Used Edge Trimmer for sale (4,986)

Condition: new, Model Name Hodpjgvqxtjfx Aabonu FALKEN R 1

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 + in stips / lippings (max mm 1) Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 (266) / 3300 Numerical Control / Software ICOS Open (Windows base) Adjustable feeding speed (m/min ) 10 - 50 (Master & Slave) Safety and sound-proof enclosures/cabins SIZING PART (for each side): Anti-chipping Milling Unit 75.186 (1 x Kw 4,4) Hogging Units (2 x Kw 6,6) Max 35 m/min Hodjxggzlspfx Aabenu Milling unit (Joint Trimmer) 75.186 (1 x Kw 4,4) EDGE-BANDING PART (for each side): Glueing Unit (P.U.R. Glue + Quick Melt system) VTG 3-24 + 283.203 Pressure zone + Edge coils supporting unit (No. 24 reels) Snipping (end-cutting) unit 08.42 / 30 / B (2 x Kw 0,66) 30 m/min (0°-25°) Rough/Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° (30 m/min) Multi Function Unit (Profile contour Trimming unit) MFA 08.342 (2 x Kw 0,66) SERVO - 20m/min OPTIONAL: KFA 30 Profile Scraping unit 08.519 Glue scraping unit 08.521 Buffing unit 08.604 (Kw 0,25 x 4) No. 2 Grooving units 08.190 (1 x Left-hand + 1 x Right-hand) (Kw 4,5 x 2) swivelling 90°/180°/270°

Condition: used, 0 0,4 - 5,0 mm Workingpiece thickness from to 10 - 50 mm Total length 4000 mm Feed speed 11 m/min. Bimatic edge bander Type Prima 7.5 Two ----- Manufacturer's description: Technical data: Edge thickness: 0.4 - 5mm min. Panel width (without rounding unit): 80 mm min. Panel width (with rounding unit): 130 mm min. Panel length (without rounding unit): 100 mm min. Panel length (with rounding unit): 300 mm min. panel thickness: 10 mm max. panel thickness: 50 mm Feed speed: 11 m/min Suction nozzle: 3 x 150 mm Connection: 9 kW - 400 V / compressed air: 6 bar Aggregates: Jointing unit incl. AIGNER diamond jointing cutterheads, with DIA- interchangeable knife system Konstantin and controlled edge blow-out nozzle behind the 2nd jointing knife head. Joining cutterhead. Cross-cut saw unit with suction device incl. 2 pneumatically swivelling saw blades saw blades, adjustable and programmable from the control panel. MULTI radius trimming unit with 4 servomotors, adjustable and programmable from the control panel. programmable from the control panel. Including DIAMANT cutter with radius 1mm and radius 2mm. Rounding unit (copy trimming unit) with insert shelf function and pneumatic 2-position turret, adjustable and programmable from the control panel. The The complete unit can be pneumatically inserted and removed from the control panel. Including 1 quick-change motor with R=1mm and 1 quick-change motor with R=2mm MULTI radius scraper unit radius 1mm and radius 2mm with pneumatic 4-position turret. position turret. The unit can also be inserted and removed pneumatically Including suction device with chip collection box for scraper chips. Flat scraper unit with 4-fold usable scraper knives. The complete The complete unit can be inserted and removed pneumatically. Remaining glue is are sucked off. Hodpfx Aaewgwl Debjnu Buffing unit with 2 diagonally arranged ORIGINAL Riepe cloth-sisal wheels for cleaning and buffing. lamellar wheels for cleaning and polishing General equipment: - 90° insertion aid - Telescopic extension with double support - Motorised adjustable infeed ruler (joint thickness adjustment) from the control panel adjustable and programmable - Motorised adjustable top pressure bar adjustable and programmable from the control panel programmable - Motorised adjustable pressure zone adjustable and programmable from the control panel programmable - 5 mm version: Quick-change motors with insert-flush milling cutter interchangeable with milling motors with radius milling cutter - High-gloss package: Roller scanning for radius milling unit, radius scraper unit and flat scraper unit scraper unit and flat scraper unit - Large viewing, noise and protection cabin for all units and for the glue pot - Interior lighting - Control panel with 15'' touchscreen and self-explanatory operator guidance - USB port for data backup and data transfer - Network connection for online support - Controlled pneumatic cylinder for workpiece distance control - Teflon-coated glue tray with quick-change system and energy-saving mode in standby mode in standby - Glue roller with screw conveyor for long and high workpieces (especially for PUR glue) - Additional quick-change glue tray - Pressure zone with 3 pressure rollers, whereby the 1st pressure roller is motorised is motorised - Heavy roller snipping shears for edges 54 x 3 mm - Original RIE...

