Used Keg Turners for sale (245)

Year of construction: 2013, condition: used, Complete production and filling plant for a pub brewery, consisting of the following components: 1. Milling plant Milling mill with malt feed hopper and pipe chain conveyor system for malt grist. 2. Brewhouse 2-unit brewhouse (Kaspar Schulz, built in 2013) as a brewing block with copper-clad stainless steel vessels. The wort is cooled by a separate plate heat exchanger (API Heat Transfer, built in 2013) with downstream wort aeration. There is also a hot water tank (Kaspar Schulz, 2013) with insulation and heating jacket. 3. Fermentation and storage cellar 4 cylindroconical fermentation and storage tanks (Kaspar Schulz, built in 2013) with a gross volume of 12 hl each and a maximum overpressure of 3 bar. 3 cylindroconical fermentation and storage tanks (Kaspar Schulz, 2013) with a gross volume of 25 hl each and a maximum overpressure of 3 bar. The temperature of these 7 cylindroconical fermentation and storage tanks is controlled by a common control cabinet. In addition, there are 2 further cylindroconical fermentation and storage tanks (Kaspar Schulz, built in 2013) with a gross volume of 14.7 hl each and a maximum pressure of 3 bar. The temperature of these two cylindroconical fermentation and storage tanks is controlled by another control cabinet. 4. Pressure tank cellar / serving cellar 5 upright pressure tanks (Kaspar Schulz, 2013) with clamp heads, each with a gross capacity of 10.5 hl and a maximum pressure of 3 bar. 5. Filling room Siphon filler/glass bottle filler (JS Maschinen) with 6 filling heads. Keg interior and exterior washer (Scheuer) with spray nozzles in stainless steel housing and lye tank in the base. Keg filling station with taps for direct filling of kegs from the pressure tanks. 6. Operating/supply technology Refrigeration system (Hafner-Muschler, 2013) as an ice water storage system with R404a refrigerant and 3 refrigeration compressors. Oil-free compressed air piston compressor (Kaeser, 2013) with a maximum operating pressure of 10 bar and compressed air refrigeration dryer (Kaeser, 2013). Air separator (AST) as nitrogen generator with adjacent nitrogen pressure tank. Additional title: complete brewing plant with copper-clad brewhouse Cast wort capacity: 10 hl Features: grain mill, malt transport system, 2-unit brewhouse made of stainless steel (copper clad), wort cooling, hot water tank, 9 fermentation tanks (4 x 12 hl, 3 x 25 hl, 2 x 14.7 hl), pressure tanks (5 x 10.5 hl), siphon filler, keg washing system, keg filling station, compressed air system, refrigeration system, N2 generator, Chedpfx Aley Nm I Hjfjd

Condition: used, Year of construction: 2014, Overview  This brewhouse from Hungarian manufacturer ZIP was built in 2014. It has been well maintained with regular servicing and is in outstanding condition. It has been owned by a craft lager brewery in the UK who are now upgrading due to expansion. All the equipment is still in operation and can be viewed in person.  Scope of delivery  Brewhouse, 10 HL | Zip Technologies | 2014 HLT, 1650L | Zip Technologies | 2014 Whirlpool, 10HL | Zip Technologies | 2014 CIP, 150L x 2 | Zip Technologies | 2014 Electric Steam Generator, 120A | Zip Technologies | 2014 DPV (Dual Purpose Vessel) x 3, 13HL | Zip Technologies | 2014 DPV, 10HL | Brew Tek Mill 2 Roll + Premasher | Zip Technologies | 2014 Chiller, 15KW | 1000L Glycol + 1000L Chilled Water | Zip Technologies | 2014 Lagering Tanks x 2, 10HL | Bier Drive | 1984 Keg Washer/Filler | Zip Technologies | 2014 Codpfsr Hkaqox Alfshd

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, Log turner, infeed-outfeed conveyors, heavy duty construction Equipment from 2019 Cedou N Ac Sepfx Alfehd

