Used Hebrock Akv 3005 Dk for sale (43)

Condition: good (used), Hebrock top 2000 edge bander glue application by roller pneumatic pre-cut guillotine pressure rollers trimming saw for finishing top and bottom milling unit R1-R2 max. workpiece height: 50 mm max. edge thickness in roll: 3 mm feed speed: 10 m/min Bedpfx Aoy Rpicobtswt machine length: 310 cm The machine is well-maintained and in good condition.

Condition: ready for operation (used), Year of construction: 2024, workpiece height (max.): 60 mm, feed rate X-axis: 10 m/min, spindle speed (max.): 16,000 rpm, control type: PLC-controlled, The machine has already been disassembled and stored by a specialist. TECHNICAL DETAILS Bjdpfozb Idfex Abtowt Rotational speed of the miter saw station: approx. 16,000 rpm Rotational speed of the milling station: approx. 16,000 rpm Maximum milling depth: 3 mm Design for edge thickness: 1 mm Hot melt adhesive specification for edge material max.: 3 mm Feed rate: approx. 10 m/min Maximum workpiece thickness: 60 mm EQUIPMENT Maintenance-free, coated glue basin with provision for interchangeable basins Glue dispensing device Pneumatic milling adjustment Combination design with interchangeable plate cutter Corner rounding milling cutter Radius drawing blade Surface drawing blade with pneumatic extraction device Cleaning station Robust chain drive Ball-bearing mounted double roller pressure pad Aggregate viewing window from the machine's rear and operator side Signal lamp for workpiece sequence Extendable workpiece support ACCESSORIES Hebrock 8 mm version Hebrock quick-change system for corner milling cutter Hebrock jointing up to 60 mm workpiece thickness Hebrock protective spray for edges Hebrock nesting (milling cutter + radius drawing blade) Hebrock Airtronic Note: Accessories are provided without guarantee. The principle applies: "Item purchased as seen." The prospective buyer must verify the completeness of the item on-site.

Condition: used, Year of construction: 2008, power: 5.8 kW (7.89 HP), workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, total height: 1,400 mm, total length: 2,700 mm, total width: 1,000 mm, overall weight: 550 kg, Equipment: CE marking, No. 04542 Edge banding machine HEBROCK Top 2000 Used, year of construction 2008 Max. edge thickness 3 mm Max. workpiece height 50 mm Feed speed approx. 10 m/min Glue pot heating time approx. 5 min Total connected load 5.8 kW Glue application unit with quick-heating glue pot for hot-melt adhesive granules End trimming unit for flush cutting of protruding edge material Combination trimming unit with two motors, 0.37 kW each Four-flute indexable insert cutters for flush, bevel and radius trimming Electronic glue temperature control with digital display Workpiece support with rollers Bjdpfxozrpnlo Abtowt Mobile machine base Transport dimensions approx. 2700 x 1000 x 1400 mm LWH Weight approx. 550 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: good (used), Year of construction: 2003, I sell the radius milling machine HEBROCK HFF08, Year 2003. Suitable for curved shaped edges Good condition, possible to test ! Bsdpswun H Usfx Abtewt Possible to buy also the Radius edge banding machine AKV88D.

Condition: used, Hebrock K34 Edge thickness up to 8 mm PLC screen control with 15" touchscreen Pre-milling unit for application before the gluing section (3mm) Gluing station with interchangeable container and glue dispensing device Edge height max. 60 mm Trimming unit Milling unit for flush trimming/radius/chamfer milling Corner rounding unit for radii/chamfers Multi-radius pull blade (R1/R2) Nesting Surface pull blade Release agent spraying system Year of manufacture 2023, 52 operating hours Machine is in NEW condition and in TOP condition Bjdswtfvkjpfx Abtswt From a carpentry business closure/retirement Available from carpentry

