Used Frame Stitching Machine for sale (70,820)

Year of construction: 2010, operating hours: 196 h, condition: excellent (used), functionality: limited functionality, bending cheek thickness: 100 mm, additional equipment features: Separate Bending Arm Available, bending radius (min.): 700 mm, The Machine is VERY Sparingly used, Exactly used for bending 196 Bends. Available in Dismantled Condition in Southern Part Of INDIA, for a Very Attractive Price . Iijdpfx Aezc Uu Hjk Aef

Condition: new, Year of construction: 2024, functionality: fully functional, Brand new machine never used, selling at very low price. Iisdjwcfvpspfx Ak Aef

Condition: new, functionality: fully functional, Year of construction: 2026, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Nanjing Estun, controller model: E21S, working width: 3,200 mm, cutting angle (min.): 0.5 °, stroke rate (min.): 15 1/min, stroke rate (max.): 15 1/min, sheet thickness (max.): 8 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 4 mm, table height: 850 mm, back gauge adjustment: motor-driven, back gauge: 600 mm, back gauge speed R-axis: 40 mm/s, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, control voltage: 400 V, oil tank capacity: 220 l, overall weight: 7,000 kg, total length: 3,950 mm, total width: 1,700 mm, total height: 2,150 mm, number of support arms: 3, warranty duration: 24 months, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, QC11K-8/3200 Guillotine shearing machine The frame adopts an all-steel welded structure, boasting sufficient strength and rigidity. Internal stresses are eliminated through normalizing and high-frequency vibration treatment to ensure the overall precision of the machine body. German large-scale floor-type boring and milling machines are employed for precision machining using a one-time processing method, guaranteeing exceptional machining accuracy. It features a hydraulic swing-type structure with an upper tool rest return device powered by nitrogen cylinders, enabling fast return speeds. The hydraulic system utilizes an integrated logic circuit controlled by sequence valves, ensuring stable operation, low noise, and straightforward maintenance. Tool rest movement is regulated by hydraulic valves for precise control. Iiodpfx Akey Uquhj Aof The material pressing device incorporates an integrated circuit and independent parallel clamping cylinders. When dealing with uneven sheet metal, the cylinders can expand and contract freely to securely clamp the material. The clamping force is adjustable according to the sheet material and thickness, preventing any damage to the sheet surface. Motorized adjustment allows for quick setting of the blade gap, offering simple operation to adapt to shearing requirements of different sheet thicknesses and materials. Control is achieved through a numerical control (NC) system, enabling fixed-stroke shearing operations. An optical line alignment device facilitates scribed line shearing for enhanced accuracy. The electrical control system is centralized and reliable, with the following key features: All power facilities are installed within the machine body, operated and controlled via buttons on the control panel. A foot switch is provided for direct and convenient operation of the shearing action. Core electrical components are sourced from Schneider for guaranteed quality and reliability. Circuit breakers are installed to protect the control circuit against short circuits. Motor thermal-magnetic circuit breakers provide protection against motor overload and short circuits. The hydraulic system is designed for safety and reliability: The hydraulic system manifold block is equipped with a direct-acting safety relief valve to ensure accurate pressure adjustment. A pipeline check valve is specially installed at the pump head to protect the oil pump from hydraulic shock. Both upper and lower blades are made of high-quality materials and undergo full heat treatment, ensuring sufficient hardness and a long service life. The ball-rolling worktable and front material supporting device facilitate easy feeding while preventing scratches on workpieces during operation. The CNC back gauge device is equipped with high-performance servo motors, drives, precision ball screws, and linear guides, achieving a positioning accuracy of ≤±0.1mm. For the CNC electrical system:The back gauge is controlled by the E21S simple CNC system. Users can directly input the desired values, and the back gauge automatically moves to the specified position upon confirmation. Transmission is achieved through a motor-driven precision lead screw and nut assembly, with digital display via a counter. Fine-tuning for free size correction is not configured to ensure shearing precision, with an error of ≤0.2mm per meter. Three front support arms are fixed on the worktable, providing convenient placement for shearing materials.

