Used Messschieber Mahr for sale (50)

Condition: used, Clamping plate, scribing-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Length: 630 mm -Width: 630 mm -Height: 130 mm -Plate thickness: 30 mm -with support ribs -Weight: 121 kg Dusdpfx Asfnr Ivja Nst

Condition: used, Outside micrometers, micrometer screw, outside micrometer Dujdpsk H R H Asfx Aa Net -Manufacturer: Mahr, outside micrometer -Measuring range: 225-250mm -Reading: 0.01mm -Locking device -other sizes: also available -Dimensions box: 400/230/H30 mm -Weight: 2,2 kg

Condition: used, Year of construction: 1999, Measuring machine, coordinate measuring machine, form tester -Handover: in current condition as viewed -Calculator missing, x-axis damaged (Carriage guide defective) -Manufacturer:Mahr, form tester type MMQ 40 -Measuring height: 490 mm -Technical data: see photos documentation Dusdpfx Aaoua Nl Ee Njt -Accessories: incl. calibration and measuring accessories / technical documentation, see photos -Dimensions: 700/450/H900 mm -Total weight: 218 kg

Condition: ready for operation (used), Measuring dimensions X/Y/Z: 610mm/610mm/200mm, resolution: 0.1µm, measuring speed: 250mm/s, measuring type: multisensor (video, laser, mechanical test probe), software: OptiCheck 3D 4.5 (MahrVision 3D), touch probe: TP200. 3x servo amplifier, X- and Y-axis motor were newly purchased. The machine was calibrated in December 2023. The machine has an electrical whirring noise that comes from the servo amplifier card. Documentation available. On-site inspection is possible. Dujdpeun Stisfx Aa Nst

Condition: good (used), Micrometer screws, micrometer screws, tooth width measurement, plate measuring surfaces Duodpfxeb A R Hys Aa Net -Measuring range: 50-75 mm -One rotation of the drum corresponds to: 0.5 mm -without locking device -large measuring surfaces -Measuring force: Ratchet -Including: case -Adjustable dimensions -Hand protection -Quantity: other sizes also available -Weight: 0.7 kg

Condition: excellent (used), Mahr Here we offer you a Helio-Pan II. Duedpfxsi Ezh Uo Aa Net max. workpiece weight 30 kg at center height 100 mm 80 kg with center height 150 mm measuring range length 0 mm to 700 mm measuring range outer diameter 0 mm to 120 mm max. throwing distance to be measured 100 mm tip height 100 mm Measuring blades probe and caliper 1 mm x 5 mm Dimension (W x D x H) machine 2060 mm x 920 mm x 1750 mm controller box 600 mm x 800 mm x 2200 mm Weight approx. 900 kg Electrical power 230 V / 1200 W / 50 Hz Air pressure 6 bar Type: Helio-Pan II 700 Scope of delivery: (See picture) Further questions we can answer on the phone for you. Written order possible by email or fax

Condition: good (used), Lever gauge, dial gauge, probe, probe, centering device -Manufacturer: Mahr, Millimess dial gauge -Measurement range: 0-50 µm -Reading accuracy: 0.001 mm -Dimensions case: 110/80/H20 mm -Weight: 0.2 kg Djdpfx Ask H R E Tea Nout

Condition: used, Digital Caliper, Vernier Caliper MAHR Workshop Caliper Djdpfx Ajxf Uw Eea Nout Model: MarCal 18 ESA Nominal measuring length: 500 mm Measuring range: 0 to 550 mm Measuring accuracy, display accuracy: 0.01 mm Jaw length: 150 mm Hole measuring attachment: 15 mm - LCD display, character height 10.5 mm - Display in mm or inch - Lightweight design, slider and rail made of hard-anodized aluminum (1100HV) for weight reduction - Smooth and uniform movement due to prism guide - Measuring surfaces made of hardened, stainless steel - Battery-operated (CR 2032) - Supplied in wooden case Weight of caliper: 1.3 kg Weight including storage case: 3.2 kg Good condition

Condition: used, Year of construction: 1980, max. wheel diameter 400 mm gear width NA mm max. module 5 min. module total power requirement kW weight of the machine ca. t Dusdpfxet Hw Ebs Aa Njt dimensions of the machine ca. m Manual Two Flank Gear Tester

Condition: reconditioned (used), Mahr Rougness Measuring system M2 Djdpfx Aevki Slja Nout - measuring range 12,5mm - skid probing 300µm - computing device with TFT display - Printer - Adjustable rack with turntable

Condition: excellent (used), functionality: fully functional, measuring range X-axis: 25 mm, measuring range Z-axis: 1 mm, travel distance Z-axis: 550 mm, Well-maintained Mahr surface roughness measuring instrument SD26 with fixture for measuring shafts and axles from Messtechnik Triesen. Measuring ranges: Z = 0.8 mm (manually height-adjustable column), X = 25 mm. Machine has been completely overhauled and inspected. PC (Windows 10) and Mahr measuring software are installed. Extensive set of new replacement styli included. Includes base frame for PC and printer as well as accessories. Price for delivery within the EU. Dusdpfexddf Nox Aa Nst

