Used Drilling Machinery for sale (75,719)

Year of construction: 2009, condition: used, Two-colour rotary flexographic printer with integrated slotter and stacker. TECHNICAL DATA: Year of production: 2009 Factory number: 0904K02 Max speed: 70 pcs/min Economical speed: 50 pcs/min Max. sheet: 3000 x 2000 mm Min. sheet size: 600 x 350 mm Max. print: 2900 x 1900 mm Cardboard thickness: 2-10mm Film thickness: 4-7mm Axial correction: ± 8mm Max slot length: 350mm Slit width: 7mm Main motor: 7.5 KW Total power: 15 kW Hedshbvq Hopfx Aameh Overall dimensions: 6000mm x 3050mm x 1900mm Weight: 28000 kg DESCRIPTION: Includes commissioning, technology, training, start-up warranty.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: GM-1400H, total width: 3,000 mm, total length: 5,000 mm, total height: 3,250 mm, type of input current: three-phase, energy consumption: 60 kWh, input current: 80 A, workpiece weight (max.): 2,720 kg, power: 48 kW (65.26 HP), workpiece height (max.): 950 mm, warranty duration: 1 months, working range: 319 mm, number of chambers: 3, Equipment: adjustable chassis, Conveyors are produced in such a way that they will not scratch the glass and leave no stains. The machine is made of steel and aluminum materials. Thanks to specially designed water sprays and brushes, the glasses comes out completely free from oils, stains and dust and cleaned. Angles of water nozzles will be adjustable. Conveyor rollers are produced of Ø 55 mm vulcanized rubber . Induction hardened gears are used in transmission gears. There will be 3 Washing Cabins, pre-washing, washing and rinsing washing system. In the pre-washing section, the upper and lower surfaces of the glass are washed with high-pressure spray nozzles. In the same cabin ,will be compressed air to the upper surface of the glass with air knife and the water will be completely cleansed. Thanks to this process, the glasses will go into the wash without entering the brush washing compartment, free from their dirt. There are 6 Brushes (Ø 120 mm.) in the Washing Machine and they will be able to wash laminated glasses. 2 of the brushes will be in the inlet (pre-wash) and 4 in the outlet (rinse-wash). there are brushes in total, 2 piece of them at the entrance and 4 pieces at the exit. 2 of the brushes will be suitable for laminated glass washing. the other 4 brushes will be for normal standard use. Hsdpfx Aor Ak Exeamjh Features of brushes to wash laminated glass is ; Bristle material will be 6.6 P.A. The bristle diameter will be 0.15mm. The bristle length will be between 30-35 mm. Brush shaft will be produced of ASI 304L quality stainless material. During washing, the brush suitable for the laminated coated glass, whose properties are given above, will come into contact with the surface of the glass. To the other part of the glass will come into contact standard glass washing brush. The washing and air drying section will have an elevator system with a 350 mm opening and closing structure for maintenance and cleaning. Thanks to the elevator, the glass thickness (3-19 mm) can be adjusted easily. The speed of the conveyors will be adjustable between 0 m/min and 5 m/min. There will be a sound insulation cabinet in the drying fan. 1 piece of G4 filter and 1 piece of F7 filter will be at the air inlet of the drying fan . The filters will be of standard size and can be changed and will be 592*592*20 mm square type. 23. Thanks to the powerful air knives, the glasses will come to the exit conveyor dry. The height of the air knives will be adjustable. All pipes and hoses in the machine will be in a matte color to prevent algae formation in daylight. 26. Digital displays and many electronic equipment will be Delta or Schneider brand. There will be a stop sensor at the exit of the conveyor to prevent the glass coming from the machine from falling to the ground. There will be lighting system in the washing exit area for quality control from the bottoms and top of the conveyor towards the glasses. These lightnings will have the ability to be switched on and off separately. There are 3 separate water tanks in the machine. There will be an overflow water line that will prevent the water in the water tanks from overflowing.

