Used Drilling Machinery for sale (74,648)

Condition: new, functionality: fully functional, power: 90 kW (122.37 HP), Year of construction: 2026, Plastic squeeze dryers are a vital part of plastic film washing lines. Washed films retain up to 30% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer is a must to dehydrate the washed film, increase the density of recycled film and fibre materials, increase the capcity of the following extrusion process and further refine the quality of final plastic pellets. Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would significantly reduce the productivity of the extruder and quality of pellets. The latest development for drying and recycling washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying , and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids to dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders, as the materials are so dry and dense they can be fed direct to extruders for pellet production.With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour. Iaodpfx Amowg Sd Usyst

Year of construction: 2026, condition: new, functionality: fully functional, Complete plastics recycling line for films and fibre materials from Taiwan leading Plastics Recycling Machinery manufacturer. GENIUS Machinery Co who have more than 30 years of recycling extruder production and experience. Extruder can be fed without size reduction or shredding.. Materials in baled, loose or reel form can be fed. Line can be supplied complete with Belt conveyor, Cutter compactor, Main extruder, Filtration system, (variety of types to suit requirements), Hot pellet die-face cutting device, Centrifugal pellet dryer, Vibrating screener, Storage silo for pellets. Additional ancillary equipment can be supplied . A two stage " Cascade" version is also available for heavily printed films, or very dirty films requiring double filtration. Alternative sizes from 100 kgs per hr up to 1200 kgs per hr can be offered. Full sales and support and training is available in UK and Europe for these extremely modern and economic machines. Iaedpfowg R Rtjx Amyst

Condition: new, Year of construction: 2026, functionality: fully functional, power: 198 kW (269.20 HP), Plastic squeeze dryers / Agglomerators are a vital part of plastic film washing lines. Ijdpfxswg Sgco Amyeat Washed films retain up to 40% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer/Agglomerator is a must to dehydrate the washed film and increase the density of recycled film and fibre material. This also will increase the capacity of the extrusion process and further refine the quality of final plastic pellets. Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would be uneconomic to agglomerate on a conventional batch agglomerator. By redusing the moisture so significantly the productivity of the extruder and quality of pellets is increased exponentially. The latest development for drying and simultaneously agglomerating washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the resultant squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying where materials are still in lightweight flake form, and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids on entry to the dryer, to output dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders saving more energy, as the materials are so dry and dense they can be fed direct to extruders for pellet production. With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.

Condition: used, Year of construction: 2012, functionality: fully functional, travel distance X-axis: 800 mm, Travel (Axes) X Axis (mm): 850 Y Axis (mm): 500 Z Axis (mm): 550 Table Table dimensions (mm): 850 x 500 Max load capacity (kg): 350 Pallet change time (seconds): 12 Spindle Spindle speed (rpm): 12,000 Spindle taper: No. 40 Feed Rates Rapid traverse X/Y/Z (m/min): 36/36/36 Cutting feed rate (mm/min): 1–20,000 Tool Change System Tool holder: BT-40 Pull stud: 90° Tool magazine capacity: 32 positions Max. tool diameter with adjacent tools (mm): 75 Max. tool diameter without adjacent tools (mm): 150 Max. tool length (mm): 200 Max. tool weight (kg): 7 Tool-to-tool change time (sec): 1.5 Power Spindle motor power (kW): 11/15 Dimensions Installation footprint (mm): 3500 x 2300 x 2500 Net machine weight (kg): 6,700 MT 800P CONFIGURATION - CE conformity declaration - Fanuc 0iMD - Main transformer 380-200V/50Hz - 11/15 kW spindle motor - Spindle speed 10,000 rpm, DIRECT DRIVE - High-pressure coolant system, 20 Bar - Spindle chiller - Upgraded roller guideways - BT 40 - 32-position tool magazine - Pneumatic chip cleaning system Iajdpfoy Ayk Uox Amyot - Maintenance tool kit - Programming and maintenance manuals in Italian - Integrated work light - Chip conveyor

