Used Load Turning Device for sale (45,864)

Condition: used, L + Z Lathe WEILER Type LZ PRIMUS GS Machine no. No. 2461 Year of construction approx. 1990 Center width 400 mm Turning diameter over bed 250 mm Center height above bed 125 mm Turning diameter over support 140 mm Center height above support 70 mm Spindle bore 24 mm Spindle speed 60 - 3000 rpm 18 steps Feed lengthwise and flat Chuck flange short taper DIN 55022 size 4 Inner tailstock taper MK 2 Drive power 1.1 kW and 1.5 kW pole-changing Mains connection 380 Volt, 50 Hz - 3-axis digital readout FAGOR, type 30i-T-B - Spindle speed via 2 motor speeds and 9 gear stages - 3-jaw lathe chuck RÖHM Ø 125 mm with stepped jaws - MULTIFIX quick-change tool holder with 1 interchangeable cassette - Set of collets Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 / mm - 1 centering tip for collet chuck holder - Emergency stop - Hinged chuck guard - Splash guard - Machine light - electrical diagram - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Space requirement L x W x H 1200 x 900 x 1560 mm Weight 520 kg Bsdpfx Absrtd Uwozjww good condition

Year of construction: 2012, operating hours: 6,500 h, condition: ready for operation (used), Main Drive Number of axis 3 Bsdpfx Abexuaxmezoww Media Chip conveyor Yes Additional Equipment KITAGAWA Hollow Clamping Device with KITAGAWA SS1881K21 for the main spindle Coolant system with increased pressure (5 bar) Hinged belt conveyor, right-hand discharge Integrated parts catcher for the main spindle Interface for bar feed, LNS Double foot switch with protective cover Signal light (red, yellow, green) Tool overhang length 100 mm for driven Y-axis travel + Tool holder package Transformer 45000 VA 15 bar pump with filter This 3-axis DMG Mori Seiki NLX2500Y 700 was manufactured in 2012. It features a KITAGAWA Hollow Clamping Device, enhanced coolant system at 5 bar, and an integrated parts catcher. Additional attributes include a hinged belt conveyor, I/F for bar feed, and a signal light system. Ideal for turn-mill operations, consider the opportunity to buy this DMG Mori Seiki NLX2500Y 700 horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: excellent (used), Year of construction: 2005, It is a precision measuring device for simple and fast measurement of through-hole drills and blind drills of burrs and end mills. This device is indispensable as basic equipment for modern tool shops, sharpening shops and CNC machine operators. The equipment is used in the woodworking and metalworking industries, as well as in glass and stone processing. Everywhere where tool inspection is required. It allows checking the dimensions of the tool its radii or profile and the quality of the cutting surfaces. - measuring range: - Z axis 370 mm - X axis 115 mm Bjdpfeu Sbpcox Abzjww - Total weight: about 200 kg

Condition: reconditioned (used), Year of construction: 2019, CNC Lathe DMG MORI NLX 2500 Y/700 Equipped with DMG MORI M730 UM MAPPS CELOS CNC Control Year of manufacture: 2019 Turning diameter: 356 mm Travel in X axis: 260 mm Travel in Z axis: 795 mm Travel in Y axis: ±50 mm Spindle bore: 91 mm Main spindle speed range: 4,000 rpm Speed range of driven tools: 10,000 rpm Scope of supply: - Work area door with internal lighting - 12-position turret with 12 driven stations - C axis, Y axis - Touch probe (Marposs) Bsdpsw Suv Nofx Abzsww - NC tailstock with foot switch - Manual tool presetting device (HS) - Hydraulic 3-jaw chuck Kitagawa BB 254 with foot pedal (HS) - Various jaw sets for main spindle (HS) - 3 driven tools - Linear scale on X, Y, and Z axes - 4-color signal lamp - Chip conveyor - High-pressure coolant system with compact filtration unit, 70 bar / 700 l tank - Operating manuals

Condition: used, Year of construction: 2007, turning diameter 42 / 140 mm turning length 170 mm Bwodpfjvyli Ejx Abzjw control Mitsubishi Meldas turning speeds 80-8.000 U/min c-axis 0,001° turret (x-stations) 2x 12 (VDI 20) angetrieben turning speeds 45-4.500 U/min spindle 1 kW gripping station 42 mm turning speeds 60-6.000 U/min c-axis 0,001° number of controlled axis 8 collet unit 48 DIN 6343 . Number of working hours 10769 h chip conveyor ja/yes Bj. 2018 total power requirement 7,5 / 11 kW weight of the machine ca. 3,3 t dimensions of the machine ca. 2,4 x 1,6 x 2,2 m CNC turning and milling machine CITIZEN BOLEY BE 42, year 2007 Simultaneous working with 7 axes on main and pick-up spindle very good condition, operating hours 21.999h (September 2024) Accessories: # Various tool holders: 2x axial driven and numerous rigid tool holders 4x radiale driven tool holder # collet chuck for collets type 173E # additional coolant cooler # Knoll chip conveyor, year of construction 2018 The Boley BE 42 is without barloader. Loading magazine interface has been fitted.