Condition: ready for operation (used), Year of construction: 1992, A semi-automatic tube filling and sealing machine Norden Machinery with chute and vacuum tipper is available. Filling volume range: 1ml-300ml, container volume: 90l, filling capacity: approx. 140tubes/min, machine dimensions X/Y/Z: approx. 2500mm/1400mm/2400mm, weight: approx. 3300kg. Documentation available. An on-site inspection is possible. Hedpexn Aagefx Aamsh

Condition: good (used), Year of construction: 2007, Yeo Sheng Machinery TSH-TUVB-1010 Keyway Broaching Machine Hodpsx D Dihsfx Aamoh Capacity: 10 Ton Includes various tools The machine is in good working condition. Location: Hamont-Achel, Belgium The seller is not liable for typographical or transmission errors. The machine's appearance, technical condition, and wear correspond to its age; used machines are sold without warranty. The displayed price is exclusive of VAT.

Condition: new, Year of construction: 2024, A vineyard post roll forming machine is used for vineyards and orchards to produce the stakes and posts. Normally, grape posts are 1.5-2mm thickness. The production line consists of Decoiler, Servo Feeder Straightener, Press, Stamping Tool, Roll Form Machine and Shear. Hedpfot Tcz Uex Aameh

Condition: like new (used), functionality: fully functional, Year of construction: 2025, Introducing the Automatic 40 Ton Servo Punch Press Machine. Built for precision and flexibility, it boasts six tool stations, dual-servo control for dynamic X Y punching, and a powerful 22 kW hydraulic punch drive. With speeds up to 90 cycles per minute and an auto scrap conveyor, this servo punch press delivers seamless performance—quietly, efficiently, and intelligently. Watch how it adapts, executes, and excels. Notable Features: • Robust Punching Power With 40 metric tons of punching force, this machine delivers consistent performance and handles a wide range of sheet materials with ease. Hedpfsw I N H Uex Aamoh • Multi Tool Versatility Equipped with 6 tool slots, it supports simultaneous loading of multiple punch tools, enabling fast tool changes and maximizing uptime. • Precision X Y Servo Control Dual servo motors govern the Y axis with high sensitivity and coordinate with servo feeder systems to punch at any X & Y coordinate—ideal for complex part layouts. • Efficient Hydraulic Drive A dedicated 22 kW hydraulic pump powers the punching mechanism, combining servo responsiveness with hydraulic force for reliable output. • High-Speed Punching Capable of up to 90 punches per minute, it delivers both speed and agility to meet demanding production schedules. • Integrated Scrap Management Outfitted with an automatic scrap conveyor, it ensures continuous operation by efficiently removing punched material waste. _____ Why Servo Punch Press Technology Stands Out Our machine leverages the cutting-edge advantages of servo press systems, which far surpass traditional mechanical or hydraulic presses: • Exceptional Precision & Programmability: Servo-driven systems offer tight control over force, speed, and position, ensuring consistent results and the flexibility to fine-tune stroke profiles. • Energy Efficiency & Sustainability: Power is used only during punching operations—resulting in substantial energy savings and reduced operational costs. • Quiet, Controlled Operation & Lower Maintenance: Compared to conventional systems, servo presses run with less noise and fewer mechanical wear parts, boosting workplace comfort and reducing downtime. • Enhanced Safety & Monitoring: Advanced feedback controls and real-time monitoring help detect anomalies early, minimizing risk and improving overall process reliability. • Ultimate Flexibility with Programmable Motion: Custom stroke profiles, dwell times, and speed modulation empower operators to adapt instantly to varied parts and production requirements.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, sheet thickness aluminum (max.): 10 mm, coil weight: 30,000 kg, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness copper (max.): 10 mm, sheet thickness brass (max.): 10 mm, cutting speed: 1,00,000 mm/min, product height (max.): 6 mm, working width: 2,000 mm, total width: 6,000 mm, total length: 35,000 mm, total height: 3,000 mm, feed roller diameter: 156 mm, Professional Coil Slitting Line 0.3 - 3 mm x 1500 mm x 15 Ton We offer accurate and fast cutting & slitting for coil materials; Stainless Steel, Aluminum, Copper, Galvanized, Brass, and Bronze. Hodswutlvspfx Aameh BOSPORAS’s Cut to Length & Slitting Line Machinery is a certain solution for various Materials and Dimensions, for your customized projects with heavy coil industries. Easy Operation with High-Level Automation. High Quality and Maximized Efficiency with Minimized Operation Cost High Capacity with Compact Design Project-Specific Straightening Designs for Top Quality Surface Accuracy Precision Production with Material-Specific Quality Rollers and Transfer System High Quality Cutting without Scrap Automated Stacking System Solutions Double Head Hydraulic Expansion Decoiler with Transmission Box Coil Car Match Leveler Slitting Head Hydraulic Shear Tensioner and Separators Hydraulic Expansion Recoiler Loop with Sensors Automated Hydraulic Bridges Exit Coil Car Quick Slitting Knife Change Coil Tilting Car

