Used Electrospindle for sale (203)

Condition: ready for operation (used), IMA Omlat electrospindle 7.5kW 305/308V~ with constant power from 12,000 to 24,000 rpm, Art./Material No.: 140084, Drawing 06058, used, good condition, 100% functional, scope of delivery as per photos. Rodpfx Amjzahxaonew

Condition: excellent (used), functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, TECHNICAL SPECIFICATIONS: Working area (x,y,z): 2900 x 1130 x 110 mm No. 6 work bars with vacuum cups, each with 3 cups BECKER vacuum pump, 90 m3 capacity Separate electrical cabinet + control console Software: BIESSEWORKS Safety mats DRILLING UNIT BH 17L No. of vertical drilling spindles: 10 No. of horizontal drilling spindles: 2 + 2 on the X-axis 1 + 1 on the Y-axis No. 1 blade unit for grooves on the X-axis CLAMPING UNIT: Rodpfx Amszfi H Ujnow 7 kW electrospindle - ISO30 10-position tool changer

Condition: used, machine/vehicle number: 008016, X axis working area: 3300 mm Y axis working area: 1550 mm Rjdpow Idhmofx Amnsw Working Table: Pod and Rail Main Electrospindle power: 10 KW Number of controlled axes: 5 axes Total number of drilling spindles: 35 Total number of tool changer positions: 14

Condition: used, Year of construction: 2011, AXES Working Range X-Y-Z Axes * mm 3050-1300-180 Workpiece length for pendulum operation mm 1390 Stroke X-Y-Z Axes mm 3460-1735-250 Max. traverse speed of X-Y axes m/min 60 WORK TABLE Number of workpiece supports and vacuum cups 6 / 2 standard type Standard end stops / position 1 / rear Vacuum pump m3/h 90/108 DRILLING UNIT Vertical spindles std/quantity/speed 1/min 12 (8X-5Y) / 4000 Horizontal spindles std/quantity/speed 1/min 6 (4X-2Y) / 4000 Integrated grooving / saw unit in X Ømm/1/min 120 / 6000 Motor power kW (HP) 2.2(3) ELECTROSPINDLE Motor power std./opt. (S6) kW (HP) 7.5(10) / 11(15) Max. speed 1/min 24000 Tool changer traveling with unit carrier in X 4 places, pneumatic INSTALLATION Installed power KVA 23÷28.5 Compressed air requirement Nl/min 450 Extraction air requirement m3/h 1900+1900 (3400) Required extraction air velocity m/sec 30 Extraction connection diameter mm 150+150 (200) Machine weight Kg 3000 * X: distance between stops; Y: milling center as reference point; Z: workpiece passage GENERAL FEATURES CNC-controlled drilling and milling center, C-frame design, and worktable with adjustable workpiece supports and vacuum suction cups, for: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Groove milling with disc cutter in the “X” direction - General milling work Self-supporting structure and work table Structure made from welded steel construction with control cabinet integrated into the machine frame. Available in two different lengths and with standard workpiece supports or TV carrier options. Box construction made from cold-rolled steel with internal stiffening ribs and protective devices comprising a drilling head with vertical spindles, horizontal spindles, an integrated grooving and saw unit, and an SCM electrospindle with HSK 63 F quick-change tool system. Movement paths of the portal and unit carrier Movement in the X, Y, and Z axes is via linear prismatic guideways with preloaded ball bearings. The X-axis movement (moving gantry) uses a preloaded, backlash-free rack-and-pinion drive with helical gearing. Movement of the unit carrier in Y and Z directions is also preloaded for precision. Positioning of the working units and machine function control is through "brushless" AC servo motors and digital drives. CNC CONTROL The control unit comprises a numerical control for the milling and drilling machines and a PC with a graphical user interface "XILOG PLUS". PC office operating system Windows XP - 17" LCD color screen - QWERTY keyboard - Swiveling control panel - Machine interface: Xilog Plus software Xilog Plus Features Programming - Parametric, graphical, and ISO programming Rodjyymz Uepfx Amnjw - Import of DXF and ASCII files - Linear or circular interpolation on three axes, spatially linear, spirally on selected plane - Supported programming with graphical and syntax assistance for drilling and milling operations - Automatic optimization of drilling operations and tool change cycles - Possibility to shift panel zero point for drilling on slanted or curved panel sides - Full compatibility with CAD/CAM Routocam (SCM) – AlphaCam Integrated additional functions - Calculator for direct transfer of computed data - S

