1000 kg

Condition: used, GUBISCH B230 – Four-Sided Planer For sale is a robust four-sided planer manufactured by GUBISCH, model B230, year of construction 1986. The machine operates flawlessly and is in excellent technical condition. — Technical Specifications • Machine type: Four-sided planer • Spindles: 4 units, each 7.5 kW with motor brake • Spindle diameter: 40 mm • Speed: 6,000 rpm • Tool diameter: 125 mm • Drive: Cardan shaft drive for the spindles • Planing width: up to 230 mm • Planing height: up to 140 mm • Feed motor: 1.5 kW, infinitely variable from 3.5 to 19 m/min • Feed roller diameter: 140 mm • Surfacing table length: 2,000 mm • Machine dimensions (L×W×H): 3,800 × 1,400 × 2,000 mm • Weight: approx. 2,900 kg — The machine has been tested and is in perfect technical condition. • Delivery by freight forwarding available upon request • Inspection possible at any time by appointment — Gsdjxk Twzjpfx Aabjkc Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices are net plus VAT. Subject to change and errors.

Condition: used, Year of construction: 2016, x-travel 6.500 mm y-travel 4.250 mm z-travel 1.500 mm Control HEIDENHAIN iTNC 530 HSCI table-size 7500 x 3000 x 300 mm distance between columns 3.800 mm rapid travel x/y/z 30.000 mm/min tool taper HSK 100 number of spindle speeds 6.000 U/min/rpm transmission ratio 2 Motor output 37 kW Gjdpfxexb Ed Ue Aabjkc Number of working hours 28.475 h Spindle hours 12.629 h Tools changer 60 fach/tools Internal cooling system 36 bar Chip coveyor Doppel milling head 5-Achs-Fräskopf OAD total power requirement 80 kWA weight of the machine ca. 85 t

Condition: excellent (used), functionality: fully functional, CATALOGUE NUMBER 7559 TECHNICAL DATA - loading fields 2 - manually adjustable side clamps 2x4pcs - vertical pneumatic clamps 2x4pcs - max length of glued elements 3300mm - max height of glued elements 1020mm - max thickness of glued elements 100mm - dimensions length/width/height 4270x1600x2000mm - weight about 800kg ADVANTAGES - two working fields - gluing length 3300mm - pneumatic actuators Gsdpfx Asv Dirxsabjkc - used press, very good condition Net price: PLN 10900 Net price: EUR 2570 depending on the price EUR 4.25 (Prices may change with higher fluctuations)

Year of construction: 1980, condition: excellent (used), planing width 310 mm planing height 300 mm Gkjdpfx Asiqflbeabjc four-sided planing height 200 mm bottom head motor 15 kW upper head motor 22 kW right head motor 7.5 kW left head motor 11 kW feed motor 7.5 kW electric height adjustment smooth change of feed speed

Condition: excellent (used), CATALOG NUMBER 7044 TECHNICAL DATA - Circular saw blade diameter: 250 mm - Blade bore diameter: 30 mm - Number of saw blades: 2 pcs - Minimum cutting width: 30 mm - Maximum cutting width: 150 mm - Maximum cutting height: 35 mm - Minimum raw material length: 620 mm - Top: 4 sliding rollers - Upper rollers act as material pressers - Bottom: pulling chain - At the outlet: metal sliding rollers at the top and bottom, 1 pc each - Stepless feed speed adjustment - Feed motor: 0.75 kW - Main motor: 4 kW - Extraction port diameter: 130 mm - Infeed table dimensions (L/W): 1550x350 mm - Total outlet chute dimensions (L/W/H): 3150x700x870 mm - Total machine dimensions (L/W/H): 2150x950x2050 mm - Total weight: 350 kg Godpfemih Sfsx Aabokc – Condition: very good, – used saw Net price: 7,900 PLN Net price: 1,860 EUR Net price calculated according to exchange rate 4.25 PLN/EUR (In case of significant exchange rate fluctuations, price may change)

