Used Milling Tools for sale (39,553)

Condition: good (used), Year of construction: 1982, functionality: fully functional, Tool milling machine with 3D control, manual handwheels, and a universal table adjustable in three axes. Control: Deckel Dialog Control 4: 3D contouring control, including drilling and milling cycles Monitor, electronic handheld control panel Terminal for program input and output Technical specifications: Travel range X/Y/Z 300 x 220 x 400 mm Speed 31.5 - 3,150 rpm with 21 gear stages Feed rate 4-2,000 mm/min Rapid traverse 4 m/min Drive power 1.6-2.0 kW SK 40 tool holder Hydraulic tool clamping Universal milling table with digital display: Clamping area 600 mm x 320 mm Table load 180 kg C-axis rotation range 360° A-axis tilt range 15°/45° B-axis swivel range +/- 45° Vertical milling head: Manual quill stroke - horizontally 65 mm, vertically 60 mm Additional equipment: Manual machine handwheels with scale Ledpfx Alowid Spjyeah Direct travel measurement of the NC axes Cooling water system Special accessories: Approx. 33 tool holders (without tools) - see photo High-speed milling spindle Machine data: Machine weight approx. 1,380 kg Space requirement including accessories L approx. 2,940 mm, W approx. 1,900 mm, H approx. 1,960 mm Power supply: 380 V, 50 Hz, 12 kVA The machine is in good, fully functional condition. It can be inspected with power and chippings by appointment.

Condition: used, Friedrich Deckel FP 2 LB Tool Milling Machine The accessories are not included in the scope of delivery but can be purchased in another auction via this link. Lot of Milling Tools The universal milling machine Deckel FP 2 LB is characterized by its extremely stable base and is designed as a floor-standing machine. This means that the machine retains its precision even when machining heavy workpieces weighing up to 1000 kg. Lajdpjgyw S Tjfx Alyoh Another feature is the 45-degree inclined bed. After removing the universal table, this design allows for direct clamping and machining of V-engine blocks with a 90-degree cylinder angle, such as American V8 engines. Furthermore, the long travel of 800 mm is advantageous in this application. Technical data: Deckel Universal Milling Machine FP 2 LB Digital display: 3-axis digital display Heidenhain Travel X-axis: 800 mm Travel Y-axis: 300 mm Travel Z-axis: 400 mm Tool holder: SK 40 clamping thread S 20 x 2 Milling head type: Vertical milling head Speed range: 40 - 2000 rpm Number of steps: 18 Table type: Universal swivel/tilt table (± 45° / ± 15°) Table clamping surface: 1000 x 520 mm T-slot size: 16 mm Vise: 160 mm Connected load: 9.5 kVA Weight: approx. 1900 kg Dimensions: approx. 1570 x 1675 x 1850   You can find more new and used items in our shop! International shipping costs available upon request!

Condition: ready for operation (used), Year of construction: 1984, Immediately available from training center: MAHO Tool Milling Machine Model MH 600 Year of manufacture: 1984 Table: 700 x 400 mm Travel X/Y/Z: 500/400/400 mm Speeds: 40 – 2500 rpm SK 40 Spindle stroke: 80 mm Coolant system Ledpfx Als Aa Il Ajyoah Drive: 4 kW Feeds: 8 – 400 mm/rev Head swivels 90/90 degrees Weight: 1900 kg Price: EUR 2,250.-- plus VAT, ex location.

Condition: reconditioned (used), Year of construction: 1980, functionality: fully functional, For sale: a drilling and milling machine from Alzmetall. Type: Plus 3 DG. Inspection and test run possible at any time. Laodpfx Ajzk U Dpelyoh Forklift available for loading.