Year of construction: 2002, condition: ready for operation (used), travel distance X-axis: 2,800 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 18,000 rpm, tool weight: 10,000 g, number of axes: 4, This 4-axis FPT DINO CNC Gantry Milling Machine was manufactured in 2002. It features an impressive X-axis travel of 2,800 mm, Y-axis travel of 1,600 mm, and Z-axis travel of 800 mm. The machine is equipped with an electrospindle capable of speeds up to 18,000 RPM and a robust gantry type cast-iron construction. If you are looking to get high-quality milling capabilities, consider the FPT DINO machine we have for sale. Contact us for further details. • Rapid feed rate: 35,000 mm/min • Total installed power: 68.7 kW / 93.4 HP • Power supply: 400 V, 50 Hz, 116.1 A • Machine structure: Gantry type cast-iron construction • Spindle: Electrospindle, 5,000 / 10,000 / 15,000 rpm • Spindle speed: 18,000 rpm • Spindle taper: HSK63 • Tool magazine capacity: 40 positions • Max tool diameter: 70 mm • Max tool length: 300 mm Rjdpjzbic Asfx Amnsw

Condition: used, TECHNICAL DETAILS - Number of axes : 27 - Number of posts : 12 - Number of machining stations : 9 - Indexing time : 2 [sec] MACHINING UNIT - Designation : UV151-3 - Number of units : 1 - Travels on X/Y/Z axes : 110 / 150 / 135 [mm] - Rapid traverse rate : 6500 [mm/min] - Resolution : 0.001 [mm] MACHINING UNIT - Designation : UV50-3 - Number of units : 8 - Travels on X/Y/Z axes : 40 / 120 / 100 [mm] - Rapid traverse rate : 6500 [mm/min] - Resolution : 0.001 [mm] SPINDLES - Spindle type : Electrospindle Ø38 * Number of spindles : 14 * Tool holder type : ISO10 * Spindle speeds : 18.000 [rpm] * Spindle power : 0.25 [kW] - Spindle type : Electrospindle Ø38 * Number of spindles : 4 * Tool holder type : ISO10 * Spindle speeds : 9.000 [rpm] * Spindle power : 0.25 [kW] - Spindle type : Electrospindle Ø120 * Number of spindles : 1 * Tool holder type : HSK40 Rjdpjv Rgy Hjfx Amnjw * Spindle speeds : 8.710 [rpm] * Spindle power : 3.8 [kW] - Spindle type : Electrospindle with gear reducer Ø38 * Number of spindles : 2 * Tool holder type : ISO10 * Spindle speeds : 9.000 [rpm] * Spindle power : 0.25 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 10 [kW] WEIGHT & DIMENSIONS - Machine floor space : 4600 x 3600 [mm] - Machine height : 3200 [mm] - Machine weight : 13500 [kg] EQUIPMENT - CNC : Siemens - Cooling unit - Coolant tank * with high-pressure pump - Chips conveyor - Oil mist extractor : ELBARON RON/A 120

Condition: used, TECHNICAL DETAILS - Number of axes : 27 - Number of posts : 12 Rjdpjv Rgyyofx Amnjw - Number of machining stations : 9 - Indexing time : 2 [sec] MACHINING UNIT - Designation : UV151-3 - Number of units : 1 - Travels on X/Y/Z axes : 110 / 150 / 135 [mm] - Rapid traverse rate : 6500 [mm/min] - Resolution : 0.001 [mm] MACHINING UNIT - Designation : UV50-3 - Number of units : 8 - Travels on X/Y/Z axes : 40 / 120 / 100 [mm] - Rapid traverse rate : 6500 [mm/min] - Resolution : 0.001 [mm] SPINDLES - Spindle type : Electrospindle Ø38 * Number of spindles : 14 * Tool holder type : ISO10 * Spindle speeds : 18.000 [rpm] * Spindle power : 0.25 [kW] - Spindle type : Electrospindle Ø38 * Number of spindles : 4 * Tool holder type : ISO10 * Spindle speeds : 9.000 [rpm] * Spindle power : 0.25 [kW] - Spindle type : Electrospindle Ø120 * Number of spindles : 1 * Tool holder type : HSK40 * Spindle speeds : 8.710 [rpm] * Spindle power : 3.8 [kW] - Spindle type : Electrospindle with gear reducer Ø38 * Number of spindles : 2 * Tool holder type : ISO10 * Spindle speeds : 9.000 [rpm] * Spindle power : 0.25 [kW] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 10 [kW] WEIGHT & DIMENSIONS - Machine floor space : 4600 x 3600 [mm] - Machine height : 3200 [mm] - Machine weight : 13500 [kg] EQUIPMENT - CNC : Siemens - Cooling unit - Coolant tank * with high-pressure pump - Chips conveyor - Oil mist extractor : ELBARON RON/A 120

