Used Horizontal Hydraulic Press for sale (41,627)

Condition: like new (used), Year of construction: 1991, total height: 987 mm, total width: 505 mm, total length: 735 mm, throat depth: 125 mm, pressing force: 3 t, table width: 410 mm, table length: 320 mm, operating speed: 47 mm/s, oil tank capacity: 6 l, input voltage: 200 V, for sale in new condition ATSUGI 3 ton Hydraulic Press Atsugi Model AP-3-M Used load range: 6-30 (kN) Stroke: 150mm Down speed: 46.7 (mm/s) Up speed 56.7 (mm/s) two-handed operation mobile workbench Operating area: Open height: 250mm open depth: 125mm table size: 410x320mm Motor specification 3 phase AC200V 4P 1.5KW two-handed operation . mobile workbench Operating oil / quantity: 6 Liter Total weight (kg) 200 Body size ​ Height (mm) 987 width (mm) 505 Depth (mm) 735 Njdpfx Asv Sd Anea Asdd

Condition: as good as new (ex-display), Year of construction: 2025, Hydraulic SPS press 100to (1.000KN) pressing force Siemens SPS1200 series Screen 10" Beijer stroke 400mm table top 790mm x 600mm Nodpfx Aenp Ndhja Aedd Speed forward 110mm Speed return 140mm Light curtain Sick Remote maintenance module built in Rexroth hydraulics with cooler Available from week 46 fairground Stuttgart Modifications can be realized after request if necessary

Condition: good (used), Year of construction: 1982, Press force: max. 200 kN Ndsdpjxr Ay Uofx Aa Aed Safety distance: 100mm Post-travel: max. 10 mm Motor power: 3 kW

Year of construction: 2000, condition: excellent (used), Force: 300 tons Windows: Yes Daylight: 1000mm Table: 1800x1000mm Ram: 1800x1000mm Stroke: 600mm Ndodpsgbvkvjfx Aa Aed Weight: 43 tons Height: 4700mm Siemens S7 control Floorstanding Sick lightguards Die cushion: 200mm stroke

Condition: used, Year of construction: 1961, pressure 025 t table-size 450 x 500 mm stroke 500 mm dayligth 550 mm throat 200 mm table height over floor 800 mm Nedpfexukpcsx Aa Aodd hole in the table 130 mm

Condition: good (used), Hydraulic press, single-column press, C-column press, oil-hydraulic press, hydraulic single-column press -Handover: in its current condition as inspected -Note: without hydraulic unit and control system -Pressing force: 40 tons -Piston rod: Ø 105 mm -Max. stroke: 710 mm -Mounting plate: 550 x 800 x 45 mm -Mounting plate holes: Ø 18 mm -Dimensions: 890/1570/H610 mm Ndsdpfx Asupbdgsa Ajd -Weight: 826 kg

Condition: like new (used), Year of construction: 2007, functionality: fully functional, pressing force: 10 t, table width: 430 mm, table length: 410 mm, overall weight: 550 kg, for sale in new condition ATSUGI 10 Ton Hydraulic Press Atsugi AP-10-KL year of manufacture:2007 Used load range:40-100 (kN) Stroke (mm): 200 Lower speed (approach fast speed: 350 (mm/s) Lower speed (under pressure slow speed:180 mm/s Rise speed 200(mm/s) Operating area: Open height: 350mm Open depth: 225mm Table size: 430x410mm Motor specification 3 phase AC200V 4P 1.5KW Ndedpfxjv Sd Htj Aa Ajd Two-hand operation . Mobile workbench Operating oil / quantity Daphni Hydraulic 46/9L Total weight (kg) 500 Body size ​ Height (mm) 1325 Width (mm) 485 Depth (mm) 915

Condition: good (used), functionality: fully functional, throat depth: 500 mm, pressing force: 160 t, table width: 1,250 mm, Output 160 tonnes --- Working length 1250 mm --- Stroke 250 mm Thrust 500 mm Installation height max. 480 mm Weight approx. 11.2 tonnes Output 30 kW Nedpfx Aexxbmtja Aedd Area of application: universally applicable machine: Straightening / bending / pressing / folding etc. --- Was previously used as a folding press with system tool holder + tools .

