Used Homag Kal 310 for sale (483)

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 0-250-95-6951, functionality: fully functional, operating hours: 682 h, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, working width: 1,415 mm, spindle motor power: 10,000 W, working length: 3,100 mm, 2017 HOMAG Weeke Venture 115 CNC machining centre in excellent condition. Lightly used machine with very low spindle hours for age. Moved once since initial install. Machine is currently installed, calibrated, and available for inspection under power. - 10kw spindle - 18 position drill block with grooving saw - Multipurpose saw 118mm cut depth - 22 position tool change capacity - Pod & Rail Table with LED positioning indicator Dodpfjy S Dfbsx Abzjch This is a clean, well-kept machine from a low-use environment, not a hard-worked production machine. Important point on specification: the machine is 5-axis capable, but the additional 5-axis software licence is not included in the sale. This can be added via Homag at additional cost if required. Buyer responsible for decommissioning, loading, transport and insurance. Machine available for demonstration in situ by appointment.

Condition: used, machine/vehicle number: 008479, Max. machining width: 1650 mm Min. machining thickness: 3 mm Working Table: Fixed pass height No. Operating units: 4 Nr Dcodpfsy Edqwjx Abzjh

Condition: used, machine/vehicle number: 008495, X axis working area: 3050 mm Y axis working area: 1400 mm Dodpfx Aoy Edqqsbzjch Working Table: Pod and Rail Main Electrospindle power: 11 KW Number of controlled axes: 4 axes Maximum edge height: 45 mm Total number of drilling spindles: 21 Total number of tool changer positions: 12

Condition: used, Year of construction: 2021, input voltage: 400 V, input current: 17 A, input frequency: 50 Hz, type of input current: three-phase, We are offering this used HOMAG EDGETEQ S-240 edgebander, year of manufacture 2021. The package includes a KOGI dual-bag chip extractor, 2.2 kW / 1650 Pa. The machine comes with an additional glue pot. An appraisal report is attached in the PDF. Type: EDGETEQ S-240 PROFI KDF 230 Dedpoy Exwfjfx Abzsch Machine number: 0-261-73-7111 Year of manufacture: 2021 Wiring diagram: 0-261-73-7111 Supply voltage: 400Y/230 V Number of phases: 3 Frequency: 50 Hz Maximum full-load current: 17.3 A Fuse: 20 A Short-circuit current: 5 kA Control voltage: 24 V Enclosure rating: NEMA 1 Largest motor: 4.6 A Largest heater current: 2.3 A If you have any questions or require further information, please send us a message or contact us by phone.

Condition: used, machine/vehicle number: 008587, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Dodey In Dgjpfx Abzoch Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, machine/vehicle number: 008586, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Dcjdpfxsy In A Ns Abzoh Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, machine/vehicle number: 008588, Max. panel width: 1600 mm Max. panel length: 3700 mm Main saw blade projection: 125 mm No of Grippers: 9 Thin sheet loading: yes Dcsdpfey In Avjx Abzeh

Condition: used, machine/vehicle number: 008589, Max. panel width: 1600 mm Max. panel length: 3700 mm Main saw blade projection: 125 mm No of Grippers: 9 Thin sheet loading: yes Dcedpfey In Apex Abzoh

Condition: like new (used), functionality: fully functional, Ferwood Code: RS0003616 - Manufacturer Code: 2-083-02-7120 - Condition: As new (display item) - Functionality: Fully operational - Compatible Machine: - Weight: 2.5 kg - Dimensions: 36x26x21 cm - If interested, we offer an overhaul service; please contact us. Dcodpfx Aboyz T Ttozjh

