Used Gastronomy Resolution for sale (1,183)

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1800005039, travel distance X-axis: 360 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 240 mm, controller model: NUM 1050, swivel angle B-axis (max.): 120 °, No minimum price – guaranteed sale to the highest bidder! The machine is equipped with grinding and eroding functions. The machine was refurbished in 2016. The latest service report for the machine is enclosed. Guodszb Dtpspfx Albsc Optionally, a variety of spare parts can also be purchased in addition to the machine. TECHNICAL DETAILS Travel range X-axis: 360 mm Travel range Y-axis: 240 mm Travel range Z-axis: 240 mm Swivel axis B: ±120° Resolution transverse axis X: 0.0001 mm Resolution feed axis Z: 0.0001 mm Resolution vertical axis Y: 0.0001 mm Resolution swivel axis B: 0.0001° Rapid traverse transverse axis X: 10 m/min Rapid traverse feed axis Z: 10 m/min Rapid traverse vertical axis Y: 10 m/min Rapid traverse swivel axis B: 6,500°/min MACHINE DETAILS Control: NUM 1050 Connection power without robot: 13 kVA Compressed air supply: 6 bar Compressed air connection diameter: 11 mm Operating hours (according to counter): 4,550 h EQUIPMENT Electrostatic filter system Documentation Note: The machine has contamination (oil stain) on the glass level gauge. Therefore, a complete on-site test is currently not possible.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 011.257.90.043, center height: 175 mm, center width: 1,000 mm, controller manufacturer: Fanuc, TECHNICAL DETAILS Maximum center height: 175 mm Distance between centers: 1,000 mm Longitudinal slide Maximum longitudinal slide travel: 1,050 mm Cutting speed (vt): 0.0001–10,000 mm/min Resolution: 0.0001 mm Table tilt: max. 8.5° Guodpjzb Hxnofx Albjc Cross slide Maximum cross slide travel: 275 mm Cutting speed (vt): 0.0001–10,000 mm/min Resolution: 0.0001 mm MACHINE DETAILS Control system manufacturer: Fanuc

Condition: ready for operation (used), Year of construction: 2013, operating hours: 2,780 h, functionality: fully functional, workpiece weight (max.): 150 kg, grinding wheel diameter: 660 mm, center height: 270 mm, center width: 1,700 mm, grinding diameter: 300 mm, spindle speed (max.): 1,000 rpm, No minimum price – guaranteed sale to the highest bidder! Gusdpfx Ajzarx Delbsc TECHNICAL DETAILS Workpiece Grinding diameter in rotary grinding, max.: 220 mm Grinding diameter in cylinder grinding, max.: 300 mm Rotary diameter over table, max.: 300 mm Passage in the steady rest, min. / max.: 20 / 90 mm Workpiece weight between centers, max.: 150 kg Center height above table: 270 mm Distance between centers: 1,700 mm Grinding length with fixed tailstock: 1,500 mm Grinding length with special equipment: 1,300 mm Diameter of the chuck: 180 mm Tailstock quill travel: 50 mm Grinding wheel Grinding wheel diameter, max.: 660 mm Grinding wheel width, min. / max.: 20 / 80 mm Peripheral speed, max.: 35 / 63 m/s Grinding wheel for concave cam profiles Diameter with electro spindle, min.: 100 mm Grinding wheel width, min. / max.: 20 / 50 mm Peripheral speed, max.: 35 / 50 m/s Grinding spindle head X-axis Travel: 490 mm Measuring resolution: 0.0001 mm Workpiece head C-axis Speed range of workpiece spindle: 1 - 1,000 rpm Speed range of contour grinding spindle: 1 - 400 rpm Torque on the spindle: 80 Nm Resolution: 0.0001 ° Table Z-axis Measuring resolution: 0.0001 mm MACHINE DETAILS Drive power of the motors Grinding spindle motor: 7.5 / 15 kW Workpiece motor, C-axis: 12 W Dimensions & Weight Dimensions (L x W x H): 5,500 x 2,600 x 2,000 mm Total weight: 9,850 kg EQUIPMENT Automatic balancing device, programmable Grinding spindle head X-axis with linear motor Optical scale on the X-axis Workpiece head C-axis with encoder Table Z-axis with linear motor Optical scale on the Z-axis Workpiece motor, direct drive type, C-axis Grinding spindle motor, direct drive type Fixed tailstock Tailstock quill Note: The machine can be powered up for inspection for an additional cost of approximately €12,000.

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 5B0S000433, No minimum price – guaranteed sale to the highest bidder! The new price of the microscope was approximately €100,000! Further technical details can be found in the attached data sheet! TECHNICAL DETAILS Maximum magnification: x1000 Camera VHX-7100 Sensor size: 1/1.7 inch Sensor type: 12.22-megapixel CMOS sensor Total pixels (H x V): 4,168 × 3,062 Virtual pixels (H x V): 4,024 × 3,036 High speed (H x V): 2,048 × 1,536 High resolution, 4K mode OFF (H x V): 2,880 × 2,160 High resolution, 4K mode ON (H x V): 4,000 × 3,000 High resolution (H x V): 12,000 × 9,000 Electronic shutter speed: 1/30, 1/60, 1/120, 1/250, 1/500, 1/1,000, 1/2,000, 1/5,000, 1/9,000, 1/19,000 Supercharge shutter speed: 0.01-s steps from 0.03 to 4 s LCD monitor Size: 27-inch color LCD Screen size (H x V): 596.16 × 335.34 mm Pixel pitch (H x V): 0.15525 × 0.15525 mm Number of pixels (H x V): 3,840 × 2,160 Display colors: approx. 1.07 billion Viewing angle: ±89° horizontal, ±89° vertical VHX-S770E stand Travel range of the XY stage: ±50 mm Size of the XYθ stage (surface): 233 × 185 mm Speed of the motorized XY stage max.: 20 mm/s Travel range of the Z stage: 49 mm Load capacity: 5 kg Weight: 25.3 kg MACHINE DETAILS Connection: Digital Dimensions & Weight Dimensions without protruding parts (W x H x D): 635 x 450 x 132 mm Weight of the control unit: 10.8 kg Gujdpfx Alezb Eixobsc EQUIPMENT KEYENCE VHX-X1 microscope unit Control console VHX-AX1D Processing unit OP-88885 Camera unit VHX-7100 Objective lens VH-Z00T High-performance objective lens VH-Z100 Motorized revolving head Motorized precision stand VHX-S770E Large motorized XY stage Software module VHX-H6M Ring light and illumination adapter OP-88164 3D profile measurement Manufacturer documentation Original accessories

Condition: good (used), Year of construction: 2004, Ref. -No.: 10612 Manufacturer: LIEBHERR Type: LC 3002 Year of construction: 2004 Type of control: CNC-Steuerung Control: LIEBHERR Storage location: Halberstadt Country of origin: Germany Serial no.: 30XX Max. Module: 30 mm Min. Module: 4 mm Max. Workpiece Diameter: 3000 mm ambient temperature: +15...+38 ° cutting speed: 25 - 250 m / min Milling head swivel angle: 0,001 ° Resolution accuracy: 0,1 Degree Workpiece table load: 300 kN Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Max. rated current: 230 A Fuse in the supply line: 250 A Godpfezc D A Tjx Albjuc Max. milling diameter spur gears/helical gears: 3.000 mm Further information: Suitable for internal and external gear cutting. The machine can be viewed by appointment.