Condition: used, Year of construction: 2013, Overview The brewhouse, including fermentation and storage tanks and a KEG washer, was built in 2013 by the Austrian manufacturer Flecks. The whole equipment is in a very good condition and can be visited. Equipment Mash and brew kettle incl. whirlpool function, agitator, stainless: 1.000 L net Lauter tun, stainless: 1000 L net Calandria system (outdoor cooker), electrical heating, stainless. Integration of existing gas, heating + electrical: 72 kW Vapour-condensation system Whirlpool- system Mash and wort pump: 2,2 kW Hot water tank with electrical heating, stainless: 1000 L, 9 kW Wortcooler GEA 2-stages pT 100, electron. Thermometers Incl. all pipes, fittings, valves in stainless. Full automation upgrade: electrical switch board for full automatic process control switches, fuses: 100 kW Main connection 400 V Emergency switch PC-databus and modem Visualisations and automation software "BRAU-MANAGER" 2x cooling units 2x cooling water pumps 1x 2,000L fermentation tank: 2 outlets, cooling jacket, insulation, stainless cladding (for main fermentation) 4x 2,000L pressure tanks horizontal: 3 bar, incl. cooling jacket, insulation stainless cladding for secondary fermentation and ripening + as serving tanks) 4x 2,000L pressure tanks vertical: 3 bar, incl. cooling jacket, insulation stainless cladding (for fermentation and ripening + as serving tanks) 1x CIP-cleaning agent tank 1x beer- and CIP pump: 0,75 kW 3x beer hoses, food quality 1x malt mill, 2 rollers with motor: 1,5 kW 1x KEG cleaning equipment (10 pcs/hour) 1x Main compressor Cedouzbb Dspfx Alfohd

Year of construction: 2001, condition: ready for operation (used), A paving stone production line Omag, which has been continuously optimized and upgraded to the latest technical standards, is available. Overhauls: 1) Conversion for an additional hydraulic unit for additional load in 2020. 2) Conversion to servo-vibration with Siemens S7 control in 2016. 3) Conversion to digital path measurement of mould and ram in 2017. 4) New core filling carriages in 2017. Plant components: 1) Board destacker and board stacker including roller conveyor. 2) Board feeder (advance) and board conveyor (scraper) to the lifting frame. 3) Board turner. 4) Horizontal and vertical bundling units Ridder & Signode, years of manufacture: 1994 and 1983. 5) Trafo lifting platform including motors and without control, year of manufacture: 1983. 6) Doppler including hydraulic unit, year of manufacture: 2004. 7) Stone packer Omag K1400 including hydraulic unit, year of manufacture: 1997. The line has no base boards. 8) Stone finisher Omag S22 140-90, year of manufacture: 2001. Documentation available. An on-site inspection is possible. Cjdpfxjw R Uzie Alfohd

Condition: new, Year of construction: 2026, Electric Motor 22 kW Chjdpfezqz Sgsx Alfjd Cutting Dimensions Max. log diameter 105 cm Max. log length 6.1 m 7.9 m (with BX6 bed extension) 9.7 m (with BX12 bed extension) Min. log length 1.8 m Clearance between rollers 84 cm Max. cutting width (cant) 78 cm Max. cutting height above the blade 34 cm Max. width of clamped material 66 cm Min. width of clamped material 5 cm Max. log weight 2.5 t Head Equipment Automatic thickness setting device (Setworks) Industrial PLC controller Head feed up/down Electric (Servo) Head feed forward/backward Electric Blade guide arm Electric (joystick controlled) Blade cleaning system LubeMizer Blade tensioning system Hydraulic with air cushion Debarker Optional Chip outlet diameter 150 mm (6") Head Features Board discharge system Laser Blade Length 5000 mm Width 38 mm 50 mm (Optional) Blade guide wheels Diameter 600 mm Type With flange-pressed and brush belt Material Cast iron Bed Equipment Bed construction Single-sided head guide system Cribbing beds Standard Bed extension BX6 bed extension: 1.8 m BX12 bed extension: 3.6 m Bed Features Board conveyor belt Shock-absorbing roller Log maneuvering kit Industrial hydraulics Center clamp with two bars 2 double-sided clamping devices (optional) 2 two-way chain log turners 2 driven leveling rollers 3 stoppers on two bars 7.5 kW hydraulic unit

