Used Hall Fan for sale (5,896)

Year of construction: 2002, condition: good (used), machine/vehicle number: SIKBK, DEMAG KBK crane sky crane runway dimensions approx. 10x6m Payload / lifting load 500 KG - 0.5 tons Technical data of the system: Crane runway made from Demag KBK2 rails The system is delivered complete: KBK rails, rail connectors, trolleys, end plates, cable carriers, holders/hangers, etc. Bodpfxjmqf Nbo Abzolp incl. Demag DK2 500KG chain hoist Crane is dismantled and available immediately Used condition, see pictures Item location is 75053 Gondelsheim Dispatch by forwarding agent or pick-up only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items! Other KBK systems are also available. Payload 125KG - 1600KG Please inquire about your crane runway with cantilever load and dimensions.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, volume flow: 9,400 m³/h, power: 15 kW (20.39 HP), input frequency: 50 Hz, Three fans are offered; the price is for one fan each. All three fans are identical in design. Bljdpfx Abjxcv Ndezjp

Condition: excellent (used), Offered is a used steel hall: steel, hot-dip galvanized, monopitch roof, trapezoidal sheet and doors. Dimensions: 25.55 m (length) x 5.56 m (width). Height at front: 3.43 m, height at rear: 3.13 m. Roof overhang at rear: 1.30 m. Door dimensions: 3.04 m x 2.49 m. Very good condition. The hall is assembled. Sale without dismantling. Bsdjxcwtqspfx Abzjlp

Condition: ready for operation (used), Centrifugal fan, 25,000 m³/h, used machine Airflow: 25,000 m³/h Bjdpfxow Au Syo Abzelp Inlet diameter: 320 mm Outlet size: 480 × 270 mm

Condition: new, Year of construction: 2022, Fan new, year of manufacture 2022 Motor power 15 kW Volume flow 7783 m³/h Fan position GL 270 Total pressure increase 3502 Pa Connection 350 mm With star/delta starting and volt-free contact for start/stop: with Nestromat 15 kW star/delta control, control cabinet IP54 installed, including main switch. The control cabinet is prepared for the installation of further necessary control components as required by the overall system control; spare slots are available if needed. Technical data: • Three-phase network: 400 V • Maximum drive power: 15.0 kW - Y/Δ connection • Network frequency: 50 Hz • Ambient temperature: -15 to +40 °C Bsdpfxow I U Ttj Abzolp • Control cabinet protection rating: IP 55 or 54 depending on version • Control cabinet: RAL 7032, powder-coated Weight 328 kg Availability: immediately Location: Flörsheim

Year of construction: 1985, condition: used, Fan Nestro Condition see pictures Bodpoiwur Sjfx Abzelp

Condition: new, Year of construction: 2024, Motor power 2 HP Voltage 400V Motor type Three-phase Frequency 50 Hz Rotation speed 2850 rpm Fan size Ø 305 mm Suction connection Ø 180 mm Outlet size Ø 180 mm CFM 1203 Air flow 2044 m3/h Max. static pressure 1742 Pa Dimensions 712x693x690mm Weight 52 kg Direct drive fans are designed for dust. The design has been designed in such a way that access to the motor, impeller and bearings is as simple and quick as possible, which ensures simple installation and subsequent maintenance. The motors of our fans are TEFC type, with CE certificate. Equipped with a strong impeller for maximum efficiency. Blodpjv Dvrxjfx Abzep Ready to use immediately after plugging in.

Condition: new, Year of construction: 2024, functionality: fully functional, input voltage: 400 V, overall weight: 95 kg, Equipment: documentation/manual, type plate available, Extraction capacity of filter unit at spigot*: 2200 m³/h (free-eye) Total power consumption*: 0.62 kW Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 65 db(A) Bsdpfeum Uzasx Abzslp Dimensions L/W/H in mm: L 1623 / W 508 /H 545 Colour: RAL 7035 Weight: 95 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter equipment Special voltage or special colour on request Filter equipment*: - 40 mm aluminium mesh pre-filter (optional/retrofittable: PrePac pre-filter package) - 1 piece electrostatic filter cell - 20 mm knitted aluminium post-filter (optional: 40 mm post-filter range) OPTIONAL: Several pre-filter packages possible The application: Horizontal, electrostatic air cleaner with EC centrifugal fan for separating oil mist, emulsion mist and smoke from the hall air in recirculation mode. Vertical raw air capture via intake manifold with suction nozzle. Clean air recirculation via adjustable diffusion grille. Your advantages of the ELBARON series: - 6 appliance variants available - Directly from the manufacturer - Electronically controlled EC fan as standard - Adjustable speed and air flow rate - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large programme of mounting and connection accessories - Quality made in Germany We have developed the hall extraction system as a cost-effective alternative to expensive centralised extraction systems or complex individual machine extraction systems. This allows you to protect the health of your employees and maintain your factory building without major investment. We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke (oil mist separator). For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter devices on the market and are in use worldwide.