Year of construction: 2011, condition: used, Empty weight: 15.800 kg Dimensions (LxBxH): 707 x 385 x 245 cm Serial number: DAAO-01061 Type: automatic die-cutting and creasing machine with stripping unit - very low useage Maximum size: 750 × 1,050 mm (B1 size) Minimum size: approximately 350 × 400 mm Speed: up to approximately 7,500 sheets/hour Die-cutting force: up to 300 metric tons (3.0 MN) Material: paper starting at approx. 80 g/m² Solid board up to approx. 1,400 g/m² Corrugated board up to approx. 4 mm thick Quicklock frames for stripping Length: 7,070 mm Width: 3,850 mm, including walkway Height: 2,450 mm Weight: approximately 15,800 kg Required floor space: approximately 47 m² Online auction of high-quality printing, finishing, bookbinding, and paper-processing machinery from a modern graphic arts production environment, including a HEIDELBERG Varimatrix 105 CS automatic die-cutting and embossing machine, a HEIDELBERG Speedmaster SM 52-5 Anicolor 5-color offset press, a BOBST BRAUSSE Bora 1050 E die-cutting machine with stripping function, 2 HEIDELBERG Stitchmaster ST450 professional brochure production lines, a HORIZON StitchLiner 6000 fully automatic saddle-stitching line, HEIDELBERG Stahl TH 66 / TH 82 and XT 94 folding machines, a MÜLLER MARTINI Bolero automated high-speed line for collating and perfect binding with PUR and hot melt, POLAR 137 XT PACE and POLAR 137 XT AT XT Plus Autotrim fully automatic cutting lines, POLAR 115 XT and 92 ED cutting machines, AGFA Avalon CTP plate setters, MÜLLER MARTINI 1571 automated collator, PALAMIDES Delta 703 bundling and strapping machines, NEOPOST DS600i inserter, the EPSON Super Color T5200 large-format printer, the TECNOMAC Evolution 76 B1 laminator, the HEIDELBERG GTO 52 with Alcolor, various HEIDELBERG sheetfed presses, stack lifts, accessories, and graphic peripherals, etc. The online auction opens Friday 14 August and closes Thursday 17 September. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing days are on: - Thursday 3 September - Thursday 10 September - Monday 14 September Isdpfx Ajzuw Hzsk Ajif Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, Year of construction: 2019, operating hours: 692 h, travel distance X-axis: 4,500 mm, Third-generation CMA drilling center for steel profiles and structural parts, built 2019 with only approx. 692 operating hours. OMRON touchscreen CNC with dialog and DIN/ISO programming, 4,500 mm X-travel, BT40 spindle 50-4,000 rpm (13.1 kW, up to 125 Nm) for solid drilling up to dia. 36 mm and tapping up to M24 in steel. Pendulum operation for loading during machining, 10-position tool changer, Z-Reader height probing and coolant through spindle. Fully functional. Iodpjzmyzfjfx Ak Aoif

Condition: excellent (used), Year of construction: 2011, XYZ Proturn SLX 1630 ProtoTRAK CNC Gap Bed Centre Lathe Ex Research machine – Superb Condition ProtoTRAK SLX Control (2011) Max’ Distance Between Centres 760mm Max’ Swing over Cross-slide 218mm Max Swing over Bed 400mm Spindle Bore 52mm Spindle Speeds 150 – 2500 rev/min Spindle Motor 5.75Kw Spindle Camlock D1-6 Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 60mm Tailstock Travel 127mm Manufactured | 2011 Weight 1560Kgs Supplied with: Two-axis CNC, Two-axis DRO. TRAKing, Constant surface speed. Electronic hand-wheels for X & Z Axes. Joystick for feed & rapids. Interlocked chuck guard and main guard. Iijdpfx Aszav D Dek Asf Quick change toolpost with holders. 3 Jaw chuck 5C Collet Chuck Coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78211 Machine Serial Number: 16P99080-063 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning length: 1,750 mm, spindle bore: 104 mm, spindle speed (max.): 1,800 rpm, type of input current: three-phase, Model:Prototurn 555 Swing Over Bed:560mm Distance Between Centres:1750mm Iiedpfxjzrnkro Ak Aof Control: Prototrak SLX Spindle Speeds: To 1800 RPM Spindle Bore:104mm With: 300mm 3 Jaw Chuck Fixed Roller Steady Quick Change Toolpost Toolpost Holders Dimensions: 3940 x 2250 x 1910mm high Weight: 4100 Kgs

