Used Mini Prong Press for sale (14,611)

Condition: excellent (used), Year of construction: 2006, Dimensin: 2650 x 2100 x 2100 mm Clamping Force: 635 KN Working pressure: 206 bar Piston diameter: Ø200 mm Stroke: 140 mm Daylight: 150/180 mm Heating plant dimension: 250 x 300 mm Max. mass of heating plant: 70 kg Oil reservoir: 100 l Hnjdpjykawpefx Aaleh Rated power: 19.66 kW Heater capacity: 9.6 kW Vacuum motor power: 2,6 kW Between light curtain and mould area: 270 mm Stroke of vacuum cover: 140 mm The vulcanizing press from manufacturer PAN STONE, model S-V-65-2RT-PCD, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. The machine was part of a production line responsible for manufacturing high-performance seals used in various industries. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: good (used), Year of construction: 1997, Clamping Unit: Clamping force: 7,000 kN Operating pressure: 250 bar Specific pressing pressure: 610 N/cm² Number of levels: 2 Installation height with 75 mm heating plate & 20 mm insulating plate: approx. 2x 190 mm Piston stroke: approx. 400 mm Piston 1 diameter: 543 mm Clamping force, rapid traverse: approx. 2 x 85 kN Retraction force: approx. 2 x 47 kN Operating pressure: 300 bar Piston 2 diameter: 60/40 mm Stroke: 400 mm Estimated weight: approx. 16 tonnes Hydraulic System: Pressure adjustment: 40 - 300 bar Flow rate regulation: 0 - 99 % Flow rate l/min (HD): 45 against 300 bar Drive power: 22 kW Tank dimensions (LxWxH): 1000 x 770 x 535 mm Hnsdpfxeykawco Aaleh Closing Speed: Rapid traverse: approx. 40 - 50 mm/s Slow closing: approx. 0 - 20 mm/s Pressing speed: approx. 0 - 3 mm/s Slow opening: approx. 0 - 20 mm/s Opening, rapid traverse: approx. 0 - 60 mm/s

Condition: used, Year of construction: 2005, functionality: fully functional, Clamping force: 4900 kN Working pressure: 206 bar Heating plate dimensions: 700 x 700 mm diameter of piston: 558,8 mm max. stroke: 250 mm daylight: 300 mm max. mass of heating plant: 560 kg capacity of oil tank: 1100 l rated capacity: 82 kW heating capacity: 56 kW enginge output, vacuum motor: 4 kW Stroke of vacuum cover: 200 mm dimensions: 3975 x 2935 x 2555 mmm Equipped with a crane runway (monorail) with three chain hoists Hedpfx Aaeykavxolenh Producer: STHAL Year: 2011 Lifting capacity: 3 x 400 kg Lenght of crane runway: ca. 3500 mm Rolling chassis Lifting capacity: 400 kg Lifting height: 3000 mm stroke speed - main stroke: 4 m/min stroke speed - fine stroke: 1 m/min The vulcanizing press from manufacturer PAN STONE, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, working width: 250 mm, total width: 2,350 mm, total length: 815 mm, total height: 1,650 mm, DGUV certified until: 03/2027, type of input current: three-phase, overall weight: 400 kg, conveyor belt width: 250 mm, year of last overhaul: 2026, Roll Line Lippelt Mini Rustica GS Divider head machine for square specialty rolls with guillotine and punching device Integrated flour duster for infeed belt LED controls, stainless steel construction NEW conveyor belts Hnodpsx I U Thofx Aaleh Machine is mobile Only from us: DGUV V3 tested Connection: 400V, 16ACEE plug Dimensions: 2350 x 815 x 1650 mm (W x D x H) Used machine, cleaned and workshop tested with warranty + spare parts service Options: Rumo seed applicator station Cutting roller Punching Maintenance contract Service package Spare parts box Delivery service Commissioning & training More roll lines in stock!