Condition: used, Year of construction: 1974, functionality: fully functional, machine/vehicle number: M10E/9144, Offer Number: M10E/9144 Machinetype: boltmaker 4 die 4 blow Info: bushing cut-off Make: NATIONAL Type: 8L4 Constr. year: 1974 diameter range: 8-13,5 mm number of dies: 4 Iajdpfsy Dc E Rex Amyet number of stations (incl. cut off): 7 cutting length: 127 mm shaft length under head: 95 mm output - pieces/min: 185 max. thread length: 85 mm dia. of bolt: M12 Location: Europe

Condition: used, Year of construction: 2020, Temperature-controlled processing tanks are vital in various industries, including food, pharmaceuticals, and chemical manufacturing, where precise temperature management is essential for product quality and safety. Here’s a detailed overview of temperature-controlled processing tanks: What is a Temperature-Controlled Processing Tank? A temperature-controlled processing tank is a vessel designed to maintain a specific temperature range during the processing of materials. These tanks are equipped with heat exchange systems, temperature sensors, and control mechanisms that ensure the contents remain at the desired temperature throughout the processing cycle. Key Features - Heating and Cooling Systems: - Heaters: Can be electric or steam-based to raise the temperature of the contents. - Chillers: Usually water or glycol-based cooling systems to lower the temperature. - Insulation: Tanks often come with insulation to minimize heat loss or gain from external environments, maintaining stable internal conditions. - Temperature Control Systems: Sophisticated controllers and sensors (like thermocouples) monitor and adjust the temperature in real-time, providing precise control over the processing environment. - Mixing Mechanisms: Many temperature-controlled tanks have integrated mixers or agitators to ensure uniform temperature distribution throughout the contents. - Material Construction: Typically made from stainless steel or other materials that are resistant to corrosion and can withstand high temperatures. Applications in the Food Industry - Pasteurization: Heating milk and other liquids to kill bacteria while maintaining product quality. - Cooking: Precise temperature control during cooking processes (e.g., making sauces, soups, or jams) to ensure proper texture and flavor. - Fermentation: Regulating temperatures during fermentation processes (e.g., beer, yogurt) to ensure the right conditions for microbial activity. - Storage: Maintaining the quality of sensitive ingredients (like chocolate or dairy) by controlling temperatures to prevent spoilage. Advantages of Temperature-Controlled Processing Tanks - Quality Assurance: Consistent temperatures lead to uniform product quality, flavor, and texture. Iasdpfjy E Hy Usx Amyjt - Safety: Helps in maintaining food safety standards by ensuring thorough cooking or pasteurization processes. - Energy Efficiency: Advanced control systems can optimize energy use, reducing operating costs. - Versatility: Suitable for various processes including heating, cooling, and maintaining temperatures for different food products. Considerations - Control Precision: The accuracy of temperature control systems is crucial; look for tanks with advanced control features for better reliability. - Cleaning: Ensure that the tank design allows for easy cleaning to comply with sanitation standards, especially in the food industry. - Integration: Consider how easily the tank can be integrated into existing processing lines and systems. High shear mixers are essential equipment in the food processing industry, particularly for emulsifying, blending, and homogeneously mixing ingredients with varying viscosity levels. Here’s an overview of how they work and their applications: What is a High Shear Mixer? A high shear mixer is designed to create high shear forces that thoroughly mix ingredients together. It typically consists of a rotor-stator assembly where the rotor rapidly spins, creating a vacuum that draws ingredients into the m...

