Used Keg Turners for sale (246)

Condition: used, SPRINGER revolver log turner Nwjdszdq N Iepfx Ad Iek

Condition: used, Year of construction: 2025, Overview This fully automatic KEG cleaning and filling system from ATS Wibbing GmbH, built in 2025, is consisting of an external KEG washer (AW 75), a KEG cleaning and filling machine (HRF 101), as well as a complete supply and transport system. The system is designed for the processing of a wide range of KEG formats. With an output of approx. 30–35 KEG/h, the installation is suitable for small and medium-sized breweries or beverage producers. The line is equipped with a Siemens S7-1500 control system and touchscreen HMI, allowing fully automatic operation with guided user interface. The scope includes a complete transport system, supply tanks with dosing and conductivity measurement, as well as all required piping between the machine and media tanks. The system is offered with 2 years manufacturer warranty and is available within approximately 2-3 months. The attached project layout drawing illustrates the complete system arrangement including KEG washer, cleaning/filling machine, conveyor sections, pallet handling aid, supply station, and expansion vessel. Technical Data - Manufacturer: ATS Wibbing GmbH Nsdpfxjy Rk Igo Ad Iowk - Machine Type: Fully automatic KEG cleaning and filling line - Main Components: ATS external washer AW 75, ATS cleaning and filling machine HRF 101, Supply and transport system - Year of Manufacture: 2025 - Availability: approx. 2-3 months - Capacity: approx. 30 – 35 KEG/h - Suitable KEG Formats: Stainless steel KEGs, Plus-KEGs, Party-KEGs, Containers, Diameter range: 160 – 420 mm, Height range: 280 – 600 mm - Control System: Siemens S7-1500 - HMI: Touchpanel with operator guidance - External Washer AW 75: Indexed pass-through operation, Circulation bath approx. 270 l, Spray pump 2.2 kW, Bag filter with pressure monitoring - Cleaning & Filling Machine HRF 101: Stainless steel control cabinet, Fully automatic cleaning and filling process - Transport System: Roller conveyor and chain conveyor sections, Complete electrical and sensor equipment, Cable trays included - Supply System: 4 stacked tanks (150 l each, 120 l usable volume), 3 tanks with heating, Stainless steel pumps, Temperature control and dry-run protection, Temperature and level indication, 2 conductivity measurement systems with dosing pumps, Complete piping between machine and tanks, Pressure and temperature monitoring for product, CO2, sterile air, and steam, Separate control cabinet - Expansion vessel 150 l - Pallet handling aid - Required Utilities: Sterile air: approx. 3 bar, Working air: approx. 6 bar, CO2: approx. 2–3 bar, Steam: max. 3 bar, Water supply: min. 50°C - Warranty: 2 years manufacturer warranty

Condition: used, Year of construction: 2013, Overview This KeyKeg filling machine, MICROMAT M1/1‑F KeyKeg, was manufactured in 2013 by Germany m+f KEG Technik. Nsdpsyq Ia Esfx Ad Iowk The machine is designed for filling KeyKegs and was used in a brewery. The equipment is no longer required by the seller and can be visited at any time on request. Technical data  - Formats: KeyKeg - Application: KEG filling - Operating pressure: 5.5 bar - Electrical supply: 230/400 VAC - Control voltage: 24 VDC - Frequency: 50 Hz  

Condition: used, Year of construction: 2020, Overview  This semi-automatic keg washer was manufactured in 2020 by Italian company SIFA. The Idrokeg 21 is equipped with two cleaning heads and designed for efficient steam-heated keg washing. With a capacity of up to 12 kegs per hour, it is suitable for small to medium-sized breweries. The unit is in very good condition, ready for immediate use, and comes with dedicated tanks, pumps, and cleaning features. Nedpfx Aoxcul Dod Iowk Technical data  - Capacity: 12 kegs/hour - Cleaning stations: 2 - Heating: Steam - Formats: S-type kegs

Condition: used, CNC control, power supply, power supply, switching power supply, power supply, servo module, control unit, Promodul Nodpsrfztwofx Ad Iewk -Manufacturer: Schleicher, Promodul control unit from Ilsemann KCD 1 packaging machine -Type: KEG 24-30 -Dimension: 600/145/H180 mm -Weight: 7.7 kg

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, BuschGraph Busch SE 90 stack turner, for turning only (without ventilation system) with fixed control panel Max. sheet size: 600 x 750 mm Max. stack height: 1200 mm Nodszpa Uqopfx Ad Iswk Min. stack height: 290 mm Platform width: 900 mm Platform depth: 620 mm Load capacity: 500 kg

