Used Edge Trimmer for sale (4,070)

Condition: used, Year of construction: 2024, Bavelloni VE350-8 Straight-Line Vertical Edging Machine. Serial No. 110000297 (2024). Country of Origin: Italy Please Note: Highest bid is subject to vendor approval Dcjde Afxi Aspfx Aizsp Location: This lot is located in Burton-on-Trent, UK. A charge of £450 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Year of construction: 2021, Format: 0x0 Net Weight: 210 kg Measurements: (L x W x H) 152 x 76 x 12 Equipment: Dodjyxqw Repfx Aizjcp Mechanical speed: 300 cycles/hour Automatic Registration Mark Sensing 4-Sided Precision Trimming Dynamic Variable Formatting Delicate Media Compatibility Intuitive Control System Operation Mode: Semi-automatic/Automatic sheet feeding with sensor-driven alignment. Maximum Sheet Size (Width or Length): 74.93 cm (29.5 inches). The maximum square sheet size is 61.1 ?? 61.1 cm (24 ?? 24 inches). Minimum Sheet Size: 20.32 ?? 20.32 cm (8 ?? 8 inches). Maximum Diagonal Capability: Untrimmed raw sheet: up to 86.36 cm (34 inches)Trimmed finished sheet: up to 81.28 cm (32 inches) Maximum Cover Thickness: Up to 0.5 mm

Condition: used, Year of construction: 2013, Ashton Industrial model AIS-3350/XDIA D Refurb Edge Detection Unit/Arriser. Serial no: 8343 (2013) Dcedps Afwwgsfx Aizop Location: These lots are located in Wellingborough, Northamptonshire, UK

Condition: excellent (used), functionality: fully functional, - Belt width: 150 mm - Grinding possible on the platen or flat surface - Table angle adjustment Dodoy N N N Hspfx Aizjcp - Capability to grind curved elements - Manual table height adjustment - Motor: 3.4 kW - 380 V - Year: 1992

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 202.03.008.17, functionality: fully functional, input voltage: 400 V, input current: 28 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 12 m/min, total height: 1,693 mm, total length: 4,620 mm, total width: 1,200 mm, Equipment: CE marking, documentation/manual, FORMAT4 Tempora F800 60.08 e-motion Edgebander Manufacturer: FORMAT4 / Felder Group Model: Tempora F800 60.08 e-motion Year of manufacture: 2017 Serial number: 202.03.008.17 Location: Slovenia Well-maintained FORMAT4 Tempora F800 60.08 e-motion edgebander in very good technical condition. The machine has processed approximately 63,000 linear meters. It is fully operational, regularly maintained, and ready for production. The machine is currently connected and can be inspected and tested while powered on. Dsdjztbutjpfx Aizscp Technical data: - Feed speed: 12 m/min - Workpiece thickness: up to 60 mm - Coiled ABS/PVC edge thickness: 0.4–3.0 mm - Strip edge material: up to 8 mm - Electrical connection: 400 V / 50 Hz / 3-phase - Rated power: 11 kW - Rated current: 28 A - Required compressed air pressure: 7 bar Overall dimensions: - Length: approx. 4,620 mm - Machine width without extended front support: approx. 1,200 mm - Height with safety hood closed: approx. 1,693 mm - Required operating depth with front support extended: approx. 1,775 mm - Height with safety hood open: approx. 2,068 mm Equipment: - Pneumatic-mechanical workpiece stop at the infeed - Premilling unit with replaceable cutters - Premilling working height up to 64 mm - Infrared heating lamp - EVA glue pot - Reversing function of the glue roller - e-motion end-trimming unit with two motors - Pneumatically tilting end-trimming saws, adjustable from 0° to 15° - Tandem copying unit - Rondomat corner-rounding unit for edge thicknesses from 0.4 to 3 mm - Motorized positioning of the Rondomat unit - Radius scraper unit with pneumatic activation - Flat scraper unit for nesting applications - Release agent spray unit - Sliding agent spray unit - LED interior working lights The machine is being sold due to investment in a newer edgebander. Availability is by agreement. Dismantling, loading, and transport are at the buyer's expense unless otherwise agreed. Please contact me through Machineseeker for further information, additional photos, a video demonstration, or to arrange an inspection.