Condition: new, Year of construction: 2026, The machine is on stock!!! Max. edge thickness 3 mm Min./Max. workpiece thickness 8 – 50 mm Min. workpiece length approx. 160 mm Feed speed 10 m/min Bwodjhymgdopfx Abtjt Gluepot heating time approx. 3.5 minutes Power consumption Ø approx. 7.4 kW Electrical connection 400 V/3 phase/50 Hz (Transformed to your voltage) Table height approx. 900 mm Machine dimensions (LxWxH) 4300x1300x1400mm Weight approx. 900 kg Exhaust connection Ø 1 x 140 mm protection spraying edge Pneumatic 3-point-adjustment (radius-, champfer-, flatmilling)

Condition: new, Year of construction: 2026, Pre-milling unit End Trim saw Top and Bottom Trimming unit Corner Rounding Unit Surface Scraper Touch Screen Controller Max. edge thickness: 3mm Min./max. workpiece thickness: 8–50mm Min. workpiece length: approx. 160mm Bwodpoglfwtjfx Abtjt Feed speed: 10 m/min. Ready to operate: approx. 3.5min. Power consumption: ∅ approx. 7.4kW Electrical connection: 400V/3Ph/50Hz Table height: approx. 900mm Machine dimensions: approx. 4,050x1,300x1,400mm (LxWxH) Weight: approx. 820kg Exhaust connection: ∅ 1x140mm Edge Banding Machine with PLC Premilling (DIA-tools incl.) up to max. 2 mm milling depth Corner rounding unit Radiusmilling R=2 mm Radius edge milling R=2 mm radius profile scraper protection spraying edge

Condition: new, Year of construction: 2026, Space-saving with excellent specifications. Your entry point into edgebanding could not be better, as the 3.3m long F2 is both cost-effective and space-saving. And it also has the specifications you require to process perfect edges right from the word go – diamond-tipped cutters guarantee superbly prepared workpieces for edging. The specifications include pre-milling aggregate (up to 3 mm), the top-side fast-heating glue pot, trim saw and combicutter. The F2 can also be optionally fitted with a surface scraper. Get started into perfect edgebanding! Max. edge thickness: 3mm Min./max. workpiece thickness: 8–50mm Min. workpiece length: approx. 160mm Feed speed: 10 m/min. Ready to operate: approx. 3.5 min. Power consumption: ∅ approx. 5.9 kW Electrical connection: 400 V/3Ph/50Hz Bwjdpfx Absglfw Netst Table height: approx. 900 mm Machine dimensions: approx. 3,350 x 1,300 x 1,400 mm (LxWxH) Weight: approx. 620 kg Exhaust connection: ∅ 1x140 mm Surface scraper (incl. pneumatic disengagement)

Condition: new, 3 mm Bwjdpfx Asvwd Uuobtet Total length 4122 mm Feed speed 10 m/min. with PLC control (incl. touchscreen) and hot-melt adhesive application to the workpiece foredgebanding material up to 3 mmjointing cutter (incl. DIA tool) up to 2 mm cutter depth1),maintenance-free glue tray with change tray pre-equipment incl. adhesive discharge device,HF cross-cut saw station (approx. 12,000 rpm),HF trimming station (approx. 12,000 rpm) with separate pneumatic trimming adjustment andchange plate trimmer (combined version),corner rounding cutter,surface scraper (incl. pneumatic discharge device) with separate pneumatic trimming adjustment andchange plate trimmer (combined version),corner rounding cutter) with separate pneumatic routing adjustment andinterchangeable plate router (combi version),corner rounding router,surface scraper (incl. pneumatic lift-out),free space (for cleaning station or radius scraper),robust chain drive,ball bearing mounted double roller top pressure,viewing window from rear of machine,pull-out workpiece support,feed rate approx. 10 m/. No. F4/00/11- Joining head WhispercutF4/500/10- Combination milling headF4/500/20- Radius milling cutter R=2mmF4/500/2- Radius corner milling cutter R=2mmF4/08/2- Quick-change equipment for corner milling cutterF4/08/4- Radius scraper (incl. F4/09- Radius radius scraper R=2mmF4/09/2- ChassisF4/10- Pneumatic 3-point adjustment(radius, chamfer, flush milling)F4/30