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 2026, Bun Divider Press Fortuna Semi-Automatic Gr. 4 Semi-automatic 30-portion machine for perfect dough pieces Robust design for long service life Dividing head NEWLY redesigned Dough capacity up to 3300g Hodpfex Ht E Tsx Aalenh Space-saving design Connection: 400V, 16A CEE plug Dimensions: 580 x 580 x 1350 mm (W x D x H) Refurbished used machine Quality from a specialist workshop! Benefit from over 35 years of experience! Options: Stainless steel pedestal New pressing plate Service package Maintenance contract Training & commissioning Delivery service Here you'll find your dough divider!

Condition: reconditioned (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 03/2027, type of input current: three-phase, year of last overhaul: 2026, Roll Press Fortuna Automat A 3 H+ Dough dividing and rounding machine TOP model with rounding shut-off Head cleaning to the rear Dividing head with NEW stainless steel knife Dough loading up to 2400g Dough divider with 3 new rounding plates Connection: 400V, 16A CEE plug Dimensions: 720 x 800 x 1510 mm (WxDxH) Refurbished used machine with warranty + spare parts service Quality from a professional workshop! Benefit from over 35 years of experience! Options: Platform or chassis New rounding plates Delivery service Maintenance contract Spare parts box Training & commissioning Hsdpfxjxduwij Aalonh Visit our large showroom!

Condition: excellent (used), Year of construction: 2003, Perforated Plate Press Schafberger + Sprödhuber (S+S Maschinenbau) Type LPP - SPECIAL FORMAT Universal Gluing Stand / Frame Press Pressing area approx. L x W 3800 x 3000 mm Installation depth approx. 1300 mm 6 hand hydraulic cylinders with integrated pressure relief valve, 60 mm stroke, max. pressing force 2,000 kg, pressure force finely adjustable with hand lever, cylinder can be swiveled 360° Including access ladder - on casters, pull-over NEW MAGNETIC LOCKS Ideal press for joinery shops that produce frames, solid wood panels, or windows in special shapes. Equipped with various pressing elements, see photos. Note: Used Machines: Hnjdpfetgq Ibjx Aaljh • Errors in technical specifications and subject to prior sale. • Prices quoted are for pickup from location - free shipping! Prices quoted are for pickup from location - free shipping! • The machines have been cleaned and functionally tested. • All machines are sold as is, without any warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only respond to inquiries if you provide your address and telephone number!)