Condition: used, TECHNICAL DETAILS - Number of axes : 11 Rjdpfx Aezgx Ahemnjw - Number of spindles : 2 MAIN SPINDLE - Spindle power : 47 [kW] - Spindle speeds : 3500 [rpm] - Max. bar diameter : 102 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle power : 47 [kW] - Spindle speeds : 3500 [rpm] - Max. bar diameter : 102 [mm] - C axis indexing precision : 0.001 [°] - Travel : 610 [mm] TURNING-MILLING SPINDLE - X stroke : 580 [mm] - Y stroke : ± 140 [mm] - B Axis stroke : 270 [°] - B axis indexing precision : 0.001 [°] - Tool type : HSK-T63 - Spindle speeds : 9000 [rpm] - Spindle power : 24.5 [kW] - Fixed tools on a milling electrospindle : 6 x VDI30 LOWER TURNING-MILLING SPINDLE - Y stroke : ± 140 [mm] - B Axis stroke : 270 [°] - B axis indexing precision : 0.001 [°] - Tool type : HSK-T63 - Spindle speeds : 9000 [rpm] - Spindle power : 24.5 [kW] - Fixed tools on a milling electrospindle : 6 x VDI30 TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 140 - Tool exchange time : 6 [sec] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 114 [kW] WEIGHT & DIMENSIONS - Machine floor space : 4800x2960 [mm] - Machine height : 3170 [mm] - Machine weight : 18500 [kg] MACHINE HOURS - Number of hours under power : 57184 [h] - Spindle hours : 1756 [h] - Number of turning-milling spindle hours : 1694 [h] EQUIPMENT - CNC : Siemens Sinumerik 840D SL - Coolant tank * with high-pressure pump * with paper filtering unit * Coolant through spindle - Chips conveyor - Spindle cooling unit - Workpiece probe : Renishaw

Condition: used, TECHNICAL DETAILS - Number of axes : 10 - Number of spindles : 2 MAIN SPINDLE - Spindle power : 24 [kW] - Spindle speeds : 5000 [rpm] - Max. bar diameter : 65 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle power : 24 [kW] - Spindle speeds : 5000 [rpm] - Max. bar diameter : 65 [mm] - C axis indexing precision : 0.001 [°] - Travel : 390 / 600 [mm] TURNING-MILLING SPINDLE - X stroke : 350 [mm] - Y stroke : ± 80 [mm] - B Axis stroke : 270 [°] - B axis indexing precision : 0.001 [°] - Tool type : HSK-T40 - Spindle speeds : 18000 [rpm] - Spindle power : 11 [kW] - Fixed tools on milling electrospindle : 6 x VDI25 LOWER TURNING-MILLING SPINDLE - Y stroke : ± 80 [mm] - B Axis stroke : 270 [°] - B axis indexing precision : 0.001 [°] - Tool type : HSK-T40 - Spindle speeds : 18000 [rpm] - Spindle power : 11 [kW] Rsdpfev Ig Avjx Amnjw - Fixed tools on milling electrospindle : 6 x VDI25 TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 80 - Tool exchange time : 4.5 [sec] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 68 [kW] WEIGHT & DIMENSIONS - Machine height : 2500 [mm] - Machine weight : 11000 [kg] MACHINE HOURS - Spindle hours : 19781 [h] - Number of turning-milling spindle hours : 9713 [h] EQUIPMENT - CNC : Siemens Sinumerik 840D SL - Coolant tank * with high-pressure pump * with paper filtering unit * Coolant through spindle - Chips conveyor - Spindle cooling unit - Parts catcher

