Used Erika 60 for sale (21,644)

Condition: good (used), Screw conveyor, screw conveyor, screw conveyor, conveyor technology, trough screw conveyor -Replacement screw: for injection molding machine -Execution: stable -Screw length: 1900 mm -Screw diameter: 60 mm -Screw pitch: mm -Pipe diameter: mm -Support: Ø mm -Transport dimensions: 60 x 1900 mm Cedectyq Depfx Anuehd -Weight: 24 kg

Condition: used, Spindle centering tool Manufacturer: Kelch Diameter of centering bore: 60 mm Steel cross-section: 34 mm x 34 mm Diameter of bolt circle for fixing bore: 102.5 mm Length: 450 mm Cedpscp Azxefx Anuehd Width: 135 mm Height: 105 mm

Condition: used, Year of construction: 1984, round bar steel 45 mm square edge steel 40 mm L-beam 120 x 13 mm flat steel 500 x 12 mm punching pressure 60 t throat 510 mm Codpfx Ansgvkmnouehd 500 x 12 oder 400 x 16 mm punch diameter 27 in 17 mm punch diameter 39 in 12 mm oil volume 80 l total power requirement 7,5 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 1,8 x 0,9 x 1,8 m Hydraulic machine with 5 stations so punching, notching, shearing flat iron, angle iron, solid material, punching with hand lever, profile steel side with foot switch. Punching discharge: 510 mm! All performance data refer to a material strength of 450 N / mm². Electric 380 volt

Condition: good (used), Year of construction: 2020, operating hours: 10,713 h, load capacity: 5,000 kg, lifting height: 3,850 mm, fuel type: electric, mast type: duplex, construction height: 2,850 mm, Manufacturer + model: STILL RX 60 - 50 / 600 Mast: 2W3850 ID: 25011.6088 Cedpfxozuubcs Anushd Category: Used Mast: 2W Forks: 2400 mm Lowered height: 2850 mm Lifting height: 3850 mm Capacity: 5000 kg Year: 2020 Hours: 10713 hours Capacity: 80 v / 930 ah Options: - LINDE control system - Duo pedal !!! - New NON-marking tires!! - Front and rear windshields!!!

Condition: used, Year of construction: 2020, operating hours: 583 h, functionality: fully functional, working width: 650 mm, area performance: 3,900 m²/h, overall weight: 292 kg, tank capacity: 60 l, water tank capacity: 60 l, The Kärcher B60 BP Dose W R65 is a 2020 model and has 583 operating hours. It has been completely disassembled by us, and each component has been checked for functionality and cleaned. The roller brush deck has been fitted with new bearings and new brushes. The suction foot is equipped with new, oil-resistant rubber lips. Four new, maintenance-free batteries are included in the scope of delivery. These can be conveniently charged using the integrated charger. The roller brush deck is ideal for applications where coarse dirt particles (such as wood splinters) are present. The roller brushes "sweep" the coarse dirt particles into a separate container for coarse dirt, which is positioned directly behind the roller brushes. This prevents any particles from adhering to the suction foot, which could impair the suction performance. For efficient use of cleaning agents, the Kärcher B60 BP Dose has a chemical dosing system. Cjdpfx Aez Nfwisnuohd Technical data: Working width: 650 mm Tank volume fresh/dirty water: 60 liters Theoretical area performance: 3900 m²/h Operating weight: 292 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 3,303 h, load capacity: 4,000 kg, lifting height: 4,650 mm, free lift: 1,700 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,350 mm, battery capacity: 930 Ah, battery voltage: 80 V, DGUV certified until: 10/2027, fork length: 1,500 mm, tire condition: 95 %, total height: 2,350 mm, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, UVV, cabin, full service history, lighting, sideshift, Still RX 60-40 electric forklift with the following specifications: · Operating hours: 3,300 · Lifting capacity: 4,000 kg · Lifting height: 4,650 mm · Overall height: 2,350 mm · Year of manufacture: 2016 STILL 4.0-ton electric forklift with a fully enclosed cabin, good battery, very good tires, triplex mast with full free lift, side shifter, 4th valve, cross-lever control, lighting compliant with German Road Traffic Regulations (StVZO), fork length 1,500 mm, new charger. Chedpfx Aoz A H Axsnued Price includes service according to STILL manufacturer’s specifications and a valid UVV inspection upon sale. The following options are available upon request: • other attachments (fork positioner, rotator, pallet forks, etc.; additional cost on request) • other fork length (no additional cost) Inspection, demonstration, and test drive are available by appointment only. Sale is exclusively to commercial businesses; subject to prior sale, errors and omissions excepted. We can deliver your new forklift cost-effectively using our own ramp trailer (transport costs on request). Further information and offers can be found on our website.