Condition: good (used), Mahr statistics printer Digimet SP1 incl. manual Dsdpfx Aaoni Rtpo Njut

Condition: excellent (used), Two Digital Calipers Digital lightweight caliper, Garant 800, identical to Mahr MarCal ESA 800, measuring range 800mm, with wooden case Duedpfxew Tcvyo Aa Nst Digital caliper Mitutoyo 700-111, measuring range 150mm The batteries have been replaced or are in good condition. The measuring tools can be demonstrated on-site by appointment. We only offer machines that are available and ready for demonstration in our warehouse – see “more offers from this seller.”

Condition: used, Year of construction: 2009, functionality: unexamined, machine/vehicle number: 1-1028-09, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 200 mm, workpiece weight (max.): 30 kg, total height: 1,663 mm, total width: 910 mm, total length: 1,232 mm, overall weight: 30 kg, Equipment: documentation/manual, We are offering this used Mahr / Hexagon Optiv Performance MS 442 coordinate measuring machine, year of manufacture 2009. The machine was factory overhauled in 2023, purchased by us, and has seen minimal use since then. Duodpfx Aeyf N Iysa Nst Serial number: 1-1028-09 Measuring range: 400x400x200mm Dimensions: 910x1232x1663 Weight: 940kg Maximum workpiece weight on the glass plate: 30kg Includes camera with 2-stage zoom Includes measuring laser Includes LED ring light Accuracy: Length measurement deviation: according to VDI/VDE 2617-6.1 MPEE1: 1.4µm+L/200mm MPEE2: 1.5µm+L/150mm Includes 19" CNC real-time controller based on Windows 10 (32-bit) upgrade kit Includes Renishaw PI200 probe interface Includes Renishaw TP200 probe body Includes Renishaw probe holder Includes various probes & heads Includes OptiChek3D software If you have any questions or need further information, please feel free to send us a message.

Condition: excellent (used), Perthometer Roughness measuring instrument Brand: Mahr Model: S3P Dedpfxexlzu Rs Aa Neut Consists of: Steel measuring plate Cross table Perthometer PRK feed unit Various measuring tips Standard geometry PGN1

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: MMQ44-5440633#2116, For sale: Mahr form tester in good, fully operational condition. The form tester is ideal for measuring roundness, flatness, concentricity, as well as other form and positional parameters in quality control and metrology labs. There are no more jobs for the machine, which is why it is being sold. ✔ Fully functional Dusdpfxoxy Nnne Aa Not ✔ Includes PC & software ✔ Accessories & ergonomic measuring table included ✔ Device can be inspected and tested on site at any time

Condition: good (used), Year of construction: 2015, measuring range Z-axis: 50 mm, feed length X-axis: 200 mm, travel distance Y-axis: 500 mm, A Mahr contour measuring station is for sale in good, used condition, as shown in the pictures. Technical data: • Manufacturer: Mahr GmbH Göttingen • Model: XC-20 With feed device: PCV-200 • Measuring range: approx. 0.2 to 200 mm • Measuring range (in Z): approx. 50 mm • Includes 2x measuring probes: Dodexpw Syopfx Aa Neut - CP probe arm 350-M/16/16/6.5 double tip - PCV/CD probe arm 350 With measuring stand: ST-500 • Height adjustment range: approx. 500 mm • Hard stone measuring plate: approx. 700x550 mm With MCP-21 hand-held control panel Includes Midrange Standard control system • Year of manufacture: 2015 • Condition: Used, functional The MarSurf XC 20 is considered the absolute top-of-the-line device for contour evaluation. The optimally coordinated device configuration offers the highest performance standards. Shipping costs by freight forwarder: approx. £110 You will receive an invoice with VAT shown separately. Viewing/collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free loading. Subject to errors in technical data and prior sale.

Condition: used, x-travel:600 mm Duodpfscxxrgox Aa Nst y-travel:fest mm z-travel:650 mm weight of the machine ca.:ges. 0,124 t dimensions of the machine ca.:0,7 x 1,0 x 1,05 m surface measuring, testing and evaluating unit for roughness and unevenness parameters with measuring post and feed device, incl. data logger with profile memory and full digital measured-value processing, fully programmable, evaluation according to different evaluation programs with single measuring run, reference-plane measuring on badly aligned, curved and tilted surfaces, automatic correction of height offset and tilt, measuring program with permanent storage and quick access, clearly arranged control elements, universal by plug-in program module for special functions, measuring post PST-Se, large black granite base plate with a 14 mm T-slot, table 650 x 450 mm, PRK feed device, adaptable precision scanning device for roughness, unevenness and form measuring, tracing length 1,5-60 mm, guidance accuracy 2 µm, tracing speed 0,5 and 0,1 m/s, automatically adjustable, return speed 1,5 m/s, standard - interval and terminal contact operation, extensive accessories, exchange calliper, calliper height-adjustable, calliper holder, calliper, etc.