Condition: used, machine/vehicle number: 008338, X axis working area: 4500 mm Y axis working area: 1600 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 5 axes Total number of drilling spindles: 41 Total number of tool changer positions: 37 Rodsx A Tkxjpfx Amnjw

Condition: used, machine/vehicle number: 008389, X axis working area: 8417 mm Y axis working area: 1930 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 40 Total number of tool changer positions: 22 Redeyqxxropfx Amnsw

Condition: as good as new (ex-display), Year of construction: 2026, CNC Machining Centers Rover Multi Up M C S Working Area*: X = 3280 mm; Y = from 1580 to 1660 mm, depending on work conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 29 mm Workpiece Clearance*: Y = 1900 mm Axis Travel*: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Subdivision of the vacuum system into 2 working zones and 2 clamping zones in X. AUXILIARY VACUUM SYSTEM – 2 zones Allows clamping of workpieces using vacuum templates. Remote Control RM850 Rover Multi Up M C S Panel – Multi Purpose Regular Configuration 2 Compatible with the turret tool magazine with 16 positions and the side tool magazine with 12 positions. The tool magazines can also be retrofitted. Uninterruptible Power Supply (UPS) for machine PC. 6 ATS workpiece supports – 18 module carriers — 6 aluminium workpiece supports. The positioning of the workpiece supports is via linear guides with ball bearing slider blocks. Clamping is performed on the front and rear linear guides via pneumatic cylinders. Clamping is released by a push button located at the front of the workpiece support. — 18 module carriers, 132 x 132 x H 41.5 mm, with independent pneumatic clamping. The vacuum modules can be rotated in 15° increments on the module carriers; an ideal solution for shaped parts. — 18 covers for module carriers without template. SA (Set-Up Assistant) working table for tables up to 1550 mm. Supported manual positioning system with motion direction indicator and position indicator. — Sensors on each working table and along the X-axis of the working area. — Display of direction and position achieved for the carriage during positioning phase, mounted on each working table. According to the programmed configuration of the working tables, the system indicates the direction of movement for each working table and carriage, and confirms with a green LED and audible signal when the correct position is reached, with a tolerance of +/- 1.5 mm. Subdivision of the pneumatic system into 2 working areas in X. Machining unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled – 20,000 rpm Extraction hood with 12 NC-controlled positions for the 5-axis electrospindle. Flange for preparation of a 5-axis interpolating machining unit for mounting aggregates. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Rodpfx Aoy Ehrxsmnjw Drilling head BH 24 L Side tool magazine with 12 positions, integrated into the machine bed. Turret tool magazine with 16 positions, installed directly on the X machining unit. HSK F63 tool adapter, equipped with a long integrated flange, for saw blades on the 5-axis head. Saw blade 300 mm, for tool holder. Hi-Tech tool set Complete set of tools for the acceptance test Consisting of the following 9 parts Replacement of standard PC with a high-performance PC. Digital device for measuring tool length up to 130 mm diameter. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1. License WorkCenter suction cup proposal 5-Axis Simultaneous Material removal simulation 12-month warranty period Location: ex stock 54634 Bitburg - immediately available -

Condition: used, machine/vehicle number: 008166, X axis working area: 4250 mm Rodsyy U S Iopfx Amnjw Y axis working area: 1250 mm Working Table: Pod and Rail Main Electrospindle power: 9 KW Number of controlled axes: 4 axes Total number of drilling spindles: 25 Total number of tool changer positions: 14