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Lsdpfxexxb Rrj Alyeah Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 1962, Spindle mounting, vertical + horizontal SK / ISO 40 Angular table clamping surface 700 x 285 mm X-axis travel 500 mm Y-axis 200 + approx. 250 mm Z-axis 400 mm Quill stroke approx. 80 mm 18 main spindle speeds 40 - 2000 rpm 18 feed speeds 8 - 400 mm/min rapid traverse 1200 mm/min drive power 2,2 kW dimensions L x W x H 1150 x 1050 x 1650 mm Machine weight 1000 kg Accessories / special features: Ledpem Uygvefx Alyoah - Vertical milling head, swiveling R/L - Fixed angle clamping table - Feed + rapid traverse in all axes Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 1985, Deckel FP1 Aktiv with 3-axis Heidenhain digital readout, 3 active axes, rigid table, SK 40 M16 spindle taper. Central lubrication, operating manuals included. Good operational condition, comes from a vocational training center. Can be demonstrated under power by arrangement. Laedexwunzopfx Alyjh

Condition: good (used), Year of construction: 1964, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 200 rpm, spindle speed (min.): 40 rpm, input frequency: 50 Hz, Manufacturer: Deckel Type: FP2 Tool holder: SK 40 Travel ranges X/Y/Z: 500 / 200 / 400 mm Speed range: (18 steps) 40 - 2000 rpm Spindle stroke, vertical: 60 mm Spindle stroke, horizontal: 100 mm Feed rates: 8 - 400 mm/min Table size: 700 x 300 mm Motor power: 2.2 kW Connection: 400 V / 16 A plug Weight: approx. 1300 kg Space requirement L x W x H, approx.: 1200 x 1250 x 1670 mm Head swivels: 90° / 90° Equipment: - 3-axis digital display Ljdpfx Aloilg H Eeyeah - Coolant system We would be happy to demonstrate the machine in operation at your location. All information is subject to change without notice. Subject to prior sale.

Condition: good (used), Year of construction: 1998, functionality: fully functional, workpiece weight (max.): 200 kg, Universal machining center Manufacturer: MACMON Type: M 100 ADR Ledsrwml Aopfx Alyeah Technical data: - Heidenhain TNC124 control system - Machine number: 7989 - Year of manufacture: 1998 - Travels: X 310 mm, Y 170 mm, Z 330 mm - Spindle speed range: 40-2500 rpm (continuously variable in 2 ranges) - Feed rate: 10-800 mm/min (continuously variable) - Rapid traverse rate: 800 mm/min - Equipment: Vertical and horizontal spindle (including lifting device for vertical spindle) - Table size: 600 x 215 mm - SK40 - Drive motor: 2.2 kW - Connected load: 5.5 kW - Weight: approx. 750 kg - Space requirement: 1000 x 1160 x 1400 Includes complete documentation All information without guarantee. Subject to prior sale.

Condition: used, Year of construction: 1987, x-travel 500 mm y-travel 430 mm z-travel 400 mm Lsdpfs Adakfex Alysah Control HEIDENHAIN, TNC 114 B table surface area 800 x 390 mm spindle taper SK 40 spindle turning speed range 50 - 2500 U/min spindle drive 3 kW max. torque on the spindle 5 Nm feeds X-axis 4 - 1600 mm/min feeds Y-axis 4 - 1600 mm/min feeds Z-axis 4 - 1000 mm/min rapid traverse X/Y/Z axis 1,6 / 1,6 / 1,0 m/min power feed x/y/z 5000 N table load capacity max. 250 kg total power requirement 6 kW weight of the machine ca. 1,6 t dimensions of machine L x W x H 2,30 x 2,30 x 2,40 m Accessories: vertical head with hydr. tool clamping and quill retraction, solid table, various tool fixtures, coolant

