Used Material Feed for sale (24,225)

Condition: used, fuel type: diesel, color: green, Year of construction: 2015, operating hours: 11,445 h, Year of manufacture: 2015 Model year: 2015 Empty weight: 32.000 kg General condition: average Technical condition: good Visual appearance: average Price: On request Please contact Ferdinand Pater for more information Stock no. D15 Machine Brand Sennebogen Type: 830M D-series Weight: 34 Ton Serial number: 830.0.2170 Building year: 2015 Nkjdot Dlwyspfx Ah Rjw Worked hours: 11.445 Engine: Cummins QSB 6.7 Boom: K15 configuration, Safety check valves on boom and stick cylinders Cabin: "Maxcab, Hydraulic Cab Riser, 2,7 m. in height Gantry catwalk on cabin " Upper carriage: Standard Sennebogen color, Central greasing system Lights: Several (LED) lights on boom, stick and cabin Extra: Machine is serviced and clean, ready for work

Condition: like new (used), functionality: fully functional, Year of construction: 2022, Plant as new, used only three times!!! Hammer mill Type: HMC-4 Motor power: 4 kW Number of hammers on rotor: 16 Capacity: 150–350 kg/h Material extraction system Nedpfx Ajx Dhbzeh Rjkw Type: FM300SN Output: 3900 m³/h Motor power: 2.2 kW This plant is suitable for shredding both plastic parts as well as wooden slats and branches.

Condition: used, power: 100 kW (135.96 HP), fuel type: diesel, color: other, Year of construction: 2017, operating hours: 12,235 h, Applicable material: Waste Empty weight: 22.900 kg Make of engine: Liebherr D834 Serial number: 097287 Delivery terms: EXW Please contact Christiaan Dekker for more information = Additional options and accessories = - Elevating cabin = Remarks = Liebherr LH22 M Year: 2017 Hours: 12235 Liebherr sorting grab 4 x Stabilizer Hydraulic lift cabin Nedpfx Ahjw I Ex Tj Rokw Central greasing Webasto heating CE Always Liebherr serviced

Condition: used, Year of construction: 2014, Sennebogen material handler 835    • 11,376 operating hours    • 6-cylinder water-cooled engine Njdpfx Aoyfx Sheh Rjkw    • Dutch machine    • Equipped with central lubrication    • Solid rubber tires    • 4 stabilizers    • Cameras for all-round visibility    • Joystick control    • 2 units available! Condition: Used Year of manufacture: 2014

Year of construction: 1985, condition: repair required (used), functionality: limited functionality, Schenk-Trebel Material Testing Machine Type RME 250 kN • Load frame and drive unit by Schenk Trebel, year of manufacture 1985, total height approx. 3.3 m. Traverse stroke approx. 2 m • Modernization around late 2003: Equipped with "testControl" control electronics from ZwickRoell Nodeyhb Rljpfx Ah Rekw • Retrofit in 2010: Universal extension measurement system MultiXtens from ZwickRoell, with swiveling device and two pairs of gauge arms (see photo), plus a new testControl module • Info: The testControl module operates with the current software "testXpert III" from ZwickRoell (one license for testXpert III version 1.51 is included in the price) • Temperature chamber (see photo) that can be moved into the test area of the machine, built 2006 by RS-Simulatoren Prüf- & Messtechnik, heatable up to approx. 200°C; coolable with liquid nitrogen down to approx. –40°C • Load cells: 250 kN and 50 kN (currently installed, see machine photo); additionally: 5 kN, 1 kN, and 500 N (see photo) • 2 wedge specimen holders (see photo) Accessories (according to the photos or the MultiXtens system) can be sold separately upon request. Condition of the machine The machine has been in use for testing until early 2026. Utilized for testing: The 50 kN load cell and traverse displacement sensor (both sensors last calibrated on 06.05.2024 incl. standard inspection). A fault in the drive servo amplifier (component in the testControl module) has led to frequent connection interruptions to the software and drive stop until the hardware and software are restarted, starting in autumn 2025. The servo amplifier or the entire testControl module will need to be replaced (cost information available from the supplier). The 250 kN load cell was last calibrated on 11.02.2021 but has not been used for measurements since. The other load cells, the MultiXtens system, and the temperature chamber have not been used or calibrated in recent years. The two hydraulic clamping units visible in the machine on the photos will be removed and remain with the seller.

