Used Kreissaege Sawmill for sale (753)

Condition: new, Year of construction: 2025, Sawmill Viking VBS1400 Pgodpfxoyuy Ebo Ag Tji Log bandsaw with double cut bandsaw blades. Cuts back and forth!!! Roller diameter: 1000mm Bandsaw blades: double-sided = 150mm wide, single-sided = 140mm wide Blade speed: infinitely variable, 0 - 45m/s Feed speed: 0-60m/min. Log diameter: up to 1400mm (max. 1600mm) Cutting length: 6m (up to 12m extension possible, not included) Saw head: 3500 kg Digital cutting thickness adjustment via CNC touch panel Manual control unit with joystick Cutting view via green laser and video monitoring 30 kW saw motor Frequency converter 30kW - infinitely adjustable to regulate the saw blade speed for different types of wood Blok manipulation: Hydraulic Condition: New

Condition: excellent (used), CATALOG NUMBER 7881 Technical data: - Cutting height: 30-200mm - Max saw blade diameter: 350mm - Spindle diameter: 70mm - Max cutting width of wood: 500mm - Working width of arbor with saws: 400mm - Minimum length of cut wood: 1000mm *Top: - Anti-kickback devices Podpfoyk Hhbox Ag Tegi - 4 toothed feed rollers – pneumatically pressed *Bottom: - Sliding roller - Anti-kickback devices - Toothed feed shaft, 2 pcs - Arbors with saws - Toothed feed shafts, 2 pcs - Infinitely adjustable feed speed via frequency inverter - Feed motor: 3kW - Main motors: 2x55kW - Extraction outlet diameter: 250mm - Machine dimensions (L/W/H): 2150x1880x1800mm - Machine weight: approx. 3500kg ADVANTAGES – Made in Poland – Double-arbor multi-blade saw, 2x55kW – Original DTR + CE documentation – Used multi-blade saw in very good condition Net price: 88,900 PLN Net price: 21,200 EUR (based on the rate of 4.2 EUR) (Prices may change with significant rate fluctuations)

Condition: used, Year of construction: 1992, operating hours: 5,093 h, functionality: fully functional, load capacity: 4,000 kg, Equipment: crane, Baljer & Zembrod Sorting Line – 75 m, Operational, Available at Short Notice For sale is a used sorting line from the manufacturer Baljer & Zembrod, model AS/30V-L.D. The system comes from active operation and was decommissioned as part of a planned site relocation. The sorting line is fully functional but shows typical signs of wear consistent with its age. Note: The system was previously reserved and is now available again. Technical Data Model: AS/30V-L.D Year of manufacture: 1992 Operating hours: approx. 5,093 Condition: used, operational Defect: Saw blade is defective Length of crane runway: approx. 75 m Crane runway width: 3 meters Load capacity: 4 tons (see load capacity diagram in the photos) Length of round timber staging: approx. 23.5 m Description The machine is suitable for sorting round timber and was in use until recently. The sorting line has been regularly serviced but, due to its age, is in average visual condition. Hydraulics and electrics function reliably. The saw blade is defective and should be replaced or repaired. Fields of Application Round timber sorting Sawmills Pgsdpfxjyu U Rls Ag Toi Timber processing Biomass and round timber logistics Availability The machine is dismantled and stored outdoors and can be inspected by appointment. Immediate takeover is possible. Inspection under operating conditions (powered up) is possible until early week 14. Afterwards, the location will be disconnected from the power supply due to new building construction. Further technical details, photos, or a site visit can be provided on request.

Condition: used, Üstünkarli edger saw, used. Parallel board edger Hydraulic adjustment Adjustable bushing, lath bushing Roller conveyor with switch lever, Cross conveyor and material chute Podpfx Aoyvzx Hog Tjgi Infeed rollers, control panel Type UDKY Cutting height ≈120 mm Cutting width ≈800 mm Blade diameter Ø 350-400 mm

Condition: excellent (used), For sale: complete fire-fighting trailer equipped with a professional ALCO MONITOR water cannon. The set is fully mobile – ideal for fire brigade use, fire protection, and securing large areas (fuel depots, sawmills, production plants, storage yards). Pgjdpex Edrrjfx Ag Tji Technical condition: • ALCO / MONITOR water cannon – heavy-duty cast iron construction • Full adjustment of direction and spray angle (control wheels) • Directional nozzle on extended boom • KALI Anhänger Service GmbH trailer, GVW 700 kg • Hitch: Peka Fahrzeugbau, type DV127 • Two side tanks with filling ports • Shut-off valves, fire-fighting quick couplings • Stabilizing supports with height adjustment • Lighting installation, fenders, wheels in very good condition • Well-maintained, complete, ready to use Applications: • Voluntary/Professional fire brigades • Large production facilities • Timber yards, sawmills • Chemical and fuel plants • Securing mass events • Extinguishing fires from a great distance / high water flow