Condition: good (used), Year of construction: 2018, operating hours: 20,540 h, load capacity: 3,500 kg, lifting height: 5,950 mm, fuel type: electric, construction height: 2,750 mm, Still RX60-35/600 Triplex 595 Freelift/3rd/4th function electric 2018 Continuous stock, see website. Prices are ex Nuland. Cedpfx Aozy R Ucsnushd Van de Wert Trading B.V. has a fluctuating stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices, in AS-IS condition, without warranties. (see our general terms and conditions) For a viewing and/or test drive, you can make a non-binding appointment. Please call in advance as we are not present at all times. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, mast type: telescopic, fuel type: diesel, Year of manufacture: 2013 Lifting capacity: 227 kg Please contact Gebrauchtgeräte Center for more information Chjdszymi Aspfx Anuod

Condition: used, Slow-speed pre-shredder for rubber, plastic, cables, composite materials Well-suited for material composite separation, e.g. tires, scrap cables With integrated safety shear coupling for protection against foreign objects Cedsz Hxirepfx Anuohd Rotor: 600 mm diameter x 1450 mm working width Enclosed rotor with staggered segment knives, mounted on cassettes 24 rotor knives, 2 stator knife rows Swiveling screen basket, perforation as required With feed device (pendulum arm) Drive power: 90–200 kW

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, operating hours: 2,210 h, load capacity: 4,990 kg, lifting height: 4,030 mm, free lift: 1,240 mm, mast type: triplex, battery capacity: 930 Ah, battery voltage: 80 V, Equipment: CE marking, fork extension, full service history, lighting, sideshift, STILL RX60-50/600 electric forklift, manufactured in 2022, in excellent overall condition and with only 2,209 operating hours. This high-capacity forklift is particularly suitable for industrial applications and for handling steel, heavy materials and large loads. Main specifications Manufacturer: STILL Model: RX60-50/600 Year: 2022 Operating hours: 2,209 Rated capacity: 4,990 kg Load centre: 600 mm Power: electric Voltage: 80 V STILL battery: 80 V – 930 Ah Battery weight: 2,178 kg Battery charger: 80 V – 180 A Rated drive power: 22 kW Super-elastic tyres Mast Three-stage triplex mast: Lift height: 4,030 mm Free lift: 1,240 mm Closed mast height: 2,250 mm Maximum overall height: 5,090 mm Mast tilt: 7° forward / 5° backward Fork equipment Chedpfozqz Inox Anusd The forklift is equipped with a: Side-shifting fork positioner, frame width 1,550 mm Fork dimensions: 1,600 × 150 × 50 mm Also included is a pair of 2,400 mm CE-certified fork extensions, complete with residual capacity chart. Equipment and features STILL Easy Control colour display Minilever hydraulic controls Single-pedal driving system Front LED work lights Rear LED work light Warning beacon Acoustic reversing warning Curve Speed Control Automatic parking brake Battery discharge indicator Centralised battery water refilling system Front windscreen and rear window with wipers Safety-glass roof panel Rear-view mirrors STILL driver’s seat Configurable driving programmes

Condition: excellent (used), functionality: fully functional, Harp racks for glass transportation 60 loading slots Maximum loading height: 1300 mm Maximum loading capacity: 1500 kg More technical information can be found attached as Tech. data file 4 units in stock In very good and clean condition As is Available immediately Chodpfx Anjzty Rmeuod

Condition: good (used), Year of construction: 1997, Travel range X/Y/Z: 600mm/525mm/500mm Spindle speed: 20 - 6300 rpm, continuously variable and programmable Tool holder: SK40 Feed rate: max. 10m/min Rapid traverse rate X and Y axes: 18m/min Documentation available (see images) Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Machine buying and selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, ETC. Hob Awypjzvflhoakst Do you need a high-quality but affordable machine for your production? Or do you want to sell yours? Chsdpfxezxq D Ij Anued For further information or to contact us, please use the contact form.

Condition: used, functionality: unexamined, Year of construction: 2025, load capacity: 227 kg, empty load weight: 7,756 kg, construction height: 2,540 mm, total length: 8,150 mm, arm reach: 11,150 mm, construction width: 2,490 mm, working height: 20,160 mm, Articulated telescopic boom lift Cedpfx Anozu Eavsujhd Speed class: 6.44 Technical condition: Normal Description: Our equipment is regularly serviced and inspected. We offer rental, sales, service, and repair – you can get everything you need from a single source. We also offer lease-purchase options, financing, and the purchase of used equipment. Our team will be happy to provide you with expert and personalized advice. Simply call us or send us a message via SMS or WhatsApp.