Condition: excellent (used), Year of construction: 2020, Ref:11151 . 2020 Horizon HT-300 iCE Trimmer LIKE NEW - ONLY 980 BOOKS TRIMMED! For fully automatic three knife trimming of piled or single bound books off-line. Quick, menu guided set-up, LCD on-screen instructions for lower skilled operation. Designed for either offline operation or inline connection to Horizon perfect binders. Comprising: Dcodpfjz Elvpox Aizop Stacker infeed to integral register table Digital control panel with LCD monitor for size setting and fault indication Hydraulic clamping keeps the book/pile firmly in position Diagonal cutting action for a precise finish of all three sides Corner trimming capability Including knives, tools and accessories. Specification: Maximum speed: 300 cycles/hour Stack production: Up to approx. 590 books/hour depending on feed/configuration Maximum untrimmed size: Up to 350 × 350 mm, depending on table/configuration Minimum untrimmed size: Down to 152 × 107 mm with A6 Table K Maximum trim width: 99.9 mm Minimum trim width: 2 mm (0 mm/no cut can also be selected) Book/stack thickness: 1–51 mm Pressing force: 1–7 kN, servo controlled Machine dimensions : Approx. 2,406 × 1,280 × 1,550 mm W × D × H Operation: Fully automatic setup Workflow: iCE LiNK / JDF compatible

Condition: excellent (used), functionality: fully functional, grinding capability on the inside or on a flat surface Dcjdpfx Asy N Ry Hoizop mechanical oscillation adjustable feed speed via a variator electric adjustment of the upper/lower grinding unit grinding belt height: 150 mm table angle adjustment capability to grind curved parts total motor power: 5.7 kW 1994 power supply: 380V Two belt speeds Diameter of the roller for curves: 40 mm Conveyor with pressure roller at the inside Brushing unit with angle adjustment Frame support Mobile construction CE marking External dimensions: 2300x1200x1600

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Dcjdpfx Aezyy Avjizop Equipment and technical data:

Condition: excellent (used), Year of construction: 2011, HOMAG POWER KFL 610 – complete edge banding line for batch size 1 production, year of manufacture 2011 Automated format and edge processing with laserTec, 24-position edge magazine, two BARGSTEDT portals, and automatic return system. For furniture and interior design manufacturers with varying workpiece and edge material requirements. THE BENEFITS OF THE LINE • Four-sided processing in four passes with automatic return and workpiece rotation • Barcode identification, flexible edge sequence, and setup during idle time • laserTec 3 kW for suitable functional edges; alternatively, EVA/PU adhesive processing after manual conversion • Automatic vacuum loading, conveying technology, and chain lift storage with 20 levels EQUIPMENT HOMAG POWER KFL 610/22/PU/L/25 with SI14 infeed. 2 × BARGSTEDT PROFI TBP410/40/28/12/S. 24-position roller magazine A3. RF12 format processing, joining, capping, FK23 profile milling with 2 × 8-position tool changer, multi-profile cutting tool, and finishing unit. powerControl PC22, woodLine PC52, woodScout, and barcode system. TECHNICAL DATA Base machine: workpiece length 240–2,500 mm, width 200–1,200 mm, thickness 10–60 mm. Portals: maximum 2,800 × 1,200 × 40 mm, maximum 50 kg. Laser: workpiece thickness maximum 40 mm, edge thickness maximum 3 mm. Feed rate of base machine 15–30 m/min, depending on processing and units. The 60 mm limit does not apply to the entire line. Format limits depend on orientation and processing; no blanket guarantee of overall line performance. INSPECTION AND DOCUMENTS The system was confirmed to be fully operational on 08.10.2026. Inspection with demonstration possible at the customer's location by appointment. Location: Switzerland. Technical description, layout, photos, and operating videos are available. Please provide your workpiece formats, edge materials, and available installation space so that we can arrange a suitable demonstration. Price on request. Scope of supply, current availability, disassembly, loading, and transport will be agreed upon in the individual offer. Internal reference: KL-0-26-002. Dcjdszt N Egopfx Aizep Technical specifications based on available documents; errors and prior sale excepted.

Condition: used, Year of construction: 2018, Used Machine Year of Manufacture: 2018 Special Feature: Machine with a gluing height of up to 100 mm! Condition: Factory-inspected by Lange Maschinenbau Features and Technical Specifications: - Machine table with 13 rollers for improved workpiece guidance - Edge feed, synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with blade (for cutable edges) - Three pressure rollers - Belt feed: - 0.25 kW - Approx. 1,250 mm long - Approx. 6.0 m/min - 50 mm wide toothed belt with a thick, workpiece-protective rubber covering - Digital counter for height adjustment - Direct glue application to the workpiece: Leak-proof glue tank with glue supply from below and fast heat-up time after machine shutdown - Flush trimming unit: - for the front and rear edges of the workpiece - Automatic sensing of the workpiece - Pneumatic trimming with a blade for cut-ready edges - Flush milling unit - With vertical sensing and horizontal guidance - Reproducible adjustment via digital counters - 2 powerful 0.4 kW high-frequency motors - Continuously adjustable from 4,000 to 18,000 rpm - Milling cutter: 70 mm, Z4, radius 2 mm/15° - Central exhaust port: 100 mm - 2 chip extraction hoods with 60 mm hose - Automatic height adjustment of the upper router bit via the belt feed - Continuous workpiece support, approx. 1,800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable film plate: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10–100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4–2.0 mm - Roller cutting: max. 1.0 × 55 mm, 2 × 45 mm - Glue pot heating power: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400 V, 50 Hz, 3-phase N - Total power consumption: 3.8 kW - Pneumatic connection: 6 bar Dimensions (without film tray): approx. 1800 x 700 x 1300 mm Dsdezk Nmropfx Aizecp Weight: approx. 260 kg