Condition: ready for operation (used), Year of construction: 2022, machine/vehicle number: 0-341-73-4415, functionality: fully functional, operating hours: 4,522 h, power: 7.5 kW (10.20 HP), cutting width (max.): 3,200 mm, saw blade diameter: 310 mm, saw blade bore: 60 mm, overall weight: 5,000 kg, TECHNICAL DETAILS Maximum cutting width: 3,200 mm Maximum cutting length: 3,200 mm Dcsdsy Ai Upspfx Abzeh Saw blade projection: 65 mm Maximum feed speed: 60 m/min Programmable pusher speed forward: 25 m/min Programmable pusher speed backward: 60 m/min Saw carriage speed: 60 m/min Manual crosscut stops: 4 units Saw blade bore diameter: 60 mm Maximum saw blade diameter: 310 mm Scoring unit bore diameter: 45 mm Scoring saw blade diameter: 150 mm MACHINE DETAILS Control: CADmatic 5 Main saw motor: 7.5 kW Operating hours: 4,522 Dimensions & Weight Transport dimensions: 8,000 x 2,400 x 2,000 mm Transport weight: 5,000 kg EQUIPMENT Intelliguide optical LED guidance system 1 air table 2,100 x 650 mm with roller elements 2 air tables 1,800 x 650 mm with roller elements 21.5-inch touchscreen CAD Plan 4 optimization software Clamping fixtures: 50, 250, 450, 1200, 2000, 2700 mm Scoring saw unit

Condition: good (used), Year of construction: 1996, for max. panel size of 320 cm length and 220 cm width or depth Dcodpfx Abjy Nfdyszeh undismantled, located in Bad Berleburg

Condition: used, functionality: unexamined, Ferwood Code: AGG0213 - Manufacturer Code: 1-056-09-3351 - Condition: Used - Functionality: Not tested - Compatible Machine: - Weight: 8 kg - Dimensions: 46x39x27 cm - If interested, we offer an overhaul service. Please contact us. Dcedpfx Asyztt Hsbzsh

Condition: used, functionality: unexamined, Ferwood Code: AGG0213 - Manufacturer Code: 2-056-10-0220 - Condition: Used - Functionality: Not tested - Compatible Machine: - Weight: 6KG - Dimensions: 36X26X21 - If interested, we offer an overhaul service; please contact us. Dcodpeyztr Asfx Abzeh

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, CNC Machining Center HOMAG BOF 311 Available August 2026 - Year of manufacture: 2008 (annual service by HOMAG) - Main spindle overhauled in 2024 - WoodWop software - AP table (automatic table) Dcodpfx Abey I Dtqszsh - Table dimensions: 6000 x 1525 mm (10 consoles) - 18.5 kW main spindle / C-axis + Flex-5 interface - Y-axis machining with front stops: 1525 mm - Y-axis machining with rear stops: 1850 mm - Drilling unit - 30-position tool chain changer - Grooving saw unit on X-axis (swivable 0-90°) - Without tools / aggregates / chip conveyor - Vacuum pump If you have any questions, feel free to contact us. Additional photos/video available upon request. A viewing during production operation is possible; we will be happy to organize this for you.

Condition: used, machine/vehicle number: 006622, Max. panel width: 2100 mm Max. panel length: 2850 mm Dedpfxju T Tt Tj Abzsch Max. panel stack height from the ground: 2100 mm Lifting capacity: 250 Kg Movement system: suction cups.

Condition: excellent (used), C.N.C. WORKING CENTER 3 axes (X-Y-Z) Vertical position of the panel (workpiece) Movable panel (workpiece), movable working head Numerical Control POWERCONTROL + POWERTOUCH Software woodWOP Safety cabin (enclosure) of the working head No. 1 Workpieces fixing clamps (for the panels introduction in the working area Panels feeding by motorized chain/track Minimum workpieces dimensions (X - Y - Z) mm 200 x 70 x 8 Maximum workpieces dimensions (X - Y - Z) mm 3050 x 850 x 56 Total installed power (Kw) 11,5 (ca.) WORKING GROUPS: No. 1 Drilling head (power Kw 2.3) with vertical spindles - No. 13 Independent vertical boring spindles (V13 High Speed) - No. 6 Independent horizontal boring spindles (4 in X + 2 in Y) Dedpfxoyywcve Abzsch No. 1 Circular Grooving Saw (on X axis) dia. (mm) 100 No. 1 Vertical electro-spindle (HKS63) power Kw 5 Automatic Tools Changing System - Tools storage plate (No. 4 folds-positions)