Condition: excellent (used), Deckel FP 4 MK Deckel FP 4 MK machining center with Heidenhain TNC 113 control, manufactured in 1990. Fully overhauled by FPS in 2021. Excellent condition, CE compliant!! The machine comes from the prototype construction department of Castwerk Technologies. Lasdpfx Aljzy U E Esyeh Technical data: Year of manufacture: 1990 Fully overhauled by FPS in 2021 Digital display: 3-axis active digital display HEIDENHAIN TNC 113 Travel in X-axis: 500 mm Travel in Y-axis: 400 mm Travel in Z-axis: 400 mm Tool holder: SK 40 hydraulic tool clamping, DIN 2080 Milling head type: Vertical milling head Spindle speed range: 50 - 2,500 rpm, 18 steps Table type: Tilting table Table clamping surface: 800 x 490 mm T-slot size: 14 mm Weight: approx. 1,450 kg Dimensions: approx. 2,500 x 2,700 x 2,100 mm Accessories and equipment: Heidenhain TNC 113 control Hydraulic clamping, vertical and horizontal Automatic central lubrication Spindle brake Technical documentation, spare parts diagrams, operating instructions for the control and programming examples Handwheels Coolant system About the machine: Offered is a Deckel FP 4 MK machining center with a Heidenhain TNC 113 control. This universal milling machine is in very good original condition. It comes from a company where it was only used for training purposes. It has a very easy-to-use control system. Furthermore, the machine has hydraulic clamping in both vertical and horizontal positions. Switching from vertical to horizontal is very easy by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Deckel has been mechanically and electrically inspected by us. Take the opportunity to inspect and test the Deckel on site while it is powered on. You can find more milling machines from well-known manufacturers on our website.

Condition: excellent (used), Year of construction: 1982, functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis digital display, Heidenhain active control, and continuously variable feed. Technical data: >> Year of manufacture: 1982, Machine no. 2101-1995 >> Fixed angular table >> Speed: 40 - 2000 rpm >> Continuously variable feed in 2 axes >> Rapid traverse in 2 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travels X/Y/Z: 300/160/340 mm >> Vertical milling head, adjustable by 100mm on the spindle head >> Vertical quill and horizontal quill - SK40 >> Clamping system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital display Heidenhain >> Coolant system >> Operating manual, parts list Lodpfxjzrn Tyo Alysah About the machine: Offered is a Deckel FP1 universal milling machine in very good original condition. The machine has very little backlash and all spindles move easily. Even at maximum speeds, the milling machine runs smoothly. The FP1 was in a training workshop at a university and was used very little. This newer FP1 model has continuously variable feed in two axes, and the machine also has rapid traverse in these axes. A major advantage is the active 2-axis digital display. With this Heidenhain positioning control, you can enter dimensions that the machine will automatically approach. An oil change has been carried out. Mechanically and electrically inspected. The Heidenhain digital display makes working easier and even more precise. Take advantage of the opportunity to inspect and test this machine on-site while it is powered up.

Condition: used, Year of construction: 1998, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 430 mm, table length: 400 mm, table width: 800 mm, type of input current: three-phase, total height: 2,150 mm, total length: 1,900 mm, total width: 1,400 mm, rotational speed (max.): 2,500 rpm, rotational speed (min.): 50 rpm, MEXPOL D40A1 Universal Tool Milling Machine with HEIDENHAIN Digital Readout and Counter Support For sale is a robust MEXPOL D40A1 universal tool milling machine, manufactured in 1998. This machine is ideally suited for toolmaking, general mechanical engineering, single-part and small-series production, as well as repair and training workshops. The milling machine is equipped with a HEIDENHAIN ND 780 digital readout, which enables precise and convenient operation. The sturdy cross table with T-slots offers versatile clamping options. In addition, the machine features a coolant system and a counter support for supporting milling arbors during horizontal milling operations. The swiveling milling head expands the range of applications and enables flexible machining of various workpieces. The machine is in a well-maintained, used condition and was in operation until recently. Technical data: Manufacturer: MEXPOL Type: D40A1 Year of manufacture: 1998 Factory number: 50443 Lasdpfxezfxubo Alyeh Machine type: Universal/Tool Milling Machine Spindle mount: SK 40 Speed range: 50 - 315 + 400 - 2500 rpm (9 steps) Feed rate range: 10 - 63 + 80 - 500 mm/min (9 steps) Travel (X / Y / Z): 600 × 400 × 430 mm Table dimensions: 800 x 400 mm T-slots: 7 pcs, 14 mm wide 3-axis digital readout: HEIDENHAIN ND 780 Coolant system Counter support Swiveling milling head Equipment: HEIDENHAIN ND 780 3-axis digital readout, swiveling Swiveling control panel Coolant system Hydraulic tool clamping Drilling quill Counter support for milling arbor operation Work light Handwheels for all axes Fold-up, all-around chip guard with gas springs Total weight: approx. 1,500 kg Machine dimensions: approx. 1900 × 1400 × 2150 mm (L x W x H) Subject to prior sale and errors.

