Used Laboratory for sale (1,399)

Condition: good (used), Erlab Captair Filtair 936 Fume Hood Erlab's exhaustless, filtering chemical fume hoods offer the world's most powerful filtration, guaranteeing safety and performance. A system with countless advantages, providing seamless protection throughout the laboratory and beyond. Equipped with SMART technology, an intuitive communication platform that monitors all critical fume hood performance criteria and ensures your safety at all times. Advantages Complete user protection Filtration safety: All captair filtair fume hood models comply with AFNOR NFX 15-21 1 Class II. High retention capacity for chemical vapors in the work area, guaranteed by controlled air velocity at the front and compliance with pollutant retention standards (XPX 15203, BS 7258, DIN 12927). A sampling valve for the exhaust air allows the user to check filter saturation at any time using colorimetric test tubes (not included). The acrylic front and door protect against potential chemical splashes (fire classification, NF P92.507 standard). Gedpfx Abjyk Dq Hjhjbi Ergonomics and comfort Angled front panel provides better visibility of the work area. Thoughtfully designed hand openings give the user ample freedom of movement within the work area. Cable glands for routing electrical or power cables into the work area. Optimized working position. Very low noise level (49 dBA). Transparent walls for a clear view of work processes within the work area. Easy installation / Energy savings. No exhaust duct required; a standard electrical outlet is sufficient. Direct installation in your laboratory or on an optional mobicap rolling table. Energy savings through the recycling of purified air from the unit without the consumption of heated or cooled air. Erlab/Captair fume hood Filtair 936 Connection values: 230 V, 50 Hz, 94 W Safety class 2 Air flow rate: 200 m³/h Front air inlet velocity: 0.51 m/s Filter type: S Filter 960-961 Safety class 3 Pollutant retention class: B 2 fans Analog flow meter Noise level: approx. 51 dB(A) External dimensions: 110 x 84 x 74 cm Internal dimensions: 87 x 82 x 73 cm Working chamber volume: 0.432 m³ Two access openings in the front panel Available Filters: MF and VF CE marked. Find more items – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2007, Laboratory foam dosing station with foam mixer and applicator The system works in a similar way to the SUPRA MIX concept. Several chemicals are dosed and mixed with water and air in a controlled ratio. Recipes are stored on the controller and can be changed during operation. Foam applicator with mixer - Dynamic foam mixer with online dosing of 5 products + water - 5 dosing pumps - One direct inlet for mixing - Product monitoring for the chemicals - Air dosing valve - Dynamic foam mixer with adjustable speed - PLC control - Foam applicator - For one-piece carpets up to 1 m wide applications Stain blocker Dirt, water and oil repellents Fluorocarbons Antistatic chemicals Plasticizers Flame retardants Antibacterial chemicals Moth and beetle repellents Pile stabilizers Anti-hair loss agents Resins for wrinkle prevention and dimensional stability Specification Foam density: 20 - 100 g/l (higher density at lower flow rate) Dosing range: 0.5 - 500 g/l (1:100 with each pump) Foam volume: 50 - 500 l/min Electrical data Connected load: 6kVA, 10A Mains voltage: 400V / 50Hz Gbsdpfx Aou D E A Dobhoi Control voltage: 24V Dimensions HxWxD = 1400 x 2100 x 860 mm Year of construction: 2007 Purchase price: 47600 ,- € Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!