Condition: good (used), Year of construction: 1979, Condition: 2012 overhauled to the latest UVV Installation height: 800 mm Ram stroke: 500 mm Projection: 360 mm Nominal force: 400 kN Hydraulic pressure: 160 bar Ndodexr Azxepfx Aa Aod Operating hours: 1356 Other: new control from Pilz, electrical circuit diagrams available Video about functionality available

Year of construction: 2022, condition: like new (used), functionality: fully functional, Gates MCX 25 hydraulic hose crimping machine for sale – like new, barely used machine. Please refer to the technical specifications on the Gates manufacturer's website. Additionally, the Gates MK 3000 hydraulic hose cutting machine is also available for purchase. The listed price is net and applies only to the hydraulic hose crimping machine. Nodjxw Rzkepfx Aa Aedd

Condition: repair required (used), Year of construction: 2000, Hydraulic press for ceramic tiles SACMI PH380, the machine has incomplete control system. Nodoxvdnbepfx Aa Aodd

Condition: excellent (used), functionality: fully functional, Horizontal hydraulic layer press Two-hand operation Ndedexbgftepfx Aa Aod Electrical connection 400V/50Hz, 200kg

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, throat depth: 180 mm, pressing force: 5 t, table width: 450 mm, table length: 320 mm, operating speed: 300 mm/s, overall weight: 270 kg, type of input current: three-phase, oil tank capacity: 9 l, Hydraulic Press Atsugi AP-5-KL Used Load Range: 20-50 (kN) Stroke (mm): 150 Lower Speed ​​(Approach Fast Speed: 350 (mm/s) Lower Speed ​​(Under Pressure Slow Speed: 36mm/s Rise Speed ​​250 (mm/s) Working Area Open Height: 250mm Open Depth: 180mm Ndsdpfxovbdpye Aa Aod Table Size: 450x50mm Motor Specification 3 Phase AC200V 4P 1.5KW Two-Hand Operation . Mobile Worktable Fuel Oil / Quantity Daphni Hydraulic 46/9L Total Weight (kg) 270 Body Size ​ Height (mm) 986 Width (mm) 485 Depth (mm) 920

Condition: good (used), pressing force: 100 t, For Sale: Ursviken VP100 – Hydraulic Press Brake High-quality Ursviken VP100 hydraulic press brake for sale. Manufactured in Sweden, Ursviken machines are renowned for their robustness, precision, and long-lasting durability. Ideal for a wide range of bending and pressing tasks in industrial applications. 🔧 Technical specifications (example values, please fill in): Pressing force: 100 tons Working length: [e.g. 3000 mm] Stroke length: [e.g. 200 mm] Year of manufacture: [year] Drive: hydraulic Control: manual / CNC (specify) Machine weight: [approx. 6000 kg] Ndjdpoxv Ek Dofx Aa Ajd 💡 Key features: Rigid and durable construction Accurate and repeatable pressing operations User-friendly and easy to maintain Suitable for small and medium batch production Machine is in working condition and ready for use. Contact us for more information or an offer!

Condition: good (used), Maximum pressing force 10 tons. Njdpfx Aaoxr Azfe Aedd Working pressure 16 MPa Cylinder stroke 400 mm Down speed 100mm/sec Speed up to 450 mm/sec Power requirement 5.2 kW Weight 1.3 tons Clamping table changed! Not an original table!

Year of construction: 2006, condition: ready for operation (used), General Data Measurements width 2550 mm Measurements depth 5450 mm Measurements height 3150 mm Machine weight 24500 kg Ndodpfx Aaexnd The Asd Main Drive Pressing force 400 t Stroke 300 mm This ERMAK CNC HAP 4100x400 was manufactured in 2006. It features a CYBELEC DNC 60 control system, a maximum working length of 4100 mm, and a press force of 400 t. The internal distance between columns is 3550 mm, and it includes a laser safety system. Consider the opportunity to buy this ERMAK CNC HAP 4100x400 hydraulic press. Contact us for more information about this machine. Application Types Bending