Condition: new, Technische Daten: Abmessungen der Heizplatten 3000 x 1300 mm Anzahl der Heizplatten 2 # Anzahl der Presszylinder 6 # Pressdruck 90 t (900 kN) Zylinderdurchmesser 70 mm Anzahl der Etagen 1 # Etagenöffnung ca. 400 mm Anschlussleistung ca. 21,0 kW ELEKTRISCH BEHEIZBARE TISCHE (ELKOM - Deutschland) Der Tisch besteht aus 2 kalibrierten Aluminiumplatten, in denen die elektrischen Widerstände verlegt sind. Die maximale Betriebstemperatur ist 120 Grad C. Im am Tisch wird eine Dämmplatte montiert, die zur Wärmeisolierung gegenüber der Presse dient. Der Bau des Tisches und die präzise Verarbeitung, die von spezialisierten Firmen vorgenommen werden, gewährleisten eine sehr gleichmäßige Verteilung der Temperatur. Die Heizplatten sind mit speziellen Halterungen an der Presse befestigt um die Wärmeausdehnung zu erlauben, außerdem erleichtern sie die Wartung und das Auswechseln. Spezifischer Betriebsdruck des Tisches bis zu 10 kg/cm2 Max. Temperatur der Heizplatte 120 Grad C Arbeitstemperatur 90 Grad C Schuetzsteuerung Waermeschutzschalter Die Zylinder sind aus spezial geschweissten und gross dimensionierten Stahlrohren hergestellt. Hydraulik: Kompakte hydraulische Einheit Fabrikat HAWE aus Deutschland. Pumpe fuer Schliessphase und Druckaufbauphase. Automatische Nachdruckverstellung Leistung der hydraulischen Einheit 3 kW Bewegung des Presstisch von unten nach oben. Pressengestell: Das Pressengestell besteht aus einer schweren verwindungssteifen und spannungsfrei geschweissten Stahlkonstruktion. Beide Presstische sind aus HEA-Profilen geschweisst. Die Bearbeitung der Baugruppen erfolgt auf CNC-Barbeitungsmaschinen. Bewegung des Presstisches mit Zahnstangen und Parallelfuehrung an 2 Ecken des Presstisches aus selbstschmierenden Material. BEDIENTAFEL mit Display und Tastatur: Bedientafel Siemens mit 7-Zoll-Farb-Touchscreen mit Verbindung zum Ethernet- Netzwerk für den Fernwartungsservice. Das System ist mit einer eigenen Software ausgestattet durch die die Bedienung der Presse einfach und intuitiv erfolgen kann. Sie können folgende Parameter programmieren, abrufen und ändern: - Automatische Regelung des hydraulischen Drucks aufgrund des Werkstückgrösse und des gewünschten spezifischen Drucks. Das System reguliert den Druck der Zylinder automatisch und der Bediener muss keine Berechnungen mit Grafiken oder Tabellen anstellen. - Möglichkeit zum Speichern von bis zu 100 Arbeitsrezepten (Temperatur, spezifischer Druck, Pressdauer, Plattengrösse). - Direkteinstellung des hydraulischen Drucks der Zylinder mit digitaler Kontrolle aufgrund der Grafik. Dieses System kann alternativ zur automatischen Regulierung verwendet werden, falls Sie lieber mit der herkömmlichen Methode arbeiten. - Elektronische Regelung der Pressdauer Hnjdpfx Asfh Tmmealoh - Elektronische Kontrolle der Temperatur der Tische - Automatische Wiederherstellung des Drucks aufgrund des Nachgebens des Materials. - Komplette Diagnostik und Störungsanzeige mit Meldungen am Display. WEITERE AUSSTATTUNG UND MERKMALE DER PRESSE Haken zum Anheben der Maschine um das Laden/ Entladen der Maschine beim Transport zu erleichtern. Nivelliervorrichtungen die an den Füssen der Presse montiert sind. In die Presse integrierte Schalttafel; dadurch sind weniger Aussenkabel notwendig, die vorhandenen sind jedoch auf jeden Fall angemessen geschützt. inkl. Option: Fehlbelegungsüberwachung (Ebenheitskontrolle)

Condition: excellent (used), Year of construction: 1993, OTT Model JU 2513 Hydraulic veneer press with electric heating plates Under-piston design BUSSE electric heating plates Central control panel with all operating elements Hodpfx Aasxgpaqelsnh Analog temperature display for both heating plates Pressing pressure infinitely adjustable via pressure switch device Main switch Two-stage hydraulic pump with automatic switching valve from low to high pressure Emergency safety pull cord Rack compensation Stroke limitation CE compliant Press area: 2500 x 1300 mm Number of press cylinders: 4 Total pressing force: 70 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 20.3 kW Required space (L x W x H): approx. 2900 x 1250 x 1900 mm Weight: approx. 3200 kg

Condition: good (used), Year of construction: 1989, Pressing area 2550 x 1350 mm Number of press cylinders #6 Total pressing force 140 t Opening width approx. 400 mm Operating voltage: 3 x 400 V + N, 50 Hz. Total connected load approx. 26 kW Space requirement (L x W x H) approx.: 3400 x 1600 x 2000 mm Weight: approx. 5500 kg Hydraulic hot plate press Down-piston design Electric hot platens Pressing pressure continuously adjustable via pressure switch Hydraulic pump Central control panel with all operating and Digital temperature display for both hot platens Press cycle counter Safety ripcord Hodpfjwd N Rmjx Aaljnh Rack compensation Main switch Note for used machines: • Errors in technical specifications and subject to prior sale. • Subject to change without notice. • Prices quoted are for pickup from the location - free shipping! • The machines have been cleaned and functionally tested. • All machines are sold as seen, without any warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only respond to inquiries if you provide your address and telephone number!)