Condition: used, • Type: F 50-16 • Dimensions: approx. depth 1100 x width 1200 mm Bjdpfxow Hcwro Abzelp • Maximum glass size approx. 1650 mm height x 2000 mm length • Load capacity 1500 kg • Max. loading height 1740 mm • Year of manufacture: 2013 2 units available

Condition: used, Centrifugal fan NICOTRA - Gebhard Type P2M-M3M4J-RRB-ATEX RD/0 Fabric No. 318844/626052/1 Year of construction 2008 Volume flow 10000 m³/h = 166 m³/min. Pressure p 1.2 kg/m³ Air inlet Ø 500 mm Air outlet 450 x 450 mm Motor speed 1435 rpm Motor power 4 kW Bjdpfspp D I Sox Abzjlp Mains connection 400 Volt 50 Hz - Fan wheel with 8 fan blades - Directly flanged drive motor - Mounted adapter ring with flexible sleeve Ø 500 mm - Adapter flange for air outlet from rectangular flange 450 x 450 x to Ø 500 mm - Galvanized sheet metal housing Overall height without adapter ring 1100 mm Space requirement L x W x H 1100 x 1000 x 1630 mm Space requirement with pallet L x W x H 1400 x 1070 x 1800 mm Weight of centrifugal fan 200 kg Weight with pallet 230 kg Very good condition

Condition: new, Year of construction: 2024, flue capacity: 175 kW Conventional yeld capacity: 140 kW flue diameter: 200 mm hot air delivery pipes: 3 x 250 mm flue length: 950 mm oven width: 600 mm oven hight: 860 mm air flow: 6300 m³/h power consumption: 8900 W Bsdpfx Abok Utrpezslp aproximate surface to heat up: 2200 m³ area to be heated: 500/600 m² heater height without hot air conveying pipes: 2200 mm heater width: 930 mm heater length: 1700 mm weight: 615 kg

Condition: used, mileage: 2,42,000 km, power: 250 kW (339.91 HP), fuel type: diesel, color: white, axle configuration: 6x2, fuel: diesel, wheelbase: 6,200 mm, brakes: engine braking, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space width: 2,500 mm, loading space length: 7,980 mm, loading space height: 2,500 mm, Year of construction: 2019, Equipment: ABS, air conditioning, cruise control, tail-lift, traction control, Year of manufacture: 2019 Front axle: Steering; Tyre profile left: 100%; Tyre profile right: 100%; Suspension: leaf suspension Rear axle 1: Double wheels; Tyre profile left inner: 25%; Tyre profile left outer: 25%; Tyre profile right outer: 25%; Tyre profile right outer: 25%; Suspension: air suspension Rear axle 2: Steering; Tyre profile left: 30%; Tyre profile right: 30%; Suspension: air suspension Bjdpjxcln Ajfx Abzolp Empty weight: 12.018 kg Carrying capacity: 15.982 kg GVW: 28.000 kg Dimensions (LxW): 998 x 255 cm Tail lift: Zepro, slider lift, 2500 kg