Year of construction: 1998, condition: ready for operation (used), functionality: fully functional, The machine is operational. Nodpfx Adezkrrws Iowk Sandblasting and repainting of the paintwork and other parts are available for an additional charge upon request. Serviced. Last service: April 2025. Operating manual available. Deutz 6-cylinder engine, 240 hp. Dimensions (length/width/height): 3.45/4.65/3.35 m. Operating dimensions: Wavelength 3.88 m, diameter 1.0 m. Weight: approx. 10,000 kg. Delivery rate: 300–2,500 m³. Mileage: unknown, odometer defective. Upon request, we will gladly send you a short video of the machine in operation.

Year of construction: 2014, operating hours: 1,600 h, condition: excellent (used), functionality: fully functional, Menart STM MTRA dump truck, model year 2014, with 1640 operating hours, in very good condition and ready for work. Njdpfx Adozn H Sgs Iewk

Condition: good (used), Year of construction: 2004, machine/vehicle number: 75M1001, PILE TURNER Nsdpfx Adom E Uh Ee Iswk

Condition: used, Keg cleaning, filling and palletising system, consisting of the following components: - Keg external washer Schöttinger & Schäfer, year of manufacture 1987 Model: AW 2RB - Keg filling system Leifeld & Lemke, Year of manufacture: 1988 Consisting of: 1 line for pre-cleaning, KVR 1, Capacity: 140 kegs/hour 2 lines for main cleaning and filling, KRF1 and KRF 2 Capacity: 120 kegs/hour - CIP system with 5 containers Year of manufacture: 1988 - Palletising and depalletising RST Year of manufacture: 1999 with pallet magazine and palletising robot (KUKA KR 125/1) Additional title: Keg cleaning and filling system with palletising; built 1987 - 1999 Capacity appr.: 120 Kegs/h Operation / Control: Simatic S7-300 Nsdpoy Nm Uaefx Ad Iewk Features: External washer; pre-cleaning, main cleaning and filling lines; CIP system; palletising with pallet magazine and robot

Condition: used, Year of construction: 2019, Semi-automatic KEG system with two stations. Additional title: Keg cleaning and filling system Capacity: 30 KEG/h Power: 6 kW Current: max. 15,0 A Voltage: 400V AC Formats: 10 L, 15 L, 20 L, 30 L, 50 L KEGs, with flat fitting Running direction: left to right Nwsdpfsw Uvdyox Ad Isk Operation / Control: Control box with touchpanel, Simatic S7-300 Material: stainless steel Position: free standing Features: 2 stations, CIP station with 2 tanks, KEG infeed and outfeed roller conveyors, control cabinet with touch panel

Condition: used, Year of construction: 1990, Washing tunnel for cleaning the outside of kegs. Cleaning is carried out with water heated to 60 °C. A steam or hot water-heated bath is located in the lower part of the external washer for this purpose. Equipped with adjustable spray nozzles and a brush station. To prevent excessive water carry-over, the flap doors at the inlet and outlet close under their own weight. With device for discharging of washed-off labels. Additional title: Keg spraying and keg brushing Max. capacity: 300 Kegs/h Capacity keg filling plant: 110 Kegs/h Voltage: 220/380 V Frequency: 50 Hz Nwsdpfoxwy H Asx Ad Iek Length: ca. 2200 mm Width: ca. 1500 mm Formats: 30-litre and 50-litre kegs, EU format, with PU jacket Features: Spray jets, high-pressure pump, brush station, label discharge

Condition: used, Year of construction: 1997, KEG-plant Additional title: inside cleaning and filling plant Performance: 20 KEG`s/h wash and fill with 30 l KEGs Power: 8 kW Voltage: 400 V Frequency: 50 Hz Length: 1400 mm Width: 1100 mm Height: 2300 mm Weight: 250 kg Formats: 10 - 50 l KEG drums with flat fitting Operation / Control: OP7 operating console, Siemens Simatic S5 - 95U Material: Edelstahl Nwjdpfsxbqh Sex Ad Isk Position: frei stehend Base construction: Square tube construction on dome feet Features: 1 tank for cleaning agent, electrically heated; 1 combination cleaning and filling station with flat fitting, 1 stainless steel pump, 1 stainless steel control cabinet

