Used Mechanical Press Brake for sale (34,317)

Year of construction: 2001, condition: ready for operation (used), A hydraulic CNC press brake Hämmerle (M+S Brugg AG) is available. Press force: 2000kN, max. working length: 3100mm, max. stroke: 400mm, max. throat depth: 250mm, frame distance: 3240mm, max. opening width: 965mm, max. sheet thickness: 8mm. Machine dimensions X/Y/Z: approx. 4400mm/2700mm/3400mm, weight: approx. 16600kg, control system: CNC Infinitron. Documentation available. An on-site inspection is possible. Dedpozcyq Tsfx Aptscl

Condition: good (used), Year of construction: 2007, Used 3-meter press brake from Baykal Dodpfx Aozi Rmqoptocl Type: APH 3106 X 120 Capacity: 3100 x 120 tons NC control (basic) Lazersafe safety system for high speed 1 set of tooling Year of manufacture: 2007

Year of construction: 2010, condition: ready for operation (used), A CNC sheet bending machine Amada is available. Working width: 4000mm, pressing force: 2200kN, stroke: 350mm, axes: 8. Machine dimensions X/Y/Z: approx. 5600mm/2650mm/3300mm, weight: approx. 18000kg, control: Amada. An on-site inspection is possible. Dodpfxsxv A E Ss Aptjcl

Year of construction: 2000, condition: ready for operation (used), Working width: 2500mm, max. sheet thickness aluminium/steel/stainless steel: 3mm/2mm/1.25mm, feeding length range: 575mm-2500mm, feeding width range: 210mm-1500mm, max. bending height: 200mm, max. negative bend: 35mm, max. diagonal twist: 3300mm, rotary table position: 0°/90°/180°/270°, working height: 1150mm. Clamping stroke: 210mm, clamping force: 240kN, clamping lowering and return speed: 50mm/s, upper beam swivel range: 135°, upper beam swivel speed: 90°/s, lower beam swivel range: 135°, lower beam swivel speed: 90°/s. Machine dimensions X/Y/Z: approx. 4050mm/1600mm/2400mm, weight: approx. 13000kg. Documentation available. An on-site inspection is possible. Dcsdpjw N Shksfx Aptsl

Condition: new, Year of construction: 2025, sheet thickness - max. 8 mm pressure 200 t chamfer lenght 3200 mm engine output 15 kW return speed 105 mm/min working feed 9 mm/sec x-travel 600 mm Max. opening height 570 mm control DELEM DA53T GERD WOLFF KANTO 200T CNC Electro-Hydraulic Press Brake CNC axis accuracy 1) Machine sliders (Y1, Y2) – synchronisation precision: The slider movement axes control the bending depth and bending angle. The system consists of the control unit, two glass scales (Y1, Y2) installed on the work table, electro-hydraulic proportional valves and an amplifier. A closed control loop detects and controls the relative position of the slide and table as well as the speed and position of the slide. This ensures the synchronisation of the slide and maintains the bending depth and angle with high precision. Positioning accuracy: ±0.02 mm Repeatability: ±0.02 mm 2) Machine backgauge (X axis): The forward/backward movement of the X-axis controls the dimensions of the sheet metal cut. The stop bar is driven by a servo motor and moves the crossbeam via a ball screw and linear guide. Operation is stable and precise. Dsdpsxf Na Ujfx Aptscl Positioning accuracy: ±0.10 mm Repeatability: ±0.03 mm 3) Mechanical compensation system (V axis): The pull plate of the mechanical compensation is moved by a motor so that the compensation points are formed in an arc shape. The points perfectly compensate for the elastic deformation of the work table and slide to ensure angular constancy and straightness of the workpiece. Position sensors and CNC control ensure precise regulation.