Condition: good (used), Year of construction: 2000, Ref. -No.: 10468 Manufacturer: DECKEL MAHO Type: DMU 80 Year of construction: 2000 Control: Heidenhain Millplus Storage location: Halberstadt Country of origin: Japan Machine-No.: 111xxxxx X-Travel: 800 mm Y-Travel: 700 mm Z-Travel: 600 mm Number of T-slots: 9 / 14 Clamping Area: Ø 900 x 630 mm T - slot spacing: 63 mm Tool Taper: SK 40 Tool changer: 30 Spindle Speed: 12.000 RPM Max. Torque: 2659 Nm Operating hours: 67.452 H Center hole: Ø 50 mm Holding torque: 4500 Nm Max. rotation of the table top: 10,7 rpm Godpfxjzc Dzie Albouc Feed: 3600 °/min. Resolution of the measuring system: 0,001 ° NC rotary table: 800 kg NC swivel rotary table: 600 kg Further information: - Clamping table 900 x 630 mm - Chip conveyor, sheet metal technology - Belt filter system, manufacturer Interlit - Type SK 200-760 - Oil mist separator - Set of tool holders, - Workbenches - 2x 6 drawers - Vise - Jaw width 125 mm - Roller shutter cabinet with 1 door The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 2002, Ref. -No.: 10442 Manufacturer: LIEBHERR Type: LC 122 Year of construction: 2002 Type of control: CNC-Steuerung Control: LIEBHERR PC NC Storage location: Halberstadt Country of origin: Germany Hob diameter max.: 90 mm Table Diameter: 145 mm Max. Module: 3 mm Smallest number of millable teeth: 4 Milling head swivel angle: +/- 45 ° Gjdpfx Aeym Nbcelbjuc Resolution accuracy: 0,1 Degree Workpiece table load: 17 kN Milling speed: 450 - 4.500 1 / min Operating voltage: 400 V control voltage: 24 V frequency: 50 Hz Max. rated current: 55 A Fuse in the supply line: 63 A Max. milling diameter spur gears/helical gears: 125 mm Max. milling width spur gears/helical gears: 250 (axial) mm Spindle stroke: 180 mm Max. cutter width: 200 mm Further information: Ambient temperature: +12°.....+40° Operating noise: 78 dB (A) Milling head designation: motor milling head Workpiece axis: vertical Stand: movable Table: fixed Milling method: axial hobbing in the same or opposite direction The machine can be inspected under power by arrangement.

Condition: used, mileage: 9,231 km, power: 120 kW (163.15 HP), first registration: 09/2024, fuel type: diesel, overall weight: 2,800 kg, color: white, gearing type: automatic, number of seats: 3, total length: 5,370 mm, total width: 1,928 mm, total height: 1,910 mm, loading space length: 2,566 mm, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Errors and prior sale excepted! Internal number: 0935. 4438382 ----EQUIPMENT * Airbag: Thorax and pelvis side airbag for passenger * Airbag: Thorax and pelvis side airbag for driver * Towing capacity: 2,500 kg * Seats: Double passenger seat * Brake assist, active * Electric parking brake * HOLD function * Wooden floor (cargo area) * Interior lining for cargo area up to roof height - wood * LED lighting strip in cargo area * Cargo securing rail system * Navigation accessory: Live Traffic Information * Navigation * Package: Winter package - Heated driver and passenger seat - Heated windshield washer nozzles - Heated steering wheel * Tire pressure monitoring - front and rear axles (wireless) * Rear view camera, high-resolution, with guide lines * Rear door: double rear doors, opening up to side wall * Seat: Adjustable seat cushion depth for driver * Blind spot assist * Full partition with 1 window * Traffic sign assist * Electronic Stability Program (ADAPTIVE ESP) with integrated anti-lock braking system (ABS) - Traction control (ASR) - Electronic brakeforce distribution (EBV) - Brake assist (BAS) * Wiring for trailer socket - electrical wiring for trailer power supply - without towbar control unit * ATTENTION ASSIST * Storage: Front cup holder * Screw-in tow hook front/rear * Passenger airbag * Driver airbag * Exterior mirrors electrically adjustable and heated * Outside temperature display * Battery: buffer battery for start-up * Battery: AGM battery 12 V / 92 Ah * Fastening points in roof frame * Hill-start assist Gujdpfx Aljwmz Dwsbsc * Third brake light * Adaptive brake lights * Comfort overhead control unit * Diesel particulate filter * Electronic tachometer * Headlight assist * Electric window lifts driver/passenger * Alternator 14 V/250 A * Alternator management * Speed limit 210 km/h * Transmission: 9G-TRONIC * Weight variant 2,800 kg * Seat belt warning for driver/passenger seat * Lockable glove compartment lid * Side cargo area lining * Regulated air conditioning (Tempmatic) * Instrument cluster with pixel-matrix display - operated via multifunction steering wheel buttons - Analog gauges for speedometer and tachometer or fuel level and coolant temperature - High-quality pixel-matrix display in white and red between the large analog gauges * Comfort driver's seat * Comfort closing * Communication module (LTE) for digital services * Headrests * Large fuel tank, approx. 70 liters * Paint: solid color * Steering wheel adjustable in height and reach * Headlight range adjustment * Mercedes-Benz emergency call system communication module (LTE) for digital services including breakdown management * Multifunction steering wheel * Interior lighting in passenger compartment * Navigation: pre-installation * Fog lights * Upholstery: Fabric Caluma black * Radio/Telematics, Audio 10 * Radio: Digital Radio DAB * Radio: Radio generation 2 * Electromechanical power steering * Seat: Lumbar support driver seat * Seats: Driver seat Plus * Active lane keeping assist * Start-stop function * 12V socket * Cruise control * Full partition * Pre-installation for Remote Services Plus * Immobilizer * All-around heat-insulating glass * Central locking with remote control * Registered as commercial vehicle ... and much more. ----The vehicle has not been reconditioned! Nationwide delivery available at an additional cost. Errors and prior sale excepted. We are happy to accept your vehicle in trade. Financing/leasing possible with no down payment! Do you have questions? We ar

