Used Electrospindle for sale (223)

Condition: used, machine/vehicle number: 008167, X axis working area: 6000 mm Y axis working area: 1750 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Fedjx A Hczjpfx Aptjgg Number of controlled axes: 5 axes Total number of drilling spindles: 30 Total number of tool changer positions: 72

Condition: used, machine/vehicle number: 008169, X axis working area: 4500 mm Y axis working area: 1550 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Fgjdsxaud Ispfx Aptog Number of controlled axes: 4 axes Total number of drilling spindles: 31 Total number of tool changer positions: 22

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 760 mm, spindle speed (max.): 10,000 rpm, overall weight: 26,000 kg, tool weight: 15,000 g, spindle motor power: 30,000 W, controller manufacturer: FANUC, controller model: Series 18i-MB, number of axes: 4, This 4-axis EDEL Koordimatic XL 4020 gantry milling machine was manufactured in 2003. It features a substantial working area of 4000 x 2000 mm and a maximum spindle speed of 10,000 rpm. The machine is equipped with a powerful 30 kW electrospindle and has a travel distance of 760 mm in the Z-axis. If you are looking to get high-quality milling capabilities, consider the EDEL Koordimatic XL 4020 machine we have for sale. Contact us for further details. • Condition: Refurbished (used) • Functionality: Limited functionality • Power: 30 kW (40.79 HP); electrospindle after full regeneration (new bearings and clamping system) • Working area: 4000 x 2000 mm • Rapid traverse X/Y/Z: 20 / 20 / 15 m/min • Rotational speed (max): 300 rpm • Tool magazine: 36 positions (damaged – no changer arm) • Distance table to spindle center: 150 mm • Mount diameter: 50 mm Fjdjyw Nppspfx Aptsgg Technical Specification Taper Size SK 50

Condition: used, MECAL MC 304 ATLAS Machining Center – Year 2007 4-axis machining center equipped with a frontal machining head, specifically designed for aluminum processing. General Features: Maximum working length: 7430 mm Positioning accuracy: ± 0.015 mm Positioning repeatability: ± 0.015 mm Installed electric power: 8 kW Power supply voltage: 380 V – 50 Hz Frequency: 50 Hz Operating pressure: 6 – 7 bar Air consumption per cycle: 80 Nl X Axis (Longitudinal) *Useful working stroke: 7210 mm *Continuous torque at locked rotor: 6 Nm *Rapid feed speed: 80 m/min *Acceleration: 1.5 m/s² Y Axis (Transversal) *Useful working stroke: 550 mm *Continuous torque at locked rotor: 6 Nm *Rapid feed speed: 60 m/min *Acceleration: 1.5 m/s² Z Axis (Vertical) *Useful working stroke: 500 mm *Continuous torque at locked rotor: 6 Nm *Rapid feed speed: 60 m/min *Acceleration: 1.5 m/s² A Axis (Rotating Spindle Axis) Fgjdpexfr Hdjfx Apteg *Rotation range: ± 180° *Continuous torque at locked rotor: 6 Nm *Positioning speed: 90°/s *Acceleration: 1.5 m/s² Electrospindle *Maximum speed: 24,000 rpm *Rated power (S6 60%): 9 kW - 10 HP *Tool holder type: ISO 30 Tool Magazine *Tool positions for drilling and milling: 7 *Maximum tool diameter: 16 mm *Tool holder + tool length: max 150 mm *Saw blade positions: 1 *Maximum external saw blade diameter: 200 mm Additional Features *Internal saw blade diameter: 22 mm *Tool holder + tool length: max 150 mm *Machine weight: 3500 kg Machine Dimensions *Length: 9500 mm *Width: 2200 mm *Height: 2600 mm *Total weight: 4600 kg

Condition: used, machine/vehicle number: 005521, X axis working area: 4000 mm Fodpfx Apevctlgjtogg Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 4 axes Total number of drilling spindles: 30 Total number of tool changer positions: 24

Condition: used, machine/vehicle number: 005289, X axis working area: 7400 mm Y axis working area: 1550 mm Fodpfxewcyacs Aptjgg Working Table: Flat table Main Electrospindle power: 11 KW Number of controlled axes: 4 axes Total number of drilling spindles: 10 Total number of tool changer positions: 14