Condition: new, - new -- The edge sanding machine type SK-1 is perfect for sandinglarge, curved and straight workpiece edges.- The main application area of the SK 1 is the sanding of radii andshaped parts.- The sanding unit with its radii of 80 mm, 300 mm and1000 mm also has a straight sanding surface available.- The pneumatic, infinitely height-adjustable oscillation andthe heavy cast iron sanding unit ensure completesanding belt utilization and precise sanding results.- The generously designed revolving work table with itsintegrated extraction system enables the user to work easily andergonomically.- The SK-1 is equipped with pneumatic unit oscillationand pneumatic belt tensioningTechnical data:Motor power: 4 kWBelt speed: 15 m/illation stroke: 30-150 mmBelt length: 2700 mmBelt width: 150 mmTable size: 2000 × 1000 mmSpace requirement: 3000 × 1500 mmSuction: 1 x 140 mmWeight: approx. 560 kgArt. 1020-200000 Hnjdpovyupusfx Aabeu

Condition: used, Year of construction: 2009, Condition: Very good | *Machine description:* I am offering an industrial, single-sided edge banding machine from the renowned brand Homag, model Optimat KAL 210/6/A3/S2, year of manufacture 2009. The machine is fully operational, regularly serviced, and ready for immediate operation. *Technical parameters and equipment:* Year of manufacture: 2009 Model: KAL 210/6/A3/S2 Type: Single-sided edge banding machine for furniture panels Edging thickness: up to 3 mm Panel thickness: adjustable from 10 mm *Units:* Hsdpfsxlpa Ijx Aabsnu - End trimming - Milling - Corner rounding - Scraping - Buffing/Polishing Control: Electronic / automatic Technical condition: Very good – all functions operate correctly *Additional information:* - Machine in continuous operation - Regularly serviced - Ready for immediate use Inspection possible on site by prior arrangement. Location: Jasin / Wielkopolskie region

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 020313L, pressure: 7 bar, Description: Solid steel construction for high machine stability. Workpiece feed via sliding transport chain with plastic plates. Upper pressure fitted with two rows of rubber-coated rollers. Manual adjustment of upper pressure with automatic positioning of the units according to the changed workpiece thickness. Mechanical digital display of panel thickness. PLC for on/off control of the motor and glue pot. Glue pot with standby function for temperature control. Start/stop function for all motors. End trimming unit for 3 mm edging rolls. Support tray for edging rolls with up to 800 mm diameter. Central dust extraction. Roller rail as workpiece support along the entire machine. Safety cover over all processing units. Control panel, including emergency stop and lockable main switch. Transformer for 24V auxiliary circuit. Jointing milling unit before the gluing section, for preparing the workpiece edge for adhesive application. With adjustable infeed fence. Maximum material removal 2 mm. 2 motors at 1.1 kW each, 12,000 rpm, max. material removal 2 mm, extraction port Ø 120 mm, incl. 2 WIDIA cutting tools. Gluing section for hot-melt adhesive with fast heating and adhesive application roller. System for temperature control and recycling of excess hot-melt adhesive. Power requirement 3.5 kW, capacity 1.5 kg, heating time approx. 15 min., depending on ambient temperature and adhesive. End trimming unit With 1 saw blade for trimming front and rear edge overhangs at a 90° angle, flush to the workpiece. Trimming for the front and rear overhangs can be controlled individually as needed. Motor: 0.35 kW. Saw blade speed: 12,000 rpm. Flush milling unit With 2 motors for milling a radius or chamfer on the top, bottom, and/or front edge. Vertical and horizontal motor adjustment on hardened steel guide rails and ball bearings. Three manually adjustable positions for different edge thicknesses. Motor not tiltable. Unit complete with WIDIA cutting tools 2/3 mm. 2 motors, 0.55 kW each, 12,000 rpm. Diamond cutting tools, 68mm Z6, R=2. Profile scraper knife Flat scraper knife Buffing unit Technical data: Edging strip thickness (manual feed) max: 5x45 mm Pre-milled panel thickness: 10 - 40 mm Unmilled panel thickness: 10 - 60 mm Max. height melamine edging: 65 mm Max. height ABS edging: thickness 0.4-2 mm = 65 mm; thickness 2-3 mm = 40 mm Max. edge overhang top/bottom: 2 mm each Minimum workpiece width with roll material: 90 mm Minimum workpiece length with roll material: 160 mm Hsdpfx Aajxn Hzbsbsnu Adhesive temperature: 190°-210° Feed speed: 8 m/min Inverter: 200 Hz Compressed air: 7 bar Extraction nozzle Ø: 2x 60 mm CE standard