Condition: used, mileage: 59,986 km, power: 125 kW (169.95 HP), first registration: 04/2023, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 6,967 mm, total width: 2,020 mm, total height: 2,616 mm, loading space length: 4,307 mm, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Subject to errors and prior sale! Internal number: 1043. P575696 ----EQUIPMENT * Cup holder at front * Airbag on passenger side * Trailer coupling - for increased trailer load 3.5t * 13-pin trailer socket in conjunction with generator 14 V/250 A * Tachograph operation at front under roof lining * Seats: passenger seat two-seater * Brake assistant, active * Ceiling light in loading/passenger compartment - with door contact * Anti-theft alarm system and burglar alarm system * Diesel filler cap in red * PSM standard contact extension * Misfueling protection * Generator 14 V/250 A * Seat belt warning device for passenger seat * Grab handle for driver and passenger entry * Wooden floor (loading area) * Interior paneling of loading area up to roof height - wood * Intelligent tachograph EU * Air conditioning controlled Tempmatic * Comfort roof control unit * LED light strip in loading area * Load securing: Lashing rails on side wall on roof frame * Load anchoring rail system * Cable duct on rear portal * Cable duct on side wall * MBUX multimedia system with 7-inch touchscreen High-resolution 7-inch touchscreen (960 x 540 pixels) AM/FM radio with double tuner Bluetooth connectivity with audio streaming and hands-free function Smartphone integration via Android Auto or Apple CarPlay Multimedia connection unit for connecting portable devices via a USB-C interface 4 x 25 W output power, sound adjustment, separate volume adjustment for audio and telephone 2-way loudspeakers at the front * Steering wheel: Multifunction steering wheel * Package: Charging package for instrument panel The charging package expands the charging options in the cockpit with two 5V USB-C ports and a 12V socket. A USB port and the 12V socket are installed in the middle storage compartment of the instrument panel and another USB port in the lower area of the center console. This allows electrical devices such as mobile phones to be charged within reach of the driver and passenger. * Package: Parking package with rear view camera * Cross member with step * Radio: Digital radio DAB * Wheel arch can be loaded * Rain sensor * Spare wheel holder with jack - under frame end * Rear door with two wings, opening to the side wall * Seats: Comfort version suspension seat, driver's seat * Seats: Driver's seat box, low * Seat heating on driver's side * Cruise control * Partition wall with 1 window * USB 5 V socket * Load securing: Lashing rails on side wall on parapet belt * Front axle with increased load capacity * Pre-installation for electrics, parameterizable special module * Heat-insulating glass with band filter on windscreen * ADAPTIVE ESP * Storage above windscreen * Storage compartment under cockpit * Towing eye at the rear * Axle ratio i = 3.923 * Driver's side airbag * Electric adjustable and heated exterior mirrors * Outside temperature display * Hill start assist * Brake light, third * Brake lights, adaptive * DPF, SCR * Tachometer * Entry handle on corner pillar, rear right * Driving light assistant * Chassis stabilization level I * Electric window lifter, front * Noise reduction measures * Gearbox: 9G-TRONIC * Seat belt warning device * HOLD function * Grab handle for loading area sliding door * Main tank 71 liters * Instrument panel and instrument cluster * KEYLESS start * Child safety lock on the rear doors * Headrests * Paintwork: Uni * Steering wheel, vertical and axial * Headlight range adjustment * Marker lights, side * Mercedes-Benz emergency call system Guodpfx Aley Nvcmsbjc * Without l

Condition: used, mileage: 43,570 km, power: 110 kW (149.56 HP), first registration: 03/2024, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 5,932 mm, total width: 2,020 mm, total height: 2,638 mm, loading space length: 3,273 mm, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Subject to errors and prior sale! Internal Number: 1300. P474509 ----EQUIPMENT * ATTENTION ASSIST * Storage above windshield * Active Distance Assist DISTRONIC * Passenger-side airbag * Airbag: Thorax bag, pelvis bag, and side bag for front passenger * Airbag: Thorax bag, pelvis bag, and side bag for driver in V-shape with single-pole battery main switch * Active Lane Keeping Assist * Acoustic Package in conjunction with MBUX * Engine oil level indicator during cold start * Rear door step * Electrically adjustable and heated exterior mirrors, left and right * Electrically folding exterior mirrors * Exterior mirrors without indicators * Single-pole battery main switch * Front side indicators * Active Brake Assist * Ceiling light in cargo/passenger compartment - with door contact * Anti-theft alarm and intrusion alarm system * Digital Owner's Manual * Entry handle on rear right corner pillar * Electrics for trailer socket * Chassis stabilization level I * Vehicle preparation for a trailer load of up to 2000 kg * Brakes: Electric parking brake * 14 V/220 A generator in conjunction with roof air conditioning * Speed limiter 120 km/h * Seat belt reminder for front passenger seat * Grab handle for driver and front passenger entry * Folding lid for storage compartment * Terminal block for electrical connections on the driver's seat base * Tempmatic air conditioning * Instrument cluster with color display * Instrument cluster with color display in V with Brake/Traffic Sign/Distance Assist/MBUX * Comfort roof control panel * LED high-performance headlights * LED light strip in the cargo area * Cargo area lighting via motion detector * Leather-wrapped steering wheel * Cable duct on the rear portal * Cable duct on the side panel * Steering wheel with adjustable tilt and height * Navigation accessories: Live Traffic Information * MBUX multimedia system with 7-inch high-resolution touchscreen 7-inch touchscreen (960 x 540 pixels) AM/FM radio with dual tuner Bluetooth connectivity with audio streaming and hands-free function Smartphone integration via Android Auto or Apple CarPlay Multimedia connection unit for connecting portable devices via a USB-C interface 4 x 25 W output power, tone adjustment, separate volume settings for audio and phone 2-way speakers at the front * Marker lights, side * Steering wheel: Multifunction steering wheel * Navigation Voice control LINGUATRONIC Wi-Fi hotspot Multimedia connection unit for connecting portable devices via an additional USB-C interface Center-fill speaker for improved sound and voice output - improved hands-free function Two-phone operation Digital owner's manual * Navigation: 3 years of free map data updates * Halogen fog lights * Package: Parking package with 360° camera Parking assistant Rear Cross Traffic Alert Drive Away Assist * Configurable special module * Radio: Digital radio DAB * Rain sensor * Tire pressure monitoring - on front and rear axle (wireless) * Spare tire holder under the frame end * Reversing alarm * Double rear door, opening to the side wall * Key: multi-button remote control * Orange seat belts, driver and front passenger * Seats: Driver's seat plus * 5 V USB socket * Blind spot assist * VIN visible from the outside Godpfx Aezci Axjlbjuc * Traffic sign assist * Switch panel preparation * Heat-insulating glass with band filter on the windshield * Additional rear door lock at 90 degrees * ADAPTIVE ESP * Driver's side airbag * Outside temperature display * Hill start assist * Third brake light * Adapti

