Used Ess Ecomag 304 for sale (11,916)

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 15-35-19-01, total length: 29,011 mm, total width: 1,995 mm, total height: 1,250 mm, input voltage: 400 V, Equipment: documentation/manual, The device is in working order, but is currently out of service and stored in a dry, warm area. It can be started upon prior arrangement. All technical documentation and a CE declaration are available for the device. Rcjdpfo Af Ng Nex Airoh A detailed description, including specifications, can be found in the attached .pdf documents.

Condition: used, Year of construction: 2017, machine/vehicle number: 1000020374, functionality: fully functional, operating hours: 5,484 h, power: 12.8 kW (17.40 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: DC, travel distance X-axis: 3,280 mm, travel distance Y-axis: 1,660 mm, travel distance Z-axis: 240 mm, number of axes: 5, number of slots in tool magazine: 16, controller manufacturer: Biesse, actuation type: pneumatic, Equipment: CE marking, documentation/manual, We are selling a 5-axis machining center, Biesse Rover A 1632 Smart, manufactured in 2017. The machining center is in very good condition due to relatively infrequent use since its purchase. We are the first owner. I have attached the file "Cartellino_1000020374" to the listing below. This is a manufacturer's document describing the configuration of the offered machine according to Biesse standards. Technical specifications of the machining center: ‣ Working areas *: X = 3280 mm; Y = 1580 to 1660 mm, depending on operating conditions. Z = 200 mm (configuration with 5-axis unit, drilling head, and H=74 mm modules). Z ​​= 240 mm (configuration with 5-axis unit, drilling head, and H=29 mm modules). ‣ Configuration 2 ‣ 6 ATS tables – 18 carriages ‣ Rear row stops with 115 mm travel and 25 mm extension. ‣ Intermediate row stop located at coordinate 1190 mm with 140 mm travel. ‣ 4 side stops with 140 mm travel (2 right + 2 left) with pneumatic system. ‣ Sensor to verify stop retraction. ‣ 4 support bars for H=74 mm modules. ‣ Claw-type vacuum pump with 250 m³/h capacity. ‣ Vacuum module – Size 132x146 – H74 mm with high-friction surface and pre-installed vacuum seal. ‣ Vacuum module – Size 132x75 – H74 mm with high-friction surface, pre-installed vacuum seal, and pre-installation for locating pins. ‣ Vacuum module – Size 132x54 – H74 mm with high-friction surface, installed vacuum seal, and pre-installation for locating pins. ‣ Automatic lubrication system. ‣ Sawdust and chip removal conveyor. ‣ 5-axis interpolating machining unit, 13 kW (17.4 HP), HSK F63 tool holder, liquid-cooled. ‣ Coolant supply unit. ‣ Additional Z-carriage for machining units, controlled by an independent Z-axis. ‣ BH 17 L drilling head. ‣ 16-position rotary tool magazine on the X-carriage. ‣ 12-position linear tool magazine mounted on the machine frame. ‣ HSK F63 adapter with integrated flange for saw blades used in 5-axis units. ‣ 300 mm diameter saw blade for integrated-flange mounting. ‣ bSolid software. Redpfx Aoz R I U Ioirech If the information above is insufficient, please contact me and let me know what you would like to know. Upon request, I can provide a document in English with a detailed description of our machining center's layout. Best regards, Ihor Balychev.

Condition: good (used), Year of construction: 2018, machine/vehicle number: 1000028154, functionality: fully functional, Equipment: rotational speed infinitely variable, The machine was commissioned in 2019, single owner. It has seen very little use. Description Useful working area, 5-axis configuration: X=3280mm, Y=1600mm Axis travel: X=3706mm, Y=2294mm, Z1=515mm, Z2=371mm Axis traverse speed: X=80m/min, Y=60m/min, Z=30m/min Electrospindle: HSD, 5 axes 11 kW, with continuous 360° rotation on B and C axes, enabling high-precision machining of complex shapes liquid-cooled Drilling head: HSD 20 vertical spindles 4 horizontal spindles grooving discs on X-axis grooving discs on Y-axis Rcedpoxdl H Uofx Airsh Work table: 6 cross beams Isbjwhypnjni Itxtobb 4 suction cups per beam preparation for uniclamp Tool magazines: 16-position revolver-type tool changer Vacuum system: Vacuum pump with a capacity of 250 m³/h, ensuring firm clamping of the parts during processing

