Used Face Mill for sale (10,574)

Condition: excellent (used), Bargain in excellent condition: panel saw and spindle moulder with tooling Dcedpfoy Ni Ayjx Aa Nog

Condition: used, Year of construction: 2003, x-travel 2.500 mm y-travel 800 mm z-travel 1.250 mm Control Heidenhain iTNC 426 spindle tunring speed 4.000 U/min tool taper ISO 50 Djdjy I Dg Ropfx Aa Nocg table surface area 2.200 x 750 mm max. table load 4.000 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - Automatic universal milling head, 0 and 180 degrees Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 1994, x-travel 850 mm Dcedpfx Aaey Nnxao Nsg y-travel 630 mm z-travel 550 mm table surface area 1200 x 550 mm spindle taper SK 40 spindle turning speed range 20 - 4200 U/min spindle drive 11,5 kW quill stroke 95 mm feeds longditudinal/cross/vertical 1 - 10.000 mm/min rapid traverse longitudinal and cross 10 m/min rapid traverse vertical 10 m/min control HEIDENHAIN, TNC 426 total power requirement 21 kW weight of the machine ca. 6 t Accessories: NC-dividing unit (= 4th axis) with tailstock, make HOFMANN, model RWNC-160; vertical head with hydr. tool clamping and quill retraction, solid table, electron. handwheel, coolant

Condition: used, Year of construction: 1989, x-travel 600 mm y-travel 450 mm z-travel 400 mm table-size 850 x 440 mm spindle taper SK 40 control HEIDENHAIN TNC 355 ATC 32 Pos Dcedpfey Nnw Nex Aa Nsg spindle turning speed range 20 - 4000 U/min spindle drive 5,9 kW quill stroke 80 mm feeds longditudinal/cross/vertical 1 - 2000 mm/min power feed x/y/z 7200 N rapid traverse longitudinal and cross 10 m/min rapid traverse vertical 10 m/min total power requirement 12 kW weight of the machine ca. 3 t Acc.: NC-dividing unit (=4th axis) make WALTER with 3-jaw chuck 160 mmø, vertical head with hydr. tool clamping and quill retraction, solid table, various tool fixtures, electron. hand wheel, coolant

Condition: used, Year of construction: 1994, Motor 6 / 7.5 kW with 4-roller feed, fixed speeds. Speed extensions. Height of worktable: 920 mm. Spindle tilting: -10° + 45°. Max. spindle projection above table: 175 mm. Spindle speeds: 3250/6500-5000/10000 rpm. Max. tool diameter: 250 mm. Weight: approx. 950 kg. Location: Nattheim. Djdpfx Aaew Enw Is Nocg

Condition: good (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 630 mm, CNC control Heidenhain TNC640 24-fold automatic tool changer chip conveyor coolant device Technische Daten / technical details: X-Weg / X-travel 1000 mm Y-Weg / Y-travel 600 mm Z-Weg / Z-travel 630 mm Spindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 8000 UpM /rpm Eilgang X,Y,Z / rapid feed X,Y,Z 24,24,20 m/min Tischaufspannfläche / table clamping area 1150x600 mm Werkzeugwechselmagazinplätze / number of tool places in changer 24 Dedpfxey Nbdcs Aa Njcg Antriebleistung Spindel 60%ED / drive capacity spindle 60%ED 12,5 kW Gewicht ca. / weight 6500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Make: WMZ / PITTLER, Model: PVSL N1 2/2, Year of manufacture: 2009, Machine no.: ZN022, Control: Siemens Sinumerik 840D sl Powerline including handwheel, 2 spindles, 2 workspaces, 2 cross slides, max. turning diameter: 140 mm, max. workpiece height: 80 mm, max. spindle speed: 6,300 rpm, 2x 8-position turrets, driven tool stations, chip conveyor by Knoll, extraction unit by ILT, recooling unit by Hydac, workpiece automation with raw part and finished part storage Dcsdpox Ahfwefx Aa Nsg +++ Note: Machine is part of an online open sale! +++