Condition: new, Year of construction: 2024, Sheet Metal Stamping Punching Embossing Perforating Tool Die Hsdpfx Aet Tfv Uoamoh

Condition: like new (used), Year of construction: 2025, coil weight: 30,000 kg, number of straightening rollers: 9, conveyor belt width: 2,000 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness steel (max.): 10 mm, sheet thickness copper (max.): 20 mm, inner diameter: 508 mm, sheet thickness (max.): 10 mm, sheet thickness brass (max.): 20 mm, product height (max.): 10 mm, outer diameter: 2,000 mm, roller diameter: 156 mm, coil width: 2,000 mm, coil outer diameter: 2,000 mm, cutting length (max.): 6,000 mm, working width: 2,000 mm, stack height: 400 mm, Coil Cut to Length Line with Stacking ( 2 - 10 mm x 2000 mm x 30 Ton) TFS Coils, Tin Plate, Galvanized, Stainless Steel, CR, HR, Brass, and Copper to be Cut to the length Teneke Sac, Aluminyum, Galvanizli Sac, Paslanmaz Çelik, HRP, DKP. Hydraulic Expansion Motorized Decoiler with Transmission Box Hydraulic Coil Car Servo Feeder Hydraulic Shear Automated Stacker COIL PROCESSING MANUFACTURER IN TURKIYE. Our cut-to-length line Our roll cutting lines that you need for cut-to-length sheets with a sheet width of 200 mm -2000 mm and a roll weight of 6,000 kg to 30,000 kg. Until recently, the iron and steel enterprises were producing sheet metal, since the coil sheet opening systems were not sufficiently developed. The developments in the coil sheet opening sector in recent years have led iron and steel businesses to produce coiled sheets. As a result of these changes in sheet metal production, the demand for coil sheet slitting and cut-to-length lines has started to increase and businesses have started to prefer the way of plating their own products. This situation also eliminates the cost of plate sheet stocking. At this stage, BOSPORAS offers solutions from A to Z, including cutting-to-length systems, uncoiling, straightening, feeding, guillotine shearing, conveyor and stacking of coiled sheets. The most distinctive feature of our Cut-to-Length Line is the cutting feature with the Rotary or Fly Guillotine shear system. It is a professional straightening thanks to the high quality and powerful Leveler Machine. And Cut to Length Line offers the possibility of automatic stacking of the materials. This is provided by the leveler cassette system.Suitable for all sheet material types from 0.3 mm to 10 mm. General features of the systems; Easy operation and maintenance with high level of automation Easy roll loading thanks to hydraulic uncoiler with loading trolley Maximum surface smoothness thanks to multiple straightening rollers Protecting sensitive surfaces with high quality rollers and carriers Burr-free and high-quality cutting automatic stacking system Lec Edpbveh E Sh Hovsac Compact design that takes up little space compared to its capacity Hsdpfxswutp Uj Aamjh Low cost, high quality, maximum efficiency.