Condition: used, No. 3130-02 Block bandsaw Primultini 1300 SG Used, year of construction approx. 1980 Right-hand version Roller diameter 1300 mm Blade support width 140 mm Saw blade 150 x 1.1 mm Clearance height with block carriage CFA according to drawing 1075 mm Cutting height with block carriage CFA according to drawing 700 mm Cutting width with block carriage CFA according to drawing 530 mm Electric blade guide and blade tensioning Main motor 380 V, 50 HP Block carriage PRIMULTINI CFA, length 8000 mm 5 automatic clamping blocks Electric closing and opening of the hooks Electric clamping and adjustment Hydraulic feed by means of cable pull Electro-hydraulic block turner with 2 arms System already dismantled Electrics and controls must be partially replaced Total weight approx. 10 tons Sale on behalf of customer, ex location near 92660 Neustadt, without transport and assembly Errors in description and price excepted Transportation and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Podpjurmvajfx Ag Tsgi Terms of delivery: ex location

Condition: used, functionality: fully functional, Horizontal block bandsaw BÖGLI ARL150 with hydraulic clamping carriage including complete ALBER sharpening machine with back grinding device. The ideal machine for processing large logs. Cutting thickness is entered via a 'Mudata' control unit. A ripsaw for splitting is mounted directly on the saw frame. Blade wheel diameter: 1,500 mm Blade wheel width: 170 mm Cutting length up to 8 m Max. clearance: 1,900 mm 5 hydraulic clamping fixtures 3 hydraulic log turners Saw drive power: 45 kW Feed drive, frequency controlled: 5.5 kW (wire rope drive) The machine has been professionally dismantled by our skilled personnel and can be inspected in our warehouse by appointment. Pgodpfx Agexp Hzde Toi

Condition: used, Year of construction: 1994, operating hours: 10,200 h, functionality: fully functional, arm reach: 14,500 mm, track width: 3,000 mm, Equipment: cabin, crane, For sale is a used Wolf Sorting Train RSZ 3.00-14.5/25 with the following features: Year of manufacture: 1994 Operating hours: 10,200 Pgsdpeyvuz Uefx Ag Toi Rail length: 65 m Track gauge: 3.0 m 4-wheel drive Location: 48727 Billerbeck Crane type: EPSILON E.28.147 S Herkules Reach: 14.5 m Lifting capacity without grab: 1,950 kg at 14.0 m Grab: included Crane position: behind the cabin Cabin side: right Cross-cut saw: right Multitronic, cross-cut optimization The machine is fully operational and can be inspected by appointment. Sale due to cessation of business operations. We look forward to your inquiry and are available at any time for further information.

Condition: excellent (used), CATALOG NUMBER 7847 TECHNICAL DATA - Min. width of center prism after cutting: 70mm - Minimum length of cut log: 1300mm - Maximum diameter of cut log: 350mm - Shaft diameter: 70mm - Circular saw blade diameter: 500mm - 2 feed speeds + forward/reverse + with frequency inverter - Lower spindle drive motor power: 18.5kW - Upper spindle drive motor power: 15kW - Max. number of saw blades per upper and lower spindle: 4 pcs each - Feed drive motor power: approx. 1.1kW - Track length: 4450mm - Extraction port diameter: 2x200mm - 3 rows of anti-kickback fingers in front of saw blades - 1 row of anti-kickback fingers behind saw blades - Dimensions (L/W/H): 6010x1500x2000mm - Weight: approx. 1250kg Pedpfx Agsyi T H Ij Tsgi ADVANTAGES – Made in Poland, brand: WALTER – DTR technical documentation – Used machine, very good condition Net price: 35,900 PLN Net price: 8,550 EUR Net price calculated at exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalogue number 7756 TECHNICAL DATA - Max. blade diameter: 400 mm - Blade guard - Blade bore diameter: 30 mm - Max. workpiece diameter with 400 mm blade: 130 mm Podpfxeyi Ttue Ag Tjgi - Motor approx. 5.5 kW - Feed motor: 1.1 kW - 3 feed speeds + forward/backward - Dimensions (L/W/H): 1500x1300x1300 mm - Weight: 530 kg ADVANTAGES – For palisades – With pointing device – Easy to operate – Occupies little space – Used saw, very good condition Net price: 8,900 PLN Net price: 2,120 EUR depending on exchange rate of 4.2 EUR (Prices subject to change with stronger fluctuations)

