Used Erika 60 for sale (20,757)

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Bjdpfx Abowc Afhscowh Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Condition: good (used), machine/vehicle number: 1021, RECORD ROLL PRESS MACHINE Bjdpoc Ur Nasfx Abcowh dough dividing and kneading machine for rolls weight range from 35 gr. to 100 gr Connection 16 Ah

Condition: ready for operation (used), Year of construction: 2001, operating hours: 85,355 h, functionality: fully functional, machine/vehicle number: 71.405627, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain Millplus, table width: 630 mm, table length: 500 mm, TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 700 mm Travel Z-axis: 600 mm Number of pallets: 2 pcs Pallet clamping surface: 500 x 630 mm Max. load pallet changer (one-sided): 600 kg Max. load pallet changer (double-sided): 1,200 kg Max. table plate rotation: 13.6 rpm Feed rate: max. 15,000 mm/min Rapid traverse speed: max. 40 m/min Set-up operation: 2,000 mm/min Magazine positions: 60 slots Max. tool weight: 10 kg Max. tool diameter: 100 mm Max. tool length: 350 mm Measuring System Resolution: 0.001 mm Input increment: 0.001 mm Positioning tolerance: 0.010 mm MACHINE DETAILS Control: Heidenhain Millplus Dimensions & Weight Machine without tool magazine: 8,400 kg Weight of tool magazine (60 tool positions): 600 kg Floor dimensions: 4.50 m × 2.72 m × 2.63 m Electrical Data Rated power: 44 kVA Current consumption, maximum: 64 A Bodpfx Absyfhahocewh Current draw: 80 A Supply voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Operating Hours Power-on hours: 96,878 h Spindle hours: 85,355 h

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 0-201-09-5124, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,650 mm, controller model: Homatic PC 85 Power Control, TECHNICAL DETAILS X-axis working range: 6,000 mm Y-axis working range: 1,650 mm – up to 1,750 mm for milling Max. travel height during edge banding: 60 mm Max. applicable edge height: 65 mm Minimum internal radius: 30 mm Automatic tool changer: 18 positions Drilling head: 27 spindles (4 kW) Max. unit saw blade diameter: 200 mm MACHINE DETAILS Control system: Homatic PC 85 Power Control Software: WoodWop Electrospindle C Vector: 11 kW, HSK F63 Edge specification: Rolls, PVC / ABS 0.4 - 3 mm Bodoydl Nwspfx Abcjwh EQUIPMENT 10 adjustable support rails for vacuum cups Loading and unloading aid with 8 pneumatic rods Vacuum cup positioning with laser system Edge banding unit with 360° rotation, glue pot, and preheater for granular EVA glue Rubber-coated pressure roller + Rubber-coated pressure roller Preheating lamp Edge trimmer and edge scraper Edge holder magazine Front and side safety system with carpets Protective cage around access area Chip extraction with motorized conveyor belt Air conditioning for machine control cabinet Automatic lubrication system Vacuum pump

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, spindle bore: 65 mm, spindle speed (max.): 5,000 rpm, bar passage: 60 mm, controller model: Siemens 840D Powerline, counter spindle speed (max.): 5,000 rpm, TECHNICAL DETAILS Spindle bore: 65 mm Bar capacity: 60 mm Main spindle max. speed: 5,000 rpm Bsdpfx Asya Ecvsbcswh Counter spindle speed: 5,000 rpm MACHINE DETAILS Control: Siemens 840D Powerline Machine weight: 3,500 kg EQUIPMENT C-axis IEMCA bar feeder Master 880/33 HF (bar length up to 3,200 mm) KSS coolant supply / cooling unit Hinged belt chip conveyor

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,806 kg, axle configuration: 3 axles, first registration: 01/2022, total length: 13,400 mm, total width: 2,460 mm, suspension: air, color: white, Year of construction: 2022, Equipment: cooling unit, full service history, power assisted steering, Technical specifications FP 60 SMART. Cooling unit Thermo King SLX i 300-50, Diesel/Electric. Container type double rear doors, 3 piece aluminium hinges on each door half; quick replacement doo Tool box, PVC, left side behind the axles, dimensions approx. 650x490x450 mm. Fuel tank plastic, for approximately 240 ltr., tank opening on both sides, cover with cylinder lock. Tyres - 6 x 385/65 R22.5. Internal length: 13310mm. Internal width: approx. 2460mm. Internal height: 2650mm. Total height (unl Pallet box for 36 Euro-pallets. Chassis MB 7350 NOVA GREY SDGL. Axles including hub RAL 9005 JET BLACK. Bjdpfjxw R E Nsx Abcewh Ventilation flap, at the front wall, at top of left side. Ventilation flap, at rear, left side at to spare wheel.