Condition: used, Make: DISKUS-WERKE, Model: ModuLine DS 300 SO, Year of manufacture: 2013, Machine No.: 2219, Control system: Siemens, Model Sinumerik 840D sl, 2 spindles, spindle distance 210 mm, max. speed approx. 4000 rpm, W-tool spindle / grinding spindle 2000 rpm, max. workpiece diameter 100 mm, max. workpiece height 40 mm, 8-position tool turret, manufacturer Sauter, model 0.5.480.516, tool holder type Capto C5, workpiece automation device, manufacturer DVS, model Moduline, transfer robot manufacturer Epson, PLC system control by Siemens, display with Simatic Panel Touch, coolant system by Knoll, type KF150/950, paper band filter, chip conveyor by Knoll, type 225S-2/170 +++ Note: This machine is part of an online surplus sale! +++ Dcedpfsx Ahg Ujx Aa Neg

Condition: used, Year of construction: 2012, Milling machines Travel distance X: 700 mm Travel distance Y :420 mm Travel distance Z: 380 mm Dcodpey Nxc Njfx Aa Nog HSC-machines Number of axis: 3 milling machine / machining center spindle revolutions: 24000 rpm Speed range to: 24000 U/min tool changer: 38 - time input Power : 20 kW Integrated 4th axis (TSUDAKOMA)

Condition: used, Year of construction: 1984, spindle diameter 180 mm x-travel 1000 mm y-travel 1000 mm Dcedpfxsy Nfdgj Aa Neg Control DIXI CNC 4400 total power requirement 47 kW weight of the machine ca. 17 t dimensions of the machine ca. 4835 x 2700 x 3190 m

Condition: excellent (used), Year of construction: 2021, operating hours: 100 h, functionality: fully functional, machine/vehicle number: Z45, feed length X-axis: 1,200 mm, feed length Y-axis: 700 mm, feed length Z-axis: 500 mm, feed rate X-axis: 1 m/min, feed rate Y-axis: 1 m/min, feed rate Z-axis: 1 m/min, travel distance X-axis: 1,200 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 2 m/min, rapid traverse Y-axis: 2 m/min, rapid traverse Z-axis: 1 m/min, position of the milling head: pionowa, spindle speed (max.): 2,050 rpm, spindle speed (min.): 30 rpm, total height: 2,180 mm, total length: 2,475 mm, total width: 2,260 mm, rotational speed (max.): 2,050 rpm, rotational speed (min.): 30 rpm, overall weight: 5,000 kg, table length: 1,600 mm, workpiece weight (max.): 1,800 kg, table load: 1,800 kg, table width: 500 mm, torque: 18 Nm, Equipment: rotational speed infinitely variable, Universal milling machine EUROMETAL FUS 50, year of manufacture 2021, equipped with a T-slot table 1500x500mm, servo motors on three axes X, Y, Z controlled by manual handwheels or automatic feed function, rapid traverse, digital parameter readout, ISO 50 spindle taper, mechanical spindle speed adjustment range 50-2050 rpm, swiveling vertical milling head, spindle brake for tool change, automatic central lubrication system, cooling system, work light, ER40 tool holders and holders for the head; traverse range X – 1200mm, Y – 700mm, Z – 500mm. The milling machine is in perfect condition after approx. 100 hours of operation. Djdpfey Nmngjx Aa Njcg

Condition: used, Year of construction: 1984, machine/vehicle number: 302, This Wurmbach road milling machine, model DBP SF 150, is being auctioned online as part of our industrial auction / machinery auction – combined auction for construction equipment, building materials, vehicles, site equipment, and garden technology. Dcodpfx Aey Nhtqoa Neg

Condition: used, Cutting mill / Cutting mills Manufacturer: HERBOLD Type: SMS 45/60-H5-3 Basic machine with base frame, motor, V-belt drive, without feeding/discharge and without control panel Dcedpfxjy I Tv Ue Aa Nog Rotor knives: 5 Stator knives: 3 Rotor diameter: 450 mm Rotor width: 600 mm Feed opening: 600 x 580 mm Drive: 75 kW

Condition: used, Cutting mill / Cutting mills Manufacturer: HERBOLD Type: SMS 45/60-H5-3 Basic machine with base frame, motor, V-belt drive, without feeding/discharge and without control panel Rotor knives: 5 Stator knives: 3 Dcsdpfx Ajy I Tuqsa Njg Rotor diameter: 450 mm Rotor width: 600 mm Feed opening: 600 x 580 mm Drive: 75 kW

Condition: new, Year of construction: 2026, 560 mm 320 mm 400 mm 950x450 mm 1050x320 mm 25-3600 U/min Dedjy Nnznepfx Aa Nocg SK 40