Year of construction: 2014, condition: ready for operation (used), A compact Sirona laboratory scanner for the dental industry is available. Scanning method: 5-axis robotic arm, technology: digital stripe light projection with autofocus, accuracy: less than 12µm, machine dimensions X/Y/Z: approx. 480mm/740mm/460mm, weight: approx. 40kg. Accessories included. Documentation available. On-site inspection is possible. Gjdpfx Ajw Az Nlebhsbi

Condition: ready for operation (used), Various machines from a dental laboratory for the processing of dental restorations are available. 1) Grinding and cutting machine (plaster trimmer) Reco GMT 5330, speed: 1500rpm, grinding wheel diameter: 250mm, bore: approx. 15mm. 2) Dental ceramics furnace Vita Inceramat, max. temperature: 1200°C, firing chamber height: approx. 80mm, machine dimensions X/Y/Z: approx. 500mm/400mm/600mm, weight: approx. 25kg. 3) Model drilling unit Whaledent Pindex P-110. 4) Fine blasting device Renfert Basic Duo, operating pressure: 2bar-6bar, blasting medium containers: 2, mixing principle: Venturi, machine dimensions X/Y/Z: approx. 450mm/400mm/300mm, weight: approx. 10kg. Documentation available. A visit on site is possible. Godpfx Aoxx Ufcjbhebi

Condition: good (used), Year of construction: 2015, Laboratory furnace for bending tests, 120 kW kiln, 900 °C chamber furnace 2 bending chambers Adjustable ceiling height Temperature range: max. approx. 900 °C Auxiliary heating Control cabinet PC, HP, Intel Core 2 Duo Voltage: 400 V Power: 120 kW Year of manufacture: 2015 Pre-chamber Width: 900 mm Height: 300 mm Depth: 580 mm Bending chamber Width: 520 mm Gbjdpexurpwsfx Abhji Height: 115 mm Depth: 550 mm Financing through our bank is also possible. komplett-konzept.leasingo.de Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: good (used), Roaches 3 bath laboratory dyeing machine Gbjdjuzhqrjpfx Abhji Roaches 3 bath laboratory dyeing machine 400 V 6600 W 10 A HxWxD= 920 x 1760 x 450 mm Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: excellent (used), Mathis THN 10988 Laboratory Thermosol System Application This padder-dryer combination has proven itself extremely effective in practice. Gbedou D Arispfx Abhsi It is used in this form for a wide variety of hot air treatment processes, such as drying, setting, condensing, thermosolizing, etc. This system is used wherever a certain sample size is required, for example, to produce sample collections or similar. THA Dryer If the padder and dryer are to be used separately in addition to continuous operation, the THA dryer should be selected. This unit is equipped with an unwinder at the dryer inlet and an extractor at its outlet. This element determines the fabric speed when operated separately. This offers the advantage of using the padder and dryer independently and simultaneously. The fabric is then transferred to the dryer for drying, setting, condensing, etc. If all of the above-mentioned applications are to be ensured and if the use of pin frames is also desired for stand-alone operation of the dryer, the THN model is preferable. The standard pin frames are suitable for a sample size of max. 50 x 50 cm (larger pin frames available upon request). Lengthwise adjustable frames for woven fabrics or lengthwise and widthwise adjustable material holders for warp-knitted and knitted fabrics, nonwovens, etc., as well as clamp frames for foils and paper, are available. Drying Chamber The drying chamber, including the electrical equipment box and control panel, are mounted on a base frame and bolted together to form a single unit. Good thermal insulation of the dryer is ensured by its double-walled construction with insulation between them. The nozzle array, with a length of 1300 mm, is divided into an upper and lower nozzle compartment. A control flap allows for equal ventilation from top and bottom, or more air from top or bottom. Fan and Heater Intense air circulation is ensured by a powerful fan with a capacity of approximately 900-3500 m³/h, combined with a well-tuned heating output, resulting in optimal evaporation performance. A dual-protection monitoring system reduces maintenance and increases the operational reliability of the dryer. The heating capacity is designed for rapid heating and is automatically reduced once the desired temperature is reached to avoid unnecessary power surges. The temperature is controlled by an electronic measuring and control device in the range of 20-250°C. The fresh air is drawn directly into the recirculation fan via a fan. The desired flow rate can be adjusted using a step switch. Technical Specifications Air velocity approx. 4-12 m/sec Air flow approx. 900-3500 m3/h Temperature range up to 250°C Heating output approx. 27 kW Nozzle area 1300 mm Fabric tension continuously adjustable Fresh air supply adjustable to multiple levels Dimensions: LxWxH = 4800 x 1380 x 1750 mm Purchase price: €86,275 Financing through our bank is also possible. komplett-konzept.leasingo.de Other items in other sizes – new and used – can be found in our shop! International shipping costs upon request!