Condition: used, Ceramic tile press SITI MAGNUM 800. Pressing force: 800 tons. Nsdpexu N H Hsfx Aa Aedd

Condition: excellent (used), functionality: fully functional, table height: 585 mm, die cushion stroke: 280 mm, table width: 2,900 mm, table length: 5,000 mm, installation height: 1,190 mm, pressing force: 2,000 t, die cushion force: 380 t, stroke length: 1,050 mm, The machine on offer is a hydraulic tryout press. This press underwent a comprehensive general overhaul in 2014 by a specialist company in Germany. During the overhaul, the mechanics, electrics, and hydraulics were completely renewed and modernized. Only components from renowned European manufacturers were used for the refurbishment. A particular highlight of this tryout press is that both the ram and the bolster are equipped with draw cushions. Nodoxgz Rnjpfx Aa Ajdd The bolster is designed as a movable table. The ram can be stopped and mechanically locked in any position as required. Technical specifications: Table size: 5000 mm x 2900 mm Draw cushion size: 4200 mm x 1800 mm Draw cushion stroke: 280 mm Draw cushion force: 380 t Draw cushion operation: 4-way controlled draw cushion, compensation not required Table height above floor: 585 mm Ram size: 5000 mm x 2900 mm Ram force: 2000 t Ram cushion size: 2400 mm x 1200 mm Ram cushion stroke: 150 mm Ram cushion force: 200 t Ram return force: approx. 120 t Ram up position: 2350 mm Ram stroke: 1050 mm Air pins retracted by 185 mm Max. die installation height: 1190 mm Lower clamping: manual Upper clamping: manual Centering: via air pin pattern Sliding bolster: 3000 mm travel distance Ram locking: stepless Cut stroke damping: not available The above information is based on the machine documentation. The seller does not assume any liability for the completeness or accuracy of these details. The actual technical specifications and functions of the machine are decisive.

Condition: like new (used), Year of construction: 2018, functionality: fully functional, pressing force: 3 t, Equipment: safety light barrier, For sale in new condition HYUNDAE CETTA HHP-3 hydraulic press "more pieces" manufacturer: HYUNDAE "Korea" type: HHP-3 year of manufacture: 2018 Nsdpfsvbd U Aox Aa Aodd load range: 1-3 tons Stroke [mm] 150 open height: 250 mm -safety light gate -two-handed operation .-mobile work table Hyundae press control Pressing rod closing speed: 178mm/sec Pressing rod pressing speed: 54mm/sec Opening speed 79 mm/s Table size: 450x360mm Max. Working pressure: 60kg·f/㎠ Hydraulic motor 1,5 kW 3 phase/4P 200v Weight: 350kg machine height "without table": 1415mm machine length: 950mm machine width: ca 700mm working table with casters or level bolts

Condition: like new (used), Year of construction: 2022, machine/vehicle number: DF0147, Pressure: 150 t Total power requirement: 20 kW Machine weight approx.: 11.5 t space requirement approx.: 8800 x 1800 x 2200 mm pressure setting infinitely variable via rotary control : 15-150 t cylinder diameter : 100 mm pressing speed (infinitely variable via joystick) : 0-9,9 mm/s servo motor : 2 kW cooling unit : 1 kW Oil tank (under press table): 350 l Oil cooling (electric): 1 kW (max) Profile straightening press 150 T with two pressure cylinders. The straightening machine is prepared for the particular type of material by interchangeable rounded spacer elements. The replacement of the 10 inserts is done manually by simply pushing them into the holding grooves. The scope of delivery includes basic equipment for one profile. The program for the respective profile is then called up on the monitor. The monitor shows the ideal line and, in addition, an ascending and descending millimeter scale with 0.5 mm lines. The profile to be straightened is now placed on the left side of the table, pushed against a holder and clamped with a quick-clamping device. Both the holder and the quick-clamping device are mounted on a clamping plate for quick adjustment. This clamping plate moves on a linear guide from left to right and vice versa. Transport is by a chain drive and a servo motor. The movement is triggered by a joystick on the control panel. Nodpfx Aasfxygwo Ajdd After the profile has been clamped, the operator moves the clamping platen into the press using the joystick. The travel speed is up to 100 mm per second, but can be continuously adjusted down to 10 mm per second. To do this, it is sufficient to pull the lever of the control system slightly less. A high-resolution camera now shows the profile in the press. The operator sees exactly the deviation from the ideal line. Depending on the need, he now pushes or pulls the profile to the desired accuracy. He then continues to move slowly through the press, seeing in detail on the monitor whether the profile is now straight. Depending on the need, he can now move the profile forwards or backwards and readjust it. After the profile has been straightened, it moves out of the press on the right and can be removed. If desired, the clamping platen now moves back to the loading position on the left or it is now loaded from the right to save time. The press may only be operated under the following conditions: Perm. ambient temperature: 5-60 °C Permissible relative humidity: at 20°C - 90%, at 40°C - 50% Height of the installation site NN: + 1000 m Perm. fluctuations E-mains: +/- 10%.