Condition: used, Year of construction: 2017, Used 2014 XYZ SMX 5000 CNC / Manual Bed Milling Machine. Supplied with ProtoTRAK SMX Control, Electronic Handwheels, TRAKing & DXF File Reader, Power Drawbar, Fully Programmable Spindle Drive and Custom-Made Splash Guards. SPECIFICATION: TRAVELS: X Axis: 1,524 mm Y Axis: 596 mm Z Axis: 540 mm Maximum Daylight Under Spindle: 610 mm Quill Travel: 140 mm TABLE: Length: 1,930 mm Width: 356 mm T-Slot Width: 15.9 mm Maximum Table Load: 850 kg SPINDLE: Motor Power: 5.75 kW (7.5 HP) Speed Range: 40 - 5,000 rpm Taper: ISO 40 Quill Diameter: 116 mm Programmable Spindle Drive HEAD: Head Tilt Left: 45° Iodpfxezgwq Do Ak Aoif Head Tilt Right: 45° CONTROL: ProtoTRAK SMX Conversational CNC Control Electronic Handwheels TRAKing Function EQUIPMENT: Power Drawbar Splash Guards GENERAL: Machine Weight: 3,100 kg

Year of construction: 1961, condition: ready for operation (used), A hydraulic single-column C-frame press Müller is available. Press force: 63t, stroke: 560mm, throat depth: 325mm, installation height: 700mm, table dimensions X/Y: 640mm/640mm, ram surface: 560mm/560mm, machine dimensions X/Y/Z: approx. 2000mm/1200mm/3100mm, weight: approx. 7500kg. The machine has a motor malfunction. An on-site inspection is possible. Isdpfx Aey Rtg Eek Asif

Condition: good (used), EKH-455 Shrink Wrapping machine Machine ready to use. Photos show the actual product. Description: The main advantages of shrink wrappers include simultaneous sealing and shrinking, small dimensions, and easy portability. They are an ideal solution for shops, bakeries, warehouses, archives, bookstores, etc. They offer adjustable sealing time and heater temperature, and can also shrink PVC and polyolefin films. Technical Specifications: Power Supply: 230 V Power: 3.77 kW Maximum Product Dimensions: 520 x 390 x 250 mm Sealer Dimensions: 550 x 420 mm Iijdpfx Akszur Ado Asf Weight: 125 kg

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Siemens, controller model: PLC, number of rollers: 4, roller (bottom) diameter: 190 mm, roller (top) diameter: 210 mm, side roll diameter: 170 mm, roller diameter: 210 mm, roller length: 2,050 mm, working width: 2,000 mm, roller height adjustment: 700 mm, working height: 700 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 5 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 15 mm, sheet thickness copper (max.): 15 mm, overall weight: 5,000 kg, total length: 4,600 mm, total width: 1,400 mm, total height: 1,700 mm, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, number of digital displays: 1, warranty duration: 24 months, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, W12-8X2000 Four-roller Plate Rolling Machine This machine is equipped with plate end pre-bending and CNC rolling functions. It allows the metal plate to be fed in one single pass, completing pre-bending and roll forming of the workpiece without the need for turning over the plate. The upper working roller serves as the main drive roller, while the lower roller and two side rollers are hydraulically driven. Their lifting strokes are controlled by the CNC system, enabling automatic leveling with a synchronous display accuracy of ±0.1 mm. The tilting and resetting of the tilting bearing housing adopts a hydraulic transmission structure, and the upper roller is equipped with a balancing mechanism to facilitate the removal of the finished workpiece. The machine comes with a movable independent control console for flexible repositioning at any time, and is equipped with safety interlock devices to ensure safe and reliable operation. Working Roll Material The working rolls are made of 42CrMo high-strength premium alloy steel, manufactured through forging, rough machining, and quenching & tempering heat treatment, achieving a bulk hardness of HB 240–300. After finish machining, they undergo medium-frequency induction hardening, resulting in a surface hardness of HRC 47–58. The products comply with the JB/ZG4289-86 standard for roll steel, ensuring uniform roll rigidity with a controlled deflection of (1/700–1/1000)L. Note: L refers to the center distance between the two side frames. The entire production process strictly follows the standard manufacturing flow for rolls, fully guaranteeing the comprehensive mechanical properties of the working rolls. Working Roll Rotation & Drive System The upper roll is the driving roll of the four-roller rolling machine. It is fitted with an independent hydraulic motor directly coupled to the heavy-duty gear housing, with no intermediate gear transmission. This is the most energy-efficient drive design. The hydraulic motor is equipped with an instant braking device, enabling accurate positioning of the roll shaft during pre-bending operations. Iijdjy Ugtaepfx Ak Ajf Double-row spherical roller bearing Excellent Self-aligning Performance The outer ring adopts a spherical structure, allowing the inner ring and roller assembly to deflect within an angle of 1.5°~3°. It can automatically compensate for misalignment caused by installation errors and shaft deflection, preventing seizure and abnormal wear. Heavy Load & Impact Resistance Line contact between rollers and raceways enables the bearing to withstand extremely high radial loads as well as bidirectional axial loads, perfectly suited for heavy-duty working conditions of rolling machine rolls. High Durability Made of high-strength bearing steel with quenching and other heat treatments. Combined with a well-designed lubrication system, it ensures long-term stable operation under harsh conditions and greatly reduces downtime for maintenance.

