Used Horizontal Hydraulic Press for sale (29,089)

Condition: new, stroke lenght (max.): 400performance of pump: 45cc-65motor: 22table height: (ohne Auflageplatte) 750 mm - (mit Auflageplatte) 820table area: 3000 mm x 2000 mm - Lichteweite : 2200Travel bridge: 2300motor: (IE-3) 22Return speed: 50- Capacity: 3000kN. (280 bar – 300 ton) - Cylinder: Ø 370mm. Djdpfxjr D U I Do Aa Njcg - Table surface: 3000 x 2000mm - Clearance: 2200mm. - Travel bridge: 2500mm. - Lateral travel cylinder: 900 + 900mm. away from the middle. (1800mm.) - Installation height: max. 1200mm. (distance table or support plate to cylinder piston) WITHOUT MANDS - Stroke length: 400mm. - Pump: 45cc – 65Lt./min. - Forward speed: 10 - 5mm / sec. - Return speed: 50 mm / sec. - Engine: 22kw. (IE-3) - Table height: 750mm (without support plate) - 820mm. (with support plate) Accesories: - Hydraulics: DUPLOMATIC  - Control: LENZE & SCHNEIDER  - Control cabinet is mounted on the side wall of the bridge  - Pressure adjustment via rotary valve valve  - Speed adjustable via throttle valve • Cylinder covered in chrome  - Remote control (with cable)  - Stroke length adjustable via distance sensors  - 400V 50HZ 3 phase  - Rotation lock for cylinders  - Cylinder can be moved laterally via drive motor  - Bridge can be moved via drive motor  - Soft starter for motor  - Cylinder piston mandrels: Ø 200 / 400 / 600mm. Long Extension mandrels (3 pieces) are included

Condition: used, machine/vehicle number: 3218, functionality: fully functional, Boldrini PAO 1000 Hydraulic Dishing Press, 1,000 tonne capacity Dcjdpfeyztnwsx Aa Neg 6,000mm distance between frame 2x GH overhead travelling workpiece manipulation cranes with independently supported runway, each with 2x 16 tonne capacity hoists

Condition: used, Year of construction: 2014, machine/vehicle number: 101453, functionality: fully functional, power: 368.5 kW (501.02 HP), pressing force: 4,000 t, stroke length: 1,600 mm, operating speed: 200 mm/s, ram plate width: 1,900 mm, ram plate length: 1,900 mm, clearance between the columns: 6,500 mm, overall weight: 4,80,000 kg, Fagor JBe-4000-2.5x2.5-2013 4,000T Hydraulic Forming Press (2014) 0–4,000 tonnes variable ram pressure 1,900mm ram diameter 2,500 mm x 2,500 mm T slotted top platten 2,500 mm x 2,500 mm T slotted bottom platen 6,500 mm distance between side columns 1,600 mm length of ram stroke 200 mm/s ram speed 12 mm/s pressing speed 368.5 kW total electrical power 480 tonnes total weight of machine 2x overhead travelling workpiece manipulation cranes with independently supported runway, each with 2x 16 tonne capacity hoists Siemens programmable touch screen console for machine and cranes Dcodpfx Asyzr Hfoa Njg

Condition: new, Year of construction: 2026, functionality: fully functional, pressing force: 6 t, stroke length: 80 mm, throat depth: 500 mm, total length: 780 mm, total width: 610 mm, total height: 1,700 mm, working height: 1,033 mm, Equipment: documentation/manual, STANDARD DESCRIPTION: Djdsy Efb Depfx Aa Nocg HIDROGARNE hydraulic inserters are designed for insertion and clinching operations, offering robustness, precision, and reliability. These machines are compact, with a small footprint, and completely hydraulic, ensuring accurate insertion at any point along the punch stroke. They are capable of clinching work on thicknesses from 1 to 6 mm and inserting any type of insert in materials such as copper, aluminum, carbon steel, and stainless steel. • 6 tons • 3 kW • Adjustable stroke from 0–80 mm • Throat depth: 500 mm • Working height: 1,090 mm • Total width (front): 610 mm • Total width (side): 780 mm • Overall height: 1,800 mm • Weight: 550 kg The analog hydraulic inserters are designed for standard production applications and repetitive tasks, where ease of use and reliability are prioritized. They feature a dual integrated safety system, operation via dual electric safety foot pedal, manual pressure adjustment, and return stroke adjustment for the punch—allowing for quick and effective setup of the insertion process. OPTIONS: • Automatic insert feeding system (NC models) • Four-station turret system with automatic working position detection (NC models) • High-efficiency inverter system (start-stop) • Laser pointer