Condition: used, The centrifuge comes with a Beckmann Coulter SX4750 Rotor! Speed: - 200–10,200 RPM (10-RPM increments) - Display in RPM or RCF Time: - Up to 99 h 59 min or continuous - Displays remaining or elapsed time Temperature: - Set range: −10 to +40 °C (1° increments) - Control accuracy: ±2 °C - Ambient range: 10–35 °C Humidity: - < 75% (non-condensing) Acceleration - 10 rates Gbedpfx Aboyfnxdjhoi Deceleration - 11 rates Dimensions (W × D × H): - 76.2 × 62.2 × 34.3 cm - 30.0 × 24.5 × 13.5 in. Weight: - 128 kg (283 lb) Ventilation Clearance: - 7.6 cm (3.0 in.) Finishes: - Coated control panel - Acrylic enamel housing Good working condition. Please check out our other listings as well.

Condition: good (used), KEN 2311-HOS Laboratory washer-disinfector KEN 2311-HOS is a compact washer-disinfector. It is used for washing, disinfecting and drying (option) surgical instruments, rigid endoscopes, instruments for minor invasive procedures, anesthesiology, abdominal and tubular equipment, anesthesia and ventilation tubes, surgical shoes, as well as bottles, trays, glassware. There are several versions: single-door and double-door (pass-through) models. Pass-through machines are always preferred because the physical separation of "dirty" and "clean" areas optimizes the hygienic environment and reduces the risk of cross-infection. ■ User-friendly control panel - ensures correct operation. ■ Possibility of individual program selection. 4 programs as standard ■ Process indicator bar shows how far the program has progressed. ■ Double monitoring of temperature (EN/ISO 15883). ■ Possibility to connect 2 types of chemicals ■ Lockable lower compartment for storage of chemicals. Specifications Mains connection 3 x 400 V,N,J, 50Hz Connected load/fuse 10kW/16A Water connection Cold untreated water: 1 piece, ¾" RG, 5-30°C, 0-30°dH Water connection Hot soft water: 1 piece, ¾" RG, 30-70°C, 0-3°dH Water pressure 200-800 kPa Outlet valve Ø 50 Water quantity (approx.) per withdrawal 13-14 l Pump capacity 370 l/min Gbedpfeiuzkmox Abhei Free depth 2 doors 560 mm Free depth without center plane 510 mm Free width without center plane 510 mm Noise level approx. 59-64 dBa (sound pressure) Tightness class IP 21 (not suitable for dishwasher) Height: 1740 mm Width: 600 mm Depth: 601 mm Condition: This unit was removed in working condition due to a site closure and has been stored since. It appears to be in very good condition. Unfortunately, we do not have the knowledge or instrumentation to test the unit further and Therefore, this unit is being sold as is, in the condition it is pictured here. If you would like to test or inspect this unit prior to purchase, please contact us anytime to schedule an appointment. Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our store! International shipping costs on request!