Condition: used, Year of construction: 2005, Max. pressing force 80 t Max. length 2500 mm Stroke 200 mm Dcedpfxszdf D Ue Aptel Machine weight 5750 kg

Condition: used, Year of construction: 2023, operating hours: 2,216 h, total length: 5,750 mm, total width: 2,110 mm, total height: 3,640 mm, Weight: 27.760 kg Price: On request - Year: 2023 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 7376230761 - Operating hours: 2216 - Drive system: CNC - Control system brand: Durma - Control system type: DT-15 - Number of axes [pcs]: 4: Y1+Y2+X+R - Press force [ton]: 400 Dcjdpfx Apszcnpdjtjl - Max. working width [mm]: 4050 - Column gap [mm]: 3400 - Throat depth [mm]: 630 - Max. stroke [mm]: 365 - Crowning system: CNC-controlled - Punch holder: Quick-release - Tool holder type: European-style - Tools included: Yes - Options: Finger safety guard - Transport dimensions: 5750mm x 2110mm x 3640mm (l x w x h) - Transport weight [kg]: 27760kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2022, total length: 5,020 mm, total width: 2,150 mm, total height: 2,680 mm, Colour: White Weight: 9.100 kg Price: On request - Year: 2022 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 00030430-ERH - Drive system: CNC - Control system brand: Delem - Control system type: DA-66T - Power [kW]: 15.0 Dedpfxozkki Uj Aptscl - Number of axes [pcs]: 6: Y1+Y2+X+R+Z1+Z2 - Press force [ton]: 175 - Max. working width [mm]: 3100 - Column gap [mm]: 2550 - Backgauge depth [mm]: 750 - Crowning system: CNC-controlled - Punch holder: Quick-release - Tool holder type: European-style - Tools included: Yes - Options: Finger safety guard - Transport dimensions: 5025mm x 2150mm x 2680mm (l x w x h) - Transport weight [kg]: 9100kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2005, condition: used, Working length: 3100mm, pressing force: 2500kN, max. stroke: 465mm, rapid down speed: 190mm/s, working speed: 10mm/s, rapid return speed: 150mm/s, machine weight: 18t. Machine control retrofitted to Cybelec approx. 5 years ago. Safety control completely renewed in July 2026, new Siemens components installed in the control cabinet. Inspection possible by arrangement. Dodpfszun T Ssx Aptjcl

Condition: ready for operation (used), An older Promecam press brake is available. Pressing force: 100t, bending length: 4000mm, throat: 400mm, stroke: 100mm, installation height: 300mm, weight: approx. 8500kg. On-site inspection is possible. Dedswr Dwwopfx Aptscl

Condition: used, Year of construction: 1999, machine/vehicle number: 80858, functionality: fully functional, power: 15 kW (20.39 HP), pressing force: 150 t, stroke length: 200 mm, throat depth: 250 mm, total length: 4,400 mm, total width: 1,700 mm, total height: 2,500 mm, overall weight: 10,400 kg, Equipment: CE marking, HACO ERM 40150 (80858) Technical condition: Used Bending length: 4100 mm Tonnage: 150T Type of press brake: Synchro Back gauge: Y1 + Y2 + X-R, CNC controlled Back gauge length: 800 mm Crowning: Yes (CNC controlled) Daylight opening: 400 mm Stroke: 200 mm Dodpfx Ajzxgxusptscl Control: BC 45 Robosoft, graphical control Motor power: 15.0 kW, 400V Tooling: Yes, 1 set of multiple bending tools Tooling standard: European standard Total length: 4400 mm Total depth: 1700 mm Total height: 2500 mm Weight: 10,400 kg Serial number: 80858 Year of manufacture: 1999 Delivery and installation at your location are, of course, possible; delivery costs and any additional costs will be discussed separately. Since 2019, we have been the Dutch dealer for HACO press brakes and shears. In addition to the sale of sheet metal processing machines, we offer a complete package for service, maintenance, and repairs.

Condition: excellent (used), functionality: fully functional, 60 TONS HYDRAULIC PRESSBRAKE Dodpfx Asim Si Rsptocl BENDING LENGTH 3000 MM Excellent condition! "Your Next Reliable Production Machine Starts Here"

Condition: used, 1x bending knife from a VOEST press brake Dcsdpey Tbvmjfx Aptjl Length: 4050 mm Weight: approx. 120 kg For further dimensions see pictures.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, pressing force: 130 t, stroke length: 250 mm, controller model: Cybelec, distance between stands: 3,050 mm, working length: 3,550 mm, TECHNICAL DETAILS Pressing force: 130 t Bending length: 3,550 mm Frame width: 3,050 mm Stroke: 250 mm MACHINE DETAILS Control system: Cybelec Dedpfxszk E Ais Aptjcl Dimensions & Weight Footprint: 4,000 x 2,000 x 3,000 mm Machine weight: 11,600 kg

Condition: good (used), For sale: PROMECAM PPH 25.12B press brake – French made. AMADA PROMECAM *Technical specifications:* - Force: 25 tons - Usable length: 1250 mm - Motorized back gauge on Y-axis and manual back gauge on X-axis, with digital readout on a remote control panel (2 counters) New 2009 tooling including dies and new 1010 punches. Dcsdpfszyyi Nsx Aptjl Videos available upon request.