Condition: used, Year of construction: 2008, x-travel 630 mm y-travel 560 mm z-travel 560 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 10 / 15 kW max. Torque 130 / 87 Nm tool taper HSK-A63 swivellable NC: ° table surface area 1.000 x 600 mm T-slots 9x 14 x H7 max. table load 700 kg number of toolpositions 60 pos. tool taper HSK-A63 total power requirement 49,7 kVA weight of the machine ca. ca. 11,0 t dimensions of the machine ca. 4,5 x 4,5 x 3,5 m CNC - MachiningCenter Universal DECKEL MAHO - DMU 60 monoBLOCK - 4 axes (+ NC dividing head) - Swivel-Millinghead - Spindle refurbished Csdsx A H Rlopfx Anuehd - NEW X, Y, Z guideways - NEW ball screws - NEW X-axis bellows

Condition: used, B 60 W BP DOSE (ROLLER) Ride-on Scrubber-Suction Machine The B 60 W Bp Dose ride-on scrubber-suction machine is equipped with a drive system, a maintenance-free 120 Ah battery (2 units), and a user-friendly key system. This system enables simple and safe operation by regulating access and operating rights to protect against incorrect use. The machine is ideally suited for cleaning textured floors and can cover areas of up to 2,500 square meters. The brushes can be quickly and easily installed and replaced. Thanks to the eco!efficiency mode, the battery life is significantly extended, and the integrated tank flushing system makes it easier to clean the dirty water tank after floor cleaning. - Ride-on scrubber-suction machine (60 l) with drive system. - Ideal for 1000 - 2500 m². - Energy-saving eco!efficiency mode. Proven dual-disc technology ■ Brush heads can be quickly installed and replaced. Chsdex Hvvzspfx Anuod Powerful drive system ■ Comfortable driving with stepless speed adjustment (forward and reverse). ■ Pre-settable maximum speed. ■ Operation via drive levers directly on the handle. With Dose detergent dosing system. ■ With on-board detergent dosing. ■ Precise and even dosing (adjustable up to 3%). ■ No contamination of the tank, as it is only filled with fresh water. Technical data Power supply V / Hz 100 – 240 / 50 – 60 Working width, suction mm 850 Tank, fresh/dirty water l 60 / 60 Brush speed rpm 600 – 1300 Brush pressure kg 37 Battery Ah 120 Battery type maintenance-free Battery charging time h 4.7 Sound pressure level dB(A) 71 Water consumption l/min 3.6 Drive type battery Drive drive motor Mains connection, charger V / Hz 100 – 240 / 50 – 60 Dimensions (L × W × H) mm 1520 × 748 × 1160 Item condition: used, the pictures may differ, as the item is available in multiple units. Quantity: 1x Kärcher ride-on scrubber-suction machine B 60 W Bp Dose General signs of wear include all damage that can be expected due to age and operating hours. You can find more cleaning machines - new and used - in our shop! International shipping costs on request!

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 1,000 h, load capacity: 300 kg, construction height: 2,720 mm, total length: 9,400 mm, arm reach: 12,300 mm, construction width: 2,490 mm, working height: 20,300 mm, Telescopic aerial work platform Speed class: 4.82 Technical condition: good Battery condition: good Description: Our equipment is regularly serviced and inspected. We offer rental, sales, service & repair – you can get everything you need from a single source. We also offer lease-purchase options, financing, and the purchase of used machinery. Our team will be happy to provide you with competent and personalized advice. Simply call us or send us a message via SMS or WhatsApp. The Genie S-60 J is a powerful telescopic aerial work platform for working at heights outdoors and on uneven terrain. With a working height of up to 20.3 m, a high lateral reach, and all-wheel drive, the machine is ideal for assembly, maintenance, and construction work, even in hard-to-reach locations. Robust, off-road capable, and easy to operate. Further information and a non-binding inquiry can be found on our website – Safe working at any height. Cedpfx Anjyafbljujhd

Condition: used, Year of construction: 1991, Allis Chalmer 60 109 M-II Primary Gyratory Crusher 2 complete units, intake size: 1,500 mm (60 inches), cone diameter: 2,725 mm (109 inches), output size: 175 to 250 mm (7 to 10 inches), throughput: approx. 4,700 to 6,400 t/h, without electric motor (required drive power: 750 kW), including one hydraulic hammer each, total weight: approx. 570 t per unit Csdpfovg A Raox Anujhd

