Used Manual Arbor Press for sale (24,721)

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: W41173J06378, Year of construction: 2018, operating hours: 3,372 h, load capacity: 1,400 kg, lifting height: 4,144 mm, free lift: 150 mm, mast type: duplex, construction height: 2,640 mm, DGUV certified until: 02/2027, Equipment: UVV, S+UVV 02/2027 1,400kg LI-ION Lithium Scale 414cm High-Lift Pallet Truck Pallet Truck Ameise Battery 02/2023 No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,400 kg Lift height: 4,144 mm Fork length: 1,200 mm Free lift: 150 mm Design: High-lift pallet truck MACHINE DETAILS Operating hours: 3,372 Mast type: Duplex Drive type: Electric Battery: 26/03/2023, 23.1V, 205Ah, measured at 23.09V (very good performance!) Dimensions & Weight Dimensions (L x W x H): 2,100 x 800 x 2,640 mm Weight: 1,500 kg EQUIPMENT Former Linde full-service machine Integrated scale All dimensions are rounded values. No liability for typing or measurement errors. COLLECTION CONDITIONS Side loading up to 5 t possible with large forklift on site, at your own risk. Ijdpfx Aboyuu Hyscjhw Collection ONLY with e-mail payment confirmation! Collection WITHOUT appointment Monday to Friday 7:00 am - 4:30 pm. Mast can be dismantled for transport upon request if too high. In case of late collection, a storage fee of €20 per machine per day applies (the additional payment must be made before collection).

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: P21173Y05406, Year of construction: 2021, operating hours: 3,356 h, load capacity: 1,400 kg, lifting height: 2,324 mm, free lift: 150 mm, mast type: duplex, construction height: 2,100 mm, DGUV certified until: 03/2027, Equipment: UVV, Service + Safety Inspection (UVV) until 03/2027, 1,400 kg Scale Pallet Stacker / High-Lift Pallet Truck / Electric Pedestrian Stacker No Reserve Price – Guaranteed Sale to the Highest Bidder! TECHNICAL DETAILS Load capacity: 1,400 kg Lift height: 2,324 mm Fork length: 1,200 mm Free lift: 150 mm Design: High-lift pallet truck / stacker MACHINE DETAILS Operating hours: 3,356 h Mast type: Duplex Drive type: Electric Battery: 24V, measured at 25.1V (excellent performance!) Ihjdpfxsyuu Azs Abcjw Dimensions & Weight Dimensions (L x W x H): 2,100 x 800 x 2,100 mm Weight: 1,300 kg FEATURES Former Linde full-service unit Initial lift Capable of lifting 2 pallets simultaneously Good ground clearance for rough or uneven floors Integrated scale All measurements are approximate. No liability for typing or measurement errors. COLLECTION CONDITIONS Side loading up to 5 t possible with large forklift truck available on site, at buyer’s own risk. Collection ONLY with e-mail payment confirmation! Collection WITHOUT appointment Monday to Friday 7:00 am - 4:30 pm. A mast that is too high for transport can be dismantled on request. If collection is not made within the agreed period, a storage fee of €20 per machine per day will apply (payable before collection).

Condition: ready for operation (used), Year of construction: 1986, functionality: limited functionality, machine/vehicle number: 97862034, installation height: 255 mm, sheet thickness (max.): 5 mm, working width: 180 mm, pressing force: 100 t, stroke length: 50 mm, TECHNICAL DETAILS Press force: 100 t Total force: 1,000 kN Ring tooth force: 40 - 310 kN Counterholder force: 10 - 270 kN Max. material width: 180 mm Max. material thickness: 5 mm Stroke rate (min.): 20 rpm Stroke rate (max.): 80 rpm Stroke: 50 mm Feed unit Max. strip thickness: 5 mm Max. strip width: 180 mm Max. feed length per ram stroke: 999.9 mm Tensile force per feed (starting force): 6 kN Clamping force: max. 19 kN Max. feed height adjustment: +40 mm Max. distance between feed rollers: 20 mm Resolution, related to rollers: 0.1 mm MACHINE DETAILS Input voltage: 400 V Input frequency: 50 Hz Connected load: 13.5 kW Pump power: 3 kW Ihjdpfeytcd Rsx Abcsw Motor power: 3 kW Air connection: 6 bar Height adjustment type: hydraulic Dimensions & weight Dimensions (H x W x D): 2,420 x 2,325 x 1,665 mm Installation height: 255 mm Weight: approx. 6 t Year of last overhaul: 1997 EQUIPMENT Decoiler unit Two sets of tools Note: Further technical data for the machine can be found in the attached operating manual. The seller has repeatedly experienced issues with the processing and blow-off cycle. As a result, parts were not cleared out and the machine was stopped for safety reasons. However, the seller assumes this is merely a matter of adjustment. The seller recommends an overhaul of the control system in the long term.