Condition: used, Year of construction: 2002, functionality: fully functional, MORI SEIKI - SL 204 MC Offer Details Stock Number: 1039-9201 Type of Machine: CNC Turning and Milling Center Manufacturer: MORI SEIKI Model: SL 204 MC Year of Manufacture: 2002 Control System: MSG 805 MAPPS Location: D-59302 Oelde, Germany Country of Origin: Japan Delivery Time: by arrangement Freight Terms: ex site Additional Information CNC Turning and Milling Center MORI SEIKI - SL 204 MC WE OFFER YOU: - Workshop-tested machines - Free loading onto truck - NO auction fees - Delivery available (at extra cost) - Unloading and commissioning (at extra cost) Technical Details Turning diameter: 390 mm Turning length: 507 mm Control: MSG 805 MAPPS Maximum turning diameter: 390 mm Swing diameter over bed: 680 mm Swing diameter over cross slide: 510 mm Distance between centers: 618 mm Main Spindle: Speed range – main spindle: 45 – 4,500 rpm Drive power – main spindle: 11 / 7.5 kW Spindle bearing diameter: 110 mm Spindle bore: 73 mm Max. bar diameter: 51 mm Spindle nose: JIS A2-6 Chuck diameter: 210 mm C-axis: 0.001° Axis Travels: x-axis: 235 (195+40) mm z-axis: 520 mm Tool Turret: Number of tool stations: 12 positions Number of driven tool stations: 12 positions Speed range – driven tool stations: up to 3,000 rpm Drive power of driven tool stations: 5.9 / 4.5 kW Shank height for square tools: 25 mm Maximum drill shank diameter: 50 mm Turret indexing time: 0.2 sec Tailstock: Bsdpfsxt Ervsx Abzjww Tailstock travel: 490 mm Quill diameter: 85 mm Tailstock taper: MT 4 Quill stroke: 120 mm Feeds: Rapid traverse X: 18 m/min / Z: 24 m/min Feedrate range: 0 – 1,260 mm/min Total power requirement: 30.1 kW Approx. machine weight: 4.5 t Space requirements approx.: 5.0 x 2.5 x 2.5 m Accessories - Documentation - Chip conveyor - Coolant system - Tailstock - Hydraulic unit - 3-jaw chuck Kitagawa BB208 - Tool turret - Driven tool system - C-axis - Tool presetting - Parts catcher - 10x driven tools - Various tool holders - Set of 6 clamping jaws

Year of construction: 2025, condition: new, functionality: fully functional, lye device Lye Aqualung with salt container and caustic drain valve, 4-spring technology Stainless steel stand incl. Travel with storage and locking rollers suitable for sheet metal size 580 x 780 mm, 4 or 5 rows Bsdpfx Aedlp Rxjbzoww Dimensions in mm: 700 x 902 x 880 WxDxH

Year of construction: 2022, operating hours: 1,790 h, condition: ready for operation (used), Main Drive Spindle speed range 50 - 6000 Spindle motor power 11.5 kW Spindle bore 62 mm Number of axis 2 Additional Equipment Automation: Samsys short bar loader Extra Features: High-pressure pump & tank, high-pressure seal kit, workpiece removal arm, tool height correction in the Y-axis, coolant tank and pumps, detachable wired handwheel, tool monitoring, programmable face printing, and Hi-Cut Pro for driven tools Bjdpexuawcjfx Abzoww two BMT55 revolvers with 16 stations each This Okuma LT2000-2T1MY was manufactured in 2022. It features two 22KW spindles, a 32-station BMT55 turret, and an OSP-P300LA control system with OSP and ECO suites. It includes a Samsys short bar loader, high-pressure pump, and tank. The machine offers 4-axis machining capabilities with Y-axis in the upper turret and is equipped with a 15" color LCD TFT multi-touch screen. If you are looking to get high-quality turning capabilities consider the Okuma LT2000-2T1MY machine we have for sale. Contact us for more information. Application Types Turning