Condition: excellent (used), Year of construction: 2015, total length: 3,653 mm, Single-sided edge banding machine Manufacturer: Brandt Model: Ambition 1210 F, Optimat KDF 210 Year of manufacture: 2015 Feed speed: 11 m/min Workpiece thickness: 8 – 50 mm Minimum workpiece width: 70 mm Edge material (roll): 0.4 – 3 mm Edge material (strip): 0.4 – 3 mm Workpiece overhang: 38 mm Jointing unit: 2 x 2.2 kW Application unit: A3 End trimming unit, bevel/straight: 2 x 0.18 kW Milling unit: 2 x 0.27 kW (counter-rotating) Profile scraper with quick-change heads Glue joint scraper Hedpjxdxldefx Aabjnu Buffing unit: 2 motors Control system: EASYTOUCH Additional equipment Lubricant spraying unit for edge material

Condition: excellent (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 250 / 1300 Numerical Control / Software ICOS Open (Windows base) Adjustable feeding speed (m/min ) 10 - 50 (Master & Slave) Safety and sound-proof enclosures/cabins SIZING PART (for each side): Hogging Units (2 x Kw 6,6) Max 35 m/min Milling unit (joint Trimmer) 75.186 (1 x Kw 4,4) EDGE-BANDING PART (for each side): Glueing Unit (PUR. Glue + Quick Melt system + EVA Glue) VTG 3-24 + 283.201 + 283.19 + 283.203 Pressure zone Edge coils supporting unit (No. 24 reels) Rough/Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° (30 m/min) Rough/Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° (30 m/min) Profile Scraping unit 08.515 Glue scraping unit 08.521 Buffing unit 08.617-2 (2 x Kw 0,18) Hnedpfexggthox Aabsu No. 3 Grooving units 08.190 (2 x Left-hand + 1 x Right-hand) (Kw 4,5 x 3) swivelling 90°/180°/270°

Condition: used, Oscillation ja_yes ja / nein 0 ja_yes ja/nein 0 ja_yes ja/nein tiltable up to ja_yes Motor output 2,2 kW Table dimensions 1000 x 350 mm sanding width 200 mm Weight 300 kg Langzauner LZK 3/2, BB 200 Edge Sander ----- Technical manufacturer's specifications: Table width: 345 mm Table length: 1000 mm Maximum sanding belt width: 200 mm Sanding belt length: 2600 mm Main motor: 3 kW Circular sanding support: Yes Oscillation: Yes Height adjustment: Manual table Swivel sanding belt: Yes Space required length: 1800 mm Space required width: 900 mm ----- Price of the above-mentioned machine upon request! (Technical specifications according to the manufacturer - no guarantee!) All prices quoted are net, plus statutory VAT. Hnedpfx Aewzmuweabsu No original images available yet; image from a brochure for the same model