Condition: excellent (used), FLEXIBLE C.N.C. WORKING CENTER 3 axes (X-Y-Z) Movable panel (workpiece), static working head - Horizontal position of the panel (workpiece) Safety cabin (enclosure) of the working head Numerical Control PowerControl PC86 power Touch (Software woodWOP) Separate electric and command cabinet No. 2 Workpieces fixing clamps (for the panels introduction in the working area) WEEKE Prepositioning Unit - to position workpieces in machine with clamp grippers faster. In-feeding working table (panel support) and Out-feeding table (with motorized belts) Minimum workpieces dimensions (X - Y - Z) mm 200 x 70 x 8 (2 x 4 mm) Maximum workpiece dimensions (X -Y- Z) mm 3000 x 1000 (option mm 1300) x 80 (2 x 40 mm) Two panels simultaneously processables (in Z axe) Separate electric and command cabinet WORKING GROUPS (TOP): 2V42, 2H8X/2Y, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle ETP-6 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 42 Vertical drilling spindles (power Kw 2.3) No. 10 Horizontal drilling spindles (8 in X + 2 in Y) WORKING GROUPS (BOTTOM) 2V42, 2H8X/2Y, N2 X-Y90,F2-ETP-6 KW No. 1 Vertical electro-spindle ETP-6 (power Kw 6) No. 1 Circular Grooving Saw (90° on X-Y axe) dia. mm 125 No. 42 Vertical drilling spindles (power Kw 2.3) Dcjdpfjyyvttjx Abzeh No. 10 Horizontal drilling spindles (8 in X + 2 in Y)

Condition: excellent (used), Numerical Control Power Control + Software Cadmatic 4 Professional No. 1 Infeed roller tracks (ca.) 32,000 mm Lifting table (mm) 5600 x 2200 VAC loader (sliding bridge) with fan suction for loading special or delicate panels 1° Rear-pusher, with No. 6 clamps/grippers Turning device (rotating unit) at 90° 1° Panel Saw - Max cutting width mm 5600 (cutting line with air cushion) Max blade projection (mm) 190 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 600 ( Kw 36) Dodpfx Abevnq H Ejzoch Adjustable speed of the saw carriage (QS) (m/min) 1 - 130 m/min 2° Rear-pusher, with No. 14 clamps/grippers 2° Panel Saw - Max cutting width mm 2200 (cutting line with air cushion) Max blade projection (mm) 190 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 600 (Kw 36) Adjustable speed of the saw carriage (QS) (m/min) 1 - 130 m/min Waste evacuation system with grinder (Kw 19.5) No. 2 Front supporting tables with Air blowing system (mm 800 x 2160) Plastic wheels coated with special material to avoid scratching delicate panels Automatic unloading System of the cut panels: N° 2 x Liftomat HAU-A 25/12 Automatic Stacking System with 8 stations

Condition: excellent (used), Year of construction: 2009, machine/vehicle number: 70004, functionality: fully functional, Equipment: CE marking, Technical Specifications Dimensions - length: 9.8 m - width: 1.5 m - height: 1.8 m Motor power: 40 kW Equipment - feed speed: 6 - 30 m/min - panel thickness: min. 8 mm, max. 60 mm - panel width (including edge): min. 65 mm (with edge thickness 0.4 - 3 mm) - panel length: min. 150 mm Dcsdjyzc Igjpfx Abzsh - edge height: min. 14 mm, max. 65 mm - edge thickness: min. 0.4 mm, max. 20 mm

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input frequency: 50 Hz, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: electric, feed rate X-axis: 25 m/min, total length: 7,845 mm, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, HOMAG Ambition 2260 Dcedpfxsyu S Ius Abzoh