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: RF5060-5-2021, Year of construction: 2021, Bradman Lake SL80 Semi-Automatic End-Load Cartoner • Speed: up to 80 cartons per minute • Carton Size Range: A 50–254 mm | B 19–76 mm | C 140–304 mm • Feed: manual loading area for 2 operators • Glue System: Nordson ProBlue 4 hot-melt unit • Construction: stainless steel frame & panels, hygienic design, CE compliant Bjdexqmmpepfx Abzoww • Vacuum Pump: Busch • Features: SIKO digital readouts, inverter drive, castors for mobility

Condition: used, Year of construction: 2007, controller manufacturer: Siemens, controller model: 840D - Powerline, _____ Description: Year of manuf. : 2007 Control : Siemens 840D - Powerline Turning diam. : 640 mm Turning length : 1185 mm Mainspindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):28 kW Torque (max.):320 Nm C-Axis:0,001° Barcapacity:65 m Workpiececlamping:3-Jaw chuck, Hainbuch B-TOP 3 ø215 mm Subspindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):28 kW Torque (max.):320 Nm C-Axis:0,001° Workpiececlamping:3-Jaw chuck, Hainbuch B-TOP 3 ø215 mm Movement in Z:1.150 mm Rapid travers in Z:40 m/min Toolcarrier I (X/Y/Z/B): Technology:Millingspindle Speed:12.000 rpm Power (max.):22 kW Torque (max.):100 Nm Taper:HSK-A63 Bodpjxrw Uyjfx Abzeww Movement in X/Y/Z:550/180/1.185 mm Rapid traverse in X/Y/Z:40/24/70 m/min B-Axis:240° Toolcarrier II (X/Z): Technology:Turret with 12 stations Taper:VD40 Tooldrive:4.000 rpm, 11,7 kW, 28 Nm Movement in X/Z:180/1.050 mm Rapid traverse in X/Z:24/40 m/min In general: Technology:Shelfmagazin with Double-gripper Toolstations:80 Toollength (max.):200 mm Tool-ø (max.):80 mm Equipment/Accessory: Positionsensor:Direct Scales in all Axes Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with Paperbeltfilter, Temperature control and high-pressure, 80 bar Workpiecemeasurement:Touchprobe, Marposs WRP 45 Toolbreakagecontrol:Mechanical Rawmaterial feed:Barloader, Breuning-Irtco ILS-RBK 10016 Finishedpart removal:Pick-up device at Turret andParts conveyor belt Oilmistseperator:Electrostatic Extraction, LTA AC 3001 Toolholder:Misc. used static and driven toolholder Further Accessory:Chiller, Rinsing pistol

Condition: used, Year of construction: 2000, functionality: fully functional, The used BIGLIA B 501 YS CNC lathe with live tooling and sub-spindle is a fast, compact-medium size inclined bed CNC lathe, featuring an ASA 6" main spindle with "C" axis, FANUC 18i-T CNC controller with color LCD, year of manufacture 2000, compliant with CE standards. Bjdpfexf I I Rjx Abzjww It is equipped with a sub-spindle (also with "C" axis), 12-station electrically driven turret with Y axis, dual chuck, tool presetting, and bar feeder interface. ASA 6" spindle size Main spindle chuck diameter: 210mm Main spindle bar capacity: 52mm Sub-spindle bar capacity (ASA 5"): 52mm Sub-spindle chuck diameter: 160mm Main spindle max. power: 26 kW Spindle speed: 4,000 rpm (both spindles) Maximum distance between spindles: approx. 50,000mm Y-axis travel: 120mm (+/-60mm) Live tooling power: 3.7 kW Machine weight: 5,300 kg The scope of supply is completed by a set of fixed tool holders, a set of live tool holders (as shown in photos), and a belt-type chip conveyor.