Condition: new, Year of construction: 2026, Engine Electric 30 kW Electric 37 kW Electric 45 kW Cutting dimensions Max. log diameter 105 cm Max. log length 4.5 m (Bed S) 8.4 m (Bed L) Up to 12 m (non-standard) Clearance between rollers 90 cm Max. cutting width (cant) 85 cm Headstock equipment Automatic cutting thickness adjustment device (Setworks) Industrial PLC controller with automatic mode Headstock up/down feed Electric (Servo) Headstock forward/backward feed Electric Saw blade guide arm Electric (joystick controlled) Saw blade cleaning system Automatic oil mist lubrication with pneumatic assistance Saw blade tensioning system Electric hydraulic with pressure accumulator Debarker Optional Chip outlet diameter 150 mm (6") Headstock features Four cameras Board discharge system Additional options Laser Saw blade Length 6270 mm Width 50 mm 75 mm (Standard) 100 mm 120 mm Saw blade guide wheels Diameter 800 mm Type Beltless Material Convex cast iron Bed equipment Bed structure Dual-sided headstock guide system Bed features Board conveyor belt Shock-absorbing roller Additional options Saw-following conveyor Log maneuvering kit Industrial hydraulics Chedpfxszqz T Rs Alfjd 1 or more log clamps on two rods 1 or more bidirectional chain turners 2 or more driven leveling rollers 2 or more stops 7.5 kW or 11 kW hydraulic unit

Year of construction: 2002, condition: used, machine/vehicle number: 001, Description Offered is an automated side board processing line with singulation, trimmer for end trimming, 2 stacking machines, additional discharge, and end trimming of stacking slats: Boards 2000-5280 mm long, 16 - 40 mm thick, 70 - 260 mm wide, cycle rate of 29 or 58 pieces/minute, operated by one person sitting at a joystick: - Boards are conveyed laterally using a 4-strand overhead chain cross conveyor Chedpjy Uzldjfx Alfjd - Singulation steep conveyor 6000 mm wide, 3000 mm inclined - Alignment roller conveyor - Chain cross conveyor as a layer former - Star turner and sorter before the trimmer Nlewsy Uzhfj D A Tmcob - Edge detection (ALFHA-Edger) - Trimmer with 11 saws in a 50.5 cm grid: The operator (sitting) at the joystick assesses: without re-trimming, 5000 mm to stacking machine 1, alternatively: without re-trimming, 4000 mm to stacking machine 1 with re-trimming, 4000 mm to stacking machine 2 with re-trimming, 3000 mm to stacking machine 2 with re-trimming, short lengths for discharge into a box, with re-trimming, short lengths for discharge into a box with re-trimming, 2 or 3 x 101 cm for stacking slats, with re-trimming, 2 or 3 x 101 cm for stacking slats or waste cut - trimming length 505 mm for the underlying vibration channel - 2 stacking machines: 1 x 2500 to 5280 mm and 1 x 2000 to 4280 mm - automatic lowering of the finished packages and transfer to automatic strapping - FROMM strapping with 16 mm plastic band and automatic transfer to the discharge roller conveyor - ALFHA control with Siemens S 7 - ensures perfect operation. Performance records / daily logs - Control cabinets with Siemens components, SEW motors, Telco light barriers For example, one employee processed, packaged, and strapped approximately 15,000 boards of side lumber 4000/17 x 76 mm in 9 hours. The system is still assembled, but the upstream chipping plant has already been dismantled. Therefore, the system is immediately available. It is very robustly built and has always operated smoothly and without any problems. A video of the process can be shown via WhatsApp!