Condition: ready for operation (used), Year of construction: 2018, number of axes: 3, spindle motor power: 5,000 W, spindle speed (max.): 24,000 rpm, This 3-axis VITAP Point K2 TOP 2.0 was manufactured in 2018. It features continuous machining with a maximum workpiece weight of 80 kg and dimensions of Y 1200 mm and Z 50 mm. The machine includes an automatic 4-station tool changer and a dual “0” reference laser for precise positioning. If you are looking to get high-quality CNC processing capabilities, consider the VITAP Point K2 TOP 2.0 machine we have for sale. Contact us for further details. • Condition: not rebuilt, without warranty • CE compliantMachining and axes • Continuous machining, machining from below, automatic return of workpiece to operator • 3 controlled axes: • X-axis: uninterrupted workpiece transport via DDT (Dual Dynamic Transport System) with brushless motor • Y-axis: drilling head travel • Z-axis: drilling • No workpiece length limitation • Rear workpiece exitReferencing and positioning • Dual “0” reference laser (transmitter/receiver) for start/end detection; compensates for dark-edged materials • Program readjustment for drilling from below for flushness on vertical/horizontal workpieces • Side stops with rollers (fixed and movable), mechanical digital readout, automatic alignment to 0-stop, removal up to 3 mm on the 0-line • Constant side clamping device for precise positioning on the 0-line • Adjustable zero point for 4-sided formattingTooling and heads • Automatic 4-station tool changer • 12 independent vertical spindles • Horizontal spindles: • X-axis: (2+2) • Y-axis: (2+2) • 1 saw (Ø 100 mm) • 5 kW electrospindle, ISO 30 taper, 12,000–24,000 rpm Redpfx Amsy Hrdzsnjw • Spindle speed (additional spec): 3500 rpm • Max vertical tool diameter: 35 mm • Max horizontal tool diameter: 12 mm • Max vertical drilling depth: 45 mm • Max horizontal drilling depth (X/Y): 30 mmCapacities • Max workpiece weight: 80 kg • Max workpiece size: X unlimited, Y 1200 mm, Z 50 mm • Min workpiece size: X 270 mm, Y 185 mm (70°), Z 4 mm • Feed rate: 25 m/minControl and software on machine • 19" 5/4 TFT LCD monitor • Industrial PC • WSC operator interface with Lister, parametric tooling, and parametric setup • CAD TPA EDI32 graphical programming, basic version • USB port • Saving of all files • Macro programming • Import of DXF filesUtilities and extraction interface • Dust extraction air volume: 2000 m³/h • Exhaust speed: 30 m/s • Exhaust ports: 2x Ø 100 mm + 1x Ø 50 mm • Motor: 1.7 kW • Compressed air: 7 bar • Max air consumption: 60 Nl/min • CE STANDARDS Additional equipment • Office software – License

Condition: excellent (used), Year of construction: 2011, operating hours: 9,000 h, functionality: fully functional, machine/vehicle number: 5921, type of input current: three-phase, input voltage: 2,800 V, pressure: 6 bar, input current: 41 A, feed length X-axis: 4,300 mm, feed length Y-axis: 2,300 mm, feed length Z-axis: 1,200 mm, total height: 4,310 mm, total length: 7,310 mm, total width: 7,130 mm, input frequency: 50 Hz, We offer this excellent 5-axis CNC machining center, the CMS SINTESY 4323 MPT, designed for trimming plastic and laminate parts, manufactured in 2011. Manufacturer: CMS S.p.A. Model: SINTESY 4323 MPT Rsdpfxezcpkco Amnew Year of manufacture: 2011 5 interpolated axes Linear axes: X-4300, Y-2300, Z-1200 Rotary axes: B +/- 120 deg, C +/- 240 deg Electrospindle: 7.5 kW Installed power: 28 kW Compressed air consumption: 400 nl/min Tool magazine: 12 positions Extendable tables Dustproof cabin – enclosed machine design. If you have any questions or require further information, please do not hesitate to send us a message or contact us by phone.

Year of construction: 2006, operating hours: 7,000 h, condition: excellent (used), functionality: fully functional, X-axis travel (longitudinal axis) mm 7280 Y-axis travel (transverse axis) mm 525 Z-axis travel (vertical axis) mm 380 A-axis rotation (spindle rotation) mm from 0° to 180° continuous Rjdpsyi Umpofx Amnsw Maximum positioning speed X-axis m/min 80 Maximum positioning speed Y-axis m/min 60 Maximum positioning speed Z-axis m/min 30 Maximum A-axis positioning speed From 0° to 90° in 1" Electrospindle power kW 7 Electrospindle speed rpm variable up to 20,000 Tool holder taper HSK-40E Tool magazine capacity qty. 8 Number of clamps qty. 8 Automatic clamp positioning Installed power kW 16 Residual-current circuit breaker on main line A 0.3 Weight t 4.8 Operating pressure bar 6 ÷ 8

