Used Inverted Pin Router for sale (34,275)

Condition: good (used), Year of construction: 1995, turning diameter over bed slide: 810 mm, swing diameter over cross slide: 510 mm, quill stroke: 225 mm, quill diameter: 115 mm, center height: 400 mm, spindle speed (min.): 1 rpm, spindle speed (max.): 1,800 rpm, bed width: 480 mm, overall weight: 6,400 kg, torque: 3,150 Nm, We are offering you a lathe from the brand "VOEST ALPINE" (WEILER), model E80/3. Knedpfxew Tq Tyo Aaboc For further details, please refer to the attached PDF. The extensive range of accessories is also listed there. Best regards, Wiegand Co.

Condition: good (used), Year of construction: 2008, Ref. -No.: 10474 Manufacturer: SPINNER Type: TC77 MCY Year of construction: 2008 Knsdsxmd Tfjpfx Aabjc Type of control: CNC Control: Siemens 840 D Storage location: Halberstadt Country of origin: Germany Machine-No.: AP0XXXXX Chuck diameter: 210 mm Tailstock - diameter: 110 mm Feed speed X / Z: 15/24 mm / min Turning Diameter: 500 mm Max. Torque: 113 Nm Travel -X Axis: 350 mm Travel -Y Axis: 230mm (-110mm +120mm) mm Travel -Z Axis: 1160/1840mm mm Distance Between Centres: 800 / 1500 mm Spindle 1 spindle head diameter (flange): A8 mm Spindle 2 spindle head diameter (flange): A6 mm Quills Morse taper: MK4 Turret places: 12 Pcs Machine length: 3250 mm Machine width: 1980 mm Machine Height: 2090 mm Weight Of The Machine Ca.: 7,5 t Max. swing diameter: 690 mm Further information: Spindle head: A8 Bar capacity: 77mm Bar capacity: 52mm Number of rotating tool positions: 12 Y axis + C axis. Machine can be inspected under power by arrangement.

Condition: like new (used), Year of construction: 2022, Hot stamping plate dimension(W*L): 330mm* 260mm Die cutting plate dimension(W*L): 330mm* 350mm Kjdop H Swdjpfx Aabjnc Max.unwind roll diameter& Max.rewind roll diameter: 650mm(can load 2000 meters material) Max.speed: 23000 times/h Applicable blade height: 7mm-23mm Applicable hot stamping tooling height: 1.5-4mm Die cutting accuracy: 0.1mm Hot stamping accuracy: 0.2mm Dimensions: 5300mmx1300mmx1700mm Voltage/current: 3 phase 380V/32A Main motor power :7.5KW Gross power: 15KW Total weight: About 4000KG

Condition: used, Year of construction: 2015, Machine weight: 9,000 kg, HEIDENHAIN control terminal, clamping table size: approx. 130x70 cm, 30-position tool changer, chip conveyor, mobile band filter. Kjdpsxnal Tefx Aabsnc

Year of construction: 2007, condition: ready for operation (used), Control Unit Knedpfx Aasxl Hzisboc Brand SIEMENS Model 840D Main Drive Spindle motor power 35 KW Number of axis 4 Turret Number of turrets 1 Tools Number of index 12 This 4-axis SPINNER TC 77 was manufactured in 2007. A robust horizontal turning machine, it offers precision and reliability for various turning applications. If you are looking to get high-quality turning capabilities, consider the SPINNER TC 77 machine we have for sale. Contact us for more information. Application Types Turning

Condition: excellent (used), functionality: fully functional, Brother Hi-Spin riveting machine 5mm high spin Type: BR1-103 - Crimping ability (Mild steel rivet) φ5mm or less - Spinning head: 20-40mm - Distance between tabletop and punch: 60-180mm - Table working surface size: 310 x 180mm - Processing time setting range: 0.3-5 seconds Kedpfowdwv Rox Aabonc - Normal pressure: (Varies depending on pressing conditions) 2-5kg/cm2 Air consumption: Power supply and motor Three-phase 200V 0.2kw 4Pole Machine size Width 390 x depth 510 x height 1000mm Machine weight 95kg