Condition: like new (used), Demonstration machine Csdpfxezqrm Ie Alfehd The CTR1000H80 band saw with an 80 mm saw blade for even cleaner cuts and higher yield. Extra strong, solid, and durable sawing unit for log diameters up to 1000 mm. Soft starter included, expandable with extension sections. Automatic feed with infinitely variable speed. Electric height adjustment controlled from the operator panel. CE certified. Advantages and features: - Saw head suspended on both sides for greater stability and better precision. - 8.4-inch touchscreen LCD for quick and precise height adjustment. - With telescopic lever log turner and log lifter for easy log manipulation. - Log lifter with drive for horizontal log feed. - 5 swiveling hydraulic angle stops. 2 log clamping tools. - Hydraulic saw blade tension for quick adjustment. - Electrically adjustable saw blade guide and automatic coolant pump for high operator comfort. Technical data: Max. log diameter: 1000 mm Max. board width (slab width): 920 mm Max. saw blade stroke: 900 mm Min. cutting height: 30 mm Max. frame opening: 375 mm Cutting length of the base section: 7.5 m Length of the extension section: 3 m Saw blade drive output at 100% duty cycle: 22 kW Feed motor at 100% duty cycle: 3 kW Stroke motor: 0.55 kW Motor of the hydraulic unit: 5.5 kW

Condition: used, For sale: a CTR1000H40 in excellent condition with top-of-the-line features. Reason for sale: upgrading to a CTR1000H60 due to specific new orders. Condition: absolutely very good condition. Location: DE-85391 Aiterbach Contact person: Roman Griesauer Inspection: The machine is in operation and can be inspected and demonstrated upon request. Includes the following equipment: CTR1000H40-ZUB: Infeed system for the cut material CTR950H-DS: Dual-arm log loader CTR950H-HSD: Lever log turner CTR950H-KSD: Chain log turner CTR950H-MR: Material slide CTR950H-SP: Clamping device CTR-18.5: Motor 18.5 kW CTR-AMP: Ammeter CTR-EGL: Electrically adjustable saw blade guide Cedpfx Aljzqrrqefjhd CTR-KV: Cable extension for an additional section CTR-Pumpe-EA: Irrigation pump with automatic start CTR-SSP: Saw blade tensioning device CTR-ZSP: Additional control station for hydraulics

Condition: used, Year of construction: 2011, Printing & Processing Units: - 5 x EXL offset printing units (single) - 1 x Flexo printing unit (single) - 1 x EC printing unit on rail - 7 x UV drying stations (GEW HCP) - Corona S-unit - Die-cutting and laminating nip - Laminating unit – unwind / rewind Web Handling - Combination unwind / infeed unit S-1000 - Web cleaning unit (TEKNEK, single) - Web turner unit with backside reading - Combination outfeed / rewind unit S-1000 - Edge trimmer / crush cut unit Registration & Control - Single matrix unit - Double vertical die unit (SD) - Main control unit - Web video powerscope 4000 (motorized) - ELTROMAT key adjustment system Auxiliary Systems Chodpfx Aoy Rp E Dslfsd - Technotrans water dampening system - Cooling water in / out for cooling rollers (UV system) - Exhaust air connection (max. 70 °C)

Condition: used, Year of construction: 2018, Overview  This semi-automatic 20 hL brewing system was manufactured in 2018 and is equipped with a steam-powered heating system. It includes a complete brewhouse, a steam generator, a CIP station, fermentation tanks and a KEG cleaning system. Technical details  - Wort yield: 20 hL per brew - Control: Semi-automatic - Heating: Steam Scope of delivery  - Steam generator | Certuss | Junior TC-300 | 2018 - Capacity: 300 kg/h - Including water treatment plant - Brewhouse | SKRLJ DOO | BH-3 | 2018 - Mash & lauter tun - Kettle - Whirlpool - Hot water tank | 4.586 L | steam heated jacket - Cold water tank | 4.400 L | glycol cooled jacket - 2 stage heat exchanger - Grist bin 500kg - Semi-automatic CIP station | SKRLJ DOO | CIP 2x500L | 2018 - 500 Litre Acid tank - 500 Litre Caustic tank insulated, electric heating - 1x sanitary centrifugal pump - PLC for pump/temperature control - Full stainless steel construction - Keg washer | SIFA | Idrokeg 21 | 2020 - 12 KEGs/ h - 2 cleaning stations - Semit-automatic - Steam heated - 2x S-Type heads - Malt mill | Robix | RX-600 | 2018 - Capacity: 600 kg/h Chsdpfxevy U Drs Alfjd  