Condition: excellent (used), Catalog number 7275 TECHNICAL DATA - max planing width 610mm - max planing height 200mm from above: - toothed, pulling input shaft - pawls - 2 clamps - toothed pulling shaft - clamp - 610mm, 4-knife 7.5kW planing shaft - clamps Gkedsrq Db Depfx Aabjc - smooth pulling shaft from below: - guide bar - adjustable input table with smooth sliding, divided shaft - 610mm, 4-knife 5.5kW planing shaft - 2 smooth, sliding, pulling shafts - side clamp from behind: - side spindles + clamps 2: 1) vertical right 5.5kW 2) vertical left 5kW - max planing height on side spindles 200mm - spindle diameter 35mm - spindles adjustable up/down, right/left 3) additional horizontal spindle 160mm, adjustable up/down + right/left + angle approx. 4kW - possibility of planing with an additional spindle from the top/bottom/side - spindle diameter 35mm - adjustable rollers in the lower table - 2 types of feed speeds - feed motor 2.2kW - diameter of the exhaust port 120mm - dimensions length/width/height 2550x1700x1350mm - weight approx. 3000kg ADVANTAGES - wide planing machine for wet and dry wood - ideal for processing logs, flooring, etc. - 2 shafts horizontal planing + 2 vertical spindles + 1 horizontal spindle - heads included - manufactured by the German brand KUPFERMUHLE - used planer, very good condition Original photos Net price: PLN 58,900 Net price: EUR 13,850 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: excellent (used), Catalogue number: 7641 ADVANTAGES – The best wide-planing machine for wet and dry wood – Ideal for processing logs, floorboards, etc. – 3 planing heads + 3 spindles – Manufactured by the German brand KUPFERMUHLE – Used planer, condition very good TECHNICAL DATA Max planing width: 800 mm Max planing height: 200 mm From above: - Power-feed, toothed infeed roller - Pawls - Pressure unit - 2 toothed feed rollers - Pressure unit - 800 mm planing head, 4-knife, 7.5 kW - Pressure units - 800 mm profiling head, 4-knife (fitted with 3 straight knives and 1 profiling knife) - Pressure unit - Smooth, powered outfeed roller From below: - Guide bar - Infeed table - Smooth feed roller - 800 mm planing head, 4-knife, 7.5 kW - 2 smooth feed rollers - Split, smooth sliding roller - Side pressure at outfeed From behind: 2 vertical side spindles + pressure units: 1) right vertical, 90 mm, 4 kW 2) left vertical, 90 mm, 4 kW - Spindle diameter: 35 mm - Alternating spindle setup - Spindles adjustable vertically and horizontally 3) additional lower horizontal spindle, 350 mm, adjustable up/down and left/right, 5.5 kW - Spindle diameter: 40 mm At outfeed: 4 upper metal sliding rollers, 2 lower rubber feed rollers - Adjustable rollers in lower table - 6 feed speed settings: 7/14/9/18/11.5/23 m/min Gsdpfxswfti As Aabekc - Feed motor: 2.2 kW - Extraction connection diameters: 3×180, 130 mm - Dimensions (L/W/H): 3100×2000×1900 mm - Weight approx.: 3500 kg Net price: 64,900 PLN Net price: 15,270 EUR based on exchange rate of 4.25 EUR (Prices may change due to larger fluctuations)