Condition: ready for operation (used), WEILER Condor VS 2 from university (test laboratory) - Guides "as new" - Centre height: 165 mm - Swing diameter over bed: 330 mm Nedpfx Ajyu Hl Ijh Rjkw - Distance between centres: 800 mm - Speed range: 28–2800 rpm - Automatic longitudinal / cross feeds - Spindle bore: 40 mm - Threading / metric / imperial etc. - Collet quick-change system incl. collets - Four-jaw chuck Röhm - Faceplate - Chuck guard - Multifix toolpost with inserts - Emergency stop - Documentation Dimensions (LxWxH): 2 x 0.8 x 1.6 m / Weight: 900 kg Subject to errors and input mistakes.

Condition: used, empty load weight: 7,540 kg, maximum load weight: 31,460 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, first registration: 06/2011, suspension: air, tire size: 385/65 22,5, tire condition: 30 %, color: white, Year of construction: 2011, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 40612 Feldbinder, EUT 55.3 * Year of manufacture: 2011 * ABS (Anti-lock Braking System) * Alloy wheels * Air suspension * Steering axle * Air coupling head (red & yellow) * 15-pin connector * Lift/lowering device * Storage/tool box * Hose box left and right * Bottom outlet * Folding ladder & railing * Baffle wall * Suspension: Air * Gross vehicle weight: 39,000 kg Nkedsyicwgjpfx Ah Row * Unladen weight: 7,540 kg * Payload: 31,460 kg * Permissible GVW: 39,000 kg * Axle manufacturer: Daimler * Tire condition 1st axle: 40% -- 40% - Tire size: 385/65 R22.5 * Tire condition 2nd axle: 30% -- 30% - Tire size: 385/65 R22.5 * Tire condition 3rd axle: 20% -- 20% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Manufacturer: Heitling * Volume: 54 m³ * Tridec steering system Disclaimer: Specifications subject to change, prior sale, and errors excepted. Find more photos and videos on our homepage. Our comprehensive services include, for example: * Purchase / sale / rental of commercial vehicles * Fast, hassle-free financing * Processing of all (export) documentation * Order of export/customs license plates * Vehicle reconditioning: new tarpaulins, lettering, painting, etc. * Professional loading & load securing * TüV inspections, registration service * Transportation of commercial vehicles Contact our trained specialists—we are happy to advise you.

Condition: new, Year of construction: 2021, Linishing machine for flat parts or rectangular tubes. Working capacity (mm) 120x140 Abrasive belt speed (m/s) 20 Abrasive belts (mm) 120x1850 Conveyor belt speed (m/min) 12 or 6+12 Abrasive belt motor (kW) 3 Consumption (A) 7 Nsdpfxeg R Sxvo Ah Rekw Dimensions approx. (mm) 975x880x1800 Weight approx. (kg) 350

Condition: used, Year of construction: 2018, No. 3085 Chipper / material shredder WEIMA WLK 800 used, year of construction 08/2018 approx. 1200 operating hours For various materials such as hard plastics, paper, foils, filaments, wood or textiles. Feed opening 800 x 1450 mm F rotor Rotor diameter 260 mm Rotor speed approx. 100 rpm Motor power 30 kW knife screwed Nkodpekzkwmjfx Ah Row incl. various spare knives and sieves Transport dimensions approx. 3400 x 1750 x 2100 mm LWH Weight approx. 2500 kg Sales on behalf of customers, from the Hesse location In order to avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale takes place in the ACTUAL condition Technical information, description of condition, year of construction and scope of delivery according to the manufacturer's brochure or previous owner, without guarantee Subject to prior sale Any warranty is excluded for used machines. The rule is "bought as seen". Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus statutory VAT, payment before pickup or shipping Terms of delivery: ex warehouse or location

Condition: good (used), fuel type: diesel, color: green, first registration: 12/2025, Year of construction: 2015, operating hours: 13,000 h, Drive: Wheel Mast length: 18 m Nkodpfjyvra Usx Ah Row CE mark: yes Technical condition: good Visual appearance: very good Damages: none Price: On request Please contact Ferdinand Pater for more information Sennebogen 835ME with K18 NEW slewing ring serviced