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: DC55-031, feed length X-axis: 1,000 mm, feed length Y-axis: 800 mm, feed length Z-axis: 800 mm, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 6,000 rpm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, mount diameter: 175 mm, position of the milling head: 150 Achse Y, type of input current: three-phase, rotational speed (max.): 6,000 rpm, overall weight: 15,000 kg, table load: 1,000 kg, input voltage: 400 V, space requirement width: 4,000 mm, space requirement length: 6,000 mm, space requirement height: 3,000 mm, year of last overhaul: 2025, workpiece weight (max.): 1,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, The machines are equipped with spindle speeds of 0-6000 rpm and SK 50 spindles. The first gear stage, 0-1000 rpm, can be switched to a lower gear ratio, providing very high drive power even in the low speed range, suitable for heavy machining. The pallet changer handles 2 pallets; a total of 8 pallets are available and compatible with both machines. The tool changer has 40 positions. Additional equipment: Internal cooling system Chip conveyor Paper band filter system Separate oil cooler Various tool holders 1x Double angle plate 800 x 800 mm, manufacturer Kelch Lajdpfxjz D Tp Ue Alyjh 3x Double angle plate 800 x 600 mm, manufacturer Kelch 4x NC vise Almatic Type NC 200 with 2 base plates (can be assembled as a clamping tower) Optionally, a second machine of the same type is available. Disassembly of the machine is possible after costs have been covered, with self-disassembly preferred.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, operating hours: 3,000 h, number of axes: 5, number of slots in tool magazine: 24, We are offering this well-maintained, young COSMEC 5-axis CNC milling machine, model CONQUEST 515, from 2021. The machine is currently in production and operates on a single-shift basis. It can be inspected and tested while powered on. - Training/instruction for your employees can be provided at our facility before the machine is disassembled. - Year of manufacture: 2021, commissioning date: 05/2021 - Work table: 4000mm x 1500mm - OSAI control system - 24-position tool changer (2 disks with 12 tools each) - Portal clearance: 500mm - 5-axis swivel head: 18KW, 500 - 24,000 RPM - NC-controlled extraction hood - Bumper safety system - Control cabinet with air conditioning unit - Mobile control panel Laodpfxozukurj Alysh - Central lubrication system - Vacuum pump: 250 m³/h - Approximately 24 HSK63F tool holders - Automatic tool length measurement - Nesting table - Nesting CNC milling machine - Swivel machining is possible The price is "Ex Works". We will gladly assist with disassembly and loading. Similar to Reichenbacher Vision or Homag CNC. If you have any questions or would like to arrange a viewing, please feel free to contact me by phone or email.

Condition: good (used), Year of construction: 1973, Deckel FP2 tool milling machine with 2-axis Heidenhain digital readout, rigid table, SK 40 spindle holder. Long sliding milling head, accessories: various collets and milling arbors, counter holder. Good working condition, can be demonstrated under power by arrangement. Laedpfx Aeumclaelysh

Year of construction: 1989, condition: used, Control: Heidenhain TNC 355, weight: approx. 3.5t, operating hours: 24,197h, with accessories, the machine requires repairs and maintenance. An on-site inspection is possible. Lsdjz S Iwkepfx Alyjah

Year of construction: 1989, condition: used, Control: Heidenhain TNC 355, operating hours: 69,557h, with accessories. An on-site inspection is possible. Lasdpsz S Iwqsfx Alyjh