Condition: like new (used), 2 column hydraulic press Press force: 200 t upper stroke: 500 mm lower stroke: 200 mm overall dimension: 1800x2200x3700 mm Nodpfx Aoghl N Uoa Ajdd Power: 10 PS Weight: 8.4 t

Condition: good (used), Year of construction: 1991, Our Hydrap 160 ton press with decoiler (model year 1999) / straightening machine (model year 1999) / feed unit (2004) is for sale. The system is only available as a complete unit. Ndsdpfx Aotu Szloa Ajd Operating hours: 20242 Condition: good condition Viewing possible and welcome. Location: Szügy / Hungary

Condition: good (used), Year of construction: 1972, functionality: fully functional, 1.0 pc Vertical press for application: SMC (Sheet Molding Compound) Manufacturer: LAUFFER Model: PRKP120 Ndedpfx Aswzaxpja Asd Year of manufacture: 1972 Pressing force: 120 tons Table: 1,200 x 1,000 mm Additionally heated table area: 800 x 800 mm Installation height: 810 mm Stroke: 790 mm Opening: 1,600 mm

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, pressing force: 5 t, table width: 400 mm, table length: 340 mm, overall weight: 500 kg, Equipment: safety light barrier, Hydraulic press JAM HYP-505H press machine in excellent condition for sale Manufacturer JAM HYP-505H model Model year 1990 Ndedpfxov Sd S Nj Aa Aod Capacity 50KN (5t) Stroke length 150mm Open height: 385 mm Table size 400 × 340 mm Punch hole φ25 × 60L mm Plunger approach speed: 260 mm/s Plunger pressing speed: 39 mm/s Ram return speed: 360mm/s Pressure range: 7.7 Mpa Safety light gate oil cooler Voltage 3 phase 200v 1.5kw 10A Press body weight: 400kg Operating oil: 25 liters Height (mm) 1070 Width (mm) 670 Length (mm) 1060 If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: as good as new (ex-display), Year of construction: 2023, Technical data PDM100R-5393 Capacity [Tm] 100 DIMENSIONS OF THE BOTTOM PLATE [mm] 900x600 Njdpfx Aajq Ula Rj Aedd DIMENSIONS OF TOP PLATE [mm] 850x550 GUIDING COLUMNS (x4) [Ø mm] 50 WORKING HEIGHT [mm] 950 MAX. OPENING [mm] 600 STROKE [mm] 420 FREE RUNNING SPEED [mm/s] 50-230 WORKING SPEED [mm/s] 2-15 WEIGHT [kg] 3000 SERVO POWER - PDM100R The new SERVO hydraulic units from Bosch Rexroth are designed to increase productivity and reduce productivity and reduce energy consumption by up to 80 during downtime, tool changes and between cycles. cycles. Increased efficiency in operation! EQUIPMENT - Proportional p/Q control with SvP5020 from Bosch Rexroth - Adjustable speed values on PLC. - AOPD light barrier technology - 12" LCD display - Configurable working parameters on PLC. - 50 pre-stored programs available on PLC. - Prefilled valves for fast speeds - Maintenance-free bronze graphite bushes. - Simplified hydraulic unit to reduce maintenance maintenance work.