Year of construction: 2012, condition: excellent (used), COLUMBUS Vacuform Standard High-performance vacuum pump BECKER Vacuum tank 200 l Digital pressure regulation Digital vacuum gauge Highly elastic natural rubber membrane Sturdy worktable Swivel castors with brakes Working dimensions approx. L x W 2900 x 1300 mm Pressing pressure max. 0.85 kg/cm2 = approx. 29 t Connected load 0.75 kW, 400 V 50 Hz Tank capacity 200 l Hodjxgg Tbepfx Aaljnh CE Transport dimensions approx. L x W 3100 x 1550 mm Weight approx. 400 kg

Condition: excellent (used), Year of construction: 2006, sieve 6 mm engine 2x90 kW ca. 660 mm 2 Hnedpfx Aajyi Ht Ielsh Capacity ca. 3.000 - 5.000 kg/h

Condition: used, Double-column hydraulic press SCHÖN Type UTE/B 50 Machine No. 5509, Year of manufacture 1971 Pressure capacity 50 tons Column width 550 mm Column side clearance 150 mm Table surface 480 x 380 mm Table opening Ø 70 mm Ram surface 490 x 280 mm Clamping pin bore Ø 40 mm Max. ram stroke 150 mm Max. installation height 390 mm Table height above floor 890 mm Rapid forward speed approx. 130 mm/sec. Working speed approx. 20 mm/sec. Return speed approx. 130 mm/sec. Motor power: 4 kW Power supply: 380 volts, 50 Hz - Continuous press force adjustment - Rapid stroke and working stroke - Pressure- or stroke-dependent stroke limitation - Adjustable pressure hold time, press time extension 0.5-6 seconds Hsdpfxjv Srfws Aaljnh - Mechanically adjustable fixed stop via handwheel on the ram - SICK light barrier, type LVU - Stroke counter - Double column guide on the ram Space requirement: L x W x H: 1100 mm x 1050 mm x 2320 mm Weight: approx. 1.5 tons Good condition

Condition: like new (used), Year of construction: 2015, Takeuchi TB 228 mini excavator year of production 2015 TECHNICAL PARAMETERS Parameter Value Operating weight 2,770 kg Maximum digging depth 2,875 mm Maximum dumping height 3,190 mm Maximum reach 4,850 mm Arm length 1,445 mm Rotational speed 10 rpm Traction force 2,873 kg Lifting capacity 530 kgPOWER Parameter Value Make / Model Yanmar / 3TNV82 EPA Tier 4 emission standard Cylinders / Capacity 3 / 1.3 L Gross power (SAE J1995) 18.1 kW (24.3 hp) Net power (SAE 1349) 17.5 kW (23.5 hp) Nominal speed 2,400 rpm Fuel tank capacity 53.0 L Fuel consumption (65% full load) 3.0 L Electrical system 12 V / 40 A ELECTRICAL Hnedpfx Aetwwufjaloh Parameter Value Coolant temperature and fuel level indicator Yes Audible and/or visual signals Yes 12-volt system with 40-amp alternator Yes Work lights Arm, side cover Engine heating Yes Hour counter Yes Trip alarm Yes Chassis and frame Parameter Value Two-speed drive with automatic shift Yes Heavy-duty dozer blade Yes Cast iron protective counterweight Yes Rubber tracks with a width of 300 mm

Condition: like new (used), Year of construction: 2018, BOBCAT E26 EM mini excavator - 320mm crawler - year of production 2018 - 2660 mth Engine Engine manufacturer Kubota Engine power 15.3 (at 2400 rpm) kW Engine model D1105-E2B-BCZ-2 Type of fuel diesel Number of cylinders 3 Displacement 1.123 l Torque 71.2 Nm Cooling water Dimensions Overall height 2357 mm Ground clearance 532 mm Width (min/max depending on track spacing) 1398 mm Track width 320 mm Weights Ground pressure geostatic pressure 33.5 kPa Operating weight with protective frame 3069 kg Working weight with enclosed and heated cab 3188 kg Hydraulic system Pump capacity 2 x 28.8 l/min Decompression pressure of connected circuits 290 bar Auxiliary flow 48 l/min Traction Climbing capacity 30 ° Low speed (forward/reverse) 2.4 km/h High speed (forward/reverse) 4.6 km/h Performance Maximum digging depth (standard and long boom) 2890 mm Maximum dumping height (standard and long boom) 3239 mm Maximum reach at ground level (standard and long boom) 4529 mm Digging force on boom (standard and long boom) 13200/15800 Nm Digging force bucket 22200 Nm Pulling force 30200 Nm Rotation system Boom rotation left 60 ° Boom rotation to the right 60 ° Rate of rotation 9.3 rpm Hnodpfotwwr Rox Aalsh Fluid volume Fuel tank capacity 34.6 l