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Working height: 900 mm Working width: 1,350 mm Belt changing side: left Workpiece thickness: 3 - 160 mm Frequency-controlled feed speed: 4 - 20 m/min Abrasive belt dimensions: 2,620 x 1,350–1,380 mm Adjustable sanding belt blowing device with 5 settings WRD WORKPIECE CLEANING ROTOR Workpiece cleaning system with 16 rotating nozzles MOBILE OPERATING TERMINAL powerControl with powerTouch SST SOFT STARTER Inrush currents are limited to prevent voltage drops GWRD BELT CLEANING PROGRAM Upon activation, the machine automatically sets to a 10 mm workpiece thickness and activates the blowing rotors. After the feed belt is fully cleaned, the machine returns to its initial setting. AAT EXTRACTION DAMPER CONTROL Control of extraction dampers via the terminal (24 Volt DC, without extraction dampers included) UPS EMERGENCY POWER SUPPLY FOR BELT CONTROL 1-3 PCS Uninterruptible power supply for sanding belt oscillation in case of power failure System consists of: SANDTEQ W-700, PROFI SWB735/RRE – sanding from below Wide belt sanding machine with three sanding units for processing wood or wood-like workpiece surfaces Prepared to accept up to two auxiliary units, such as a cleaning brush, satinizing or structuring brush, and rotating cleaning nozzles. Units: I. R UNIT Sanding unit with automatically adjusting contact roller Profiled steel roller, 240 mm diameter With grain compensation Drive motor: 37 kW Abrasive belt speed: 25 m/s - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation II. R UNIT Sanding unit with automatically adjusting contact roller Rubber-coated roller, 240 mm diameter Rubber hardness: 85° Shore With grain compensation Drive motor: 30 kW Abrasive belt speed: 18 m/s Dedpsyw Ndmjfx Abzjch III. E UNIT Sanding unit for installing a pressure beam - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation - Protected storage area on the machine for additional sanding inserts Drive motor: 22 kW Abrasive belt speed: 2 – 18 m/s Torque-dependent standby operation to reduce energy consumption. ACP PNEUMATICALLY SUPPORTED PRESSURE BEAM - Adjustable sanding pressure via pressure regulator - Workpiece-controlled engagement and disengagement at the leading and trailing edges - Various sanding inserts, 80 mm wide, with different felt hardnesses Machine dimensions (L x W x H): 3,900 x 2,100 x 2,000 mm Machine weight: approx. 7,500 kg SANDTEQ B-700, PROFI SWT735/RRE – sanding from above Wide belt sander with three sanding units for machining wood or wood-based workpiece surfaces Units as above, additionally: FBM FINISHING BRUSH Brush unit with finishing brush Bristles: horsehair Diameter: 130 mm Drive motor: 0.75 kW Machine dimensions (L x W x H): 2,995 x 2,100 x 2,255 – 2,415 mm Machine weight: approx. 6,500 kg

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) 4 axis Goose-neck type Numerical Control Power Control - Software woodWOP Safety cabin (enclosure) of the working head Working table with pods and rails- No. 6 Support rails Front emergency carpets LASER system on X-axe for the rails positioning and on Y-axe for the vacuum pods positioning Automatic Tools Changing System No. 2 Tools storage plates W8 (No. 8 rear spaces) + (No. 8 lateral spaces) Max. useful working area (X - Y - Z) mm 3130 x 1250 (1550) x 100 (150) No. 2 Working areas - 1 x Vacuum pump (capacity 70 m3/h) Motorized carpet to evacuate chips and wastes Separate electric and command cabinet Total installed power A 32 WORKING GROUPS (TOP): No. 12 Independent vertical boring spindles (High Speed 7500) No. 6 Independent horizontal boring spindles (No.4 in X-axe + No. 2 in Y-axe) Drilling head motor-power (Kw) 2,3 Circular Grooving Saw (tiltable 0°- 90°) diam. (mm) 125 (N1 X-Y 90°) No. 1 Vertical electro-spindle: HSK63 (KW 9) OPTIONAL: Drilling Group with No. 4 horizontal boring spindles (Crosshead) Dcjdjyxn Tiopfx Abzeh PROFESSIONAL BARCODE READING SYSTEM