Condition: like new (used), Year of construction: 2020, operating hours: 50 h, machine/vehicle number: LW250*1000, Decanter centrifuge manufactured in 2020, but put into operation in May 2021! The machine is in like new condition (used in total approx. 50 operating hours)! The decanter is for sale due to a change in technology, it works flawlessly! Manufacturer: YIXING HEAD SEPARATOR MACHINERY CO. LTD., CHINA Year of manufacturing date: 2020 Serial Number: LW250*1000 Machine signal: 02-001 Decanter indication number: 2647 Sludge formation capacity of decanter: 500 kg/h Main motor capacity: 7,5 KW Vice motor capacity: 3 KW Capacity: 1-5 m3/h Netto weight of decanter: 1000 kg Material of wetted parts:1.4404 Feed volume flow: 0,5t – 3t/h Stainless steel Reference number: 2590 Iasdpfxjpu A D Ae Amyjt

Condition: new, Year of construction: 2026, functionality: fully functional, The POWER Test indicator is designed to check the clamping force of tools in the spindle of machine tools. Iasdpfx Aeyak I Domyst Insufficient clamping force of the tool within the spindle can lead to poor machining quality and potential spindle damage. In clamping systems utilising disc springs, any spring failure results in a significant reduction of the clamping force. The POWER Test indicator provides a straightforward method to verify whether the clamping force has decreased to a critical level. Technical Specification Type: MUS02 Measurement Range: 10 – 30 kN Measurement Method: Incremental Accuracy: ±3% Repeatability: 0.3% Display: Digital, resolution 0.1 kN Units: kN Maximum Permissible Load: 75 kN Ambient Temperature: 10 °C – 30 °C Power Supply: 9 V battery Standard Adapters: SK40 and SK50

Condition: good (used), functionality: fully functional, Length: Diagonal: 250 cm Horizontal: 275 cm Iaedjv I T Rajpfx Amyet Width: 30 cm Height of rails: 4 cm

Condition: new, functionality: fully functional, power: 18.2 kW (24.75 HP), gearing type: hydrostat, fuel type: diesel, fuel consumption per hour: 1.5 l/h, fuel tank capacity: 15 l, color: blue, operation weight: 1,725 kg, lifting power: 600 kg/m, lifting height: 3,380 mm, tire condition: 100 %, drive condition: 100 %, axle configuration: 4x4, number of seats: 1, emission class: euro5, shovel volume: 0.23 m³, Year of construction: 2026, Equipment: all wheel drive, hydraulics, pallet forks, standard shovel, We offer the compact articulated loader Rippa RL06 as a brand-new machine for commercial customers. This unit is ideally suited for tight spaces in landscaping, agriculture, and construction depots. 🔥 Exclusive Service: 100 km free delivery! We will deliver the machine free of charge within a 100 km radius of 76332 Bad Herrenalb, directly to your yard or construction site. Unloading is handled easily using our company-owned truck. Current status: Machines are currently incoming. Reservations can be made immediately. As soon as delivery arrives, the machines can be inspected and test-driven at our location in 76332 Bad Herrenalb. Performance & Drive: Engine: Kubota D1105 (3-cylinder diesel, water-cooled) Power: 18.2 kW / 24.7 HP Emission standard: Stage V / EURO 5 Travel speed: 0 - 8 km/h Tyres: Off-road tires for improved traction Operating Data & Hydraulics: Operating weight: 1,725 kg (can be transported on a 3.5t trailer) Rated load (safe working load): 300 kg Maximum payload: 600 kg Maximum lifting height: 3,380 mm Maximum dumping height: 2,060 mm Hydraulic cylinders: Double-cylinder lift frame for even power distribution Operation: Single-hand multifunction joystick for forward/reverse and lift frame Dimensions: Overall width: 1,150 mm Overall height: 2,300 mm Length with bucket: 3,650 mm Turning radius (outer): 2,400 mm Features & Safety (included): Ijdpfxjyzbdto Amysat Quick coupler for tool-free attachment changes Standard earth bucket (0.23 m³) Pallet fork Operator canopy with ROPS (roll-over protection) and TOPS (falling object protection) Suspended seat with seatbelt and side safety bars LED work lights and beacon lamp CE certification Prices & Model Variants: Standard version: €12,500 net + 19% VAT (€14,875 gross) Version with telescopic arm: €14,300 net + 19% VAT (€17,017 gross) Sales exclusively to commercial customers (B2B). You will receive a proper invoice with indicated VAT. Warranty: 2 years manufacturer's warranty on spare parts. Rental with purchase option: Upon arrival of the machines, we offer weekly rental of our demonstration unit. If you subsequently decide to buy, the rental amount you have already paid will be 100% credited towards the purchase price. Logistics & Contact: Location: 76332 Bad Herrenalb We can load onto your trailer or truck free of charge on-site using a crane. If you are interested in reserving a machine or have technical questions, please feel free to contact us.