Condition: new, functionality: fully functional, Year of construction: 2025, coil width: 200 mm, product width (max.): 200 mm, overall weight: 80 kg, warranty duration: 12 months, working width: 200 mm, product height (max.): 3 mm, roll width: 64 mm, Silicon+ SFS 200 Servo Roll Feeder Compatible with all kind of presses, primarily used on Bruderer, Schaal and Mabu machines. Feeding length – min 0.10 mm to max. 9999.99 mm Feeding width – max. 100 mm, 200 mm or 300 mm. Depending of model required. Nedpfovptz Iox Ah Rekw Material thickness – 0.20 – 3.20 mm Feeding angle – 180° Die line height – ± 50 mm Max. feeding speed – 20 m/minute Strip release – Festo pneumatics Control – NC Touch screen Servo brushless motor – 0.75 KW, 1.8 KW or 2.3 KW. Weight approx. feeder: 80-150 kg. Feeder dimensions: 780 X 730 X 680 mm – The unit is driven by the brushless servo motor, with direct drive transmission, eliminate the gear clearance, abrasion, no noise, no lubrication, safely to a synchronized pair of roller segments. – Rolls can be made upon request with PU surface for delicate raw material feeding. – Synchronization of the feeder and punching machine is done easy through cam signal from PLC of a punching machine. – Programmable feeding can be done for up to 10 groups of feeding pitches and saved as recipes. The feed length can be steplessly adjusted during operation EUR 1 certificate of European origin and CE compliance. This information is subject to change without notice, we can make personalized feeders for your needs with prior agreement.

Condition: new, Year of construction: 2026, Dimensions (L/W/H) 1400x2450x2800 mm Total pressure 400 to Nkjdpfxoyk H Twe Ah Rsw weight of the machine ca. 12000 kg

Condition: new, Year of construction: 2025, feed 2-22 m/min Nksdpevz E Ukefx Ah Row Weight 60 kg Total power requirement 0,4 kw

Condition: used, mileage: 10,43,789 km, power: 331 kW (450.03 HP), first registration: 08/2013, fuel type: diesel, empty load weight: 6,200 kg, maximum load weight: 11,596 kg, overall weight: 18,000 kg, tire size: 315/70 R22,5, axle configuration: 4x2, wheelbase: 3,700 mm, next inspection (TÜV): 10/2026, fuel consumption (urban): 595 l/100km, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, total length: 5,955 mm, Year of construction: 2013, lifting height: 3,600 mm, Equipment: ABS, air conditioning, cruise control, differential lock, hydraulics, low noise, onboard computer, parking heater, traction control, Color: red, unladen weight: 6,200 kg, permissible total weight: 18,000 kg, tire size: 315/70 R22.5, 1st axle: , 2nd axle: , seats: woven fabric, interior color: grey, leaf-air suspension, tipping hydraulics: dual-circuit hydraulics for tank vehicles, retarder, digital tachograph, fifth wheel coupling: JSK 42KZ, 510 mm, electronic braking system (EBS), electronic stability program (ESP), traction control system (ASR), automatic climate control, stationary air conditioning, adaptive cruise control (ACC), air-suspended driver's seat, height-adjustable driver's seat, driver's armrest, seat heating, level control, H7 headlights, radio/CD, multi-function display, Bluetooth handsfree system, power steering, adjustable steering column, driver's lumbar support, 22-inch alloy wheels, electric windows, fog lights, exterior mirrors electrically adjustable and heated, kerb mirror, wide-angle mirror, immobilizer, central locking with remote control, CB radio, sun visor, central lubrication prepared, 2x fire extinguisher holders, refrigerator, axle load indicator, work lights, ambient lighting, hill-start assist, LED daytime running lights, 1x15 pin connector, rubber floor covering, Fleet Management System (FMS), information and service system, speed limiter, folding passenger seat, storage box, upper and lower bunk, EGR, SCR payload: 11,596 kg, unladen weight: 6,200 kg, German vehicle in top condition. Non-binding offer. Errors and prior sale excepted. The illustration may not correspond to the actual offer. Nkedpfxjyuk H No Ah Rew