Condition: used, mileage: 39,440 km, power: 125 kW (169.95 HP), first registration: 02/2024, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,932 mm, total width: 2,020 mm, total height: 2,620 mm, loading space length: 3,272 mm, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Subject to errors and prior sale! Internal number: 1170. P653045 ----EQUIPMENT * Smartphone storage including wireless charging * Storage above roof lining * Rear door step Gjdpfx Aewapvbslbouc * Electrically folding exterior mirrors * Exterior mirrors without indicators * Seats: Two-seater passenger seat * Front side indicators * Active Brake Assist * Ceiling light in cargo/passenger compartment - with door contact * Anti-theft alarm and intrusion alarm system * Digital owner's manual * Entry handle on rear left corner pillar * Electrical system for trailer socket in conjunction with 14 V/250 A generator * Chassis stabilization level I * Misfueling protection * Seat belt warning system for passenger seat * Grab handle for driver and passenger entry * 93-liter main tank * Wooden floor (cargo area) * Interior trim in cargo area up to roof height - wood * Hinged lid for storage compartment * Tempmatic air conditioning system * Comfort overhead control panel * Seats: Comfort driver's seat * Cargo area lighting via motion detector * Load securing: Tie-down rails on the side wall and roof frame * Load anchoring rail system * Cable duct on the rear portal * Cable duct on the side wall * Navigation accessories: Live Traffic Information * MBUX multimedia system with 7-inch touchscreen. High-resolution 7-inch touchscreen (960 x 540 pixels). AM/FM radio with dual tuner. Bluetooth connectivity with audio streaming and hands-free function. Smartphone integration via Android Auto or Apple CarPlay. Multimedia connection unit for connecting portable devices via a USB-C interface. 4 x 25 W output power, tone adjustment, separate volume settings for audio and phone. 2-way speakers at the front. * Marker lights, side. * Steering wheel: Multifunction steering wheel * Navigation voice control: LINGUATRONIC Wi-Fi hotspot. Multimedia connection unit for connecting portable devices via an additional USB-C interface. Center-fill speakers for improved sound and voice output. Improved hands-free function. Dual-phone operation Digital owner's manual * Navigation: 3 years of free map updates * Fog lights with cornering lights * Acoustic package * Instrument panel charging package The charging package expands the charging options in the cockpit with two 5V USB-C ports and a 12V socket. One USB port and the 12V socket are installed in the center storage compartment of the instrument panel, and another USB port is located in the lower section of the center console. This allows charging of electrical devices such as mobile phones within easy reach of the driver and front passenger. * Package: Parking package with 360° camera, Parking Assistant, Rear Cross Traffic Alert, Drive Away Assist * Radio: Digital DAB radio * Wheel arch loading * Double rear door, opening to the side wall * Vibration damper * Heated driver's side seat * Heated passenger seat (2-seater) * Power socket in passenger compartment * Cruise control * 5 V USB socket * Load securing: Tie-down rails on side wall on parapet belt * Front axle with increased load capacity * Electrical pre-installation, configurable special module * Elimination of vehicle lowering * Long-range nozzles in instrument panel * ADAPTIVE ESP * Storage above windshield * Storage compartment under cockpit * Rear towing eye * Axle ratio i = 3.923 * Driver's side airbag * Electric adjustable and heated exterior mirrors * Outside temperature display * Hill start assist * Third brake light * Adaptive brake lights * DPF, SCR * Tachometer * Entry handle on r

Condition: used, mileage: 32,727 km, power: 120 kW (163.15 HP), first registration: 07/2024, fuel type: diesel, overall weight: 2,800 kg, color: white, gearing type: mechanical, number of seats: 3, total length: 5,140 mm, total width: 1,928 mm, total height: 1,909 mm, loading space length: 2,336 mm, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Errors and prior sale excepted! Internal number: 0648.4418461 ----EQUIPMENT * Airbag: Thorax bag and pelvis side airbag for passenger * Airbag: Thorax bag and pelvis side airbag for driver * Seats: Two-passenger seat * Active brake assist * Rear camera (non-retractable) * Heated windshield washer system * Wooden floor (cargo area) * Interior paneling in cargo area up to roof height – wood * LED light strip in cargo area * Load securing rail system * Navigation accessory: Live Traffic Information * Navigation * Package: Park – Rearview camera – PARKTRONIC * Winter package – Seat heating for driver and passenger seat – Heated washer jets – Heated steering wheel * Tire pressure monitoring – on front and rear axle (wireless) * Rear door: Rear swing doors, opening up to side wall * Seats: Driver’s seat cushion depth adjustment * Seat heating on passenger side * Seat heating on driver’s side * Blind spot assist * Full partition with 1 window * Traffic sign assist * Electronic stability program (ADAPTIVE ESP) with integrated anti-lock braking system (ABS) – Traction control system (ASR) – Electronic brake-force distribution (EBV) – Brake assist (BAS) * Electrical wiring for trailer socket – electric wiring for trailer power supply – without trailer control unit * ATTENTION ASSIST: ATTENTION ASSIST supports the driver during long, monotonous journeys by monitoring attentiveness. If signs of fatigue or increasing inattentiveness are detected, it recommends a break. * Front cup holders * Removable tow hook front/rear * Axle ratio i = 3.267 * Airbag passenger side * Airbag driver side * Exterior mirrors electrically adjustable and heated, left and right * Outside temperature display * Battery: Buffer battery for starting process * Battery: AGM 12V / 92Ah * Attachment points in the roof frame * Hill-start assist * Third brake light * Adaptive brake lights * Comfort roof control unit * Diesel particulate filter * Electronic tachometer Gujdpfx Alexci Hcobsc * Light assist – automatically activated headlights * Power windows driver/passenger – with anti-trap protection, quick lowering and raising * Generator 14 V / 250 A * Generator management – Generator management helps reduce fuel consumption and CO2 emissions. The alternator is disengaged, and the onboard electronics are powered by the battery when sufficiently charged. This relieves the engine from charging the battery during acceleration, for example. During braking and overrun operation on downhill runs, the alternator is re-engaged, and the vehicle’s kinetic energy is recuperated to charge the battery. * Speed limiter 210 km/h * Transmission: 6-speed manual gearbox TSG 380 * Weight variant 2,800 kg * Seat belt reminder for passenger seat * Seat belt reminder for driver seat * Lockable glove compartment * Tailgate * Side interior paneling in cargo area * Climate control – Tempmatic * Instrument cluster with pixel matrix display – Operated via multifunction steering wheel buttons – Round dials for speedometer and tachometer or fuel and coolant gauges – High-resolution white and red pixel matrix display between large round dials * Comfort driver’s seat * Comfort window opening/closing * Communication module (LTE) for digital services * Headrests (2) in front * Large fuel tank, approx. 70 liters * Solid paint * Steering wheel