Condition: used, Year of construction: 2012, x-travel 635 mm y-travel 510 mm z-travel 460 mm table surface area 790 x 560 mm spindle taper SK 40 spindle turning speed - stepless 20 - 12.000 U/min spindle drive 13 kW max. torque on the spindle 83 Nm feeds x/y/z -stepless bis 20.000 mm/min rapid traverse 30 m/min ATC 20 Pos. tool diameter if 2 vacant positions 130 mm tool diametre at full load 80 mm tool length - max. 300 mm Dcjdpox Nqu Dsfx Aa Njg weight of tools max. 6 kg internal coolant system feed 12 bar control HEIDENHAIN, TNC 620 total power requirement 17 kVA weight of the machine ca. 3,9 t dimensions of machine L x W x H 3,0 x 1,92 x 2,35 m Accessories: electron. hand panel, chip conveyor,coolant

Condition: good (used), Code: 0375 Brand: GREDA Model: CFL 4 - CE Standard Contouring, milling, and sanding machine for contouring and milling on two opposing sides of a piece of wood, such as chair, armchair, sofa, gun handles, and various - CE Standard Technical data: N° 2 milling units N° 2 milling and sanding units N° 4 motors 7,5 Hp each N° 4 rotation reversals Max workable length 2500 mm Max workable height 180 mm Min/max workable width 20/320 mm Milling unit shaft diameter 35 mm Max milling tools dimensions diameter 160 mm - height 180 mm Carriage feed 30 mt/min Carriage return 30 mt/min Automatic table slowdown with stops Sanding belt length 2500 mm Automatic positioner N° 6 adjustable pressers Total installed power 36 Hp Compressed air 6 bar Dsdpfx Aaey Iwvrs Njcg Overall dimensions mm 6700 x 2200 x 1800 h Weight kg 3600

Condition: like new (used), Year of construction: 2022, operating hours: 850 h, functionality: fully functional, turning length: 610 mm, turning diameter over cross slide: 500 mm, turning diameter: 725 mm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 260 mm, feed length Y-axis: 80 mm, feed length Z-axis: 610 mm, torque: 250 Nm, bar passage: 65 mm, Equipment: documentation/manual, rotational speed infinitely variable, For sale: As-new EMCO MAXXTURN 65-G2 SMY, year of manufacture 2022, equipped with Siemens Sinumerik ONE with ShopTurn control! CNC turning center for complete machining of turned and milled parts. Features integrated spindle motors and a water-cooled sub-spindle (preloaded roller guides) with Y-axis on both main and counter spindle. State-of-the-art SINUMERIK ONE control with ShopTurn dialogue programming. Main spindle: - Max. bar capacity: 65 mm - Max. torque: 250 Nm - Speed range: 0–5000 rpm Sub-spindle: - Drive power: 22 kW - Max. torque: 130 Nm - Speed range: 0–7000 rpm Turret: - 12-station VDI 30 radial tool turret with directional logic for up to 12 driven tool holders - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-axis travel: +/- 40 mm Includes hollow clamping cylinder with draw tube, C-axis on main and sub-spindle, Sinumerik ONE/OPERATE control, 22" multi-touch display, ShopTurn, 3D simulation, residual material detection, USB interface, electrical cabinet climate unit, reinforced coolant unit (24 bar), chuck flushing (additional pump 3.5 bar), part ejector and flushing through sub-spindle. Hydraulic unit, interface for chip conveyor, documentation and CE certificate. Control language: German/English Electronic handwheel EMCO tool breakage and wear monitoring/SINUMERIK ONE Alternating spindle speed Sub-spindle as tailstock: This cycle allows using the sub-spindle with mounted live center for workpiece support, enabling shaft part machining on machines without a tailstock by using the sub-spindle. Max. thrust force limited to 50% of max. axis force. EMCO PROFI-NET ROBOT INTERFACE: Interface for robot integration using HARTING connector, signal exchange via Profinet, safety signals two-channel/potential-free. Dodsx E Dncopfx Aa Njcg Digitalization package for Sinumerik: Condition monitoring SIEMENS ONE INTERFACE for integration with MDE/BDE systems, standard with the following information: - Machine ON - AUX ON - Automatic operation - Production mode - active program - Program running and override between 95 and 105% - Part count impulse (M30) - Programmable impulse (M300) 3D machine data/MT65-G2: 3D data model of the machine included. Pneumatically operated finished part catcher for gentle unloading – parts are transferred into a catch box (standard) or onto a conveyor belt (optional). - Max. finished part length: 175 mm - Max. finished part diameter: 65 mm - Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000 for connection of EMCO's SL1200 short bar loader. Further options available… Machine is available immediately!