Condition: used, Year of construction: 2014, No. 01 Homag Weeke machining center Mod. BMG 111/45/12/K Usable working area with electrospindle 4500 x 1550 mm Usable working area with all units 4500 x 1250 mm Boring head with 12 vertical spindles and 4 + 2 horizontal spindles, saw unit 0/90 Electrospindle 9 kW 12 Hp HSK, rotation speed from 1250 to 24000 rpm 4th axis for aggregate rotation 8-position circular tool changer 8-position lateral tool changer Lateral pick-up tool changer Special FLEX 5 HIGH PERFORMANCE unit for drilling, milling, cutting Automatic tilt adjustment 0 – 100 degrees Chip conveyor discharge to the right 8 Schmalz work tables, 16 suction cups Suction cup positioning laser 2 vacuum pumps Rjdpfoyarwtox Amnsw POWERTOUCH control system Woodwop dxf import Teleservicenet assistance CE compliant Year 2014

Condition: good (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 7,000 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 350 mm, rotational speed (max.): 18,000 rpm, Emmegi Phantomatic T5 – CNC Profile Machining Centre (2007) For sale: a well-maintained and fully operational Emmegi Phantomatic T5 CNC profile machining centre. This machine is ideal for the efficient and precise processing of aluminium, PVC, and light-alloy profiles. The long X-axis travel allows machining of profiles up to 7 meters in a single setup, while the pendulum mode delivers outstanding productivity for series production. Technical Specifications Manufacturer: Emmegi Model: Phantomatic T5 Year of Manufacture: 2007 Control System: CNC – 3 axes (X/Y/Z) Ncjbjxz R H Uomt Dty Aen Axis Travels: X-axis: 7000 mm Y-axis: 300 mm Z-axis: 350 mm Spindle Power: 5.5 kW electrospindle Spindle Speed: up to 18,000 rpm Tool Holder: ISO 30 Tool Magazines: 2 × (5 + 1) tool positions Rsdpfoxz R H Ujx Amnjw Machining Capability: Five-sided machining with angle heads Clamps: 8 pcs, automatic positioning Operating Modes: Single-zone machining Double-zone / pendulum machining Maximum Profile Length: 7000 mm Machine Weight: approx. 3200 kg Air Pressure: 6–8 bar Equipment & Features - Automatic clamp positioning - Sawing, drilling, and milling in a single setup - Pendulum mode for continuous production - Dual tool magazines for both working zones - Suitable for long aluminium and PVC profiles - Optional Camplus software (depending on machine) Condition - Fully functional and ready for operation - All axes run smoothly - Tool magazines fully operational - Mainly used for aluminium profiles (light-duty work) - Machine is clean and in straight condition Ideal Applications - Aluminium window & door fabrication - Light-alloy profile machining - PVC profile processing - Batch and serial production - Industrial manufacturing of long profiles Please verify the accuracy of the machine specifications with the seller

Condition: used, machine/vehicle number: 008355, X axis working area: 3600 mm Y axis working area: 2120 mm Working Table: Flat table Main Electrospindle power: 13 KW Rsdeygr Urspfx Amnow Number of controlled axes: 5 axes Total number of drilling spindles: 18 Total number of tool changer positions: 16

Condition: used, machine/vehicle number: 008496, X axis working area: 5920 mm Y axis working area: 1600 mm Working Table: Pod and Rail Redpfx Amoy H Dzfonow Main Electrospindle power: 16.5 KW Number of controlled axes: 5 axes Total number of drilling spindles: 23 Total number of tool changer positions: 34

Condition: used, machine/vehicle number: 008470, X axis working area: 4300 mm Y axis working area: 2205 mm Working Table: Flat table Main Electrospindle power: 11 KW Number of controlled axes: 5 axes Total number of drilling spindles: 46 Total number of tool changer positions: 22 Rsdpfx Amoyzyrvsnow