Condition: good (used), functionality: fully functional, total length: 2,300 mm, total width: 400 mm, Length 230 cm (130/100 cm) Width 40 cm Isdpfevzt Ilsx Amyeat

Condition: excellent (used), Year of construction: 2005, Mechanical guillotine shears Fab. Petersen Machinery Type. Cidan HSM-F 20/3 Year 2005 Technical data Iodou Utaiepfx Amyeat Make: CIDAN Type: HSM-F 20/3 Sheet width: 2050 mm Sheet thickness: 3 mm Cutting angle 2° Connection 400V / 20A Dimensions: approx. L 2.60 x W 1.60 x H 1.40 Weight: approx. 1.5 tons Equipment - Man. Backgauge 750mm - Continuous hold-down device with hard rubber strip - Angle fence - Extendable support table All information without guarantee. A demonstration is possible at any time in our showroom.

Year of construction: 2003, condition: excellent (used), functionality: fully functional, machine/vehicle number: 203501, No. 203501 Iasdpfxoyb S Smj Amyet Year of manufacture: 2003. Impressions: 103,255,905. Min. format: 320*280 mm. Max. format: 815*560 mm. Inspection possible. Disassembly possible. Documentation available.

Condition: used, Year of construction: 1979, functionality: fully functional, machine/vehicle number: M06L/8498, Offer Number: M06L/8498 Machinetype: double blow header Info: bushing cut-off Make: NATIONAL Type: M34 S1 Constr. year: 1979 diameter range: 1-4mm Isdpfx Amewi Sxqjysat shaft length under head: 25 mm max. cutting length: 32 mm output- piece/min: 350 Location: In our warehouse

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: M20L/8619, Offer Number: M20L/8619 Machinetype: rivet header Info: semi tubular rivets Make: NATIONAL Type: 51 Constr. year: 1980 diameter range: 5 mm shaft length under head: 40 mm Iaodpfowi Sbrox Amyst max. cut-off length: 60 mm output pieces/min: 470 Location: In our warehouse

Condition: used, Year of construction: 1977, functionality: fully functional, machine/vehicle number: M06L/8497, Offer Number: M06L/8497 Machinetype: double blow header Info: bushing cut-off Make: NATIONAL Type: M34 S1 Constr. year: 1977 diameter range: 1-4mm shaft length under head: 25 mm max. cutting length: 32 mm Iasdewi Szfjpfx Amyst output- piece/min: 350 Location: In our warehouse

Condition: used, functionality: fully functional, machine/vehicle number: M06I/9135, Offer Number: M06I/9135 Machinetype: double blow header Make: NATIONAL Type: 61LS Constr. year: diameter range: 6,35 mm shaft length under head: 70 mm cutting length: 95 mm Iasdpfeyya N Sjx Amyot output pieces/min: 300 Location: Germany

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 063/09, thread length: 50 mm, workpiece diameter (max.): 6 mm, SMART MACHINERY NG S-DD Thread Rolling Machine Fully operational, currently in production. Year: 2009 Iasdpfx Amjyycr Noyet Incoterm: EXW Calolziocorte (LC) The machine automatically sets up for stroke change. The NG S-DD thread rolling machine is equipped for changing the ram stroke depending on the length of the comb used. Minimum pass-through diameter: 1 mm. Maximum pass-through diameter: 6 mm. Maximum threaded length: 50 mm. Maximum rivet length: 80 mm. Maximum output: 700 pcs/min. Main motor power: 13.9 kW Installed electric power: 16 kW