Year of construction: 2011, condition: ready for operation (used), General Data Machine weight 4700 kg Control Unit Brand AMADA Main Drive Pressing force 500 kN Stroke 200 mm Number of axis 8 This 8-axis AMADA HFE M2 5020 was manufactured in 2011. It features a hydraulic press brake with a maximum press force of 500 kN and a stroke up to 200 mm. Weighing 4,700 kg and operating at a noise level of 74 dB(A), it's CE certified and made in France. If you are looking to get high quality bending capabilities consider the AMADA HFE M2 5020 machine we have for sale. Contact us for more information. Application Types Bending Djdpfxex D H I Hs Aa Njcg

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, pressing force: 15 t, bale width: 700 mm, bale height: 700 mm, bale weight: 220 kg, input voltage: 400 V, power: 4 kW (5.44 HP), empty load weight: 2,700 kg, Manufacturer: Borg Baling Company Type: S-15KK Year of production: 2002 Dcodoh Dy Rfopfx Aa Neg 3x400V, 4kW, 14.5A Compression force: 15t Net weight: 2.7 t Bale max. sizes 700x700x1000 mm weight of a bale: ca 120 – 220kg Wide Range of Used Machinery, Industrial Equipment

Condition: new, neu ca. 8 Wochen ab Auftragse Italien 11000 € 211.2 € 50 to fix 350 mm 900 mm 900 mm max. 9 mm/s 0,75 kW 1700 mm 700 mm Dcodpfx Aaewiq Aho Neg 2100 mm 650 kg The hydraulic movement of the piston is controlled by a handwheel, which enables very sensitive and precise positioning. One-handed operation is possible thanks to the working speed of less than 10 mm/s. Very suitable for straightening and pressing work. The cylinder can be moved sideway by handwheel (only "M" versions)

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 5500 € 106.15 € 30 to fix 775 mm 5 mm/s 10 mm/s 1500 mm 700 mm 2015 mm 400 kg steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever Djdpoypbxfefx Aa Nscg according to CE regulations user manual in GERMAN and ENGLISH

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 8900 € 171.77 € 100 to fix 300 mm 1570 mm 220x160 mm 5 mm/s 10 mm/s 2500 mm 1000 mm 2200 mm 1600 kg steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable Dcodpfxjypbw Ue Aa Nog table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH

Condition: new, neu ca. 6-8 Wochen ab Auftrag Italien 6500 € 125.45 € 70 to fix 900 mm 900 mm 1700 mm 700 mm 2100 (PSS: 2300) mm The table can be lifted with a chain Hydraulic unit with motor and pump Adjustable maximum pressure Manometer Equipment compliant with CE regulations. Operating instructions in German and English. MODEL VERSIONS: PSS 70 TL: 1 speed 4 mm/s, single-hand control with lever € 6.500,00 Dcjdpfxjypbwzo Aa Neg PSS 70 L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 7.200,00 PSS 70 NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 7.900,00 PSS 70: same as PSS 70 NC but with stroke 500 mm € 8.700,00