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,809 kg, axle configuration: 3 axles, first registration: 05/2020, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2020, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Bwjdsyghc Sspfx Abcsh Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels Spare wheel (6+1) tyres - 385/65R22.5 (11.75x22.5) Loading capacity 33 euro paletts Length/width/heigth - 1341cm/246cm/265cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 410 kg 3 axles Pallet rack for 36 Euro pallets TrailerConnect S.KO COOL country package wave 3

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,809 kg, axle configuration: 3 axles, first registration: 04/2019, total length: 13,400 mm, total width: 2,460 mm, suspension: air, color: white, Year of construction: 2019, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Loading capacity 33 euro paletts Length/width/heigth - 1340cm/246cm/265cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 410 kg 3 axles Pallet rack for 36 Euro pallets Bodpfoyghcxox Abcowh

Condition: new, PRICE: 1800 EUR The machine is characterized by simple operation, easy cleaning, and maintenance as well as stability during operation Bwsdpeikvrdefx Abceh It is suitable for factories dealing with meat processing, restaurants, kitchens, and other catering facilities Dimensions: 850× 450× 850mm Electrical power: 0.12kW Volume: 60 liter Delivery time: immediately after the advance payment (100%)

Condition: good (used), Manufacturer: KNOLL Machine type: KTS-40-60-T-G Overall dimensions: 550 x 600 x 1800 mm Output:18,5 kW RPM: 2930 Bwjdok E Dxkepfx Abcsh Loading capacity depending on viscosity.

Condition: excellent (used), Catalogue number 7695 TECHNICAL DATA - shaft width: 640mm - number of knives: 4 - max thickness of processed workpiece: 200mm *from above: - pawls - feed roller, toothed, sequential (split, segmented) - pressure rollers - planing shaft - pressure rollers - outfeed roller, smooth *from below: - slip roller, smooth, at entry - feed roller, smooth, at exit - adjustable rollers in the lower table - electric table elevation - main motor: 7.5kW - stepless feed speed adjustment: 8-24m/min - extraction port diameter: 180mm - dimensions (L/W/H): 1400x1100x1650mm - weight: 1650kg Net price: 17,900 PLN Net price: 4,260 EUR (based on 4.2 EUR rate) (Prices may change with greater fluctuations) Bodpfsyg Inuox Abcowh

Condition: new, Wide belt sanding machine for calibrating and fine sanding Working width mm 1,100 Min/ Max. working height mm 4/ 170 Sanding belt width mm 1,115 Sanding belt length mm 2,150 Gear motor kW 2.2 Feed speed m/min variable Infeed and outfeed support rollers for long and short workpieces Oscillating belt cleaning 1st unit Oscillating belt cleaning 2nd unit Oscillating belt cleaning 3rd aggregate 10” touch screen control panel “eye-S” 1. Aggregate steel roller 2. Aggregate rubberized calibrating roller 85SH 3. Aggregate combi-aggregate pneumatic seg. sanding pad /rubberized sanding roller 35 SH Motore power 1st unit kW 18.5 Motor powert 2nd & 3rd aggregate kW 18.5 Version "B" for RRCS with: Pneumatic switching on and off 1st aggregate Pneumatic switching on and off 2nd aggregate Pneumatic switching on and off 3rd aggregate "MESAR" with elastic segmented sanding pad Pneumatic switching on and off of the sanding pad unit electronic adjustment of the working height Bjdpfx Aboitvkuecewh SPECIAL PRICE! IMMEDIATELY AVAILABLE

Year of construction: 2016, condition: ready for operation (used), - USED - TRAVELLING COLUMN MILLING MACHINE LONGITUDINAL TRAVEL: 6000 mm TRANSVERSAL TRAVEL: 1500 mm VERTICAL TRAVEL: 2500 mm RAPID FEEDS L-T-V: 35 m/min SPINDLE: 337- 5000 rpm; 42 kW; 1180 Nm WORKTABLE: 300 x 2500 x 7000 mm Bedjx Ru Azepfx Abcowh HEAD: ISO 50 ; MILLESIMAL POSITIONING ; A/B AXIS AUTOMATIC TOOL MAGAZINE: PICK-UP ; 12 POS CONTROL UNIT: HEIDENHAIN TNC 640 HIGH PRESSURE COOLANT: 20 Bar NOTE: AUTOMATIC HEAD CHANGE; COMPRESSED AIR INSIDE THE TOOL; RTCP; AUTOCAL SOFTWARE FOR AUTOMATIC CALIBRATION