Condition: used, Year of construction: 2019, KEG Filling Plant Additional title: Semi-automatic keg filling system Performance approx.: 50 KEG/h Power: 2,5 kW Voltage: 230 V Frequency: 50 - 60 Hz Heating / Cooling: steam 1.5 - 2 bar, < 125°C Water: 2 - 3 bar, 80°C Compressed air: 5 - 6 bar Length: 860 mm Width: 760 mm Height: 2530 mm Weight: 130 kg Formats: Combi fitting Ø 75 mm, World KEG fitting Operation / Control: Control cabinet, Siemens 1200, Touch panel Material: stainless steel Nwodpfxewgddyo Ad Iok Position: free standing Features: 1 filling station with elevating protective housing, Gravity roller conveyors in the inlet and outlet, control cabinet with control unit, switch panel for CIP or product inlet

Condition: used, Filler for party cans and siphon bottles; with CO2 and compressed air supply. Nwedpfx Aow Td E Aed Ijk Length: 985 mm Width: 590 mm Height: 1435 mm

Condition: used, Year of construction: 2006, Semi-automatic 5l Party Keg filling line, including 6-headed filler, capper, transport conveyors, washer and turner. Additional title: semi-automatic Capacity: 240 cph Nwjdpfjvcqpisx Ad Isk Power: 0.3 kW Current: 1,85 A Voltage: 400 V Frequency: 50 Hz Compressed air: 3.2 cbm/h at 6 bar Length: 5000 mm Width: 3000 mm Height: 2300 mm Operation / Control: SPS S7-200 Features: Single-point, semi-automatic canner Transport unit washer and turner

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: PW2000-003, workpiece weight (max.): 2,000 kg, overall weight: 1,310 kg, table length: 1,400 mm, table width: 900 mm, The machine is in like-new condition! TECHNICAL DETAILS Maximum load capacity: 2,000 kg Tables and support surfaces Number of tables: 2 Support surface per table: 1,400 x 900 mm Swiveling movement Swiveling angle of the tables: 100° Angle of the load-bearing steel profiles: 90° Table travel distances: approx. 300 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): approx. 2,600 x 1,800 x 1,300 mm Machine weight: 1,310 kg Machine operating principle: The turning device consists of two opposing tables, each with a support surface of 1400 x 900 mm. On the side of the table that is facing downwards during swiveling, the load-bearing steel profiles are angled upwards by 90° in order to securely hold the plate to be turned even in a vertical position during the 90° swiveling process. Both tables are arranged opposite each other and are swivelled by 100° using hydraulic cylinders. The tables are mounted on a load-bearing substructure, on which one table is fixed and the other is movable relative to it. The movement is carried out by hydraulic cylinders, which can move the table, which is mounted on rollers, by approximately 300 mm. The substructure also supports the hydraulic and electrical components. A hydraulic unit serves as the drive source, supplying the cylinders with oil according to the control commands. The corresponding valves are electrically and/or hydraulically controlled and initiate and maintain the movements of the tables required for their interaction until the turning process is completed. Particular attention is paid to the safety of the movements and the precise adjustment of the table movement in the interaction between pressure and tension when designing the hydraulic system. The geometry of the axes of rotation of the tables results in a change in the load effect on the tilting cylinders. The hydraulics are designed in such a way that the required performance is ensured and an overload of the components is not possible during normal operation. Corresponding filters, combined with a generously sized tank volume, ensure a high availability of the hydraulic system. Njdpfx Aezd A Rded Iswk The necessary electrical control is completely housed in a steel sheet metal enclosure, which contains all the required components. The core of the control is a PLC, in which the operating parameters are processed according to the program specification. In addition, the emergency stop function and all the relays and output units required to control the functions are installed. The turning device is operated via a control panel in which a touch panel is used to input the function parameters, such as swivel table 1 up, swivel table 1 down, move table 1 forward, move table 1 backward, swivel table 2 up, swivel table 2 down, as well as start or stop the automatic mode. In order to avoid a collision of the tables in manual operation, the PLC programming is designed in such a way that this is prevented by the data on the table position and the respective table inclination. After the emergency stop situation has been resolved, the PLC control automatically completes the turning process. The turning device is equipped with heavy-duty rollers and can therefore be moved.