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, 3D Coordinate Measuring Machine | Brand: MAUSER/ZEISS | Type: KMZ-G 602520 | Year of manufacture: 1988/2003 Optionally available with an air-conditioned hall. The machine has been calibrated regularly by ZEISS. The last calibration was performed on August 7, 2025, the next calibration (recommended) is scheduled for August 2026. TECHNICAL SPECIFICATIONS:: Measuring ranges (Length x Width x Height): 6.000 x 2.500 x 2.000 mm Travels: Guodpfsy Iub Sox Albec - X-axis: 6.000 mm - Y-axis: 2.500 mm - Z-axis: 2.000 mm - Length measurement uncertainty according to VDI/VDE 2617: U3 = (5,0 + L/250)µm, V2 = 3,5 µm - Length measurement uncertainty according to ISO 10360-2: MPE_E = (5,0 + L/250)µm - Environmental conditions for maintaining the specified accuracy: * Temperature range: 21°C +/- 3°K * Temperature fluctuation: 0,5°K/h, 1,0°K/d, 0,5°K/m - Environmental conditions for operation: * Temperature range: + 15°C up to 35°C * Humidity: 30 up to 70% General features, Equipment: - Portal measuring machine with ultra-precision guides and ball-screw drives - Second Y-axis with granite guideway and air bearing - High-resolution Zeiss scales - Positive-drive mechanisms in all three axes - Collision protection for the quill and probe head (for VAST-TK) for manual and setup modes - Safety position for crane interlock - Reference temperature compensation - Microcomputer control - Practice piece: cube, star-shaped stylus - Reference probe D = 8 mm, length: 115 mm - Reference standard D = 30 mm - includes basic software package - Load-bearing capacity: Limited only by the foundation design - Measuring system: VAST - Software: Zeiss CALYPSO - Documentation Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale -

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, overall weight: 55 kg, total length: 700 mm, total width: 1,880 mm, total height: 850 mm, TOP work table AT 1880 with stainless steel top Work table for gastronomy/bakery Stainless steel worktop Lower storage shelf Reinforced welded construction Approx. dimensions: 1880 x 700 x 850 mm (W x D x H) Gedeyhy E Sspfx Albsuc Used unit, cleaned Option: Delivery service New castors/wheels We have many more work tables in stock!

Condition: excellent (used), Soup production line The line has been in operation for a very short time, only 3 years, and has been expanded with a mixer for producing hummus and cream soups. The cost of a new line of this type is two million euros. The line consists of the following equipment: - B200-500VA mixer with turbo booster - Main tank on a frame, 2017 - Valve station and frequency inverters - Containerized boiler for steam, gas-powered, 2017 - Climaveneta chiller, 2013 - FBL cooling tunnel, FL-10-2017 type - Spolex cup transport system, 2017 - OCS Checkweighers GmbH X-ray inspection device, 2017 - Radwag checkweigher, 2017 - PAG Dozo-Pak automatic packaging machine - Spolex cup drying system, 2017 - JET 3 inkjet printer - Documentation in Polish and English, declarations of conformity. Godpoyc E Rfefx Albsuc Line for cooking and cooling ready meals, creams, soups, broths, jams, and marmalades, traditional and international dishes, sauces, and pastes. Installed as new in 2017. Thanks to the use of the Turbo Mixer B200, you can produce hummus and cream soups. Please see my other listings.

Condition: excellent (used), Year of construction: 2019, operating hours: 403 h, functionality: fully functional, turning length: 1,200 mm, spindle bore: 120 mm, controller model: Siemens 840 Dsl, Equipment: documentation/manual, Technical data: Turning length 1200 mm Chuck diameter 350 mm Working stroke X top/bottom 200 mm Working stroke Y. axis 210 mm (+130/-80) Working stroke Z. axis 1200 mm Maximum travel speed W/X/Y/Z meters/minute 45/40/40/46 Ball screw diameter W/X/Y/Z mm 40/40/40/40 Profile rail guide, B/X/Y/Z mm 45/45/45/55 Tool flight circle 700 mm Maximum center distance 1200 mm Main spindle/counter spindle Spindle bearing diameter 120 mm/160 mm Spindle passage 65/105 mm Spindle bore diameter 80/120 mm Spindle flange/spindle head DIN 55026 A6 / A8 Drive power 100% ED 22 KW/67.4 Drive power, 40% ED 24 KW/80 Nominal speed 1400 rpm Maximum speed 5,700 rpm Torque 100% ED 150 nm/585 Torque 40% ED 191 nm/795 C-axis resolution 0.001 degrees Both turrets: Tool holder: VDI 40 Maximum speed rpm 6000 torque drive 12,000 speed drive Maximum drive power kW: 28.5 torque drive 23.5 speed drive Gedpjvw Upcofx Albsuc Maximum torque (25% ED) Nm: 85 torque drive 56 speed drive Dimensions: 4500 x 2500 x 2500 Weight approx. 16000 kg Control: Siemens 840 Dsl