Condition: used, Year of construction: 1994, operating hours: 62,058 h, functionality: limited functionality, machine/vehicle number: 099314, bale width: 770 mm, bale height: 520 mm, Manufacturer: COMDEC - PAAL Model: LV2020PFT Serial number: 099314 Year of manufacture: 1994 Hnsdpfx Aet Ucqfealeh Maximum capacity: 25,000 kg/h Bale discharge dimensions: 77 cm x 52 cm The press was in operation until the production line was shut down.

Condition: good (used), functionality: fully functional, Year of construction: 2008, Electromechanical Press Brake Manufacturer: TRUMPF Model: TruBend 7018 Year: 2008 Technical Data Make: TRUMPF Model: TruBend 7018 Year of manufacture: 2008 Pressing force: 18 t Stroke: max. 150 mm Bending length: 510 mm Frame gap: 422 mm Power supply: 5 kVA Space requirements: L 1295 x W 1320 x H 2380 mm Weight: approx. 1,800 kg Standard Equipment - Robust machine frame - Press beam - High-dynamic electronic direct drive (torque motor) - Inductive length measuring system with temperature compensation - Control cabinet air conditioning - Ergonomic machine design Special Equipment - Tool clamping system (Wila) top and bottom - Integrated TRUMPF TASC 6000 CNC control - Safety light curtain at the front - Backgauge system: 6 axes: X1, X2, R1, R2, Z1, Z2 Hnjdpfxoyir Sve Aaloh - Comfort support table - BendGuard (with block laser) Safety - Side-mounted, pivoting safety doors - Two-pedal foot switch, for both standing and seated operation - CE certification Tooling Upper tool: straight punch R1/86°, H 120 mm, L 500 mm, segmented Lower tool: V-die V6/84°, R 0.6, H 100 mm, L 500 mm, segmented All information given without guarantee. Machine demonstration under power is possible at any time in our showroom.

Condition: used, 2 Color Printing Press Heidelberg SM52-2+ - Plus Version - in good working condition. 2 Color Offset Press Heidelberg SM52-2+ Baujahr / Year 2005 - Serial-No. 207354 Druckzahl / Impressions 46 Mio. Format / Size min. 105 x 145mm - max. 370 x 520mm Hnodpfsyiftqex Aalsh Papierdickenbereich / Paper thickness 0,06 - 0,4mm Feuchtwerk mit Kühlung / Dampening System Alcolor - Baldwin Refrigeration CP-Tronic Autoplate Plus Version Farbwalzenwascheinrichtung / Ink roller wash-up device Gummituchwascheinrichtung / Blanket wash-up device Speed 15.000 Sheet Per Hour Powder Spray Grafix Alphatronic 200 Inklusive Handbücher / Manuals Included Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), functionality: fully functional, Year of construction: 2017, Hydraulic Press Brake Make: BYSTRONIC Model: Xpert 40/1030 Year: 2017 Technical Specifications Manufacturer: BYSTRONIC Model: Xpert 40/1030 Year of manufacture: 2017 Press force: 40 t Bending length: 1030 mm Stroke: 200 mm Distance between uprights: 1060 mm Motor power: 7.5 kW Dimensions: L 1.52 x W 1.60 x H 2.45 m Weight: 4 t Hedpfx Aoyim Txsalsnh Equipment • 6-axis backgauge • Hydraulic clamping top & bottom • RF-A upper tool holder • Height-adjustable ByVision Bending display with 22'' Full HD touchscreen • Support table • Ergo LED work area lighting • Low-noise Dynamic Drive System (DDS) with integrated EnergySaver • OPC interface for bending • Bend curve generator • Automatic tool overload protection • Rear sliding door with electrical monitoring • Oil cooler • Ergo foot switch • Upper tool, straight R1/30°, H 250mm, L 1,000mm, segmented • Upper tool, gooseneck R1.5/85°, H 175mm, L 1,000mm, segmented • Lower tool V10/30°, H 55mm, L 1,000mm, segmented All information subject to change. A live demonstration under power is possible at any time in our showroom.