Condition: excellent (used), CATALOG NUMBER 7503 TECHNICAL DATA: - max planing width 610mm - max planing height on both sides 200mm - max planing height on four sides 100mm from above: - 2 rubber pulling rollers - 2 toothed pulling rollers - metal pulling roller - pulling input shaft, toothed - pawls - pressure - pulling shaft, toothed 2pcs - pressure - planing shaft 610mm, 4-knife 7.5kW - pressure - pulling roller, smooth, metal - pressure - profiling shaft 7.5kW - pressure - rubber pulling roller from below: - planing shaft axis 35mm, axis length 130mm 2.2kW - guide strip 2pcs - feeder table - smooth pulling shaft - planing shaft 610mm, 4-knife (2 knives installed) 7.5kW - 2 pulling shafts, smooth - sliding roller, metal, divided - side pressure at the back: - side spindles + pressures 2 - 1) vertical right 95mm 4kW - 2) vertical left 95mm 4kW - spindle diameter 35mm - adjustable spindles up/down, right/left Gksdpfx Aaovah S Noboc - adjustable rollers in the lower table - electric setting of planing thickness - 6 types of feed speed 7/9/11.5/14/18/23m/min - feed motor 3.1kW - diameters of the extraction nozzle 3×120, 3x160mm - dimensions length/width/height 3150x1900x1600mm - weight about 3500kg ADVANTAGES: - the best wide planing machine for wet and dry wood - ideal for processing logs, flooring, etc. - additional profiling shaft and planing shaft (undercutter) - 4 horizontal planing shafts + 2 vertical spindles - manufactured by the German brand KUPFERMUHLE - used planer, very good condition Net price: PLN 66,900 Net price: EUR 15,740 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: excellent (used), Catalog number 7734 TECHNICAL DATA - Shaft width: 630 mm - Max workpiece thickness: 230 mm - 4-knife planing shaft Gkjdpfx Ajxb Tadeaboc * Top section: - Anti-kickback fingers - Serrated infeed roller (pulling) - Pressure bar - Planing shaft - Pressure bar - 2 smooth outfeed rollers (pulling) * Bottom section: - Adjustable roller in lower table - Motor approx. 7.5 kW - Stepless feed speed adjustment - Dust extraction port diameter: 145 mm - Dimensions (L/W/H): 1250x1300x1300 mm - Weight: 908 kg ADVANTAGES – Italian manufacturing – Very good condition – Used thickness planer Net price: 21,900 PLN Net price: 5,150 EUR depending on exchange rate of 4.25 EUR (Prices may change according to currency fluctuations)

Condition: excellent (used), Catalogue No. 7713 TECHNICAL DATA - Max. working width: 240 mm - Max. working height: 130 mm - 6 spindles: 1) Lower horizontal 240 mm, 7.5 kW 2) Right vertical 130 mm, 5.5 kW 3) Left vertical 130 mm, 5.5 kW 4) Upper horizontal 240 mm, 7.5 kW 5) Upper horizontal 240 mm, 5.5 kW (spindles 4 and 5 electrically adjustable up/down) 6) Lower horizontal 240 mm, 5.5 kW - All spindles adjustable up/down, right/left - Spindle diameter: 40 mm * From above: - 8 metal, toothed infeed rollers, including 3 double rollers - 4 rubber outfeed rollers, smooth, including 2 double rollers * From below: - 3 smooth feed rollers - 3 side pressure rollers - Infinitely variable feed speed control via inverter - Pneumatically pressed rollers - Feed motor: 7.5 kW - Kardan shaft drive feed - Electrically adjustable planing thickness - Body lifting motor: 0.75 kW - Infeed table length: 2480 mm - Pneumatic opening/closing of the safety cover - Pneumatic table blow-off - Centralized table lubrication - Extractor port diameters: 3x120 mm, 3x150 mm - Dimensions (LxWxH): 5300 x 1700 x 1800 mm - Weight: 5000 kg ADVANTAGES - Made in Italy - 6-head configuration - For wet and dry timber - Pneumatic safety cover opening - Pneumatic table blow-off - Spindles 4 and 5 electrically adjustable - Used planer, very good condition Gkjdjw H Aqxopfx Aabec Net price: 136,900 PLN Net price: 32,200 EUR (based on exchange rate 4.25 EUR) (Prices may change with significant fluctuations)