Condition: used, Year of construction: 2023, load capacity: 2,500 kg, lifting height: 6,120 mm, fork length: 1,200 mm, total length: 3,650 mm, - Geräteart Elektro - Bedienung Sitz - Lastschwerpunkt 500 mm - Lastabstand 420 mm - Achslast vorne mit Last kg 6335 - Achslast hinten mit Last kg 816 - Achslast vorne ohne Last kg 2393 - Achslast hinten ohne Last kg 2258 - Bereifung Superelastik - Spur vorne mm 992 - Spur hinten mm 900 - Neigung Hubgerüst/Gabelträger, vor ° 3 - Neigung Hubgerüst/Gabelträger, zurück ° 9 - Sitzhöhe/Standhöhe (SRP) mm 1139 - Kupplunghöhe mm 485/365 - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 3654 - Arbeitsgangbreite bei Palette 800 x 1200 längs mm 3852 - Wenderadius mm 2032 - kleinster Drehpunkt mm 539 - Fahrgeschwindigkeit mit Last km/h 19 - Fahrgeschwindigkeit ohne Last km/h 20 - Hubgeschwindigkeit mit Last m/s 0,46 - Hubgeschwindigkeit ohne Last m/s 0,55 - Senkgeschwindigkeit mit Last m/s 0,52 Chedpsyt Skyofx Anusd - Senkgeschwindigkeit ohne Last m/s 0,45 - Zugkraft mit Last N 8000 - Zugkraft ohne Last N 8110 - Max. Zugkraft mit Last N 17440 - Max. Zugkraft ohne Last N 17220 - Steigfähigkeit mit Last % 21,3 - Steigfähigkeit ohne Last % 29,5 - Max. Steigfähigkeit mit Last % 25,5 - Max. Steigfähigkeit ohne Last % 29,7 - Beschleunigungszeit mit Last s 4,5 - Beschleunigungszeit ohne Last s 4,2 - Betriebsbremse elektr./mech. - Fahrmotor, Leistung KB 60 min kW 15 - Hubmotor, Leistung bei 15 % ED kW 16,3 - Batteriespannung V 80 - Arbeitsdruck für Anbaugeräte bar 250 - Ölmenge für Anbaugeräte l/min 30

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 3,628 h, load capacity: 6,000 kg, lifting height: 3,850 mm, fuel type: diesel, mast type: simplex, construction height: 2,860 mm, fork length: 2,400 mm, tire condition: 90 %, front tire type: superelastic tires (black), rear tire type: superelastic tires (black), drive type: Diesel, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, UVV, air conditioning, cabin, lighting, pallet forks, Diesel forklift Load center: 500 Chjdpfx Asy Nt T Njnuod Fork width: 1600 mm ISO class: ISO Class 4 = 5,000 - 10,000 kg Mast type: Standard Condition: Refurbished, no warranty Technical condition: very good Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 80 - 100% Description: maintained and inspected according to FEM 4.004 (UVV). Completely repaired, serviced, and checked. Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, safety light, rotating beacon, air conditioning

Condition: good (used), machine/vehicle number: 3162, Year of construction: 1998, load capacity: 52,000 kg, lifting height: 7,500 mm, fork carriage width: 300 mm, fork length: 3,500 mm, total length: 8,500 mm, total width: 4,250 mm, operation weight: 65,300 kg, additional equipment features: Centralized greasing system, SveTruck 52120-60 from Uniktruck Cedpfxsyuh Rre Anushd

Condition: used, Year of construction: 2020, operating hours: 546 h, functionality: fully functional, overall weight: 219 kg, tank capacity: 17 l, The used Kärcher CV60/2 RS is a stand-on carpet brush vacuum from 2020 with approximately 546 operating hours. Featuring two counter-rotating brush rollers and a practical side broom, the versatile CV 60/2 RS brush vacuum is ideal for cleaning textile floor coverings and all types of hard surfaces. For vacuuming smaller areas, the machine is equipped as standard with a retractable suction hose and wand, a combination floor nozzle, and small nozzles. Technical specifications: Working width: 61 cm Codpfx Asy Am D Uenushd Dust bag volume: 17 liters Dimensions: 1120 x 640 x 1290 mm

Condition: used, Year of construction: 2011, x-travel 630 mm y-travel 560 mm z-travel 560 mm Cjdpfxeyz Dcfo Anuehd control iTNC 530 Heidenhain turning speed range - main spindle max. 12.000 min/-1 power capacity - main spindel 10 / 15 kW max. Torque 130 / 87 Nm tool taper HSK-A 63 swivellable NC: ° table surface area 1.000 x 600 mm table diameter Ø 600 mm T-slots 1x 14 x H7, 8x 14 H12 max. table load 500 kg rotatable C: 360 ° number of toolpositions 2x12 (24) pos. tool taper HSK-A 63 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool weight 8,0 kg max. tool length 315 mm total power requirement 45 kVA weight of the machine ca. 6,8 t dimensions of the machine ca. 4,5 x 4,5 x 2,5 m CNC - MachiningCenter Universal DECKEL MAHO - DMU 60 monoBLOCK - Swivel-Millinghead - Package for tropical climate