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with jointing milling unit including DIA - tools Jointing thickness up to 40 mm Workpiece thickness up to 3 mm Combined milling station radius R 2.5 mm Technical description With application of hot glue to the workpiece for edge material up to 3 mm Workpiece thickness 60 mm without jointing unit, 40 mm with jointing unit Maintenance-free, coated glue pot HF - cross-cut station (16,000 rpm) for front and rear edge overhang HF - milling station (16,000 rpm) with interchangeable cutter (combination version) and fine adjustment from the operator side Free slots for additional processing units (system Hebrock), feed approx. 10 m/min Cutting depth adjustment of the cross-cut saw Signal lamp for workpiece sequence, robust chain drive, ergonomically arranged control panel Double-roller top pressure beam Aggregate viewing window from machine rear and operator side PLC control including touchscreen Technical data: - Feed speed 10 m/min - Panel thickness 8 - 40 mm - Weight: depending on equipment approx. 1550 kg - Dimensions (L x W x H) 5250 x 1445 x 1600 mm 2-point pneumatic cutter adjustment 1 unit Switching between radius - flush/bevel for the combined milling stations, switching between bevel or flush is manual by flipping the stop flap in the machine Buffing station (polishing) 1 unit Corner rounding cutter 1 unit incl. combination tool and pneumatic bevel/radius adjustment, max workpiece thickness 40 mm Minimum workpiece length 300 mm Radius R 2.0 mm Radius scraper 1 unit incl. pneumatic lift device, radius R 2.0 mm Hsdpfxoxfh Tms Aabsnu Surface scraper 1 unit with pneumatic engagement control Glue station change system incl. 2nd glue pot and glue outlet downwards 1 unit for quick color change Grooving saw unit horizontal into the edge 1 unit incl. pneumatic lift device and grooving tool Separate extraction of jointing unit 1 unit directly attached to jointing unit vertically upwards d=80mm for optimal suction performance from AKV 3005 DK-F urgently recommended Ball bearing for corner rounding cutter 24.1mm 1 unit Ball bearing for corner rounding cutter 24.2mm 1 unit Interchangeable motor 0.37 kW for corner rounding cutter 1 unit with quick-change device incl. radius cutter R 1 Interchangeable spindles 1 set = 2 pieces 1 unit 1 set of quick-change motors for longitudinal processing top and bottom incl. tool R 1 Compressed air requirement: 100 - 150 l/hour. Storage location: Nattheim

Condition: excellent (used), Year of construction: 2022, 0,4 - 5 mm Hsdpsxfwdbsfx Aabsnu Workingpiece thickness from to 10 - 45 mm Feed speed 8 m/min.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, PROFILATRICE COMAL PRD 12 Automatic edging machine for strip end processing. Used to prepare strip edges for subsequent roll forming. The machine is equipped with a set of rollers capable of performing cold roll forming of strips and sheets, which are continuously shaped until the desired profile or tube is achieved. The machine has seen very little use, is fully operational, and is in good overall condition. Hjdoxdr Swopfx Aabenu Manual and original documentation are available.

Condition: new, Year of construction: 2025, Machine includes: Pre-milling, pre-heating, pre-melting, pressing, fine trimming, end cutting, corner rounding, cutter scraping, flat scraping, buffing Heavy duty machine body and most mechanical machine parts are proceeded by advanced CNC machines for higher stability and longer service life without deforming; Merges numerous functions in one machine, including pre-milling, pre-heating, pre-melt gluing system, snipping, end trimming, fine trimming with servo, corner trimming, scraping with servo, Hjdpfx Aajxd Ubbjbjnu surface scraping and buffing, sprayers, edge banding work can be done in one process. Intelligent PC control, infeed fence, tape pressing rollers, fine trimming and scraping are servo adjust. Corner rounding pneumatic adjust. Machine Speed 16/20/24m/min; Nesting kit design, pre-drilled nesting hole friendly Fine trimming and Corner rounding by HSK25