Year of construction: 1999, condition: excellent (used), 1. Block conveyor 2. Transverse conveyor 3. Linck FWK quick-release carriage Track gauge: 900 mm Travel speed (forward/reverse): 80/180 m/min Clamp opening: 750 mm Log length: 2.5–13.5 m 4. Sawing unit Linck KCSU-6 Round timber diameter: 120–650 mm Drive per side: 160 kW Max. cutting height (triple): 405 mm Residual: 370 mm Log length: 2.5–13.5 m Max. feed-through width: 750 mm Cutting width min/max: 18–720 mm Split wedge opening: 560 mm Saw blade diameter: 620 mm Edger distance: 370 mm Net weight approx.: 15,000 kg Stepless feed rate adjustment: 10–35 m/min 3. Timber removal device BM 1/MBH 4. Edger cross-cut saw Linck KA 1/ACF 5. Complete hydraulic system 6. Complete electrical/control system 7. Complete circulating conveyor technology 8. Discharge mechanisation 9. Waste removal underneath KCSU Year of manufacture: 1998. Commissioned in 2000 Various tools Sale according to customer order. Podpfx Agextwwko Tjgi

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, working range: 40 mm, Flash butt welding machine IDEAL BAS 040 – very good working condition For sale is a butt welding machine IDEAL, model BAS 040, suitable for carpentry shops, sawmills, woodworking plants, or for the custom production of bandsaw blades. Technical data: Welding of wood bandsaw blades: 6 mm – 40 mm Welding of metal bandsaw blades: 13 mm – 27 mm Year of manufacture: 2008 Rugged and reliable construction, typical for the IDEAL brand Consistently perfect weld seams Very good working condition The machine is fully functional, has been regularly maintained, and is ready for immediate use. No additional investment required. Pgjdpfeynttxox Ag Tsi For further information, photos, or to arrange a demonstration, please contact me.

Condition: new, The AE-400 SERVO edger is designed for longitudinal trimming and slitting of side boards fed to the machine at high speeds (100-400m/minute). The machine works directly with conveyors feeding and receiving boards in automatic mode. The machine is equipped with a board scanner from above and below. The maximum instantaneous efficiency of the edger up to 55 boards/min can be obtained by cutting a 2.5 m board to the same width without changing the spacing of the saw blades. Each adjustment of the edger node devices to the width of the board causes a change in performance. The average productivity of the machine, depending on the work configuration, ranges from 35-48 boards/min. technical dance No. Parameter Value 1. Saw spindle drive motor power. 55 kW 2. The number of revolutions of the saw spindle. 3550 rpm 3. Diameters of used saws. 400mm 4. Maximum cutting height. 50mm 5. Number of saw blades used. 2 to 3 pcs. (2 floating saws) 6. Minimum board length. 2000mm 7. Maximum raw material length. 6200mm Psdpjnygvrofx Ag Tegi 8. Maximum number of boards after cutting 1 board: 2 pcs. 9. Feed: 100- 400m/min Cutting for 1 board - with two saws (2 floating saws): 1. Minimum saw spacing (board width after cutting) 75 mm 2. Maximum spacing of extreme saw blades (board width after cutting) 300 mm Cutting into 2 boards - with three saws (2 floating saws), 1. Spacing the saws on the fixed coupler (board width after cutting) 50-100mm 2. Spacing between floating saws (board width after cutting) 50-100mm 3. Cutting into 2 boards minimum 2 x 50mm 4. Cutting into 2 boards maximum 2 x 100mm Other machine configurations are possible on request. We also produce other sawmill lines: log sorting plants, board sorting plants, board stackers, conveyors.

Condition: good (used), Code: 0306 Brand: VM Model: 2/18 Pgedoymfiijpfx Ag Tei Suction system with 18 sleeves and 2 collection bags for carpentry workshops, furniture factories, sawmills, woodworking shops and various Technical data: N° 18 filtering sleeves N° 2 collection bags Motor Hp 7,5 Electrical panel Overall dimensions: mm 2800 x 1200 x 3200 h

Condition: good (used), Year of construction: 2006, functionality: fully functional, 2 units debarking machines: 1x VK5068 and 1x VK32 in TOP CONDITION. VK5068 debarking diameter 100-680 mm / VK32 100-820 mm. Machine with Air-Seal technology, enabling adjustment of knife pressure during the debarking process. Pjdpfx Asyryvusg Togi

