Used Fermentative Room for sale (996)

Year of construction: 2025, condition: new, functionality: fully functional, The Blasting room (also called a sandblasting room or shot blasting room) is an enclosed area designed for cleaning, roughening, or surface preparation of materials such as metal, concrete, stone, or wood. Inside the room, abrasive materials (like quartz sand, steel grit, aluminum oxide, or glass beads) are propelled at high speed using compressed air to remove rust, paint, scale, or dirt from the surface and achieve the desired roughness. Main Components of a Sandblasting Room Blasting Chamber / Room: A steel-structured enclosure with wear-resistant lining to protect the interior walls. Blasting Machine (Nozzle System): Mixes compressed air and abrasive media, then directs it toward the workpiece. Dust Collection System (Filter Unit): Removes airborne dust and maintains clean air inside the room. Abrasive Recovery System: Collects used abrasive material, cleans it, and recycles it for reuse. Operator Equipment: The operator wears protective gear, including a helmet with air supply, gloves, and a blast suit. CODE DIMENSIONS OF SANDBLASTING AREA (L x W x H) mm KO - 1 4.000 x 4.000 x 3.000 KO - 2 6.000 x 3.000 x 3.000 KO - 3 6.000 x 5.000 x 5.000 KO - 4 10.000 x 5.000 x 5.000 KO - 5 12.000 x 5.000 x 4.000 Dksdpjxr Am Usfx Akgsn KO - 6 15.000 x 5.000 x 5.000 KO - SPECIAL 27.000 x 18.000 x 9.000

Condition: used, Year of construction: 1982, x-travel 300 mm y-travel 160 mm z-travel 340 mm feeds -stepless- 5-500 mm/min Dkjdpfovvnfuex Akgjn rapid traverse 1200 mm/min spindle turning speed range 40 - 2000 U/min tool taper Normkegel 40 table length 600 mm table width 120 mm voltage 380 V frequency 50 Hz rated current 13 A weight of the machine ca. 0,750 t dimensions of the machine ca. 1,8 x 1,5 x 1,8 m DESCRIPTION Machine incl: active three-axis digital readout HEIDENHAIN documentation various tool holders Machine vice etc.

Condition: used, Year of construction: 1995, Technical details: Dkjdpfx Asw D Hhpjkgjn x-travel: 600 mm y-travel: 500 mm z-travel: 450 mm weight of the machine ca.: 3,5 t

Condition: excellent (used), Complete steam boiler house for sale, including all items shown in the photos. The boiler house is still in operation and is being replaced due to increased plant requirements. Parameters can be seen on the nameplate – two Viessmann boilers, condensate tanks, pumps, valves, pipes, and storage tanks. The boiler house comes with full up-to-date technical documentation, including UDT certification, and can operate on natural gas, heating oil, or LPG (propane-butane). Djdpfx Asyurqcjkgjkn

Condition: good (used), Year of construction: 2001, Heidenhain TNC 310 cnc control electronical hand wheel coolant device Technische Daten: Längsweg (X-Achse) / X-travel longitudinal 600 mm Querweg (Y-Achse) / Y-travel cross 400 mm Senkrechtweg (Z-Achse) / Z-travel vertical 400 mm Werkzeugaufnahme / spindle taper SK 40 Drehzahlbereich / spindle speed range 60-5000 UpM Vorschub / feed 0-2000 mm/min. Dkodpfsit Tr Tox Akgjn Eilgang längs + quer / rapid feed x/y 5 m/min. Eilgang senkrecht / rapid feed z 4 m/min. Antriebsleistung gesamt / drice capacity 7 kW Gewicht ca. / weight ca. 2000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Year of construction: 1997, functionality: fully functional, feed length X-axis: 450 mm, feed length Y-axis: 300 mm, feed length Z-axis: 350 mm, 3-axes digital read out horizontal and vertical milling spindle quill Technische Daten / technical details: Längsweg X / X-travel longitudinal 450 mm Querweg Y / Y-travel cross 300 mm Senkrechtweg Z / Z-travel vertical 350 mm Tischgröße / table size 800x400 mm Dksdpfxewyit Hs Akgsn Spindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 50-2500 UpM /rpm Vorschubbereich / feed range 8-400 mm/min. Antriebsleistung / power capacity 3,2 kW Gewicht der Maschine / weight 1500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, -Dimensions: 660x880x2305 mm Dsdpfx Ajwxvvfekgjkn -Plates: 400x600 mm -Year: 2008 -Temperature: 43°C -Refrigerant: R404A -Refrigerant mass: 0.33 kg -Power: 0.90 kW -Voltage: 220–240 V