Year of construction: 1972, condition: ready for operation (used), Spindle-to-table distance min./max.: 81mm/481mm, counter support spindle center distance: 195mm, spindle head swivel: 360°, milling spindle diameter: 70mm, spindle adjustment: 100mm, headstock adjustment: 300mm, table dimensions X/Y: 480mm/820mm, travel X/Y/Z: 500mm/200mm/400mm, max. workpiece length: 400mm, spindle speed: 1600rpm, feed X/Y: 500mm/min, feed Z: 250mm/min, spindle head swivel: +/-30°, machine dimensions X/Y/Z: approx. 1600mm/2550mm/1700mm, weight: approx. 2300kg. The machine was electrically tested at the end of 2025 and a defect of the emergency stop switch was discovered. Documentation available. On-site inspection is possible. Laodex S Rcmepfx Alyjh

Condition: used, SZIM MSN-500 Traditional Tool Milling Machine. X movement 700 mm Lajdpfev Sk Iqjx Alyoh Y movement 450 mm Z movement 500 mm Speed 25 - 3150 f/min Power requirement 15 kVA Machine dimensions 3100 x 2900 x 2100 mm Machine weight approx. 3000 kg Good working condition. Please check out our other listings as well.

Condition: used, Manufacturer: MAHO, Type: MH 700, Serial No. 71249, Travel range X/Y/Z 700 x 450 x 450 mm, Tool holder SK 40, Table size approx. 900 x 400 mm, Control system, Manufacturer: SIPRO, Type: SIAX 121 +++ ATTENTION: This machine is part of an online auction! +++ Lsdpfoz Tqxgex Alyjah

Condition: defective spare-parts repository (used), functionality: not functional, type of input current: three-phase, input voltage: 400 V, CNC universal milling machine Mikron WF 52 C with Heidenhain TNC 425 control (DEFECTIVE) Laodpfx Aoz A Uiaslyeh The machine is defective and will be sold as is. The screen of the control unit is missing. Type 52C/TNC425, connection 3 x 400 V, 50 Hz, 50 A, 20 kW, control voltage 24 V. Fully enclosed work area with sliding doors, T-slot table, vertical milling spindle, telescopic covers, coolant supply, electronic handwheel on the control panel. Location: Homburg (Saar), Germany. Viewing possible by appointment. Price on request, net plus VAT, ex works; dismantling and loading upon agreement. All information without guarantee.

Condition: good (used), Spindle mount, vertical + horizontal SK 40 Arbor adjustment approx. 80 mm Table clamping surface 800 x 340 mm Travel distances X-axis 500 mm Y-axis 350 mm Z-axis 500 mm Speed range 35 – 1550 rpm Table adjustment: Feed rates 6 – 270 mm/min Rapid traverse rates X + Y Drive power approx. 3 kW Machine dimensions L x W x H 1350 x 1300 x 1880 mm Weight approx. 1750 kg Accessories / Special features: • Like-new 3-axis digital display SINO • Vertical milling head, swiveling R + L, arbor adjustment • Horizontal milling spindle • Feed in all axes • Rapid traverse X + Y • Coolant system • Emergency stop switch Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 Ledein Dktspfx Alyeah DE - 44143 Dortmund - Wambel / Germany

Condition: new, Year of construction: 1990, functionality: fully functional, Clamping ring for vertical quill TOS/INTOS FNG, FNGJ, FNGP tool milling machines. Machining must be carried out to suit the specific machine. We are happy to take care of this for you, as well as any repairs of milling heads for machines from the TOS/INTOS Zebrak production. Laodpfx Alsyghywoysh

Condition: ready for operation (used), DECKEL FP 1 / 3 - Axis Active Digital TNC 113 -CE marking -Travel ranges X / Y / Z: 300x160x340mm Laodozvcbgepfx Alyoh -Heidenhain TNC 113 / Linear control -Spindle speed range: 40 - 2000 RPM -Feed rates continuously adjustable in all three axes -Rapid traverse in all three axes -Swiveling vertical head & drilling quill -Vertical & horizontal milling capability -Tool holder: ISO 40 -Drive power: 1.5 / 1.9 KW -Fixed angular table -Chip tray -Coolant system -Work light -Documentation Dimensions: L x W x H: 1.3 x 1.2 x 1.8 meters / Weight: 950 kg Errors and omissions excepted.