Condition: used, A used well preserved guillotine shear Vöest Alpine cutting length: 2010 mm cutting capacity in steel up to 370N/mm² tensile strength: 5 mm strokes per minute: 50 H/min Hold down pressure: 30 bar number of hold-downs: 8 pcs. backgauge manually adjustable: 950 mm throat depth: 150mm dimensions: LxWxH 280x190x140cm Knsdpfx Aajpgmpdebsc weight: 2500 kg

Condition: good (used), Year of construction: 2005, Ref. -No.: 10314 Manufacturer: PINACHO Type: S-90/ 310-155 Year of construction: 2005 Type of control: Konventionell Storage location: Halberstadt Country of origin: Spain Bar passage: 90 mm Travel quill: 180 mm Turning Diameter: 630 mm Turning Length: 3000 mm Turning Diameter Over Bed: 620 mm Tip length: 3000 Cross Movement. (X-Axis): 365 mm Spindle Bore: 155 mm Tailstock Quill Diameter: 72 mm Turning diameter over cross slide: 880 mm Jaw chuck diameter: 380 mm Turning Speed Range: 16 - 750 rpm Kjdpfxjxmd R De Aabonc Further information: - The lathe has two jaw chucks on the headstock - metric, Whitworth and inch trapezoidal threads can be turned - adjustable feeds for cross face and longitudinal face turning (0.05 to 1.5 mm/u)

Condition: excellent (used), Year of construction: 2016, operating hours: 27 h, SBL 1060 SE Year: 2016 Sheet feeder: Manual non-stop pile feeder Material range: Paper and board from 470 × 350 mm to 1060 × 760 mm Max cutting format: 1050 × 740 mm Min sheet size: 470 × 350 mm Max sheet size: 1060 × 760 mm Max cutting pressure: 300 tons Material thickness: 0.1 – 2 mm (corrugated/laminated max 4 mm) Min gripper margin: 9.5 mm Max inside chase size: 1155 × 852 mm Cutting plate size: 1076 × 756 mm Max speed: 8,000 sheets/hour Power consumption: Total 32 kW (22 kW + 10 kW for lower plate heating) Machine dimensions (L×W×H): 5,900 × 5,700 × 2,615 mm Max pile height – feeder (with pallet): 1,750 mm Max pile height – delivery (with pallet): 1,450 mm Feeder Section - Pneumatic feeder table - Non-stop manual feeder system - Anti-static system - Pre-pile device - Manual suction group adjustment Knjdpswypp Iofx Aabsc - Micrometric suction adjustment - Motorized side pile adjustment - Suction belt feeder table - High-pressure lubrication pump - 2 pneumatic side register guides - Electronic control of front and side register Cutting/Embossing Section - Automatic pressure adjustment up to 300 tons - Preparation and introduction table for die frames in platen - 2 quick-lock die chase frames with bottom plate - Pneumatic locking of the chase and lower supporting plate - Centerline System - Micrometric system - Heated lower support plate (24 mm) - Cutting plate: 4 mm - Compensation plate: 3 mm - Archiveable 1 mm thin cutting plate Stripping Section - Quick lock for upper and central stripper frames - 2 standard upper stripper frames - 2 standard lower stripper frames - Double accessory kit for lower stripper prep (pins, bars, clamps, etc.) Delivery Section - High-pile automatic non-stop delivery with conveyor - Guillotine for automatic removal of gripper margin waste - Sheet deceleration device - Tab insertion device

Condition: used, Dimensions (LxBxH): 130 x 260 x 175 cm Price: On request - Number of spindles [pcs.]: 4 - └ Spindle 1: - - Spindle diameter [mm]: 50 - - Max. planing block diameter [mm]: 120 - └ Spindle 2: - - Motor power [kW]: 11 - - Spindle diameter [mm]: 50 - - Max. planing block diameter [mm]: 120 - └ Spindle 3: - - Motor power [kW]: 11 - - Spindle diameter [mm]: 50 - - Max. planing block diameter [mm]: 120 Ksdpfewniy Nsx Aabonc - └ Spindle 4: - - Spindle diameter [mm]: 50 - - Max. planing block diameter [mm]: 120 - Max. planing width [mm]: 500 - Max. planing height [mm]: 200 - Feed table length [mm]: 650 - Diameter extraction nozzle [mm]: 180 - Documentation available: No - Transport dimensions: 1300mm x 2600mm x 1750mm (l x w x h) - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2007, condition: ready for operation (used), Control Unit Brand SIEMENS Model 840D Main Drive Spindle motor power 35 kW Additional Equipment Number of Driven Tools: 12 This 4-axis SPINNER TC 110 was manufactured in 2007. A horizontal turning machine, it offers robust performance for precision tasks. Ideal for those seeking reliable turning capabilities. Contact us for more information. Knodpfxjxl Hy Es Aaboc Application Types Turning