Condition: used, -Controlled fermentation chamber: -Dimensions: 1150x3750x2225 mm -External chamber width: 1,150 mm -External chamber depth: 3,750 mm -Type of fermentation chamber: BFC -Trolley dimensions: 600 x 800 (overall 670x825) -Number of trolleys: 4 -Usable chamber depth: 3,600 mm -Usable cell width: 1,000 mm -Door frame type: Single door 1,000 mm -Evaporator side: Left -Control panel: OPTICOM -Electrical connection BFC: P6: 400-440V / 3PH + N + PE / 50-60Hz -Tunnel-type chamber: No Djdsyman Tspfx Akgokn -Year of manufacture: 12/2014 -Refurbished equipment: Equipment is prepared upon order. Lead and return times are agreed at that moment (please request the price after refurbishment). -Automatic fermentation cycle management Hnedcvxtveyman Tjbsk -Temperature management -Manual and automatic mode -30 programmable cycles -Automatic end-of-cycle date management -Fault management -Smooth keyboard, scratch-resistant finish.

Condition: used, -Dimensions: 635x1200x2250 mm -Serial number: 2001/1558B -Number of plates: 24 -Year: 2001 -Power: 1.1 kW -Voltage: 230 V Dedpswxvunofx Akgekn Noy Tdxowxvunsugjda -Frequency: 50 Hz

Condition: used, -External dimensions: 2600x2900x2110mm -Internal dimensions: 2400x2700x1950mm -Wall thickness: 80 mm -Temperature: -2+8 ºC / -18-23 ºC -Refrigerant: R452A Djdpfjx Eyhfsx Akgekn -Climate class: 5 -Pre-assembled refrigeration unit on the panel -Automatic condensate water evaporation -Internal lighting -Panel finish in pre-painted sheet metal, specially designed for food use, light grey colour -300mm gaps with panels of 300, 600, 900 and 1200mm -Panel interlocking system with double-latch hooks -Rounded doors and interior corners cut at 45º -Ergonomic handle with lock and safety release system -Pressure balance valve -Stainless steel floor with non-slip surface -Reversible door, self-locking at 90º, available in 2 sizes, with clear opening of 600 and 700mm -Hinges with sloped system -Insulation in CFC-free polyurethane, high-pressure injected, with density 41 Kg/m³

Condition: new, -Model FCX-20 BASIC 50 HZ 60X40 Dedpfx Aew Rwanskgjkn -External dimensions (W x D x H): 2187x1027x600 mm -Tray separation: 78.5 mm -Capacity: 20 (60x40) -Refrigerant: R-134a -Power: 1.8 kW -Frequency: 50 Hz - 9 A -Voltage: 230 V -Weight: 289 kg -This equipment is highly useful in pastry shops, bakeries, as well as in bake-off outlets or hot points. -It is truly indispensable for streamlining operations and providing clients with freshly baked products directly from the oven. -Completely manufactured in stainless steel, designed for pastry, bakery, and viennoiserie products, etc. (fresh or frozen) -Controlled fermentation: -In addition to the advantages of controlled fermentation, there is also the STOP fermentation function, which allows you to delay the baking time up to three hours after the preset program time. -Based on a microprocessor, 24-hour programming can be easily preset. Njy Tdxuew Rwanogjda -Designed to operate from -3 °C to +40 °C and humidity up to 90%. The listing was translated automatically. Translation errors are possible.