Condition: ready for operation (used), functionality: fully functional, We are currently offering for sale an 8-inch aluminum extrusion press machine. The equipment is well-maintained and in good operating condition. Isdpfxsyl Ui Ns Abcshw

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 721359, color channels: CMYK, paper weight (min.): 50 g/m², paper weight (max.): 400 g/m², paper width (max.): 36 mm, paper height (max.): 52 mm, Heidelberg Printmaster GTO 52-4 Offset Printing Machine (2006) For sale: Heidelberg Printmaster GTO 52-4, a reliable and high-quality 4-color offset printing machine manufactured in Germany. Model: GTO 52-4 Year: 2006 Serial Number: 721359 Configuration: 4-color (CMYK) Location: Azerbaijan Condition: Machine is in excellent working condition. Fully operational and well maintained. All new photos and videos are available. The machine is ready for inspection and testing at any time. Technical Specifications: Format: B3 (max sheet size 360 × 520 mm) Max print area: approx. 340 × 505 mm Speed: up to 8,000 sheets per hour Paper thickness range: approx. 0.03 – 0.4 mm Equipment and Features: Alcolor dampening system Manual plate clamping system Heidelberg inking unit with oscillating rollers Stream feeder with double-sheet control High pile delivery Powder spray unit Mechanical control system (simple, reliable, low maintenance) ink remote control Classic Center, single sheet feeder Iedpfx Ajyvdbpobcohw photoelectron. double sheet control, DDS film dampenings cooling unit Technotrans Alpha, quick plate clamping bars dry sprayer, + version Applications: Suitable for a wide range of commercial printing jobs including brochures, flyers, catalogs, business cards and other promotional materials.

Condition: like new (used), Year of construction: 2017, functionality: fully functional, Training school display unit VERY VERY seldom use For demo only, like new 1) Amada TP45FX 2) PATEC 110ton press with recoiler Isdpfx Aboyunphscehw

Condition: like new (used), Year of construction: 1985, operating hours: 200 h, functionality: limited functionality, machine/vehicle number: 38754, pressing force: 250 t, This plate bending machine was installed new in 1989 and was used for 200 Hrs and never used ever since. The mechanical parts are fully functional and are in perfect condition but the electrical board needs fixing. Force: 250 mp (metric tons) Working Surface Length: 5600 mm Working Surface Width: 400 mm Isdjykl Iaepfx Abcshw Working Surface Height: 100 mm Weight: Approximately 37,000 kg Press Sizes (LxHxW): 5700 x 3150 x 5200 mm

Condition: as good as new (ex-display), Year of construction: 2025, Tool testing press 150to installation height 1000mm stroke 600mm ram plate 1500mm x 1000mm Isdpfx Abjkw Rbaocshw table surface 1500mm x 1000mm Front light curtain Siemem control Weight 12,5to