Condition: used, Year of construction: 1998, Used Machine Year of manufacture: 1998 Features and Technical Specifications: With a length of 5,500 mm, the Quadromat is the shortest edge-processing machine that, with its integrated workpiece return system, . Dcedpfxszk Nr Us Aizjp Not only are the longitudinal edges milled inside the machine, but the end edges are also profiled, thereby completing the machining process. The finished workpiece is returned to the operator, eliminating the need for manual rework. With PLC control and up to 20 machining programs Workpiece dimensions: - Minimum width: 60–80 mm (depending on the edge banding material) - Minimum length: 150 mm - Workpiece thickness: 10–50 mm - Edge banding thickness: 0.4–12 mm - Minimum edge banding length: 400 mm Feed rate: 18 m/min with 2 jointing milling motors with multifunction milling unit (flush, chamfer, radius) with scraper blade with crosscut saw with 2 glue pots (for transparent and white) and 1 spare pot Compressed air connection: 7–10 bar Vacuum connection: 160 mm Weight: approx. 2,400 kg Availability: available shortly Location: Röllbach

Condition: excellent (used), functionality: fully functional, - Manual table adjustment - Manual belt angle adjustment - Belt width: 15 cm - Table width: 45 cm - Table length: 92 cm - Feed speed: 3.7/22 m/min - Motor power: 2.2 kW - 400 V Dodpfjy N N Ntox Aizjcp - Year: 2002

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Smart Touch Numerical Control with Sintra HD Software Panel height mm 10 – 60 Solid mm 22 Pvc/Abs mm 3 Feed speed up to mt/min 25 Working height electronically adjustable by N.C. Motorized and electronically adjustable panel support guide by N.C. Dcodpjwlbxlofx Aizsp Anti-adhesive group Rectifying group with 2 motors electronically adjustable by N.C. Reel holder plate with n° 1 position Gluing group for EVA hot melt glue with glue pot End trimming group with 2 motors with dynamic suction system that follows the blades in each of its movements. Staggered trimming/cornering unit with 2 motors electronically adjustable by C.N Anti-stick unit Rounding unit with 2 multifunction motors (cornering unit + rounding unit) Electronic edge scraping unit electronically adjustable by C.N Glue scraping unit Brush unit “SP-501” Automatic piece return system with Winner 4A bridge unloading

Condition: used, Year of construction: 2007, Workpiece thickness: 8 – 50 mm Edge thickness: 0.4 – 3 mm (max. 3 x 30 / 1.0 x 55) Fixed lengths: max. 3 x 45 mm Feed rate: 11 m/min. Connected load: 10.5 kW Compressed air: 6 bar Weight: approx. 1250 kg Machine length: 3920 mm Storage location: Nattheim Dcodpfxo Agli Ne Aizop

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Ott Atlantic V6 edge banding machine capping, 2 x milling, radius scraper, cleaning disks Edge thickness: 0.2 - 6 mm Workpiece width min.: 70 mm Workpiece height: 8-42 mm Feed speed: 12 m/min. Condition very little used Dsdpfx Aisr Elhvozjcp year of construction 1999 price 5500.-

Condition: used, Year of construction: 2012, Feed speed: 18-25m/min, with FK11 max. 20m/min, working height: approx. 950mm, max. workpiece thickness: 60mm, edge banding material rolls: approx. 0.3-3mm, edge banding material strips: approx. 0.4-6mm, max. roll diameter: 830mm, machine length: approx. 7845mm, operating hours: 25724h, feed operating hours: 3371h, machining time: 412h, control system: HOMAG powerControl PC22. Annual production: between 15000 and 22000 linear meters per year. Equipment: Top/bottom release agent spraying unit, joint trimming unit, glue application unit, 2-roll edge banding magazine, pressure zone, end trimming unit HL81, pre-milling unit BF10, profile trimming unit FK11, profile scraper PN10, finishing unit with glue joint scraper and buffing unit, preparation for HOMAG laserTec, powerControl PC22 with touchscreen, automation packages. In addition, scrapers for both 2mm and 1mm edges are available. Equipment: Extensive range of processing units including joint trimming, glue application unit, 2-roll edge banding magazine, end trimming, pre-milling and profile trimming units, profile and glue joint scrapers, buffing unit and spraying systems. HOMAG powerControl PC22 with touchscreen, automation packages and preparation for laserTec. Scrapers for 1mm and 2mm edges available. Special feature: PUR retrofit in 2023 with GP Service EasyPUR AC-34 and RIEPE spraying system LP289/99 (24V retrofit). The machine is in good, well-maintained condition, fully functional, in operation and has been serviced annually by HOMAG. Documentation available. Inspection possible by arrangement. Dedpfxs Aba Rtj Aizocp