Condition: used, material width 200 mm material thickness - 6,0 mm feed length 0 - 120 mm Weight 0,40 t required space 0,9 x 0,8 x 0,7 m SPECIAL DEAL as is where is, WITHOUT putting into operation, in given condition mechanical roll feed Nedpfxevuunte Ah Rokw drive via main shaft / pivot shaft of the press - pivot shaft / mounting plate not included max. no. of strokes approx. 1500 / min

Condition: used, Straightening and welding plate made of steel, solid material Machined steel plate from a tool frame Nsdpfehwn Tusx Ah Rjkw Length 2980 mm Width 1580 mm Thickness 94 mm - solid steel plate - milled surface - 4 bolted lifting lugs - plate with several symmetrical holes Net weight 3400 kg

Condition: used, Transistor pulse inverter for three-phase feed drives with analog control, servo controller SIEMENS type Simodrive 610 6SC6101-3A-Z Fab. No.: A 822M103 Z = A30+A20+A18 Year of manufacture: 1989 The Simodrive 610 transistor pulse inverters have been developed to supply the 1FT5/1FS5 three-phase servo motors. The dynamic characteristics of these motors are to be used optimally. The pulse inverters can be used for a wide variety of tasks by equipping the power section accordingly. This flexibility is further increased by expansion modules for the power section. Supply voltage: 3 AC 50/60 Hz 165 Volt or DC 220 Volt (suitable transformer: 380/165 Volt 5kVA (not included in delivery) Output voltage: 3 UC 200 Volt Efficiency: approx. 95 Number of feed axes: 4 Speed reference: +-10 volts Auxiliary voltage: 24 volts Njdpfx Ash D Syvjh Rskw Relay contact for messages fault/ready for operation dimension WxHxD: 339 x 440 x 300 mm Weight: approx. 25 Kg The servo drive is still ready for operation in a Gildemeister GDM42. Further components from the Gildemeister you will find under stock numbers: 60343, 60347, 60348

Condition: used, Electro Dual Screwdriving Unit with Automatic Feed and Pneumatic Double Stroke BÖLLHOFF Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriving unit is equipped with a pneumatic double stroke, operated via Festo valves and cylinders. Additionally, various monitoring systems are installed for full automation. Technical data: Torque of electric screwdriver: 0.6 Nm Gearbox torque: max. 10 Nm Speed: max. 20,000 rpm Rated voltage: 3~ 0-230 VAC Current consumption: max. 7 A (per screwdriver) Pneumatic long-stroke cylinder: 80 mm Pneumatic short-stroke cylinder: 20 mm Total pneumatic stroke: 100 mm Spring stroke for screwdriver: 20 mm Distance between both screwdriving tools: 73 mm - Equipped with a TORX bit T27 or TP27 (presumably for M6 screws) - Requires Bosch Rexroth LT303 power module for operation (power module not included) Screwdrivers 1 and 2 are each composed of the following components: Rexroth type servo motor Rexroth type 0 planetary gearbox Rexroth type 0 encoder Rexroth type 0 straight drive output Component details: Electric screwdriver unit Rexroth Servo motor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current consumption: max. 7 A Rated voltage: 3~ 0-230 VAC Weight: 0.8 kg Njdpfx Aehxvu Esh Rskw Gearbox unit Rexroth Type: 3GE27 SZ3 Material no.: 0 Efficiency: 90% Gear ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material no.: 0 Nominal torque: 12 Nm Reduction ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight drive output Rexroth Type: 2GA82 SZ2 1/4" SQ Material no.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction ratio: 1 Weight: 0.2 kg Installation length: 90 mm One 7 m motor connection cable is included in the delivery. Overall dimensions W x H x D: approx. 180 x 920 x 300 mm Total weight: approx. 20 kg Good condition