Condition: excellent (used), Catalog number 7640 ADVANTAGES – the best wide planing machine for wet and dry wood – ideal for processing logs, flooring, etc. – 2 planing shafts + 3 spindles – manufactured by the German brand KUPFERMUHLE – used planer, very good condition TECHNICAL DATA - max planing width 610mm - max planing height 200mm - from above: - input pulling shaft, toothed - pawls - pressure - 2 pulling shafts, toothed - pressure - 610mm planing shaft, 6-knife 15kW - pressures - pulling shaft, smooth, output - from below: - side pressure at the input - guide strip - input table - pulling shaft, toothed - 610mm planing shaft, 6-knife 7.5kW - 2 smooth pulling shafts - side pressure at the outlet Godjwgayqspfx Aabokc - at the back: 2 side spindles + pressures: 1) vertical right 200mm 15kW 2) vertical left 200mm 15kW - left vertical spindle electrically adjustable right/left - spindle diameter 40mm - spindles set alternately - spindles adjustable up/down, right/left 3) additional horizontal lower spindle 160mm, adjustable up/down + right/left 5.5kW - spindle diameter 35mm - at the outlet: 2 upper metal sliding rollers, 2 lower pulling rollers, rubber - adjustable rollers in the lower table - electric planing height adjustment - 6 types of feed speeds 12.8/16.3/20/25.6/32.6/40m/min - feed motor 8kW - diameters of the exhaust port 2×120, 2x160mm - dimensions length/width/height 2980x1980x1800mm - weight about 3500kg Net price: PLN 66900 Net price: EUR 15740 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: excellent (used), Catalogue number: 6747 TECHNICAL DATA - Maximum planing width: 170mm - Maximum planing height: 130mm 7 spindles: 1) Bottom horizontal 170mm 4kW 2) Right vertical 130mm 5.5kW 3) Left vertical 130mm 5.5kW 4) Second right vertical 130mm 5.5kW 5) Top horizontal 170mm 4kW - 5th spindle electrically adjustable up/down 6) Second bottom horizontal 170mm 5.5kW 7) Universal 170mm, adjustable up to 180°, 7.5kW - Spindle diameter: 35mm - All spindles adjustable up/down and right/left - 6 toothed feed rollers from above, including 2 double rollers - 4 upper rubber outfeed feed rollers - Pneumatically pressed feed rollers - 1 lateral pressure roller - 2 table fence guides - Electrically adjusted planing thickness: 0.37kW - Infeed table length: 2480mm - Infinitely variable feed speed - Feed motor: 2.2kW - Extraction nozzle diameters: 1x135mm, 5x120mm - Dimensions (LxWxH): 5550x1900x1660mm - Weight: approx. 3500kg ADVANTAGES – Made in Germany – 7-headed – Universal spindle – Used thickness planer, condition: very good Gkodpfxoik E Ige Aabec Net price: 27,900 PLN Net price: 6,570 EUR Net price calculated at an exchange rate of 4.25 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 6679 TECHNICAL DATA - max. width of the processed element 250mm - max. height of the processed element 170mm 6 spindles: 1) horizontal lower 250mm 5.5kW 2) vertical right 170mm 5.5kW 3) vertical left 170mm 5.5kW 4) horizontal upper 250mm 7.5kW 5) horizontal lower 250mm 7.5kW 6) universal 250mm, adjustable at an angle of 360° 5.5kW - 6 electrically adjustable spindles up/down - all spindles adjustable up/down, right/left - spindle diameter 40mm - 6 input rollers, pulling, toothed, including 2 double - 6 output rollers from above, pulling, rubber, smooth, including 2 double - 2 pressures from above Gedpfx Aajlrvhyjbokc - toothed, pulling, torsional input roller in the table before the first spindle - 2 pulling, metal, smooth output rollers from below - 4 side pressures from below - feed on Cardan shafts - pneumatically pressed rollers - smooth feed speed adjustment on the inverter 6-30m/min - 4kW feed motor - working pressure 8-10bar - electric adjustment of planing thickness - 1.1kW body lifting motor - central table lubrication - length of the input table 2180mm - diameter of the extraction nozzles 6x150mm - dimensions length/width/height 5000x1800x1900mm - weight approx. 4600kg ADVANTAGES – Italian production – 6 heads – DTR + CE documentation – ideal for wet and dry wood – universal spindle – perfect condition / like new Net price: PLN 134,900 Net price: EUR 31,750 Net price calculated according to the exchange rate of PLN 4.25/EUR (in case of greater exchange rate fluctuations, the price may change)