Condition: new, neu ca. 6-8 Wochen ab Auftrag Italien 8600 € 165.98 € 100 to horizontal verschiebbar 900 mm 1050 mm 1900 mm 1000 mm 2250 (PSS: 2400) mm The table can be lifted with a chain Hydraulic unit with motor and pump Adjustable maximum pressure Manometer Equipment compliant with CE regulations. Operating instructions in German and English. MODEL VERSIONS: PSS 100 M TL: 1 speed 4 mm/s, single-hand control with lever € 8.600,00 PSS 100 M L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 9.300,00 PSS 100 M NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 9.900,00 PSS 100 M: same as PSS 70 M NC but with stroke 500 mm Dodpfxoypbwue Aa Necg € 11.400,00

Condition: new, Year of construction: 2023, neu 2023 7295 ca. 12 Wochen ab Auftrags Türkei 22750 € 436.8 € 150 to fix 1520 mm 300 mm 1520 mm 610 mm 9 mm/s 5 mm/s 10 mm/s 10 mm 600x1520 mm 100 mm 190 mm 2630 mm 1000 mm 2450 mm 3270 kg 2 guidings big upper tool holder and table with t-slots upper and lower pressbrake tool Dcodpeypbwnjfx Aa Nsg manometer rapid down move with automtic change to working speed piston stops in every position 2 hand panel and foot pedal Tisch höhenverstellbar according to CE regulations user manual in GERMAN and ENGLISH

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 6500 € Dodpfx Aaoypbwhj Njcg 125.45 € 60 to fix 250 mm 1040 mm 180x120 mm 4 mm/s 10 mm/s 1710 mm 700 mm 2100 mm 800 kg steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH user manual in GERMAN and ENGLISH

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 7300 € 140.89 € 60 to horizontal verschiebbar 250 mm 1040 mm 180x120 mm 4 mm/s 10 mm/s 1710 mm 700 mm 2100 mm 800 kg Dsdpfxoypbwbo Aa Njcg horizontal adjustable cylinder with clamping lever steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 6200 € 119.66 € 30 to horizontal verschiebbar 200 mm Dcodpfx Ajypbv Roa Nsg 775 mm 125x80 mm 5 mm/s 10 mm/s 1500 mm 700 mm 1800 mm 400 kg horizontal adjustable cylinder with clamping lever steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 11500 € 220.8 € 150 to fix 300 mm 1570 mm 280x200 mm Dcsdpfx Asypbv Dea Nsg 5 mm/s 10 mm/s 2500 mm 1000 mm 2270 mm 2100 kg steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 10200 € 195.84 € 150 to fix 300 mm 1070 mm 280x200 mm 5 mm/s 10 mm/s 2050 mm 1000 mm 2270 mm 1870 kg steel welded frame Dcsdpfxoypbvwo Aa Nsg stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH

Condition: new, neu ca. 6-8 Wochen ab Auftrag Italien 5000 € 117.73 € 40 to fix 900 mm 900 mm 1600 mm 700 mm 2050 (PSS: 2250) mm The table can be lifted with a chain Dcjdpfeypbvqex Aa Njg Hydraulic unit with motor and pump Adjustable maximum pressure Manometer Equipment compliant with CE regulations. Operating instructions in German and English. MODEL VERSIONS: PSS 40 TL: 1 speed 4 mm/s, single-hand control with lever € 5.000,00 PSS 40 L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 5.800,00 PSS 40 NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 6.100,00 PSS 40: same as PSS 40 NC but with stroke 500 mm € 7.000,00

Condition: new, neu Dcjdpjypbvkefx Aa Neg ca. 12 Wochen ab Auftrags Türkei 30900 € 590.19 € 200 to horizontal verschiebbar 300 mm 1900 mm 320x210 mm 5 mm/s 20 mm/s 2460 mm 1600 mm 2700 mm 4800 kg horizontal movable cylinder by handwheel steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH (sample photo shows mod. HDK 1570/150)