Year of construction: 1981, condition: good (used), Lid FP1 2-axis active milling machine with Heidenhain digital display, angular table. SK 40 spindle holder. Good working condition. Machine ready for demonstration under power by arrangement. Dodpfx Ajhg Embjkgekn

Year of construction: 1991, condition: good (used), Hermle UWF 802 M tool room milling machine with Hermle HS track control. Machine is in good working condition, under current demonstration ready. Djdpfsdubmkox Akgskn

Condition: good (used), Year of construction: 1975, Cover FP3L with.3-axis Heidenhain digital readout , rigid table , vertical milling head , SK 40 S20x2 spindle mount . Good working condition. Ready for demonstration under power by arrangement. Dodpfsuclbzsx Akgokn

Year of construction: 1990, condition: excellent (used), Mikron WF2S tool milling machine with 3-axis Elesta-Visulesta digital display. Rigid angle table , SK 40 spindle mount. Very good working condition , from institute. Machine ready for demonstration under power by arrangement. Dkedpfx Aksg Nw Rzjgsn

Year of construction: 1987, condition: good (used), Mikron WF2SA tool milling machine with 3-axis Heidenhain active digital readout. Fixed angle table, SK 40 spindle holder. Ready for operation . Machine ready for demonstration under power by arrangement. Dodpfx Aksqttt Tegjkn

Year of construction: 1975, condition: good (used), Cover FP3L with.adjustable angle table , vertical milling head,SK 40 S20x2 spindle mount . Good working condition. After consultation under power ready for demonstration. Dkedpfx Ajildwxskgjn

Condition: good (used), Year of construction: 1980, Deckel FP1 Active milling machine with 3 axes, Heidenhain digital display, and angle table. SK 40 spindle mount. Good working condition, ready for demonstration under power upon request. Dkedpfswg S I Tox Akgon

Year of construction: 1974, condition: like new (used), As good as new Deckel FP1 tool milling machine overhauled by FPS with 3-axis Heidenhain digital readout , Adjustable angle table , SK 40 spindle mount. Spindle brake , accessories : Counter holder , various collets. Very good working condition, can be demonstrated under power by arrangement. Dkodsq A Icqspfx Akgsn

Year of construction: 1978, condition: excellent (used), Macmon M 100 D tool milling machine with 3-axis Fagor digital display from training department , rigid table , SK 40 spindle mounting. Accessories : div. collets and cutter arbors. Very good working condition , can be demonstrated under power by arrangement. Dkodpfxshtfubs Akgjn

Year of construction: 1997, condition: good (used), Macmon M 100 RE tool milling machine with 3-axis Heidenhain digital display from training department , rigid table , SK 40 spindle mounting. Accessories : Electric spindle guard , div. collets and cutter arbors. Good working condition , can be demonstrated under power by arrangement. Dodpfxshgmmzo Akgekn

Year of construction: 1976, condition: good (used), Deckel FP1 tool milling machine, 3-axis Heidenhain digital readout, machine was overhauled by FPS years ago. Rigid table, SK 40 spindle holder vertical, SK 40 horizontal, accessories: various collets and milling arbors, counter holder, good working condition, paint is no longer so nice, can be demonstrated under power by arrangement. Dkodpfjrhzcusx Akgen

Condition: good (used), Year of construction: 1973, Deckel FP2 tool milling machine with 2-axis Heidenhain digital readout, rigid table, SK 40 spindle holder. Long sliding milling head, accessories: various collets and milling arbors, counter holder. Good working condition, can be demonstrated under power by arrangement. Dodpsumclajfx Akgjkn

Condition: good (used), Year of construction: 1988, Lid FP1 Active with 3-axis Heidenhain digital readout, rigid table, SK 40 S20x2 spindle holder. Good working condition, ready for demonstration under power by arrangement. Dsdpjrk Aaajfx Akgskn

Condition: good (used), Year of construction: 1989, Lid FP1 Active with 3-axis Heidenhain digital readout, rigid table, SK 40 M16 spindle holder. Good working condition, ready for demonstration under power by arrangement. Dsdpetp Nyfefx Akgekn