Condition: excellent (used), Four-Sided Planer WEINIG HYDROMAT 22 AL - Maximum working width: 220 mm - Maximum working height: 130 mm - 8 spindles: 1) Bottom horizontal, 220 mm, 5.5 kW 2) Right vertical, 130 mm, 7.5 kW 3) Left vertical, 130 mm, 7.5 kW 4) Right vertical, 130 mm, 5.5 kW 5) Top horizontal, 220 mm, 11 kW (spindle with electric height adjustment) 6) Bottom horizontal, 220 mm, 5.5 kW 7) Bottom horizontal, 220 mm, 5.5 kW (spindle with support and Jointer system for cutterhead sharpening) 8) Universal, 220 mm, 360° adjustable, 7.5 kW - All spindles adjustable vertically and horizontally - Spindle diameter: 40 mm Feed system from above: - 6 double-toothed powered feed rollers + 1 single roller - 3 double smooth rubber outfeed rollers + 3 single rollers - Length counter Feed system from below: - Powered toothed infeed roller, swiveling in the lower table - 3 smooth metal feed rollers - Feed via Cardan shafts - Pneumatically pressed rollers - Infinitely variable feed speed + 2 speed ranges: 10–60 m/min - Feed motor: 10 kW - Electric adjustment of planing thickness - Lifting motor for main assembly: 0.75 kW - Centralized table lubrication Gkodpfjw Ipicjx Aabjc - Extraction port diameters: 5 x 140 mm, 3 x 120 mm - Machine dimensions (LxWxH): 4680 x 1780 x 1850 mm - Control cabinet dimensions (on pallet): 1020 x 1000 x 2230 mm - Weight: approx. 5000 kg Feeder with center guide: - Roller width: 450 mm - Infeed: 1 powered toothed roller - 22 smooth powered rollers - Adjustable top pressure - Feeder length: 9020 mm - Infinitely variable feed speed: 10–60 m/min - Motor: 0.75 kW - Dimensions (LxWxH): 9020 x 790 x 1150 mm Net price: 180,000 PLN Net price: 42,350 EUR (based on exchange rate of 4.25 EUR) (Prices may vary with significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number: 7715 TECHNICAL DATA - Maximum workpiece width: 220 mm - Maximum workpiece height: 130 mm - 8 spindles: Gksdpfx Ajw Ipcvjabec 1) Bottom horizontal 220 mm, 5.5 kW 2) Right vertical 130 mm, 7.5 kW 3) Left vertical 130 mm, 7.5 kW 4) Right vertical 130 mm, 5.5 kW 5) Top horizontal 220 mm, 11 kW — 5th spindle adjustable electrically up/down 6) Bottom horizontal 220 mm, 5.5 kW 7) Bottom horizontal 220 mm, 5.5 kW — 7th spindle with support + Jointer system (cutterhead sharpening) 8) Universal 220 mm, 360° adjustable, 7.5 kW - All spindles adjustable up/down, left/right - Spindle diameter: 40 mm From above: - 6 infeed traction rollers, double-toothed + 1 single unit - 3 outfeed traction rollers, rubber, smooth, double + 3 single units - Meter counter From below: - Infeed, toothed, traction roller, swiveling, in lower table - 3 smooth metal traction rollers - Feed on Cardan shafts - Pneumatically pressed rollers - Stepless feed speed adjustment + 2 gears, 10–60 m/min - Feed motor: 10 kW - Electric thickness adjustment - Body lift motor: 0.75 kW - Central table lubrication - Extraction outlets diameter: 5x 140 mm, 3x 120 mm - Machine dimensions (LxWxH): 4680 x 1780 x 1850 mm - Control cabinet dimensions (on pallet): 1020 x 1000 x 2230 mm - Weight: approx. 5000 kg ADVANTAGES – 8-head configuration – Universal spindle – Perfect for wet and dry wood – Made in Germany, WEINIG brand – Unpainted – Very low operating hours – Used planer, in excellent condition Net price: 165,900 PLN Net price: 39,030 EUR (depending on EUR exchange rate 4.25) (Prices may vary with greater fluctuations)