Condition: excellent (used), Year of construction: 2011, CNC Turning-Milling Center MTCUT T20MC Year of manufacture: 2011 Driven tools available Accessories included Technical data: Working area • Max. swing diameter: Ø 470 mm (18.5”) • Max. machining diameter: Ø 280 mm (11.02”) • Max. machining length: 508 mm (20”) • Bed slide and inclination angle: 45° Bed • Max. longitudinal travel (Z-axis): 520 mm (20.47”) • Z-axis servo motor: 1.4 kW (1.8 HP) • Z-axis rapid traverse: 30 m/min (1181”/min) • Max. cross travel (X-axis): 176 mm (6.93”) • X-axis servo motor: 1.4 kW (1.8 HP) • X-axis rapid traverse: 30 m/min (1181”/min) Spindle Bsdpfxsxtnhas Abzjww • Main spindle bore / draw tube diameter: Ø 62 mm (Ø 2.44”) / Ø 52 mm (Ø 2.04”) • Spindle nose: ASA A2-6 • Taper angle of the bore in 8" spindle: 1/20 • AC main spindle motor: FANUC 7.5/11 kW (10 HP / 15 HP) • Speed (8" main spindle): Standard 4500 rpm Tool turret • Type: Hydraulic clamping device • Boring bar diameter / position: Ø 32 mm • Turning tool cross-section / position: □ 20 mm × 20 mm / □ 25 mm × 25 mm Tailstock • Quill diameter: Ø 75 mm (2.95”) • Stroke: 425 mm (16.73”) • Quill type: Fixed • Quill taper: MT No. 4 • Quill travel: 100 mm (3.94”)

Condition: used, Year of construction: 2005, turning diameter 275 mm turning length 900 mm control TRAUB TX8i spindle passage 65 mm power capacity at 100 % load 25,20 kW power capacity at 40 % load 30,20 KW max. torque at 40% / 100% load 180 / 135 Nm spindle turning speed - stepless 1 - 5.000 U/min spindle diameter in front bearing 110 mm C-axis 1 - 500 U/min worktool support No. 1 x-axis 290 mm y-axis 165 mm z-axis 600/950 mm B - axis 360 ° rapid traverse X/Y/Z 18 / 18 / 30 m/min feed capacity X/Y/Z 10 / 10 / 7 kN number of tools 2x2 + 2x2 number of driven tools 2x2 + 2x2 mm toolpiece turning speed range 8.000 / 2.000 U/min power capacity at 25 % load 5,80 kW max. torque at 25% load 4x18,6 / 4x74 Nm tool taper TRAUB Ø60 worktool support No.2 / No.3 / No.4 x-axis 170 mm z-axis 600/950 mm y-axis +/- 60 mm rapid traverse X/Y/Z 18 / 15 / 30 m/min feed capacity X/Y/Z 10 / 10 / 7 kN tool turret - number of stations 10 Bodpfsw E Nnbox Abzeww number of driven tools 10 mm toolpiece turning speed range 1 - 6.000 U/min power capacity at 25 % load 5,80 kW max. torque at 25% load 18,60 Nm tool taper DIN 69880 Ø40x63 bar loader DNH61 / 3000 Bar length 1.000 - 3.200 mm bar material dia. 18 - 63 mm hexagon max.45 mm total power requirement 95,00 kW weight of the machine ca. 16,00 t dimensions of the machine ca. 10,00 x 3,50 x H3,00 m With TRAUB TX 8i control unit, main and counter spindle with C-axis, 3 turrets, 1 vertical-tool-carrier with B-axis, dust exhauster, chip conveyor, coolant system with coalescence-separator. Barfeeder TRAUB Stamag DNH61 /3000 2 pc. 3-jaw chuck SMW KNCS-N 170-43 2 pc. HAINBUCH Spanntop chuck 40 pc. various tool holder non-driven 6 pc various tool holder driven Spare parts package Machine can be inspected under power.

Year of construction: 2022, condition: ready for operation (used), Control Unit Brand FANUC Model Oi-TF Main Drive Spindle speed range 5000 Movement X-Axis Movement 300 mm Z-Axis Movement 175 mm Tools Slots in storage 7 Bjdpfoxrhfiex Abzsww Additional Equipment LNS Bar Loader 3m This ERGOMAT TNG 32 was manufactured in 2022. It features a spindle with a bar capacity of Ø 32 mm and a maximum speed of 5000 rpm. The horizontal turning machine includes a Fanuc Oi-TF control and an LNS bar loader with a 3m capacity. Consider the opportunity to buy this ERGOMAT TNG 32 horizontal turning machine. Contact us for more information. Application Types Turning

Condition: excellent (used), functionality: fully functional, Quark balls or piped pastries: The ball portioner is designed for portioning small quantities of homogeneous masses and for filling patisserie products in small-scale production, all via manual operation. Robust construction, easy to clean. The dosing quantity is infinitely adjustable. All parts that come into contact with the filling material are made of stainless steel or food-grade plastic. Comes with a stainless steel stand. Used unit, cleaned. Bwodpowpz Afofx Abzjw Many more bakery machines are in stock!