Condition: used, Electric dual screwdriver unit with automatic feed and pneumatic double stroke, mounted on handling device, handling system, manipulator for screwdriving technology. Screwdriving Unit: BÖLLHOFF / BOSCH REXROTH Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriver unit features a pneumatic double stroke via Festo valves and cylinders. Various monitoring systems are installed to enable full automation. Screwdriver 1 consists of the following components: - Rexroth type servomotor - Rexroth type 0 planetary gearbox - Rexroth type 0 encoder Nsdpjfx Hyfsfx Ah Rskw - Rexroth type 0 straight drive head Screwdriver 2 consists of the following components: - Rexroth type servomotor - Rexroth type 0 planetary gearbox - Rexroth type 0 encoder - Rexroth type 0 offset drive head Dimensions (WxHxD): 165 x 1000 x 200 mm Pneumatic long stroke: 30 mm Pneumatic short stroke: 20 mm Screwdriver spring travel: 20 mm Last screws used: M6 x 15 mm Electric screwdriver unit Rexroth Servomotor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm/A Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current draw: max. 7 A Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material No.: 0 Efficiency: 90% Reduction ratio: i=18.9 Max. torque: 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material No.: 0 Nominal torque: 12 Nm Reduction: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight drive head Rexroth Type: 2GA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction: 1 Weight: 0.2 kg Installation length: 90 mm Offset drive head Rexroth Type: 2VNA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction: 1 Weight: 0.6 kg Installation length: 153 mm Handling system: JÄGER HANDLING Type: Handy-flex 300 Horizontal movement: 400 mm Vertical movement: 450 mm Load capacity: max. 14 kg Handyflex reach: 250 to 650 mm Handyflex reach (swung out): max. 860 mm Swivel radius at full extension: max. 360° Guide column vertical: Ø 30 mm Guide columns horizontal: Ø 20 mm - Balancer for vertical movement - Adjustable load capacity - Adjustable stop for limiting swivel radius Dimensions (L x W x H): approx. 1150 x 650 x 1400 mm Total weight: approx. 90 kg Good condition Without the blue steel pallet as base plate Blue steel base plate is not included in the scope of delivery.

Condition: used, Material clamp, material gripper, load clamp carrying clamp, lifting clamp, block tongs Manufacturer: NORDGREIF Type 7548 Year of construction: 1997 Load capacity: 500 kg Gripping width: 280 to 420 mm - Width adjustment via trapezoidal thread with hand crank - Rubber protective coating on the gripping surfaces - for crane operation - with CE-marking Nksdodz Spnjpfx Ah Rew Own weight: 50 kg sound condition

Condition: used, Frame die-cutter - Swivel frame die-cutter - Flatbed die-cutter - Platen die-cutter - Eccentric press Punch + feed for the use of bandknife punching tools Flatbed die cutter HELMERDING type PSH 25 Com. No. EP 97784 Machine. No. 6073 Year of construction 1998 Compressive force 25 ton. Clearance between the tie rods 700 mm Table surface = installation space 800 x 670 mm Table surface = installation frame width 510 x depth 440 mm, plate thickness 20 mm Plunger surface 800 x 670 mm Hole in the table 490 x 420 mm Plunger stroke 45 mm Ram adjustment travel 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min. Motor power 15 kW Mains connection 400 Volt, 50 Hz - Controlled drive for infinitely variable stroke rate - Pneumatic clutch-brake combination Nkededzqmzjpfx Ah Rsw - ram compensation cylinder - VOGEL automatic central lubrication system - solid base plate with 4 swinging elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons good condition The machine was formerly used for cutting out cardboard blanks. Ideal for cutting out non-woven fabrics or similar for breathing masks.

Condition: used, Single-column eccentric press EBU Type 75 SKU Machine no. No. P 4598462 Year of construction 1962 Compressive force 75 ton. throat depth 300 mm Table surface 800 x 620 mm waste hole 325 x 225 mm Plunger surface 470 x 180 mm Clamping pin bore Ø 40 mm Table height above floor 845 mm Stroke adjustment 16 - 140 mm Plunger adjustment 80 mm Installation height max. approx. 420 mm Nkodsdzqltepfx Ah Row Stroke rate 60 + 105 strokes/min. Motor power 4 kW Mains connection 380 Volt, 50 Hz. - Pneumatic clutch/brake combination EBU - Overload protection with breaker plate in ram - UNIDOR tool monitoring system, type APS MINI - mechanically driven gripper feed with belt straightener OSTERKAMP, type ZPN 200/350 - strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds due to 2 V-belt stages on the wheel transmission - Two-handed operation - Simple work area shielding for swinging open - Table height adjustment in lowest position = threaded spindles for adjustment 50 mm below floor level - Control cabinet and control panel for tool monitoring adjacent - Automatic central lubrication - 4 machine feet Space requirement L x W x H 2600 x 2300 x 2450 mm Weight approx. 5.5 tons good condition