Condition: good (used), KEN 2311 Laboratory washer-disinfector KEN 2311 is a compact washer-disinfector. It is used for washing, disinfecting and drying (option) surgical instruments, rigid endoscopes, instruments for minor invasive procedures, anesthesiology, abdominal and tubular equipment, anesthesia and ventilation tubes, surgical shoes, as well as bottles, trays, glassware. ■ User-friendly control panel - ensures correct operation. ■ Possibility of individual program selection. 4 programs as standard ■ Process indicator bar shows how far the program has progressed. ■ Double monitoring of temperature (EN/ISO 15883). ■ Possibility to connect 2 types of chemicals ■ Lockable lower compartment for storage of chemicals. Specifications Mains connection 3 x 400 V,N,J, 50Hz Connected load/fuse 10kW/16A Water connection Cold untreated water: 1 piece, ¾" RG, 5-30°C, 0-30°dH Water connection Hot soft water: 1 piece, ¾" RG, 30-70°C, 0-3°dH Water pressure 200-800 kPa Outlet valve Ø 50 Water quantity (approx.) per withdrawal 13-14 l Gsdpfx Abjiuzlvshobi Pump capacity 370 l/min Free depth 2 doors 560 mm Free depth without center plane 510 mm Free width without center plane 510 mm Noise level approx. 59-64 dBa (sound pressure) Tightness class IP 21 (not suitable for dishwasher) Height: 1740 mm Width: 600 mm Depth: 601 mm Condition: This unit was removed in working condition due to a site closure and has been stored since. It appears to be in very good condition. Unfortunately, we do not have the knowledge or instruments to test the unit further and Therefore, this unit is being sold as it is pictured here. If you would like to test or inspect this unit prior to purchase, please contact us anytime to schedule an appointment. Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our store! International shipping costs on request!

Condition: used, This listing is for the Labcold RLPR0517 150L Under-counter laboratory refrigerator The unit is in full working condition and is ready for immediate use The Labcold RLPR0517 is a 150 litre under-counter laboratory refrigerator with a spark-free interior, meaning all potential ignition sources (like internal electrical components) are placed outside the storage chamber. This makes it significantly safer for storing substances that might give off flammable vapours (with appropriate risk assessment). Capacity: ~150 litres suitable for reagents, samples or general laboratory use. Godpeyi Tmnefx Abhobi Style & Size: Undercounter design with external dimensions approx. 835 mm (H) × 600 mm (W) × 600 mm (D). Temperature Range: Maintains between 0 °C and +10 °C; factory set point usually around 5 °C. Interior: Powder-coated steel to ensure durability, ease of cleaning and safety. Shelving: Includes 3 adjustable shelves to organise contents. Defrost: Off-cycle automatic defrost helps maintain performance and reduces frost build-up.

Condition: used, Laboratory fume cupboard, fume cupboard, suction -Connection: Ø 50 mm -Filter: 270 x 270 mm -Dimensions: 700/390/H370 mm -Weight: 31 kg Gbsdpfxjb Uhkgs Abhji

Condition: used, Laboratory power supply, power supply, voltage generator, laboratory power supply -Input: 230 volts AC -Output: 0-30 volts DC -Dimensions: 150/240/H130 mm Godpsb Nkt Defx Abhjbi -Weight: 4.5 kg

Condition: used, Laboratory fume cupboard, fume cupboard, suction -Input: 230 volts AC -Dimensions: 1200/875/H1255 mm -Weight: 176 kg Gedpfxeb Uhkhs Abhobi

Condition: used, Laboratory fume cupboard, fume cupboard, suction Gsdpfxob Uhkfe Abhjbi -Connection: Ø 50 mm -Filter: 270 x 270 mm -Dimensions: 700/390/H370 mm -Weight: 32 kg

Condition: good (used), Laboratory power supply, power supply unit, voltage generator, laboratory power supply device -Input: 230 Volt AC -Output: 24 V 2.5 A Gsdpfxob S Htmj Abhobi -Dimensions: 160/270/H110 mm -Weight: 5.5 kg

Condition: used, Hosokawa Mikropul ACM 2/3 classifier mill used, with suction filter, suction cooler, fan, cyclone, piping, unfortunately the filter is missing Gbodpfxsvcmc Es Abhsi