Condition: used, Year of construction: 2015, Overview Traditional-method finishing line for cava, champagne and other sparkling wines, from riddling and neck freezing through disgorging, dosing, corking and wire hooding to capsuling, labelling and case sealing. The machines are rated between 1,800 and 2,500 bottles/h. Two stainless steel tanks complete the offer. The line is sold as a whole; the gyropalettes and the two tanks are also available separately. Technical data - Product: sparkling wine, traditional method (cava, champagne) - Capacity: 1,800 to 2,500 bottles/h depending on the machine - Bottle formats: Bordeaux and Burgundy/cava - Years of manufacture: 1987 to 2018 - Electrical supply: 380-400 V, 50 Hz Scope of Delivery - Gyropalettes | ADRESSES INDUSTRIE | 504 S | for 504-bottle metal cages or 500-bottle packs, approx. 6,000 bottles per batch, control cabinet | 1998 Chsdez E U D Nspfx Alfsd - Balancer manipulator | DALMEC | PARTNER PMC | pneumatic, max. load 80 kg, bottle gripper head, unloads the cages into the neck freezer | 2005 - Neck freezer | TALLERES URPINAS | G+20 B | glycol/brine bath at -25 °C, touch panel, 2.28 kW, 380 V, 2,000 bottles/h | 2005 - Disgorging and dosing monobloc | PERRIER | crown cap removal, ice plug ejection, expedition liqueur dosing and levelling, approx. 50,000 bottles since the last general overhaul, original manual, 2,500 bottles/h | 1987 - Corker | AROL | GEMINI F | natural cork (mushroom) corking, single head | 2015 - Wire hooder | Robino & Galandrino | VITTORIA T 1/1 JUNIOR | monobloc with the corker, wire hood plaque feeder, inclined long-duration wire hood magazine, touch panel, 400 V, 50 Hz, original manual, 2,000 bottles/h; cork feeding and sorting hopper available as an option | 2015 - Bottle turner / homogeniser | FORNS | continuous, mixes the expedition liqueur into the wine, 2,500 bottles/h | 1987 - Washing, drying and blowing tunnel | CAMES | WDT-1 | exterior washing, high-speed Sonic air knives, 400 V, 50 Hz, 700 kg | 2018 - Capsule applicator | C.M.A.R. | capsule distributor with pleating and smoothing heads | 2001 - Labelling machine | PRIMA INDUSTRIES | PLM 1500 | self-adhesive, 3 label stations plus neck collar, capsule orientation with spot and UV sensors, SICK photocells, star wheels for 75 mm (Bordeaux) and 89 mm (Burgundy/cava) bottles, 3 kW, 400 V, 1,800 bottles/h | 2018 - Case sealer | SIAT | SK2-S | top and bottom adhesive tape sealing, 380 V, 3-phase | 2015 - Tank with agitator | DECALSA INDUSTRIAL | 12,200 L, agitator, heating and cooling coils, control box | 1988 - Tank | MAGUSA | DPG | 10,000 L, AISI 304 | 2000 Condition Used, still installed and in production. Regularly maintained; most machines have had one owner since new. Availability Available now. Inspection possible. Location: Spain.

Condition: ready for operation (used), Year of construction: 2016, A complete Hymmen laminating line for the woodworking industry is available. Main components: Transport modules (stacking roller conveyors, lifting units, gantries and platforms), surface cleaning machines, roller glue application machines, various calenders, cutting stations, press roller, film unwinding station, sawing machine, X-ray sensor system and a stack turner for double-sided coating. Nominal width: 2200mm, product width: 2200mm, line working height range: 1170mm-1270mm, line speed: 10m-30m/min, max. product speed: 25m/min, passage height: 80mm, min. panel length: 1300mm, min. panel width: 1200mm, product material: sandwich material, tolerance: +/-3mm, total line space requirement: 2 halls (590m²/347m²). Documentation available. On-site inspection is possible. This is a complete production line with peripheral equipment, pre- and post-processing stations and conveyor belts in between. The entire line has been dismantled and stored. Videos on request. Chedpfxewzx Tfe Alfed