Condition: used, Year of construction: 2008, machine/vehicle number: DEPAL43, Used TMG VEGA 60 automatic Depalletizer 5000 BPHTechnical Specifications & Performance DataThis Automatic Depalletizer VEGA 60 is a robust solution engineered for reliable bottle handling in industrial packaging environments. Manufactured by TMG, it supports efficient unloading of bottles from pallets and integrates automatic interlayer management for streamlined operation. With a production speed of 5000 bph, it is well-suited for medium-capacity beverage production and used bottling line applications. Its design ensures consistent performance for Glass containers, particularly in 1.5L formats.Manufacturer: TMG Model:VEGA 60 Year: 2008Production speed: 5000 bphBottle formats: Compatible with 1.5L bottle formatsContainer types: Designed for Glass bottle handlingAutomation: PLC-controlled operationSafety: Electronic safety barrier Interlayermanagement: Tier-sheet magazine with automatic interlayer removal; can remove protective hoods from the same magazine Advanced Automation & Control Systems The VEGA 60 features PLC-based automation for precise and repeatable operation across shifts. The control logic enables smooth layer-by-layer depalletizing, coordinated motions, and clear fault diagnostics. The electronic safety barrier provides active operator protection, ensuring safe access during setup and maintenance while maintaining productivity. Quick settings allow fast adaptation to standard 1.5L bottle handling and efficient start-up after pauses.Production Line Integration CapabilitiesThis depalletizer integrates easily within new or second hand bottling equipment configurations. It can operate as a standalone depalletizing module or inline with conveyors, accumulation tables, rinsing machines, and downstream filling, capping, and labeling machinery. The automatic tier-sheet handling reduces manual intervention between layers, improving flow to subsequent packaging machinery. Its design supports Glass bottle logistics, making it a flexible choice for beverage production lines handling water, juice, beer, or wine in compatible formats.Machine Condition & Maintenance HistoryProfessionally engineered by TMG in 2008, this machine is presented as a second hand industrial packaging asset suitable for immediate integration once installed and commissioned. The PLC control and robust mechanical design contribute to predictable maintenance intervals and long service life.Operational Performance & VersatilityAt 5000 bph, the VEGA 60 is ideal for medium-output operations seeking dependable depalletizing performance. Automatic interlayer and hood removal minimize manual handling, reducing changeover time between pallet layers and enhancing workplace safety. The system is optimized for 1.5L bottles and supports Glass containers, aligning with a wide range of beverage production requirements and used bottling line upgrades.Installation Requirements & Site PreparationThe depalletizer requires adequate floor space for pallet infeed, tier-sheet magazine access, and discharge conveyor alignment. Power supply must match the PLC and drive requirements, and provision for compressed air may be needed for actuators and safety systems. A level, reinforced floor and clear operator access paths are recommended t... Codpfx Aszc Hqyenushd

Condition: ready for operation (used), Year of construction: 2000, Available immediately ex-works: CNC vertical machining center, Quaser Type MK 60 II Year of manufacture: 2000 CNC control: Fanuc 18 M Chjdpfxe Aa Irps Anued Table: 1050 x 550 mm Travel ranges X/Y/Z: 1020/610/560 mm Spindle taper: SK 40 Tool magazine: 36 positions Spindle speeds up to 10,000 rpm Power at the spindle: 15 kW Internal cooling system Weight: 8.5 tons Price: EUR 8,500.00 plus VAT, ex-works.

Year of construction: 2011, condition: like new (used), Universal Grinding Machine from Chevalier apply for toolmaker , mold maker, education and Locksmith Pressure: 60.0 t Csdpfeiitwnex Anuehd Square steel: 35.0 mm Pressure: 60.0 t Square steel: 35.0 mm Angle steel: 120x120x12 mm Round steel: 40.0 mm Punching cross-section in qmm: Ø28 in 15 / Ø38 in 11 mm Throat: 220 mm Flat steel: 200x20 / 300x15 mm Blade length: 317 mm Oil capacity: 45,0 ltr. Working height: 940 / 1140 mm Strokes per minute: max. 26 Working stroke: 55,0 mm Total power requirement: 4.0 kW Machine weight approx.: 1425 kg. Dimension HxWxD: 1510 x 590 x 1570 mm