Year of construction: 2020, operating hours: 2 h, condition: ready for operation (used), Control Unit Brand FANUC Model Series Oi-TF General Data Machine weight 20000 kg Main Drive Spindle speed range 1800 rpm Spindle motor power 30 / 37 kW Spindle bore 132 mm Tool taper MT5 (built-in) Number of axis 2 Movement X-Axis Movement 350 mm X-Axis Rapid Traverse 20 m/min Z-Axis Movement 3130 mm Z-Axis Rapid Traverse 10 m/min Bwedpfxsxqtf Se Abzow Workpiece Workpiece drm over bed 775 mm Workpiece drm over support 630 mm Turret Number of turrets 1 Tail Stock Pinol diameter 160 mm Tools Number of station 1 Additional Equipment Electric Power Supply Required: 59 / 220 kVA This SMEC SL 4500 L was manufactured in 2020. It features an 18" chuck, a maximum turning diameter of 690 mm, and a machining length of 3,055 mm. The spindle supports speeds up to 1,800 rpm with a motor power of 30/37 kW. It includes a 12 station turret and a tailstock with a MT5 taper. Consider the opportunity to buy this SMEC SL 4500 L horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Year of construction: 2021, condition: ready for operation (used), General Data Measurements width 1600 mm Measurements depth 3400 mm Measurements height 2100 mm Machine weight 5000 kg Control Unit Brand SIEMENS Model SINUMERIK 8287D Main Drive Spindle speed range 20 – 2200 Spindle motor power 15 kW Spindle bore 81 mm Number of axis 2 Movement X-Axis Movement 280 mm Z-Axis Movement 1435 mm Workpiece Workpiece drm over bed 500 mm Workpiece drm over support 260 mm Tail Stock Pinol diameter 75 mm Pinol tool taper MK 5 Bodpfjxqtgcox Abzoww This Wagner WDE 500 PLUS was manufactured in 2021. It features a max turning diameter over bed of 500 mm and a spindle speed range up to 2200 rpm. Equipped with Siemens 828 B-T control for enhanced precision and a spindle motor power of 15 kW. Ideal for robust turning operations. Machine dimensions are 3400 × 1600 × 2100 mm, weighing approximately 5000 kg. For more information about this machine, please reach out to us. Application Types Turning

Condition: ready for operation (used), Year of construction: 2012, operating hours: 38,984 h, Control Unit Brand SIEMENS Model DGM ERGOline Main Drive Number of axis 4 Bwjdpfx Ajxpywxsbzsw Media Chip conveyor Yes This DMG GILDEMEISTER CTV 250 Vertical lathe machine was manufactured in 2012 in Germany and has 38984 production hours. It is equipped with a SIEMENS control unit. The machine dispose of a chip conveyor and a high pressure cooling system with paper filter. The revolver head was completely renewed at the end of the previous year. Application Types Turning

Year of construction: 2019, operating hours: 3,934 h, condition: ready for operation (used), Control Unit Brand HAAS Model NGC Main Drive Spindle speed range 4000 Spindle motor power 14.9 kW14.9 kW Movement X-Axis Movement 213 mm Y-Axis Movement ±51 mm Z-Axis Movement 572 mm Media Chip conveyor Yes Additional Equipment ATP – Automatic tool probe Install Kit – Bar feeder installation kit with adapters for bar diameters 9–44 mm / Programmable, pneumatically operated finished part catcher (max. part dimensions: 108 mm x 54 mm, max. weight: 2.27 kg) CONVEYOR – Chip conveyor (belt type) LINER ADAPTER 2.00 – Haas liner adapter for spindle with bar diameter 2" (51 mm) HAAS Bar Feeder – Compatible with HAAS lathes (ST-10 to ST-35), for automatic bar feeding LT-6K-UP – Option to increase the speed of driven tools up to 6000 rpm PCAT – Pneumatic part catcher, programmable, for parts up to 96 mm x 152 mm Bwjdpsxqiarofx Abzow PTS – Hydraulic tailstock This 3-axis HAAS ST-20Y was manufactured in 2019. A robust horizontal turning machine, it offers reliable performance for precision machining. Consider the opportunity to buy this HAAS ST-20Y horizontal turning machine. Contact us for more information. Application Types Turning