Condition: new, Year of construction: 2025, Semiautomatic milling machine with four electrospindles for water slot MLA WS42 EVO, new Fgodpfjwqlmdex Aptog

Condition: used, machine/vehicle number: 006228, X axis working area: 3700 mm Y axis working area: 1550 mm Fedpfx Asy Nkwrsptegg Working Table: Flat table Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Total number of drilling spindles: 7 Total number of tool changer positions: 8

Condition: used, Year of construction: 2012, number of axes: 5, working width: 1,240 mm, working length: 3,060 mm, Equipment: CE marking, TECHNICAL DETAILS Machining process: Drilling, Milling Working area X-axis: 3,060 mm Working area Y-axis: 1,240 mm Max. panel thickness: 200 mm Number of working areas: 2 Table type: Flat table Table design: Nesting Table length: 3,060 mm Table width: 1,240 mm Number of controlled axes: 5 Drilling unit Number of drilling units: 1 Installation position: Top Vertical drilling spindles: 12 Horizontal drilling spindles X-direction: 4 Horizontal drilling spindles Y-direction: 2 Total number of drilling spindles: 18 Milling spindle Number of milling spindles: 1 Installation position: Top Controlled axes: 5 Spindle cooling: Liquid cooling Grooving unit Number of grooving units: 1 Installation position: Top Design: Fixed grooving unit Grooving direction: X-direction MACHINE DETAILS Power of main electrospindle: 8.5 kW Power of milling spindle motor: 8.5 kW Fodpfszmvqvex Aptegg Control system: PC Control Programming software: Xylog Plus Number of vacuum pumps: 1 Suction capacity per pump: 250 m³/h EQUIPMENT CE marking Front safety mats 16-position tool magazine on the machining head Automatic tool changer Vacuum suction cups for workpiece fixing The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6487

Condition: used, machine/vehicle number: 008184, X axis working area: 8200 mm Y axis working area: 1600 mm Working Table: Pod and Rail Main Electrospindle power: 13 KW Number of controlled axes: 5 axes Total number of tool changer positions: 22 Fgodpfxeyxmv No Aptsg

Condition: new, Year of construction: 2026, functionality: fully functional, power: 9 kW (12.24 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 2,200 mm, travel distance Y-axis: 2,900 mm, travel distance Z-axis: 350 mm, workpiece length (max.): 2,800 mm, workpiece width (max.): 2,100 mm, workpiece height (max.): 300 mm, number of axes: 3, number of slots in tool magazine: 12, actuation type: electric, total height: 2,275 mm, total length: 4,060 mm, total width: 3,315 mm, overall weight: 1,700 kg, Equipment: documentation/manual, The 2128 PANA ATC is a next-generation DANIBRUM CNC router, designed for modern workshops and manufacturing facilities seeking high productivity, consistent precision, and efficient automation in a single, fully integrated machine. Equipped with a 12-position automatic tool changer (ATC) and ISO30 tool holder system, the machine offers rapid tool changes and extended flexibility for processing a wide variety of materials: particle board, MDF, solid wood, plastics, Alucobond, and composites. Fjdpfxsymcnce Aptsgg The robust machine frame is supported by 25 mm linear guides, helical rack and pinion drives M1.25, and 750 W servo motors, ensuring fast, smooth movements and precise positioning across all axes. The 9 kW air-cooled electrospindle, with speeds up to 18,000 rpm, is controlled by an 11 kW inverter, allowing fine speed adjustment and stable performance under load. The result is a reliable, fast, and versatile CNC router, tailored to the current demands of furniture production and industrial processing.

Condition: used, Double gantry-type machining center with two independent operating heads working on independent tables. • Year of manufacture: 2012 • Number and type of spindles / Machining heads: Two independent, liquid-cooled 5-axis heads (typically 2+2 compact electrospindles per head) operating up to 24,000 RPM. • Installed power / Electricity: 50 kW / 380 V / 50 Hz • Air consumption: Standard operating requirements for Bacci multi-axis pneumatic clamping and extraction circuits (typically a nominal pressure of 6 to 7 bar). • Machine weight: Approx. 6,000 kg • CNC / Control system: Industrial OSAI CNC system with high-speed servo drives. • Software included: Complete, featuring PITAGORA 3D optimization and simulation software for dynamic workload balancing. Fgodpfx Aszmhz Hjptog • Material handling integration: Fully integrated automatic hopper feeder system for synchronized loading and unloading of workpieces. • Data and system backups (critical advantage): For a seamless commissioning and startup, we include: o Complete copies of all parameter files for servopacks and inverters/frequency drives. o Full copies of the OSAI system BIOS and hard drive clones. o Backups on dedicated PCs containing Pitagora configurations. o Complete original documentation, both in physical and digital formats.