Condition: used, Year of construction: 2014, 2 Vertical Turning Machines (Tandem) Manufacturer: EMAG Model: VL 3 Year: 2014 Control: Fanuc 31/32i TECHNICAL SPECIFICATIONS FOR THE VL3 MACHINE (Subject to errors and omissions) WORKING AREA Chuck diameter: 170 mm Swing diameter: 210 mm X-travel: 400 mm Z-travel: 200 mm Loading time (depending on clamping device): 2–4 sec MAIN SPINDLE Spindle flange to DIN 55026, size 5 Spindle bearing diameter (front): 80 mm Maximum spindle speed: 7,500 rpm MAIN DRIVE AC asynchronous motor Power at 40/100% duty cycle: 25/16 kW Full power from spindle speed (100% ED): 1,800 rpm Torque at 40/100% duty cycle: 134/85 Nm FEED DRIVE Rapid traverse speed, X axis: 60 m/min Rapid traverse speed, Z axis: 30 m/min Feed force (X and Z): 5 kN Ball screw diameter (X/Z): 40 mm Guodpfeytn Emjx Albjc TURRET Cylinder shank mount DIN 69880, 12 positions Shank diameter: 40 mm ELECTRICAL EQUIPMENT according to VDE 0113 Operating voltage: 400 V Control voltage – DC: 24 V; AC: 230 V Frequency: 50 Hz Connected load without/with live tool: 28 / 31 kW Supply line protection: 50 A DIMENSIONS & WEIGHT Length: 2,500 mm Length incl. chip conveyor: 3,600 mm Width: 1,900 mm Height: 2,300 mm Weight: approx. 5,500 kg Linear roller guides in the X-axis located outside the machining area. GANTRY SLIDE INCLUDING SLIDE GUIDE Motor spindle mounting AC synchronous drives for X and Z axes Encapsulated linear measuring systems Resolution all longitudinal axes: 0.001 mm (absolute measurement) Rapid traverse: X axis 60 m/min, Z axis 30 m/min 1 MOTOR SPINDLE size 5 DIN 55026 Max. speed: 7,500 rpm Power at 40/100% duty cycle: 25/16 kW Torque at 40/100% duty cycle: 134/85 Nm HYDRAULIC UNIT with gear pump. CENTRALIZED OIL SUPPLY for lubrication of ball screws and roller guides COOLING UNIT Controls the machine’s thermal balance. Keeps motor spindle, turret, and control cabinet at ambient temperature. TOOL CARRIER SYSTEM 1 12-STATION TURRET with mounting holes Ø40 DIN 69880 Shortest indexing time via electric motor drive Cooled for consistent accuracy Internal coolant supply to tool in cut position WORKPIECE STORAGE & TRANSPORT SYSTEM 1 CIRCULATING WORKPIECE FEEDER Storage capacity: 27 workpieces (Ø 30–85 mm), or 18 workpieces (Ø 30–130 mm), Max. workpiece height: 100 mm Loading height: 1020 mm Chain-type accumulating conveyor with transport prisms Workpieces are NC-positioned for clamping device take-over. The pick-up spindle retrieves blanks from the conversion-free storage and conveyor system. COOLANT AND CHIP REMOVAL SYSTEM 1 COOLANT SUPPLY with integrated coolant tank, capacity approx. 300 l, coolant filter Coolant pump delivery rate: approx. 80 l/min at 7 bar 1 CHIP CONVEYOR Discharge height: 1,250 mm, hinge belt design 1 EMULSION MIST EXTRACTION from the machining area ADDITIONAL EQUIPMENT AND EXPANSIONS WORKPIECE STORAGE & TRANSPORT SYSTEM 1 INTERFACE FOR EMAG TRANSFER AND FLIP UNIT OP20 COOLANT AND CHIP REMOVAL SYSTEM 1 FLUSHING NOZZLES: 2x in working area, 1x in machine base HYDRAULICS & PNEUMATICS 1 MAINTENANCE UNIT FOR COMPRESSED AIR with mounting 1 PICK-UP DEVICE BLOW-OFF (2 nozzles, WITHOUT maintenance unit – see maintenance unit compressed air)

Condition: good (used), Year of construction: 2006, 1 used 4-axis horizontal machining center Brand Haas Type EC 1600 Year of manufacture 2006 Travel ranges X-axis 1626 mm Y-axis 1270 mm Z-axis 813 mm Spindle centerline to table 304 mm Spindle SK 50 Max. rated power 22.4 kW Max. speed 7500 rpm Max. torque 460.0 Nm 700 rpm Table size Length 1626 mm Width 914 mm T-slot width 16.00 mm T-slot center-to-center distance 125 mm Number of T-slots in standard configuration: 7 Max. load capacity on table (evenly distributed) 4536 kg Integrated 4-axis (B-axis) Table 1626 mm x 813 mm mm Guedjv N Di Aspfx Alboc Clamping surface diameter 762 mm Adjustability 360° Max. workpiece swing diameter 1270 mm Table load 4536.0 kg Max. rated power 3.7 kW Rotational torque (continuous) 2712 Nm Backlash 30 arc-sec Gear ratio 500:1 Braking torque 5423 Nm Minimum resolution 0.001° Indexing accuracy ± 30 arc-sec Repeatability 15 arc-sec Rapid traverse rate on B axis 36°/sec Max. feed rate for machining on B axis 36°/sec Spindle centerline to table 146 mm Max. feed rate for machining in x, y, and z axes 12.7 m/min Rapid traverse rate on X axis 15.2 m/min Rapid traverse rate on Y axis 15.2 m/min Rapid traverse at Z 15.2 m/min Axis motors 30-station tool changer Max. tool diameter (full) 102 mm Max. tool diameter (adjacent positions empty) 254 mm Max. tool length 508 mm Max. tool weight 13.6 kg Tool-to-tool (average) 8.00 s Chip-to-chip (average) 12.60 s General information Coolant tank capacity 360 L Dimensions Domestic pallet 488 cm x 366 cm x 346 cm Export crate 488 cm x 366 cm x 348 cm Weight 13608.0 kg