Year of construction: 1971, condition: ready for operation (used), Max. stroke: 100mm, max. press force: 50t, max. oil pressure: 300kg/cm², motor power: 5.5hp, approx. 4kW, pump: Gury 6-16. An inspection on site is possible. Dcodpfezbb R Sjx Aptsl

Condition: new, Press brake tool-Dies for Lvd press brake bending Dcsdjv N U S Iepfx Aptsl 78 degree H130mm V60mm/80mm/100mm L500mm/L510mm/L515mm/L550mm sectionalized

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Downstroke bending machine with 4-axis CNC control Serial No. MK 285 Year of manufacture: 1998 CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Tool installation height: max. 414 mm Table width: 55 mm Table height above floor: 950 mm Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Working speed: approx. 1.6 to 15 mm/s Motor power: 9 kW Power supply: 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN software version 5.07 TS1, Y1 and Y2 axis for ram - 2-axis backgauge, X-axis (backgauge depth adjustment), R-axis (backgauge height adjustment) - 2 backgauge fingers, laterally adjustable by hand (Z1, Z2) - Ram drive via 2 servomotors and belt drive - Working speed steplessly adjustable - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for the upper tool (UKB system, type 50.571, UKB System A) - Tool holder for lower tool, 55 mm wide with 13 mm groove, 21 mm groove depth (Trumpf system or UKB System B) - Supplied without bending tools (a new set from UKB costs approx. 3,600 EUR net) - Displayed total operating hours = 8,120 h - Number of working strokes: 1,049,789 strokes Dodpoxpqy Dsfx Aptecl Space requirements (L x W x H): 3450 x 1850 x 2650 mm Weight: 5,000 kg Good condition

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 1301, power: 11 kW (14.96 HP), pressing force: 150 t, stroke length: 200 mm, table width: 100 mm, clearance between the columns: 400 mm, total length: 5,200 mm, total width: 1,730 mm, total height: 3,240 mm, overall weight: 10,500 kg, Equipment: CE marking, Adjustable sheet metal support arms, front side Parking station for sheet metal support arms, left side WILA crowning system Under power Max. bending length: 3100 mm Distance between uprights: 2550 mm Max. pressing force: 150 tons Distance to table mount: 590 mm Max. stroke: 200 mm Table width: 100 mm Upright overhang: 400 mm Descent speed: 300 mm/min Working speed: 10 mm/min Return speed: 120 mm/min X-axis range: 0 - 1000 mm Number of controlled axes: 6 Crowning: Yes Dsdpfezl Ahrex Aptjcl Power: 11 kW Length: 5200 mm Width: 1730 mm Height: 3240 mm Weight: 10500 kg

Condition: new, functionality: fully functional, Energy-efficient, precise, and fast press brake Driven by servo motors and ball screw Bending length: 1300 mm Press force: 40 t Stroke: 150 mm Comparable to Durma, Baykal, Ermaksan, Trumpf, Amada, etc. Installation height: 375 mm X-axis travel: 440 mm X-axis speed: 1000 mm/sec R-axis travel: 150 mm R-axis speed: 100 mm/sec Y-axis positioning speed: 150 mm/s Bending speed: max. 20 mm/s Retraction speed: 150 mm/s Motor power: 2 x 3.8 kW Machine length: 1880 mm Machine width: 2435 mm Overall height: 2320 mm Machine weight: 3400 kg Standard equipment: European clamping system (Promecam) at the top 60 mm die holder at the bottom Stable X + R axis back gauge, CNC-controlled 2 pcs. back gauge fingers, manually adjustable on linear guide Dcsdpoq D Dv Dsfx Aptsl Foot pedal with emergency stop button Including the following options: DA66T control system Fiessler AKAS 2M laser finger protection + FPSC Safety PLC (manual) 1 set of upper tooling for the entire bending length: Angle (°): 85° H: 104.65 R: 0.8 Max T/m: 100 Material: C45 1 set of lower tooling for the entire bending length: Type: Multi-V die (4-way) Angle (°): 85° H: 60 V: 16 - 22 - 35 - 50 Max T/m: 80 Material: C45