Condition: new, mileage: 241 km, power: 355 kW (482.67 HP), fuel type: diesel, color: white, brakes: retarder, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, FAN XF 480 NGD CRYSTAL WHITE Sleeper High Cab Laminated glass with sun protection film Central locking, 3 keys, 2 remote controls Windshield with sun protection film Rear window: Double glazed Horns, 1 set LED skylights DAF Corner View LED headlights and fog lights Mechanical cab suspension Rear view camera Handle and lamp surround: Black. Side panels: Cab color LED daytime running lights Adjustable short roof spoiler, Sleeper High Cab Black spoiler housing for cab suspension Crystal White CRYSTAL WHITE Lower cab step: Stone Grey Roof hatch with electric controls Integrated parking air conditioner Driver's seat: Luxury Air Passenger seat: Cinema and/or table, fabric upholstery Door panel: Loosely woven fabric Xtra Comfort mattress for lower bunk Upper bunk Safety net on both bunks Refrigerator and drawer Armrests on both sides of the driver's seat Dashboard design: Plateau Accessory power supply: Standard 2x 40 A Bedpfx Ajwg Nphebzslp ECAS remote control with extended functions Parking heater with waste heat pump and timer Wireless charger Digital tachograph, VDO 1C, version G2V2 Antennas: Radio, 2x mobile radio, GNSS. Extra: CB DAF Infotainment Luxury with Exclusive speakers Adaptive Cruise Control with FCW and AEBS-3 Predictive Cruise Control Driver Performance Assistant Lane Departure Warning System Start-Off Assistant DAF Side and Turn Assist Electronic Stability Control (VSC) Speed Limit Detection DAF Drowsiness Detection Compliant with UN regulations R155 and R156 Alcohol interlock, ready Axle load monitoring Front leaf spring suspension: medium Front: 8.00 t, parabolic, 165 N Rear axle 2, 8000 kg, load index 156 Rear axle load capacity 13.00 t Trailing axle load 8.0 t Load limiter 11.5 t Hand-operated lifting device Lifting device Rear: 20.00 t, air suspension, SR1344 Front axle 1, 8,000 kg, load index 156 Rear axle 1, 11,600 kg, load index 145 Front axle(s): 385/65R22.5 Driven rear axle(s): 315/80 R22.5 2nd driven rear/trailing axle: 385/65R22.5 F1,385/65R22.5GO KMAXS2 160/000 K Steering BBA R1,315/80R22.5GO KMAXD2 156/150 L Traction DCA R2,385/65R22.5GO KMAXS2 160/000 K Steering BBA Tire pressure monitoring system ECO performance Rear axle ratio 2.64 Mechanical differential lock Traction assist 15.0 t 12-speed TraXon transmission 12TX2210 DD, 16.69-1.00 MX-13 engine, 355 kW/483 hp Cab emblem: 480 Emission class Euro 6 Maneuvering mode Automated transmission, TraXon, 12 gears Automatic transmission with manual transmission, full version Traction control (ASR) OBD-E Engine H6 Fuel B7 ZF Intarder 2-cylinder compressor without clutch Rear drive axle with disc brakes Pneumatic parking brake control EAS unit right, horizontal, 75 l fuel tank left Longitudinal member 310/7.0 mm, with internal reinforcement front/rear 620 l aluminum fuel tank right, height 620 mm Front underride protection Steel compressed air tank Cross member D137 Rockinger coupling D130 Use with drawbar, type plate, up to max. GVW Pneumatic connection for trailer, swivel coupling Electrical connection for trailer, 24 V/15-pin Plug connection, fixed engine speed control, chassis Hard-wired body signals and warnings ECAS control PTO engine rear, 1 o'clock, control without clutch, pump drive Battery energy monitoring Generator 130 A, batteries 2 x 210 Ah AGM Technically permissible chassis weight max. 27,000 kg Max. gross combination weight, drive system 50,000 kg, class 3 Max. GVW, drawbar/coupling 53,000 kg Additional cab

Year of construction: 1987, condition: excellent (used), machine/vehicle number: Abus 2to MM2, ABUS crane sky crane runway bridge crane indoor crane crane Payload / lifting load 2t - 2000KG, track about 2700mm External dimensions approx. 3100mm Bodoifyhhopfx Abzolp approx BJ 1987 with corridor control Overall height from top edge of crane to hook approx. 900mm Head carrier length without buffer approx. 2200mm Crane is dismantled, stored and immediately available. Very good condition There are also pillar slewing cranes and wall slewing cranes Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by forwarding agency possible, please ask for postal code Collection preferred

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, total width: 25,000 mm, total length: 1,00,000 mm, total height: 12,500 mm, Lightweight hall (steel structure) 25 m wide, 100 m long, and 12 m high; in very good condition with the steel structure ready for immediate assembly; hall is offered complete with tarpaulin and assembly parts; snow load 200 kg/m² and wind load 0.3 KN/m²; loading and delivery can be organized; assembly and tarpaulin installation or a new tarpaulin can be organized. Blsdpfx Ajv Iltajbzop

Condition: used, LED ceiling light TRILUX type Belviso C2 625 CDP LED 3900nw LED semi-recessed luminaire with CDP microprismatic cover. Louvre luminaires, ceiling luminaires, recessed ceiling luminaire Linear luminaire, high bay luminaire, high bay luminaire suitable for Odenwald ceiling System dimensions 625 x 625 mm Output 45 watts Mains connection 230 Volt, 50 Hz Light color neutral white Luminaire luminous flux 4000 lm Color temperature 4000 K - Suitable for ceiling cut-outs 610 mm x 610 mm, installation depth 65 mm - Sturdy luminaire housing made of sheet steel - Glare-free plastic cover with microprismatic CDP surface - All-round, exclusive light framing - Very high-quality workmanship (net new price over EUR 500) Luminaire dimensions Length: 620 mm Width: 620 mm Lamp height: 72 mm Weight: approx. 8.9 kg Very good condition Used but without damage approx. 100 pieces available Price per piece Blodpevbu Awofx Abzjp