Condition: like new (used), Year of construction: 2025, Binder M 720 Laboratory Dryer, Like New, Year 2025 PRODUCT DESCRIPTION The M series material testing chambers, featuring a maximum temperature of +300°C and multiple programming options, are perfectly suited for materials testing and ageing studies. Thanks to high airflow, high-performance fans provide rapid heating. KEY FEATURES Temperature range: Gbedpfjyahnusx Abhoi +14°C above ambient temperature up to +300°C High temperature accuracy thanks to APT.line™ technology with increased heating capacity Reinforced fan with adjustable speed Electromechanical exhaust air flap control Intuitive controller with touchscreen and programmable time-segment and real-time functions 2 chrome-plated racks Independent, adjustable class 2 (DIN 12880) temperature safety device and optional independent class 3.1 (DIN 12880) temperature safety device with visual/acoustic alarm selectable on the controller Failsafe function – backup Pt 100 sensor PC interface: Ethernet Internal data logger; measured values can be read in an open format via USB

Condition: excellent (used), Year of construction: 2010, operating hours: 553 h, overall weight: 210 kg, total length: 1,055 mm, total width: 850 mm, total height: 730 mm, Laboratory autoclave: Systec, Gedpjx Dr Ekjfx Abhebi Model: DE-150 Volume: 158L Year of manufacture: 2010 Only 553 operating cycles External dimensions L/W/H: 1055/850/730 mm Weight: approx. 210 kg

Year of construction: 2020, condition: used, This listing is for the Steris Reliance 500XLS Laboratory Glassware Washer Gsdpfoygiitsx Abhsbi The unit is in full working condition and is ready for immediate release The Steris Reliance 500XLS Laboratory Glassware Washer is a high-capacity, automated washing and thermal disinfection system designed for demanding laboratory environments. It provides validated, repeatable cleaning performance for laboratory glassware, utensils, and instruments. Featuring programmable wash cycles, precise temperature control, and robust stainless-steel construction, the 500XLS ensures consistent results while meeting strict laboratory hygiene and compliance requirements. Its large chamber and efficient workflow make it ideal for research, pharmaceutical, healthcare, and industrial laboratories seeking reliable, high-throughput glassware processing

Year of construction: 2015, condition: as good as new (ex-display), machine/vehicle number: 2245, stock-No.:2245 1 used Lab Extrusion-pelletizing Batch line, condition like new, equipped with: Extruder single-screw AlphaTec type AE-S 25-30 single-screw Ø 25 mm – 30 L/D Extruder motor 3 kW- AC, screw speed range up to 130 rpm frequency controlled cylinder air cooled, elec. heating 2 x 3 kW 1x venting athm. port 1x manual screen-pack-changer Ø 42 mm 1x strand-die-head 1x water bath 1.000 x 150 mm 1x strand-pelletizer, intake width 30 mm, motor 1,1 kW – AC control board with PID, melt pressure, speed by frequency converter Trial-run shortly possible, date by appointment Gedpfsd Sg Hrex Abhobi Mire extruders ex our machine-stock Wuppertal Germany available.

Condition: excellent (used), Year of construction: 2020, Mobile Medical Containers Gbedpfjyaz Rcex Abhoi These medical containers provide a safe and secure environment for most medical applications in expedition base camps or mobile field hospitals. Made from high-quality materials that meet hospital standards, these medical containers offer an optimal solution for medical operations under challenging or harsh conditions, providing functional medical space with minimal logistical footprint. 2 x Containers equipped with medical rooms 1 x Container with high-quality office furniture Features: Office furniture / Laboratory equipment Medicine refrigerators Heating asecos hazardous materials cabinet Helios KWL EC ventilation system Mitsubishi air conditioning Esco Airstream Class II microbiological safety cabinets Lighting APC UPS Applications: Disaster relief and military Field clinics Expedition base camps Laboratory and more Container Dimensions: 40-foot container External dimensions: approx. 12.19 m (L) x 2.44 m (W) x 2.59 m (H) Internal dimensions: approx. 12.03 m (L) x 2.35 m (W) x 2.39 m (H) with a volume of approx. 67.7 m³. 45-foot container External dimensions: approx. 13.71 m (L) x 2.44 m (W) x 2.59 m (H) Internal dimensions: approx. 13.55 m (L) x 2.35 m (W) x 2.39 m (H) with a volume of approx. 85 m³. Year of manufacture: 2020 Swap bodies for transporting the containers are available as an optional extra. Item location: Hamburg Purchase by buyer Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! Shipping costs abroad upon request!