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Machine number: 559969 Manufacturer: HOMAG Model: PROFI BAZ 723/42/18/KC Year of manufacture: 2004 Technical details: Weight approx.: 10000 [kg] control: PC85 [] Dimensions (l x w x h) approx.: 39000 x 3200 x 3200 [mm] c-axis: ja / yes [] software: WoodWOP [] working length x-axis: max. 4.200 [mm] working width y-axis: max. 2.075 [mm] main spindle: 2x 14,5 [kW] tool changer: 2x 18-fach / 2x 18-fold [] vacuum pump: 2x 100 [cbm/h] edge gluing unit: ja / yes 360° [] path-feed rate max. X-axis: 80 [m/min] path-feed rate max. Y-axis: 60 [m/min] path-feed rate max. Z-axis: 40 [m/min] Item Description High-End-equipped, technically well maintained HOMAG PROFI BAZ 723/42/18/KC CNC Machining Center in portal design with 360° edge glueing unit, 2 main spindle with C-axis, automatically positionable clamping consoles and HOAMG Optimat TBP 370 vacuum feeder in in portal design. The original price was approx. 620.000 EUR. Technical data and equipment of the HOMAG Profi BAZ 723 CNC: - Workpiece length for single operation max. 4.200 mm - Workpiece length cutter Ø 25 mm for pendulum operation max. 2.040 mm - Workpiece length glueing for pendulum operation max. 1.850 mm - Workpiece width (cutter Ø 25 mm) max. 2.075 mm - Workpiece width (glueing) max. 1.950 mm - Workpiece width (all aggregates) max. 1.850 mm - Console table KC-System 2 pieces left/right automatic positioning of the consoles and vacuum clamps - First main spindle with C-axis motor 14,5 KW speed 0 - 24.000 U/min tool changer 18-fold (without tools, HSK holders and aggregates!) drill head 17 spindles vertical (7 spindles X-direction, 11 spindles Y-direction) drill head 4 spindles horizontal 4-SP+Sawe 0/90 dedree blow-off nozzle pneumatically on carrier - Second main spindle with C-axis motor 14,5 KW speed 0 - 24.000 U/min tool changer 18-fold (without tools, HSK holders and aggregates!) drill head 17 spindles vertical (7 spindles X-direction, 11 spindles Y-direction) drill head 4 spindles horizontal 4-SP+Sawe 0/90 dedree blow-off nozzle pneumatically on carrier - Edge gluing aggregate 360° glue with butt joint mounted on the right side of the portal with Y-axis drive Drive spindle with C-axis edge height max. 65 mm edge thickness 0,4 - 3 mm pre-cutting station and 2-fold roller magazine Dcodpfx Absxvy Ukezoh - Chip conveyor belt for automatic disposal with ascending conveyor (The tools, the HSK holders and the units for the tool changer are not included within delivery. A transport rack from HOMAG is required for transportation of the dismantled machine. Terms of payment and delivery Delivery terms: ex foundation, unpackaged Payment terms: 100% before loading Warranty: Without any warranty

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, workpiece length (max.): 2,500 mm, TECHNICAL DETAILS Panel length min.: 300 mm Panel length max.: 2,500 mm Panel return system for edge banding machine: Left Panel ejection: via air nozzle table Dcedpfxoyxnape Abzsh The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7877

Year of construction: 2014, condition: excellent (used), I sell the automatic magazine HOMAG BARGSTEDT Profi TLF210/21/10, year 2014. Storing 22 Positions of Material 2,80 x 2,10m Dsdpoyzcc Rjfx Abzsch Total size 21 x 10 m x h.3,5m. Stapel / Abstapelanlage 2 Posizionen. Catching head system with vacuum pads Vacuum-System (including pump) Automatic loading. Security fence system fully complete ! Available immediately. Ready for work, possible to test. With CE Certificate and full manuals.