Condition: good (used), Renz Autobind AB 500 HS + KAS-300 Semi-Automatic Spiral Binding Machine Machine in very good condition, ready to operate. Made in Germany. Efficient semi-automatic machine for the production of calendars, notebooks, and other metal spiral-bound products. Fast operation Spiral diameters range from 3/16″ to 1 1/8″ Working width up to 500 mm Iodpfx Akozur Efo Aeif Crimping thickness approx. 23 mm Cycle capacity up to 2000 cycles/hour The semi-automatic machine unwinds the spiral from the spool, counts the stitches, cuts the spiral to the pre-set stitch count, and transfers the spiral section to the crimping area. The operator places the pre-perforated calendar on the table. The calendar is automatically transferred to the crimping area by pressing the pedal. The machine then automatically deposits the entire binding onto the outfeed conveyor. The machine includes a Renz KAS-300 hanger feeder, a CB-120HS outfeed conveyor, tools, and documentation. Power supply: 230V + compressed air. Weight: 250kg.

Year of construction: 1995, condition: ready for operation (used), High speed model with SPLIT ROLL high low pile patterning device, working width: 5180mm, needle gauge: 1/8 inch, 1632 (2x 816). Equipment: adjustable needle stroke eccentric and needle stroke adjustment lever with counterweights, prepared in side drive frames, easily accessible at working height, pile height adjustment range 5-16mm, table height adjustment (machine bed) with hydraulically controlled table lock via ENCORE PC memory programmable controller, looper stroke and knife stroke eccentrics with counterweights, 2 needle bars with individual needles, 2 looper bars with Cut Loop individual loopers, 2 knife bars with Tuftco knife blocks, 8 knives per block, individually replaceable, reed plates for front and rear needle bar, ENCORE PC memory programmable controller for controlled stitch density and controlled backing tension, main shaft designed as a hollow shaft with integrated pump controlled pressurized oil circulation lubrication or spray lubrication to each needle drive connecting rod bearing and main shaft bearing in the side drive frames, 2 PC memory programmable HYDRASHIFT DRIVES for smooth needle bar shift, 12 shift steps each to the right/left per needle bar, high speed version with linear slide bearings in the needle bar suspension, pneumatic disc brakes on the main shaft, main shaft rotation via ratchet indexing gear, variable main drive (2x15HP) with frequency inverter, Siemens memory programmable controller with fully wired control cabinet, mounted externally on the control cabinet door. An on-site inspection is possible. Iiedpfezcfhdox Ak Aof

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. Iiedpfxoxghngo Ak Asf These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. You can get machine with protective cover or without it as per your request preferences. Specifications Material width (mm) 416 The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: excellent (used), Year of construction: 2012, XYZ SMX 4000 ProtoTRAK CNC Bed Milling Machine ProtoTRAK SMX Control Year of Manufacture 2012 Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Table: 1474 x 355mm Max load 850kgs Travel: X – 1,060mm Y – 596mm Z – 520mm Dims without travels: W - 2370mm D – 2485mm H – 2660mm Weight - 3100Kgs Isdpfsyzf Naox Ak Aoif For Sale with Jet Machinery Ltd Jet Machinery Stock No: #79167 Machine Serial Number: 10836 Cost: £22,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2022, functionality: fully functional, film width: 300 mm, product width (max.): 300 mm, product length (min.): 100 mm, product width (min.): 80 mm, product length (max.): 500 mm, Equipment: documentation/manual, We offer this used PACKMAT Type S-300 bag sealing machine, manufactured in 2022. Plant No.: 750-0-0426 Year of manufacture: 09/2022 Bag packaging system for PE, PP, VCI, and Tyvek tube films up to 300 mm in width. It manufactures, prints, fills, and seals bags in a single process, with integrated thermal transfer printing. Features: ✓ Manufacturing, printing, filling, and sealing in a single process ✓ Siemens S7 PLC with touch panel, counter functions, maintenance, and setup menu ✓ Impulse sealing system with temperature control, over-temperature protection, heating wire breakage monitoring, and cutting knife ✓ Robust construction: aluminum profile frame, closed housing, integrated work table ✓ Complete technical documentation and CE declaration of conformity Performance data: 15 bags/minute at a bag length of 300 mm Bag width: 80–300 mm (PE / PP / VCI / Tyvek) Bag length: 100–500 mm, freely adjustable Direct printing: 305 dpi thermal transfer Integrated printer: Toshiba B-SX8T, thermal transfer, 305 dpi, printing width up to 213.3 mm, speed up to 203 mm/s Also included in the scope of delivery: Remaining stock of packaging material – approx. 46 rolls of tube bags and approx. 300 rolls of ribbon. Condition: The machine is in technically perfect working order and shows signs of wear and tear consistent with its age and use. With certain bag materials, occasional restrictions may occur when opening the bags, for which no guarantee is provided. Iodpjzquxgefx Ak Aoif Inspection is possible by prior arrangement. If you have any questions or require further information, please send us a message or call us.