Condition: like new (used), functionality: fully functional, Year of construction: 2025, 🔧 Innovation Meets Precision in Coil Processing 🔧 We’re proud to present our Coil Fed Laser Cutting Line – engineered for performance, precision, and flexibility. 🎥 Whether you're processing Hot Rolled, Cold Rolled, Stainless Steel, or other metal materials, our line is built to deliver unmatched results. With advanced automation and high cutting accuracy, this solution is ideal for manufacturers seeking to boost productivity and reduce material waste. Hsdowxwalopfx Aamjh ✅ Thickness range: 0.5 – 4 mm ✅ Coil width: 200 – 1600 mm ✅ Max coil weight: 15 Tons Our system combines: 🌀 Decoiler – Smooth coil feeding 🛠️ Leveler – Perfectly flat sheets 💡 Laser Cutting – High-speed, high-precision shape extraction From coil to final part – all in one continuous, efficient process. 📩 Looking to increase efficiency in your production line? Let’s connect and discuss how our solution can power your business forward. hashtag#SheetMetal hashtag#LaserCutting hashtag#CoilProcessing hashtag#Industry40 hashtag#SmartManufacturing hashtag#Machinery hashtag#Metalworking hashtag#Innovation hashtag#Fabrication hashtag#Automation hashtag#EngineeringExcellence

Condition: used, machine/vehicle number: J36860, National Machinery double-pressure press type M56, good condition, 3 pieces available Hodpfx Aaswiwpuomeh

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, Coating, laminating – additional unwinder for lamination Corona treatment – during coating of film with water-based dispersions Hjdjxwaikepfx Aamoh Working width – 1700 mm Coating speed – 0–100 m/min Material in rolls Raw material – paper (50–300 g/m²), film (0.023–0.10 mm) Substances – solvent-based adhesive, water-based adhesive Type of coating – coating head: Mayer rod, anilox roller, slot die roller Dryer – length 18 m, 7 drying sections, temperature 30°C–170°C, gas drying (blower) Roll diameter – max 1400 mm Machine includes hot air generator Detailed description available on request.