Condition: used, Year of construction: 2011, Three knife trimmer Wohlenberg Ttim-Tec 45i Year: 2011 Inline three knife trimmer with integrated counter stacker for production lines in lower and medium speed range. Description: - Digital display - Right hand infeed - Automatic hopper feeder for inline production Hnedewpfv Aopfx Aabou - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2 (without waste removal conveyor) Maximum size: 300 x 380 mm Minimum size: 100 x 145 mm Max. mechanical speed: Up to 45 cycles/min. = 2.700/h single copies Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: excellent (used), Year of construction: 2013, Edge banding machine Manufacturer: Brandt Model: KDF 220 Highflex 1220 Year of manufacture: 2013 Edge thickness: 0.4 - 3 mm Workpiece thickness: 8 - 50 mm Overall length: approx. 4,150 mm Feed speed: 10 m/min Total power: 9.5 kW Hodpfx Aaew N Sb Rsbonu Weight: approx. 1,150 kg Jointing unit: Yes End trimming unit: Yes Flush milling unit: Yes Corner rounding unit: Yes Radius scraper: Yes Surface scraper: Yes

Condition: like new (used), Year of construction: 2023, Edgebanding Machine SCM Model: olympic 500 HP 'T-ER2' Offer type: LEASE RETURN, Used machine Availability: Immediately Location: Austria Condition: Like new Year of manufacture: 2023 GENERAL DESCRIPTION: A complete and versatile edgebander for small and medium-sized enterprises, capable of processing a wide range of materials to high quality standards in a compact footprint. The SCM Olympic 500 features electronic adjustment devices and allows for the processing of 2 radii, each with its own tooling, for workpieces with a minimum width of 60 mm. HIGHLIGHTS: • Large touchscreen control panel with “Maestro active edge” software for the human-machine interface (HMI) • Maestro connect: Prepared for later installation without gateway • Dual-radius processing, beveling on all units with multi-blade tooling: - Fine-trimming and radius scraper unit, radius = 1 mm - Fine-trimming and radius scraper unit, radius = 2 mm • Electronically positioned pressure beam OPTIONAL EQUIPMENT: Workpiece spacer at infeed KIT “SAV€NERGY” Cabin and edgebanding area internal lighting “Nesting” tracing roller kit Release agent spray unit “AAR” Edge finishing spray unit Spray unit for sensitive edges Jointing milling unit “RT-V1” Hnodpoq A Tyzofx Aabsu “EASY SIZE” device – electronic quick adjustment for jointing milling unit Glue pot “VC-VM” Ceramic infrared lamp for workpiece preheating Electronic positioning of all pressure rollers End trimming unit “K-2 Radius” Chamfer and radius milling unit “R-HP Multiedge 2R” Corner rounding unit “Round 2-A Multiedge 1R” KIT 'MULTIEDGE 3’ – automatic changeover between straight/radius/radius positions for “Round 2-A Multiedge 1R” unit Radius scraper unit “RAS-HP Multiedge 2R” Flat scraper unit “RC-N” Buffing unit “SP-V” MACHINE LANGUAGE: German TECHNICAL DATA: Edge thickness: 0.4–6 mm Workpiece thickness: 8–60 mm Min. workpiece width: 60 mm Feed speed: 12 m/min Machine length: approx. 4950 mm SPECIAL PRICE FOR LEASE RETURN!!

Condition: good (used), CNC Machining Center HOMAG OPTIMAT BAZ 222/40/K with Edge Banding Unit and Loading Gantry Electronically controlled milling, edge banding, post-processing, and drilling center for the production of furniture parts, solid wood, or similar materials. Two independent Y-axes for the main spindle and edge banding unit Clamping table with 8 clamping consoles Y-1300 mm with hose-free vacuum guidance POWER CONTROL with PC85 controller Software: WoodWOP 5.0 Main spindle: 7.5 kW 12-position carousel tool changer Interface for automatic tool change of machining units with integrated pneumatic/electric/electronic supply and C-axis drive Drill head with 17 spindles Cross-cut saw unit 360-degree edge banding unit / for strip materials: rolls Edge thickness: max. 2 mm with veneer; max. 3 mm with plastic Chip removal conveyor Vacuum pump Busch MM 1322 A, 300/360m3/h (replaced in 2013) Hsdpfoxmvtqjx Aabonu