Year of construction: 2025, condition: new, machine/vehicle number: 100119-4, Description:  Screen deck system consisting of 1 deck for separating old wood or wood chips  Input material 0-200 mm Rcjdpfx Aijg I Uqiersh  Capacity approx. 80 m³/h (material-dependent)  Material separation into 2 fractions: 0-25 mm and oversize  To be mounted on customer-supplied impact plates or a base frame Technical data:  Screen deck 1: Length = 5,200 mm; Width = 1,215 mm o External dimensions: Length = 5,500 mm; Width = 1,850 mm o Screen area 6.3 m², number of shafts 40 o Drive: 2 x 9.2 kW geared motors o Screen body: Polyurethane (star screen) D 166 / 12 fingers o Screen shafts as a plug-in system (easy and cost-effective adaptation to other grain sizes possible) o Bearing lubrication located externally, optional central lubrication system available at an extra cost Delivery time approx. 16 to 18 weeks.

Condition: excellent (used), max. wheel diameter 300 / 400 mm gear width 76 mm max. module 6 min. module 0,5 Control BWO CNC 921 adjustment of stroke position 94 mm/Hub stroke 82 mm no. of strokes 75 - 1000 Hub/min number of teeth 5 - 200 taper of shaper cutter SK 45 table diameter 400 mm Rcedpfxjzq Hmcj Airoh total power requirement 50 kW weight of the machine ca. 7,5 t dimensions of the machine ca. 5,0 x 3,8 x 3,4 m Machine in top condition.

Condition: like new (used), Year of construction: 2021, machine/vehicle number: 1000047728, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, number of axes: 3, number of slots in tool magazine: 168, total length: 12,000 mm, total width: 4,500 mm, table length: 3,100 mm, table width: 2,205 mm, Equipment: CE marking, documentation/manual, FT Plus matrix table Working area: 3,100 x 2,205 mm Multi-zone vacuum system with 10 clamping areas Electrospindle: 19.2 kW Boring head: BH 10 16-position rotary tool changer 8-position rotary tool changer Rcjdpfx Asz R N R Dsiroh 2 x 290 m³/h vacuum pump Sweeping arm Automatic label printing in the loading zone Outfeed conveyor belt for workpieces: 3,740 mm

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, number of axes: 3, controller manufacturer: Biesse workshop, actuation type: electric, Vertical machining center with turning capabilities. Rede Afp D Djpfx Airech

Condition: excellent (used), Year of construction: 2011, operating hours: 361 h, functionality: fully functional, machine/vehicle number: 7428122100001.105, pressure: 6 bar, power: 16,500 kW (22,433.73 HP), temperature: 120 °C, operating temperature: 120 °C, total height: 4,300 mm, total length: 8,700 mm, nominal heat output: 165 kW (224.34 HP), total width: 3,700 mm, tank capacity: 33,500 l, empty load weight: 35,000 kg, We offer this Viessmann VITOMAX 200 hot water boiler in very good condition, manufactured in 2011. It is currently stored and preserved with nitrogen. Manufacturer: Viessmann Model: VITOMAX 200 Year of manufacture: 2011 Rcsdpfx Aiezlc Edjrjh Type: hot water boiler Operating hours: 361 If you have any further questions or require additional information, please do not hesitate to send us a message or call us. Ioan Munteanu

Condition: new, Year of construction: 2026, Pallet Truck with Electronic Scale The pallet truck with an electronic scale, thanks to its precise weighing system, enables easy weighing of loads up to 2000 kg. This is essential in the transport and wholesale trade sectors, where weight control of goods is crucial for order fulfillment and regulatory compliance. It is also an ideal solution for distribution centers, where fast transport and simultaneous weighing of goods help optimize workflow. Thanks to its exceptional structural and technological features, this pallet truck can also be used in the food industry, where maintaining the highest hygiene standards and easy machine cleaning is vital. Stainless steel is a material that performs excellently against aggressive chemicals, making the truck safe to use in a variety of environments, ensuring reliability and long-term performance. This modern lifting truck with a scale is also used in bulk material warehouses and production facilities, where precise material weighing is key to maintaining proper quality and quantity standards. The truck is easy to operate, and its electronic scale allows for fast and accurate weighing of goods, significantly increasing operational efficiency. Therefore, the pallet truck with an electronic scale is an indispensable tool for any company where transporting and weighing loads happen in a single process, providing convenience, time savings, and error minimization. Technical Specifications Load capacity: 2000 kg Overall height: 1210 mm Body height: 450 mm Min. fork height: 85 mm Lifting height: 110 mm Fork length: 1150 mm Steering arm length: 400 mm Overall length: 1550 mm Fork width: 170 mm Fork spacing: 556 mm Rcedpfx Ajxg Nftoirjh Turning radius: 1400 mm Wheelbase: 1220 mm Dimensions (L1+L2)xB2xH1 Fork wheel diameter: Ø80x70 mm