Condition: used, Van Der Heijden cooling device Temperature range: 16°C - 22°C Operating time: 250 hours Cooling: 192 hours Compressor: 194 hours Pump 1: 194 hours Pump 2: 61 hours You are welcome to come by for a viewing. We are happy to organize a cost-effective shipping company for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and take a look at our other offers. Gbjdsvv Si Dopfx Abhji The company names and trademarks given are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article can occur and are reserved.

Condition: good (used), laboratory power supply Gbsdpfsb A N Sfjx Abhei -0-1 A -0-20 V -Weight: 5 kg

Condition: good (used), EA Electric Automatic Type: EA-EL 9080-170 B Electronic DC load, USB / Analogue / Master-Slave, Programmable, 80V, 170A, 2.4kW Technical data: Mains voltage 90...264 V AC Mains connection type socket Mains frequency 45...65 Hz Mains fuse T 6.3 Power consumption Max. 90 W Leakage current < 3.5 mA DC input Input voltage 80 V Input power 2400 W Input current 170 A Overvoltage protection range 0...1.03 * UNenn Overcurrent protection range 0...1.1 * INenn Overpower protection range 0...1.1 * PMax Maximum permissible input voltage 88 V Min. input voltage for IMax Approx. 2.2 V Temperature coefficient of the setting values Δ / K current / voltage: 30 ppm Voltage regulation Setting range 0...81.6 V Stability at ΔI < 0.05% Accuracy (at 23 ± 5°C) ≤ 0.1% UNenn Display: Accuracy ≤ 0.1% UNenn Remote sensing compensation Max. 5% UNenn Current control Setting range 0...173.4 A Stability at ΔU < 0.1% UNenn Accuracy (at 23 ± 5°C) ≤ 0.2% INenn Display: Accuracy ≤0.1% INenn Rise time 10...90% INenn < 23 μs Fall time 90...10% INenn < 46 μs Power control Setting range 0...2428 W Accuracy (at 23 ± 5°C) < 0.5% PMax Display: Accuracy ≤ 0.2% PMax Resistance control Setting range 0.04...15.3 Ω Accuracy (at 23 ± 5°C) ≤1% of the final resistance value + 0.3% of INenn Display: Accuracy Included in the accuracy of the control value EL 9080-170 B: Analog interface: Setpoint inputs U, I, P, R Actual value outputs U, I Control signals DC on/off, remote control on/off, R mode on/off Message signals CV, OVP, OCP, OPP, OT, PF, DC on/off Galvanic isolation from the device Max. 400 V DC Gedpfxeuv Eudo Abhebi Sampling rate setpoint inputs 500 Hz Isolation: Input (DC) to housing DC minus: permanent max. ±400 V DC plus: permanent max. ±400 V + max. input voltage Input (AC) to input (DC) Max. 2500 V, short-term Climate: Cooling type Temperature-controlled fans Ambient temperature 0...50 °C Storage temperature -20...70 °C Digital interfaces Built-in 1x USB-B for communication, 1x USB-A for functions, 1x master-slave bus Slot for digital modules Optional: CAN, CANopen, Profibus, Profinet, RS232, Ethernet, ModBus TCP, Ether- CAT Galvanic isolation from the device Max. 400 V DC Connections: Rear Share bus, DC input, AC input, Sense, analog interface, USB-B, Master- slave bus, interface module slot Front USB-A Dimensions: Housing (WxHxD) 19" x 2 U x 464 mm Total (WxHxD) 483 mm x 88 mm x 538 mm Standards EN 61010-1:2007-11, EN 61000-6-2:2005, EN 61000-6-3:2006 Class B Weight ≈ 11 kg Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.