Year of construction: 2025, operating hours: 2 h, condition: new, functionality: fully functional, Pelletizing plant for a wide range of materials such as wood, miscanthus, agricultural by-products and waste (hay, straw, corn stover, etc.), animal feed, and more. This is a complete compact system, built on a base frame, consisting of the following components: - Raw material storage hopper (4 m³) with agitator - Hammer mill, 22 kW drive power, for size reduction of raw materials (e.g., wood chips) - Inclined mixer for raw material, including level sensors and fully automatic moisture dosing - Dosing hopper for pelletizing aids (e.g., corn starch) - Dosing screw for optimal material feed to the press (speed-controlled) - Pellet press with 30 kW drive power, featuring a horizontal ring die, discharge chute, temperature monitoring, overload protection, and more - Conveyor belt for pellet discharge, drop height approx. 2.5 m - Drum screen for dedusting and cooling of pellets Pgsdpfexlif Rjx Ag Tei The entire plant is centrally operated via Siemens PLC with touch display! All parameters are continuously monitored, and the plant will automatically shut down in case of malfunction! The system is designed and prepared for operation with a second press! Price excl. VAT! !!!!! Attention!! We are continuously looking for sales and service partners (worldwide) !!!!!

Condition: new, Year of construction: 2025, type of input current: AC, power: 5.5 kW (7.48 HP), input voltage: 400 V, Pelleting plant for a wide variety of materials such as wood, miscanthus, agricultural by-products and waste products (hay, straw, maize straw ....) Animal feed ..... This is a complete system (compact system), which is built on a base frame and consists of the following components: Storage container for raw material 1.5 m³, incl. agitator Inclined mixer for raw material incl. level sensors and fully automatic moisture metering Psdpfxsud Nx Hs Ag Tjgi Dosing screw for optimum material feed to the press (speed-controlled) Press 5.5 kW, with horizontal round die, discharge chute with dust separation, temperature monitoring Conveyor belt for pellet removal, discharge height approx. 2.0 m The entire system is operated centrally using a Siemens PLC via touch display! In addition, all parameters are permanently monitored so that the system is shut down if a problem occurs! Price excl. VAT! The price includes operator and service training (in A-4352 Klam)! Attention, some of the pictures do not correspond to the actual system ( are example pictures ) !!!!! Attention!!! we are constantly looking for sales and service partners (worldwide) !!!!!

Condition: new, Year of construction: 2025, operating hours: 2 h, functionality: fully functional, Pelletizing plant for a wide range of materials such as wood, miscanthus, agricultural by-products and waste products (hay, straw, corn straw...) animal feed... This is a complete system (compact system) which is built on a base frame and consists of the following components: Storage container for raw material 4 m³, including agitator Inclined mixer for raw material including level sensors and fully automatic moisture dosing Pgjdpfxovlz H Re Ag Tsi Dosing container for pressing aids (e.g. corn starch) Dosing screw for optimal material feeding of the press (speed-controlled) Press 15 kW, with horizontal round die, discharge chute, temperature monitoring, overfill protection..... Conveyor belt for pellet removal, discharge height approx. 2.5 m Drum sieve for dust removal and cooling of the pellets The entire system is operated centrally using a Siemens PLC via touch display! In addition, all parameters are permanently monitored so that the system is shut down if a problem occurs! The system is designed and prepared for the operation of a second press! Price excl. VAT! !!!!! Attention!! we are constantly looking for sales and service partners (worldwide) !!!!!

Year of construction: 1992, operating hours: 47,000 h, condition: used, We offer this used Baljer & Zembrod OB/30V-R.D. machine, year of manufacture 1992. Pjdpfx Asynwhteg Tegi Manufacturer: Baljer & Zembrod Model: OB/30V-R.D. Year of manufacture: 1992 Condition: used Category ID: 1382 type of crane: OB maximum reach: 13.2 m lifting capacity at maximum outreach: 1,800 kg with grapple operator cabin power cable wound on drum For any questions or to receive additional information, please send us a message or contact us by phone.