Condition: good (used), Year of construction: 1981, Table work surface: 500 x 1400 mm Permitted workpiece weight: 1000 kg Strokes: X1050 Y510 Z560 Rapid feed X/Y: 12000 mm/min Rapid feed Z: 10000 mm/min Main spindle motor: 11 kW Djdpfoy H Igrjx Aa Njcg Video of machine in operation available

Condition: good (used), Year of construction: 1986, CNC universal milling machine Make DECKEL Type: FP5NC Bj.1986 control DIALOG 4 Dcedpfey H Ifbjx Aa Njg Traverse paths: X710mm Y600mm Z500mm Clamping table : 1000mm x 550mm Tool clamp: SK40 Feed speed programmable: 2 ... 3600 mm / min Speed: 18 ... 6300 rpm Spindle power: 7.5KW machine in stock.

Condition: excellent (used), With DRO Working travels 300 x 200 x 350 mm Dcjdpfx Aaey Iz Rmj Njg Table size 600 x 200 mm Spindle taper for collets ISO 30 Spindle speeds 80-2'200 rpm Misc.accessories MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 1990, HEIDENHAIN TNC-355 Working travels 850x500x450mm Table size 1250x500mm Spindle taper 50 Spindle speeds 35,5-1800 rpm Misc.accessories Dodpfxofg Ep Do Aa Njcg MARCELS MASCHINEN CH

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Features and technical data: - Automatic spindle height and tilt adjustment with decimal increments - Mechanical display for spindle height and electronic display for spindle tilt - Tilting hood with aluminum guides - Adjustable table opening via table slides - System for quick tool change - With long tables featuring extendable workpiece support - Table size: 2500 x 780 mm - Spindle adjustment: -45° to +45° - Spindle diameter: 30 mm - Spindle stroke: 230 mm - Maximum table opening: 300 mm - Motor: 5.5 kW with automatic star-delta start - With forward/reverse rotation - Speeds: 3000/4500/6000/8000/10000 rpm - Electronic programming of spindle height, spindle tilt, and fence position (milling fence) - Extraction ports above and below 120 mm Djdpfow I H Rqsx Aa Nocg Dimensions: 2570 x 1450 mm Weight: approx. 670 kg Availability: short notice Location: Röllbach

Condition: used, Year of construction: 1996, Used machine Year of manufacture: 1996 Equipment and technical specifications: - The basic principle of Hofmann machines is the proven cast iron construction - Gray cast iron is by far the leader in vibration damping, compressive strength, and load capacity - Milling arbor 30 mm with right and left rotation Dcjdewwxzhopfx Aa Nsg - Milling fence with stop jaws, central adjustment, and fine adjustment of one jaw - Manual height adjustment with digital display and zero-reset button - Table size: 1200 x 820 mm - Table height: 890 mm - Motor power: 5.0 / 6.2 kW - Spindle speeds: 3000/4000/5000/6000/8000/10000 rpm - Height adjustment: 125 mm - Chip extraction ports: 110/120 mm - With Holz Her 2-roller feed unit Weight: 850 kg Availability: by arrangement Location: 63934 Röllbach

Condition: used, Year of construction: 1997, Technical details: spindle diameter: 180 mm x-travel: 6.000 mm Dsdpsru Rfhjfx Aa Njcg y-travel: 2.900 mm total power requirement: 95 kW weight of the machine ca.: 130 mit Zubehör t z-travel: 1.250 Ram mm w-axis: 1000 Spindel mm ram stroke: 1250 mm dimension of the ram: 450 x 450 mm bore spindle stroke: 1000 mm bore spindle turning speed range: 920 1/min powered rotary table: IOS 40 CNC 2 Achsen B u.V Rotary-table: 3000 x 3500 mm Rotary-table: CNC-IOS 40 NC mm stepless adjustable, relative to diameter: Index 4x 90° -360000 Winkel =0,001 Grad mm travel - cross: Längs 1230 mm table load of rotary table max.: 40 Tonnen clamping plate: 3 x 8000 x 2000 mm CNC Ram-Type Floor Boring and Milling machine, dismantled and stored The headstock sliding guides were recoated and scraped. *