Condition: new, Year of construction: 2025, functionality: fully functional, workpiece weight (max.): 170 kg, grinding spindle speed: 45,000 rpm, spindle speed (min.): 5,000 rpm, spindle speed (max.): 45,000 rpm, clamping diameter: 140 mm, clamping length: 2,000 mm, warranty duration: 12 months, Workpiece Clamping Diameter : ø 3 – 140 mm (Optional: ø 210 mm) Workpiece Diameter : ø 3 – 310 mm Workpiece Length : 50 – 2.000 mm Centre Hole Diameter : ø 1 – 60 mm (Optional ø 100 mm) Workpiece Weight : max. 170 kg (Optional 1,000 kg) Center Hole Angle : 60 ° Accuracy : < 1 µm (Submicron accuracy) Spindle Speed : 5.000 – 45.000 rpm Grinding Cone Movements : 3+1 Rotation Orbital rotation Stroke movement +1 Workpeice rotation Quirlig Grinding Technique : Included (Cross-hatched grinding pattern) Semi-Auto Grinding Cone Dressing : Included Workpiece Rotation : Available (as a option) Dust Extraction And Filtration : Available (as a option) Grinding Process : Manual Ijdpfxoxrnche Abcshw Sectors: : Precision Grinding, Aviation, Automotive, Machinery etc. Benefits: Sub-micron Precision: Achieve sub-micron (< 1 µm) precision in grinding thanks to Swiss engineering and a robust machine design. Sustainable Reliability: Ensure reliable and sustainable processing. Cost Efficiency & High Productivity: Benefit from lower production costs and high productivity due to a short grinding process and reduced production times for subsequent processes (cylindrical grinding). Quirlig Grinding Technique: Experience an optimized grinding process with the Quirlig Grinding Technique. Properly ground center holes that have cross-hatched grinding pattern. The cross-hatched grinding pattern ensures that oil is retained when the workpiece is placed between the centers during the cylindrical grinding process, creating a micro oil layer. The micro oil layer prevents unwanted "dry running" during cylindrical grinding. Low Maintenance Costs: Enjoy low maintenance costs throughout the machine's service life, thanks to Swiss-quality construction. The Zentroflex M-series center hole grinding machines are designed to deliver high-precision cylindrical grinding in the aviation, automotive, and machinery sectors. Additionally, the Zentroflex M-series is the ideal solution for recovering parts distorted after heat treatment or for reducing cylindrical grinding costs. Contact us for more details.

Condition: as good as new (ex-display), Year of construction: 2025, Hydraulic SPS press 100to (1.000KN) pressing force Siemens SPS1200 series Screen 10" Beijer stroke 400mm table top 790mm x 600mm Speed forward 110mm Speed return 140mm Light curtain Sick Remote maintenance module built in Rexroth hydraulics with cooler Available from week 46 fairground Stuttgart Modifications can be realized after request if necessary Ijdpenp Ndhjfx Abcjhw

Condition: new, Year of construction: 2025, Delivery ex works Turkey Bending length (A): 3050 mm Press force: 170 tons Sheet thickness 42kgf / mm: 8 mm Sheet thickness 72kgf / mm: 4 mm Upper tool: 1260 Top Tool 85 ° Lower tool: 50, 35, 22, 16 Distance between columns (B): 2550 mm Forward speed: 130 mm / s Working speed: 8 mm / s Retraction speed: 120 mm / s Crowning: manual (CNC-motorized available for an extra charge) X-axis travel: 750 mm X-axis speed: 250 mm / s Backgauge fingers: 2 pieces Front support arms: 2 pieces Oil tank capacity: 180 liters Main motor power: 11 kW Stroke length (C): 265 mm Installation height (D): 450 mm Projection stand (E): 410 mm Table height (F): 870 mm Table width (G): 170 mm Length (L): 4200 mm Height (H): 2800 mm Width (W): 2200 mm Weight: approx. 7500 kg Cybelec Cybtouch 12 2D Graphic CNC control 3 axes (Y1, Y2, X) expandable with optional R+Z-Axis Eurostamp 2067 lower tool (V: 50, 35, 22, 16) Eurostamp 1260 upper tool 85 ° Ihjdegu N Alopfx Abcow Narrow table All-steel welded construction Promecam quick clamping system CNC-controlled motorized backgauge (X: 750 mm) Adjustable backgauge fingers Inch and metric system can be selected Ground and chrome-plated cylinders Swiveling control panel Foot control with anti-panic stop & emergency shutdown Lateral protective grille (secured with limit switch) Light curtain on the back of the machine (900 mm) DSP laser finger protection system at the front (CE) BOSCH / REXROTH or HOERBIGER / HAWE hydraulic system BOSCH / REXROTH or ECKERLE hydraulic pump Slidable front support arms (2 pieces) Electronics unit from: SIEMENS, SCHNEIDER, DELTA, ABB, OMRON 380 V 50 Hz Painting: RAL 7035, RAL 5015 Optional special accessories available at an additional cost: -CNC-controlled R-axis (250 mm) -CNC motorized crowning -Servo driven motors backgauge system for X + R axis (Mitsubishi) -Painting in special colors on customer request Documentation in German or English CE conformity