Condition: new, Rexroth CMP60.2-SP-304-FN-NNNN-NW control unit MNR: R911170645-GC1 SN, unused in opened original packaging, 100% functional, scope of delivery as per photos. Rcsdpfx Aex Dw Scsireh

Year of construction: 2025, condition: new, Description:  Screen deck system consisting of 1 deck for separating old wood or wood chips.  Input material: 0-200 mm  Capacity: approx. 80 m³/h (material-dependent)  Material separation into 2 fractions: 0-25 mm and oversized fraction  To be mounted on customer-owned impact plates or a substructure Rcsdpjg I Uqfofx Airjh Technical Data:  Screen deck 1: Length = 5,200 mm; Width = 1,215 mm o External dimensions: Length = 5,500 mm; Width = 1,850 mm o Screen area: 6.3 m², Number of shafts: 40 o Drive: 2 x 7.5 kW geared motors o Screen body: Polyurethane (star screen) D 166 / 12 fingers o Screen shafts as a plug-in system (easy and cost-effective adaptation to other grain sizes) o Bearing lubrication positioned externally; optional central lubrication available at an extra cost

Condition: used, Year of construction: 2001, Edge banding machine BIESSE ARTECH Ergho 3 - Manufacturer: Biesse - Type: ARTECH Ergho 3 - Year of manufacture: 2001 - Edge banding and edge magazine CB-700 - Flush trimming unit IN-701 Cut and wrap adjustable from 0-3.6-11-15 degrees with 12,000 RPM. - Flush milling unit RI-700 - Chamfer milling unit SI 700 - Surface scraper blade RBK-501 - Buffing unit - Working height approx. 900 mm - Workpiece thickness 10 - 50 mm - Workpiece width min. 50 mm - Workpiece length min. 150 mm - Edge thickness (roll material) 0.4 - 3 mm - Edge thickness (strip material) 0.4 - 15 mm - Edge width 13 - 55 mm - Feed rate 10 m/min - Electrical supply 400 V - 50 Hz Rcedpfx Ais Agwd Doroh - Connected power 6 kW - Compressed air connection 6 bar - Extraction 1 x D = 80 mm - Overall length of the machine approx. 4080 mm - Weight 1640 kg

Condition: good (used), Year of construction: 2015, functionality: fully functional, TS07 Control System · 7” LCD Touch Screen graphical display Edge trimming unit RT02, 1 set of diameter trimming cutters, H=65 mm for edge trimming unit RT02 Gluing unit SP03 End trimming unit IT03 Fine trimming unit RF02 Edge rounding unit AR02 Rodpfezuavlsx Airoch Edge scraper RB02 Glue scraper unit RC02 Cleaning unit LPT02 Anti-adhesive unit ADZ02 AX-1, NC axis on the stop AX-1, motorized, controlled pressure beam AX-1, NC axis for pressure rollers for the gluing unit AX-4, NC axis for the fine trimming unit AX-2 NC axis on the edge rounding unit AR02 AX-4 NC axis on the edge scraper RB02

Condition: used, Year of construction: 2017, input voltage: 400 V, input frequency: 50 Hz, number of slots in tool magazine: 8, Equipment: CE marking, Biesse Klever 2236 G FT CNC machining centre Technical data: Working field: X = 3811mm, Y = 2189mm, Z = 150mm Maximum axes speed: X = 22.5m/min Y = 22.5m/min, Z = 12.5m/min Presetter (Digital device for contact measurement of tool length with diameter up to 100 mm). Rjdpfxj Af S Eko Airsch Automatic lubrication system Express Pack Vacuum locking system - Klever 2236 G FT 2 x 300 m3/h rotary claws vacuum pump Side rack toolchanger on machine's base frame for HSK F63 - 10 tools Upgrade to the stratified phenolic FT worktable Additional reference stops with pneumatic lowering HSK F63 Electrospindle - 9.0 kW (12 Hp), aircooled in replacement of the one included in basic nmachine config. Boring head BH17 L for Klever G FT 2236 bSolid bNest - Software module for nesting process CE (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 244500 € 600 to 6050 mm 4 (Y1, Y2, X, R) 365 mm 5100 mm 510 mm 700 mm hydraulisch 80 mm/s 6,5 mm/s 80 mm/s 1000 mm 350 mm/s 300 mm/s 250 mm 990 mm 154 mm 280 l 2 x 11 kW kW 7600 mm 2650 mm 3950 mm 52500 kg Standard equipment: 4 axes (Y1, Y2, X, and R) SVP (Servo Variable Pump) Technology SKY 22 CNC control - 21.5” Full HD graphic display with 2D and 3D visualization of the programmed workpiece - Intuitive touch-screen operation (easy drawing of the bending contour using your finger) - User-friendly, interactive programming in either 2D or 3D mode - 2D and 3D simulation of the bending process - Automatic tool selection in 3D mode - Automatic calculation of the developed length for sheet metal blanking - Automatic bending sequence calculation - Graphical product and tool library - Correction/adjustment capability - USB ports and Ethernet connection for importing, backing up, and exporting programs - Windows operating system - Support for importing IGES, STEP, and DXF files Servo-driven backgauge mounted on linear guides with ball screws spindles Backgauge finger blocks mounted on dual linear guides CNC-controlled crowning (anti-deflection system) Tool system Durma Rcodpfx Aio Agw Sijrsh Without tools Fiessler AKAS laser safety system mounted on the upper beam Sheet support arms on linear guides Oil fill Operating manual in German or English, including CE Declaration of Conformity Options: Z1/Z2 axes, Delta X axis, or 6-axis backgauge Delem CNC control DA-66S or DA-69S CAD/CAM software Bending support system Angle measuring system And much more PRICE FCA TÜRKIYE