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,970 mm, travel distance Z-axis: 455 mm, number of axes: 5, spindle motor power: 12,000 W, spindle speed (max.): 24,000 rpm, This 5-axis FORMAT4 Profit H350 1630 was manufactured in 2018. It features a robust construction with a heavy-duty welded steel frame and dual-driven moving gantry. The machine offers an impressive X-axis travel of 4000 mm, Y-axis travel of 1970 mm, and Z-axis travel of 455 mm. If you are looking to get high-quality CNC machining capabilities, consider the FORMAT4 Profit H350 1630 CNC processing center we have for sale. Contact us for further details. • Working hours: 6,442 h • Condition: Not rebuilt – without warrantyGeneral • Construction: Heavy-duty welded steel frame, reinforced • Gantry: Dual-driven moving gantry • 5-axis simultaneous machining • Control software: WoodFlash CNC • Remote service package via internet connectionWorking area and axes • Working area: X 3000 mm / Y 1550 mm / Z clearance 250 mm • Drives: X helical rack & pinion; Y/Z precision ball screws • Guideways: Linear on all axes • Lubrication: Automatic central systemMain spindle (5-axis electrospindle) • Type: Cardan-joint 5-axis spindle, right-hand rotation • Power: 12 kW (S6), full power around 12,000 rpm • Speed: 1,000–24,000 rpm • Tool interface: HSK F63 • Cooling: Liquid cooling; ceramic bearings with air cooling • Integrated aggregate holder; electrically controlled extraction hood • Max tool weight: 6 kg • Max saw blade diameter: 350 mmTool magazines • Linear magazine: 12 positions, left side of frame; separate aggregate pickup; max tool Ø 250 mm; max tool length 240 mm • Rotary disc magazine: 18 positions on moving gantry; supports drills and aggregates; max tool Ø 250 mm; max tool length 280 mmDrilling unit (DH18 6H 1S) • Vertical spindles: 12 total (7 in X, 5 in Y) • Horizontal spindles: 6 total (4 in X, 2 in Y) • Drilling stroke/depth: up to 70 mm; tool holder size 10 mm; individually controlled spindles • Integrated grooving saw: Ø 120 mm; max body thickness 5 mm; up to 7,500 rpmVacuum and clamping • Console table: 6 consoles with front/rear stops; wireless dual-circuit vacuum; vacuum cup height 100 mm • Pneumatic console locking; programmable pneumatic stops; 4 movable side stops • Reinforced support arms (40 kg each) • Vacuum pump capacity: 90 m³/h @50 Hz; 108 m³/h @60 Hz • Additional vacuum connection for template work • Controlled compressed air for frame clamps • Independent vacuum/air switching per consoleCNC software and control • WoodFlash package: CNC control, tool database (Tecno Manager), program editor, 3D preview, DXF import, CAD functions (rotate/mirror/scale/copy), engraving, pocket milling, parametric and absolute/incremental programming, machining optimization • CNC control panel: Full machine operation, program creation/editing, tool/workpiece management, manual commands, vacuum/air/safety monitoring • Mobile operator terminal: 24" LED monitor, keyboard, mouse, USB • Feed speed control terminal: Manual feed override potentiometer; variable feed during machiningSafety • CE safety system; safety mats (instead of light curtain) • Emergency stop system • Safety fence on left side; door safety monitoring • Vacuum and compressed air monitoring sensors Additional equipment Redpfjy Uyihsx Amnew • External enable switch • Protected cable chain system • Additional A and C axis locking system • Tool service kit • Polish software installation package • Polish operating manual • Saw blade changing station on gantry