Condition: good (used), Edgebanding, edge banding, veneer roll -Edge tape: edge banding approx. 62 rolls -Type: various versions, see photos -Shipping/Price: complete Hsdpowk D Rbofx Aabonu -Transport dimensions: 1120/630/H900 mm -Weight: 277 kg

Condition: refurbished (used), Year of construction: 2020, Condition: fully cleaned, refurbished, and overhauled – directly from Hebrock! 🧰 Technical Specifications & Highlights Model: Edge Bander Hebrock K36 Control: PLC with touchscreen Hotmelt glue application: for edge material up to 3 mm Workpiece thickness: up to 60 mm Jointing cutter: with DIA tool, cutting depth up to 3 mm Glue pot: coated, maintenance-free, with quick-change pre-fitting and glue draining system Hnedpfoxmgzlex Aabeu ⚙️ Equipment Packages & Stations HF milling station with pneumatic cutter adjustment Corner rounding unit (radius R = 2 mm) Radius scraper & flat scraper with pneumatic lift-off device Buffing station for perfect surfaces Whispercut jointer head Second milling station incl. pneumatic lift-off and quick-change system Exchangeable motor for corner rounding unit (radius R1) Multi-radius scraper (R1/R2) Multifunctional cutter (R2/R1/chamfer) 🪶 Additional Equipment Release agent and cleaning agent spraying system Protective spraying for edges / nesting function Pneumatic 3-point adjustment LED lighting Airtronic up to 40 mm Hot air unit for optical zero-joint, also for short workpieces and corner rounding up to 60 mm

Condition: excellent (used), FULL LINE of Double-side Sizing-Milling & Edge Banding, composed of the following machines: OZ2050A) Loader (Double-cage, double pick-up) "MEINERT" Mod. P 415 D/B - L with central motorized rollers table. With two external roller ways to in-feed the piles (stacks) of panels to loader. OZ2050B) 1st Double-side Sizing & Edge Bander "IMA" Mod. Combima / II / 440 / A / R3 OZ2050C) Connecting Roller Table "IMA" Mod. IDK L/Q with turning device (from lengthwise to crosswise) with double cone system. OZ2050D) 2nd Double-side Sizing & Edge Bander "IMA" Mod. Combima / II / 590 / B / R3 Hsdpfoxftt Ejx Aabonu OZ2050E) Connecting Roller Table "IMA" Mod. IDK Q/L with Turning device (from crosswise to lengthwise) with double cone system. OZ2050F) Unloader (Double-Cage, double storage) "MEINERT" Mod. P 415 D/S - L With central motorized rollers table. With 2 on-ground motorized roller ways to out-feed the piles (stacks) of panels from the Unloader.

Condition: good (used), Year of construction: 2025, • Additional interchangeable glue pot • PLC control (incl. touchscreen) • Hotmelt application onto the workpiece up to 3 mm jointing cutter • Jointing cutter (incl. DIA tool) up to 2 mm cutting depth • Maintenance-free glue pot with quick-change function, incl. glue discharge device • HF cross-cut saw station (approx. 12,000 rpm) • HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable cutter heads (combination execution) • Corner rounding unit • Surface scraper (incl. pneumatic lift) • Free position (for cleaning station or radius scraper) Hodpfx Aajxgfpzobenu • Robust chain feed • Ball bearing mounted double pressure rollers (top pressure) • Inspection window on rear of machine • Extendable workpiece support • Feed rate approx. 10 m/min • Hebrock F4/09 radius scraper (incl. pneumatic lift) • Hebrock pneumatic 3-point adjustment (for radius, chamfer, or flush milling) Available from: immediately Delivery terms: ex works – EXW Berlin Payment terms: Payment before collection Accessories supplied without guarantee. The following applies: "Item sold as seen." The buyer is responsible for inspecting the completeness of the item on site.