Condition: new, Year of construction: 2025, Delivery ex works Turkey Bending length (A): 2550 mm Press force: 135 tons Sheet thickness 42kgf / mm: 8 mm Sheet thickness 72kgf / mm: 4 mm Upper tool: 1260 Top Tool 85 ° Lower tool: 50, 35, 22, 16 Distance between columns (B): 2100 mm Forward speed: 120 mm / s Working speed: 8 mm / s Retraction speed: 120 mm / s Crowning: manual (CNC-motorized available for an extra charge) X-axis travel: 750 mm X-axis speed: 250 mm / s Backgauge fingers: 2 pieces Front support arms: 2 pieces Oil tank capacity: 150 liters Main motor power: 7.5 kW Stroke length (C): 265 mm Installation height (D): 450 mm Projection stand (E): 410 mm Table height (F): 850 mm Table width (G): 110 mm Length (L): 2950 mm Height (H): 2200 mm Width (W): 1500 mm Weight: approx. 6000 kg Cybelec Cybtouch 12 2D Graphic CNC control 3 axes (Y1, Y2, X) expandable with optional R+Z-Axis Eurostamp 2067 lower tool (V: 50, 35, 22, 16) Eurostamp 1260 upper tool 85 ° Narrow table All-steel welded construction Promecam quick clamping system CNC-controlled motorized backgauge (X: 750 mm) Adjustable backgauge fingers Inch and metric system can be selected Ground and chrome-plated cylinders Swiveling control panel Foot control with anti-panic stop & emergency shutdown Lateral protective grille (secured with limit switch) Light curtain on the back of the machine (900 mm) DSP laser finger protection system at the front (CE) BOSCH / REXROTH or HOERBIGER / HAWE hydraulic system BOSCH / REXROTH or ECKERLE hydraulic pump Slidable front support arms (2 pieces) Electronics unit from: SIEMENS, SCHNEIDER, DELTA, ABB, OMRON 380 V 50 Hz Painting: RAL 7035, RAL 5015 Ihjdjgu Nzrepfx Abcjw Optional special accessories available at an additional cost: -CNC-controlled R-axis (250 mm) -CNC motorized crowning -Servo driven motors backgauge system for X + R axis (Mitsubishi) -Painting in special colors on customer request Documentation in German or English CE conformity

Condition: used, functionality: fully functional, Knuckle joint / coining presses CINCINNATI HME Iodpfx Abeypathscshw K-360 tons (3 units) K-600 tons (1 unit) Cincinnati HME K360 360 Tons capacity Stroke 2.125" Speed 90-200 SPM Main Motor 22 kW Maximum Coin Diameter 34 mm Maximum Coin Thickness 3.5 mm Cincinnati HME K600 600 Ton Capacity, 4.5'' Stroke, 25 Strokes per min, 17.5'' Shut Height (SDAU), 9/16'' Top Tool Adjustment

Condition: used, Year of construction: 2009, operating hours: 10,000 h, functionality: fully functional, feed length X-axis: 4,500 mm, total width: 1,300 mm, Reconditioned Sonar brand generator, 60 kW. Pressing size: 4500 mm x 1500 mm (4.50 x 1.30 m). Equipped with an automatic gluing unit that applies glue independently. Iodpjyvhl Tofx Abcshw

Condition: good (used), Nagel Citoborma 111 Paper Drill This machine is 100% functional and in very good condition. The drill table is adjustable in all directions (sides, front/back). It has stops for setting the drilling spacing. Sturdy construction – weighs 35 kg. This is one of the newest Citoborma drill models, currently in production. 230V power supply Iedpfx Aboyur E Hocehw Drill bit diameter: 2-9 mm Stack height: 50 mm Includes drill bits, a new cutting stick, and instructions. Made in Germany.

Condition: good (used), Oropress Hot Stamping Press This machine is in very good condition and ready to use. This machine is from the popular Oropress hot stamping machine manufacturer, manufactured in Germany. Description The Oropress hot stamping press is a hot stamping and embossing press for paper and plastics. It’s a useful device in any advertising agency or digital printing house. The manual press is powered by only 230V. A powerful press with adjustable pressure ensures repeatability and very high pressure between the die and the material. The machine features a worktop with a sliding function, adjustable embossing depth, and a hot plate with a thermostat. Specifications: Heating temperature adjustment Hot plate pressure mechanism: mechanical Press force: 1000 kg Power consumption: 500 W Power supply: 230 V Machine weight: 100 kg Plate size: 130 x 100 mm. Iodpfx Abjyur Egecshw