Condition: used, machine/vehicle number: 007686, X axis working area: 3765 mm Y axis working area: 1560 mm Working Table: Flat table Main Electrospindle power: 13.2 KW Number of controlled axes: 3 axes Fgjdpfx Aou Tliysptog Total number of drilling spindles: 18 Total number of tool changer positions: 12

Condition: new, Year of construction: 2026, Working area: 1500 – 3000 x 2100 – 12000 mm Fodpfx Aen Nv H Ssptjgg Z axis range: 500 – 1500 mm Linear bearing: Bosch Rexroth 35 Speed: X, Y up to 45 m/min; C, A up to6000 degrees/min Program resolution: 0,0005 mm Positioning accuracy: 0,01 mm Gate drive: double-sided master / slave with gate angle correction Electrospindles: 8 kW up to 36 kW Electrospindle inverter: yes Maximum revolutions of the electro-spindle: 24 000 rpm (option 6000, 40 000 50 000) Construction: Steel welded, ribbed, stress relieved, precision machined Table type vacuum, hybrid, steel, aluminum with M16 or M18 holes

Condition: used, machine/vehicle number: 008470, X axis working area: 4300 mm Y axis working area: 2205 mm Working Table: Flat table Main Electrospindle power: 13 KW Number of controlled axes: 5 axes Fedpfxjyzyrvo Aptsgg Total number of drilling spindles: 46 Total number of tool changer positions: 22

Condition: used, machine/vehicle number: 007289, X axis working area: 3200 mm Fsdpfx Apjwukyqjtegg Y axis working area: 900 mm Main Electrospindle power: 4.5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 16

Condition: new, Year of construction: 2026, Technical Data Control System: Multi-axis real-time interpolator with active trajectory prediction, LAN communication, EtherCat, sampling time below 2 ms, correction map, RTCP, remote service access. Working Area: X: 2500–4000 mm, Y: 6000–12000 mm Z-Axis Clearance: 300–700 mm Drive System: Servo drives with EtherCat protocol, X and Y axes with hardened and ground helical racks (accuracy class 6), Z axis with ball screw (accuracy class 5) Linear Bearings: Trapezoidal guide rails Traverse Speed: up to 80 m/min Software Resolution: up to 0.0001 mm Positioning Accuracy: 0.01 mm Gantry Drive: Dual-sided master/slave with gantry angle correction Electrospindles: 12 kW up to 50 kW powered by inverter Tool Taper: ISO30 or HSK63 ER32 Fedpsn Sk Huofx Aptogg Maximum Electrospindle Speed: 24,000 rpm (optionally 6,000; 40,000; 50,000) Construction: Welded, ribbed, stress-relieved steel frame, precision machined Table Type: T-slot aluminum grid, solid aluminum, or solid steel Equipment Options: - Material positioning and correction via camera, laser, or measuring probe - Linear or turret tool magazine - Tool cooling with oil mist or chilled air - 3D scanner (laser or contact) - Positioning bases - Additional angular/rotary axes - Drilling and angular heads - Pneumatic workpiece clamps - Part marking - Integration with industrial robot - 3D CAD/CAM software - Automatic central lubrication - Automated liquid cooling system #ploter #CNC #router #millingrouter #machiningcenter #3axis #4axis #5axis #3D #3Dprint #MDF #HPL #Plywood #chipboard #steel #aluminium #aluminum #brass #stainlesssteel #castiron #polypropylene #polycarbonate #acrylic #fermacell #BLUM

Condition: new, Year of construction: 2026, functionality: fully functional, Working range in X – Y – Z mm: 4,200 x 2,200 mm • Continuous worktable Fjdpfxsyk Acns Aptegg • Lateral and rear reference stops • Gantry-type machine with Gantry system – Dual drive • Milling unit with 4-axis electrospindle, brand HSD • Saw unit for 360° cutting via HSD electrospindle • Air cooling • ISO 30 tool holder • Inverter • 10-position tool magazine • Control system: OSAI • Software • Easy programming • File import capability • Remote control panel/remote console • Teleservice and video diagnosis: real-time solution • Automatic guide lubrication • Lateral safety guards for the unit