Condition: good (used), Year of construction: 2000, 0,4 - 12 mm mm Workingpiece thickness from to 8 - 55 mm Total length 6.740 mm mm Feed speed 14 / 11 m/min. Hnedpfx Aajxd Dvzjbsu total power requirement 19 kw Weight 2.700 kg

Condition: used, Year of construction: 2020, functionality: fully functional, workpiece height (max.): 45 mm, edge thickness (max.): 3 mm, type of input current: three-phase, Further technical data: Ball-bearing turntable for edge banding rolls, Ø 740 mm Edge thickness: 0.4 – 3 mm Workpiece height: 8 – 45 mm Extendable workpiece support up to 450 mm Hsdpfx Ajxdb U Uoabenu Manually adjustable workpiece height m-motion and x-motion PLUS control systems (highest setting repeat accuracy, programmable) Robust processing units in new design, solid machine base, precise extraction system Additional equipment: Surface scraper Spraying unit for cleaning agent LED lighting package Tempora 45.03 Spraying unit for release agent Cross-cut saw unit with 45° travel path and radius processing Pneumatic-mechanical infeed lock 75 x-motion PLUS package Tempora 45.03

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, total length: 3,600 mm, total width: 1,100 mm, edge thickness (max.): 60 mm, overall weight: 1,000 kg, input voltage: 400 V, input frequency: 50 Hz, incl. joining unit up to max. 2mm chip removal, edge thickness 0.4-5mm, workpiece height 8-60mm, 11m/min feed speed, min. workpiece dimensions L=140mm W=70mm, automatic feeding of roll materials, individual feeding of strip materials, impact shears for rigid PVC/ABS up to 3mm thick, Teflon-coated glue tray with 2kg, glue application with glue roller 3x 400 V motor voltage, 50 Hz motor frequency, max. connected load 7.0 kW Joining unit with 2 slide milling cutters up to max. 2 mm chip removal Min. workpiece width: *The minimum workpiece width varies depending on workpiece length, height and surface finish: 70 mm Endless edge feed via support plate, Ø 720 mm, for PVC/ABS Automatic edge feed for edging materials 0.4-5 mm thick Impact shears for continuous edging material up to 3 mm thick in rigid PVC/ABS Glue unit Teflon-coated, 2 kg for hot-melt adhesive granulate Mechanically pre-tensioned pressure unit, 1 straight pressure roller and 2 holding pressure rollers; adjustment via dial gauge Cross-cut saw unit with HF motor, pneu. Adjustment of 0°/20° bevel cross-cuts Multifunction trimming unit, 12,000 rpm, 2x 0.55 kW, pneumatic selection for radius, flush and chamfer trimming for thin edges Radius scraper unit, mechanically switchable for R=2 mm Surface scraper unit, can be switched on mechanically Hnjdpfxjvfnqpe Aabsu Polishing unit, 2 motors, Spraying device for cleaning agent in front of polishing unit Pivoting control panel with 5.7" color touch screen Color touch screen Workpiece transport via chain conveyor Pull-out workpiece support Further technical data: Workpiece length: min. 140 mm Suction connection: 2 x 80 / 1 x 120 mm Edge thickness: 0.4 - 5.0 mm Feed speed: 11 m/min Workpiece width: 70 mm Workpiece thickness: 8 - 60 mm

Condition: used, Year of construction: 2021, workpiece height (max.): 45 mm, edge thickness (max.): 3 mm, Additional equipment: Surface pull blade Application of cleaning agent LED lighting equipment Tempora 45.03 Application of release agent Jointing cutter with interchangeable knives, 49 mm height Cross-cut saw unit with 45° traverse path Pneumatic-mechanical infeed stop Exchangeable glue pot instead of standard application unit x-motion PLUS package tempora 45.03 Further information: Ball bearing rotary table for roll edge material Diameter of rotary table: 740 mm Extendable workpiece support, extendable up to 450 mm Hsdexdctxepfx Aabonu Manually adjustable workpiece height: 8–45 mm