Condition: good (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 122278, type of input current: AC, conveyor belt width: 650 mm, total width: 1,100 mm, total height: 1,900 mm, total length: 1,800 mm, overall weight: 400 kg, input voltage: 240 V, working height: 800 mm, input current: 3 A, compressed air connection: 6 bar, conveyor belt thickness: 2 mm, outer diameter: 450 mm, input frequency: 60 Hz, inner diameter: 200 mm, control voltage: 24 V, year of last overhaul: 2022, space requirement height: 2,100 mm, space requirement length: 2,300 mm, space requirement width: 1,600 mm, MOSCA SoniXs TR-6 Pro Strapping Machine | Year of manufacture 2022 | Good condition For sale is a high-quality automatic strapping machine from the German brand manufacturer MOSCA, model SoniXs TR-6 Pro. The machine dates back to 2022 and is in good used condition. It is ideally suited for professional use in production, shipping, logistics, warehousing and packaging. The MOSCA SoniXs series uses modern ultrasonic sealing technology and is designed for reliable and efficient strapping processes. The original new price was approximately €40,000. Iiodpfeztc S Hex Ak Ajf Technical data according to the nameplate: Manufacturer: MOSCA GmbH Model / Type: SoniXs TR-6 Pro Machine type: Strapping machine Year of manufacture: 2022 Machine number: 1322278 Power supply: 1L + N + PE Frequency: 50–60 Hz Voltage: 100–240 V Current consumption: 3.00–1.25 A Maximum fuse rating: 13 A Frame internal dimensions: 1000 mm x 1000 mm Condition: used, good Condition and inspection The machine shows the usual signs of wear for a used industrial machine. The exact scope of delivery and the optical condition can be seen in the pictures. An inspection and functional test after prior arrangement is expressly desired. Logistics and transport Collection: Preferred. Loading/transport: Loading or organization of transport can be arranged. Price and legal information Price: 16,000 EURO negotiable plus legal VAT. Invoice: You will receive a proper invoice with VAT shown. Terms of sale: Sale exclusively to commercial customers (B2B) with exclusion of any warranty and guarantee. If you are interested or have any questions, please send us a message. We will gladly arrange an inspection appointment.

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 2,300 h, machine/vehicle number: 921R50022874, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser source manufacturer: MAX photonics, laser power: 2,000 W, pipe diameter (max.): 200 mm, pipe length (max.): 6,000 mm, working length: 6,000 mm, travel distance X-axis: 6,500 mm, travel distance Y-axis: 360 mm, feed rate X-axis: 120 m/min, cutting speed: 1,600 mm/min, positioning speed: 120 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.03 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 14,700 kg, total length: 12,500 mm, total width: 4,700 mm, total height: 2,600 mm, tube wall thickness (max.): 6 mm, Equipment: cooling unit, emergency stop, fume extraction, safety light barrier, Laser machine for sale, in very good condition. It has a new laser source that is only a few months old. The machine has few operating hours and has been regularly maintained and is in daily use. It is possible to inspect and test the machine immediately upon arrangement. NOTE: Capable of cutting round, square, rectangular, oval, D-shaped, and U-shaped tubes. Iisdpezg D I Aefx Ak Asf