Condition: used, functionality: fully functional, The metal detector was only used for a very short period for testing purposes. Therefore, it can be considered to be in almost new condition. Rjdpfx Aio Af Nh Aorsch

Condition: good (used), Year of construction: 2024, functionality: fully functional, Biesse ROVER C 1982 CNC Machining center (5-axis) Rjdpfx Aio Af Ii Norsch Description; Working fields X = 8125 mm; Y =1950 mm Z= 470/500 mm UPS Closed chain cable holder X-axis 12 ATS Panel supports 48 sliding bases Pneumatic locking system in 2 work areas in X 8 aluminium lifting bar supports for loading ease of large and heavy pieces. 290 m3/h rotary claws vacuum pump Vacuum module - Size 132x146 - H74mm Vacuum module - Size 132x75 - H74mm Vacuum module - Size 132x54 - H74mm Belt conveyor for the removal of chips and off-cuts 21.6 kW (29.4 HP) operating unit with 5 interpolating axes HSK F63 adaptor and liquid cooling Suction hood with continuous positioning in Z controlled by NC Air-Jet cooling system Liquid chilling unit for liquid cooled systems Chain tool changer with 22 places at 180 mm centerdistance Strengthened gripper PC bTouch Presetter for the measurement of the tool length with diameter up to 130 mm bSolid 3D CAD-CAM program Additional license for bSolid Additional filter for vacuum pump SOPHIA - IoT Connection Roller lifting support in replacement of the standard one Enlargement of mesh guards and movement of the doors from front side to rear side to load profiles with length up to 11 meters (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand colour production printer, the ‘Minolta AccurioPress C4070’. Items for sale: 1 x Minolta AccurioPress C4070 with the following specifications: Includes Fiery Controller IC-609 Includes PF-707m paper deck Includes FS-532/IQ-501/RU-518m finisher Not the right configuration? We can easily configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 678,711 Black: Approx. 277,841 Colour: Approx. 400,870 Condition: This is a second-hand machine, which may show signs of wear (minor scratches or discolouration). The unit has been tested to ensure it is in working order Rodpj Agf E Aofx Airech Packaging and dispatch: You are welcome to view the unit during our opening hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course also welcome to contact us directly

Year of construction: 2025, condition: new, machine/vehicle number: Neu, Description:  Screening system consisting of 1 screen deck for separating green waste / biomass with a particle size of 0-80 mm.  Capacity up to 150 m³/h (material-dependent).  Material separation into 2 fractions: 0-80 mm and oversize.  Screen deck with enclosure and extraction for film particles.  Extraction point is adjustable.  Suction and conveying fan positioned beside the unit in a frame, with a hose diameter of 300/350 mm. Technical data:  Screen deck 1: Screen deck area, length = 6,360 mm; width = 1,215 mm o External dimensions: length = 6,690 mm; width = 1,850 mm o Screen area 5.1 m², number of shafts 24 o Drive: 2 x 7.5 kW geared motors o Screen body: polyurethane (star screen) D 340/9 fingers o Screen shafts as a plug-in system (adaptation to other particle sizes is easy and cost-effective) o Bearing lubrication via central lubrication system 24V (without control; must be integrated into the system control).  Suction and conveying fan o Drive: 1 x 15 kW (optional control via frequency converter; not recommended as part of the offer). o Optional: with knife attachment. Rodpfsd Rbnqex Airech Delivery time approx. 18 to 20 weeks.