Condition: new, Year of construction: 2025, The Hebrock F 2 Bwjdpfx Ajlht Hzjbtot The 3.3 m long F 2 is not only attractively priced and space-saving. It also features the equipment you need to process edges perfectly from the start: diamond-tipped joining cutters guarantee excellently prepared workpieces for edge banding. The equipment includes a joining unit (up to 2 mm cutting depth), the top-mounted quick-heating glue tank, a mitre saw, and a combination milling machine. Optionally, the F 2 can also be equipped with a surface scraper blade. Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: F2 - 10 m/min Edge banding machine F2 next With PLC control (including touchscreen) and hot melt glue application to the workpiece for edge material up to 3 mm; joining cutter (including diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with interchangeable tank provision including glue outlet device, HF mitre saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable plate milling cutter (combination version), robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, pull-out workpiece support, feed rate approx. 10 m/min. F2/10 carriage F2/30 pneumatic 3-point adjustment (radius, bevel, flush milling)

Condition: good (used), Year of construction: 2005, Brand: Hebrock Model: HFF 08 Machine no: 08/379 Year model: 2005 Edge cutter for simultaneous upper and lower radius/clean milling of excess edging material on workpieces with straight edges and on rounded workpieces with internal and outside radii. Tech data: Max edging thickness: approx. 3mm Max workpiece height: 50mm Inner radius min: 40mm Milling motor: 12000 Rpm Work table height: 865mm Max 6 bar Bodpfoq H Spvox Abtewt Chipboard: 120mm Milling motor: 0.37Kw Motor: 1.5Kw, 50Hz, 400V 3-phase Stock no: 2001922

Condition: new, Year of construction: 2026, Max. edge thickness 3 mm (optionally up to 8 mm) Min/Max. work piece thickness 8–60 mm* Min. workpiece length approx. 200 mm* Min. workpiece width approx. 80 mm* Feed speed approx. 10 m/min. Ready to operate approx. 6 min. Power consumption max. approx. 14 kW Electrical connection 400 V – 3 Ph – 50 Hz Machine dimensions 5,250 x 1,230 x 1,430 mm (LxWxH) Weight approx. 1,700 kg pre-milling head Whispercut radius for corner rounder R = 2mm heatable infeed fence quick change device f.motor corner rounder Bwjdpeg Tu Rksfx Abtet change motor for corner rounding unit including HM profile cutter radius for change motor R = 1mm Radius Multi-Radiusscraper R2/R1 wheels release agent spraying unit cleaning agent spraying unit protection spraying edge nesting pneumatic 3-point adjustment

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only affordable and space-saving, but it also boasts the features you need to process edges perfectly from the start: diamond-tipped joiner cutters guarantee excellently prepared workpieces for edgebanding. The equipment includes a joiner unit (up to 2 mm cutting depth), the top-mounted quick-heating glue container, a miter saw, and a combination router. Optionally, the F 2 can also be equipped with a surface scraping blade. Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: F2 - 10 m/min Edgebanding machine F2 next With PLC control (including touchscreen) and hot-melt glue application to the workpiece for edge material up to 3 mm; joiner cutter (including diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with replaceable tank preparation including glue dispensing device, high-frequency miter saw station (approx. 12,000 rpm), high-frequency router station (approx. 12,000 rpm) with separate pneumatic router adjustment and interchangeable blade router (combination design), robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, pull-out workpiece support, feed rate approx. 10 m/min. Bsdpfxei Am U Ds Abtowt F2/10 chassis F2/30 pneumatic 3-point adjustment (radius, chamfer, flush trimming)