Year of construction: 2018, condition: refurbished (used), functionality: fully functional, machine/vehicle number: E61SI18082688087, This is an SCC 61 WE BakingLine combi-steamer in an electric version, manufactured by the premium brand Rational, built in 2018. The unit has been completely overhauled and inspected in our in-house workshop. The combi-steamer is fully functional. The base shown in the picture is not included in the offer, but a suitable BakingLine base for 60x40 trays can be offered at an additional cost. You will receive an invoice with VAT shown. Service: We will gladly assist you in arranging a certified Rational customer service technician. Are you looking for a specific Rational device type? Ask us, we have access to a wide range of used and new equipment. We will gladly advise you on all device types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: 6 months warranty on all electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality brand-name equipment at fair prices. Professional overhaul/inspection & expert cleaning. Tested & fully functional. Flexible shipping or self-collection options. Competent advice - before and after purchase. Provision of operating manuals, connection diagrams & spare parts. Inspection according to DGUV V3. This combi-steamer offers space for 5 x 400x600mm trays. In automatic mode, the unit automatically recognizes the ideal cooking path, the size of the food, the quantity to be cooked, and the product-specific requirements for 7 applications (meat, fish, poultry, side dishes, egg dishes, baked goods, and finishing). Technical data: W x D x H: approx. 847 x 776 x 782 mm Minimum door opening dimensions for transport W x H: 845x850mm Power connection: V: 400 / kW: 11 / Hz: 50/60 Capacity: 5x 1/1GN Weight: approx. 110 kg Serial number: E61SI18082688087 Year of manufacture: 2018 Condition: used, completely overhauled, fully functional Further details: In combi-steamer mode, 3 operating modes are available: steam (30°C to 130°C), hot air (30°C to 300°C), and combination (30°C to 300°C). Care Control - self-cleaning Core temperature sensor Hand spray with automatic retraction 8.5 inch color display and touchscreen 5 fan speeds programmable Integrated, maintenance-free grease separation system Automatic start time preselection 7 cleaning levels for unattended cleaning - even overnight Moistening adjustable in 3 levels - from 30°C to 260°C 5 programmable proofing levels USB interface Seamless, tub-shaped hygienic cooking chamber, rounded corners Halogen cooking chamber lighting Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement. Gjdpfezc Hc Ajx Albsuc Subject to changes and errors. Do you have any questions, would you like to request a consultation, or would you like to view something on-site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: new, Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm LÖWER-DoubleSander Solid DSM 2004 ----- Double-sided four-belt single wood sander for Sanding solid wood such as window frames etc. Highly stable top design with innovative details. Suitable for high continuous loads even with higher chip removals. - sanding units arranged one after the other for pre-grinding, Fine sanding and finishing sanding, each from above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and shoe 3. Finishing unit with fiber brush - Directly driven grinding rollers for slip-free Power transmission - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the Grinding rollers - Airborne dust extraction on the tension rollers - Integrated brushing and finishing device with large Guodpfx Alevnv Tqsbjc Grinding dust extraction - motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball screws bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom via precision Threaded spindle with dimension display via scale ring (Resolution 0.1mm) - Sanding belt tension via pneumatic cylinder constant clamping pressure - Sanding belt change with pneumatic belt relaxation Within seconds - Adjustment option for the sanding belt run Band change - electro-pneumatic compressed air monitoring - Anti-running protection via contact roller if it is too thick workpieces - Workpiece transport via calibrated non-slip and non-stick fixed conveyor belts over heavy, cast tables Finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent Workpiece transport - Feed gear motor with stepless speed 4-20 m/min - all motors electrically protected - ergonomically arranged controls - digital thickness display (resolution 0.1mm) with modern Magnetic tape system Technical data: - Sanding belt speed 22 m/s - Sanding belt length 1800mm - Sanding belt width 200mm - Working width 190mm - Grinding thickness 2-180mm - four brake motors for 5.5 kW drive - Feed motor 1.5 kW - Feed speed 4-20 m/min. - automatic height adjustment 0.37 kW - two brush units with fiber brushes D 120 x 200mm at 0.37 kW - Suction nozzle 2 x 180mm 2 x 120mm - Extraction air speed 20 m/s - Pneumatic connection 6 bar - Working height 870mm - Length (with soft disc 2740mm) 2600mm - Length with control panel (with soft disc 3035mm) 2985mm - Width 880mm - Height 1910mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version ----- Price of the above machine on request! ----- Special accessories with additional charge: Workpiece blow-off - using nozzles from above and below at the machine outlet arranged, pneumatically controlled 4-belt sanding belt blowout via nozzles directly on the radii of the tension rollers inside the suction arranged, timer controlled on/off 5 seconds each, can be switched on separately Di...

Condition: ready for operation (used), Number of sanding units 2 st. sanding width 190 mm Sanding height max. 4-180 mm HESS - GLORIA 2 BELT SINGLE WOOD SANDING MACHINE ----- Manufacturer's description: ----- Compact design designed according to modern principles. Quiet and vibration-free operation thanks to rigid, stable machine housing and special insulation. Work safety device in accordance with the EC Machinery Directive with the "dust-tested" certificate. Offset grinding units with large-dimensioned tension rollers for good heat dissipation and stable sanding belt guidance. Sanding units with forced sanding belt oscillation. 2-point sanding dust extraction directly on the sanding roller. Airborne dust extraction on the large tension rollers. Integrated sanding belt blower for longer service life of the sanding belts. Integrated brushing and finishing device, adjustable via threaded spindle, with large dust extraction. Motorized grinding thickness adjustment of the entire upper unit via precision threaded spindles and linear ball sets on hardened and ground precision shafts with dust and dirt protection. Electronic digital display for workpiece thickness (resolution 0.1 mm). Contact roller and grinding shoe in a balanced ratio to the grinding belt grain load. Hardened and ground grinding rollers. Maintenance-free and wear-free oxide ceramic grinding shoes (DBGM) with excellent sliding properties, good heat dissipation and high dimensional accuracy. Grinding belt tension via pneumatic cylinder. Grinding belt change via pneumatically controlled belt relaxation. Ability to adjust the grinding belt run when changing the belt. Electro-pneumatic pressure monitoring of the compressed air supply with visual fault display. Automatic machine stop triggered when sanding belt breaks and by run-in protection with integrated wood thickness control. Optical display on the control panel. Feed device and proven, calibrated non-slip and non-adhesive transport belts on precisely ground tables and spring-loaded pressure rollers. Cardan shaft drive for even wood transport. Gujdpfx Asv D Rg Dslbec Feed speed continuously adjustable. Chip removal adjustment bottom via precision threaded spindle with dimension display via scale ring (resolution 0.1 mm) Ergonomic arrangement of the operating and setting elements on the machine front: sanding unit and brush device at the top, sanding unit and brush device at the bottom, workpiece transport device, sanding thickness setting, operating display, fault display. Control and operating unit with lockable main switch built into the machine housing. All motors electrically protected against overload. Technical data: ----- Grinding belt speed: 24 m/sec. Grinding width: 190 mm Grinding thickness: 4 - 180 mm Shortest workpiece length: 300 mm Feed speed: Continuously adjustable 5 - 25 m/min. Sanding belt dimensions: 200 mm wide 1600 mm long Electrical connection: 400 V, 3/N PE, 50 HZ Grinding units: 2 x 4 kW Feed: 0.75 kW Height adjustment: 0.18 kW Pneumatic connection: R 3/8", 80 NL, 8 bar Extraction air volume: 2 x 2000 - 2500 m3/h 20 - 25 m/sec. Extraction connection nozzle: 2 x 160 mm diameter at the top of the machine housing External dimensions: Length: 1600 mm Width: 1030 mm Height: 1820 mm Height with extraction nozzle: 1930 mm Working...