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Sanding belt oscillation Dcodpfx Aisxr Dflszep

Condition: used, Year of construction: 2001, functionality: fully functional, Used, fully functional OTT PACIFIC for sale! Machine length: 6.30 m! Dedpfxoxc Hhke Aizecp

Condition: excellent (used), Year of construction: 1970, functionality: fully functional, MULLER MARTINI PERFECT LINE MACHINE LOT INCLUDES: Dsdpszdyx Sjfx Aizocp PERFECT BINDER ROTORBINDER 10 CLAMPS (with extra stop system) GATHERING MACHINE WITH 12 STATIONS, MODELS 201 AND 2 (manual) TRANSFER SYSTEM TO ROTORBINDER THREE-KNIFE TRIMMER 3670, AUTOMATIC, WITH CASSETTE THE PRICE INCLUDES DISMANTLING AND LOADING ONTO A TRUCK OR CONTAINER.

Condition: good (used), Year of construction: 1999, functionality: fully functional, Volpato LVO 120 edge grinder SN 1929112 Year of manufacture 1999 Manufacturer: LASM Volpato Italy Small single-sided grinding center VOLPATO offers the LVO 120 grinding machine, with combined function that can make life easier for many professionals in the industry. It was developed under the direction of experienced company staff, who work with passion to achieve the best possible result. Vertical oscillating grinder 2.2 kW motor (3 HP) Swivel table 0-90 degrees Work table dim. 880 x 370 mm. Mechanically swiveling Additional support and "round" grinding wheels Belt dimensions 150 x 2580 mm. Dedpfx Aovwdqcsizocp Suction device Weight 250 kg Overall dimensions: 700 x 1000 x 1150 mm. CE marking Technical data may change

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Type: K77 - Year of manufacture: 1995 - Table size: 970 × 180 mm - Operating voltage: 400 V - Power voltage: 230 V - Power: 2.4 kW - Frequency: 50 Hz Dcodpfxey Sap Ae Aizep - Includes: sanding belts: 120 grit, 12 pieces; 80 grit, 4 pieces; 150 grit, 10 pieces Transport possible for an additional charge! The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales, and changes are subject to change. All information without guarantee.

Condition: excellent (used), Year of construction: 1993, Edge sanding machine Dodor Nbktepfx Aizjcp Arminius SP31 In very good condition.

Condition: ready for operation (used), maximum belt width 240mm Dcodpfjzhuv Hox Aizsp mechanical oscillation unit spacing 200-1290mm screw-type belt tensioning star/delta starter manual adjustment of unit spacing cast iron housing dimensions of the side table 920x350mm two 7.5kW motors

Year of construction: 2010, condition: excellent (used), functionality: fully functional, The Trimmer 2A is a CNC corner cleaning machine for PVC window frames, equipped with 2 interpolated axes and an automatic cycle. When properly configured, it is able to check the dimensions of the workpiece. It is fitted with a 275 mm diameter blade, which allows, through different machining programs, the cleaning of the external corner on various profiles. The Trimmer 2A also features upper and lower units with blades for cleaning the bead seams, as well as upper and lower units with knives for cleaning internal corners. Cleaning of both internal and external corners can be completed using the upper and lower drilling/milling units for cleaning the corners or the gasket seats. The processing units can be programmed independently via a CNC PC, which controls the profile programming and the machine’s operation, in either manual or automatic mode. Dcsdpfew Hk T Uex Aizep

Year of construction: 2014, condition: good (used), Edge banding machine, edge bander, finishing unit, buffing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, sanding unit, edge banding unit -Handover: in its current condition as inspected -Accessories: see pictures -Manufacturer: SCM HOLZKRAFT, Edge banding machine type Minimax ME 20 -Minimum workpiece length: 180 mm -Minimum workpiece width: 65 mm -Workpiece thickness: approx. 12 to 50 mm -Edge thickness (rolled edges / strip edges): 0.4 to 2 mm -Feed rate: max. 5 m/min -Adhesive system: Hot melt adhesive granules in the glue pot below -Dimensions: 2000/720/H1235 mm Dsdsz Rxb Rjpfx Aizscp -Weight: 300 kg