Condition: ready for operation (used), Year of construction: 2012, MarSurf M400 MarSurf SD 26 Mahr roughness measuring device with evaluation unit Brand: MAHR Model: MarSurf M 400 Touch probe: Free touch probe Measuring range roughness: +/- 250 µm, +/- 750 µm Scanning distance min.: 1.75 mm Scanning distance max.: 17.5 mm Cut-off wavelength: 0.25 mm, 0.8 mm, 2.5 mm Measuring profile memory (number of individual values): 40000 STK Measuring profile memory (number of profiles): 30 ST New price: 11.190 € net - Bluetooth connection between the feed unit and the display unit. - Measure in all directions horizontally, vertically and overhead. You are welcome to visit us for an inspection. You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Dsdpfx Aaeq Nl Ewo Njut Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: ready for operation (used), Mahr MarSurf M 400 SD26 roughness measuring device Brand: MAHR Model: MarSurf M 400 Djdpfx Ajvr S Rmoa Nout Probe system: free-probing system Roughness measuring range: +/- 250 µm, +/- 750 µm Minimum scanning distance: 1.75 mm Maximum scanning distance: 17.5 mm Cut-off wavelength: 0.25 mm, 0.8 mm, 2.5 mm Measurement profile memory (number of individual values): 40,000 pcs Measurement profile memory (number of profiles): 30 pcs New price: €11,190 net - Bluetooth connection between the feed unit and the display unit. - Measure in all directions horizontally, vertically and overhead. You are welcome to come by for a viewing. We would be happy to organize a cost-effective shipping company for you! You will receive a proper invoice. A net invoice can also be created for foreign customers. A valid VAT identification number is required. Subject to prior sale. Visit our shop and take a look at our other offers. Company names and trademarks shown are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article can occur and are reserved.

Condition: ready for operation (used), Mahr MarSurf M 400 SD26 Roughness measuring device Measuring device Evaluation unit Brand: MAHR Model: MarSurf M 400 Touch probe: Free touch probe Measuring range roughness: +/- 250 µm, +/- 750 µm Scanning distance min.: 1.75 mm Scanning distance max.: 17.5 mm Cut-off wavelength: 0.25 mm, 0.8 mm, 2.5 mm Measuring profile memory (number of individual values): 40000 STK Measuring profile memory (number of profiles): 30 ST New price: 11.190 € net Calibration standard is not included in the scope of delivery Dodpfx Aajvclcwe Neut - Bluetooth connection between the feed unit and the display unit. - Measure in all directions horizontally, vertically and overhead. You are welcome to visit us for an inspection. We will be happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved

Condition: ready for operation (used), MarSurf M300 MarSurf RD 18 Mahr roughness measuring device with evaluation unit The device can only be operated with a cable. Battery operation without function. Bluetooth Measuring principle: stylus method Probe: inductive skid probe Unit of measurement: selectable Measuring range: 350 µm Profile resolution: 8 nm Characteristic values: Ra, Rq, Rz (Ry (JIS) corresponds to Rz), Rz (JIS), Rmax, Rp, RpA (ASME), Rpm (ASME), Rpk, Rk, Rvk, Mr1, Mr2, A1, A2, Vo, Rt, R3z, RPc, Rmr (tp (JIS, ASME) corresponds to Rmr), RSm, RSk, RS, CR, CF, CL, R, Ar, Rx, Rv Vertical scale automatic/selectable Horizontal scale dependent on cut-off Total distance In according to ISO/JIS: 1.25 mm / 4.0 mm / 12.5 mm Number n of individual measuring sections acc. to ISO/JIS: selectable 1-5 Scanning speed 0.5 mm/s Probe tip: 2 µm Measuring force: approx. 0.7 mN Duedpfxevcly Ne Aa Nst You are welcome to visit us for an inspection. We will be happy to arrange a cost-effective forwarding agent for you. organize You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: refurbished (used), Measuring head Mahr (5313320), type "Millipilot 1332B" for Höfler gear grinding machine, reconditioned. External signs of use are present (light scratches, etc.), but technically the device is in perfect condition and ready for immediate use. Pickup or shipping can be organized at any time. Duedpfspl T D Usx Aa Net For further questions just contact me.

Condition: good (used), Mahr Perthen Perthometer S4P roughness tester 1 x Mahr Perthen Perthometer S4P roughness tester 1 x Mahr Perthen 6 86 20 63 1 x Mahr Perthen 42 50 01 50 up to 160 mm Ø Find more roughness gauges in other sizes- new and used Dodpfx Aoihfmuea Neut

Condition: good (used), Mahr 865 SE Indicator Calibrator Mahr 865 SE Indicator Calibrator with 1505 IC Indicator + 1299 IC/S Printer Height adjustable table More indicator calibrators in other sizes - new and used - you will find in our store! Djdpeihpvhjfx Aa Njut International shipping costs on request!