Condition: ready for operation (used), Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm Control ja weight 3300 kg Dimensions (L/W/H) 2600x920x1890 mm Dust suction hood 2x180, 2x120 mm Löwer DSM 2004 Double-Sided Sanding Machine ----- 4-Belt Sander + Disc Unit (Top/Bottom) Manufacturer's Description: ----- Double-sided, four-belt, single-wood sander for sanding solid wood such as window frames, etc. Highly stable, top-quality design with innovative details. Suitable for high continuous loads, even with high material removal rates. - Sequentially arranged grinding units for roughing, fine grinding, and finishing, each from above and below 1. Belt grinding unit with heavy steel roller 2. Belt grinding unit with rubberized roller and shoe 3. Finishing unit with fiber brush (see optional equipment below) Gujdpevu Hgbofx Albjc - Direct-drive grinding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated grinding shoes with very good thermal conductivity and absolute dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer belt life - Forced pneumatically controlled grinding belt oscillation - Effective grinding dust extraction directly at the grinding rollers - Airborne dust extraction at the tension rollers - Integrated brushing and finishing unit with large grinding dust extraction - Motorized grinding thickness adjustment via precision threaded spindles and large linear ball bearing sets on hardened and ground precision shafts with dust and Dirt protection - Chip removal adjustment at the bottom via precision threaded spindle with dimension display via scale ring (0.1 mm resolution) - Sanding belt tension via pneumatic cylinder with constant tension pressure - Sanding belt change with pneumatic belt release in seconds - Sanding belt tracking adjustment during belt change - Electropneumatic compressed air monitoring - Infeed protection via contact roller for workpieces that are too thick - Workpiece transport via calibrated, non-slip and adhesive conveyor belts over heavy-duty cast iron tables with a finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent workpiece transport - Geared feed motor with infinitely variable speed 4-20 m/min - All motors electrically protected - Ergonomically arranged operating elements - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: ----- - Sanding belt speed 22 m/s - Sanding belt length 1800 mm - Sanding belt width 200 mm - Working width 190 mm - Sanding thickness 2-180 mm - Four brake motors for drive 5.5 kW - Feed motor 1.5 kW - Feed speed 4-20 m/min - Automatic height adjustment 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm at 0.37 kW each - Extraction ports 2 x 180 mm, 2 x 120 mm - Extraction air velocity 20 m/s - Pneumatic connection 6 bar - Working height 870 mm - Length (with soft disc 2740 mm) 2600 mm - Length with control unit (with soft disc 3035 mm) 2985 mm - Width 880 mm - Height 1910 mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE compliant Equipped with the following special options: -----...

Condition: like new (used), Shimadzu Precision Balance UX4200H Electronic precision balance from the Shimadzu UniBloc series, featuring high resolution for laboratory, quality assurance, and industrial measurement applications. Power adapter included. Manufacturer: Shimadzu Model: UX4200H Series: UniBloc Balance Type: Electronic Precision Balance Maximum Capacity: 4200 g Readability: 0.01 g Minimum Load: 0.5 g Display: LCD Weighing Pan: Stainless steel Guodpezdah Ujfx Albjc Interface: Print function available Condition: Used

Condition: ready for operation (used), Year of construction: 2010, operating hours: 36,033 h, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: DMG ErgoLine, overall weight: 16,000 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 60, number of axes: 4, This 4-axis DECKEL MAHO DMC 80 H duoBLOCK was manufactured in 2010. It features a maximum spindle speed of 12,000 rpm and an impressive X, Y, and Z-axis travel of 800 mm each. The machine has a robust weight of 16,000 kg, ensuring stability during operation. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 80 H duoBLOCK horizontal machining centre we have for sale. Contact us for further details. Guodpfx Aloy Ryyrobjc • Power capacity: 103 kVA • Current (In max): 148 A • Voltage: 400 V • Frequency: 50 Hz • Control voltage: 24 V • Measuring system: Direct, absolute, photoelectric • Resolution (X, Y, Z): 0.001 mm • Position tolerance (X, Y, Z): 0.007 mm (Standard) / 0.006 mm (with Accuracy Package) • Position tolerance A-axis: 9 ws (Standard) / 8 ws (with Accuracy Package) • Position tolerance B-axis: 8 ws (Standard) / 6 ws (with Accuracy Package) • Position tolerance C-axis: 7 ws (Standard) / 5 ws (with Accuracy Package) • Table height (top of pallet to floor): 1120 mm • Distance spindle center to table: 150 mm (Motor spindle) / 145 mm (Gear spindle) Technical Specification Taper Size HSK 100

Condition: ready for operation (used), Year of construction: 2017, operating hours: 9,271 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 205 mm, travel distance Z-axis: 510 mm, spindle motor power: 15,000 W, overall weight: 2,750 kg, controller manufacturer: FANUC, controller model: i Series, number of slots in tool magazine: 12, number of axes: 3, Horizontal turning machine manufactured in 2017. This DOOSAN LYNX 2100MA features a maximum turning diameter of 300 mm and a turning length of 510 mm. It is equipped with a 12-station drum turret and driven tools, providing versatility in machining. If you are looking to get high-quality turning capabilities, consider the DOOSAN LYNX 2100MA machine we have for sale. Contact us for further details. • Maximum turning diameter: 300 mm • Maximum turning length: 510 mm • Swing over bed: 600 mm • Bar capacity through spindle: 51 mm • Spindle bore: 61 mm • Spindle nose: A2-5 • Rapid traverse X / Z: 30 / 36 m/min Gusdjzc Iy Nepfx Albec • C-axis resolution: 0.001° • Turret: 12-station drum turret with driven tools • Driven tool speed: 6,000 rpm • Driven tool motor power: 3.7 kW • Tool shank size: 20 × 20 mm • Boring bar shank diameter: 32 mm • Chuck size: 6" hydraulic chuck • Tailstock quill diameter: 65 mm • Tailstock quill taper: MT4 • Tailstock quill stroke: 80 mm • Total parts counter: 393,105 pcs (control counter) • Cutting time: 9,271 h Technical Specification Counter Spindle No Driven Tools Yes