Condition: good (used), Year of construction: 1989, Vertical crushing plant Voest Alpine ZS 100 Basic year of construction 1989 (machine/rotor completely overhauled) Knsdpfxju U Ukio Aaboc Machine number 89 914 04 incl. drive motor 145 KW

Condition: reconditioned (used), CUTTER Model: SWV 330-S Vacuum TIPPER TIE 2007/2008 - MACHINE AFTER GENERAL OVERHAUL THIS IS THE MODEL - TIPPER TIE ALPINA AG WITH A NEW CONTROLLER - ALL SPARE PARTS ARE AVAILABLE FOR THIS MODEL. Height: 2250 mm Width: 3300 mm Length: 2800 mm Capacity: 330 l Bowl construction - stainless steel Knife construction - stainless steel Electric power supply: 400V 50Hz 3N Knedpfxst Sv Ule Aaboc Total power: 141 KW - Knife rotation: 540/960/1930/2880/3850/4050.-smooth adjustment - Bowl rotation: 3.5 / 6.5 / 10 / 13.5 - Mixing speed: -70/120 - bowl rotates to the left - Power: 141 kW - Weight approx. 7800 kg - Number of knives – 6 pcs. - THE MACHINE HAS A 3-MONTH WARRANTY ON MECHANICAL PARTS

Condition: good (used), Year of construction: 2004, functionality: fully functional, Fanuc control, spindle bore 66 mm, sub-spindle, bar feeder, chip conveyor, parts conveyor belt. Kedpow Ibudjfx Aabjnc

Condition: used, Year of construction: 2014, For sale: 1 CNC lathe Spinner TTC 300, year of manufacture 2014, including single bar loader. The machines are in very good condition, have been serviced regularly, and are ready for immediate use. Kedpfxjw Rbb Ao Aabsnc

Condition: used, Year of construction: 2003, - Fagor 8055 CNC control - Operating modes: manual/cycle-controlled - 8-fold tool turret VDI40 - Year of construction 2003 Technical data Capacity: - Center height: 200 mm - Center width: 1000 mm - Permissible Ø over guide bed: 400 mm - Permissible Ø over longitudinal slide: 370 mm - Permissible Ø over cross slide: 210 mm - Bed width: 300 mm Headstock: - Bore of main spindle: 65 mm - Main spindle nose: Camlock-n°6 / DIN 55027-n°6 - Morse taper of the main spindle: 5 - Spindle speeds: 2 - Constant cutting speed: 0-700 / 700-3000 rpm Feed rates: - Working feed Z/X: 0 - 7000 mm/min - Rapid traverse Z/X: 10 m/min Tailstock: - Tailstock shank Ø: 58 mm - Tailstock shank travel: 155 mm - Morse taper tailstock: 4 Motors: - Main motor power: 7.5 kW - DC motor Z-axis power: 12 Nm - DC motor X-axis power: 4 Nm - Motor pump power: 0.57 kW Dimensions: - Machine weight: approx. 2200 kg - Dimensions WxHxD: 2980 x 1730 x 1610 mm Kjdpfouwrz Hsx Aabenc

Condition: ready for operation (used), Year of construction: 2008, Control Unit Brand HEIDENHAIN Model iTNC 530 Knodsxlvbljpfx Aabec Main Drive Spindle speed range 8000 Number of axis 3 Movement X-Axis Movement 1145 mm Y-Axis Movement 615 mm Z-Axis Movement 615 mm Additional Equipment Equipment: Automatic tool changer, coolant system with internal cooling This 3-axis Pinnacle LV116 vertical machining center was manufactured in 2008. It offers robust and precise machining capabilities, ideal for a variety of applications. If you are looking to get high-quality milling capabilities, consider the Pinnacle LV116 machine we have for sale. Contact us for more information. Application Types Milling