Condition: used, Reusable glass bottle filling line for filling fruit juice and juice mix drinks. The filling line consists of the following components: - New glass bottle lifter (Kettner, 1985) with pallet loading, gripper head, empty pallet removal, bottle table and intermediate layer remover - Empty palletiser (Kettner 1994) with pallet loading, gripper head, crate table and empty pallet removal - Unpacker (Kettner, 2002) with packing heads and gripper tulips - Crate washer (Bohrer), crate cleaning trough with two crate turners - Unscrewing machine (Adelski, approx. 1990) with 12 unscrewing heads - Bottle cleaning machine (Krones, 1994) single-end machine - Empty bottle inspector (Heuft) for checking the base, mouth, side walls, thread and residual liquid - Filler (Bertolaso, approx. 1990) for hot filling with 60 filling valves and capper for twist-off caps. - Tunnel cooler (Niko, 2015) for spray cooling of the filled beverage - Labelling machine (Krones) for cold glue labelling of belly, back and neck labels - Label inspection (Metec) - Inkjet printer (Markem-Imaje, 2012) for best-before date marking - Packer (Kettner, 1989) with packing heads and gripping tulips - Palletiser (Kettner) with empty pallet feeding, gripping head and raised working platform with control panel - Pallet securing device (Bornbinder) for strapping the pallets with a horizontally applied cord - Film wrapper (Robopac) for wrapping the pallets with stretch film Additional title: Returnable bottle filling line with palletising, year of manufacture 1985 - 2015 Capacity: 15000 bo/h referring to 0.5 l bottles Formats: 0.2 l; 0.25 l; 0.5 l; 0.75 l, 1.0 l bottles / 6-packs, 12-packs, 20-packs and 30-packs / twist-off caps / Euro and brewery pallets Operation / Control: S7-300 (pallet wrapper), otherwise S5 or Schleicher control system Features: New glass lifter, depalletiser, unpacker, crate washer, unscrewer, bottle cleaning machine, empty bottle inspector, Glass bottle filler and capper, tunnel cooler, labelling machine, label inspector, date coder, packer, palletiser, pallet strapper, pallet wrapper Codpfx Aoz D Hmmelfohd

Condition: used, Year of construction: 2006, For sale: LBL Brenta log clamping carriage – year of manufacture 2005 LBL Brenta log clamping carriage This LBL Brenta log clamping carriage has been completely overhauled and is ready for immediate use. The machine comes from a professional sawmill and was regularly maintained until it was dismantled. Equipment 4 independently adjustable clamping supports Integrated log turner Integrated flippers Distance between clamping supports: 2,300 mm – 1,800 mm – 1,400 mm Cedpfx Aex Ndpbelfohd New drive unit Including rails and control panel Ready for immediate transport and loading This machine is ideal for the precise cutting of roundwood and impresses with its robust construction and the proven LBL-Brenta technology. Please refer to the attached PDF documents for the technical data, dimensions, and drawings. Inspection is possible at any time by appointment. We are available for further information, photos, or videos.

Condition: used, Year of construction: 2018, Overview  The Gruber AFD6 is a filling machine for bottles and party KEGs that was produced by the German manufacturer Gruber in 2018 and has an operating time of 725 hours. The machine is available immediately. Technical details - Output - 800 bph (at 0.33l) - 750 bph (at 0.5l) Csdpfx Aeu I Hr Uelfshd - 600 bph (with 1.0l) - 400 bph (for 2.0l) - 240 bph (with 5.0l party KEG) - Output varies depending on CO2 content and beer temperature (in practice, 1,000 bph could be achieved at 0.33l) - Long tube filler with 6 filling points - Fully automated filling process - Single or double CO2 flushing - Siemens S7 control system with touch panel - Operating hours: 725 hours

Condition: used, Year of construction: 2014, Overview This robot-palletizer was built in 2014 from German manufacturer Kuka. The machine has 2 different gripping heads for the handling of KEG´s and plastic crates. It´s equipped with 6 axes and is in a good condition. The machine was serviced every year and dismantled in 2025. Technical Details - Capacity - Depend on layer formation Chsdpfxoyb Ryco Alfsd - Equipped for the handling of: - KEG´s - Modul crates