Condition: excellent (used), Year of construction: 2017, operating hours: 19,187 h, functionality: fully functional, pressing force: 140 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,500 kg, overall weight: 52,000 kg, Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 140 Year of construction 2017 Working hours 19,187 hours, stand October 2025 Press power main press 140 tons (max. 153,5 tons) Press power of pre-press 70 tons Feed channel 1,600 x 1,100 mm Capacity per cycle time 4,34 m³ Theoretic cycle time 16 sec. Bale size 1,100 x 1,100 mm Driving motor 2 x 75 kW Connected load 226 kW Full load current 428 A Tying system 5-fold vertical, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 30 tons/h bulk weight of 50 kg/cbm approx. 46 tons/h bulk weight of 100 kg/cbm approx. 82 tons/h Bale weight 800 up to 1300 kg, depends on material and bale lenght SPS controller (manuf., type) Telemecanique TSX Micro Operating panel (manuf., type) Schneider MAGELIS Touch Baler dimensions built up with hopper 13,200 x 27,000 x 7,344 mm (l x w x h) Transport dimensions only baler 13.200 x 2.750 x 3.450 mm (l x w x h) Machine weight baler approx. 52 tons Technical data chain belt conveyor: Manufacturer Bollegraaf Typ HBT 1216 Year of construction 2009 Driving motor 7,5 kW Length feeding conveyor 6,750 mm Length elevating conveyor 14,400 mm Length goose neck 2,150 mm Grade 30° Effecting width 1,754 mm Height of side wall feeding conv. 500 mm Height of side wall elevating conv. 800 mm Weight 16 t Pit dimensions 10,000 x 3,200 x 1,200 mm (l x w x d) Hjdpfxoxrta Ee Aamjh Comments: The press is currently in operation and is to be replaced by a new machine in the 2nd quarter of 2026. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, Year of construction: 2025, operating hours: 24 h, functionality: fully functional, machine/vehicle number: AVB-HELIX100ST4, total length: 6,500 mm, total width: 2,600 mm, total height: 3,500 mm, height adjustment type: mechanical, overall weight: 16,000 kg, compressed air connection: 8 bar, shaft diameter: 260 mm, warranty duration: 12 months, input voltage: 380 V, input frequency: 50 Hz, infeed height: 800 mm, control cabinet width: 600 mm, control cabinet length: 2,200 mm, control cabinet height: 2,000 mm, working length: 3,000 mm, workpiece width (max.): 800 mm, empty load weight: 16,000 kg, workpiece length (max.): 3,000 mm, rotational speed (max.): 2,800 rpm, rotational speed (min.): 3,000 rpm, FEATURES OF THE WOOD SHAVING MACHINES  Bin size: 3000 mm depending on to customer's requirement Hedpfogmbtqsx Aamsh  Hopper is equipped with the Speed Control System  The robust machine frame structure of single-piece steel construction  Heavy body structure against vibration caused by long-term use of the machine  Conveyor extraction: 1000 mm wide outfeed provided with a rubber band or PVC 4 mm thickness  Direct motor operation with an independent control panel with a digital screen,  PLC-controlled electric panel independent from the machine, minimum 5-6 meters away from the machine,  Can be operated with 380V 50-60 Hz (additional transformers can be added for foreign countries operating at different voltages, optional)  Adjustable knife heights and cutter heads  Possibility to adjust shavings thickness between 0,4 and 1,2 mm(for straight blade models)  Blades and speed can be varied to produce Large Flakes (Equestrian), Small Flakes (Poultry Layers), Fine flakes (Poultry Broilers)  To avoid downtime, a few sets of spare blades should be ordered together with each machine.  Shavings outlet: Gravity discharge from the cutter heads to the belt conveyor  easy cutter head blade adjustment system;  All cutter head blocks are moved out on the machine during the blade changing.  We are also supported by our customers with blade purchasing,  All parts used in our machines are CE certified and selected with the high-efficiency principle  Knives T.C.T. Carbide 14*14*2,0 mm CERATIZIT Made in EU, bearings COC, motors use the highest quality Turkish or imported products (WEG, SIEMENS, optional).  Automatic lubrication system for the whole machine's essential parts  All machines will be CE standards  The hydraulic system will work with the proportional valve.  Double-armed hydraulic system for the extra power of heavy-duty work  Control panel designed with AB (Allen Bradley), Siemens, Schneider, or ABB  Modem Ethernet connection for the main company  The wood shaving machine output will be on the right side or the left side  digital display screen for control in one touch  All blades Diamond 14*14 mm or 15*15 mm, 500 pcs long-life blades  Directly mounted to the cutter head for all-electric motors against losing power  Specially produced spiral helix mobile roller system with a T.C.T. carbide knife (first and only in Turkey)  Separate the control panel and the user interface panel TECHNICAL SPECIFICATIONS Number of Cutterheads 4 Length of Cutter Head 100 cm Number of Blades 500 Carbide/cutter head Power Supply 4 *37 KW = 148 KW (198,5 HP) Hopper Working Stationery Hopper Dimensions mm 3200*1200*1000 Working Voltage 380 V 50-60 Hz Conveyor Band Motor 0,75 KW Hydraulic Motor 30 KW Total Power 181 KW Cutterhead Speed 2800 rpm Cutterhead Diameter 230 mm Shaving Depth 0,03 mm - 0,05 mm Max.Log Input Length 150-310 cm Max.Log Input Width 10-90 cm Working Distance 2200 mm Machine Dimensions L6450 x H3014 x W2514 mm Weight 17.000 Kg Production capacity: 4.500-5.000 kg/h