Condition: used, machine/vehicle number: 007601, X axis working area: 4320 mm Y axis working area: 2245 mm Working Table: Flat table Main Electrospindle power: 9 KW Fjdju N Skfspfx Aptsgg Number of controlled axes: 3 axes Total number of drilling spindles: 16 Total number of tool changer positions: 8

Year of construction: 2011, condition: reconditioned (used), functionality: fully functional, X-axis travel (longitudinal axis) 4300 mm Y-axis travel (transverse axis) 270 mm Z-axis travel (vertical axis) 300 mm Electrospindle 1 HSD - max 18000 rpm - power 5.5 kW Tool magazine capacity 8 Bevel gearbox for lateral machining Number of vices 4 Vices positioning: automatic Weight 1950 kg Fgodpfxjvi N H Te Apteg

Condition: used, machine/vehicle number: 008355, X axis working area: 3600 mm Y axis working area: 2120 mm Working Table: Flat table Main Electrospindle power: 13 KW Number of controlled axes: 5 axes Total number of drilling spindles: 18 Total number of tool changer positions: 16 Fjdpoygr Urjfx Aptjgg

Condition: new, Year of construction: 2026, Technical Specifications Control System: Multi-axis real-time interpolator with active trajectory prediction, LAN and EtherCat communication, sampling time below 1 ms, correction map, RTCP, remote service access. Working Area: 2100 x 3100 mm (option: 2100 x 4100 mm) Z-axis Clearance: 100 – 300 mm Drive System: Servo drives with EtherCat protocol, X and Y axes with hardened, precision-ground helical racks (accuracy class 6), Z-axis with ball screw (accuracy class 5), intelligent energy recovery. Linear Bearings: Trapezoidal rails with protective strip. Traverse Speed: Up to 80 m/min Programmable Resolution: 0.0001 mm Positioning Accuracy: 0.01 mm Gantry Drive: Dual-sided master/slave system with gantry angle correction. Electrospindles: 8 kW to 36 kW powered by inverter. Tool Taper: HSK63F Max Electrospindle Speed: 24,000 rpm Frame Design: Welded steel, rib-reinforced, stress-relieved, precision-machined. Table Type: Vacuum table Optional Equipment: - Linear drives - Material positioning and correction via camera, laser, or touch probe - 12-position turret tool changer - Air-cooled tool system - 3D laser or touch scanner - Positioning stops - 12-spindle drilling aggregate, angular aggregates - Pneumatic sections - Panel storage - Label printer, code reader - Workpiece identification system - CAD/CAM software for furniture, carcass, and front design - Automatic labeling - Pressure rollers for material feed - Chip extraction system #ploter #CNC #millingrouter #machiningcenter #3axis #4axis #5axis #3D #3Dprint #MDF #HPL #Plywood #Particleboard #Chipboard #steel #aluminium #aluminum #brass #stainlesssteel #castiron #polypropylene #polycarbonate #acrylic #fermacell Fgedpfx Aporlkxmoteg

Condition: new, K’MX EVO with 7 axes has been designed for machining of parts from Ø 3 to Ø 32 mm. The highlight of this series is 2 oil-cooled electrospindles (built-in motor), with a power output of 10.5 kW on the main spindle. Fgsdpfx Apjuq A D Rotjg The stroke of the spindle is up to 400 mm. The two separate tools racks can simultaneously machining (ex roughing and finishing). The two separate tools racks can simultaneously machining (ex roughing and finishing). Optionally, both linear slides are equipped with driven tools to perform simultaneous drilling and milling. These 2 tools racks are complemented by end working attachment for internal operations with the possibility to turn simultaneously on the main and sub-spindle. In optional, possibility to mill thanks to ddriven tools. The large space permits better chip evacuation and maximum accessibility. - Rigid - Large working space - Up to 4 simultaneous cutting tools in contact - 2 independent racks with 5 positions