Condition: used, Feeding technology / Feeding system / Vibratory feeder / Sorting unit / Bowl feeder Vibratory bowl, sorting device / Screw feeding with vibratory feeder for screw technology Feeding system DEPRAG Type: 0611-P/0.75-1S No.: 1183885 Year: 2011 - 2012 The system was used for feeding electrical connector pins. Product dimensions: Ø 4 mm, length 39 mm The pins are preloaded in the material hopper; the feed belt conveys the pins as required into the bowl feeder. From the bowl feeder, the product is transferred via the linear feeder to the product inverter. The product inverter orients the product into the correct position and makes it available for further processing. The unit comes from a prototype system; the external electrical control unit is not present and should be replaced by a PLC. Without modification, for example, suitable for the automatic and properly oriented feeding of threaded pins up to M4 x 40. The unit consists of the following components: 1 piece belt hopper / feed conveyor DEPRAG Type: B 10 Serial no.: 1178201 Order no.: 415050A Year: 2011 Fill volume: 10 liters Belt speed: 100 mm/min. Operating voltage: 24 V (DC) - Belt surface dimpled - Foldable stainless steel chute Weight 11 kg 1 piece bowl feeder KENDRION Type: OA C006.504101 / OA C006029 / KQF 465 B5 Bowl diameter (top): 200 mm Bowl diameter (bottom): 100 mm Bowl internal height: approx. 75 mm Sorting track width: approx. 5 to 8 mm Operating voltage: 230 V, 50 Hz. 1 piece DEPRAG vibratory controller for the bowl feeder Type: SZG Controller 6 Serial no: 35 pieces linear feeder KENDRION Type: WS3B/36 Part no: WSB003,564025 Operating voltage: 230 V, 50 Hz. 1 piece DEPRAG vibratory controller for the linear feeder Type: SZG Controller 6 Serial no: 35 pieces product inverter FESTO with 180° swivel range - 1 piece FESTO valve block CPV10-VI 18200 - Compressed air requirement approx. 6 bar Nkodpfekpwuuox Ah Rsw - 1 piece MURR base module type MVP12 - Complete unit mounted on a steel plate with 4 support legs Space requirements (L x W x H): 1150 x 520 x 860 mm Weight: 100 kg Very good condition

Condition: used, Decoiler and recoiler for coil material HMS Type BA 1.5-06/80 Machine no. Year of manufacture: 1991 Coil weight max. 8000 kg Coil outside diameter max. 1600 mm (with coil car) Coil outside diameter max. 2000 mm (without coil car) Diameter of coil support disc Ø 1700 mm Coil inner diameter, expansion range: 460-520 mm Coil width, nominal width max. 630 mm Width of expansion jaws: 750 mm Height of mandrel above base plate: 1500 mm - Mandrel driven by hydraulic motor with gearbox and gearwheel - Pneumatic overrun brake on mandrel TWINFLEX - Hydraulic service brake Nkedpfx Ahjhx R Ets Rew - Hydraulic stop brake - Hydraulic expansion of the mandrel, centrally via wedge slider system - Hydraulic pressing arm with hydraulically driven double pivot roller - Coil car with 12 ton lifting capacity and 300 mm lift - Decoiler on above-floor traveling frame with powered cross-travel drive - Hydraulic unit installed externally (was also used for other functions on a strip processing line) - Without electrical control cabinet (there is a control cabinet which supplied the entire strip processing line) Transport dimensions L x W x H 3500 x 1900 x 2500 mm Net weight approx. 5 tons Good condition – not electrically operational

Condition: used, Straightening and welding plate made of steel, solid material Machined steel plate from a tool frame Length 2980 mm Width 1380 mm Thickness 74 mm - solid steel plate - milled surface - 4 bolted lifting lugs - plate equipped with some symmetrical holes Nksdpfxohwn Tij Ah Row Net weight approx. 2380 kg