Year of construction: 2015, condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant The Bexmill A BM is a basket type mill or conical mill that can process soft to medium-hard substances. The gentle communition ensures the required particle size is obtained in one pass avoiding product damage and generating a minimum amount of fines. It can be operated both continuously and batchwise. A variety of screens are available in different shapes and opening sizes, they can be quickly exchanged without the use of tools to adapt to the desired task. Additionally the gap between the rotor and the sieve can be adjusted. Due to its conical form the Bexmill A BM can be operated in contrast to the classic Flake Crusher at higher revolutions. Through this larger throughputs and higher fineness can be achieved. The product spectrum ranges from wet to dry feed material. Applications: - Crushing of flakes - After mixer agglomeration Knodpfxef H Akbs Aabec - Homogenisation of mixtures - Disintegration of agglomerates - After fluid beds and kilns - Finishing of granulates Motor: 4kW

Condition: ready for operation (used), Year of construction: 2012, Control Unit Brand MITSUBISHI Model M720 SSS Main Drive Spindle speed range 15000 Knedpfx Asxfwxxjabsc Tool taper ISO40 Number of axis 5 Movement X-Axis Movement 1140 mm Y-Axis Movement 610 mm Z-Axis Movement 810 mm Table Table load 850 kg Additional Equipment Air blast through spindle Rotary table with counter-support and hydraulic lock – 360° rotation Heidenhain linear scales on X, Y, Z axes; rotary encoders on A and C axes Coolant through spindle, 20 bar + low-pressure cooling system Renishaw OMP60 workpiece probe + receiver // Renishaw TS27R tool probe Chip flushing system Chain-type chip conveyor Telescopic covers for X, Y, Z axes Full machine enclosure with safety door lock Central lubrication system with oil cooler This 5-axis Pinnacle BX300A was manufactured in 2012. It features a spindle speed of 15,000 rpm, a table size of 1300 × 610 mm, and a 24-position tool magazine. Equipped with a Mitsubishi M720VS control system, it supports complex machining with continuous rotation on the C-axis and tilting on the B-axis. Consider the opportunity to buy this Pinnacle BX300A vertical machining centre. Contact us for more information about this machine. Application Types Milling

Year of construction: 1996, condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Kjdpfx Aaohrndmebsnc Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Alpine Rotoplex RO 40/63. This cutting mill with Patented cross-scissor-cut rotor guarantees optimal material distribution at maximum cutting performance. Hinge-back screen support permits easy screen removal and perfect access to clean the machine and to exchange the knives. Perfect for industries such as recycling (for blow film, cables, plastics, etc.) and food (tee, spices, dried vegetables, etc.). Technical data: Material of construction: cast iron/mild steel Non pressure shock resistant (NPSR) Scope: Mill with installation table, 30kW motor and suction tank

Year of construction: 2005, condition: like new (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant With the Bexmill A BM soft to medium-hard substances are crushed gently. The Bexmill is also called basket type mill or conical mill. The mill can be charged both, continuously and discontinuously. From the feed unit the material to be crushed reaches the grinding area. Due to its conical form the Bexmill A BM can be operated in contrast to the classic Flake Crusher at higher revolutions. Through this larger throughputs and higher fineness can be achieved. The product spectrum ranges from wet to dry feed material. Knedpfx Asfkgxmeabec Applications: - Crushing of flakes - After mixer agglomeration - Homogenisation of mixtures - Disintegration of agglomerates - After fluid beds and kilns - Finishing of granulates

Year of construction: 2010, condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant Hosokawa Alpine 250 TTSP air classifier specifically designed to produce the perfect fineness cut for toner, can be used in connection with the Alpine 630 TFG jet mill Design: Knedpfx Aogulqhjabjc non PSR Material of construction - product contacting parts: mild steel - none product contacting parts: mild steel Wear protection: without Scope: 250 TTSP with 2 x 5,5kW motors, process gas distributor, filter, blower