Year of construction: 2025, operating hours: 24 h, condition: new, functionality: fully functional, empty load weight: 6,500 kg, machine/vehicle number: AVB-68HELIX, Heavy duty and robust body type of wood shaving machine, AVB-HELIX68 wood shaving machines are one of our most popular machines with a higher industrial capacity for the market. Designed to process both logs and offcuts with a minimum material size, this machine is suitable for round log shaving and wood waste processing. It is equipped with T.C.T. carbide blades and also fitted with a hopper pressing system for small pieces and the offcuts (optional). The working principle with a planer blade and carbide blades is available. TECHNICAL DETAILS; TECHNICAL SPECIFICATIONS AVB-68HELIX Number of Cutterheads 6 Length of Cutter Head 80 cm Number of Blades 240 blades/cutter head Power Supply 6 *11 KW = 66 KW (88,5 HP) Hopper Working Hydraulic Hopper Dimensions 2300*800*1100 mm Working Voltage 380 V 50-60 Hz Conveyor Band Motor 1,5 KW Hydraulic Motor 11 KW Total Power 78,5 KW Cutterhead Speed 3000 rpm Cutterhead Diameter 160 mm Shaving Depth 0,2 mm - 2 mm Max.Log Input Length 10-220 cm Max.Log Input Width 10 - 75 cm Working Distance 2400 mm Hedpfx Aasidxu Hemeh Machine Dimensions L5700 x H1700x W1600 mm Weight 5.600 kg Production Capacity 2000-2500 kg/h

Year of construction: 2024, condition: used, functionality: fully functional, machine/vehicle number: 1731124010219J, Allpax Angle Sealing Device / Packaging Machine Manufacturer: Hualian Machinery Group Model: PTHW-WS-5045 Serial No.: 1731124010219J Year of Manufacture: 01/2024 Condition: used Color: light grey Internal Item Number: 2025120105 Pick-up Address: Industriestraße 5 (47918 Tönisvorst) The machine was in operation until dismantling. Tailor-made Solutions for Your Intralogistics For roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods, as well as packaging machines, we are your competent partner! We are happy to provide you with an individual offer or advise you on system design or installation queries. Simply let us know your requirements and site conditions. Benefit from our years of experience and excellent network of experts. We have already successfully completed projects for companies in a variety of sectors, such as logistics, the pharmaceutical industry, trades, or the electronics sector. Hjdpfx Aaox Ak Nrjmsh Together, we will find ways to optimise your processes and material flow cost-effectively and sustainably. We can also offer fully automatic sorting systems or complementary components, such as picking racks or containers.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Automatic roll to roll screen varnishing printing machine LTA-5060 Maximum print area: 500 x 600 mm Material thickness: suitable for different thicknesses Hedpowkd Elsfx Aamsh Printing Material Thickness 0.02-0.5 mm (PET, PVC, ...) Screen frame 800 x 1000 mm Print speed: high-speed printing 0-2500 impression/hour Registration accuracy: accurate registration for high-quality print results The power of oven： three phase 380V 25KW 40A The power of printer：single phase 220V 3KW 15A Youtube video about similar LTA-4050 machine

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: NON, travel distance X-axis: 13,000 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,300 mm, Product name: MHL13000 Single-Sided Vertical Squaring Machine Maximum processing length: 13,000 mm Hedpfexgb Iaex Aamsh Maximum processing width: 1,300 mm Maximum processing thickness: 230 mm Rated pressure of the hydraulic system: 16 MPa Main pressure cylinder (cylinder diameter x stroke): φ100 x 100; 34 units in total Side pressure cylinder (cylinder diameter x stroke): φ50 x 150; 34 units in total Side lift cylinder (cylinder diameter x stroke): φ63 x 400; 8 units in total Side pressure plate type: Single presser foot Hydraulic motor power: 5.5 kW Hydraulic system: Manual push-button control with pressure holding and automatic pressure compensation Dimensions: 13,300 x 1,300 x 2,300 mm Net weight: Approx. 15 t 1. Relief valve and electromagnetic directional valve: Zhenping Hydraulics 2. Oil pump and motor: Shanghai Volkswagen + Guangdong Juntai 3. Hydraulic cylinders and high-pressure oil lines: Zhengtian, hand-made, with stable quality and high durability 4. Cylinder seals: Taiwan Dingji (high-performance seals)

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: SSS-522-20160308, Can process fresh or semi-defrosted fish. Able to cut the fish precisely into three pieces, remove the central bone, and extract the flesh from both sides. Reduces manual labor, increases processing speed, maintains optimum freshness. Overhauled in the workshop. Voltage – 380V / 50-60Hz; 1.5kW Hjdjw Nx Epspfx Aamsh