Condition: excellent (used), Fork length: approx. 115 cm, duplex mast, max. lift height: approx. 320 cm, max. load capacity: approx. 1000 kg, weight without battery: approx. 1040 kg, year of manufacture: 2018, known defects: forks do not lift and battery is discharged. BT SPE 200 DN high-lift pallet truck. Ijdpfx Aeyu Tfbjbcjhw

Condition: excellent (used), Fork length: approx. 115 cm, duplex mast, max. lifting height: approx. 320 cm, max. load capacity: approx. 1000 kg, weight without battery: 955 kg, year of manufacture: 2017. High-lift stacker BT SPE 200 DN Ihjdpeyu Td Dsfx Abcjw

Condition: new, Year of construction: 2020, Jungheinrich EMC 110 Warehouse Truck (2020) – Electric Pallet Truck 1000 kg We offer a Jungheinrich EMC 110 electric warehouse truck – a compact and efficient pallet truck ideal for operations in warehouses, production halls, logistics centers, and retail stores. This unit from the renowned Jungheinrich AG brand, manufactured in 2020, ensures smooth handling of standard-sized pallets with low operating costs. Ihjdoyu Tdqepfx Abcow 📌 Technical Specifications Manufacturer: Jungheinrich AG, 22039 Hamburg, Germany Model / Type: EMC 110 Serial number: 90614162 Year of manufacture: 2020 Rated capacity: 1000 kg Load center distance: 600 mm Battery voltage: 24 V Drive power: 0.5 kW Truck weight without battery: 396 kg Permissible battery weight: 60–66 kg 🛠️ Features The Jungheinrich EMC 110 is a lightweight, electric pallet truck that offers: ✔ Efficient 24 V electric drive – quiet and emission-free operation indoors, ✔ Easy control and maneuverability, even in narrow aisles, ✔ High degree of load handling control and safety during transport, ✔ Robust, compact design suitable for intensive warehouse usage. This machine is perfectly suited for daily pallet operations – loading/unloading, internal transport, and order picking. ⚙️ Application The EMC 110 truck is designed for: pallet transport in warehouses and halls, loading and unloading operations, short-distance goods movement, indoor activities requiring low noise and zero emissions. 📍 Key Advantages ✔ 1000 kg lifting capacity – suitable for most standard pallets ✔ Comfortable handling – intuitive controls and smooth maneuvering ✔ Low unladen weight facilitates operation and handling ✔ Jungheinrich brand – proven quality and durability 🎯 Who is it for? This model is recommended especially for: warehouses and logistics centers, manufacturing companies, stores with their own warehouse facilities, service providers and businesses with moderate pallet handling needs.

Condition: excellent (used), Electric Pallet Truck with Platform Jungheinrich ERE 20 – 2,000 kg We offer the Jungheinrich ERE 20 electric pallet truck with operator platform – an efficient and ergonomic solution for transporting heavier palletized loads in warehouses, production halls, and logistics centers. The ERE 20 combines the functionality of an electric pallet truck with enhanced operator comfort thanks to the integrated standing platform, which boosts productivity during long internal transport routes. Technical Data Manufacturer: Jungheinrich AG Model: ERE 20 Type: Electric pallet truck with platform Rated capacity: 2,000 kg Power supply: Traction battery Drive: Electric Operator platform: Yes Ihjdpfx Ajyu Tcgjbcsw Control: Steering wheel / ergonomic control panel Operation type: Indoor pallet transport Description based on data and photographs available in the product listing. Features The Jungheinrich ERE 20 pallet truck is equipped with an operator platform, significantly improving comfort and efficiency when transporting loads up to 2,000 kg. This solution is particularly beneficial in large warehouses or facilities where the operator performs multiple driving and lifting cycles over longer distances. The electric drive ensures smooth, quiet, and emission-free operation indoors, while the convenient platform allows for rapid change of direction and easy maneuvering in confined spaces. Application The ERE 20 model is widely used in: - Warehouses and distribution centers - Production halls - Internal pallet transport - Loading and unloading operations - Order picking Model Advantages ✔ High load capacity – 2,000 kg ✔ Operator platform – increased comfort and efficiency ✔ Electric drive – quiet, emission-free operation ✔ Ergonomic controls ✔ Stable, robust construction by leading brand Jungheinrich Why choose this model? The Jungheinrich ERE 20 pallet truck delivers high transport efficiency with exceptional operator comfort. The electric drive system and ergonomic operator platform make work more effective, especially for intensive operations and longer transport distances.