Condition: used, Year of construction: 2020, Pile turner Busch SWH 90 RLA Year: 2020 Description: - Airing Nwedjuv Hulepfx Ad Iek - Vibrating - Aligning Max. size: 600 x 750 mm

Condition: used, Year of construction: 1994, functionality: fully functional, Used condition. Nedjxbpxispfx Ad Iowk

Year of construction: 2009, condition: excellent (used), machine/vehicle number: 104/1656, Size 60 x 75 cm, only for turning (without airing), with fixed control desk Njdpfxohqhcij Ad Iowk Machine nr: 104/1656

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 71M4178, The POLAR pile turner PW-4 ABV is mainly used in the medium format sector. This pile turner is characterized by high performance in a compact space and a short turning time. In addition to turning, the PW-4 ABV pile turner also offers an aeration and alignment function. This enhances stack quality and has a decisive impact on subsequent production processes. Furthermore, the ABV model version provides a vibrating function. When tilted and combined with air, this further optimizes the condition of the stacks. Pile turning Medium format Nwjdpfx Ajxfvazed Isk up to 75 x 105 cm POLAR pile turner PW-4 ABV Sheet format, max. 80 x 120 cm Load capacity, max. 1200 kg Stack height, max. *) 136.5 cm

Condition: new, Year of construction: 2026, functionality: fully functional, pallet changer: manual, Samzon MPT1700-10 Pallet Turner is equipped with the latest electronic and mechanical components. The traction group has a 2000w electrical engine. The oleo-dynamic group has a 3000w engine with an incorporated pump to obtain elevate operative times. Besides the forks are controlled by an electro-valve allowing the operator to handle their movements through simple switches over the control board. The gripper unit is made of a solid loom over there are rested on aluminum controls of polyzene runners with a high resistance and long duration. Beside the gripper is also equipped with a support surface for the paper, aligned and precise. The paper or any kind of palletizable material can also be lifted and turned over without pressure between the forks, leaving it up to the operator the choice regarding how to work. *Servo-steering – Easy movement of steering wheel. *Hydraulic locking-pawl for very easy handling of rotation. Njdpfxox Ebn Rs Ad Iowk

Year of construction: 2026, condition: new, functionality: fully functional, pallet changer: semi-automatic, Samzon Pile-turner 104LVA pile-turner is a stationary machine used for changing the pallet under a product. This model is often used in the paper-industry. A major advantage with this machine is that the platforms can close-down to 320mm, which means the Samzon Pile-turner can handle very low products. Samzon Pile-turner closes around the product with platforms, tilts back by 90 degrees, the tower is released and is rotated manually 180 degrees and once again locked. The bottom platform is then lowered back down, the platforms open, and the products has been placed on a new pallet. The pallet is fed into the machine using a pallet truck or pallet jack. Nodpew U R Tcjfx Ad Iewk The pallet turner can be delivered with a variety of extra equipment and surface treatments. Samzon 104LVA PileTurner are fully equipped with vibration and vibration.

Year of construction: 2026, condition: new, functionality: fully functional, Samzon Pile Turner PT1800-20 is a stationary stack-turning machine used to rotate pallets, erect products, change pallets or damaged pallet layers. This machine can be used for very long pallets – up to 3500 mm – and the platforms can move down to a minimum of only 400 mm. The pallet is fed into the machine using a pallet lifter or pallet truck. The machine can either rotate the product 180 degrees or up to horizontal level, depending on the need. The platforms are pressed together against the pallet and stopped by a pressure switch, which can be easily adjusted. When changing pallets, either due to a defective pallet or to change to a plastic pallet, the new pallet is placed on top of the product. The platforms press down on the product, rotate 180 degrees, and the product is now on its new pallet. Nwsdow U Rr Sjpfx Ad Ijk Pile-Turner is operated simply and easily by pressing a button on the control panel. Max opening 1800mm / minimum 400mm Max weight up to 2000kg (option 4000kg) Manual or semi-automatic operation Customer-tailored solutions.

Condition: new, Year of construction: 2026, functionality: fully functional, pallet changer: manual, Samzon MPT2000-15 Pallet Turner is equipped with the latest electronic and mechanical components. The traction group has a 2000w electrical engine. The oleo-dynamic group has a 3000w engine with an incorporated pump to obtain elevate operative times. Besides the forks are controlled by an electro-valve allowing the operator to handle their movements through simple switches over the control board. The gripper unit is made of a solid loom over there are rested on aluminum controls of polyzene runners with a high resistance and long duration. Beside the gripper is also equipped with a support surface for the paper, aligned and precise. The paper or any kind of palletizable material can also be lifted and turned over without pressure between the forks, leaving it up to the operator the choice regarding how to work. *Servo-steering – Easy movement of steering wheel. *Hydraulic locking-pawl for very easy handling of rotation. Nwedpfxow U R D Io Ad Isk