Condition: used, machine/vehicle number: 006106, Max. panel width: 700 mm Max. panel length: 2500 mm No of Top Units: 1 Bsdpoyg Ec Ajfx Abcjwh Positioning of Units by NC: yes Lateral horizontal groups: yes

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516305X00543, Year of construction: 2020, operating hours: 2,780 h, load capacity: 3,000 kg, power: 17 kW (23.11 HP), fork length: 2,400 mm, overall weight: 5,100 kg, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bwedpjyhft Defx Abcoh Load capacity: 3,000 kg Fork dimensions: 2,400 x 120 x 50 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,833 x 1,200 x 2,275 mm Weight with battery: 5,100 kg Drive power: 17 kW Operating hours: approx. 2,780 h EQUIPMENT Charger Note: The seat surface and curtains are damaged.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516305X00366, Year of construction: 2020, operating hours: 8,560 h, load capacity: 3,000 kg, power: 17 kW (23.11 HP), fork length: 2,400 mm, overall weight: 4,680 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bedoyhfnhspfx Abcjwh Load capacity: 3,000 kg Fork dimensions: 2,400 mm x 120 mm x 50 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,813 x 1,200 x 2,775 mm Weight with battery: 4,680 kg Drive power: 17 kW Operating hours: approx. 8,560 h EQUIPMENT Charger Note: The tailgate is slightly damaged.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516301X00329, Year of construction: 2020, operating hours: 5,990 h, load capacity: 2,500 kg, power: 17 kW (23.11 HP), fork length: 2,400 mm, overall weight: 4,680 kg, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,500 kg Fork dimensions: 2,400 x 120 x 50 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,813 x 1,200 x 2,775 mm Weight with battery: 4,680 kg Drive power: 17 kW Operating hours: approx. 5,990 h EQUIPMENT Charger Bwodpfx Abeyhfi Secjh Note: The curtain and seat are damaged.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516301X00322, Year of construction: 2020, operating hours: 9,350 h, load capacity: 2,500 kg, power: 17 kW (23.11 HP), fork length: 2,400 mm, overall weight: 4,680 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,500 kg Fork dimensions: 2,400 x 120 x 50 mm MACHINE DETAILS Dimensions & weight Bodpfeyhfgqox Abcjwh Dimensions (L x W x H): 4,813 x 1,200 x 2,775 mm Weight with battery: 4,680 kg Drive power: 17 kW Operating hours: approx. 9,350 h EQUIPMENT Charger Note: The curtain on the left side and the seat are damaged.

Condition: used, Year of construction: 2013, machine/vehicle number: M313, Technical Specifications & Performance Data This MESAL filling monoblock is a tri-block configuration that integrates rinsing, filling, and capping on a single compact rotary platform. Engineered for PET bottle handling and designed for still beverages such as juice and tea, it delivers reliable performance and consistent product quality for industrial packaging and beverage production. With automatic operation, weight (gravimetric) filling, and a robust rotary carousel design, this unit is suitable for scaling a used bottling line or expanding second hand beverage production capacity with modern automation. Manufacturer: MESAL Model: E50-60-15GA1 Year: 2013 Production speed: up to 18,000 bottles/hour Configuration: Rinser/Filler/Capper tri-block Filler valves: 60 Rinser grippers: 50 Capper heads: 15 Container type: PET Base format: 0.38L (380 ml) Neck finish: 38 mm Fill principle: Weight (gravimetric) Operating type: Automatic Electrical: 400 V, 60 Hz Control system: Omron PLC/HMI Approximate weight: 8,000 kg Advanced Automation & Control Systems The machine is equipped with an Omron PLC-based control system and touch HMI for efficient operation, diagnostics, and format adjustments. Automated bottle handling across the rinser, filler, and capper ensures smooth transfer between turrets, with synchronized motion and recipe-driven settings to minimize changeover times. Electrical specifications are configured for industrial environments, and integrated safety interlocks support protected access during operation. Omron PLC with modular I/O and clear status indicators Touchscreen HMI for parameter management and alarms Automatic operation with synchronized turrets Designed for stable weight-based filling accuracy Electrical supply: 400 V, 60 Hz Production Line Integration Capabilities This filling monoblock integrates seamlessly into a complete beverage production line. Infeed and discharge are designed for PET bottle conveyors, with intermediate transfers between the rinser, filler, and capper to maintain continuous flow. The platform is well-suited for industrial packaging lines requiring efficient rinsing, precise filling, and reliable capping in a compact footprint. Inline integration with standard bottle conveyors Rinser/Filler/Capper tri-block layout for reduced floor space Suitable for still beverages: juice and tea Designed for PET bottles with 38 mm neck Base format 0.38L; additional formats can be supported with change parts Machine Condition & Maintenance History The machine is currently in storage. From a commercial perspective, this status typically enables inspection and testing prior to commissioning. The mechanical and electrical assemblies present a solid basis for recommissioning into a used bottling line or second hand beverage production setup. Operational status: In storage Bwjdpsyhbgasfx Abcoh Available for recommis...