Condition: new, Equipment: CE marking, European technician service, installation, training No. Name Parameter Unit 1 Nominal force 1600 KN 2 Worktable length 3200 mm 3 Worktable height 850 mm 4 Distance between vertical 2700 mm 5 Stroke 250 mm 6 Equipping die height 500 mm 7 Throat depth 400 mm 8 Control axes 8+1Axes Y1, Y2, X1, X2, R1, R2, Z1, Z2+V 9 Y axis working speed Quick down 160 mm/s Working 10 mm/s Return 150 mm/s 10 Y axis repeat position accuracy ±0.01 mm 11 Main servo motor Power 18 KW Brand INOVANCE Speed 1500r/min 12 Work piece Precision Straightness 0.3 mm/m Angle ±30’ /m 13 Back gauge X axis Stroke 600 mm Max. speed 200 mm/s Repeat position accuracy ±0.02 mm 14 Back gauge R axis Stroke 200 mm Max. speed 150 mm/s Repeat position accuracy ±0.05 mm 15 Dimension (Approximate) Length 4000 mm Width 1900 mm Height 2600 mm 16 Weight(Approximate) 10500 Kg No. Parts Name Brand Brand Location Remarks 1 Main servo motor INOVANCE China 2 Servo motor and drive INOVANCE China 3 Main Electrics Schneider France 4 Oil Cylinder HEYAN China TOP BRAND 5 Seal ring NOK Japan 6 Hydraulic valve & Filter Rexroth BOSCH Germany 7 Pump Hawe Germany 8 Controller DA69T Netherlands 9 Toolings Cnstamp 10 Ball screw Hiwin China Taiwan 11 Guide rail Hiwin China Taiwan 12 Grating ruler GIVI ITALY 13 Footswitch Enchi China 14 Stop finger with linear guide YES Dcsdpfx Asy U Hmgsptsl 15 Crowing table Motorized 16 Front laser protection LNTECH CE standard 17 Side and Back doors with limit switch Schneider CE standard

Condition: used, TECHNICAL DETAILS - pressure : 4 [t] - number of supports : 2 - fixed table dimensions : 210 x 210 [mm] - fixed press assembly - hole Ø in table : 80 [mm] - number of strokes in sharpening / cutting : 50 - 150 [c/min] Dcjdpfxjuhahmj Aptjl - adjustable slide : 40 [mm] - fixed travel : 27 [mm] - max. height for tooling : 148 [mm] - longitudinal clearance between supports : 230 [mm] - max. part diameter in sharpening : 30 [mm] - max. part thickness in sharpening / cutting : 1.5 / 2 [mm] - voltage : 380 [V] - installed power : 1.5 [kW] - floor space : 1100 x 1100 x 1650 [mm] - weight : 500 [kg]

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Dcedpsya Iaqofx Aptsl Press brake with 6-axis backgauge and CYBELEC control Serial No.: Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Throat depth: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm travel Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working traverse: 1-10 mm/s Y return: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8 axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, laterally movable (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 gauging points up to max. 1080 mm - Ram with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light barrier - Operation via electric foot switch and/or two-hand control panel - Hydraulic upper tool clamping (TRUMPF system) with 20 mm clamping slot - Tool holder for lower tool, height 160 mm x width 60 mm, with holder slot 14 x 23 mm - Tool system TRUMPF, without tools Space requirement (L x W x H): 0 x 2500 x 3400 mm Machine transport height: 3360 mm Weight: 17,000 kg Good condition

Condition: excellent (used), Year of construction: 2001, For sale LVD PPEB 80/25 in very good technical condition. Under power, can be inspected any time Dedpforx S Hnjx Aptscl

Condition: good (used), For sale: PROMECAM PPH 25.12B press brake – manufactured in France. Dedpfx Aezyykaeptscl AMADA PROMECAM *Technical specifications:* - Force: 25 tons - Usable length: 1250 mm - One rear back gauge PROMECAM top and bottom tooling