Year of construction: 1998, condition: excellent (used), Technical detils : - Capacity - 500 nails/ min. - Power - 7 kw - Wire range - 1,0 - 4,2 mm - Nails lenght - 30 - 150 mm Hodjh Hp H Sjpfx Aameh - Year - 1998

Condition: good (used), Year of construction: 2018, functionality: fully functional, Controller FANUC MXP-200FC Table size D380 mm Table load max 200 kg X travel 700 mm Y travel 520 mm Z travel 480 mm A axis +30/-120 degree C axis 0-360 degree Spindle speed 12000 rpm Tool holder type BBT40 Rapid speed 36/36/24 m/min Feedrate 1 - 100000 mm/min Max tool diameter and length D78 x 280 mm Max tool weight 6 kgs Hodpor I Az Tjfx Aamsh Spindle power 22,5 kW ATC magazin 30-fold Power required 46 kVA Accessories, features - CTS - integrated 4/5 axis - Coolant unit - Chip conveyor - Mist collector - external hydraulic - manuals The machine is still under power and can be inspected in function. Ready to buy.

Condition: like new (used), Year of construction: 2020, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: HU50610, Controller 15" touch screen with Windows Operation System Interface Table size 630 x 360 mm Dimension of tank LxWxH = 940 x 550 x 350 mm X travel 400 mm Y travel 300 mm Z travel 300 mm Distance between the table and chuck 100 ~ 400 mm Max weight of electrode 11/50 kgs Max weight of wpc on table 500 kgs Max Output power 50A Best surface quality of work 0,08 Ra Input power 10 kVA Hedpfxjwktkks Aamoh Dielectric capacity 300 litre Dimensions of the machine LxWxH = 1320 x 1380 x 2150 mm Weight 1450 kgs Accessories, features - No. of filters 3 pcs. - C axis (max loading 11 kg) - Dielectrictank - Machine mouths - Manuals - Handtools

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: KB-20211022002, 1 x Hangzhou Kuangbo Machinery Equipment Co. Ltd 2000L beer tank, previously used as a brite tank but can be used as an FV. Technical Specification: Model - KBBFT1300A. Serial number - KB-20211022002 Date of manufacture - 2021. Capacity - 2000 litres. Hjdpswl H Nijfx Aamjh Notes: All 1.5inch Tri Clamp connections other than DIN PRV port on top, manway door, and larger triclamp Features: Port on top for dry hopping etc. 2x thermowells, one for a thermometer at front and one for temp sensor in back & a CIP arm on the RHS, with sprayball.

Condition: like new (used), Year of construction: 2020, operating hours: 50 h, machine/vehicle number: LW250*1000, Decanter centrifuge manufactured in 2020, but put into operation in May 2021! The machine is in like new condition (used in total approx. 50 operating hours)! The decanter is for sale due to a change in technology, it works flawlessly! Manufacturer: YIXING HEAD SEPARATOR MACHINERY CO. LTD., CHINA Year of manufacturing date: 2020 Serial Number: LW250*1000 Machine signal: 02-001 Decanter indication number: 2647 Sludge formation capacity of decanter: 500 kg/h Hodpfjpu A D Asx Aamjh Main motor capacity: 7,5 KW Vice motor capacity: 3 KW Capacity: 1-5 m3/h Netto weight of decanter: 1000 kg Material of wetted parts:1.4404 Feed volume flow: 0,5t – 3t/h Stainless steel Reference number: 2590

Condition: excellent (used), REF: MM5767 1 x Adpak Machinery Systems Ltd stainless steel flow wrapper fitted with an ICE Zodiac Hawk thermal transfer printer and a fixed folding box. Model - GSP 65. Date of manufacture - 2009 approx, refurbished by Midas Motion in 2020. Sealing jaws - 300mm long. Fixed folding box - 40mm wide. Hjdsulc Sqepfx Aamjh Came out of production in 2023, this unit was previously used to individually wrap ice lollies.