Condition: new, pressure: 60bending length: 1550column width: 1250daylight: 410stroke lenght (max.): 220column throat depth: 400messurements (LxWxH): 2445x2200x2390weight approx.: 4250motor power: 7,5 Standard equipment: KK Kletzer Europe We have put together a high-quality model for Europe. The CNC press brake KK-Industries made in Turkey. Model KKI EUROPE XL The powerful EUROPA XL press brake is characterized by its high precision, accuracy and versatility. Bwsdpfx Aod En R Dobcoh Europa XL has a very large installation height and, as a result, a large stroke (cylinder travel). The projection is also above average in order to restrict yourself as little as possible. We rely on quality, which is also reflected in the management. As a standard control we have the high-quality Esa S640 (2D graphic control) Furthermore, the press brake KKI Europa XL is equipped with Y1, Y2, X via the control. We don't make any compromises when it comes to the upper tool and the die either the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is only as good as the service. For this reason we set our focus on highly qualified employees with many years of experience in the CNC sheet metal processing sector. CNC axes Y1, Y2 , X  Esa S640 (2D graphic control) Back gauge with double linear guide and ball screw 2 pieces of support arms in front, heavy version, height adjustment with hand wheel, from 175 tons heavy version on linear guide Laser safety device on the upper beam CE protective equipment various options available Option: r-Achse                                                                                   ¤ 5.375,-- Other controls: ESA 640 2D 15'' touch screen control                                     ¤ 4,520.00 inkl. ESA 675 W 3D 21'' touch screen control (Windows Base)      ¤ 6,485.00 DELEM 66 T 2D 17'' touch screen control (Windows Base)    ¤ 10,165.00 DELEM 69 T 3D 17'' touch screen control (Windows Base)     ¤ 16.350,00

Condition: excellent (used), CATALOG NUMBER 7679 TECHNICAL DATA - Maximum planing width: 610 mm - Maximum planing height, double-sided: 200 mm - Electrically adjustable table height (up/down) - Maximum planing height, four-sided: 100 mm Top section: - Driven infeed shaft, toothed - Kickback devices - Pressure unit - 2 driven shafts, toothed - Pressure unit - 610 mm planing shaft, 4-knife, 7.5 kW - Pressure unit - Outfeed driven shaft, smooth Bottom section: - Guide bar - Driven roller, toothed - 610 mm planing shaft, 4-knife, 5.5 kW - 2 smooth driven rollers Rear section: - 2 side spindles with pressure unit 1) Right vertical, 100 mm, 4 kW 2) Left vertical, 100 mm, 4 kW - Spindle diameter: 35 mm - Spindles adjustable vertically and horizontally - Manual planing width adjustment - 6 feed rates: 7 / 9 / 11.5 / 14 / 18 / 23 m/min - Feed motor: 3.1 kW - Dimensions (L/W/H): 2500 x 1800 x 600 mm - Weight: approx. 3000 kg FEATURES - Perfect for log, flooring, and similar applications - Manufactured by German brand KUPFERMUHLE - 2 horizontal planing shafts + 2 vertical spindles - Used planer, in very good condition Bodpfewtp U Rsx Abcjwh Net price: 56,900 PLN Net price: 13,550 EUR (based on an exchange rate of 4.2 EUR) (Prices may vary with exchange rate fluctuations)

Condition: used, Year of construction: 2002, Operating hours: approx. 9,000 h Bwedpfxsw Nn A De Abcsh Lifting capacity: 4,500 kg Electric forklift truck Still R 60 – 45