Condition: excellent (used), Year of construction: 2016, These machines are marketed as 2 opp machines and very good they are too but we consider them to be great little 1st opp machine in its own right. can be demonstrated Remarkable capacity for such a small machine. Machine has 6 tool holders Year: 2016 Control: ProtoTrak TMX Table Size: 457 x 381mm ‘X’ axis Travel: 355mm ‘Y’ axis Travel: 305mm ‘Z’ axis Travel: 455mm Iiodpfx Aeydvzdjk Ajf Spindle Speeds: 50 – 6000 RPM Spindle Taper: BT 30 Tool magazine capacity: 8 station Dimensions w x d x h: 760 x 1220 x 2585mm Weight: 1,100 kg can be demonstrated if required

Condition: like new (used), Year of construction: 2020, functionality: fully functional, For sale is an Oerlikon Nonwoven ecuTEC+ electrostatic charging machine, designed for the electrostatic charging of filter media. The machine is intended for integration into a production line and processes material webs with a width of up to 1,700 mm. The material is guided through the machine by a system of deflection rollers and electrostatically charged using charging bars. The system is equipped with an HMI control panel and can operate in constant-current or constant-voltage mode. The machine has seen very little use and is being offered due to changes in the production setup. Manufacturer: Oerlikon Nonwoven / Oerlikon Neumag Model: ecuTEC+ Year: 2020 Application: electrostatic charging of filter media Maximum material width: 1,700 mm HMI operator panel Adjustable charging system Iodpfx Aozumirsk Ajif Constant-current / constant-voltage operating modes Designed for integration into an industrial production line CE documentation available According to the manufacturer's documentation, the material is guided through the machine via seven deflection rollers and electrostatic charging takes place at four charging positions. The system includes the machine frame with safety guarding, deflection roller/charging section, electrical cabinets with control electronics and high-voltage generators, and touchscreen control panel. Condition: Used, very low operating use. The machine is currently dismantled/disconnected from the production line. Detailed technical documentation is available. A comprehensive PDF specification/manual can be provided to interested buyers upon request. Inspection can be arranged by appointment. Further information, photos and documentation are available on request.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 1711, This industrial multi-blade band sawmill line (multi-head band resaw) is designed for high-volume log and timber resawing. Constructed on a robust steel frame, the machine features a highly efficient 8-head configuration, where each individual cutting unit is powered by its own dedicated electric motor for maximum performance. The machine is equipped with 15 kW motors and operates with standard 38 mm x 5025 mm saw blades. A key technical advantage of this line is its versatility: every other saw head can be tilted up to 30 degrees. This specific function allows the machine to cut diagonal FE (featheredge / weatherboard) boards up to 175 mm in width. Isdozudynepfx Ak Aeif Material feeding is handled by a heavy-duty steel chain conveyor system that ensures stable and precise timber positioning throughout the cutting process. Manufactured in Latvia, the machine is completely ready for continuous professional sawmill operation. It is still connected and can be started.

Condition: used, machine/vehicle number: MC939B03, overall weight: 5,800 kg, input voltage: 400 V, type of input current: three-phase, Vertical Machining Center. Manufacturer: Falcon Machine Tools Co., Ltd. (Chevalier, Taiwan) Model: 2040VMC Serial Number: MC939B03 Type: CNC Vertical Machining Center Machine Weight: 5,800 kg Iedpfxeztba Ns Ak Aeif Maximum Spindle Speed: 8,000 rpm Power Supply: 400 V Required Power: 15 kVA Air Pressure Required: 5 kg/cm²

Condition: good (used), Emil Kahle Letterpress Machine Platen Iijdpjztn R Usfx Ak Asf Manufactured in Germany by Emil Kahle Maschinenfabrik, Leipzig Reudnitz A brilliant-looking exhibit to place in a company lobby. Manually added piston. Foot pedal controlled. Frame with mounted form included. Frame size approx. 365×255 mm.

Condition: used, Year of construction: 2015, XYZ 2-OP Vertical Machining Centre ProtoTRAK TMX Control (2015) Iodpfoya H Nkox Ak Asif Year of Manufacture: 2015 Spindle Speeds to 6,000rpm Spindle Taper BT30 Table Size 457 x 381mm Table Travels 355 x 305 x 455mm (XYZ) 6 Station ATC Rapid Traveres 15m/min Footprint 760 x 1,220 x 2500mm Weight 1100kgs 415V Electrics Air Require for ATC For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79155 Machine Serial Number: SOP02060 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2005, machine/vehicle number: SBLG 0005, Proto Trax VL 3 jaw SMW chuck 11KW Spindle motor 104mm spindle bore Spindle speeds 30-1800RPM 350mm swing over cross slide X axis travel 280mm Z axis travel 1650mm Iedpfezb Ipzjx Ak Aoif 1750 mm between centres Coolant pump and tank