Year of construction: 2012, operating hours: 18,168 h, condition: ready for operation (used), Control Unit Model ITplus Brand HEIDENHAIN Main Drive Number of spindles 2 Spindle speed range 5500 Tool taper VDI30 Number of axis 6 Bwjdpexpkp Sjfx Abzsw Turret Number of tool slots 12 Rotating tools Yes This 6-axis DMG MORI CTX ALPHA 500 V6 was manufactured in 2012. It features a Heidenhain ITplus control, a 12-holder turret with driven tools, and both C and Y axes for enhanced versatility. Main spindle speed reaches up to 5500 rpm, and the counter spindle up to 6000 rpm. VDI30 tooling interface enhances its capability. A great opportunity to buy this DMG MORI CTX ALPHA 500 V6 horizontal turning machine. Reach out for further details regarding this horizontal turning machine. Application Types Turning

Year of construction: 2014, operating hours: 5,316 h, condition: ready for operation (used), Main Drive Spindle speed range 4000 Spindle bore 52 mm Number of axis 3 Movement X-Axis Movement 213 mm Y-Axis Movement ±51 mm Bwsdpfx Aoxn Uzpebzjw Z-Axis Movement 572 mm Turret Tool taper VDI/BOT Tools Number of station 12 This 3-axis HAAS ST-20Y was manufactured in 2014. It features a CNC lathe with C and Y-axis capabilities, a spindle speed of 4000 rpm, and a chuck size of 8 inches. Additional features include a 12-station turret, chip conveyor, and a programmable hydraulic tailstock. Ideal for precision turning operations. If you are looking to get high-quality turning capabilities consider the HAAS ST-20Y machine we have for sale. Contact us for more information about this machine. Application Types Turning

Year of construction: 2004, operating hours: 25,218 h, condition: ready for operation (used), Control Unit Brand HEIDENHAIN Model CNC Pilot 4290 Bodpsxr R A Dsfx Abzsww Main Drive Number of axis 3 Additional Equipment Chip conveyor included Forkardt lathe chuck Ø400 with several sets of jaws (approx. 100 sets) This 3-axis Gildemeister CTX 520 linear was manufactured in 2004. It's a horizontal turning machine designed for precision and efficiency in metalworking. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX 520 linear machine we have for sale. Contact us for more information. Application Types Turning

Year of construction: 2003, operating hours: 4,894 h, condition: ready for operation (used), General Data Measurements width 2500 mm Measurements depth 4000 mm Measurements height 2500 mm Machine weight 6000 kg Control Unit Brand SIEMENS Model Sumerik 810 D Main Drive Spindle bore 65 mm Number of axis 3 Movement X-Axis Movement 210 mm X-Axis Feed Force 5000–7000 Nm X-Axis Rapid Traverse 24 m/min Y-Axis Movement ± 40 mm Z-Axis Movement 610 mm Z-Axis Feed Force 5000–7000 Nm Z-Axis Rapid Traverse 24 m/min Turret Number of turrets 1 Rotating tools Yes Tool taper VDI 30 Tools Number of station 12 Bjdpsxr Rw Isfx Abzeww Additional Equipment Oil cooler Parts catcher This 3-axis EMCO turn 365 tcmy was manufactured in 2003, featuring a 12-station tool turret, VDI 30 tool holder, and driven tools with a speed range up to 4,000 rpm. It includes a power chuck, live centre, collet chuck device, and additional tool holders. Ideal for precision turning, this machine offers robust capabilities with a spindle size of 65 mm and a travel distance on the Z-axis of 610 mm. Contact us for more information about this machine. Application Types Turning

Year of construction: 2011, condition: ready for operation (used), This SPINNER SERVO-LOAD 80-1200 was manufactured in 2011. It features a bar feeder with a maximum rod length of 1,200 mm and a rod diameter range of 6 - 80 mm. Consider the opportunity to buy this SPINNER SERVO-LOAD 80-1200. Contact us for more information. Bodpfxexqh Ubs Abzoww Application Types Other Machine Tools

Year of construction: 2005, condition: ready for operation (used), Control Unit Brand SIEMENS Model 802D This Dugard Eagle FCL-200HT was manufactured in 2005. A robust horizontal turning machine featuring a spindle speed of 3,500 RPM, it handles a process diameter of up to 280mm and a center distance of 508mm. Weighing 3,850 kg, it's designed for durability and precision. If you are looking to get high-quality turning capabilities, consider the Dugard Eagle FCL-200HT machine we have for sale. Contact us for more information. Application Types Bodpfxjxua Are Abzeww Turning