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,970 mm, travel distance Z-axis: 455 mm, number of axes: 5, spindle motor power: 12,000 W, spindle speed (max.): 24,000 rpm, This 5-axis FORMAT4 PROFIT H350 16.30 CNC processing center was manufactured in 2017. It features an impressive X-axis travel of 4000 mm, Y-axis travel of 1970 mm, and Z-axis travel of 455 mm. The machine is equipped with a powerful 12 kW spindle and a dual-driven gantry system, ensuring high precision and efficiency. If you are looking to get high-quality machining capabilities, consider the FORMAT4 PROFIT H350 16.30 machine we have for sale. Contact us for further details. • Working hours: 9,370 h • Construction: Heavy-duty welded steel frame; dual-driven moving gantry • Power/Electrics: 3x400 V, 50–60 Hz • CNC software: WoodFlash suite (control panel, tool database, program editor, 2D simulator, 3D preview, DXF import, CAD functions, parametric/absolute/incremental programming, pocket milling, engraving, sequence optimization, virtual planes, subprograms) • Controls and operator interface: • CNC panel for full machine control • Mobile operator terminal with 24" LED monitor, keyboard/mouse, USB • Handheld feed control (feed override, E-stop, manual feed) • Working area and travels: • Working area: X 3000 mm, Y 1550 mm Rodpfxjy Ux Upo Amnow • Z clearance height: 150 mm • Main spindle (5-axis): • 5-axis electrospindle with Cardan joint, liquid cooled, ceramic bearings, R/L rotation • Power 12 kW (S6), 1,000–24,000 rpm • Tool holder HSK F63 • Max tool weight 6 kg; max saw blade Ø 350 mm • Integrated aggregate holder; electrically controlled extraction hood • Axis and motion system: • Dual-driven gantry • X: helical rack & pinion, hardened linear guides • Y: ball screw, hardened linear guides • Z: ball screw, hardened linear guides • Automatic central lubrication • Tool magazines: • Linear: 12 positions, aggregate pickup; max tool Ø 250 mm, length 240 mm • Rotary (on gantry): 18 positions; max tool Ø 250 mm, length 280 mm • Saw blade pickup station: max blade Ø 350 mm • Drilling and grooving: • DH18 6H 2S drilling head: • 12 vertical spindles (7X / 5Y), 6 horizontal spindles (4X / 2Y) • Drill stroke/length max 70 mm; tool holder Ø 10 mm; individually driven • Grooving saws: 2 blades (1X / 1Y), max Ø 120 mm, body thickness max 5 mm, up to 6,000 rpm • Vacuum and clamping: • Console table with 6 consoles; front/rear programmable stops • Wireless dual-circuit vacuum system; cup height 100 mm • Pneumatic console locking; 4 movable side stops; additional support arms • Vacuum pump capacity: 90 m³/h @50 Hz, 108 m³/h @60 Hz • Additional vacuum equipment: left/right template connections; controlled compressed air for frame clamps; independent vacuum/air control per console • Safety: • CE safety system, light curtain, emergency stop system • Safety fence on left side, door safety monitoring • Vacuum and compressed air sensors • Additional safety mat system Additional equipment • Additional A-axis and C-axis mechanical locking system • Remote service package via internet • Cabinet body generator software (3D cabinet design package) • Service tool kit • Documentation: Polish manuals; WoodFlash installation manual • Additional support arms for consoles • Included accessories: • 11 vacuum cups FA 140 × 115 × 100 mm • 4 vacuum cups FA 125 × 75 × 100 mmNote: Technical data provided for information only and not binding.

Condition: like new (used), Year of construction: 2024, machine/vehicle number: 305.12.001.24, functionality: fully functional, operating hours: 282 h, travel distance X-axis: 3,260 mm, travel distance Y-axis: 1,630 mm, travel distance Z-axis: 225 mm, workpiece length (max.): 2,500 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 85 mm, number of axes: 3, number of slots in tool magazine: 8, actuation type: electric, total length: 3,260 mm, total width: 1,630 mm, table length: 2,500 mm, table width: 1,250 mm, Equipment: CE marking, For sale: CNC machining center PROFIT H08 13.25, year 2024 Technical data: Axis travel: X = 3260 mm Y = 1630 mm Z = 225 mm Working area: X = 2500 mm Y = 1250 mm Z = 85 mm Equipment: Matrix worktable Stops around the working area Guide system in X, Y, and Z axes Automatic central lubrication High-performance vacuum system (180 m³/h) 10 kW HSK F63 electrospindle DH8 drilling head 8-position tool magazine (side-mounted on the machine frame) Control terminal for machine operation Electrical control cabinet CE-compliant safety system I can send a video of the machine in operation. Rjdpfx Ameyzfaxenow Net price – VAT invoice 23%.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, WoodWop 7.1 (updated in 2018, cost approximately €9,500) Working area X: 4000 mm Working area Y: 1600 mm C-axis electrospindle, 11 kW power, HSK 63F mount 17 vertical drilling heads Horizontal drilling head with cross positioning + blade Milling and edge trimming unit 360° edge gluing unit Combined edging and scraping unit Edge banding magazine with 2 stations Circular magazine with 12 stations Control system: Power Control PC 85 Work table with 8 rails and vacuum cups Elmo Rietschle vacuum pump Safety mats Chip conveyor Includes 4 aggregates (edge trimming blade, edger, combined edge scraper/edger, horizontal 4-spindle drilling unit) and vacuum cups. Rjdeyprr Nepfx Amnjw Only approximately 4,100 operating hours. Machine in excellent condition Available immediately