Condition: new, Year of construction: 2026, Hebrock F 4 For the complete processing of your panels For those who don’t want to compromise. With the F 4, we offer you a model that allows you to produce completely finished edges on a machine length of only 4 meters. The F 4 is not only space-saving but also extremely attractive in terms of price-performance ratio. Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 – 50 mm Min. workpiece length: approx. 160 mm Feed speed: approx. 7 m/min Ready for operation: approx. 3.5 min Max. power consumption: approx. 7.4 kW Bodpfx Aehqadcsbtjwt Electrical connection: 400 V – 3 phases – 50 Hz Work table height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (L x W x H) Weight: approx. 820 kg Extraction nozzle: Ø 1 x 140 mm PLC control with 10″ touchscreen Top-mounted rapid heating glue tank (maintenance-free) Support plate for edge material Automatic central lubrication (miter saw, corner router) Optical display for workpiece sequence Outrigger (extendable to the front) Quick-change unit preparation, including glue change device for PUR processing Surface scraping blade with dual contact Pneumatic roller capping (scissors-type design, Hebrock system) Double roller pressure (ball-bearing mounted) Transport chain with permanently screwed-on special chain plates Edge router Routing unit Miter saw Corner router Accessories: F4/09 Radius scraping blade (incl. pneumatic lift) F4/09/4 Multi radius scraping blade (R1/R2) F4/30 Pneumatic 3-point adjustment Location: In stock, 54634 Bitburg - available on short notice -

Condition: new, Year of construction: 2026, The Hebrock K 36 Top model with motorized adjustment – a new machine. This Hebrock bestseller offers unprecedented possibilities. Developed for the highest standards, the K 36 stands for absolute reliability and productivity in daily use. By enabling the machine to be equipped with a stepped cutter and a multi-radius trimming cutter, Hebrock sets new standards in the field of perfect edge finishing for various edge thicknesses. Max. edge thickness: 3 mm Bodpfsi Am Ukox Abtowt Max. workpiece thickness: 60 mm Ready for operation in 6 min. Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 – 60 mm Min. workpiece length: approx. 140 mm Feed speed: approx. 15 m/min Ready for operation: approx. 6 min Max. power consumption: approx. 7.4 kW Electrical connection: 400 V – 3 phases – 50 Hz Work table height: approx. 900 mm Machine dimensions: approx. 5250 x 1230 x 1430 mm (L x W x H) Weight: 1750 kg Equipment: Hebrock K 36. - 15 m/min Edge banding machine K36 With PLC control (incl. 15'' touchscreen), hot melt adhesive application to the workpiece for edge material up to 3 mm; trimming cutter (incl. diamond tool) up to 3 mm cutting depth, maintenance-free, coated glue tank with interchangeable tank preparation including glue discharge device, high-frequency double-motor trim saw station (approx. 12000 rpm), high-frequency milling station (approx. 12000 rpm) with pneumatic milling adjustment and interchangeable cutter (combination design), corner rounding cutter, radius trimming cutter, flush trimming cutter (incl. pneumatic retraction device), cleaning station, robust chain drive, ball-bearing double roller pressure, unit sight window from the machine rear and operator side, signal lamp for workpiece sequence, pull-out workpiece support, feed speed approx. 15 m/min, edge banding up to 60 mm workpiece thickness 36/08/1 Quick-change preparation for corner cutter 36/08/2/1 additional interchangeable motor for corner cutter R=1 36/09/1 Multi-radius trimming cutter 36/24/1 Release agent spray device 36/24/2 Cleaning agent spray device 36/25 Edge protection spray 36/27 Nesting (1x milling station + 1 x radius trimming cutter) 36/30 Pneumatic 3-point adjustment 36/30/1 Multi-tool for high-frequency milling station (R2/R1/chamfer) 36/45 Axis package Motorized adjustment for panel, edge thickness, and trimming cutter depth adjustment Location: in stock, 54634 Bitburg Available upon agreement.