Condition: good (used), I sell the heavy duty fourside moulder SK MACHINERY 907S. Element max. 240x150mm ! 7 spindle configuration: Bottom 5,5kW (7,5HP) / 6000 rpm Right 5,5kW (7,5HP) / 6000 rpm Left 5,5kW (7,5HP) / 6000 rpm Right 5,5kW (7,5HP) / 6000 rpm Top 7,5kW (10HP) / 6000 rpm Top 12kW (15HP) / 6000 rpm Bottom 5,5kW (7,5HP) / 6000 rpm Total power 62KW / 102 A Total weight 5000kg. Element max. 240x150mm ! Moulding heads with spiral knives fi.140x260x40mm included in price. Electronic programmer for the working width and height adjustment of the pressure zone and top spinde, aka working height. Feeding speed adjustable by inverter. Zone pneumatic pressure system for feeding wheels. Available immediately Iasdpfx Aopwdwbomyst Repair required: Bearings on one spindle which is already outside.

Condition: excellent (used), Year of construction: 1999, control type: NC control, controller manufacturer: UNIOP, working width: 2,520 mm, HM bending machine Model KSM 5 / 2500 Iaedoyx Epbspfx Amyst Year : 1999 Capacity : 2520 x 5 mm. INIOP NC control (Swiss made) Manual back gauge

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Press type JJZ-CP is designed for the production of plywood, doors, MDF board. Feeding and receiving of glued elements from the press is done automatically by means of driven rollers. The press can cooperate with glue feeders. Technical data: -max.pressure 500T/ adjustable/ -max. batch height 1300mm -max. charge size 1300x2500 -press dimension 3600x1370x4500 mm Iasdpfjtutwvsx Amyjt -Press position ~500mm below floor level -feeding table 2000x1960 mm -receiving table 2350x2500 mm -max.power 13,2 kW -CE mark

Condition: good (used), functionality: fully functional, Length: Diagonal 190 cm Iaedpfx Asv I Umvjmyjt Horizontal 90 cm Width 30 cm Height of posts 4 cm

Condition: excellent (used), Year of construction: 2021, Haining Chengda Machinery Co Ltd Shunda SMD-90 Iodpfxoignz He Amyeat 12 OZ Paper Cups The machine has inpection unit to detect if the cups are sealed correctly and if they are clean. If it detects any problem, it removes the cup. The table which collects the cups is included. Real working speed of the machine is 90 - 100 cups/minute. SMD-90 is designed to make single coated paper cups for cold and hot drinking cups. The machine is in perfect working condition and can be seen in production anytime.

Year of construction: 2010, condition: excellent (used), functionality: fully functional, 1 x Giemme Thermo Packaging Machinery S.r.l. semi-automatic shrink bundling machine. Model – ALTAIR 70 P. Isdpfsyzxgfox Amysat Serial number – 001.041.10. Date of manufacture - 2010. Speed – up to 12 packs/minute. Electrical supply – 400 V / 50 hz / 3 phase. Power – 20 kW. Overall dimensions – 3000mm long x 1200mm wide x 2000mm high.

Condition: excellent (used), Year of construction: 2015, operating hours: 3,590 h, functionality: fully functional, Equipment: documentation/manual, Corrugator-Shuttle system , ITIB MACHINERY INTERNATIONAL s.r.l. Iodpfxjv E Nwds Amyeat for producing Double wall corrugate pipe, HDPE and PP , with outside corrugated and inside smooth layer Description of the equipment • Model: Corrugator F700 - shuttle system Molds: 7 dimension of mold blocks . Each dimension include 9 pairs of molds. Die head: 7 die heads - Each dimension has its own die head Cooling mandrels : 7 pcs - Each dimension has one cooling mandrel for SN 8