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Standard Equipment and Accessories - Swiveling operator panel easily accessible for the operator, "eye-S 15" electronic control system. Includes: * 15" touchscreen monitor * Direct control of 6-8 axes with manual, semi-automatic, and automatic operating modes * Operator assistance with the option to manage 3 different points on the tool for accurate determination of the reference point (zero point) * Capability to store up to 1000 programs with associated images * Capability to store up to 1000 different tools with associated images * USB port * Ready for network connection - Operator aid on the electronic control, including: * Tool database management * Display of coordinates at 3 points on the tool for new reference (zero) point determination * Management of tool edge speed * Operator support for common machining tasks - "Flex" milling fence with automatic adjustment via the electronic control system. Complete fence adjusted to tool diameter, infeed jaw for required chip removal. Movable "FLEX" fence from the worktable. - Aluminium fence jaw for the milling fence with inserts for continuous support - "Fast" table insert, manually adjustable, replaces table rings for optimal workpiece support surface - Electrical pre-wiring for a power feed unit - Spindle rotation direction: right/left - Automatic motor start - Version M-E includes: * Electrospindle with max. performance from 3,400 rpm * Electrospindle power 7.5 kW (10 HP) [S6 -40%] * Interchangeable MK5 spindle * Inverter for speeds from 900 to 12,000 rpm - Interchangeable MK5 milling spindle Safety/Protection - Milling guard, max. tool diameter 160 mm - Electronic motor brake effective even without mains power - Safety sensors during tool change for: spindle stop, spindle lock, opening/closing of tool holder - Electropneumatic spindle lock - Microsafety switch on machine door - Emergency stop button - Lockable main switch - Motor protection switch - Control circuit 24V - CE Declaration of Conformity - Frequency 50 Hz - Base - MACHINE LANGUAGE: German - Standard safety regulations - Manual device for feed support height adjustment according to workpiece thickness with mechanical digital display and horizontal adjustment according to tool diameter. Thanks to the operator panel column, this device allows the feed support to be swung away from the work table. - Voltage 400 V, EU - Quick tool clamping system "T-SET" Allows clamping/unclamping of tools via easy application with a compressed air gun. - L'invincibile TI 5 CE version - "LL" version worktable with two cast iron table extensions; total length 2500 mm, complete with extendable support rail for wide workpieces - Emergency stop switch - Milling spindle diameter 30 mm Availability: short-term Fodjx Nbzuopfx Aptsgg

Condition: new, Year of construction: 2026, Technical data: Control system: Multiaxis real-time interpolator with active trajectory prediction, LAN communication, EtherCat protocol, sampling time under 1ms, correction map, RTCP, remote service access. Working area: 1500 – 3000 x 2100 – 12000 mm Z-axis clearance: 500 – 1200 mm Drive system: Omron servo drives with EtherCat protocol, X and Y axes equipped with helical, hardened and ground racks, precision class 6; Z axis with ball screw, precision class 5. Linear bearings: Bosch Rexroth 35 Travel speed: X, Y axes up to 45 m/min; C, A axes up to 6000 degrees/min Software resolution: 0.0005 mm Fedstz Sgiepfx Aptogg Positioning accuracy: 0.01 mm Gantry drive: Dual-sided master/slave configuration with gantry angle correction Electrospindle: 8 kW to 36 kW Print heads: - G.12 with throughput up to 12 kg/h - G.20 with throughput up to 20 kg/h - G.50 with throughput up to 50 kg/h - G.200 with throughput up to 200 kg/h Maximum spindle speed: 24,000 rpm (options for 6,000, 40,000, or 50,000 rpm) Construction: Welded, ribbed, stress-relieved, and precision machined steel frame Table type: Vacuum, hybrid, steel T-slot, aluminum T-slot, aluminum vacuum with M16 or M18 holes Optional features: - Tool cooling - Linear or rotary tool magazine - Rotary axis on the table - Laser scanner - Positioning bases - Oscillating unit - 5-axis software package Granulate 3D printers can process a wide range of thermoplastics, such as PLA, ABS, PETG, polyamides, or polypropylene. #ploter #CNC #millingrouter #machiningcenter #3axis #4axis #5axis #3D #3Dprint #MDF #HPL #Plywood #chipboard #steel #aluminium #aluminum #brass #stainlesssteel #castiron #polypropylene #polycarbonate #acrylic #fermacell #BLUM