Condition: excellent (used), functionality: fully functional, Fork length: approx. 115 cm, max. load capacity: approx. 1000 kg, weight without battery: approx. 955 kg, year of manufacture: 2017, known fault: discharged battery and worn drive wheel. BT SPE 200 DN high-lift pallet truck. Ihsdpfx Abeyu Tbpjcsw

Condition: new, Year of construction: 2025, Sliding clip formers are used to produce fixation sliding clips for double standing seam roofing panels. Before installation roofing panels have to be made using roll former roofing machines. After finishing of panels production and preparing roofing works panels can be installed on roofing place with special fixation clips. Those clips, depending on design, could be fixed or sliding ones. Fixed clip has simple and cheap design so it can be good for small roofs that doesn’t have long length panels. Sliding clip are good for big roofs with different designs and long-length panels. Sliding clips can move and self-find perfect position so not be damaged and safe for roof while temperature expansions. We offer punching presses for making both fixed and sliding clips. We make sliding clip formers for 25, 27 or 39mm clip highs For sliding expansion clips productions there have three presses to be used. First sliding clip bottom part press is used for punching bottom part of sliding clip with fixation round holes and connection oval hole. At the same time this press cuts metal strip with necessary length. Blank for clip production is easy to get using manual guillotine or cut-to-length slitting machine. Second sliding clip bottom part bender is used for bending of sliding clip bottom part to 90 degrees angle. So, after this operation bottom part is ready. Third clip former makes top part of sliding clip at the same time forming and bending it. After producing bottom and top part of sliding clip you can easily connect it to one working sliding clip. Ihedpfxsqxalxj Abcow So using sliding clip formers that we offer you can easily make expansion clip and use it while double standing seam roofing installation without any unnecessary deformations. Maximum metal thickness you can work with -1mm. To get more information about sliding clip former we produce please contact our sales department.

Condition: new, Year of construction: 2025, Manual bending machine MB-3150 The principal difference that makes our manual bending machine much more functional than other company’s bending machines it’s the removable upper bar. So it lets you the opportunity to replace the slim upper bar to a bar with another configuration (segmented bar or bar for producing of the corrugated sheets). It’s help you to save money for buying additional machines and save the working place. Our manual bending machine has strong rigid construction so it lets you to bend metal sheets without any unwanted deformations. You can purchase manual bending machine MB-3150 mm in a standard set (manual bending machine, roller shear, back table, alidade, angle limiter, side handles). Or you can get additional equipment for the manual bending machine MB-3150 mm: pedals, segmented bar, bar for producing of the corrugated board, absorber, front limiters) There are fourth types of the manual bending machines MB we make: Manual bending machine 1400x1.2mm Manual bending machine 2150x1mm Manual bending machine 2650x0.8mm Manual bending machine 3150x0.7mm This manual bending machine bends metal sheets with maximum thickness 0.7mm Isdpov T Uvzsfx Abcehw Our enterprise has started to produce this kind of the manual bending machines since 2003 so we have great experience in doing our job and can propose the great solution to your business. To get information about the price of this bending machine and the way it could be delivered to your location just contact us. We will give you all the information you need. Specifications Maximum material width (mm) 3150 Maximum material thickness (mm) 0.7

Condition: excellent (used), CATALOG NUMBER 7926 TECHNICAL DATA - Working length: 6200 mm - Working width: 150 mm - Working height: 1350 mm - 12 vertical hydraulic cylinders - Dimensions (L/W/H): 6580/1270/2350 mm - Weight: approx. 4000 kg ADVANTAGES – very good condition – used press Ihodpfeyu Tp Tjx Abcew – original paint (not repainted) – intended for professional use Net price: 69,900 PLN Net price: 16,650 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in the event of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Self-loading press for laminated wood Steton P111 3000×1300 Working length: 3000 mm Working width: 1300 mm Automatic material loading Shelves heated by oil Diameter of vertical pistons: 70 mm Diameter of horizontal pistons: 50 mm Year of manufacture: 2006 Iodpfsyuah Aox Abcohw Total power: 24.5 kW CE certificate