Year of construction: 2025, condition: new, Screening deck system consisting of 1 deck for screening of waste wood grain size 0-25 mm capacity approx. 80 m³/h (depending on material) Rcodpfx Aisd Rbngjroh material separation in 2 fractions 0-25 mm and oversize Screening deck with enclosure for suction system upstream acceleration belt with screen deck screwed to one unit +++ Technical data +++ Screen deck 1: Screen deck area length = 4,540 mm; width = 1,215 mm Outer dimensions : length = 4.820 mm width = 1.850 mm Screening area 5,1 m², number of shafts 34 pcs. drive 2 x 5,5 kW gear motors Screen body polyurethane (star screen) D 166 / 12 fingers Screen shafts as plug-in system (adaptation to other grain sizes easily and cost-efficiently possible) Lubrication of bearings placed outside, optional central lubrication possible at extra cost Enclosure 2 mm plates screwed together +++ Acceleration belt +++ drive 1 x 2,2 kW gear motors belt width 1.200 mm belt length approx.3.000 mm Outer dimensions : length = 3.500 mm width = 1.400 mm Delivery time approx. 25 weeks

Condition: used, Year of construction: 2016, CNC machining center Manufacturer: Biesse Type: Rover A1432 Year of manufacture: 2016 Technical data 3-axis machine HSD drilling head - Maximum motor speed: 6,000 rpm - Vertical spindle travel: 60 mm - Horizontal spindle travel: 75 mm - Spindle bore: 10 mm - Saw blade diameter: 80-120 mm Drive power: 17.3 kW Redpfx Ais Ad Iw Toroch Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is non-binding.

Condition: used, Year of construction: 2016, CNC machining center Manufacturer: Biesse Type: Rover A 1643 Year of manufacture: 2016 Redo Ad Iw Hjpfx Airjch Technical data - 5-axis machine - Working area X/Y: approx. 4320 - 1620 mm Main spindle - Rated current: 14 kW - Power, short-term: 16 kW (S2 1 min.) - Maximum speed: 20,000 rpm - Tool clamping system: HSK-F63 - Cooling: as liquid - Operating mode: S1 continuous operation Drilling unit - Maximum motor speed: 6000 rpm - Vertical spindle stroke: 60 mm - Horizontal spindle stroke: 75 mm - Spindle bore: 10 mm - Saw blade diameter: 80 - 120 mm Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 60 mm, overall weight: 3,000 kg, Equipment: CE marking, Biesse Skipper 100 CNC Drilling Machine – 2013 Well-maintained Biesse Skipper 100 CNC drilling and processing machine in very good working condition. The machine was originally manufactured in 2013 and has since been refurbished. It has been carefully maintained and is currently in excellent condition for its age. The machine is being sold only because the current owner has recently invested in a new Biesse drilling machine. It has therefore become surplus to production requirements. The Skipper 100 is a highly versatile CNC machining solution designed for drilling, routing, and panel processing. Its compact design and flexible operation make it particularly suitable for furniture, cabinet, and panel manufacturing applications. Key Highlights: Manufacturer: Biesse Model: Skipper 100 Year: 2013 Refurbished Very good mechanical and operational condition Regularly maintained Rodpfx Aez Ibqboirjch Suitable for CNC drilling and panel processing Proven Biesse industrial construction Machine is available due to replacement with a newer Biesse drilling machine, not because of technical issues The machine can be inspected by appointment. Further technical information, photos, videos, and machine details can be provided upon request.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Work area X: 4320 mm Work area Y: 1500 mm Z-axis workpiece clearance: 180 mm 13 kW, 5-axis electro-spindle, HSK F63 connection Vertical drilling heads: 20 Horizontal drilling heads X: 2 Horizontal drilling heads Y: 2 Rcedpj Agncksfx Airoh 2 blades for grooving in X and Y directions 16-position revolving tool changer Work table with 8 stops NC-Hops 6.0 5-axis machine license, 1 × NC-Hops for office use, 1 × aCADemy 250 m3/h vacuum pump Chip conveyor belt Safety mats Protective screens Approximate weight: 3950 kg 3695 hours of 5-axis spindle operation and 2027 hours of drilling operation.

Condition: used, Wire feed case for inert gas welding device, shielding gas device, wire feed case -Manufacturer: Ess wire feed case, water-cooled -Type: DVK 300-3 -Accessories: hose package -Dimensions: 750/410/H430 mm Rcodpfx Aef D A Abeirsh -Weight: 32 kg