Condition: new, neu ca. 4 Monate ab Auftragse Italien 70000 € 1323 € 300 to fix 500 mm 1500 mm 20 mm/s Dedpfx Aasypbvde Necg 2 mm/s 2800 mm 1500 mm 3200 mm 6000 kg table with integrated cylinder to lift the workpiece control by levers as well as control panel (2- hand) regulable maximum pressure Manometer according to CE regulations user manual in GERMAN and ENGLISH (sample photo)

Condition: new, neu ca. 4 Monate ab Auftragse Italien Dcjdpfx Aajypbu Ts Njg 26500 € 506.15 € 100 to horizontal verschiebbar 500 mm 700 mm 1050 mm 25 mm/s 2 mm/s 1900 mm 1200 mm 2450 mm 1770 kg HORIZONTAL MOVABLE CYLINDER 600 MM 2 speeds control by handwheel and push button (2-hand) adjustable max. pressure manometer according to CE regulations user manual in GERMAN and ENGLISH (sample photo)

Condition: new, neu Dodpsypbu Hefx Aa Necg ca. 4 Monate ab Auftragse Italien 18000 € 345.6 € 40 to fix 500 mm 700 mm 900 mm 29 mm/s 4 mm/s 1600 mm 1000 mm 2350 mm 790 kg 2 speeds control by handwheel and push button (2-hand) adjustable max. pressure manometer according to CE regulations user manual in GERMAN and ENGLISH (sample photo)

Condition: new, neu ca. 4 Monate ab Auftragse Italien 20800 € 399.36 € Dcedpfsypbuysx Aa Njg 70 to horizontal verschiebbar 500 mm 700 mm 900 mm 20 mm/s 2 mm/s 1700 mm 1000 mm 2400 mm 1050 kg HORIZONTAL MOVABLE CYLINDER550 MM 2 speeds control by handwheel and push button (2-hand) adjustable max. pressure manometer according to CE regulations user manual in GERMAN and ENGLISH (sample photo)

Condition: new, neu Dcodpoypbutefx Aa Neg ca. 14 - 16 Wochen ab Auf Italien 38000 € 725.8 € 100 to fix 1250 mm 500 mm 780 mm 1500 mm 25 mm/s 10 mm/s 4 mm/s 1300x600 mm 1250x400 mm 2400 mm 1200 mm 2450 mm 2450 kg Hydraulic multifunction workshop press for pressing and straightening and optional bending Version A (automatik): with 2-hand panel with limit micron switch for up/downstroke stop, automatic piston retraction, Siemens CPU Version S (semiautomatik): 2-hand function by hand lever and pushbutton, limit micron switch for up/downstroke stop Standardmodel for pressing and straightening: table with t-sloats and straightening punch OPTIONS: Bending accessorie with tool holder, upper tool, dies with 4 slots and 2 frontal support arms Mobile truck for quick assembly/disassembly of bending unit Siemens control Pressure switch Heat exchanger Piece counter Timer Plate supports for the rear side Safety light guard ALTERNATIVE: Version S (semiautomatik) € 30.000,00

Condition: new, neu ca. 14 - 16 Wochen ab Auf Italien 34500 € 658.95 € 100 to fix 835 mm Dsdjypbumspfx Aa Nocg 500 mm 780 mm 1050 mm 25 mm/s 10 mm/s 4 mm/s 800 x 600 mm 700 x 350 mm 1800 mm 1000 mm 2400 mm 2050 kg Hydraulic multifunction workshop press for pressing and straightening and optional bending Version A (automatik): with 2-hand panel with limit micron switch for up/downstroke stop, automatic piston retraction, Siemens CPU Version S (semiautomatik): 2-hand function by hand lever and pushbutton, limit micron switch for up/downstroke stop Standardmodel for pressing and straightening: table with t-sloats and straightening punch OPTIONS: Bending accessorie with tool holder, upper tool, dies with 4 slots and 2 frontal support arms Mobile truck for quick assembly/disassembly of bending unit Siemens control Pressure switch Heat exchanger Piece counter Timer Plate supports for the rear side Safety light guard ALTERNATIVE: Version S (semiautomatik) € 26.000,00