Year of construction: 2023, condition: new, Rental system Hosokawa Alpine AS 200 Baseline. TECHNICAL DATA Chamber diameter 200 mm Gas pressure range 2 – 8 bar (g) Fineness range d50 1 – 40 μm Bn83a7ch Nominal gas flow 150 – 200 Nm³/h Dimensions (l/w/h) (without aspirator) 1.2 x 0.8 x 1.3 m Power supply 230 V; 2.2 kW Knsdpfxsm Nbnre Aabec REFERENCE PRODUCTS Product / End fineness / Throughput Celecoxib 90% ᐸ 23 μm 33 kg/h Nifedipine 90% ᐸ 2.4 μm 8 kg/h Progesterone 90% ᐸ 9 μm 20 kg/h Diosmin 90% ᐸ 4 μm 8 kg/h Omeprazole 99% ᐸ 5 μm 3 kg/h Cosmetic powder 90% ᐸ 10 μm 15 kg/h A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Year of construction: 2002, condition: reconditioned (used), functionality: fully functional, Fully refurbished Hosokawa Alpine UPZ 160 Pharma used system by Alpine Originals. The Hosokawa Alpine Ultraplex UPZ is a universal fine impact mill. It is used to grind soft dry materials. This micronizer is perfect to pulverize different coarse products down to a finer powder and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetics, recycling, etc. This grinder can be used for the pre-cut of different materials. It is able to process coarse products up to approx. 3 Mohs´ hardness by reaching medium to fine particles with end-product fineness values between d97 150 to 850 microns (µm) top size (product dependent) at the lowest possible energy consumption. The turbo mill can reach this wide final product range thanks to a variety of easily interchangeable grinding tools such as pin disc, plate beater, beater disc or pendulum beater. Certain grinding tools can operate together with different grinding tracks (liners), sieves or a combination of both, to achieve the desired fineness. This allows the same machine to process many different products such as fibrous roots or spices to plastics, granulated chemicals or mineral products. The comminution takes place inside the grinding chamber where the rotor plate fitted with grinding tools impacts and projects the particles against the grinding track or sieve (if fitted) reducing their size. The process gas then transports the fines to the mill outlet towards the next stage, normally the filter. Sometimes a cyclone is installed between the mill and filter or even a secondary air classifier. Thanks to the required process air volume, reduced temperature increase during grinding is to be expected compared to other granulation and crushing technologies. Adjusting the final particle size distribution can be easily done by changing different parameters, such as the speed of the grinding rotor or disc, the type of grinding tool and liner, air volume, feeding rate, etc. Technical details Pharma design, in stainless steel: product contacted parts AISI 316/316L gas contacted parts at least AISI 304 non contacted parts stainless steel Gas recirculation, suitable for inert N2 operation non pressure shock resistant (NPSR) TO BE CONFIRMED Knedjrvil Tepfx Aaboc Scope of supply Pharmaceutical system comprising: feed material container docking station with dosing screw, rotary valve, 160 UPZ mill in tangential discharge design and installed on a mobile platform, with a 7,5kW motor isolated from the mill production area, piping, filter and discharge closing valve, heat exchanger, blower, platform with stairs, etc. TO BE CONFIRMED A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Year of construction: 1997, condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant Used Hosokawa Alpine ACM 30 classifier mill, in normal steel, NPSR, non ATEX. Consisting of complete mill with motors Features and advantages of the ACM classifier mill: • Grinding and classifying in one machine. • Excellent precision of cut, steep particle size distributions. Knsdeg Uwa Njpfx Aaboc • Steplessly adjustable cut point. • Flow-optimised conical classifying wheel guarantees fines with no oversize particles and low wear in comparison to cylindrical classifying wheels. • Cool and gentle grinding thanks to high air flow rate. The ACM is thus ideally suitable for processing temperature-sensitive products. • Deflection zone in grinding chamber cover: classifier gap rinsing not necessary. • Low noise emission. • Smooth running characteristics as a result of the belt-driven grinding disc. • Simple to maintain: motors and bearings easily accessible. • Cover lifting device ensures fast access to the grinding and classifying zone for cleaning and retrofitting. • Extremely compact and space-saving design. • Optional: wear-protected design. Mill drive: 22 kW Mill speed: 5.100 rpm Classifier drive: 5,5 kW Classifier speed: 4.900 rpm Air volume: 2.700 Nm/m³