Condition: used, functionality: fully functional, Year of construction: 1986, Hydraulic Press Brake Make: LVD Model: PPBL 135/40 MNC Year of manufacture: 1986 Technical Details Manufacturer: LVD Model: PPBL 135/40 MNC Year: 1986 Usable bending length: 4000 mm Stroke: 120 mm Press force: 135 t Dimensions: approx. L 4.20 x W 1.40 x H 2.65 m Weight: 8.7 t Equipment • Motorized backgauge 500 mm • Motorized adjustment of bending beam via +/- buttons with digital display • Upper tool straight, H 100mm, R 0.65/30°, L = 4000mm, segmented • Lower tool 2-V die V 12/30° + V8/30°, L = 4100mm Hnedpfx Aoyilu Ijaloh All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: like new (used), Year of construction: 2014, 4 meter width Hjdpelqwvkofx Aaljnh Nominal pressure 1250 kN CNC Back Gauge Quick Change Tooling

Condition: used, Year of construction: 1984, Plate dimensions 3000 x 1350 mm Daylight opening 400 mm Number of daylights 1 St. Total pressure 3,5 - 5,5 to Dimensions (L/W/H) 3530 x 1520 mm weight of the machine ca. 6500 kg Number of pressing cylinders 6 Stk. Ott Veneer Press Type Stabil-3013 ----- Technical Manufacturer's Description: -Pressing area: 2,500 × 1,350 mm Hsdpfsyif S Tsx Aaljnh -6 cylinders -Replaceable aluminum plates -Protective film -Plate size: 3,000 x 1,350 mm -Total pressing force: 135 t, 3.5 - 5.5 kg/cm² -Operating pressure, max. 340 bar -Pressure cylinders: 6 x 90 mm diameter -Opening width: 400 mm -Weight with 2 plates: approx. 6,300 kg -Overall length: 3,530 mm -Overall width: 1,520 mm -Overall height with 2 plates: 2,000 mm -Motor power rating: 2.2 kW -Power rating per electric heating plate: 11.2 kW -Consumption per plate: Approx. 4.5 kW/h -Heating time 20 - 100 degrees Celsius: approx. 20 min -Consumption per hot water heating plate: approx. 9000 W/h ----- Price of the above-mentioned machine available upon request! ----- (Technical specifications according to the manufacturer - without guarantee!) All prices quoted are net prices, excluding VAT.

Condition: good (used), input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 03/2027, type of input current: three-phase, Dough Divider and Rounder Record Automat Roll Press for dividing and rounding Dough input from 750 to 2550 grams Hedporhfp Uefx Aalsnh 30 pieces / 25 to 85 grams per piece with 3 rounding plates Connection: 400V, 16A-CEE plug Dimensions: 690 x 580 x 1650 mm (W x D x H) Used machine Delivery service Many more roll presses in stock!

Condition: good (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 03/2027, type of input current: three-phase, overall weight: 1,000 kg, König Mini Rex 4000-S with proofing cabinet G 2000 For round, stamped, long-rolled, single-action long-rolled, and rustic rolls 2-row head machine, swivels up to 45° Output up to 2,400 pcs/hr 2-row proofing cabinet with long roller and stamping unit Output up to 2,000 pcs/hr Hsdpfswyrumsx Aalonh Used machine Delivery service available Visit our large bakery machinery warehouse!

Condition: like new (used), Year of construction: 2019, operating hours: 66 h, functionality: fully functional, Size 60 x 75 cm, Presscenter XL 2, program-controlled wash-up device for inking rollers, blanket wash, and impression cylinder wash, Alcolor Vario dampening system, Combistar air-cooled cooling and recirculation unit, Autoplate, antistatic device in the feeder, double sheet detector, Weko AP 262 powder spray unit, AMS LED UV dryer, maximum paper thickness 0.8 mm, maximum speed 15,000 sheets/h, perfecting 2-3 or 5- Hjdpfxeykr Rze Aalonh