Condition: used, Rotatable: +- 45° Bwjdpfxotunbus Abceh Chain width: 17 mm Motor: 2.2 kW Table tilting: +- 45° Further data: See PDF Mortiser for lock cases, door lock mortiser, or also chain mortiser / chain chiseler Framar type MC 60 for simultaneous milling of lock cases and drilling door holes in doors and windows as well as many other applications. Chain width: 17 mm Motor: 2.2 kW

Condition: used, Year of construction: 2023, load capacity: 3,500 kg, lifting height: 4,670 mm, fork length: 1,200 mm, total length: 3,880 mm, - Bedienung Sitzgerät - Tragfähigkeit/Last 3500kg - Lastschwerpunkt 500 mm - Lastabstand 468 mm - Achslast mit Last vorn/hinten kg 8042/958 - Achslast ohne Last vorn/hinten kg 2662/2838 - Spurweite vorn/hinten mm 1002/900 - Neigung Hubgerüst/Gabelträger vor/zurück ° 7/7 - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 3941 - Arbeitsgangbreite bei Palette 800 x 1200 längs mm 4141 - Wenderadius 2273 mm - Kleinster Drehpunktabstand 649 mm - Fahrgeschwindigkeit (Blue-Q/Standard/Sprint) mit Last km/h 18/18/20 - Fahrgeschwindigkeit (Blue-Q/Standard/Sprint) ohne Last km/h 18/18/21 - Hubgeschwindigkeit (Plus*//Standard Performance) mit Last m/s 0,53//0,44 - Hubgeschwindigkeit (Plus*//Standard Performance) ohne Last m/s 0,57/0,51 - Senkgeschwindigkeit mit Last m/s 0,50 - Senkgeschwindigkeit ohne Last m/s 0,43 - Zugkraft (Plus*//Standard Performance) mit Last N 10300/7590 - Zugkraft (Plus*//Standard Performance) 4 ohne Last N 10650/8015 - Max. Zugkraft (Plus*//Standard Performance) 4 mit Last N 20900/16920 - Max. Zugkraft (Plus*//Standard Performance) 4 ohne Last N 20290/17170 - Steigfähigkeit (Plus*//Standard Performance) 4 mit Last % 17,8/12,9 - Steigfähigkeit (Plus*//Standard Performance) 4 ohne Last % 28,2/21,9 - Max. Steigfähigkeit (Plus*//Standard Performance) 4 mit Last % 24,2/20,6 - Max. Steigfähigkeit (Plus*//Standard Performance) 4 ohne Last % 2482/28,2 - Beschleunigungszeit 15 m (Plus*//Standard Performance) mit Last s 5,7/6,3 - Beschleunigungszeit 15 m (Plus*//Standard Performance) ohne Last s 5,0//5,4 - Betriebsbremse Hydraulisch betätigte Lamellenbremse - Umschlagleistung (Plus*//Standard Performance) t/h 258/245 Bwjdpfxoyg Rg Ts Abcsh - Energieverbrauch bei Umschlagleistung (Plus*//Standard Performance) kWh/h 8,6/8,0 - Arbeitsdruck für Anbaugeräte bar 250 - Ölstrom für Anbaugeräte l/min 55 - Schalldruckpegel LpAZ (Fahrerplatz) dB(A) 70 - Humanschwingung: Beschleunigung nach EN 13059 m/s² 0,57 - Anhängerkupplung, Art/Typ DIN Bolzen

Condition: new, The R 60 VT PRO is a high-quality radial drilling machine that belongs to the Radial Drilling Machines category, representing the latest generation of conventional radial drill presses from KNUTH. This versatile machine simplifies the machining process, supporting precise drilling, countersinking, and thread cutting—ideal for single parts and small batch productions. Built with premium cast materials, its robust design features a large column and torsion-resistant boom, ensuring stability and reliability. Key functionalities include an electronically controlled servo quill feed with a large touchscreen display, automatic thread cutting capabilities, and a powerful coolant system, all designed to streamline operations. The machine offers adjustable height for the boom, central lubrication for maintenance ease, and a variety of user-friendly interfaces for setting operating parameters. With a drilling capacity of 60 mm and throat depth from 350 to 1,600 mm, this robust and advanced radial drilling machine makes daily production tasks smoother. You can request a quote or order online to enhance your machining capabilities with the R 60 VT PRO. Bodpfx Aju E Hzwobcowh