Condition: used, Year of construction: 2007, functionality: fully functional, Used horizontal ZENZ block bandsaw line, type BN 110 S, with complete conveying system, stationary. Automatic infeed with log infeed device, control panel for the block bandsaw, with cutting program and conveying system for the removal of the cut material with a sorting conveyor. Particularly noteworthy are the: ZENZ saw head control via joystick Chsdewlfdxopfx Alfsd Positioning control Siemens PLC with touchscreen Automatic feed control via current monitoring Year of manufacture: 2007; completely overhauled in 2022 Conveying system year of manufacture: 2022 Manufacturer's number: 141-8300 Equipment: • 22kW drive motor • 7m cutting length • 5 vertical supports • 2 log turners (+2 holders) • Log lifting preparation with frame • 4 leveling devices with claws (+2 holders) • 1 log roller • 1 new pre-cutter • PLC control incl. sorting program • Seat mounted on armrests • PLC on the left - joystick on the right • 1 Zenz sharpening machine, type AHB (manufacturer's number: S-1012) • 4 bandsaw blades 6000x100x1.1 stellite for softwood (prod. no.: AB 0) • 4 bandsaw blades 6000x100x1.1 stellite for hardwood (prod. no.: AB 0) • Water lubrication with 20l drum and nozzle o Mounted on the blade guide • Log lifting system o With 3 log lifting arms o With 2 cylinders • Log lifting preparation in the frame o With control unit o Holder for pipe o Two holders for cylinders • Ejector, hydraulic, for frame 820mm • Laser indicator, green, horizontal Mechanization consisting of: • Folding frame, hydraulic, for removal at the saw with electrically driven roller conveyor • Electrically driven roller conveyor with hydraulic ejectors Both roller conveyors run simultaneously • Roller conveyor 4m long – slightly angled with stop o All electrical and hydraulic elements can be operated from the control stand The block bandsaw, including the conveying system, is fully operational and can be inspected on-site. If required, we can provide support with the disassembly and assembly.

Condition: new, Year of construction: 2024, ZENZ ECOLINE – not operational in 2024 7m cutting length 100x130 cm throat capacity 95cm cutting width 22 kW electric motor 6000x100x1.1mm blade 850mm saw blade roller diameter Joystick for feed and lift with electronic position control Debarker Water lubrication 4 side supports 1 manual side support 3 log lifters Cheds Ahgytjpfx Alfod 2 log turners 1 log holding arm 3 level compensation systems with clamps 1 log roller Mobile system with 4 wheels and brakes, German homologation 3.5 t

Condition: excellent (used), functionality: fully functional, ARI high capacity line for big logs Log deck 2 sections Step feeder Log conveyor Debarker infeed (Remill) Debarker Cambio 90-75/6 (or a Cambio 500) 2d scanner for reject boxes Log conveyor with 2 reject boxes Log conveyor, kickers to the left Buffering deck and step feeder Log conveyor Rema 3d scanner AriVislanda LT2 auto log turner 2006 AriVislanda LI-600 log centering infeed 2006 AriVislanda RL-600 Reducer AriVislanda QSS-700 Saw 2011 Chedewp E Tnjpfx Alfod AriVislanda VFW 600 L 2011 AriVislanda board separator 2006 Block tilt AriVislanda block infeed type Nils AriVislanda RC-600 Reducer Ingvar Persson turn table AriVislanda 500A Infeed AriVislanda 509-7F Multirip AriVislanda boardseparator Beltconveyor Dual Edging lines Söderhamn (1 left 1 right) 2 x 300 m/min Cross conveyors Söderhamn Elevator Söderhamn 483 Scanners Söderhamn 528 Infeed Söderhamn 5100 Edger Söderhamn 5400 Edger outfeed with reject displacement EdgeIT system

Condition: like new (used), functionality: fully functional, Year of construction: 2021, machine/vehicle number: ILL, Carl Stahl Rotomax load turning device Load turner Payload capacity: 1 to 1000 kg Cjdpfx Asxwd Iqslfehd Connection: 400V, 16A Item location: 75053 Gondelsheim Very good condition, see pictures Shipping via freight forwarder or collection by appointment