Condition: new, Year of construction: 2024, Firing chamber output: 49kW Working power: 45kW New appliance in original packaging: Yes Hot air blower, flue gas blower, electronic control with digital display: included Supply air filter, recirculation air intake filter: large-surface supply air filter without power loss / included Hot air conveying pipes: 2 x 200mm with plug-in freely rotatable 90° bends Smoke outlet diameter: 180mm Firebox length: 660mm Firebox width: 480mm Firebox height: 600mm Air flow : 3500m³/h Supply air filter: Yes, large-surface supply air filter without power losses Bljdpopn Nyzofx Abzop Power consumption: 550W designed for room volume: 1000m³ Weight: 310 kg

Condition: good (used), Radial fan, chip extraction fan, fan, extraction, chip blower, high-performance fan -Engine power: 18.5 kW -Speed: 1460 rpm -Volume flow: 15400 m³/h -Total pressure: 2550 Pa -Connection input: Ø 450 mm -Connection output: 350 x 350 mm -Impeller: Ø 780 x 180 mm -Dimensions: 1040/1190/H1070 mm Bsdpfjw E Nh Usx Abzolp -Weight: 422 kg

Year of construction: 1992, condition: good (used), Industry - Fan / Blower Manufacturer: DSD Air Technology Division (today: Ferrostaal Air Technology GmbH) Type: DRMU 1000 R Year of manufacture: 1992 Volume flow: 35.000 m³/h Pressure: 6.500 Pa Speed min.: 2,035 rpm max. speed: 2.160 rpm Power: 75 kW Air density: 1.1222kg/m³ Temperature max.: 90 °C new price: approx. 35.000,00 € / piece In very good condition! Bsdpfegu Nyisx Abzjlp

Year of construction: 2022, condition: as good as new (ex-display), Air handler with EC technology for hall air conditioning or heating, cooling capacity in combination with a chiller unit: 150 kW at 7/12°C, heating capacity 300 kW, airflow 20,000 m³/h, 4x500 mm air outlets, compact design. Bledofzrgyjpfx Abzsp

Condition: used, Centrifugal fan KASTRUP Fabric No. 27688/1 Year of construction approx. 1985 Blsdpfedz Sqwjx Abzjp Volume flow approx. 4000 m3/h Intake pipe Ø 250 mm Exhaust air connection 400 x 120 mm Motor speed 1440 rpm Motor power 5.5 kW Mains connection 380 Volt, 50 Hz. - Metal housing Space requirement L x W x H 1100 x 900 x 1220 mm Weight approx. 150 kg Good condition

Condition: used, Year of construction: 1979, Intake diameter: 300 mm Discharge diameter: 300 mm Flow rate: 5400 m³/h Motor power: 2.5 kW Blsdpfewm Nrvex Abzsp Weight: 100 kg

Condition: good (used), Year of construction: 1998, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan Bljdpfx Absrp Ii Uszep -Manufacturer: Eurovent, dust extraction fan radial fan type MPR 502 -Motor: AEG 5.5 kW 2860 rpm -Volume flow: 3000 m³/h -Pressure: 3900 Pa -Connection: Inlet Ø 305 mm -Connection: Output 220 x 160 mm -Base plate: 415 x 400 mm -Dimensions: 755/750/H770 mm -Weight: 100 kg

Condition: used, Drive motor, DC servo motor LENZE type GFQUBT 112-22 Spindle motor, electric motor Serial no. 0239398K Year of construction: 1993 Rated power: 6 kW Operating voltage: 400 DC Rated current: 18 amps Maximum speed: 1000 rpm Excitation voltage: 210 VDC Excitation current: 3.4 amps Shaft diameter: 38 mm (shaft with 10 mm feather key) Shaft length: approx. 76 mm (shaft projection from centering edge) Centering flange diameter: 230 mm Bolt circle diameter: 264 mm, 4x 14 mm holes Bodpfx Abeqv I S Sezjlp Longlife speedometer HÜBNER type TDP 0.2 LT-4 Speedometer voltage: 60V / 1000 rpm Speed max. 9000 rpm External fan LENZE type GSD 160 Mains connection: 400 V, 50 Hz. 0.32 kW Overall length: 830 mm (without shaft and centering flange) Overall dimensions L x W x H: 920 x 300 x 460 mm Own weight: 130 kg good condition

Condition: used, Year of construction: 1984, Intake diameter: 160 mm Discharge diameter: 160 mm Flow rate: 2500 m³/h Bedpewm Nr Aefx Abzelp Motor power: 2.2 kW Weight: 50 kg