Condition: used, Year of construction: 1993, machine/vehicle number: 315 AE 0643 V 02 85, ACMA DM82 – Single-Blade Rip Saw (Délingeuse monolame) The ACMA DM82 is a robust French single-blade rip saw for professional longitudinal splitting of boards and strips in sawmills and woodworking shops. Featuring hydraulic feed and INRS safety approval (Visa No. 315 AE 0643 V 02 85) from 1993, it is ideal for precise wood cutting up to 160 mm height. Pgjdpfxjyrnxko Ag Tsi Cutting length: 4000–5200 mm Cutting height: 140–160 mm Cutting width: 370–600 mm Saw blade Ø max.: 600 mm (min. 450 mm) Saw motor power: 9–13.2 kW (12–18 HP), 380 V 3~ RPM: 3000 rpm Hydraulic motor: 2.2 kW Table height approx.: 820 mm Dimensions (L×W×H): 4800–6600 × 1500–2300 × 800–1500 mm Weight: approx. 1350 kg

Condition: new, functionality: fully functional, Year of construction: 2026, CORMAK DC2200 Model The CORMAK DC2200 is a powerful and robust cyclone dust extractor, designed to efficiently purify the air in woodworking shops, furniture factories, and metalworking facilities. Thanks to its cyclone separator, high-performance radial fan, and modern filtration system, the machine ensures effective particle separation and long-term high efficiency. Main Advantages of the CORMAK DC2200 High extraction capacity – up to 2800 m³/h – effective removal of dust and shavings from multiple workstations simultaneously Cyclone separator – separates larger particles before the filter, extending its service life Powerful 2.2 kW (2200 W / 50 Hz) motor – stable and reliable continuous operation Large 151-liter metal container – convenient and safe waste collection Filtration area of 4.8 m² – ensures high efficiency in capturing fine dust particles Compact, mobile design – sturdy frame with transport wheels for easy movement Quiet operation – optimized fan design reduces noise without sacrificing performance Design and Technology The CORMAK DC2200 is equipped with a 365 mm radial fan, generating a maximum static pressure of 2220 Pa. This allows efficient air suction through long ducting systems and multiple workstations. The extractor offers three suction inlets (3 × Ø100 mm) and one main inlet (Ø200 mm) for flexible setup according to the production area layout. The cyclone separation system effectively removes heavier particles at the inlet, directing only pre-cleaned air to the container. The cylindrical filter (Ø370 × 612 mm) ensures consistent airflow even during intensive operation. Performance and Ergonomics The DC2200 extractor is designed for daily use in small and medium-sized workshops. The 151-liter container (Ø620 × 570 mm) provides long working cycles without frequent emptying. With its compact dimensions (1320 × 900 × 1840 mm) and lightweight design (136 kg net), the unit fits easily into any workspace. Applications The CORMAK DC2200 is ideal for use in: Carpentry and furniture workshops Sawmills and wood-processing facilities Model-making and metalworking shops Production of composite and MDF components Standard Equipment Cyclone separator Cylindrical filter with large filtration surface 151 L metal container for dust and shavings Transport wheels Suction inlets: Ø200 mm and 3 × Ø100 mm Technical Specifications Parameter Specification Pjdpfx Asxrdhasg Tsgi Motor power 2.2 kW / 50 Hz Airflow (without filter) 3900 m³/h Max. static pressure 2220 Pa Fan diameter 365 mm Inlet diameter 1 × Ø200 mm / 3 × Ø100 mm Container volume 151 L Container dimensions Ø620 × 570 mm Filter surface area 4.8 m² Filter dimensions Ø370 × 612 mm Overall dimensions (L × W × H) 1320 × 900 × 1840 mm Weight (net / gross) 136 / 170 kg

Condition: used, Remote controlled tensioning wagon fully hydraulic. Track gauge 900 mm. Carriage height 400 mm. With auxiliary trolley. Cabin. Electric control cabinet. Model / Prism Chains driven. 4 years before decommissioning many new parts installed. Hydraulics, feed, collet etc. Pedpfx Agsmhgc As Tsgi

Condition: excellent (used), functionality: fully functional, Möhringer log and cant feeder, for singling and allocating round timber and cants to the carriage. Optimal separation even for different diameters. Complete with hydraulic unit and solenoid valves. Little use, from a small joinery workshop. Dismantled and loaded free on truck. Podpfx Ajyfv A Rjg Tsgi

Condition: new, Year of construction: 2026, functionality: fully functional, power: 55 kW (74.78 HP), • 160 mm cutting height • 600 mm cutting width • 70 mm saw shaft • 1 set of spacer rings according to customer requirements • 5–30 m/min infinitely variable feed • 2.2 kW feed motor • 4 driven lower rollers • 2 upper driven rollers • 3200 kg weight • 55 kW saw motor • Complete electrical system, with control cabinet and control panel • CE-compliant design • Machine painted in RAL 6011 • Protective devices painted in RAL 7032 Pgsdpfoxqd Nnox Ag Tji

Condition: used, Hammer mill Rematec RPM 650 Pgsdpfx Ajymcq Dog Toi Power: 75 kW Manufacturer: Rematec Model: RPM 650