Condition: used, Year of construction: 2001, Titan Die Cutter MLF 170 Year: 2001 with chrome-plated and precision-ground cutting bed Complete with safety guards and operator panel Electrical and hydraulic systems Chsdpfeyu N R Hjx Alfsd Cutting bed with cold and hot working system CE certified Zenari Engineering Feeder / Pile Turner Model: MettilevaFogli MLF 170 (2002) Automatic pile feeding system Hydraulic lifting and transfer system with rollers Adjustable speed and pile height control Max sheet format: 1200 x 1700 mm Max sheet format: 500 x 700 mm Cutting force: suitable for heavy carton and corrugated board Automatic feeder (Zenari MLF 170) Die cutting press (Titan MLF 170) Delivery system with roller track Safety features: full enclosure and operator access controls Regularly serviced and maintained

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Log handling line, LINCK sawmill line, lumber sorting line with stacking system Log handling line: - Infeed - Cut-to-length - Turner - Emergency outfeed channel, possibility of log discharge - Root flare reducer (butt reducer) - Valon Kone debarker - Metal detector - Hellak DLV 720 - Log sorting line - 32 boxes LINCK sawmill line: LINCK Canter V40, year 1997 • Max. roundwood diameter: 650 mm • Min. roundwood diameter: 100 mm • Max. log length: 6 m • Min. log length: 3 m • Feed speed (30-80Hz): 25-70 m/min • Cutter head drive power: 90/132 kW • Number of knives: 3 • Cutting depth: 160/200 mm LINCK Multi-rip saw CSMK 375-A3/B3, year 1997 • Min. timber length: 3.00 m • Min. cutting thickness: 50 mm • Max. cutting thickness: 375 mm • Feed speed (frequency controlled): 25-70 m/min • Saw diameter: 648 mm • 648x5.7/3.5/6.8x160 Left • 648x5.7/3.5/6.8x160 Right • 648x5.7/3.5/x165 Plate • Shaft speed: 2500 rpm • Drive power per saw shaft: 110 kW • Weight (with motors): 18800 kg LINCK Turner DV 55, year 1996 • Feed speed: 36.2 m/min • Max. log diameter: 550 mm LINCK Canter V30, year 1996 • Max. roundwood diameter: 500 mm • Min. roundwood diameter: 100 mm • Max. log length: 6 m • Min. log length: 3 m • Feed speed (30-80Hz): 25-70 m/min • Cutter head drive power: 90/132 kW • Number of knives: 2 • Cutting depth: 160 mm LINCK Milling unit VP34 • Min. timber length: 3 m • Max. timber length: 4900 mm Cedpfxoyyd Tnj Alfohd • Max. milling depth: 50 mm • Max. cutting height: 120 mm • Min. board width: 60 mm • Feed speed (50Hz): 41.7 m/min LINCK Saws S2 VS 66 S • Min. timber length: 3 m • Cutting height with inner saw: 280 mm • Cutting height with outer saw: 280 mm • Feed speed: 36 m/min • Saw diameter: • 505x5.2/3.6/6.8x120 mm Left • 505x5.2/3.6/6.8x120 mm Right LINCK Multi-rip saw S3 VSV 80-A, year 1988 • Min. timber length: 2.50 m • Cutting height: 280 mm • Feed speed: 40 m/min • Saw diameter: • 510x5.2/3.6/6.8x120 mm Right • 510x5.2/3.6/x120 Plates LINCK Horizontal saw KH1, year 1985 • Min. timber length: 3 m • Min. cutting height: 60 mm • Max. cutting height: 140 mm • Max. cutting depth, right saw: 140 mm • Max. cutting depth, left saw: 140 mm • Min. cutting depth: 130 mm • Feed speed: 40 m/min • Saw diameter: 520x5.8/4.0x150 mm Lumber sorting: Lumber sorting by length, width and thickness 32 boxes for lumber Stacking and bundling system for lumber packs The offered line has a real capacity of approximately 70 000 m3 - 110 000 m3 per year in one-shift operation. Huge spare parts inventory. Sharpening room. We offer complete service from sale to installation and commissioning in the new location. For an additional fee, professional dismantling, loading and commissioning in the new location are possible.

Year of construction: 2001, condition: excellent (used), functionality: fully functional, Compost Turner BACKHUS 10.10. Diesel engine: 264 hp Chsdpfxey Equ Hj Alfed Weight: 14.9 t Current videos can be provided upon request.