Condition: new, Year of construction: 2026, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edgebanding in demanding workshops. The F 5 guarantees edge processing in all steps, as it is equipped with all the components you need for your requirements: jointing cutter, miter saw, milling unit, radius pull blade, corner cutter, surface pull blade, and finishing station. For even more flexibility on the way to the perfect finish, the F 5 can optionally be equipped with a practical multi-radius pull blade. Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Hebrock F5 Next - 10 m/min Edgebanding machine F5 Next With PLC control (including touchscreen) and with hot melt adhesive application to the workpiece for edge material up to 3 mm; jointing cutter (including diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with interchangeable tank preparation including glue dispensing device, HF miter saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable plate cutter (combination design), corner rounding cutter, radius pull blade, surface pull blade (including pneumatic feed), finishing station, robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, pull-out workpiece support, feed rate approx. 10 m/min. Hebrock F5 F5/08/4 Quick-change preparation for corner cutter F5/08/5 additional interchangeable motor for corner cutter with tool set F5/09/4 Multi-radius pull blade (R1/R2) F5/10 Chassis F5/14 additional interchangeable tank Bedpfolht Hwjx Abtswt F5/24/1 Spray device for release agent F5/24/2 Spray device for cleaning agent F5/25 Spray device for edge F5/27 Nesting for cutter and radius pull blade F6/28 Spray texture finish F5/30 Pneumatic 3-point adjustment (radius, bevel, flush milling) F5/31 Jointing up to 50 mm F5/32 LED lighting Location: In stock, 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2026, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edge banding in demanding craft businesses. The F 5 guarantees edge processing in all steps, as it is equipped with all the components you need for your requirements: grooving cutter, miter saw, milling unit, radius pull blade, corner cutter, surface pull blade, and finishing station. For even more flexibility on the way to the perfect finish, the F 5 can optionally be equipped with a practical multi-radius pull blade. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Hebrock F5 Next - 10 m/min Edge banding machine F5 Next With PLC control (incl. touchscreen) and hot melt adhesive application to the workpiece for edge material up to 3 mm; grooving cutter (incl. diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with interchangeable tank preparation incl. glue dispensing device, high-frequency miter saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable plate milling cutter (combination design), corner rounding cutter, radius pull blade, surface pull blade (incl. pneumatic lifting mechanism), finishing station, robust chain drive, ball-bearing double roller pressure pad, viewing window from the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. Bedpsi Anadefx Abtjwt Hebrock F5 F5/08/4 Quick-change preparation for corner cutter F5/08/5 additional interchangeable motor for corner cutter with tool set F5/09/4 Multi-radius pull blade (R1/R2) F5/10 Undercarriage F5/14 additional interchangeable tank F5/24/1 Spray device for release agent F5/24/2 Spray device for cleaning agent F5/25 Spray device for edge F5/27 Nesting for milling cutter and radius pull blade F6/28 Spray for texture finish F5/30 Pneumatic 3-point adjustment (radius, bevel, flush milling) F5/31 Jointing up to 50 mm F5/32 LED lighting Location: In stock at warehouse 54634 Bitburg Immediately available - in stock.

Condition: new, ALTENDORF Model F 2 Offer type: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine at a special price with full manufacturer's warranty. The 3.3 m long F 2 is not only cost-effective and space-saving. It is also equipped with everything you need to process perfect edges from the start: diamond-tipped jointing cutters ensure workpieces are excellently prepared for edge banding. The equipment includes a jointing unit (up to 2 mm cutting depth), top-mounted quick-heating glue pot, cross-cut saw, and combination milling cutter. Optionally, the F 2 can also be fitted with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Feed rate approx. 10 m/min Equipment: F2 next edge banding machine With PLC control (incl. touchscreen) Hot-melt adhesive application to the workpiece for edging material up to 3 mm Jointing cutter (incl. diamond tool) up to 2 mm cutting depth Maintenance-free glue pot with quick-change option incl. glue discharge device HF cross-cut saw station (approx. 12,000 rpm) HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable cutter head (combination version) Robust chain drive Ball-bearing double pressure roller Viewing window from the rear of the machine Extendable workpiece support Including special equipment: F2/12 surface scraper (incl. pneumatic lift) F2/30 pneumatic 3-point adjustment (for radius, chamfer, or flush trimming) F2/27 nesting for milling stations Bwjdpfx Abjl D Rp Ejtjt